Porous dendritic PtRuPd nanospheres with enhanced catalytic activity and durability for ethylene glycol oxidation and oxygen reduction reactions

One-pot Synthesis of PdCuAg and CeO2 Nanowires Hybrid with Abundant Heterojunction Interface for Ethylene Glycol Electrooxidation

Introducing CeO2 into Pd-based nanocatalysts for electrocatalytic reactions is a good way to solve the intermediate toxicity problem and improve the catalytic performance. Here we reported a simple strategy to synthesize the PdCuAg and CeO2 nanowires hybrid via a one-pot synthesis process under strong nanoconfined effect of specific surfactant as templates. Owing to the structural (ultrathin nanowires, abundant heterojunction/interfaces between metal and metal oxide) and compositional (Pd, Cu, Ag, CeO2) advantages, the hybrid showed significantly enhanced catalytic activity (6.06 A mgPd -1) and stability, accelerated reaction rate, and reduced activation energy toward electrocatalytic ethylene glycol oxidation reaction.

Bi2Te3 nanosheets promoted Pd for ethylene glycol electrooxidation both in the dark and under visible light irradiation

Ethylene glycol electrooxidation catalyzed by Pd nanoparticles was found to be largely improved by Bi2Te3 nanosheets both in the dark and under visible light irradiation.

Alkali Etching of Porous PdCoZn Nanosheets for Boosting C-C Bond Cleavage of Ethylene Glycol Oxidation

Pd-based electrocatalysts are the most effective catalysts for ethylene glycol oxidation reaction (EGOR), while the disadvantages of poor stability, low resistance to neutrophilic, and low catalytic activity seriously hamper the development of direct ethylene glycol fuel cells (DEGFCs). In this work, defect-riched PdCoZn nanosheets (D-PdCoZn NSs) with ultrathin 2D NSs and porous structures are fabricated through the solvothermal and alkali etching processes. Benefiting from the presence of defects and ultrathin 2D structures, D-PdCoZn NSs demonstrate excellent electrocatalytic activity and good durability against EGOR in alkaline media. The mass activity and specific activity of D-PdCoZn NSs for EGOR are 9.5 A mg-1 and 15.7 mA cm-2 , respectively, which are higher than that of PdCoZn NSs, PdCo NSs, and Pd black. The D-PdCoZn NSs still maintain satisfactory mass activity after long-term durability tests. Meanwhile, in situ IR spectroscopy demonstrates that the presence of defects attenuated the adsorption of intermediates, which improves the selectivity of the C1 pathway with excellent anti-CO poisoning performance. This work not only provides an effective synthetic strategy for the preparation of Pd-based nanomaterials with defective structures but also indicates significant guidance for optimum C1 pathway selectivity of ethylene glycol and other challenging chemical transformations.

Facile Synthesis of Multifunctional Ni(OH)2 -Supported Core-Shell Ni@Pd Nanocomposites for the Electro-Oxidation of Small Organic Molecules

In the domain of proton exchange membrane fuel cells (PEMFCs), the development of efficient and durable catalysts for the electro-oxidation of small organic molecules, especially of alcohols (methanol, ethanol, ethylene glycol, et al.) has always been a hot topic. A large number of related electrocatalysts with splendid performance have been designed and synthesized till now, while the preparation processes of most of them are demanding on experimental operations and conditions. Herein, we put forward a facile and handy method for the preparation of multifunctional Ni(OH)2 -supported core-shell Ni@Pd nanocomposites (Ni(OH)2 /Ni@Pd NCs) with the assistance of galvanic replacement reaction (GRR) at room temperature and ambient pressure. As expected, the Ni(OH)2 substrate can prevent the aggregation of core-shell (CS) Ni@Pd nanoparticles (NPs) and inhibit the formation of COads and further prevent Pd from being poisoned. The synergistic effect between CS Ni@Pd NPs and Ni(OH)2 substrate and the electronic effect between Pd shell and Ni core contribute to the outstanding electrocatalytic performance for methanol, ethanol, and ethylene glycol oxidation in alkaline condition. This study provides a succinct method for the design and preparation of efficient Pd-based electrocatalysts for alcohol electro-oxidation.

One-pot wet-chemical fabrication of 3D urchin-like core-shell Au@PdCu nanocrystals for electrochemical breast cancer immunoassay

Carbohydrate antigen 15-3 (CA15-3) is an important biomarker for early diagnosis of breast cancer. Herein, a label-free electrochemical immunosensor was built based on three-dimensional (3D) urchin-like core-shell Au@PdCu nanocrystals (labeled Au@PdCu NCs) for highly sensitive detection of CA15-3, where K3[Fe(CN)6] behaved as an electroactive probe. The Au@PdCu NCs were synthesized by a simple one-pot wet-chemical approach and the morphology, structures, and electrocatalytic property were investigated by several techniques. The Au@PdCu NCs prepared worked as electrode material to anchor more antibodies and as signal magnification material by virtue of its exceptional catalytic property. The developed biosensor exhibited a wide linear detection range from 0.1 to 300 U mL-1 and a low limit of detection (0.011 U mL-1, S/N = 3) for determination of CA15-3 under the optimal conditions. The established biosensing platform exhibits some insights for detecting other tumor biomarkers in clinical assays and early diagnosis.

One-pot synthesis of PdPtAg porous nanospheres with enhanced electrocatalytic activity toward polyalcohol electrooxidation

Porous nanospheres (PNSs) have great development prospects in the electrocatalysis field because of their structural characteristics, such as a large specific surface area. However, it is still a challenge to find a simple and energy-saving method for the controllable synthesis of PNS nanocatalysts. In this paper, a one-pot CTAC-assisted strategy was developed for the successful formation of PdPtAg PNSs with high porosity at room temperature. Benefitting from the unique structures, optimized composition, acceleration of charge transfer and enhanced resistance to CO poisoning, the PdPtAg PNSs displayed considerably improved electrocatalytic performance with high mass activity and stability toward the ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). The EGOR and GOR mass activities of PdPtAg were 5.00 A mg_metal^-1 and 3.06 A mg_metal^-1, which are 6.22 and 1.91 times that of commercial Pd/C, respectively. This work is expected to offer a new path for improving catalytic performance by simple design and adjustment of morphology.

Rhodium metallene-supported platinum nanocrystals for ethylene glycol oxidation reaction

Low-temperature fuel cells have great application potential in electric vehicles and portable electronic devices, which need advanced electrocatalysts. Controlling the composition and morphology of electrocatalysts can effectively improve their catalytic performance. In this work, a Rh metallene (Rhlene)-supported Pt nanoparticle (Pt/Rhlene) electrocatalyst is successfully synthesized by a simple chemical reduction method, in which ultra-small Pt nanoparticles are uniformly attached to the Rhlene surface due to the high surface area of Rhlene. Pt/Rhlene reveals a 3.60-fold Pt-mass activity enhancement for the ethylene glycol oxidation reaction in alkaline solution compared with commercial Pt black, and maintains high stability and excellent poisoning-tolerance during electrocatalysis, owing to the specific physical/chemical properties of Rhlene. The superior electrocatalytic performance of Pt/Rhlene may open an avenue to synthesize other metallene-supported noble metal nanoparticle hybrids for various electrocatalytic applications.

Co,N-doped carbon sheets prepared by a facile method as high-efficiency oxygen reduction catalysts

Transition metal and nitrogen codoped carbon materials have emerged as one of the most promising candidates to replace noble metal-based oxygen reduction reaction (ORR) catalysts. However, the development of high-efficiency, stable and low-cost metal-nitrogen-carbon catalysts still remains a challenge. In this study, cobalt and nitrogen codoped carbon sheet catalysts were successfully prepared by a simple self-injected vapor phase growth and template method. The catalysts exhibited a multilevel pore structure with a large specific surface area and resulting physical characteristics. The catalysts have excellent onset and half-wave potentials during the ORR. Notably, the onset (E ₀) and half-wave potential (E _1/2) in alkaline media for the Co-N-C-43.8 catalyst are 31 mV and 3 mV higher than those of a commercial Pt/C catalyst, respectively. Moreover, the durability of the Co-N-C-43.8 catalyst remains at a 93% current density after 10 000 s, while that of a commercial Pt/C catalyst only remains at 83%. Also, the Co-N-C-43.8 catalyst has little change in the current density after the addition of methanol. These results indicate that the Co,N-doped carbon sheet is a promising ORR catalyst.

Simple Synthesis of PdAg Porous Nanowires as Effective Catalysts for Polyol Oxidation Reaction

The development of efficient and stable Pd-based electrocatalysts is extremely important to facilitate the development of catalysts for polyol oxidation reactions. To synthesize Pd-based catalysts with excellent catalytic performance, a series of PdAg porous nanowires (PdAg PNWs) with different elemental ratios was constructed by facile synthesis using a seed-mediated method. The synthesized PdAg PNWs have a rough surface and a porous one-dimensional structure, which optimize the specific surface area and surface area of catalysts, thereby providing more active sites for catalysts. PdAg PNWs benefited from the geometric effect of porous nanowires and the synergy between Pd and Ag, showing excellent catalysis (8243.0 and 4137.0 mA mg_Pd^-1) for the ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). Among them, the optimal Pd₆₂Ag₃₈ PNWs show the highest catalytic activity (6.0 times and 3.9 times higher than Pd/C) and stability compared with Pd₅₇Ag₄₃ PNWs, Pd₅₁Ag₄₉ PNWs, and Pd/C for EGOR and GOR. At the same time, this porous one-dimensional structure also endows PdAg PNWs with faster electron transfer capabilities than Pd/C. This work will likely provide an effective strategy for constructing cost-effective catalysts.

Ultrathin and Porous 2D PtPdCu Nanoalloys as High-Performance Multifunctional Electrocatalysts for Various Alcohol Oxidation Reactions

We precisely synthesized two-dimensional (2D) PtPdCu nanostructures with the morphology varying from porous circular nanodisks (CNDs) and triangular nanoplates (TNPs) to triangular nanoboomerangs (TNBs) by tuning the molar ratios of metal precursors. The PtPdCu trimetallic nanoalloys exhibit superior electrocatalytic performances to alcohol oxidation reactions due to their unique structural features and the synergistic effect. Impressively, PtPdCu TNBs exhibit a high mass activity of 3.42 mg_Pt+Pd^-1 and 1.06 A·mg_Pt^-1 for ethanol and methanol oxidation compared to PtPd, PtCu, and pure Pt, which is 3.93 and 4.07 times that of commercial Pt/C catalysts, respectively. Moreover, 2D PtPdCu TNPs and PtPdCu CNDs also show a highly improved electrocatalytic activity. Furthermore, as all-in-one electrocatalysts, PtPdCu nanoalloys display excellent electrocatalytic activity and stability toward the oxidation of other alcohol molecules, such as isopropyl alcohol, glycerol, and ethylene glycol. The enhanced mechanism was well proposed to be the abundant active sites and upshifted d-band center based on density functional theory calculations.

Fabrication of cobaltous telluride and carbon composite as a promising carrier for boosting electro oxidation of ethylene glycol on palladium in alkaline medium

The development of highly active and earth-rich electrocatalysts remains a formidable challenge for the commercialization of fuel cells. Herein, a composite carrier composed of cobaltous telluride (CoTe) and carbon (C) has been designed for the first time to enhance the electrocatalytic performance of palladium (Pd) nanoparticles (NPs) for the electro-oxidation of ethylene glycol (EG). Remarkably, the mass activity for the as-prepared Pd/CoTe-C catalyst during the ethylene glycol oxidation reaction (EGOR) is found to reach up to 3917.3 mA mg^-1, which is 2.2 times higher than that of Pd/Co-C (1785.0 mA mg^-1) and 4.1 times greater than that of commercial Pd/C catalyst (962.4 mA mg^-1), exceeding that obtained for most Pd-based electrocatalysts reported thus far. In particular, the Pd/CoTe-C catalyst shows better electrochemical stability toward the EGOR than the Pd/Co-C and commercial Pd/C catalysts. Thus, the Pd/CoTe-C electrocatalyst is expected to exhibit broad application prospects in the field of fuel cells.

Engineering Heterostructured Pd-Bi2Te3 Doughnut/Pd Hollow Nanospheres for Ethylene Glycol Electrooxidation

The electrooxidation of ethylene glycol (EG) is of vital significance for the conversion from biomass energy into electrical energy via direct fuel cells. However, the EG oxidation reaction (EGOR) suffers from poor efficiency due to the limitation of high-performance electrocatalysts for cleaving the C-C bonds. Herein, this limitation is successfully addressed by fabricating the doughnut-shaped Pd-Bi₂Te₃ heterostructured catalyst. Notably, the heterojunction Pd-Bi₂Te₃ nanocatalyst has been demonstrated to be highly active toward the EGOR with superb activity and durability, in which a mass activity as high as 2420.8 mA mg^-1 is achieved in alkaline media, being 1.7 times higher than that of the commercial Pd/C catalyst. Upon combination of experimental results with mechanism studies, it is indicated that the remarkable EGOR performance is attributed to the enlarged active areas that stemmed from the doughnut-like structure, as well as the strong synergistic effect from Pd-Bi₂Te₃ and Pd. More importantly, the highly electroactive Pd-Bi₂Te₃ can accelerate charge transfer and boost the oxidation of CO-like intermediates, which are conducive to the enhancement in electrochemical stability.

Electrocatalysts for the Oxygen Reduction Reaction: From Bimetallic Platinum Alloys to Complex Solid Solutions

The oxygen reduction reaction has been the object of intensive research in an attempt to improve the sluggish kinetics that limit the performance of renewable energy storage and utilization systems. Platinum or platinum bimetallic alloys are common choices as the electrode material, but prohibitive costs hamper their use. Complex alloy materials, such as high-entropy alloys (HEAs), or more generally, multiple principal component alloys (MPCAs), have emerged as a material capable of overcoming the limitations of platinum and platinum-based materials. Theoretically, due to the large variety of active sites, this new kind of material offers the opportunity to identify experimentally the optimal binding site on the catalyst surface. This review discusses recent advances in the application of such alloys for the oxygen reduction reaction and existing experimental challenges in the benchmarking of the electrocatalytic properties of these materials.

Recent Progress on Polyvinyl Alcohol-Based Materials for Energy Conversion

Electrocatalytic energy conversion shows a promising “bridge” to mitigate energy shortage issues and minimizes the ecological implications by synergy with the sustainable energy sources, which calls for low-cost, highly active,...

Electronic structure optimization boosts Pd nanocrystals for ethanol electrooxidation realized by Te doping

Te doping greatly modifies the electronic structure of Pd and promotes the electrocatalytic performance towards EOR.

Mechanisms for Cr(VI) reduction by alcohols over clay edges: Reactive differences between ethanol and ethanediol, and selective conversions to Cr(IV), Cr(III) and Cr(II) species

Catalytic reduction by alcohols over clay minerals works efficiently under a wide range of pH and represents an emerging approach to control Cr(VI) contamination. Herein, mechanisms for Cr(VI) adsorption and reduction at clay edges are addressed by dispersion-corrected periodic DFT calculations, considering different active sites, and types (monohydric and polyhydric) and coverage of alcohols. Cr(VI) adsorbs favorably at clay edges, forming direct bonds and strong H-bonds. Mechanisms for Cr(VI) reduction by alcohols are largely determined by π-conjugation development, and efficient conversion conduces to Cr(VI) removal. Cr(II), Cr(III) and Cr(IV) are useful for different purposes, and high selectivity towards these products is realized through rational catalysts design: 1) Cr(IV) dominates at Al³⁺ site with all ethanol coverage, Al³⁺ site with high-coverage ethanediol, and Mg²⁺ site with low-coverage ethanol; 2) Cr(III) dominates at Al³⁺ and Mg²⁺ sites with low-coverage ethanediol; 3) Cr(II) dominates at Mg²⁺ site with high-coverage ethanol or ethanediol. Results agree finely with experimental observations available, and significant new insights have been provided for Cr management and recycling. Detailed electronic structure and vibrational analyses, which can also guide future experimental studies, manifest that Cr(VI) reduction progresses are effectively monitored by ESR and FT-IR techniques.

One-pot synthesis of rugged PdRu nanosheets as the efficient catalysts for polyalcohol electrooxidation

Recently, intensive attention has been attracted to the two-dimensional metal nanosheets, owing to their excellent electrocatalytic performance for direct alcohol fuel cells (DAFCs). Herein, PdRu nanosheets have been synthesized successfully by a facile one-pot method. The rugged nanosheet structure provided plentiful surface active sites to enhance the electrocatalytic activity. Moreover, benefiting from the synergistic effect and improved electronic structure, PdRu NSs exhibited splendid electrocatalytic performance in ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). Specifically, the mass activity of PdRu NSs was 1.72 and 3.69 times over those of Pd NSs and Pd/C catalysts in EGOR. Moreover, PdRu NSs displayed the largest mass activity in GOR, 1.48 and 2.47 times as large as Pd NSs and Pd/C catalysts. The results of stability tests demonstrated that the durability of PdRu NSs was the highest among the obtained catalysts. This work plays a directive role on the in-depth engineering on Pd-based catalysts with nanosheet architectures.

An electrochemical biosensor based on hemin/G-quadruplex DNAzyme and PdRu/Pt heterostructures as signal amplifier for circulating tumor cells detection

Metastasis due to circulating tumor cells (CTCs) shed from the original tumor accounts for the majority of cancer-related death. Efficient CTCs detection is pivotal to the diagnosis of early cancer metastasis. In this work, Platinum nanoparticles (PtNPs) decorated hyperbranched PdRu nanospines (PdRu/Pt) hierarchical structures were firstly synthesized to detect CTCs with the assistance of DNAzyme. Meanwhile, Super P and gold nanoparticles (AuNPs) acted as sensing medium to improve electrical conductivity and immobilization of anti-EpCAM antibody to specifically capture model CTCs. After immune-conjugation of anti-EpCAM-MCF-7-signal probes on the gold electrode, PtNPs, PdRu nanospines (PdRuNSs) and hemin/G-quadruplex co-catalyzed substrate H₂O₂ to realize multiplexed signal amplification, which significantly improves the analytical performance of the electrochemical biosensor. As-proposed biosensor reached a limit of detection (LOD) down to 2 cells mL^-1 and showed a wide detection range of 2 to 10⁶ cells mL^-1. Application of the biosensor to detect MCF-7 cells spiked human blood samples further demonstrated the feasibility for early cancer evaluation in clinic.

Hydrothermal-Induced Formation of Well-Defined Hollow Carbons with Curvature-Activated N-C Sites for Zn-Air Batteries

Metal-free carbons have been regarded as one of the promising materials alternatives to precious-metal catalysts for oxygen reduction reaction (ORR) due to their high activity and stability. In this paper, well-defined N-doped hollow carbons (NHCs) are firstly synthesized by using an ammonia-based hydrothermal synthesis that is environmentally friendly and suitable for mass production in industry and a commercial black carbon as raw material. Moreover, the shell thickness of the NHCs can be easily tuned by this hydrothermal strategy. Zn-air battery test results reveal shell thickness-dependent activity and durability for ORR over the NHCs, which exceeds that obtained by commercial Pt/C (20 wt %). The enhanced battery performance can be attributed to the curvature-activated N-C moieties on the hollow carbon surface, which served as the main active sites for ORR as evidenced by DFT calculations. The proposed approach may open a way for designing curved hollow carbons with high graphitization degree and dopant nitrogen level for metal-air batteries or fuel cells.

Fe(II)-Assisted one-pot synthesis of ultra-small core-shell Au-Pt nanoparticles as superior catalysts towards the HER and ORR

In this work, uniform ultra-small core-shell Au-Pt nanoparticles (denoted as USCS Au-Pt NPs) with Au-decorated Pt surfaces are successfully prepared by Fe(ii)-assisted one-pot co-reduction of Au(iii) ions and Pt(ii) ions in a citrate solution. The as-prepared USCS Au38.4@Au9.3Pt52.3 NPs have an average diameter of 2.3 ± 0.5 nm. It is found that the morphology, composition and size of Au-Pt NPs are highly dependent on the reaction conditions including the addition sequence of the precursors, and the concentrations of Fe(ii) ions, Au(iii) ions and Pt(ii) ions. In addition, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts (USCS Au38.4@Au9.3Pt52.3 NPs loaded on the Vulcan XC-72R carbon black) exhibit excellent electrocatalytic performance towards the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) in acidic media due to the higher electrochemically active surface area (ECSA) and electronic effect between Pt and Au. For instance, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts exhibited greatly enhanced HER activity in terms of overpotential (16 mV at a current density of -10 mA cm-2) and are better than commercial Pt/C catalysts (31 mV at a current density of -10 mA cm-2) reported in the literature thus far, to the best of our knowledge. Strikingly, their mass activity is about 13.1-fold higher than that of commercial Pt/C catalysts. Moreover, they also show an improved ORR activity, Eonset = 1.015 V and E1/2 = 0.896 V, which are positively shifted by nearly 28 mV and 21 mV than those of commercial Pt/C catalysts (0.987 V and 0.875 V), respectively. In addition, they also showed a higher kinetic current density (12.85 mA cm-2 at 0.85 V) and a better long-term durability. Our synthetic strategy presented here may be extended to the preparation of ultra-small Au-based bimetallic or multi-metallic NPs.

Cubic-like PtCuRu Nanocrystals with High Activity and Stability for Methanol Electro-oxidation

Porous cubic-like PtCu and PtCuRu nanocrystals, which had a similar porous three-dimensional structure, were successfully prepared via the one-pot method. During the growth of the nanocrystals, cetyltrimethylammonium chloride and ascorbic acid were employed as the structure director and assistant reducing agent, respectively. The structure and possible formation of the nanocrystals were investigated. It is worth mentioning that the PtCuRu nanocrystals demonstrated a much better methanol electro-oxidation ability and ultrahigh stability, which displayed 3.4- and 3-fold higher specific and mass activity, respectively, than the commercial Pt/C. The advantage of PtCuRu nanocrystals was possibly ascribed to the synergistic effect of Cu and the porous structure and, more importantly, the presence of Ru that could more efficiently eliminate the harmful intermediates.

Development of luminescent atacamite nanoclusters for bioimaging and photothermal applications

Fluorescent atacamite nanoclusters (FANCs) have been developed and modified with silica for Drosophila salivary gland tissue imaging and photothermally induced cell death of osteosarcoma MG-63 cells. FANCs were synthesized with Moringa oleifera leaf extract without using any hazardous reducing and external capping agents. FANC was further used to evaluate light absorption, fluorescence emission, band gap, and magnetic properties as the first report on such nanoclusters. Upon excitation with a 350 nm light source, FANCs exhibited fluorescence at 460 nm, with a relative quantum yield of 0.3%. Besides, silica-encapsulated fluorescent atacamite nanoclusters (SEFANC) manifested remarkable improvement in emission, quantum yield (1.7%), shelf-life (15 d), biocompatibility, and photostability. Concomitantly, it has also increased the absorption in the near-infrared region and demonstrated high heat generation potential (42 °C → 50 °C). The above results suggest that FANC can be a potential candidate in the area of nanomedicine for a number of applications such as bioimaging, photothermal therapy, etc.

A robust and efficient aqueous electrochemiluminescence emitter constructed by sulfonate porphyrin-based metal-organic frameworks and its application in ascorbic acid detection

The robust and strong electrochemiluminescence (ECL) emission of organic emitters in an aqueous solution is crucial for expanding their applications in early diagnosis. Herein, a Zn porphyrin-based metal-organic framework ((Zn)porphMOF) was facilely obtained by chelating Zn(ii)meso-tetra (4-sulfonatophenyl) porphine (Zn-TSPP) with Zn ions, showing substantially enhanced ECL radiation with K₂S₂O₈ as the coreactant via the "reduction-oxidation" route in aqueous media. In contrast with Zn-TSPP, (Zn)porphMOF displayed 22-fold increase in the ECL intensity because of the agglomeration effect. By virtue of the dramatic confinement towards the energy and electron transfer of ascorbic acid (AA) during the ECL process, an ultrasensitive biosensor was developed with a wide linear range (3.77 to 26.4 μM) and ultra-low detection limit of 0.29 μM at 3 times of the signal-to-noise ratio (3S/N). This work offers a feasible avenue to harvest the steady and boosted ECL responses of organic molecules in aqueous media, also greatly expanding the MOF applications in bioanalysis.

Silver molybdate nanoparticles based immunosensor for the non-invasive detection of Interleukin-8 biomarker

In this study, we report the silver molybdate nanoparticles (β-Ag₂MoO₄ NPs) based non-invasive and sensitive electrochemical immunosensor for label-free detection of Interleukin-8 (IL-8) biomarker. The X-ray diffraction and Raman spectroscopy studies confirm the cubic spinel structures of β-Ag₂MoO₄ NPs. High-resolution transmission electron microscopy study depicted average size of β-Ag₂MoO₄ NPs as 27.15 nm. The cleaned indium tin oxide coated glass substrates were coated with spin-coated thin films of Ag₂MoO₄ NPs. These electrodes used for covalently immobilization of antibodies specific to IL-8 (Anti-IL-8) using EDC-NHS chemistry and unbound activated sites blocked by bovine serum albumin. Electrochemical response was obtained in the range of 1 fg mL^-1 to 40 ng mL^-1 and the sensitivity was found to be 7.03 μA ng^-1mL cm^-2 with LOD of 90 pg mL^-1. Spiked samples prepared by human saliva were tested and found efficient detection with this immunoelectrode.

Highly Enhanced Electrochemiluminescence Luminophore Generated by Zeolitic Imidazole Framework-8-Linked Porphyrin and Its Application for Thrombin Detection

Novel and distinct enhancement in electrochemiluminescence (ECL) signals of advanced organic luminophores are of importance for expanding their applications in early diagnosis. This work reported the construction of an ultrasensitive label-free ECL aptasensor for thrombin (TB) detection by grafting zinc proto-porphyrin IX (ZnP) onto an aminated zeolitic imidazole framework-8 (defined as ZnP-NH-ZIF-8 for clarity) as the luminophore. The structure and optical properties of the resulting ZnP-NH-ZIF-8 were carefully characterized. For that, there appeared to be weak ECL radiation for ZnP in dichloromethane (DCM) containing tetra-n-butylammonium perchlorate (TBAP) because of the as-formed singlet-state oxygen via the "reduction-oxidation" route. More notably, the ECL signals display 153-times enhancement for ZnP-NH-ZIF-8, thanks to the excellent catalytic kinetics for the oxygen reduction reaction (ORR). By virtue of the specific interactions of the TB aptamer (TBA) with the TB protein and the highly efficient catalysis of the ZnP-NH-ZIF-8 for ORR, the as-prepared aptasensor showed a wider linear range (0.1 fM∼1 pM) and a lower detection limit (ca. 58.6 aM). This work provides some useful guidelines for synthesis of an advanced organic luminophore with largely boosted ECL signals in ultrasensitive analysis and clinical diagnosis.

Nanoscale engineering of porous Fe-doped Pd nanosheet assemblies for efficient methanol and ethanol electrocatalyses

Although great successes have been accomplished on the controlled synthesis of 2D and 3D Pd-containing nanomaterials, tapping into the novel Pd-containing electrocatalysts that combined the advantages of both 2D and 3D structures remains a significant challenge. Here, an approach to systematically produce porous Fe-doped Pd nanosheet assemblies (NSAs) with a geometry tuning from PdFe hollow nanospheres (HNSs), PdFe nanocages (NCs), to PdFe nanoplates (NPs) is reported. The inherent ultrathin and porous features endow these PdFe catalysts with excellent electrocatalytic performance. As a result, the optimized 3D PdFe NCs show a much-improved methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) activities in comparison with PdFe HNSs, Pd NPs, and commercial Pd/C catalysts. Moreover, these PdFe nanocatalysts also display greatly enhanced electrocatalytic stability, which can endure 500 cycles with negligible activity loss and structural changes. The mechanism investigations reveal that the introduced Fe atom efficiently modulates the electronic structure of Pd, leading to the downshift of the d-band center of Pd, which is beneficial for the adsorption of reactants. Moreover, the porous nanosheet assembly structure can provide rich mass and electron transfer channels, further boosting the improvement of electrocatalytic performance.

Bimetal-organic framework derived Cu(NiCo)2S4/Ni3S4 electrode material with hierarchical hollow heterostructure for high performance energy storage

Rational design of electrical active materials with high performance for energy storage and conversion is of great significance. Herein, Cu(NiCo)₂S₄/Ni₃S₄, a three-dimensional (3D) hierarchical hollow heterostructured electrode material, is designed by etching the well-defined bimetal organic framework (MOF) via sequential in-situ ion-exchange processes. This trimetallic sulfides with unique structure provide large surface area, hierarchical pore distribution and enhanced electrical conductivity, can enrich the active sites for redox reactions, facilitate electrolyte penetration and rapid charge transfer kinetics. As a result, the Cu(NiCo)₂S₄/Ni₃S₄ electrode exhibits a high specific capacitance of 1320 F/g at 1 A/g and excellent rate performance (only 15% of capacitance is attenuated when the current density is increased by 20 times). Furthermore, a fabricated hybrid supercapacitor of Cu(NiCo)₂S₄/Ni₃S₄/AC can deliver a maximum energy density of 40.8 Wh/kg, remarkable power density of 7859.2 W/kg and superior cycling stability (85% retention of capacitance after 5000 cycles), demonstrating great potential for practical applications in energy storage and conversion devices.