Meso-architectured siliceous hollow quasi-capsule

Neural-based modeling adsorption capacity of metal organic framework materials with application in wastewater treatment

We developed a computational-based model for simulating adsorption capacity of a novel layered double hydroxide (LDH) and metal organic framework (MOF) nanocomposite in separation of ions including Pb(II) and Cd(II) from aqueous solutions. The simulated adsorbent was a composite of UiO-66-(Zr)-(COOH)2 MOF grown onto the surface of functionalized Ni50-Co50-LDH sheets. This novel adsorbent showed high surface area for adsorption capacity, and was chosen to develop the model for study of ions removal using this adsorbent. A number of measured data was collected and used in the simulations via the artificial intelligence technique. Artificial neural network (ANN) technique was used for simulation of the data in which ion type and initial concentration of the ions in the feed was selected as the input variables to the neural network. The neural network was trained using the input data for simulation of the adsorption capacity. Two hidden layers with activation functions in form of linear and non-linear were designed for the construction of artificial neural network. The model's training and validation revealed high accuracy with statistical parameters of R2 equal to 0.99 for the fitting data. The trained ANN modeling showed that increasing the initial content of Pb(II) and Cd(II) ions led to a significant increment in the adsorption capacity (Qe) and Cd(II) had higher adsorption due to its strong interaction with the adsorbent surface. The neural model indicated superior predictive capability in simulation of the obtained data for removal of Pb(II) and Cd(II) from an aqueous solution.

Metformin functionalized dendritic fibrous nanosilica (KCC-1-nPr-Met) as an innovative and green nanocatalyst for the efficient synthesis of tetrahydro-4H-chromene derivatives

An innovative nanocatalyst (KCC-1-nPr-Met) has been prepared from the covalent attachment of metformin on the channels and the pores of n-propyl amine functionalized dendritic fibrous nanosilica (DFNS) and used towards efficient, green, and high yield synthesis of tetrahydro-4H-chromenes derivatives by one-pot three-component reaction of aromatic aldehydes, malononitrile, and dimedone in H₂ O-EtOH at room temperature. The designed nanocatalyst has been characterized by energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), and adsorption/desorption analysis (BET) techniques. Also, field emission scanning electron microscopy (FE-SEM) was used to study the morphology of prepared nanocatalyst. The engineered nanocatalyst with uniform fibrous spheres has dendritic structure, high pore volume (0.35 cm³ /g), and great surface area (178 m² /g). Hence, the specific dendritic structure of the prepared nanocatalyst not only improve the diffusion ability of the reactants and products, but also, increase the availability of dynamic sites in the pores and channels of the catalyst. According to the obtained results, a unique strategy was proposed towards the synthesis of important biologically active scaffolds in the presence of nontoxic and environmental friendly nanocatalyst and media. Milder reaction conditions (room temperature), shorter reaction times (5-30 minutes), excellent yields (92%-98%) of the products with higher purity, very simple workup procedure, and using of EtOH: H₂ O as a green solvent are the advantages of the presented work.

Molecular separation of ions from aqueous solutions using modified nanocomposites

Herein, two novel porous polymer matrix nanocomposites were synthesized and used as adsorbents for heavy metal uptake. Methacrylate-modified large mesoporous silica FDU-12 was incorporated in poly(methyl methacrylate) matrix through an in-situ polymerization approach. For another, amine-modified FDU-12 was composited with Nylon 6,6 via a facile solution blending protocol. Various characterization techniques including small-angle X-ray scattering, FTIR spectroscopy, field emission-scanning electron microscopy, transmission electron microscopy, porosimetry, and thermogravimetric analysis have been applied to investigate the physical and chemical properties of the prepared materials. The adsorption of Pb(II) onto the synthesized nanocomposites was studied in a batch system. After study the effect of solution pH, adsorbent amount, contact time, and initial concentration of metal ion on the adsorption process, kinetic studies were also conducted. For both adsorbents, the Langmuir and pseudo-second-order models were found to be the best fit to predict isotherm and kinetics of adsorption. Based on the Langmuir model, maximum adsorption capacities of 105.3 and 109.9 mg g-1 were obtained for methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6,6, respectively.

Synthesis of novel adsorbent based on tetrasulfide-functionalized fibrous silica KCC-1 for removal of Hg(II) cations

Hg(II) has been identified to be one of the extremely toxic heavy metals because of its hazardous effects and this fact that it is even more hazardous to animals than other pollutants such as Ag, Au, Cd, Ni, Pb, Co, Cu, and Zn. Accordingly, for the first time, tetrasulfide-functionalized fibrous silica KCC-1 (TS-KCC-1) spheres were synthesized by a facile, conventional ultrasonic-assisted, sol–gel-hydrothermal preparation approach to adsorb Hg(II) from aqueous solution. Tetrasulfide groups (–S–S–S–S–) were chosen as binding sites due to the strong and effective interaction of mercury ions (Hg(II)) with sulfur atoms. Hg(II) uptake onto TS-KCC-1 in a batch system has been carried out. Isotherm and kinetic results showed a very agreed agreement with Langmuir and pseudo-first-order models, respectively, with a Langmuir maximum uptake capacity of 132.55 mg g^–1 (volume of the solution = 20.0 mL; adsorbent dose = 5.0 mg; pH = 5.0; temperature: 198 K; contact time = 40 min; shaking speed = 180 rpm). TS-KCC-1was shown to be a promising functional nanoporous material for the uptake of Hg(II) cations from aqueous media. To the best of our knowledge, there has been no report on the uptake of toxic Hg(II) cations by tetrasulfide-functionalized KCC-1 prepared by a conventional ultrasonic-assisted sol–gel-hydrothermal synthesis method.

Facile synthesis of the crescent-like SnS nanocrystals capped by polyvinyl pyrrolidone and its performance of adsorbing dyes

With using Sn²⁺ as tin source, l-cysteine as sulphur source and polyvinyl pyrrolidone (PVP, M_w = 1300000) as surfactant, a novel three-dimensional and crescent-like SnS nanocrystal (NCs) was successfully synthesized in a one-pot hydrothermal method. The as-prepared SnS NCs displayed uniform crescent-like morphological structure, and demonstrated excellent efficiency for the adsorption of cationic dyes such as rhodamine B (RhB) and methylene blue (MB). Kinetic analysis indicated that the adsorption process followed the pseudo second-order model, and the maximum capacity of the SnS NCs to adsorb MB was determined by Langmuir equation to be 252 mg⋅g^-1 at 298 K. The pH dependence of SnS NCs on the adsorption of cationic dyes and the characterization of zeta potential jointly suggested the existence of electrostatic attraction in the process. Overall, this study showed that electrostatic field of functional groups and the capping of PVP could significantly enhance the adsorption performance of the SnS NCs, and also provides a novel insight into the development of highly efficient inorganic adsorbents for cationic dyes.

Extraction of ingredients from tea leaves using oxidative enzymatic reaction and optimization of extraction conditions

Peroxidase (POD) and polyphenol oxidase (PPO) are used as biocatalyst in many processes such as oxidization reactions, wastewater treatment, phenol synthesis and so on. The purpose of current study is enzymes extraction from biomass (tea leaves) as well as evaluation of their activation. Different parameters including temperature, buffer concentration, buffer type, buffer/tea leaves ratio, addition of high molecular weight polymers and emulsifiers, and pH were optimized in order to obtain the highest enzymes activity. Response Surface Methodology (RSM) procedure is employed for statistical analysis of enzymes extraction. It is understood from the result that PPO and POD possess the highest activity at temperatures of 25 °C and 50 °C, pH 7 and 5, buffer molarity of 0.1, and 0.05, buffer/tea leaves ratio = 5 for both, contact time = 20 min and 10 min, and presence of 6% and 3% PVP, 5% and 0% Tween 80 for PPO and POD, respectively. Amounts of highest activity for PPO and POD biocatalysts were calculated 0.42 U/mL and 0.025493 U/mL, respectively. Moreover, the entire inactivation of PPO took place after 30 min at 40 °C and 60 °C and 20 min at 80 °C. However, POD lost 35% of its activity after 30 min at 40 °C and 60 °C. The amount of 6% POD activity was kept after 45 min at 80 °C. Generally, it was indicated that POD was more resistant to thermal treatment than PPO.

Synthesis of multi-organo-functionalized fibrous silica KCC-1 for highly efficient adsorption of acid fuchsine and acid orange II from aqueous solution

Multi-functionalized fibrous silica KCC-1 (MF-KCC-1) bearing amine, tetrasulfide, and thiol groups was synthesized via a post-functionalization method and fully characterized by several methods such as FTIR, FESEM, EDX-Mapping, TEM, and N₂ adsorption-desorption techniques. Due to abundant surface functional groups, accessible active adsorption sites, high surface area (572 m² g^-1), large pore volume (0.98 cm³ g^-1), and unique fibrous structure, mesoporous MF-KCC-1 was used as a potential adsorbent for the uptake of acid fuchsine (AF) and acid orange II (AO) from water. Different adsorption factors such as pH of the dye solution, the amount of adsorbent, initial dye concentration, and contact time, affecting the uptake process were optimized and isotherm and kinetic studies were conducted to find the possible mechanism involved in the process. For both AF and AO dyes, the Langmuir isotherm model and the PFO kinetic model show the most agreement with the experimental data. According to the Langmuir isotherm, the calculated maximum adsorption capacity for AF and AO were found to be 574.5 mg g^-1 and 605.9 mg g^-1, respectively, surpassing most adsorption capacities reported until now which is indicative of the high potential of mesoporous MF-KCC-1 as an adsorbent for removal applications.

Study on novel modified large mesoporous silica FDU-12/polymer matrix nanocomposites for adsorption of Pb(II)

In this study, porous methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6 nanocomposites were synthesized via a facile solution casting protocol. The physicochemical properties of the prepared materials were studied using various characterization techniques including Fourier transform-infrared spectroscopy, field emission-scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption/desorption. After characterization of the materials, the prepared nanocomposites were applied as novel adsorbents for the removal of Pb(II) from aqueous media. In this regard, the effect of various parameters including solution pH, adsorbent amount, contact time, and initial concentration of Pb(II) on the adsorption process was investigated. To study the mechanism of adsorption, kinetic studies were conducted. The kinetic models of pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion were employed. The results revealed that the adsorption of Pb(II) onto methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6 adsorbents followed the pseudo-second-order kinetic model. Also, different isotherms including Langmuir, Freundlich, and Dubinin-Radushkevich were applied to evaluate the equilibrium adsorption data. Langmuir isotherm provided the best fit with the equilibrium data of both adsorbents with maximum adsorption capacities of 99.0 and 94.3 mg g-1 for methacrylate-modified FDU-12/poly(methyl methacrylate) and amine-modified FDU-12/Nylon 6, respectively, for the removal of Pb(II).

Synthesis, molecular dynamics simulation and adsorption study of different pollutants on functionalized mesosilica

Experimental and computational works were carried out on a new type of mesoporous silica. In the experimental section, functionalized hollow mesosilica spheres were prepared via a facile technique and then evaluated using some analytical techniques (FESEM, TEM, L-XRD, FTIR, BET-BJH, and TGA). The obtained results revealed that the synthesized material had hollow structure with a diamino-grafted porous shell. The molecular separation of crystal Violet (CV) and neutral Red (NR) dyes from water were investigated by adsorption process using the synthesized powder. Influence of adsorbent loading was evaluated as adsorption ability and dyes removal efficiency. Also, the obtained modeling results revealed appropriate fitting of data with non-linear Langmuir model. The theoretical studies were employed to study the adsorption and removal mechanism of cationic (CV and NR) and anionic (orange II (OII)) dyes using molecular dynamics calculations. Moreover, the simulation outcomes provided valuable information about quantum chemical properties including the HOMO-LUMO maps, chemical reactivity, global softness (σ) and hardness (η) for silica-linker-water-dyes components.

A novel and facile green synthesis method to prepare LDH/MOF nanocomposite for removal of Cd(II) and Pb(II)

To date, many nanoadsorbents have been developed and used to eliminate heavy metal contamination, however, one of the challenges ahead is the preparation of adsorbents from processes in which toxic organic solvents are used in the least possible amount. Herein, we have developed a new carboxylic acid-functionalized layered double hydroxide/metal-organic framework nanocomposite (LDH/MOF NC) using a simple, effective, and green in situ method. UiO-66-(Zr)-(COOH)₂ MOF nanocrystals were grown uniformly over the whole surface of COOH-functionalized Ni₅₀Co₅₀-LDH ultrathin nanosheets in a green water system under a normal solvothermal condition at 100 °C. The synthesized LDH/MOF NC was used as a potential adsorbent for removal of toxic Cd(II) and Pb(II) from water and the influence of important factors on the adsorption process was monitored. Various non-linear isotherm and kinetic models were used to find plausible mechanisms involved in the adsorption, and it was found that the Langmuir and pseudo-first-order models show the best agreement with isotherm and kinetic data, respectively. The calculated maximum adsorption capacities of Cd(II) and Pb(II) by the LDH/MOF NC were found to be 415.3 and 301.4 mg g^-1, respectively, based on the Langmuir model (pH = 5.0, adsorbent dose = 0.02 g, solution volume = 20 mL, contact time = 120 min, temperature = 25 ℃, shaking speed 200 rpm).

Controlled release evaluation of paracetamol loaded amine functionalized mesoporous silica KCC1 compared to microcrystalline cellulose based tablets

In the pharmaceutical manufacturing, drug release behavior development is remained as one of the main challenges to improve the drug effectiveness. Recently, more focus has been done on using mesoporous silica materials as drug carriers for prolonged and superior control of drug release in human body. In this study, release behavior of paracetamol is developed using drug-loaded KCC-1-NH2 mesoporous silica, based on direct compaction method for preparation of tablets. The purpose of this study is to investigate the utilizing of pure KCC-1 mesoporous silica (KCC-1) and amino functionalized KCC-1 (KCC-1-NH2) as drug carriers in oral solid dosage formulations compared to common excipient, microcrystalline cellulose (MCC), to improve the control of drug release rate by manipulating surface chemistry of the carrier. Different formulations of KCC-1 and KCC-NH2 are designed to investigate the effect of functionalized mesoporous silica as carrier on drug controlled-release rate. The results displayed the remarkable effect of KCC-1-NH2 on drug controlled-release in comparison with the formulation containing pure KCC-1 and formulation including MCC as reference materials. The pure KCC-1 and KCC-1-NH2 are characterized using different evaluation methods such as FTIR, SEM, TEM and N2 adsorption analysis.

Computational modeling of drug separation from aqueous solutions using octanol organic solution in membranes

Continuous membrane separation of pharmaceuticals from an aqueous feed was studied theoretically by development of high-performance mechanistic model. The model was developed based on mass and momentum transfer to predict separation and removal of ibuprofen (IP) and its metabolite compound, i.e. 4-isobutylacetophenone (4-IBAP) from aqueous solution. The modeling study was carried out for a membrane contactor considering mass transport of solute from feed to organic solvent (octanol solution). The solute experiences different mass transfer resistances during the removal in membrane system which were all taken into account in the modeling. The model’s equations were solved using computational fluid dynamic technique, and the simulations were carried out to understand the effect of process parameters, flow pattern, and membrane properties on the removal of both solutes. The simulation results indicated that IP and 4-IBAP can be effectively removed from aqueous feed by adjusting the process parameters and flow pattern. More removal was obtained when the feed flows in the shell side of membrane system due to improving mass transfer. Also, feed flow rate was indicated to be the most affecting process parameter, and the highest solute removal was obtained at the lowest feed flow rate.

Process Design of Ammonia Separation for Nitrification Control in Aeration Basins at an IKORC's Oily Wastewater Treatment Unit

In the current decades, water shortage is well understood as one of the main limiting factors for oil industry development all over the world. One of the available and reasonable solutions is reusing wastewater. The oily wastewater treatment unit of the IKORC oil refinery provides a portion of the makeup water for cooling towers, applying physical, biological, and chemical treatments. Ammonia shocks are the only crisis that disrupts the nitrification process. This condition eventuates in destroying the microorganisms of aeration basins and leads to a high ammonia containing effluent. In order to protect the aeration process, it is mandatory to apply a suitable system for removing excess ammonia. In this study, at first, ammonia removal history is reviewed. Then quantity and quality of the oily sewer are investigated. Because of high volatility of ammonia contamination and high TDS, a stripping tower with air is selected among diverse solutions. Taking into account the principles of project econometrics, operating parameters such as stripping factor, pressure drop, tower volumetric flow rate, and number of towers are determined. Then, the process is designed and its environmental survey is conducted. Finally, calculating indices proved that this project is economically profitable in addition to its environmental benefits.

Hierarchical multi-shell hollow micro-meso-macroporous silica for Cr(VI) adsorption

The development of easier, cheaper, and more effective synthetic strategies for hierarchical multimodal porous materials and multi-shell hollow spheres remains a challenging topic to utilize them as adsorbents in environmental applications. Here, the hierarchical architecture of multi-shell hollow micro–meso–macroporous silica with pollen-like morphology (MS-HMS-PL) has been successfully synthesized via a facile soft-templating approach and characterized for the first time. MS-HMS-PL sub-microspheres showed a trimodal hierarchical pore architecture with a high surface area of 414.5 m² g⁻¹, surpassing most of the previously reported multishelled hollow nanomaterials. Due to its facile preparation route and good physicochemical properties, MS-HMS-PL could be a potential candidate material in water purification, catalysis, and drug delivery. To investigate the applicability of MS-HMS-PL as an adsorbent, its adsorption performance for Cr(VI) in water was evaluated. Important adsorption factors affecting the adsorption capacity of adsorbent were systematically studied and Kinetics, isotherms, and thermodynamics parameters were computed via the non-linear fitting technique. The maximum capacity of adsorption computed from the Langmuir isotherm equation for Cr(VI) on MS-HMS-PL was 257.67 mg g⁻¹ at 293 K and optimum conditions (pH 4.0, adsorbent dosage 5.0 mg, and contact time 90 min).

A hierarchical LDH/MOF nanocomposite: single, simultaneous and consecutive adsorption of a reactive dye and Cr(vi)

The design and development of an environmentally benign porous adsorbent for effective simultaneous adsorption of organic dyes and heavy metals from water are important but remain a big challenge. Herein, we have designed a layered double hydroxide/metal-organic framework-based hierarchical nanocomposite (LDH/MOF HNC) by a facile, room-temperature in situ approach. This paper for the first time reports a hierarchical trimodal micro-meso-macroporous LDH/MOF composite with a high surface area (surface area 1282 m2 g-1 and pore volume 0.93 cm3 g-1), synthesised by uniformly growing MOF nanocrystals on the surface of LDH nanosheet ultrathin films. An attempt is made to quantitatively demonstrate the adsorption data via suitable nonlinear kinetic and isotherm equations for single, simultaneous, and consecutive adsorption of the orange II reactive dye and Cr(vi). Experiments were performed at various values of pH (6.0-11.0), adsorbent dosages (1.0-8.0 mg), adsorbate concentrations (5-500 mg L-1), and temperatures (293-323 K). The Langmuir model revealed a satisfactory fit to the equilibrium data of the LDH/MOF HNC (correlation coefficients R2 > 0.98) with a calculated maximum adsorption capacity of 1173 and 733 mg g-1 for orange II and Cr(vi), respectively, in a simultaneous adsorption system. The results of the study demonstrated that LDH/MOF HNCs could potentially be applied as a promising nanoadsorbent for the simultaneous removal and extraction of toxic dyes and metals from water.