Self-standing hollow porous AuPt nanospheres and their enhanced electrocatalytic performance

Ultra-Sensitive Simultaneous Detection of Dopamine and Acetaminophen over Hollow Porous AuAg Alloy Nanospheres

Hollow porous AuAg nanospheres (AuAg HPNSs) were obtained through a simple solvothermal synthesis, complemented by a dealloying strategy. The hollow interior, open pore voids, and integral interconnected skeleton shell in AuAg HPNSs are beneficial for providing sufficient electrolyte diffusion and contacts, abundant active sites, and efficient electron transport. This specific structure and the favorable alloy synergism contribute to the superior electrocatalytic activity toward dopamine (DA) and acetaminophen (AC). AuAg HPNSs show high sensitivity, good selectivity, excellent sensing durability, and outstanding repeatability for amperometric assays of AC and DA. In particular, the AuAg-based sensors achieve effective ultrasensitive simultaneous analyses of AC and DA, exhibiting the characteristics of the wide linear range and low detection limit. With their prominent electrocatalytic activity and simple preparation methods, AuAg HPNSs present broad application prospects for constructing a highly responsive electrochemical sensing system.

Poly (ionic liquid) cross-linked hydrogel encapsulated with AuPt nanozymes for the smartphone-based colorimetric detection of zearalenone

A poly (ionic liquid) enhanced poly(acrylamide-acrylic acid) (PIL-PAM/AA) hydrogel-based colorimetric sensor was designed to detect zearalenone (ZEN). Different AuxPty nanoparticles were synthesized via the on-pot method. Through the kinetic analysis and the theoretical calculation, Au0.4Pt0.6 possessed the relatively low energy barriers to adsorb and decompose H2O2 so that it exhibited relatively better catalytic activity (Km = 2.02 × 10-3, Vmax = 6.14 × 10-7). AuPt nanoparticles were encapsulated into PIL-PAM/AA hydrogel via the interaction between aptamer and cDNA. In the presence of ZEN, the embedded AuPt nanoparticles were released to complete the catalytic reaction. Coupled with the smartphone application, the established method provided the linear range of 1-250 ng mL-1, with a detection limit of 0.6979 ng mL-1 for ZEN. Meanwhile, it also possessed excellent selectivity and good anti-interference performance. In wheat and corn samples, spiked recoveries were ranging from 75% to 113.30%.

MXene-incorporated C60NPs and Au@Pt with dual-electric signal outputs for accurate detection of Mycobacterium tuberculosis ESAT-6 antigen

Rapid and effective detection of Mycobacterium tuberculosis (MTB) is the crux of minimizing tuberculosis (TB) spread. Consequently, a new electrochemical aptasensor based on dual-signal output for ultrasensitive detection of MTB early secreted antigenic target 6 (ESAT-6) antigen was developed. Especially, a new nanocomposite MXene/C60NPs/Au@Pt was synthesized for signal generation and amplification. In this biosensing architecture, dual independent signal outputs were achieved by coupling the electrochemical redox activity of fullerene nanoparticles (C60NPs) with the effective electrocatalytic activity of Au@Pt nanoparticles. MXene possesses a large specific surface area, allowing densely loaded of these two electroactive materials, further improved sensing capability. In addition, specific ESAT-6 antigen binding aptamers were attached to Au@Pt to create the tracer label. With a typical sandwich format along with the introduction of the gold nanoparticle-loaded molybdenum disulfide (MoS2-Au) as the sensing interface, the limit of detection (LOD) of the proposed aptasensor was 2.88 fg mL-1 (DPV measurement) and 13.50 fg mL-1 (IT measurement), respectively, with a broad linear range of 100 fg mL-1 to 50 ng mL-1. Significantly, it exhibited better specificity and accuracy with a sensitivity of 97.5% and a specificity of 96.7% to distinguish healthy donors, other lung diseases and TB patients compared to commercial ELISA assay, holding a promising prospect in clinical diagnosis.

Sensitive electrochemical measurement of nitric oxide released from living cells based on dealloyed PtBi alloy nanoparticles

Nitric oxide (NO), as a vital signaling molecule related to different physiological and pathological processes in living systems, is closely associated with cancer and cardiovascular disease. However, the detection of NO in real-time remains a difficulty. Here, PtBi alloy nanoparticles (NPs) were synthesized, dealloyed, and then fabricated to NP-based electrodes for the electrochemical detection of NO. Transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and nitrogen physical adsorption/desorption show that dealloyed PtBi alloy nanoparticles (dPtBi NPs) have a porous nanostructure. Electrochemical impedance spectroscopy and cyclic voltammetry results exhibit that the dPtBi NP electrode possesses unique electrocatalytic features such as low charge transfer resistance and large electrochemically active surface area, which lead to its excellent NO electrochemical sensing performance. Owing to the higher density of catalytical active sites formed PtBi bimetallic interface, the dPtBi NP electrode displays superior electrocatalytic activity toward the oxidation of NO with a peak potential at 0.74 V vs. SCE. The dPtBi NP electrode shows a wide dynamic range (0.09-31.5 μM) and a low detection limit of 1 nM (3σ/k) as well as high sensitivity (130 and 36.5 μA μM^-1 cm^-2). Moreover, the developed dPtBi NP-based electrochemical sensor also exhibited good reproducibility (RSD 5.7%) and repeatability (RSD 3.4%). The electrochemical sensor was successfully used for the sensitive detection of NO produced by live cells. This study indicates a highly effective approach for regulating the composition and nanostructures of metal alloy nanomaterials, which might provide new technical insights for developing high-performance NO-sensitive systems, and have important implications in enabling real-time detection of NO produced by live cells.

Coupling Natural Halloysite Nanotubes and Bimetallic Pt-Au Alloy Nanoparticles for Highly Efficient and Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

The aerobic oxidation of 5-hydroxymethylfurfural (HMF), a key platform compound derived from biomass, to 2,5-furandicarboxylic acid (FDCA) is a highly important reaction in the production of green and sustainable chemicals. Here, we developed a highly efficient and stable halloysite-supported Pt-Au alloy catalyst for the selective oxidation of HMF to FDCA. The catalyst was synthesized through the organosilane functionalization of halloysite nanotubes, followed by the in situ formation and dispersion of Pt-Au alloy nanoparticles on the internal and external surfaces of nanotubes. The composition, morphology, and structure of the prepared catalyst were characterized. The catalyst with the optimal composition of Pt/Au molar ratio of 1/4 and metal loading of 1.5 wt % exhibited outstanding catalytic activity for the oxidation of HMF to FDCA using O₂ as an oxidant with 100% conversion of HMF and 99% selectivity of FDCA. This excellent catalytic performance is mainly attributed to the high dispersion and alloying effects of bimetallic nanoparticles, which promoted the activation of reactants or intermediates and further improved FDCA selectivity. Furthermore, the halloysite-supported Pt/Au bimetallic catalyst showed high stability and reusability. This study provides a promising strategy by combining clay mineral halloysite and bimetallic alloys for developing efficient catalysts with high FDCA selectivity and stability for the oxidation of HMF to FDCA.

Effect of Micro-/Nanoparticle Hybrid Hydrogel Platform on the Treatment of Articular Cartilage-Related Diseases

Joint diseases that mainly lead to articular cartilage injury with prolonged severe pain as well as dysfunction have remained unexplained for many years. One of the main reasons is that damaged articular cartilage is unable to repair and regenerate by itself. Furthermore, current therapy, including drug therapy and operative treatment, cannot solve the problem. Fortunately, the micro-/nanoparticle hybrid hydrogel platform provides a new strategy for the treatment of articular cartilage-related diseases, owing to its outstanding biocompatibility, high loading capability, and controlled release effect. The hybrid platform is effective for controlling symptoms of pain, inflammation and dysfunction, and cartilage repair and regeneration. In this review, we attempt to summarize recent studies on the latest development of micro-/nanoparticle hybrid hydrogel for the treatment of articular cartilage-related diseases. Furthermore, some prospects are proposed, aiming to improve the properties of the micro-/nanoparticle hybrid hydrogel platform so as to offer useful new ideas for the effective and accurate treatment of articular cartilage-related diseases.