Dye adsorption by self-recoverable, adjustable amphiphilic graphene aerogel

Cationic cellulose nanofibers/chitosan auxiliary-dominated win-win strategy for paper yarn with superior color and physical performances

The colored and high-saline effluents during the traditional dyeing process poses serious environmental challenge. In our study, an eco-friendly cationic cellulose nano-fiber/chitosan (CCNF/CS) binary versatile auxiliary was designed for the neutral salt-free dyeing and physical enhancement of paper by mixing with pulp simply. Profiting from the rich cationic binding sites of CCNF/CS (Charge density: 3749.67 μmol/g), under near neutral conditions (pH = 6.2), the maximum adsorption capacity of anionic GL (Direct fast turquoise blue GL) on paper with 0.5 % CCNF/CS reached 1865.06 mg/g with a desirable evenness (45.5 % and 92.1 % higher than that of CCNF and NaCl group, respectively), and the dye uptake was up to 97 %. The spontaneous adsorption behavior was aligned with the pseudo-second-order and Langmuir models, with a primary physical mechanism enhanced by chemical forces. The combination of strong electronic attraction, hydrogen bonding, and n-π stacking effects granted CCNF/CS an enhanced proficiency in anionic dye adsorption. In addition, the tensile strength of the resulting paper yarn with 0.5 % CCNF/CS increased to 52.47 MPa under the optimal parameters, deriving from the CCNF/CS-induced inter-fiber cohesion. Overall, our research provided a green promising approach for the innovative neutral salt-free dyeing and mechanical enhancement of paper.

Unveiling the contemporary progress of graphene-based nanomaterials with a particular focus on the removal of contaminants from water: a comprehensive review

Water scarcity and pollution pose significant challenges to global environmental sustainability and public health. As these concerns intensify, the quest for innovative and efficient water treatment technologies becomes paramount. In recent years, graphene-based nanomaterials have emerged as frontrunners in this pursuit, showcasing exceptional properties that hold immense promise for addressing water contamination issues. Graphene, a single layer of carbon atoms arranged in a hexagonal lattice, exhibits extraordinary mechanical, electrical, and chemical properties. These inherent characteristics have led to a surge of interest in leveraging graphene derivatives, such as graphene oxide (GO), reduced graphene oxide and functionalized graphene, for water treatment applications. The ability of graphene-based nanomaterials to adsorb, catalyze, and photocatalyze contaminants makes them highly versatile in addressing diverse pollutants present in water sources. This review will delve into the synthesis methods employed for graphene-based nanomaterials and explore the structural modifications and functionalization strategies implemented to increase their pollutant removal performance in water treatment. By offering a critical analysis of existing literature and highlighting recent innovations, it will guide future research toward the rational design and optimization of graphene-based nanomaterials for water decontamination. The exploration of interdisciplinary approaches and cutting-edge technologies underscores the evolving landscape of graphene-based water treatment, fostering a path toward sustainable and scalable solutions. Overall, the authors believe that this review will serve as a valuable resource for researchers, engineers, and policymakers working toward sustainable and effective solutions for water purification.

Facile engineering of mesoporous silica for the effective removal of anionic dyes from wastewater: Insights from DFT and experimental studies

The discharge of dye effluents from the textile industries has become a major environmental issue due to its potential to impart serious harm to human health and aquatic life. Mesoporous silica due to its high chemical stability, large surface area, tunable morphologies, large pore volume and pore size and cost-effectiveness is commonly used to remove such dyes before recycling of the wastewater for agricultural, domestic, and industrial applications. However, the low colloidal stability, the fast aggregation of the silica particles and the slow etching of the silica surface often results in the fast deactivation of the adsorbents and limits their long-term applications. In this study, we report the functionalization of mesoporous silica (SBA-15) with ZnO nanoparticles for the effective removal of anionic dyes. The Zn-silica exhibited highly positive surface with a dipole moment of 172 Debye and high charge transfer efficacy with an energy bandgap (ΔE) of 3.35 eV as revealed by quantum chemical DFT simulations. It achieved excellent removal of Alizarin red dye reaching a removal efficiency of 99.99 % and an adsorption capacity of 50 mg/g. In the presence of heavy metal ions commonly present in wastewater (Cd2+, Co2+, Zn2+, Ni2+, Cu2+ and Hg2+), the Zn-silica maintain excellent stability, high selectivity, and reusability within 5 cycles without a significant decline in efficiency. This study thus presents an effective way of wastewater purification on cost-effective adsorbents for meeting the water scarcity demands.

Nanocellulose-based aerogels for water purification: A review

Water purification using thin membranes at high pressures through adsorption and size exclusion is the widely used mechanism due to its simplicity and enhanced efficiency compared to other traditional water purification methods. Aerogels have the potential to replace conventional thin membranes considering their unmatched adsorption/absorption capacity and higher water flux due to their unique highly porous (99 %) 3D structure, ultra-low density (~1.1 to 500 mg/cm³), and very high surface area. The availability of a large number of functional groups, surface tunability, hydrophilicity, tensile strength and flexibility of nanocellulose (NC) makes it a potential candidate for aerogel preparation. This review discusses the preparation and employment of NC-based aerogels in the removal of dyes, metal ions and oils/organic solvents. It also offers recent updates on the effect of various parameters that enhance its adsorption/absorption performance. The future perspectives of NC aerogels and their performance with the emerging materials chitosan and graphene oxide are also compared.

Application of Unsupervised Learning for the Evaluation of Aerogels' Efficiency towards Dye Removal-A Principal Component Analysis (PCA) Approach

Water scarcity is a growing global issue, particularly in areas with limited freshwater sources, urging for sustainable water management practices to insure equitable access for all people. One way to address this problem is to implement advanced methods for treating existing contaminated water to offer more clean water. Adsorption through membranes technology is an important water treatment technique, and nanocellulose (NC)-, chitosan (CS)-, and graphene (G)- based aerogels are considered good adsorbents. To estimate the efficiency of dye removal for the mentioned aerogels, we intend to use an unsupervised machine learning approach known as "Principal Component Analysis". PCA showed that the chitosan-based ones have the lowest regeneration efficiencies, along with a moderate number of regenerations. NC2, NC9, and G5 are preferred where there is high adsorption energy to the membrane, and high porosities could be tolerated, but this allows lower removal efficiencies of dye contaminants. NC3, NC5, NC6, and NC11 have high removal efficiencies even with low porosities and surface area. In brief, PCA presents a powerful tool to unravel the efficiency of aerogels towards dye removal. Hence, several conditions need to be considered when employing or even manufacturing the investigated aerogels.

Paddle-Wheel-Shaped Porous Cu(II)-Organic Framework with Two Different Channels as an Absorbent for Methylene Blue

The destruction of the ecological environment caused by human activity and modern industrial development is so severe that the water environment has become seriously polluted. Therefore, the exploration of high-efficiency absorbents has become one of the hot topics to solve this issue. Herein, a porous metal-organic framework [Cu(L)]·2.5H₂O·0.5DMF (1, DMF = N,N-dimethylformamide) was successfully constructed using a rigid N-heterocyclic 5-(4-(1H,3,4-triazol-1-yl)phenyl)isophthalic acid (H₂L) ligand. In particular, its structure includes the classical paddle-wheel-shaped secondary building units and two 1D channels with diameters of 7.2 and 3.2 Å, respectively. Complex 1 shows great sorption performance for methylene blue (MB) with a maximum capacity of 589 mg·g^-1. The various influence factors, including the time, dye concentration, adsorbent dosage, and the pH of the solution, are investigated respectively. Also, the adsorption process is more in line with the first-order kinetics and the Langmuir isothermal adsorption model. The strong electrostatic force and intermolecular forces are primarily responsible for the remarkable adsorption ability of MB.

Preparation of Bio-Based Aerogel and Its Adsorption Properties for Organic Dyes

The effective utilization of biomass and the purification of dye wastewater are urgent problems. In this study, a biomass aerogel (CaCO3@starch/polyacrylamide/TEMPO-oxidized nanocellulose, CaCO3@STA/PAM/TOCN) was prepared by combining nanocellulose with starch and introducing calcium carbonate nanoparticles, which exhibited a rich three-dimensional layered porous structure with a very light mass. Starch and nanocellulose can be grafted onto the molecular chain of acrylamide, while calcium carbonate nanopores can make the gel pore size uniform and have excellent swelling properties. Here, various factors affecting the adsorption behavior of this aerogel, such as pH, contact time, ambient temperature, and initial concentration, are investigated. From the kinetic data, it can be obtained that the adsorption process fits well with the pseudo-second-order. The Langmuir isotherm model can fit the equilibrium data well. The thermodynamic data also demonstrated the spontaneous and heat-absorbing properties of anionic and cationic dyes on CaCO3@STA/PAM/TOCN aerogels. The adsorption capacity of Congo red (CR) and methylene blue (MB) by CaCO3@STA/PAM/TOCN was 277.76 mg/g and 101.01 mg/g, respectively. Therefore, cellulose and starch-based aerogels can be considered promising adsorbents for the treatment of dye wastewater.

Methylene Blue Removed from Aqueous Solution by Encapsulation of Bentonite Aerogel Beads with Cobalt Alginate

It can be difficult to remove dark methylene blue (MB) from water effectively. The use of sodium alginate and bentonite (Ben) as the matrix produced a displacement reaction that occurred in cobalt chloride, which allowed Ben to be successfully encapsulated in cobalt alginate (CA). Finally, a vacuum freeze-drying method was used to prepare a low-cost composite of CA/Ben aerogel for adsorbing MB in aqueous solutions. In addition to scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy, the composites were also characterized and analyzed. Different adsorption experiments were conducted in order to determine the effects of dosage, pH, adsorption time, and temperature on the adsorption performance of the adsorbent. According to the results of the experiment, the adsorption capacity of CA/Ben aerogel was 258.92 mg·g^-1, and the pseudo-first-order kinetic model and Freundlich isotherm model can fully explain the adsorption process of MB on this aerogel. The composite material reported in this paper is easily recycled, and the removal rate reaches 65% after four times of recycling. Moreover, compared with other adsorbents, the composite material of the invention is highly environmentally friendly and has a simple preparation process. A large-scale application of this technology is the removal of dyes from water on a large scale.

Efficient and selective adsorption of methylene blue and methyl violet dyes by yellow passion fruit peel

As an important biomass resource, agricultural waste is of great significance to improve the application value. In this study, the yellow passion fruit peel (Y-PFP) was used as a biosorbent to remove cationic dyes (methylene blue (MB) and methyl violet (MV)) by the simple treatment process. And the effects of pH, contact time, initial dye concentration, ionic strength, and temperature on the adsorption performance of Y-PFP were studied. The adsorption process was consistent with the pseudo-second-order kinetic model and Langmuir isotherm. What's more, the maximum adsorption capacity for MB and MV was 324.7 and 485.4 mg·g^-1, respectively. And Y-PFP still exhibited high removal efficiency after five desorption-adsorption cycles. Thus, Y-PFP had highly valuable for the removal of cationic dyes from wastewater with a simple preparation process, low cost, excellent adsorption capacity and selectivity.

Cu(II) and Zn(II) frameworks constructed by directional tuning of diverse substituted groups on a triazine skeleton and supermassive adsorption behavior for iodine and dyes

The controllable design, synthesis and functional properties of a series of triazine tetratopic carboxylic MOFs have always been hotspots and challenges for research. Based on the characterization of the C-Cl bond on the triazine skeleton being easily substituted by some functional groups, we designed and synthesized a series of triazine tetratopic carboxylic Cu(II) and Zn(II) MOFs via the reaction of Cu(NO₃)₂·2.5H₂O and ZnSO₄·7H₂O, as well as triazine tetratopic carboxylic H₄TDBA-Cl (H₄TBDA-Cl = 5,5'-((6-chloro-1,3,5-triazine-2,4-diyl)bis(azanediyl))diisophthalic acid) under hydrothermal conditions. During the process of synthesizing, the C-Cl bond on the triazine skeleton of the ligand was substituted with different groups, which formed the complexes ([Cu₂(TBDA-Cl)(H₂O)·10DMF·30H₂O]_n) (DMF = N,N-dimethylformamide) (1), N(Me)₂ -[(CH₃)₂NH₂]₄·[Zn₃(HTBDA-N)₂(SO₄)₂]_n (2) and H ([Cu₂(TBDA-H)(H₂O)]_n) (3), respectively. It is worth noting that the in situ substitution reaction occurred for complexes 2 and 3 during the process of synthesis. Also, the structural analysis showed that the molecules in complexes 1-3 were connected with different building blocks to form different three-dimensional structures. We performed iodine adsorption experiments on the three complexes and found that there was a significant relationship between the structural configuration and adsorption behaviour. The results showed that the complex 1 with the Cl atom on the triazine skeleton could have a boosting effect on adsorption with iodine. It displayed a remarkable adsorption effect for iodine (in the solution of water: 7.6 g g^-1 and in the solution of cyclohexane: 548.2 mg g^-1). In addition, it also displayed the adsorption effect for JGB dye (204.9 mg g^-1). For complex 2, it displayed an uptake effect for iodine in the solution of cyclohexane (529 mg g^-1). The possible adsorption mechanism was also investigated. By comparison, we found that chlorine atoms could play an important role in the adsorption processes. The adsorption capacity of complex 1 (containing the chlorine atom in the structure) was much higher than that for complex 3.

Preparation of carboxymethyl cellulose/graphene composite aerogel beads and their adsorption for methylene blue

Carboxymethyl cellulose/ graphene composite aerogel beads (CMC/GAs) were prepared by the easily scaling-up method, i.e., wet spinning- environmental pressure drying method. The influences of the type and concentration of coagulating bath on the formation of aerogel beads were discussed, and the forming mechanism was analyzed. The CMC/GAs was characterized through SEM, XRD, FI-IR, Raman, XPS, electronic universal testing machine and other methods. The CMC/GAs-30 has an average particle size and a mean pore diameter of 3.83 mm and 82 μm, respectively. The analysis results indicated that the adsorption mechanisms of CMC/GAs on methylene blue (MB) are mainly through the electrostatic interaction. The adsorption process conforms to the Langmuir model (R² = 0.9964) and pseudo-second-order kinetic model (R² is higher than 0.99). When the particle size of CMC/GAs-30 decreases, the equilibrium adsorption capacity for MB increases. Under the experimental conditions explored, the Langmuir maximum adsorption capacity of CMC/GAs-30 for MB is 222.72 mg.g^-1. The CMC/GAs-30 show good recycle performance in MB adsorption. The removal rate of MB from water by CMC/GAs-30 remained at about 90% after 30-times adsorption- regeneration cycles.

Investigation of the adsorptive removal of methylene blue using modified nanocellulose

In this study, Ethylenediamine tetraacetic acid (EDTA) embedded nanocellulose (NCED) has been used to study the adsorptive removal of methylene blue (MB) from simulated wastewater. The morphological characterizations have been checked with FESEM, FETEM, AFM, and BET pore analysis, while the fingerprinting of the material has been analyzed with the help of FTIR, Raman spectroscopy, EDS, XRD and TGA. For the experimental designing involving four parameters that affect the removal efficiency of MB, the layout has been prepared with the help of Central Composite Design (CCD). For the correlation among the parameters and their subsequent impact on the removal percentage, response surface methodology (RSM) has been employed. Maximum removal percentage of MB using NCED was found out to be 91.14%. The adsorption process was found to be good fit with the Langmuir isotherm and Elovich kinetics model. From the thermodynamics study, the spontaneity and the endothermic nature of the process was confirmed. With the help of all the obtained data and the associated removal efficiency, NCED could play a role of cost-effective and eco-friendly alternative to the expensive methods of toxic dye removal from wastewater.

Macro-Reticular Ion Exchange Resins for Recovery of Direct Dyes from Spent Dyeing and Soaping Liquors

Dyes are a major class of organic pollutants that are well-known for their harmful impact on aquatic life and humans. Several new strategies for removing colours from industrial and residential effluents have recently emerged, with adsorption being the best option. The current study looked at the recovery of direct dyes from aqueous streams for reuse using macro-reticular ion exchange resins (IERs). The investigation includes dyeing single jersey cotton grey textiles with direct dyes from the Isma dye Company in Kafr El Dawar, Egypt. After centrifuging and separating the supernatant liquid, solutions from thirteen different dyes, produced at an average concentration between the wasted and soaping liquor concentrations, were calculated spectrophotometrically from the first dyeing trials. Kinetic data were well fitted with pseudo-second-order rate kinetics. The amounts of dye retained by the anion exchangers increased with a rise in temperature in the case of Strong Base Resin (SBR) and vice versa for Weak Base Resin (WBR). Batch adsorption experiments with SBR and WBR were conducted for each dye, and both Freundlich and Langmuir isotherms were constructed. It was found that adsorption obeyed both isotherms, that monolayer adsorption took place, and that the dye molecular weight, structure, and solubility, as well as the type of anionic resin used, had varying effects on the extent of absorption. The monolayer sorption capacities Q₀ determined from the Langmuir isotherm model for the strongly and weakly basic anion exchangers were found to be 537.6 and 692 mg/g for Direct Yellow RL, respectively. As a result, Yellow RL exhibited the greatest adsorption on both SBR and WBR. Orange GRLL, Blue 3B, and Congo Red, on the other hand, were the poorest colours absorbed by the IERs, whereas Blue RL demonstrated good adsorption by SBR and accelerated adsorption by WBR. Most of the dyes may be recovered and reused in this manner.

Magnesium/aluminum layered double hydroxides intercalated with starch for effective adsorptive removal of anionic dyes

In this research, the adsorptive performance of a starch-magnesium/aluminum layered double hydroxide (S-Mg/Al LDH) composite was investigated for different organic dyes in single-component systems by conducting a series of batch mode experiments. S-Mg/Al LDH composite showed preferential adsorption of anionic dyes than cationic dyes. The marked impact of key process variables (e.g., contact time, adsorbent dosage, pH, and temperature) on its adsorption was investigated. Multiple isotherms, kinetics, and thermodynamic models were applied to describe adsorption behavior, diffusion, and uptake rates of the organic dyes over S-Mg/Al LDH composite. A better fitting of the non-linear Langmuir model reflects the predominance of monolayered adsorption of dye molecules on the composite surface. Partition coefficients (mg g^-1 μM^-1) for S-Mg/Al LDH were observed in the following descending order: Amaranth (665) > Tartrazine (186) > Sunset yellow (71) > Eosin yellow (65). Furthermore, comparative evaluation of the adsorption enthalpy, entropy, and Gibbs free energy values indicates that the adsorption process is spontaneous and exothermic. S-Mg/Al LDH composite maintained a stable adsorption/desorption recycling process over six consecutive cycles with the advantages of low cost, chemical/mechanical stability, and easy recovery. The results of this study are expected to expand the application of modified LDHs toward wastewater treatment.

Fruit waste-derived cellulose and graphene-based aerogels: Plausible adsorption pathways for fast and efficient removal of organic dyes

A wide range of organic pollutants in industrial effluents, agricultural runoff, and domestic discharges are exacerbating water scarcity, leading to water-borne ailments, and adversely affecting the marine ecosystem and biodiversity. The efficient, sustainable, and cost-effective materials need to be addressed urgently for the removal of organic pollutants. Herein, ultra-light (0.018 g.cm^-3) and highly porous (96.4%) composite aerogel is prepared by gelatinization of graphene oxide with fruit waste-derived cellulose. The macroscopic porosity generated by interconnecting cellulosic skeleton and graphene oxide sheets via hydrogen bonding network provided ample avenues for transport and diffusion of organic dyes-enriched wastewater throughout the cellulose-graphene oxide composite aerogel (CGA). Consequently, organic dyes are efficiently adsorbed by easily accessible surface sites distributed throughout the CGA. The size, charge, and chemical structure of organic dyes along with textural features and accessible surface active sites of CGA governed the adsorption process. The spectroscopic analyses based on FTIR, Raman, and XPS measurements suggest electrostatic, n-π, π-π, cation-π interactions, dipole-dipole hydrogen, and Yoshida hydrogen linkages as major interactive pathways for the adsorption of organic dyes by the CGA. Moreover, the composite aerogel furnished an excellent recyclability for the adsorptive removal of organic pollutants from wastewater. The present work promises the potential of 2D nanostructured layered materials and fruit-waste-derived composite aerogels for sustainable utilization in wastewater treatment, which can be an excellent step towards water security.

Construction of manganese-based metal organic frameworks derived from aromatic dicarboxylic acids and application for the adsorption of iodine

In this work, we selected terephthalic acid or 2-amino-terephthalic acid as ligand, transition metal manganese salt as metal source under the solvothermal conditions to successfully construct two kinds of manganese-based metal-organic frameworks (Mn-MOFs): Mn3(BDC)3(H2O)2 (1) and Mn3(NH2-BDC)3(DMF)4 (2) (H2BDC = terephthalic acid; NH2-BDC = 2-amino terephthalic acid; DMF = N, N-dimethyl formamide). It was characterized by elemental analysis, IR spectrum, thermogravimetric analysis (TG), X-ray powder diffraction (PXRD) and UV-vis absorption spectrum. It was found that the packing structures of compounds 1 and 2 were constructed by the trinuclear Mn3O16 building block and exhibited different spatial structure: compound 1 was a three-dimensional structure, and 2 was a two-dimensional network structure. The iodine adsorption in cyclohexane solution properties of compounds 1 and 2 were investigated. Research results showed that the uncoordinated amino group in the structure of framework compounds has a great influence on the iodine adsorption capacity and compound 2 had good adsorption property and reusability.

Barium alginate as a skeleton coating graphene oxide and bentonite-derived composites: Excellent adsorbent based on predictive design for the enhanced adsorption of methylene blue

The phenomenon that calcium alginate does not exhibit high adsorption capacity as a carrier material has not been reasonably explained or solved. In this paper, a new viewpoint that the orbital energy level of metal ions and the binding degree of the α-l-guluronate and β-d-mannuronate units affect the adsorption performance of the composite was innovatively proposed. Taking barium alginate (BA) as an example, the possibility of replacing calcium alginate is discussed. Barium alginate/graphene oxide (BA/GO) membranes and three-dimensional (3D) barium alginate-bentonite-graphene oxide derived (3D-BA) hydrogels were prepared by vacuum freeze-drying to remove methylene blue. The structure and morphology of the prepared adsorbents were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetry and Fourier transform infrared spectroscopy. The effects of adsorbent dosage, doping ratio, temperature, contact time, pH value and initial dye concentration on the adsorption performance of BA composites were investigated. The adsorption capacities of the BA/GO and 3D-BA materials were 1011.3 and 710.3 mg/g, respectively. The BA/GO membrane exhibited stable filtration performance against high concentrations of dyes. Benefiting from the strong interaction between bentonite, sodium alginate and Ba²⁺, the 3D-BA hydrogel showed higher thermal stability and better adsorption efficiency than other materials. The Elovich kinetic model and Sips equation can appropriately describe the adsorption process. The results show that barium alginate is a better carrier material than calcium alginate.

Thiourea-functionalized graphene aerogel for the aqueous phase sensing of toxic Pb(II) metal ions and H2O2

A simpler approach of functionalization for the fabrication of thiourea-functionalized-Graphene Aerogel (t-GA) is described here. Graphene Aerogel (GA) was synthesized from bio-mass, which on a simpler oxidative treatment get converted to its water-soluble version due to the impregnation of several oxygenous functionalities like carboxylic, hydroxyl, etc. Further, these carboxylated groups have been functionalized with the molecules of thiourea using the long known dicyclohexylcarbodiimide (DCC) as a coupling agent. The as-synthesized t-GA shows bright yellow fluorescence with a quantum yield of ~3% and holds the high-aqueous solubility and photostability. The fluorescence property of t-GA has been used here for the specific and selective sensing of toxic lead (Pb(II)) metal ions from the used many other metal ions via the fluorescence quenching and showed a limit of detection ~7.3 nM. Further, the mechanism for selective sensing was studied in detail and found to be preferable via ligand to metal charge transfer quenching mechanism. The cyclic voltammetry studies supported the selective sensing of Pb(II). Moreover, t-GA has also been studied for the sensing of hydrogen peroxide and as a yellow fluorescent ink.

Synthesis of 3D graphene-based materials and their applications for removing dyes and heavy metals

Contamination of water streams by dyes and heavy metals has become a major problem due to their persistence, accumulation, and toxicity. Therefore, it is essential to eliminate and/or reduce these contaminants before discharge into the natural environment. In recent years, 3D graphene has drawn intense research interests owing to its large surface area, superior charge conductivity, and thermal conductivity properties. Due to their unique surface and structural properties, 3D graphene-based materials (3D GBMs) are regarded as ideal adsorbents for decontamination and show great potential in wastewater or exhaust gas treatment. Here, this minireview summarizes the recent progress on 3D GBMs synthesis and their applications for adsorbing dyes and heavy metals from wastewater based on the structures and properties of 3D GBMs, which provides valuable insights into 3D GBMs' application in the environmental field.

Preparation of biologically reduced graphene oxide-based aerogel and its application in dye adsorption

Graphene-based materials have attracted great attention in wastewater treatment due to their excellent adsorbability for refractory pollutants. However, the high cost, environmental pollution during preparation and the separation after adsorption are issues that restricted its widespread application. In this study, biologically reduced graphene oxide was prepared via bacterium Shewanella sp. CF8-6 in 12 h, and a 3D poly(vinyl alcohol)/BRGO aerogel (PVA-GA) was further synthesized using PVA as cross-linker. Results showed that BRGO had smooth surface, low I_D/I_G value (1.26) and smaller layer spacing (0.38 nm), indicating that the reaction process had little damage to GO structure. The prepared PVA-GA had strong mechanical strength and porous network structure, and its BET specific surface area was 59.02 m²/g. Benefit from the excellent structure of PVA-GA, it had good adsorption performance for methylene blue (MB) and Congo red (CR) (with removal rate of 94.62%, 93.97% and adsorption capacity of 135.17 mg/g, 134.24 mg/g at an initial dye concentration of 50 mg/L), and could maintain more than 75% removal rate after 5 cycles. This study developed a relatively mild and green way of graphene-based material synthesis and demonstrated the great potential of PVA-GA as an efficient and safe adsorbent for dye removal from wastewater.

Double-network cross-linked aerogel with rigid and super-elastic conversion: simple formation, unique properties, and strong sorption of organic contaminants

Novel adsorbents with high adsorption capacity, broad-spectrum adsorption performance, and good reusability are needed for the treatment of diverse and complex contaminants in water. In this work, we used in situ hydrothermal reaction to fabricate graphene oxide (GO) and poly(vinyl alcohol) (PVA) based aerogels (GP_XA, X represented the volume of PVA) through the cross-linking network that meets the above requirement. After adding Ca²⁺, GP₁₆A (with 16 mL PVA) had surprisingly rigid and super-elastic conversion that is dependent on water stimulus. The strong adsorption of methylene blue (MB) on GP₁₆A illustrated that it had excellent dye removal ability. The adsorption capacity of GP₁₆A to MB was 698.38 mg g^-1 and it remained 85.62% after repeated adsorption-desorption cycles. The adsorption was controlled by multiple mechanisms including electrostatic interaction, π-π interaction, and hydrogen bond. In addition, hydrophobically modified GP₁₆A (GP₁₆A-MTMS) effectively absorbed common oils and organic solvents. Repeated absorption of GP₁₆A-MTMS was re-activated by squeezing operation. This study provides an alternative technique for preparing aerogel materials with high recyclability, dimensional stability, and solvent resistance, and for dealing organic contaminants in water.

Facile preparation of robust dual MgO-loaded carbon foam as an efficient adsorbent for malachite green removal

This study developed a facile approach for the fabrication of dual MgO-loaded carbon foam (DMCF) via carbonization of a cured MgO/cyanate ester resin mixture, which underwent self-foaming of the resin followed by the carbothermal reduction of MgO. The features of the prepared DMCF prepared were characterized by FESEM, TEM, XRD, FTIR, XPS and so on, and the effects of adsorption conditions, adsorption isotherms, kinetics, and thermodynamics on malachite green (MG) removal using the DMCF as adsorbents were investigated through batch adsorption experiments. Results demonstrate that the DMCF possesses a unique dual loading of MgO particles which are not only loaded onto its foam walls but also filled within the walls with a graphene-wrapped core-shell structure. The experimental maximum adsorption capacity of MG reaches up to 1874.18 mg/g with a partition coefficient of 10.87 mg/g/μM. The adsorption process can be better described with Langmuir, pseudo-second-order, and intraparticle diffusion models. Moreover, the DMCF exhibits a removal percentage of 84.85% after five reuses, indicating that it is an efficient and promising adsorbent for MG adsorption.

Graphene-based materials for adsorptive removal of pollutants from water and underlying interaction mechanism

Graphene-based materials have received much attention as attractive candidates for the adsorptive removal of pollutants from water due to their large surface area and diverse active sites for adsorption. The design of graphene-based adsorbents for target pollutants is based on the underlying adsorption mechanisms. Understanding the adsorption performance of graphene-based materials and its correlation to the interaction mechanisms between the pollutants and adsorbents is crucial to the further development of graphene-based functional materials and their practical applications. This review summarizes recent advances on the development of graphene-based materials for the adsorption of heavy metal ions, dyes, and oils, and the co-adsorption of their mixture from water. The material design, performance, regeneration and reuse of adsorbents, and the associated adsorption mechanisms are discussed. Various techniques for mechanistic studies of the adsorption of heavy metal ions, dyes, and oils on graphene-based materials are highlighted. The remaining challenges and perspectives for future development and investigation of graphene-based materials as adsorbents are also presented.

A facile synthesis of graphene oxide/locust bean gum hybrid aerogel for water purification

Graphene oxide/locust bean gum (GO/LBG) aerogels, synthesized in an ice crystal template without using any chemical modifiers, were used for the treatment of water pollution. Various characterization results showed that GO/LBG aerogel exhibited a network-like three-dimensional (3D) structure with large specific surface area. The adsorption data revealed that GO/LBG aerogels with GO/LBG mass ratio of 1:4 (GO/LBG-1 aerogels) exhibited more prominent adsorption properties for Rhodamine-B (RhB, 514.5 mgg^-1) than Indigo Carmine (IC, 134.6 mgg^-1). Simultaneously, GO/LBG-1 aerogels could selectively remove RhB from a binary mixed solution of RhB-IC dyes. Furthermore, GO/LBG-1 aerogels also displayed excellent reusability and could still reach 92.4 % after ten cycles. Based on the above results, GO/LBG-1 aerogel could be considered as an ideal adsorbent with potential application value for removing water-soluble RhB from wastewater.

Facile synthesis of chitosan-based acid-resistant composite films for efficient selective adsorption properties towards anionic dyes

To effectively and selectively remove toxic anionic dyes which are heavily discharged and to promote them recovery, a sustainable cellulose nanofiber/chitosan (CNF/CS) composite film was elaborately designed through a facile procedure. Based on the strong supporting effect of CNF and excellent compatibility between CNF and CS, the composite film presents low swelling and acid-proof properties, which can prevent the adsorption process from the disintegration of adsorbent. Moreover, the positive electrical property of CNF/CS film increases the discrepancy in adsorption capacities for anionic and cationic dyes. The maximum adsorption capacity of anionic methyl orange (MO) on CNF/CS film reaches 655.23 mg/g with a desirable recyclability. The adsorption behavior attributed to a physico-chemical and monolayer adsorption process. This work opens a new route for the development of eco-friendly and highly efficient adsorbents on selective removal and recycling of anionic dyes from wastewater.

Zeolite modification with cellulose nanofiber/magnetic nanoparticles for the elimination of reactive red 198

In this paper for the first time, a cost-effective reinforced zeolite with cellulose nanofibers and magnetic nanoparticles (MZeo/Cellulose nanofiber) was used for the elimination of reactive red 198 (RR198) dye. The fabricated sorbent was characterized by SEM, FTIR, and XRD. The effect of operational parameters, including pH, RR198 concentration, the mass ratios of zeolite to cellulose nanofiber and zeolite coated cellulose to Fe₃O₄ nanoparticles, contact time, agitation speed, sorbent dosage, and temperature were studied. The prepared sorbent exhibited the maximum removal efficiency of 99% for RR198 removal at 30 °C. The presence of other dyes along with the target dye did not negatively affect the adsorption process and RR198 removal efficiency from actual water samples seemed satisfactory and rational. Equilibrium studies confirmed that both Langmuir and Freundlich models described the RR198 adsorption on MZeo/Cellulose nanofiber indicating physical and chemical interactions between the sorbent and RR198 molecules. Kinetic studies demonstrated that pseudo-second-order fitted best with experimental data. Also, thermodynamic studies showed the endothermic nature of the adsorption process. Compared to zeolite, MZeo/Cellulose nanofiber represented a promising removal efficiency for the elimination of RR198 dye from contaminated water.

A Double cross-linked strategy to construct graphene aerogels with highly efficient methylene blue adsorption performance

A novel lysine and EDA double cross-linked graphene aerogel (LEGA) was constructed. The prepared LEGA was utilized as a methylene blue (MB) adsorbent in the wastewater treatment. It exhibits a three-dimensional interconnected porous structure benefiting dye adsorption. Its compression property is highly enhanced with the addition of lysine. Adsorption isotherm and kinetics of MB onto LEGA were discussed. Their results show that MB adsorption onto LEGA was fitted to follow Langmuir adsorption isotherm model and the pseudo-second-order kinetic model. LEGA has an excellent adsorption capacity towards MB as high as 332.23 mg/g and its MB adsorption process is proved to be an exothermic process. The mechanism for MB adsorption onto LEGA was proposed as the ion exchange, electrostatic interaction, π-π stacking interaction and hydrogen bonding. Thus, LEGA is confirmed to be a sustainable and green MB adsorbent with highly removal efficiency in the treatment of wastewater.

A highly sensitive and selective method for the determination of ceftiofur sodium in milk and animal-origin food based on molecularly imprinted solid-phase extraction coupled with HPLC-UV

The effective analysis of cephalosporin antibiotics in food animals has attracted considerable attention. Herein, a high-performance liquid chromatograph equipped with a UV method based on molecularly imprinted-solid phase extraction (MISPE-HPLC-UV) was developed for preconcentration, cleanup and determination of ceftiofur sodium (CTFS) in food samples. In this method, an eco-friendly molecularly imprinted polymer (MIP) was synthesized and employed as an adsorbent, which exhibited excellent selectivity towards CTFS in water, and adsorption equilibrium could be reached within 1 h. Under the optimized conditions, good linearity was obtained for CTFS in the range of 0.005-1.0 mg L^-1 with a lower LOD of 0.0015 mg L^-1, and the average recoveries were higher than 91.9% (RSD less than 8.5%) at three spiked levels in milk, chicken, pork and beef samples. After 20 cycles, the recovery of the MISPE cartridge for CTFS was still higher than 95%, which proved that the MISPE-HPLC-UV method was highly sensitive and selective for the analysis of CTFS in food samples.

Assembly of Ultralight Dual Network Graphene Aerogel with Applications for Selective Oil Absorption

High-performance graphene aerogels with well-developed internal structures are generally obtained by means of introducing additive materials such as carbon nanotubes, cellulose, and lignin into the aerogel network, which not only enhances the cost but also complicates the preparation process. Therefore, tailoring the internal structure of pristine graphene aerogel in a feasible way to achieve high performance is of great significance to the practical applications. Herein, a novel cysteamine/l-ascorbic acid graphene aerogel (CLGA) was fabricated by a simple one-step hydrothermal method followed by freeze-drying. Through the creative combination of the reducing agent l-ascorbic acid and cross-linking agent cysteamine, a dual-network structure was constructed by both layered physical stacking and vertical chemical cross-linking. The addition of cysteamine not only enhanced the reduction degree but also assisted the formation of more vertical connections between graphene nanosheets, resulting in more abundant pores with smaller sizes compared with graphene aerogels prepared by the traditional hydrothermal reduction method. CLGA possessed an ultra-low density of 4.2 mg/cm³ and a high specific surface area of 397.9 m²/g. As expected, this dual-network structure effectively improved the absorption capacity toward a variety of oil and organic solvents, with an outstanding oil absorption capacity up to 310 g/g. Furthermore, CLGA possessed good mechanical properties and oil/water selectivity. The absorbed oil could be recovered by both continuous absorption-removal process and mechanical squeezing, making the as-prepared aerogel superior absorbent material for a variety of applications, such as selective oil absorption and water treatment.

One-step synthesis of functional metal organic framework composite for the highly efficient adsorption of tylosin from water

Functional metal organic framework composite can effectively remove antibiotics from environmental water samples. However, designing excellent adsorbents with multiple active sites via a rapid one-step method is still a challenging problem. A novel metal organic framework composite (UiO-66-NH₂-AMPS) was synthesized through one-step polymerization by adding functional monomer 2-acrylamide-2-methylpropanesulfonic acid (AMPS) during the preparation of UiO-66-NH₂. The microstructure and morphology of the UiO-66-NH₂-AMPS composite were characterized, and the adsorption performance towards tylosin (TYL) in water was explored by equilibrium adsorption experiment. The results illustrated that the adsorption equilibrium can be reached within 1 h, and the maximum binding amount of UiO-66-NH₂-AMPS for TYL was 161.60 mg g^-1, which was approximately 2.1-329 times of that of the other adsorbents. The pseudo second-order kinetic and Liu isotherm model were suitable for the adsorption process, and thermodynamic study displayed that the adsorption of UiO-66-NH₂-AMPS composite for TYL is spontaneous and endothermal. The infrared and X-ray photoelectron spectra exhibited that hydrogen bond and electrostatic interaction were the primary recognition force for TYL. The UiO-66-NH₂-AMPS composite have been successfully applied to remove TYL from environmental water. After 5 cycles, the removal efficiency of UiO-66-NH₂-AMPS was still above 91.30%.

Mechanistic understanding of the adsorption and thermodynamic aspects of cationic methylene blue dye onto cellulosic olive stones biomass from wastewater

In the current study, the mechanistic understanding of the adsorption isotherm and thermodynamic aspects of cationic methylene blue (MB) dye adsorption onto cellulosic olive stones biomass from wastewater were investigated. The batch adsorption of MB onto the olive stones (black and green olive stones) was tested at a variety of pH, dye concentrations, temperatures, and biomass particle sizes. The adsorption thermodynamics such as Gibbs free energy, enthalpy, and entropy changes were also calculated. Moreover, the desorption studies of MB from the spent olive stones were studied to explore the re-usability of the biomasses. The results revealed that under the optimum pH of 10, the maximum MB uptake was achieved i.e. 80.2% for the green olive stones and 70.9% for the black olive stones. The green olive stones were found to be more efficient in remediating higher MB concentrations from water than the black olive stones. The highest MB removal of the green olive stones was achieved at 600 ppm of MB, while the highest MB removal of the black olive stones was observed at 50 ppm of MB. Furthermore, for almost all the concentrations studied (50-1000 ppm), the MB adsorption was the highest at the temperature of 45 °C (P value < 0.05). It was shown by the Fourier transform infrared that the electrostatic interaction and hydrogen bonding were proposed as dominant adsorption mechanisms at basic and acidic pH, respectively. While the hydrophobic-hydrophobic interaction was a dominant mechanism at neutral pH. The thermodynamic studies revealed that the adsorption process was endothermic, spontaneous, and favorable. Moreover, the real wastewater experiment and the desorption studies showed that the green and black olive stones were a cost-effective and promising adsorbents for MB remediation from wastewater on account of their high adsorption and desorption removal capacities.

Directionally-Grown Carboxymethyl Cellulose/Reduced Graphene Oxide Aerogel with Excellent Structure Stability and Adsorption Capacity

A novel three-dimensional carboxymethyl cellulose (CMC)/reduced graphene oxide (rGO) composite aerogel crosslinked by poly (methyl vinyl ether-co-maleic acid)/poly (ethylene glycol) system via a directional freezing technique exhibits high structure stability while simultaneously maintaining its excellent adsorption capacity to remove organic dyes from liquid. A series of crosslinked aerogels with different amounts of GO were investigated for their adsorption capacity of methylene blue (MB), which were found to be superb adsorbents, and the maximum adsorption capacity reached 520.67 mg/g with the incorporation of rGO. The adsorption kinetics and isotherm studies revealed that the adsorption process followed the pseudo-second-order model and the Langmuir adsorption model, and the adsorption was a spontaneous process. Furthermore, the crosslinked aerogel can be easily recycled after washing with dilute HCl solution, which could retain over 97% of the adsorption capacity after recycling five times. These excellent properties endow the crosslinked CMC/rGO aerogel’s potential in wastewater treatment and environment protection.