Synthesis of methotrexate-loaded tantalum pentoxide–poly(acrylic acid) nanoparticles for controlled drug release applications

Stimulus-Responsive Hydrogels as Drug Delivery Systems for Inflammation Targeted Therapy

Deregulated inflammations induced by various factors are one of the most common diseases in people's daily life, while severe inflammation can even lead to death. Thus, the efficient treatment of inflammation has always been the hot topic in the research of medicine. In the past decades, as a potential biomaterial, stimuli-responsive hydrogels have been a focus of attention for the inflammation treatment due to their excellent biocompatibility and design flexibility. Recently, thanks to the rapid development of nanotechnology and material science, more and more efforts have been made to develop safer, more personal and more effective hydrogels for the therapy of some frequent but tough inflammations such as sepsis, rheumatoid arthritis, osteoarthritis, periodontitis, and ulcerative colitis. Herein, from recent studies and articles, the conventional and emerging hydrogels in the delivery of anti-inflammatory drugs and the therapy for various inflammations are summarized. And their prospects of clinical translation and future development are also discussed in further detail.

Temperature and pH-responsive PNIPAM@PAA Nanospheres with a Core-Shell Structure for Controlled Release of Doxorubicin in Breast Cancer Treatment

Stimuli-responsive polymers have been of great interest in the fabrication of advanced drug delivery systems. In this study, a facile approach was developed to synthesize a dually temperature/pH-responsive drug delivery system with a core-shell structure to control the release of doxorubicin (DOX) at the target site. For this purpose, poly(acrylic acid) (PAA) nanospheres were first synthesized using the precipitation polymerization technique and were used as pH-responsive polymeric cores. Then, poly(N-isopropylacrylamide) (PNIPAM) with thermo-responsivity properties was coated on the outer surface of PAA cores via seed emulsion polymerization technique to render monodisperse PNIPAM-coated PAA (PNIPAM@PAA) nanospheres. The optimized PNIPAM@PAA nanospheres with an average particle size of 116.8 nm (PDI= 0.243), had a high negative surface charge (zeta potential= -47.6 mV). Then, DOX was loaded on PNIPAM@PAA nanospheres and the entrapment efficiency (EE) and drug loading (DL) capacity were measured to be 92.7% and 18.5%, respectively. The drug-loaded nanospheres exhibited a low leakage at neutral pH and physiological temperature, but drug release significantly enhanced at acidic pH (pH= 5.5), indicating the tumor-environment responsive drug release behavior of the prepared nanospheres. Also, kinetics studies showed that, the sustained release of DOX from PNIPAM@PAA nanospheres was consistent with the Fickian diffusion mechanism. Moreover, the anticancer efficacy of DOX-loaded nanospheres was evaluated in vitro against MCF-7 breast cancer cells. The obtained results revealed that, the incorporation of DOX into PNIPAM@PAA nanospheres increases its cytotoxicity against cancer cells compared to the free DOX. Our results suggest that, PNIPAM@PAA nanospheres can be considered as a promising vector to release anticancer drugs with dual-stimuli responsivity to pH and temperature.

Tantalum-Zirconium Co-Doped Metal-Organic Frameworks Sequentially Sensitize Radio-Radiodynamic-Immunotherapy for Metastatic Osteosarcoma

Due to radiation resistance and the immunosuppressive microenvironment of metastatic osteosarcoma, novel radiosensitizers that can sensitize radiotherapy (RT) and antitumor immunity synchronously urgently needed. Here, the authors developed a nanoscale metal-organic framework (MOF, named TZM) by co-doping high-atomic elements Ta and Zr as metal nodes and porphyrinic molecules (tetrakis(4-carboxyphenyl)porphyrin (TCPP)) as a photosensitizing ligand. Given the 3D arrays of ultra-small heavy metals, porous TZM serves as an efficient attenuator absorbing X-ray energy and sensitizing hydroxyl radical generation for RT. Ta-Zr co-doping narrowed the highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap and exhibited close energy levels between the singlet and triplet photoexcited states, facilitating TZM transfer energy to the photosensitizer TCPP to sensitize singlet oxygen (¹ O₂ ) generation for radiodynamic therapy (RDT). The sensitized RT-RDT effects of TZM elicit a robust antitumor immune response by inducing immunogenic cell death, promoting dendritic cell maturation, and upregulating programmed cell death protein 1 (PD-L1) expression via the cGAS-STING pathway. Furthermore, a combination of TZM, X-ray, and anti-PD-L1 treatments amplify antitumor immunotherapy and efficiently arrest osteosarcoma growth and metastasis. These results indicate that TZM is a promising radiosensitizer for the synergistic RT and immunotherapy of metastatic osteosarcoma.

Electrospun Poly(acrylic acid-co-4-styrene sulfonate) as Potential Drug-Eluting Scaffolds for Targeted Chemotherapeutic Delivery Systems on Gastric (AGS) and Breast (MDA-Mb-231) Cancer Cell Lines

Potential drug-eluting scaffolds of electrospun poly(acrylic acid-co-styrene sulfonate) P(AA-co-SS) in clonogenic assays using tumorigenic gastric and ovarian cancer cells were tested in vitro. Electrospun polymer nanofiber (EPnF) meshes of PAA and PSSNa homo- and P(AA-co-SS) copolymer composed of 30:70, 50:50, 70:30 acrylic acid (AA) and sodium 4-styrene sulfonate (SSNa) units were performed by electrospinning (ES). The synthesis, structural and morphological characterization of all EPnF meshes were analyzed by optical and electron microscopy (SEM-EDS), infrared spectroscopy (FTIR), contact angle, and X-ray diffraction (XRD) measurements. This study shows that different ratio of AA and SSNa of monomers in P(AA-co-SS) EPnF play a crucial role in clonogenic in vitro assays. We found that 50:50 P(AA-co-SS) EPnF mesh loaded with antineoplastic drugs can be an excellent suppressor of growth-independent anchored capacities in vitro assays and a good subcutaneous drug delivery system for chemotherapeutic medication in vivo model for surgical resection procedures in cancer research.

Preparation of colloidal nanoparticles PVA-PHEMA from hydrolysis of copolymers of PVAc-PHEMA as anticancer drug carriers

The novel pH-responsive polymer nanoparticles have been widely used for drug delivery and cancer therapy. The pH-sensitive nanoparticles include chemical structures that can accept or donate protons in response to an environmental pH change. Polybases which mostly contain alkaline groups such as amines and hydroxy, accept protons at low pH and are neutral at higher pH values. This study aimed to prepare pH-sensitive colloidal amphiphilic poly(vinyl alcohol-2-hydroxyethyl methacrylate) (PVA-PHEMA) copolymers in cancer therapy applications. For this purpose, poly(vinyl acetate-2-hydroxyethyl methacrylate) (PVAc-PHEMA) copolymer nanoparticles were synthesized in different polymerization medium fractions from water and methanol and different monomer feed concentration. Then acetate groups were hydrolyzed, and the PHEMA-PVA nanoparticles were synthesized. The nanoparticles were further characterized using dynamic light scattering, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis to identify the structural and morphological changes. The Methotrexate (MTX) was loaded into the nanoparticles, and drug release kinetics were evaluated. The results confirmed that PHEMA-PVA copolymeric nanoparticles could be favorably used in cancer therapy.

Tantalum and its derivatives in orthopedic and dental implants: Osteogenesis and antibacterial properties

Implant-associated infections and aseptic loosening are some of the main reasons for implant failure. Therefore, there is an urgent need to improve the osseointegration and antibacterial capabilities of implant materials. In recent years, a large number of breakthroughs in the biological application of tantalum and its derivatives have been achieved. Owing to their corrosion resistance, biocompatibility, osseointegration ability, and antibacterial properties, they have shown considerable potential in orthopedic and dental implant applications. In this review, we provide the latest progress and achievements in the research on osseointegration and antibacterial properties of tantalum as well as its derivatives, and summarize the surface modification methods to enhance their osseointegration and antibacterial properties.

Injectable Nanocomposite Hydrogels for Cancer Therapy

Hydrogel is a kind of 3D polymer network with strong swelling ability in water and appropriate mechanical and biological properties, which make it feasible to maintain bioactive substances and has promising applications in the fields of biomaterials, soft machines, and artificial tissues. Unfortunately, traditional hydrogels prepared by chemical crosslinking have poor mechanical properties and limited functions, which limit their further application. In recent years, with the continuous development of nanoparticle research, more and more studies have combined nanoparticles with hydrogels to make up for the shortcomings of traditional hydrogels. In this article, the types and functions of hydrogels and nanomaterials are introduced first, as well as the functions and applications of injectable nanocomposite hydrogels (INHs), then the latest progress of INHs for cancer treatment is reviewed, some existing problems are summarized, and the application prospect of NHs is prospected.

Tantalum oxide nanoparticles as an advanced platform for cancer diagnostics: a review and perspective

The development of new safe and effective contrast agents (CAs) is a crucial factor to increase the effectiveness of computed tomography (CT). For now, tantalum oxide-based nanoparticles (TaOx NPs) are among the most promising CAs for CT due to their superior properties: high X-ray attenuation coefficient, excellent biocompatibility, and easily modifiable surface chemistry. Compared to the commercially available analogs (iodine-based CAs), TaOx NPs provide better contrast performance, long-circulation, and high safety profiles (reduced exposure of X-rays and CA dosage). Among the investigated nanoparticulate CAs they afford higher cost-effectiveness (Au, Pt, Lu). TaOx NPs can also be easily modified to include other imaging or therapeutic modalities. This review aims to summarize the current state-of-the-art knowledge in the field of tantalum oxide-based CAs used for single or multimodal imaging and theranostic purposes. The design specification of TaOx NPs in terms of size, surface functionalization, composition, and their influence on the contrast performance, toxicity, and pharmacokinetics are discussed. Finally, the future opportunities and challenges of TaOx NPs used as CT CAs are addressed.

Surfactant-free tantalum oxide nanoparticles: synthesis, colloidal properties, and application as a contrast agent for computed tomography

With the growing interest of the medical industry in biocompatible nanoparticles (NPs), the current synthetic methods should be adapted to appropriate demands (toxicity, scalability, etc.). Most applications require colloidal systems to be stable not only in water but also in vivo, which represents a major challenge. In this study, biocompatible Ta2O5 NPs were synthesized by a solvothermal method avoiding toxic reagents, and surfactant-free stable hydrosols were obtained and used for computed tomography (CT) imaging. The small hydrodynamic size (2 nm) and colloidal stability of primary NPs were studied by dynamic light scattering (DLS). The particles were characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and Brunauer-Emmett-Teller analysis to confirm their structure and purity. To develop a stable hydrosol preparation protocol, the influence of pH and ultrasonication duration on the stability of Ta2O5 sols was analyzed by DLS and microelectrophoresis. To enhance the understanding of NP behavior in vivo, sol stability in conditions close to physiological (NaCl solutions) was studied in a pH range of 3-9. Hydrosols prepared by the proposed protocol were stable for at least 6 months and exhibited negligible cytotoxicity. Ta2O5 NPs also showed high CT contrast both in theoretical calculations and in vivo (rat gastrointestinal tract).

Design of polymeric core-shell carriers for combination therapies

Particle engineering for co-delivery of drugs has the potential to combine multiple drugs with different pharmaceutical mechanisms within the same carrier, increasing the therapeutic efficiency while improving patient compliance. This work proposes a novel approach for producing polymer-polymer core-shell microparticles by multi-step processing of emulsion and spray drying. The particle core was obtained by an oil-in-water emulsion of poly(ε-caprolactone) (PCL) loaded with curcumin (CM), followed by the resuspension in poly(vinyl alcohol) (PVA) containing ciprofloxacin (CPx) forming the shell layer by spray-drying. The obtained core-shell particles showed an average size of 3.8 ± 1.2 μm, which is a suitable size for inhalation therapies. The spatial distribution of the drugs was studied using synchrotron-based macro attenuated total reflection Fourier transform infrared (macro ATR-FTIR) microspectroscopy to map the chemical distribution of the components within the particles and supported the presence of CM and CPx in the core and shell layers, respectively. The formation of the core-shell structure was further supported by the differences in the release profile of CM from these particles, when compared to the release profile observed for the single particle structure (PCL-CM). Both empty and drug-loaded carriers (up to 100 μg.mL^-1) showed no cytotoxic effects on A549 cells while exhibiting the antibacterial activity of CPx against Gram-positive and Gram-negative bacteria. These polymer core-shell microparticles provide a promising route for the combination and sequential drug release therapies, with the potential to be used in inhalation therapies.

Multimodal image-guided folic acid targeted Ag-based quantum dots for the combination of selective methotrexate delivery and photothermal therapy

Multifunctional quantum dots (QDs) with photothermal therapy (PTT) potential loaded with an anticancer drug and labelled with a targeting agent can be highly effective nano-agents for tumour specific, image-guided PTT/chemo combination therapy of cancer. Ag-chalcogenides are promising QDs with good biocompatibility. Ag₂S QDs are popular theranostic agents for imaging in near-infrared with PTT potential. However, theranostic applications of AgInS2 QDs emitting in the visible region and its PTT potential need to be explored. Here, we first present a simple synthesis of small, glutathione (GSH) coated AgInS₂ QDs with peak emission at 634 nm, 21% quantum yield, and excellent long-term stability without an inorganic shell. Ag2S-GSH QDs emitting in the near-infrared region (peak emission = 822 nm) were also produced. Both QDs were tagged with folic acid (FA) and conjugated with methotrexate (MTX). About 3-fold higher internalization of FA-tagged QDs by folate-receptor (FR) overexpressing HeLa cells than HT29 and A549 cells was observed. Delivery of MTX by QD-FA-MTX reduced the IC50 of the drug from 10 μg/mL to 2.5-5 μg/mL. MTX release was triggered at acidic pH, which was further enhanced with local temperature increase created by laser irradiation. Irradiation of AgInS₂-GSH QDs at 640 nm (300 mW) for 10 min, caused about 10 °C temperature increase but did not cause any thermal ablation of cells. On the other hand, Ag₂S-GSH-FA based PTT effectively and selectively killed HeLa cells with 10 min 808 nm laser irradiation via mostly necrosis with an IC₅₀ of 5 μg Ag/mL. Under the same conditions, IC₅₀ of MTX was reduced to 0.21 μg/mL if Ag₂S-GSH-FA.

A novel multi-stimuli-responsive theranostic nanomedicine based on Fe3O4@Au nanoparticles against cancer

A novel multi-stimuli-responsive theranostic nanomedicine was designed and fabricated by the conjugation of a thiol end-capped poly(N-isopropylacrylamide-block-acrylic acid) (HS-PNIPAAm-b-PAA) onto Fe₃O₄@Au nanoparticles (NPs) followed by physical loading of doxorubicin hydrochloride (Dox) as a general anticancer drug. For this purpose, Fe₃O₄@Au NPs were fabricated through small Au nanolayer grown on larger magnetic NPs. A HS-PNIPAAm-b-PAA was synthesized through an atom transfer radical polymerization (ATRP) approach, and then conjugated with as-synthesized Fe₃O₄@Au NPs by Au-S bonding. The Dox loading capacity of the synthesized Fe₃O₄@Au/Polymer theranostic NPs was calculated to be 81%. The theranostic nanomedicine exhibited excellent in vitro drug release behavior under pH and thermal stimuli. The anticancer activity evaluation using MTT assay (against MCF7 cells) revealed that the fabricated Fe₃O₄@Au/Polymer has high potential as theranostic nanomedicine for cancer therapy of solid tumors. This nanosystem can also applied in photothermal therapy, hyperthermia therapy, and their combination with chemotherapy due to presence of gold and Fe₃O₄ nanomaterials in its structure.

Functions and applications of metallic and metallic oxide nanoparticles in orthopedic implants and scaffolds

Bone defects and diseases are devastating, and can lead to severe functional deficits or even permanent disability. Nevertheless, orthopedic implants and scaffolds can facilitate the growth of incipient bone and help us to treat bone defects and diseases. Currently, a wide range of biomaterials with distinct biocompatibility, biodegradability, porosity, and mechanical strength is used in bone-related research. However, most orthopedic implants and scaffolds have certain limitations and diverse complications, such as limited corrosion resistance, low cell proliferation, and bacterial adhesion. With recent advancements in materials science and nanotechnology, metallic and metallic oxide nanoparticles have become the subject of significant interest as they offer an ample variety of options to resolve the existing problems in the orthopedic industry. More importantly, these nanoparticles possess unique physicochemical and mechanical properties not found in conventional materials, and can be incorporated into orthopedic implants and scaffolds to enhance their antimicrobial ability, bioactive molecular delivery, mechanical strength, osteointegration, and cell labeling and imaging. However, many metallic and metallic oxide nanoparticles can also be toxic to nearby cells and tissues. This review article will discuss the applications and functions of metallic and metallic oxide nanoparticles in orthopedic implants and bone tissue engineering.

Preparation and evaluation of long circulating erythrocyte membrane-cloaked anti-cancer drug delivery system

Recently, biomimetic hybrid drug delivery systems, especially erythrocyte membrane-based drug delivery systems, have been utilized to achieve high bioavailability, and biocompatibility, in the meantime, to reduce immunogenicity and effectively evade phagocytosis of the host immune system. Here, we developed a novel drug delivery system of red blood cell membrane-derived vesicles (RDVs) cloaked poly (acrylic acid)-cystamine hydrochloride-D-α-tocopherol succinate (PAAssVES) nanoparticles. The PAAssVES nanoparticles were prepared via emulsification and solvent volatilization method, followed by loading of the model anti-cancer drug, sorafenib (SFN). Then RDVs and SFN-PAAssVES nanoparticles were uniformly mixed and co-extruded through polycarbonate membrane. The prepared RDV-coated nanoparticles (RDV-NPs) had good stability, with a zeta potential of - 10.7 mV and particle size of 113.5 nm. MTT assay was used to analyze the effects of RDV-NPs on cell viability in two kinds of gastric cancer cell lines BGC-823 and MKN-45. The results showed that RDV-NPs significantly decreased cell viability. In vitro drug release investigation showed that RDV-NPs had good sustained release properties and the cumulative release was 71.5% in 72 h. In pharmacokinetic studies, SD male rats' intravenous injection with RDV-NP solution showed a more smooth plasma concentration-time profile. Compared with free SFN treatment and SFN-PAAssVES group, RDV-NPs enhanced the AUC by about 4.1-fold and 2.0-fold. The MRT and t_1/2 of RDV-NPs were increased to 23.670 ± 2.347 h and 24.450 ± 2.652 h. Our study demonstrated the promise of using RDV-NPs as a long circulating anti-cancer drug delivery system. Graphical abstract.

Synthesis and physicochemical properties of dual-responsive acrylic acid/butyl acrylate cross-linked nanogel systems

HYPOTHESIS

A cross-linked amphiphilic nanogel containing a high mole% of hydrophilic pH-responsive moiety can provide enhanced functionality regarding stimuli-responsiveness, water-dispersibility, hydrophobic substance loading, and structural stability under harsh environmental conditions. These nanogels could be synthesized using a one-pot procedure for large-scale applications. Moreover, the interplay of various interaction forces in these colloidal systems is being investigated.

EXPERIMENTS

Model nanogels consisting of acrylic acid-butyl acrylate-ethylene glycoldimethacrylate were synthesized using an emulsion copolymerization via a seeded semi-batch process under an acidic condition. The structures were assessed by Fourier transform infrared spectroscopy and potentiometric-conductometric titrations. Zeta potential, field-emission scanning electron microscopy, and transmission electron microscopy were used to evaluate the dispersion stability, size distribution, and structural distribution, respectively. Their stimuli-responsive behavior was studied by combining static and dynamic light scattering and titration analyses.

FINDINGS

Monodisperse nanospheres of approximately 150 nm were successfully prepared by implementing a one-pot practical pathway. These nanogels displayed a dual thermo- and pH-responsive behavior, reflecting the high efficiency of physical cross-linking make it ideal for drug delivery and oil industry applications. Moreover, a novel symmetric pH-activated morphology transformation behavior was revealed. Accordingly, a compositional distribution was proposed and assessed by exploring the polymerization process.