Tuning manganese (III) species in manganese oxide octahedral molecular sieve by interaction with carbon nanofibers for enhanced pollutant degradation in the presence of peroxymonosulfate

Mediating peroxymonosulfate activation path in Fenton-like reaction via doping different metal atoms into g-C3N5

Peroxymonosulfate (PMS) could be activated by either radical path or non-radical path, how to rationally mediate these two routines was an important unresolved issue. This work has introduced a simple way to address this problem via metal atom doping. It was found that Fe-doped nitrogen-rich graphitic carbon nitride (Fe-C3N5) exhibited high activity towards PMS activation for tetracycline degradation, and the degradation rate was 3.14 times higher than that of Co-doped nitrogen-rich graphitic carbon nitride (Co-C3N5). Radical trapping experiment revealed the contributions of reactive species over two catalysts were different. Electron paramagnetic resonance analysis further uncovered the non-radical activation path played a dominated role on Fe-C3N5 surface, while the radical activation path was the main routine on Co-C3N5 surface. Density functional theory calculations, X-ray photoelectron spectroscopy analysis, and electrochemical experiments provided convincing evidence to support these views. This study supplied a novel method to mediate PMS activation path via changing the doped metal atom in g-C3N5 skeleton, and it allowed us to better optimize the PMS activation efficiency.

A new multimodal magnetic nanozyme and a reusable peroxymonosulfate oxidation catalyst: Manganese oxide coated-monodisperse-porous and magnetic core-shell microspheres

Monodisperse-porous, polydopamine and manganese oxide coated, core-shell type, magnetic SiO2 (MagSiO2@PDA@MnO2) microspheres 6.4 μm in size were synthesized for the first time, using magnetic, monodisperse-porous SiO2 (MagSiO2) microspheres 6.2 μm in size as the starting material. MagSiO2 microspheres were obtained by a recently developed method namely "staged shape templated hydrolysis and condensation protocol". In the synthesis, MagSiO2 microspheres were consecutively coated by polydopamine (PDA) and then by a MnO2 layer in the aqueous medium. The pore volume and the specific surface area of monodisperse-porous MagSiO2@PDA@MnO2 microspheres were measured as 0.59 cm3 g-1 and 154 m2 g-1, respectively. Their Mn and Fe contents were determined as 66 ± 1 mg g-1 and 165 ± 5 mg g-1 respectively. MagSiO2@PDA@MnO2 microspheres exhibited multimodal enzyme mimetic behavior with highly superior catalase-like, oxidase-like and peroxidase-like activities. The effective production of singlet oxygen (1O2) and superoxide anion (O2-*) radicals in MagSiO2@PDA@MnO2-peroxymonosulfate (PMS) system was demonstrated by ESR spectroscopy. By evaluating this property, MagSiO2@PDA@MnO2 microspheres were tried as a reusable catalyst for dye removal via peroxymonosulfate (PMS) activation in batch experiments for the first time. The degradation runs were made with, rhodamine B (Rh B), methyl orange (MO) and methylene blue (MB) as the pollutant. The core-shell type design allowing the deposition of porous MnO2 layer onto a large surface area provided very fast, instant removals with all dyes, via both physical adsorption and degradation via PMS activation. In the reusability experiments, the removal yields of MO and Rh B decreased 1.8% and 8.9% over five consecutive runs in batch fashion. MagSiO2@PDA@MnO2 microspheres exhibited very good functional and structural stability in consecutive dye degradations. No significant change was observed in Fe content of microspheres while Mn content exhibited a decrease of 7.4% w/w over 5 consecutive degradation runs.

Peroxymonosulfate activation with an α-MnO2/Mn2O3/Mn3O4 hybrid system: parametric optimization and oxidative degradation of organic dye

The present study proposed the synthesis of low-toxicity and eco-friendly spherically shaped manganese oxides (α-MnO₂, Mn₂O₃, and Mn₃O₄) by using the chemical precipitation method. The unique variable oxidation states and different structural diversity of manganese-based materials have a strong effect on fast electron transfer reactions. XRD, SEM, and BET analyses were used to confirm the structure morphology, higher surface area, and excellent porosity. The catalytic activity of as-prepared manganese oxides (MnO_x) was investigated for the rhodamine B (RhB) organic pollutant with peroxymonosulfate (PMS) activation under the condition of control pH. In acidic conditions (pH = 3), complete RhB degradation and 90% total organic carbon (TOC) reduction were attained in 60 min. The effects of operating parameters such as solution pH, PMS loading, catalyst dosage, and dye concentration on RhB removal reduction were also tested. The different oxidation states of MnO_x promote the oxidative-reductive reaction under acidic conditions and enhance the SO₄^•-/^•OH radical formation during the treatment, whereas the higher surface area offers sufficient absorption sites for interaction of the catalyst with pollutants. A scavenger experiment was used to investigate the generation of more reactive species that participate in dye degradation. The effect of inorganic anions on divalent metal ions that genuinely occur in water bodies was also studied. Additionally, separation and mass analysis were used to investigate the RhB dye degradation mechanism at optimum conditions based on the intermediate's identification. Repeatability tests confirmed that MnO_x showed superb catalytic performance on its removal trend.

Metal-carbon hybrid materials induced persulfate activation: Application, mechanism, and tunable reaction pathways

Proper wastewater treatment has always been the focus of human society, and many researchers have been working to find efficient and stable wastewater treatment technologies. Persulfate-based advanced oxidation processes (PS-AOPs) mainly rely on persulfate activation to form reactive species for pollutants degradation and are considered to be one of the most effective wastewater treatment technologies. Recently, metal-carbon hybrid materials have been diffusely used for PS activation because of their high stability, abundant active sites, and easy applicability. Metal-carbon hybrid materials can successfully overcome the shortcomings of onefold metal catalysts and carbon catalysts by combing the complementary advantages of the two components. This article reviews recent studies about metal-carbon hybrid materials-mediated PS-AOPs for wastewater decontamination. The interactions of metal and carbon materials, as well as the active sites of metal-carbon hybrid materials, are introduced first. Then, the application and mechanism of metal-carbon hybrid materials-mediated PS activation are presented in detail. Lastly, the modulation methods of metal-carbon hybrid materials and their tunable reaction pathways were discussed. The prospect of future development directions and challenges is proposed to facilitate metal-carbon hybrid materials-mediated PS-AOPs to take a step further for practical application.

Nitrogen doped bimetallic sludge biochar composite for synergistic persulfate activation: Reactivity, stability and mechanisms

As a recycling use of waste activated sludge (WAS), we used high-temperature pyrolysis of WAS to support bimetallic Fe-Mn with nitrogen (N) co-doping (FeMn@N-S), a customized composite catalyst that activates peroxysulphate (PS) for the breakdown of tetracycline (TC). First, the performance of TC degradation was evaluated and optimized under different N doping, pH, catalyst dosages, PS dosages, and contaminant concentrations. Activating PS with FeMn@N-S caused the degradation of 91% of the TC in 120 min. Next, characterization of FeMn@N-S by XRD, XPS and FT-IR analysis highlights N doping is beneficial to take shape more active sites and reduces the loss of Fe and Mn during the degradation reaction. As expected, the presence of Fe-Mn bimetallic on the catalyst surface increases the rate of electron transfer, promoting the redox cycle of the catalyst. Other functional groups on the catalyst surface, such as oxygen-containing groups, accelerated the electron transfer during PS activation. Free radical quenching and ESR analysis suggest that the main contributor to TC degradation is surface-bound SO₄^•-, along with the presence of single linear oxygen (¹O₂) oxidation pathway. Finally, the FeMn@N-S composite catalyst exhibits excellent pH suitability and reusability, indicating a solid practicality of this catalyst in PS-based removal of antibiotics from wastewater.

Light and nitrogen vacancy-intensified nonradical oxidation of organic contaminant with Mn (III) doped carbon nitride in peroxymonosulfate activation

Recently, Mn-based materials have a great potential for selective removal of organic contaminants with the assistance of oxidants (PMS, H₂O₂) and the direct oxidation. However, the rapid oxidation of organic pollutants by Mn-based materials in PMS activation still presents a challenge due to the lower conversion of surface Mn (III)/Mn (IV) and higher reactive energy barrier for reactive intermediates. Here, we constructed Mn (III) and nitrogen vacancies (Nv) modified graphite carbon nitride (MNCN) to break these aforementioned limitations. Through analysis of in-situ spectra and various experiments, a novel mechanism of light-assistance non-radical reaction is clearly elucidated in MNCN/PMS-Light system. Adequate results indicate that Mn (III) only provide a few electrons to decompose Mn (III)-PMS* complex under light irradiation. Thus, the lacking electrons necessarily are supplied from BPA, resulting in its greater removal, then the decomposition of the Mn (III)-PMS* complex and light synergism form the surface Mn (IV) species. Above Mn-PMS complex and surface Mn (IV) species lead to the BPA oxidation in MNCN/PMS-Light system without the involvement of sulfate (SO₄^{• ̶}) and hydroxyl radicals (•OH). The study provides a new understanding for accelerating non-radical reaction in light/PMS system for the selective removal of contaminant.

Co-pyrolysis technology for enhancing the functionality of sewage sludge biochar and immobilizing heavy metals

Sewage sludge (SS) is a frequent and challenging issue for countries with big populations, due to its massive output, significant hazard potential, and challenging resource utilization. Pyrolysis can simultaneously realize the reduction, harmlessness and recycling of SS. Co-pyrolysis offers a wide range of potential in terms of increasing product quality and immobilizing heavy metals (HMs), thanks to its capacity to use additives to address the mismatch between SS characteristics and pyrolysis. High-value utilization potential of SS biochar is the key to evaluating the advancement of treatment technology. A further requirement for using biochar resources is the immobilization and bioavailability reduction of HMs. Due to the catalytic and synergistic effects in the co-pyrolysis process, co-pyrolysis SS biochar exhibits enhanced functionality and has been applied in soil improvement, pollutant adsorption and catalytic reactions. This review focuses on the research progress of different additives in improving the functionality of biochar and influencing the behavior of HMs. The key limitation and challenges in SS co-pyrolysis are then discussed. Future research prospects are detailed from seven perspectives, including pyrolysis process optimization, co-pyrolysis additive selection, catalytic mechanism research of process and product, biochar performance improvement and application field expansion, cooperative immobilization of HMs, and life cycle assessment. This review will offer recommendations and direction for future research paths, while also assist pertinent researchers in swiftly understanding the current state of SS pyrolysis research field.

Comparative study of the performance of controlled release materials containing mesoporous MnOx in catalytic persulfate activation for the remediation of tetracycline contaminated groundwater

Controlled release materials (CRMs) are an emerging oxidant delivery technique for in-situ chemical oxidation (ISCO) that solve the problems of contaminant rebound, backflow and wake during groundwater remediation. CRMs were fabricated using ordered mesoporous manganese oxide (O-MnOx) and sodium persulfate (Na₂S₂O₈) as active components, for the removal of antibiotic pollutants from groundwater. In both static and dynamic groundwater environments, persulfate can first be activated by O-MnOx within CRMs to form sulfate radicals and hydroxyl radicals, with these radicals subsequently dissolving out from the CRMs and degrading tetracycline (TC). Due to their excellent persulfate activation performance and good stability, the constructed CRMs could effectively degrade TC in both static and dynamic simulated groundwater systems over a long period (>21 days). The TC removal rate reached >80 %. Changing the added content of O-MnOx and persulfate could effectively regulate the performance of the CRMs during TC degradation in groundwater. The process and products of TC degradation in the dynamic groundwater system were the same as in the static groundwater system. Due to the strong oxidizing properties of sulfate radicals and hydroxyl radicals, TC molecules were completely mineralized within the groundwater systems, resulting in only trace levels of degradation products being detectable, with low- or non-toxicity. Therefore, the CRMs constructed in this study exhibited good potential for practical application in the remediation of organic pollutants from both static and dynamic groundwater environments.

Recent Advances on Membranes for Water Purification Based on Carbon Nanomaterials

Every year the problem of water purification becomes more relevant. This is due to the continuous increase in the level of pollution of natural water sources, an increase in the population, and sharp climatic changes. The growth in demand for affordable and clean water is not always comparable to the supply that exists in the water treatment market. In addition, the amount of water pollution increases with the increase in production capacity, the purification of which cannot be fully handled by conventional processes. However, the application of novel nanomaterials will enhance the characteristics of water treatment processes which are one of the most important technological problems. In this review, we considered the application of carbon nanomaterials in membrane water purification. Carbon nanofibers, carbon nanotubes, graphite, graphene oxide, and activated carbon were analyzed as promising materials for membranes. The problems associated with the application of carbon nanomaterials in membrane processes and ways to solve them were discussed. Their efficiency, properties, and characteristics as a modifier for membranes were analyzed. The potential directions, opportunities and challenges for application of various carbon nanomaterials were suggested.

Catalytic oxidation of sulfachloropyridazine by MnO2: Effects of crystalline phase and peroxide oxidants

Catalytic activation of different oxidants including peroxymonosulfate (PMS), peroxydisulfate (PDS), hydrogen peroxide (H₂O₂) and ozone (O₃) by MnO₂ for degradation of sulfachloropyridazine (SCP) was investigated and the effects of different crystalline phases of MnO₂ including nanowire α-MnO₂, nanorod β-MnO₂, nanofiber γ-MnO₂, and nanosphere δ-MnO₂ on catalytic ozonation of SCP were also studied. The SCP degradation and total organic carbon removal indicated that the oxidation efficiency of the peroxide oxidants followed an order of O₃/MnO₂ > PMS/MnO₂ > PDS/MnO₂ > H₂O₂/MnO₂. In catalytic ozonation, SCP degradation rate constants of different MnO₂ phases followed an order of δ-MnO₂ > α-MnO₂ > γ-MnO₂> β-MnO₂. Electron paramagnetic resonance (EPR) suggested that hydroxyl radicals (·OH) and singlet oxygen (¹O₂) might be more significant for SCP degradation than sulfate (SO₄^·-) and superoxide (·O₂^-) radicals. Radical competition experiments demonstrated that ¹O₂ and ·OH contributed to 63.16% and 28.07%, respectively, for the catalytic ozonation of SCP. It was also found that more oxygen vacancies, specific surface area and exposure of MnO₆ edges could facilitate the activation of O₃ for ¹O₂ and ·OH productions and SCP degradation. The degradation pathways of SCP could mainly follow the cleavage of S-C or S-N bond and dechlorination, accompanied by hydroxylation and oxidation.

Synthesis of polyimide-modified carbon nanotubes as catalyst for organic pollutant degradation via production of singlet oxygen with peroxymonosulfate without light irradiation

Polyimide-modified carbon nanotubes (PI/CNTs) were synthesized via a solvent-free thermal method and used as a metal-free catalyst to activate peroxymonosulfate for organic contaminant degradation without light irradiation. The characterization results suggested that PI was loaded onto the surface of CNTs. The catalytic ability of the PI/CNTs was strongly correlated with the content of PI in the catalysts. The PI/CNTs (22% of PI) showed the highest catalytic efficiency for organic pollutant degradation at room temperature. The degradation efficiency of acid orange 7 (AO7) dye was significantly enhanced to 98.9% within 15 min, compared to the efficiency of 2.2% exhibited by pure PI. The radical quenching tests and electron paramagnetic resonance spectrometry proved that singlet oxygen, instead of hydroxyl radicals or sulfate radicals, played a dominant role during the catalytic oxidation of AO7. The influences of operation parameters including temperature and catalyst amount were investigated. The PI/CNTs metal-free catalyst exhibited high catalytic activity under a broad range of pH values. The recycling study of four repeated reactions demonstrated good stability of the PI/CNTs. This work provided a promising metal-free catalyst for degradation of organic pollutants in aqueous solutions, contributing to the development of green materials for sustainable remediation.

Aerobic oxidative dehydrogenation of N-heterocycles over OMS-2-based nanocomposite catalysts: preparation, characterization and kinetic study

OMS-2-based nanocomposites doped with sodium phosphotungstate were prepared and their remarkably enhanced catalytic activity and recyclability in aerobic oxidative dehydrogenation of N-heterocycles were examined in detail.

Mn-based catalysts for sulfate radical-based advanced oxidation processes: A review

Sulfate radical-based advanced oxidation processes (AOPs) have drawn increasing attention during the past two decades, and Mn-based materials have been proven to be effective catalysts for activating peroxymonosulfate (PMS) and peroxydisulfate (PDS) to degrade many contaminants. This article presents a comprehensive review of various Mn-based materials to activate PMS and PDS. The activation mechanisms of different Mn-based catalysts (i.e., Mn oxides MnO_x, MnO_x hybrids, and MnO_x‑carbonaceous material composites) were first summarized and discussed in detail. Besides the commonly reported free radicals (SO₄^-• and ^•OH), non-radical mechanisms such as singlet oxygen and direct electron transfer have also been discovered for selected materials. The effects of pH, inorganic ions, natural organic matter (NOM), dissolved oxygen content, temperature, and the crystallinity of the materials on the catalytic reactivity were also discussed. Then, important instrumentations and technologies employed to characterize Mn-based materials and to understand the reaction mechanisms were concisely summarized. Three common overlooks in the experimental designs for examining the PMS/PDS-MnO_x systems were also discussed. Finally, future research directions were suggested to further improve the technology and to provide a guidance to develop cost-effective Mn-based materials to activate PMS/PDS.

Fabrication of homogeneous and highly dispersed CoMn catalysts for outstanding low temperature catalytic oxidation performance

A series of homogeneous and highly dispersed CoMnO_x bimetallic oxides with different ratios were prepared through pyrolysis of CoMn-MOF-71, which was applied to the catalytic oxidation of toluene.

Excellent porous environmental nanocatalyst: tactically integrating size-confined highly active MnOx in nanospaces of mesopores enables the promotive catalytic degradation efficiency of organic contaminants

A nanoporous molecular sieve catalyst containing size-confined MnO_x species, which affords excellent environmental catalytic efficiency, was synthesized using a micelle-assisted in situ embedding strategy.