Facile synthesis of nitrogen-enriched nanoporous carbon materials for high performance supercapacitors

Promoting the suitability of graphitic carbon nitride and metal oxide nanoparticles: A review of sulfonamides photocatalytic degradation

The widespread consumption of pharmaceutical drugs and their incomplete breakdown in organisms has led to their extensive presence in aquatic environments. The indiscriminate use of antibiotics, such as sulfonamides, has contributed to the development of drug-resistant bacteria and the persistent pollution of water bodies, posing a threat to human health and the safety of the environment. Thus, it is paramount to explore remediation technologies aimed at decomposing and complete elimination of the toxic contaminants from pharmaceutical wastewater. The review aims to explore the utilization of metal-oxide nanoparticles (MONPs) and graphitic carbon nitrides (g-C3N4) in photocatalytic degradation of sulfonamides from wastewater. Recent advances in oxidation techniques such as photocatalytic degradation are being exploited in the elimination of the sulfonamides from wastewater. MONP and g-C3N4 are commonly evolved nano substances with intrinsic properties. They possessed nano-scale structure, considerable porosity semi-conducting properties, responsible for decomposing wide range of water pollutants. They are widely applied for photocatalytic degradation of organic and inorganic substances which continue to evolve due to the low-cost, efficiency, less toxicity, and more environmentally friendliness of the materials. The review focuses on the current advances in the application of these materials, their efficiencies, degradation mechanisms, and recyclability in the context of sulfonamides photocatalytic degradation.

Novel metal-lignin assembly strategy for one-pot fabrication of lignin-derived heteroatom-doped hierarchically porous carbon and its application in high-performance supercapacitor

The conversion of renewable lignin with low-cost and high carbon content properties into porous carbon materials for supercapacitor applications has caught considerable interest. Herein, two dimensional lignin-derived carbon nanosheets (N-LHPC) with hierarchically porous structures were facilely synthesized via a novel metal-lignin assembly strategy and their performances for supercapacitor applications were investigated. During the carbonization process, the uniformly distributed Zn facilitates the coordinating development of micropores structure and the generated MgO embedded in the carbon matrix acts as a template to produce mesoporous structure after acid washing. Moreover, the melamine addition promotes the development of mesopores by formation of lamellae structure and realizes the N doping in the carbon materials. Therefore, the obtained N-LHPC presents an excellent specific capacitance of 235.75 F/g at 0.5 A/g owing to its hierarchical pore structure as well as the N/O functional groups. Moreover, at the power density of 450 W/kg, the N-LHPC achieves a maximum energy density of 14.75 Wh/kg, showing great application potential in energy storage. The metal-lignin assembly strategy followed by N-doping proposed in this paper provides N-LHPC materials with hierarchical nanostructure, good electron/ion transfer properties, and abundant pseudocapacitive active species, which improve the capacitance performances of the N-LHPC.

Dual-Silica Template-Mediated Synthesis of Nitrogen-Doped Mesoporous Carbon Nanotubes for Supercapacitor Applications

1D carbon nanotubes have been widely applied in many fields, such as catalysis, sensing and energy storage. However, the long tunnel-like pores and relatively low specific surface area of carbon nanotubes often restrict their performance in certain applications. Herein, a dual-silica template-mediated method to prepare nitrogen-doped mesoporous carbon nanotubes (NMCTs) through co-depositing polydopamine (both carbon and nitrogen precursors) and silica nanoparticles (the porogen for mesopore formation) on a silica nanowire template is proposed. The obtained NMCTs have a hierarchical pore structure of large open mesopores and tubular macropores, a high specific surface area (1037 m² g^-1 ), and homogeneous nitrogen doping. The NMCT-45 (prepared at an interval time of 45 min) shows excellent performance in supercapacitor applications with a high capacitance (373.6 F g^-1 at 1.0 A g-¹ ), excellent rate capability, high energy density (11.6 W h kg^-1 at a power density of 313 W kg^-1 ), and outstanding cycling stability (98.2% capacity retention after 10 000 cycles at 10 A g^-1 ). Owing to the unique tubular morphology, hierarchical porosity and homogeneous N-doping, the NMCT also has tremendous potential in electrochemical catalysis and sensing applications.

Free-Standing N-Doped Porous Carbon Fiber Membrane Derived From Zn-MOF-74: Synthesis and Application as Anode for Sodium-Ion Battery With an Excellent Performance

It is important to develop new energy storage and conversion technology to mitigate the energy crisis for the sustainable development of human society. In this study, free-standing porous nitrogen-doped carbon fiber (PN-CF) membranes were obtained from the pyrolysis of Zn-MOF-74/polyacrylonitrile (PAN) composite fibers, which were fabricated in situ by an electrospinning technology. The resulting free-standing fibers can be cut into membrane disks and directly used as an anode electrode without the addition of any binder or additive. The PN-CFs showed great reversible capacities of 210 mAh g-1 at a current density of 0.05 A g-1 and excellent cyclic stability of 170.5 mAh g-1 at a current density of 0.2 A g-1 after 600 cycles in sodium ion batteries (SIBs). The improved electrochemical performance of PN-CFs can be attributed to the rich porous structure derived by the incorporation of Zn-MOF-74 and nitrogen doping to promote sodium ion transportation.

Corrigendum to "Carbonized cotton fiber supported flexible organic lithium ion battery cathodes" [J. Colloid Interface Sci. 572 (2020) 1-8]

Carbonized cotton fibers (CCFs) were prepared by the carbonization of commercial cottons at 700, 800 and 900 °C. The following characterizations indicated that the properties of the obtained CCFs could be effectively tuned by the carbonization temperatures. Containing both high conductivity and high aspect ratio, the CCFs could be used as the conductive agents for the construction of the integrated organic cathodes in lithium ion batteries (LIBs). With the optimized ratio of CCF from 900 °C, the organic LIB cathodes showed a high specific capacity of 135 mA h g^-1 at a current density of 0.05 A g^-1 and an impressive cyclizing stability by keeping 90.5% of the highest capacity value after 500 cycles at 0.5 A g^-1. The moderate mechanical stability of the CCF supported organic cathode enabled the further fabrication of flexible LIBs, which manifested stable performances at various bent states, confirming the potentials of CCFs in flexible energy storage devices.

One-pot synthesis of nitrogen-doped carbons with hierarchically micro- and mesoporous structures for supercapacitors and CO2 capture

Nitrogen-doped mesoporous carbons are considered promising candidates for supercapacitors and CO₂ sorbents.

Sustainable biomass-based hierarchical porous carbon for energy storage: A novel route to maintain electrochemically attractive natural structure of precursor

The development of sustainable and renewable energy storage devices with low cost and environment friendly features is an extremely urgent issue that needs to be solved. Herein, low-cost and sustainable biomass chitin, possessing natural fibrous, O/N-enriched and porous structure, was employed as a porous carbon (PC) precursor. However, a huge challenge in PC preparation is to maintain the natural electrochemically attractive structure of chitin while obtaining highly porous structure. In this study, by utilizing the molten protecting effect and micropore-creating ability of CuCl₂ 2H₂O, the obtained PCs maintain the natural structure, achieve high yield (46%), and simultaneously develop hierarchical pores with a specific surface area range of 1635-2381 m² g^-1, a tunable micropore volume ratio range of 63.5-96.8%, and high surface O/N contents (N: 3.1-9.0 wt% and O: 10.5-12.8 wt%). Benefiting from these excellent properties, optimized PC achieves a high specific capacitance of 286 F g^-1 at 0.5 A g^-1 and a remarkably high rate capability of 88% at 10 A g^-1; moreover, it even exhibits a rate capability of 80% at an ultrahigh current density of 50 A g^-1. The optimized PC-based supercapacitor assembled in Na₂SO₄ electrolyte shows a high energy density of 15.41 W h kg^-1 at 0.19 kW kg^-1 and achieves 76% energy density retention when the power density increased tenfold. Thus, this study presents a new way to fully utilize biomass, especially with electrochemically attractive natural structure, for developing advanced energy storage devices.

Carbonized cotton fiber supported flexible organic lithium ion battery cathodes

Carbonized cotton fibers (CCFs) were prepared by the carbonization of commercial cottons at 700, 800 and 900 °C. The following characterizations indicated that the properties of the obtained CCFs could be effectively tuned by the carbonization temperatures. Containing both high conductivity and high aspect ratio, the CCFs could be used as the conductive agents for the construction of the integrated organic cathodes in lithium ion batteries (LIBs). With the optimized ratio of CCF from 900 °C, the organic LIB cathodes showed a high specific capacity of 135 mA h g^-1 at a current density of 0.05 A g^-1 and an impressive cyclizing stability by keeping 90.5% of the highest capacity value after 500 cycles at 0.5 A g^-1. The good mechanical stability of the CCF supported organic cathode enabled the further fabrication of flexible LIBs, which manifested stable performances at various bent states, confirming the potentials of CCFs in flexible energy storage devices.

Waste biomass valorization through production of xylose-based porous carbon microspheres for supercapacitor applications

Sequential potassium hydroxide (KOH)-phosphoric acid (H3PO4) activation was applied to biomass waste to fabricate activated carbon microspheres (mCMs) with a controllable porous structure. Carbon microspheres (CMs) were first synthesized from xylose using a bottom-up approach of hydrothermal carbonization. Sequential KOH and H₃PO₄ activation was applied to the CMs in a KOH-carbon solid reaction. This created pores, which were further enlarged by adsorption of H₃PO₄. The KOH:carbon (C) and H₃PO₄:C molar ratios, and the H₃PO₄ heating rate and activation time, were varied to investigate the effect on average pore size and pore distribution. A uniform porous structure was formed without destruction of the spherical shape, and an almost 700-fold increase in surface area was obtained over the non-activated CMs. Following activation with H₃PO₄, phosphorous groups were found to be present at the surface of the carbon microspheres. The mCM was tested as a supercapacitor electrode and was shown to have a maximum specific capacitance of up to 277F g^-1. A Ragone plot showed the maximum power density to be 173.88 W Kg^-1. This increased specific capacitance was attributed to the increase in surface area and the presence of phosphorous-containing acid sites on the material surface.