Low-cost heterogeneous dual-carbon shells coated silicon monoxide porous composites as anodes for high-performance lithium-ion batteries

Honeycomb-like 3D ordered macroporous SiOx/C nanoarchitectures with carbon coating for high-performance lithium storage

SiOx anodes are garnering significant interest in lithium-ion batteries (LIBs) due to theirs low voltage plateau and high capacity. However, critical drawbacks, including high expansion rate and low electronic conductivity, severely limit their practical applications. While 0D, 1D, and 2D scale nanostructures have been proven to mitigate these issues, these materials tend to accumulate after prolonged cycling, leading to adverse effects on the mass transfer processes within the electrode. Herein, we have developed a honeycomb-like SiOx/C nanoarchitecture with carbon coating based on a 3D ordered macroporous (3DOM) structure. The 3D interconnected pore windows facilitate the diffusion and transport of lithium ions (Li+) in the electrolyte, and the extremely thin walls (<15 nm) provide a shorter transport path for Li+ in the solid. The carbon cladding buffers volume expansion and enhances electronic conductivity. The as-prepared anode demonstrates a high reversible capacity of 1068 mAh/g and an initial coulombic efficiency of 70.7 %. It maintains a capacity of 644 mAh/g (capacity retention of 84.63 %) even at a high current of 1.0 A/g after 700 cycles. The unique honeycomb-like structure offers enormous insights into the study of energy storage in 3D materials.

Facile and scalable synthesis of α-Fe2O3/γ-Fe2O3/Fe/C nanocomposite as advanced anode materials for lithium/sodium ion batteries

To develop low-cost advanced anode materials for lithium/sodium ion batteries, the chemical reaction equilibrium of Fe(NO₃)₃ and glucose in hot aqueous solution is creatively used to fabricate a new α-Fe₂O₃/γ-Fe₂O₃/Fe/C nanocomposite with the primary particle sizes concentrated at 25-80 nm. As anodes for lithium ion batteries, it exhibits a discharge capacity of ∼878 mAh g^-1 after 200 cycles at a current density of 200 mA g^-1. Moreover, even after 1000 cycles at a current density of 3200 mA g^-1, the discharge capacity is as high as ∼532 mAh g^-1, with a capacity retention of over than 100% against that of the second cycle. As anodes for sodium ion batteries, the nanocomposite displays a stable discharge capacity of ∼400 mAh g^-1 at a current density of 100 mA g^-1 and no obvious capacity degradation happens after 200 cycles. During cycling, the α-Fe₂O₃/γ-Fe₂O₃/Fe/C nanocomposite electrodes shows high structural stability and relatively faster reaction kinetics, which should be responsible for its excellent electrochemical performance. This work provides a facile and scalable route to synthesize high-performance and low-cost Fe₂O₃-based nanocomposite for the secondary batteries.