Removal of toxic pollutants from aqueous media using poly (vinyl imidazole) crosslinked chitosan synthesised through microwave assisted technique

Recent advances of copolymer for water treatment

Increasing water pollution due to anthropogenic activities prompts the quest for an effective water treatment method. Polymeric materials have gained attention as adsorbents for water purification. Membranes are majorly made from homopolymeric materials. However, recent studies have focused on using copolymeric materials for improved performance. In this review, the basics of copolymerization including various types of copolymers, synthetic approaches, and their applications in various water pollutants removal are discussed in detail. Advances in water treatment technology using copolymeric materials as adsorbent/membranes in the last 4 years are covered with insights into the future outlook and areas of improvement in terms of copolymer composites for water treatment. Studies from the literature did not only reveal effectiveness of copolymer as a flocculant/antifouling materials and in removal of selective toxic metals, oil, and microbes but also demonstrated recyclability of the copolymer sorbents/membrane. Full exploration of unique copolymer textural and structural properties could lead to great advancement in water treatment process. PRACTITIONER POINTS: The copolymer types and synthetic methods are discussed. Application of copolymer as adsorbent/membranes for water treatment is presented. Recent advances show good pollutants removal for toxic metals, oil, and organics. Copolymer composites have great potential as adsorbent/membranes for future use in water treatment processes.

Harnessing the power of polyethyleneimine in modifying chitosan surfaces for efficient anion dyes and hexavalent chromium removal

In this investigation, synthesis of a surface-functionalized chitosan known as amino-rich chitosan (ARCH) was achieved by successful modification of chitosan by polyethyleneimine (PEI). The synthesized ARCH was characterized by a specific surface area of 8.35 m2 g-1 and a microporous structure, with pore sizes predominantly under 25 nm. The Zeta potential of ARCH maintained a strong positive charge across a wide pH range of 3-11. These characteristics contribute to its high adsorption efficiency in aqueous solutions, demonstrated by its application in removing various anionic dyes, including erioglaucine disodium salt (EDS), methyl orange (MO), amaranth (ART), tartrazine (TTZ), and hexavalent chromium ions (Cr(VI)). The adsorption capacities (Qe) for these contaminants were measured at 1301.15 mg g-1 for EDS, 1025.45 mg g-1 for MO, 940.72 mg g-1 for ART, 732.96 mg g-1 for TTZ, and 350.15 mg g-1 for Cr(VI). A significant observation was the rapid attainment of adsorption equilibrium, occurring within 10 min for ARCH. The adsorption behavior was well-described by the Pseudo-second-order and Langmuir models. Thermodynamic studies indicated that the adsorption process is spontaneous and endothermic in nature. Additionally, an increase in temperature was found to enhance the adsorption capacity of ARCH. The material demonstrated robust stability and selective adsorption capabilities in varied conditions, including different organic compounds, pH environments, sodium salt presence, and in the face of interfering ions. After five cycles of adsorption, ARCH maintained about 60% of its initial adsorption capacity. Due to its efficient adsorption performance, simple synthesis process, low biological toxicity, and cost-effectiveness, ARCH is a promising candidate for future water treatment technologies.

A novel chitosan-alginate@Fe/Mn mixed oxide nanocomposite for highly efficient removal of Cr (VI) from wastewater: Experiment and adsorption mechanism

In this study, the synthesis and experimental theoretical evaluation of a new chitosan/alginate/hydrozyapatite nanocomposite doped with Mn2 and Fe2O3 for Cr removal was reported. The physicochemical properties of the obtained materials were analyzed using the following methods: SEM-EDX, XRD, FTIR, XPS, pH drift measurements, and thermal analysis. The adsorption properties were estimated based on equilibrium and adsorption kinetics measurements. The Langmuir, Freundlich and Temkin isotherms were applied to analyze the equilibrium data. The thermodynamic analysis of adsorption isotherms was performed. A number of equations and kinetic models were used to describe the adsorption rate data, including pseudo-first (PFOE) and pseudo-second (PSOE) order kinetic equations. The obtained test results show that the synthesized biomaterial, compared to pure chitosan, is characterized by greater resistance to high temperatures. Moreover, this biomaterial had excellent adsorption properties. For the adsorption of Cr (VI), the equilibrium state was reached after 120 min, and the sorption capacity was 455.9 mg/g. In addition, DFT calculations and NCI analyses were performed to get more light on the adsorption mechanism of Cr (VI) on the prepared biocomposite.

Glutaraldehyde and terephthaldehyde-crosslinked chitosan for cationic and anionic dyes removal from aqueous solutions: Experimental, DFT, kinetic and thermodynamic studies

Novel chitosan polymers were synthesized using two cross-linkers, Glutaraldehyde and Terephthaldehyde, to enhance stability and efficiency. Characterization techniques (XRD, FTIR, FE-SEM, TGA, DTG, BJH, and BET) confirmed successful synthesis. These polymers were employed as adsorbents for removing Malachite Green (MG) and Congo Red (CR) dyes from water. Batch experiments and DFT calculations investigated the adsorption process, thermodynamics, and kinetics. Results showed the CSGT-III polymer achieved the highest removal efficiency. For initial dye concentrations ([CR]o = 50 mg/L, [MG]o = 20 mg/L) and adsorbent doses (0.8 g/L for CR, 0.4 g/L for MG), removal efficiencies were 96.99 % for CR and 99.07 % for MG. Thermodynamic analysis confirmed the spontaneous nature of adsorption, and the process was endothermic for both dyes. The Langmuir model fitted adsorption isotherms well, indicating a homogeneous surface. Kinetic analysis revealed a pseudo-second-order model for both dyes.

Reusable Sugar-Based Gelator for Marine Oil-Spill Recovery and Waste Water Treatment

In this work, the gelation ability of a series of novel pyridine-based glucose tailored gelators (DPHAEN, DPHABN, and DPHAHN) with a flexible alkyl chain has been examined in binary solvent mixtures using a number of techniques, for example, UV spectroscopy, FT-IR spectroscopy, NMR spectroscopy, rheology measurement, SEM, XRD, and computational study. Proposed herein is an environment-friendly method to realize toxic dye separation and oil/water separation. It has been found that gels in a selective binary solvent mixture are efficient reusable absorbers of toxic dye molecules. A new gravitational force-driven, simple one-step, toxic dye removal and oil-water separation method is presented for sustainable filtration of waste water and simultaneous collection of oil. The gel column also showed high stability and reusability over repeated use and can be easily scaled for efficient clean-up of a large number of toxic dyes and oil spills present in water. Studies also exposed that the gel column can simultaneously separate dye molecules and mineral oils from water. This simple, green, and efficient method overcomes a nontrivial hurdle for environmentally safe separation of toxic dyes as well as oil/water mixtures and offers insights into the design of advanced materials for practical oil/water separation.

Chitosan based titanium and iron oxide hybrid bio-polymeric nanocomposites as potential corrosion inhibitor for mild steel in acidic medium

Biopolymer chitosan (CS), chitosan grafted acrylamide based titanium dioxide (CS-g-PAM/TiO₂) and magnetite (CS-g-PAM/Fe₃O₄) hybrid nanocomposites have been synthesized through free radical graft co-polymerization and successfully validated as corrosion inhibitors for mild steel in 15 % HCl solution. The synthesized compounds have been characterized through FTIR, APC, XRD and TEM. The thermal stability of the nanocomposites was established by TGA. The anticorrosive performance was determined through gravimetric measurements and by electrochemical study. According to EIS technique it was observed that CS-g-PAM/TiO₂ and CS-g-PAM/Fe₃O₄ showed maximum 97.19 % and 95.49 % efficiency respectively. Langmuir adsorption isotherm is obeyed in each case. The activation and adsorption parameters have been determined from isotherm study. FESEM and AFM confirmed better adsorption layer formed by composites over mild steel surface. The elemental composition of the metal samples was proved by the XPS investigation. DFT and ANOVA test further corroborates the experimental results.

Nano-Scaled Materials and Polymer Integration in Biosensing Tools

The evolution of biosensors and diagnostic devices has been thriving in its ability to provide reliable tools with simplified operation steps. These evolutions have paved the way for further advances in sensing materials, strategies, and device structures. Polymeric composite materials can be formed into nanostructures and networks of different types, including hydrogels, vesicles, dendrimers, molecularly imprinted polymers (MIP), etc. Due to their biocompatibility, flexibility, and low prices, they are promising tools for future lab-on-chip devices as both manufacturing materials and immobilization surfaces. Polymers can also allow the construction of scaffold materials and 3D structures that further elevate the sensing capabilities of traditional 2D biosensors. This review discusses the latest developments in nano-scaled materials and synthesis techniques for polymer structures and their integration into sensing applications by highlighting their various structural advantages in producing highly sensitive tools that rival bench-top instruments. The developments in material design open a new door for decentralized medicine and public protection that allows effective onsite and point-of-care diagnostics.

Hydrogels and Hydrogel Nanocomposites: Enhancing Healthcare through Human and Environmental Treatment

Humans are constantly exposed to exogenous chemicals throughout their life, which can lead to a multitude of negative health impacts. Advanced materials can play a key role in preventing or mitigating these impacts through a wide variety of applications. The tunable properties of hydrogels and hydrogel nanocomposites (e.g., swelling behavior, biocompatibility, stimuli responsiveness, functionality, etc.) have deemed them ideal platforms for removal of environmental contaminants, detoxification, and reduction of body burden from exogenous chemical exposures for prevention of disease initiation, and advanced treatment of chronic diseases, including cancer, diabetes, and cardiovascular disease. In this review, three main junctures where the use of hydrogel and hydrogel nanocomposite materials can intervene to positively impact human health are highlighted: 1) preventing exposures to environmental contaminants, 2) prophylactic treatments to prevent chronic disease initiation, and 3) treating chronic diseases after they have developed.

Poly(N-vinyl imidazole) Cross-Linked β-Cyclodextrin Hydrogel for Rapid Hemostasis in Severe Renal Arterial Hemorrhagic Model

A unique facile process has been adopted for fast assembly of a poly(N-vinyl imidazole) cross-linked β-cyclodextrin hydrogel through microwave-assisted free radical polymerization, using N,N'-methylenebis(acrylamide) cross-linker. The copolymer possesses positive surface charge, one of the characteristic properties of an ideal hemostatic hydrogel. The functionalized imidazole-based hydrogel demonstrates rapid, superior blood coagulation kinetics under in vitro and in vivo conditions. On application to a major renal arterial hemorrhagic model, this hydrogel shows better blood clotting kinetics, leading to complete hemostasis in as few as ∼144 ± 7 s. Additionally, 350 μL of whole blood was clotted instantly, in ∼35 s, and therefore, reinforcing its hemostatic potential. The hydrogel demonstrates excellent biocompatibility, when seeded with human dermal fibroblast cells, retaining the native property of its predecessor. In addition, the hydrogel presents excellent hemocompatibility when tested with whole blood with the highest hemolytic ratio of 1.07 ± 0.05%. Moreover, it also demonstrates potential as a carrier for sustained release of an anesthetic drug, lidocaine hydrochloride monohydrate (∼83% in 24 h). The rapid hemostatic behavior of the hydrogel is coupled with its cytocompatibility and hemocompatibilty properties along with controlled drug release characteristics. These behaviors evidently demonstrate it to be an excellent alternative for a superior hemostatic material for severe hemorrhagic conditions.

Chitosan modifications for adsorption of pollutants - A review

In recent times, research interest into the development of biodegradable, cost-effective and environmental friendly adsorbents with favourable properties for adsorption of pollutants is a challenge. Modification of chitosan via different physical and chemical methods have gained attention as a promising approach for removing organic (such as dyes and pharmaceuticals) and inorganic (such as metal/metal ions) pollutants from aqueous medium. In this regard, researchers have reported grafting and cross-linking approach among others as a potentially useful method for chitosan's modification for improved adsorption efficiency with respect to pollutant uptake. This article reviews the trend in chitosan modification, with regards to the summary of some recently published works on modification of chitosan and their adsorption application in pollutants (metal ion, dyes and pharmaceuticals) removal from aqueous medium. The review uniquely highlights some common cross-linkers and grafting procedures for chitosan modification, their influence on structure and adsorption capacity of modified-chitosan with respect to pollutants removal. Findings revealed that the performance of modified chitosan for adsorption of pollutants depends largely on the modification method adopted, materials used for the modification and adsorption experimental conditions. Cross-linking is commonly utilized for improving the chemical and mechanical stabilities of chitosan but usually decreases adsorption capacity of chitosan/modified-chitosan for adsorption of pollutants. However, literature survey revealed that adsorption capacity of cross-linked chitosan based materials have been enhanced in recently published works either by grafting, incorporation of solid adsorbents (e.g metals, clays and activated carbon) or combination of both prior to cross-linking.

Terephthalaldehyde as a good crosslinking agent in crosslinked chitosan hydrogel for the selective removal of anionic dyes

This work reports the selectivity and good adsorption performance for the removal of anionic dyes using an ultrasonic-synthesized terephthalaldehyde crosslinked chitosan hydrogel.

Crosslinked chitosan embedded TiO2 NPs and carbon dots-based nanocomposite: An excellent photocatalyst under sunlight irradiation

Herein, a new hybrid nanocomposite, comprising of titania nanoparticles (TiO₂ NPs) and carbon dots (CDs) deposited polyvinyl imidazole crosslinked chitosan [cl-Ch-p(VI)/TiO₂NPs-CDs] has been developed. The nanocomposite has been synthesised by in-situ deposition of TiO₂ NPs and CDs onto the surface of the copolymer under microwave irradiation. To the best of our knowledge, this in-situ approach has effectively been applied for the first time to fabricate green fluorescent CDs from sugar cane juice at moderate temperature (75 °C) under microwave irradiation. The developed nanocomposite has been characterized using UV-Vis spectroscopy, ¹³C NMR, XRD, HR-TEM, STEM and XPS analyses. The results suggest that the successful deposition of TiO₂ NPs and CDs onto the surface of crosslinked chitosan is achieved. The experimental studies indicate that the NPs/CDs-impregnated nanocomposite allows efficient photocatalytic degradation of toxic organic compounds (~98.6% degradation of 2,4-dicholorophenol, ~95.8% degradation of Reactive Blue 4, ~98.2% degradation of Reactive Red 15) in the presence of sunlight. Finally, LC-MS analysis of the resultant degraded materials reveals the formation of organic molecules with lower molecular mass.

Experimental and finite element method studies for femtomolar cobalt ion detection using a DHI modified nanochannel

In this work, a sensing nanochannel based on a N-[3-(triethoxysilyl)propyl]-4,5-dihydroimidazole (DHI) modified nanopipette was prepared and characterized for the ultrasensitive detection of cobalt ions (Co²⁺) in aqueous solutions.