A facile synthesis for uniform tablet-like TiO2/C derived from Materials of Institut Lavoisier-125(Ti) (MIL-125(Ti)) and their enhanced visible light-driven photodegradation of tetracycline

Tuning strategies of MIL metal organic frameworks for adsorptive removal of formaldehyde in air

Materials Institute Lavoisier (MIL) metal organic frameworks (MOFs) are known for their potential to adsorb gaseous organic pollutants. This study explores the synergistic effects between the selection of central metals (e.g., titanium, iron, and aluminum) and the incorporation of -NH2 groups in terms of adsorption efficiency against gaseous formaldehyde (FA). A group of the pristine MIL MOFs is synthesized using three different metals (i.e., titanium, iron, and aluminum) and terephthalic acid along with their NH2 derivatives using 2-aminoterephthalic acid. Among the pristine forms, MIL-125(Ti) achieves the highest FA adsorption capacity (Q) of 26.96 mg g-1 and a partition coefficient (PC) of 0.0898 mol kg-1 Pa-1. Further, amination significantly improves the FA adsorption potential of NH2-MIL-125(Ti) with a Q value of 91.22 mg g-1 (PC = 0.3038 mol kg-1 Pa-1). In situ diffuse reflectance infrared Fourier-transform spectroscopy reveals that the FA adsorption of plain MILs should be governed primarily by physisorption. In contrast, FA adsorption of NH2-MILs appears to be regulated by both physisorption and chemisorption, while the latter being affected mainly through FA-NH2 interactions (Schiff base reactions). These findings provide valuable insights into the utility of aminated MIL sorbents, possibly toward the efficient management of indoor air quality.

Synergistic effects of oxygen vacancies and mesoporous structures in amorphous C@TiO2 for photocatalytic CO2 reduction

In this study, the theoretical calculations proves that the combination of oxygen vacancy and amorphous carbon films in TiO2 (VO-CT) can effectively reduce the energy bandgap and work function. The minimum Gibbs free energies required for the CO2RR reaction of VO-CT are 0.20 eV, which is lower than pure TiO2. The amorphous c@TiO2 nanomaterials with oxygen vacancy and mesoporous structures (VO-MCT) are prepared with the P123 surfactant as the template and oxalic acid as an inducer. The electron paramagnetic resonance indicates the presence of abundant oxygen vacancy defects in the samples. UV-vis spectra indicate that the mesoporous structure enhances light absorption capacity. The photocatalytic CO2 reduction tests show that the highest conversion rates for CH4 and CO of VO-MCT are 14 μmol g-1 h-1 and 10.66 μmol g-1 h-1, respectively. The electron consumption rate of VO-MCT is 12.43 times higher than that of commercial TiO2 (P200).

Recent trends in the phytoremediation of radionuclide contamination of soil by cesium and strontium: Sources, mechanisms and methods: A comprehensive review

This comprehensive review examines recent trends in phytoremediation strategies to address soil radionuclide contamination by cesium (Cs) and strontium (Sr). Radionuclide contamination, resulting from natural processes and nuclear-related activities such as accidents and the operation of nuclear facilities, poses significant risks to the environment and human health. Cs and Sr, prominent radionuclides involved in nuclear accidents, exhibit chemical properties that contribute to their toxicity, including easy uptake, high solubility, and long half-lives. Phytoremediation is emerging as a promising and environmentally friendly approach to mitigate radionuclide contamination by exploiting the ability of plants to extract toxic elements from soil and water. This review focuses specifically on the removal of 90Sr and 137Cs, addressing their health risks and environmental implications. Understanding the mechanisms governing plant uptake of radionuclides is critical and is influenced by factors such as plant species, soil texture, and physicochemical properties. Phytoremediation not only addresses immediate contamination challenges but also provides long-term benefits for ecosystem restoration and sustainable development. By improving soil health, biodiversity, and ecosystem resilience, phytoremediation is in line with global sustainability goals and environmental protection initiatives. This review aims to provide insights into effective strategies for mitigating environmental hazards associated with radionuclide contamination and to highlight the importance of phytoremediation in environmental remediation efforts.

Z-scheme heterojunction photocatalyst formed by MOF-derived C-TiO2 and Bi2WO6 for enhancing degradation of oxytetracycline: Mechanistic insights and toxicity evaluation in the presence of a single active species

In the work, Bi2WO6/C-TiO2 photocatalyst was successfully synthesized for the first time by loading narrow bandgap semiconductor Bi2WO6 on MOF-derived carboxyl modified TiO2. The phase structure, morphology, photoelectric properties, surface chemical states and photocatalytic performance of the prepared photocatalysts were systematically investigated using various characterization tools. The degradation efficiency of oxytetracycline by 6BT Z-scheme heterojunction photocatalyst under visible light could reach 93.6 % within 100 min, which was related to the high light harvesting and effective separation and transfer of photo-generated carriers. Furthermore, the effects of various environmental factors in actual wastewater were further investigated, and the results showed that 6BT exhibited good adaptability, durability and resistance to interference. Unlike most works, the degradation system with a different single active species were designed and constructed based on their formation mechanism. In addition, for the first time, a positive study was conducted on the priority attack sites, intermediate products, and degradation pathways for the photocatalytic degradation of oxytetracycline by a single active species through HPLC-MS and Fukui index calculations. The toxicity changes of intermediate products produced in three different single active species oxidation systems were evaluated using toxicity assessment software tools (T.E.S.T.), Escherichia coli growth experiments, and wheat growth experiments. Among them, the intermediate products formed through O2- oxidation had the lowest toxicity and the main active sites it attacked were the 20C, 38O, 18C, 41O, and 55O atoms with high f+ values in the oxytetracycline molecular structure. This work provided the insight into the role of each active species in the degradation of antibiotics and offered new ideas for the design and synthesis of efficient and eco-friendly photocatalysts.

Optimizing Photoelectrochemical UV Imaging Photodetection: Construction of Anatase/Rutile Heterophase Homojunctions and Oxygen Vacancies Engineering in MOF-Derived TiO2

Self-powered photoelectrochemical (PEC) ultraviolet photodetectors (UVPDs) are promising for next-generation energy-saving and highly integrated optoelectronic systems. Constructing a heterojunction is an effective strategy to increase the photodetection performance of PEC UVPDs because it can promote the separation and transfer of photogenerated carriers. However, both crystal defects and lattice mismatch lead to deteriorated device performance. Here, we introduce a structural regulation strategy to prepare TiO2 anatase-rutile heterophase homojunctions (A-R HHs) with oxygen vacancies (OVs) photoanodes through an in situ topological transformation of titanium metal-organic framework (Ti-MOF) by pyrolysis treatment. The cooperative interaction between A-R HHs and OVs suppresses carrier recombination and accelerates carrier transport, thereby significantly enhancing the photodetection performance of PEC UVPDs. The obtained device realizes a high on/off ratio of 10,752, a remarkable responsivity of 24.15 mA W-1, an impressive detectivity of 3.28 × 1011 Jones, and excellent cycling stability. More importantly, under 365 nm light illumination, a high-resolution image of "HUST" (the abbreviation of Harbin University of Science and Technology) was obtained perfectly, confirming the excellent optical imaging capability of the device. This research not only presents an advanced methodology for constructing TiO2-based PEC UVPDs, but also provides strategic guidance for enhancing their performance and practical applications.

Using NH2-MIL-125(Ti) for efficient removal of Cr(VI) and RhB from aqueous solutions: Competitive and cooperative behavior in the binary system

The coexistence of inorganic and organic contaminants is a challenge for real-life water treatment applications. Therefore, in this research, we used NH2-MIL-125(Ti) to evaluate the single adsorption of hexavalent chromium (Cr(VI)) or Rhodamine B (RhB) in an aqueous solution and further investigate simultaneous adsorption experiments to compare the adsorption behavior changes. The main influencing factors, for example, reaction time, initial concentration, reaction temperature, and pH were studied in detail. In all reaction systems, the pseudo-second-order kinetic and Langmuir isotherm models were well illuminated the adsorption progress of Cr(VI) and RhB. Thermodynamic studies showed that the adsorption process was spontaneous and endothermic. As compared to the single system, the adsorption capacity of Cr(VI) in the binary system gradually decreased as the additive amount of RhB increased, whereas the adsorption capacity of RhB in the binary system was expanded brilliantly. When the binary reaction system contained 100 mg/L Cr(VI), the removal rate of RhB increased to 97.58%. The formation of Cr(VI)-RhB and Cr(III)-RhB complexes was the cause that provided facilitation for the adsorption of RhB. These findings prove that the interactions during the water treatment process between contaminants may obtain additional benefits, contributing to a better adsorption capacity of co-existing contaminant.

Perspective into ion storage of pristine metal-organic frameworks in capacitive deionization

Metal-organic frameworks (MOFs), featuring tunable conductivity, tailored pore/structure and high surface area, have emerged as promising electrode nanomaterials for ion storage in capacitive deionization (CDI) and garnered tremendous attention in recent years. Despite the many advantages, the perspective from which MOFs should be designed and prepared for use as CDI electrode materials still faces various challenges that hinder their practical application. This summary proposes design principles for the pore size, pore environment, structure and dimensions of MOFs to precisely tailor the surface area, selectivity, conductivity, and Faradaic activity of electrode materials based on the ion storage mechanism in the CDI process. The account provides a new perspective to deepen the understanding of the fundamental issues of MOFs electrode materials to further meet the practical applications of CDI.

Biomass derived reduced-graphene-oxide supported α-Fe2O3/ZnO S-scheme heterostructure: Robust photocatalytic wastewater remediation

The emergence of new diseases and the unplanned industrialization of cities have led to new diseases and the subsequent use of antibiotics. Hence the remediation of wastewater containing antibiotics and their severe pollution has raised serious concerns in recent years. Herein coral-shaped α-Fe₂O₃/ZnO/reduced graphene oxide (r-GO)-like carbon heterojunction in-situ were prepared from basil seed as a sustainable biomass resource and applied for the photodegradation of the oxytetracycline (OTC) as a typical antibiotic in a helical plug flow photoreactor (HPFPR) via persulfate activation under visible light irradiation. Spectroscopy and electrochemical results confirmed the tunable band structure and quick light absorption, superior charge separation and transfer, satisfactory charge carrier lifetime, and long-term stability for the prepared photocatalyst. The 98% degradation efficiency was achieved for OTC within 90 min fitted by a first-order kinetic model with the rate constant of 0.1248 min^-1. The finding proves that HPFPR exhibited a higher degradation rate of OTC by 2.3 times compared to the batch reactor. The 3D computational fluid dynamics (CFD) model confirmed the outstanding performance of the HPFPR. Scavenging experiments integrated with mott Schottky and DRS results revealed that rGO intensifies the S-scheme charge carrier transfer and built-in electric field and reduces the recombination. Finally, this work has substantial potential for the in-situ synthesis of environmental-friendly and large-scale metal oxide heterojunctions in natural carbon supports as well as scale-up and gives novel insights from molecular and engineering points of view into the wastewater remediation processes and clean water production.

Ligands engineering of gold nanoclusters with enhanced photoluminescence for deceptive information encryption and glutathione detection

Gold nanoclusters (Au NCs) have appeared as an essential alternative to traditional quantum dots and fluorescent molecules for the development of intelligent stimuli-responsive photoluminescence (PL), but the low PL emission of Au NCs restricts their broad applications. Herein, we reported a simple yet effective strategy for preparing Au NCs with high PL by ligands engineering of 4-hydroxy-2-mercapto-6-methylpyrimidine (MTU) and L-Arginine (Arg). Owing to the rigidified shell and the ligand-to-metal charge transfer (LMCT) effects, it was found that the assembly of Arg ligand on MTU-protected Au NCs (Arg/MTU-Au NCs) led to a significantly enhanced PL in the alkaline solution up to 30 times. Moreover, utilizing the tunable LMCT, the Arg/MTU-Au NCs displayed rapid responses to multi-type ionic interaction in a reversible manner, such as H+/OH- and Cu2+/glutathione (GSH) pairs. Inspired by these intriguing ions-responsive LMCT and the associated switchable PL emission, the Arg/MTU-Au NCs were successfully used as excellent stimuli-responsive PL probes for intriguing deceptive information encryption and biosensing as well. This work would provide new insight into regulating the PL emission of Au NCs by ligands engineering and advance their potential applications in information encryption and bioassay.

In Situ Growth Intercalation Structure MXene@Anatase/Rutile TiO2 Ternary Heterojunction with Excellent Phosphoprotein Detection in Sweat

Abnormal protein phosphorylation may relate to diseases such as Alzheimer's, schizophrenia, and Parkinson's. Therefore, the real-time detection of phosphoproteins in sweat was of great significance for the early knowledge, detection, and treatment of neurological diseases. In this work, anatase/rutile TiO₂ was in situ grown on the MXene surface to constructing the intercalation structure MXene@anatase/rutile TiO₂ ternary heterostructure as a sensing platform for detecting phosphoprotein in sweat. Here, the intercalation structure of MXene acted as electron and diffusion channels for phosphoproteins. The in situ grown anatase/rutile TiO₂ with n-n-type heterostructure provided specific adsorption sites for the phosphoproteins. The determination of phosphoprotein covered concentrations in sweat, with linear range from 0.01 to 1 mg/mL, along with a low LOD of 1.52 μM. It is worth noting that, since the macromolecular phosphoprotein was adsorbed on the surface of the material, the electrochemical signal gradually decreased with the increase of phosphoprotein concentration. In addition, the active sites in the MXene@anatase/rutile TiO₂ ternary heterojunction and synergistic effect of the heterojunction were verified by first-principle calculations to further realize the response to phosphoproteins. Additionally, the effective diffusion capacity and mobility of phosphoprotein molecules in the ternary heterojunction structure were studied by molecular dynamics simulation. Furthermore, the constructed sensing platform showed high selectivity, repeatability, reproducibility, and stability, and this newly developed sensor can detect for phosphoprotein in actual sweat samples. This satisfactory sensing strategy could be promoted to realize the noninvasive and continuous detection of sweat.

Removal efficiency of As(III) from aqueous solutions using natural and Fe(III) modified bentonites

Contamination of water with arsenic is a major global health problem. The use of adsorbent materials for the removal of As from aqueous systems is a plausible solution to this problem. In this work, the use of commercial bentonites (purified and modified with iron (III)) for the removal of As from water was studied. The samples were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier Transformed Infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and nitrogen adsorption/desorption isotherms to determine their physicochemical properties. The arsenic removal capacities of adsorbent materials were studied from 1 mg/L solutions of As (III) using the colorimetric technique of molybdenum blue. High adsorption capacity (0.33 mg/g) of As (III) was obtained in aqueous systems after 1 h of treatment with unmodified bentonite. The incorporation of iron improved the removal performance in short times. The obtained results could be the starting point for the development of a low-cost filtration system that contributes to solve the problem of arsenic in water.

Visible-Light-Driven Photocatalytic Degradation of Tetracycline Using Heterostructured Cu2O-TiO2 Nanotubes, Kinetics, and Toxicity Evaluation of Degraded Products on Cell Lines

This study first reports on the tetracycline photodegradation with the synthesized heterostructured titanium oxide nanotubes coupled with cuprous oxide photocatalyst. The large surface area and more active sites on TiO₂ nanotubes with a reduced band gap (coupling of Cu₂O) provide faster photodegradation of tetracycline under visible light conditions. Cytotoxicity experiments performed on the RAW 264.7 (mouse macrophage) and THP-1 (human monocytes) cell lines of tetracycline and the photodegraded products of tetracycline as well as quenching experiments were also performed. The effects of different parameters like pH, photocatalyst loading concentration, cuprous oxide concentration, and tetracycline load on the photodegradation rate were investigated. With an enhanced surface area of nanotubes and a reduced band gap of 2.58 eV, 1.5 g/L concentration of 10% C-TAC showed the highest efficiency of visible-light-driven photodegradation (∼100% photodegradation rate in 60 min) of tetracycline at pH 5, 7, and 9. The photodegradation efficiency is not depleted up to five consecutive batch cycles. Quenching experiments confirmed that superoxide radicals and hydroxyl radicals are the most involved reactive species in the photodegradation of tetracycline, while valance band electrons are the least involved reactive species. The cytotoxicity percentage of tetracycline and its degraded products on RAW 264.7 (-0.932) as well as THP-1 (-0.931) showed a negative correlation with the degradation percentage with a p-value of 0.01. The toxicity-free effluent of photodegradation suggests the application of the synthesized photocatalyst in wastewater treatment.

0D/3D NiCo2O4/defected UiO-66 catalysts for enhanced degradation of tetracycline in peroxymonosulfate/simulated sunlight systems: Degradation mechanisms and pathways

Developing synergistic systems and taking environmental risks into account are two necessary aspects of being considered to remove persistent organic pollutants efficiently. Thus, a combined catalytic system uniting the Fenton-like process and simulated solar-light photocatalysis has been constructed. Moreover, a series of NiCo₂O₄/HP-UiO-66 catalysts (yNiCo-DUx) were also fabricated to improve tetracycline (TC) removal efficiency. The NiCo₂O₄ nanoparticles (NPs) and hierarchically porous metal-organic frameworks (HP-MOFs) were synthesised using one-step calcination. The Z-scheme structure of the catalysts was confirmed by ESR, XPS, DRS, time-resolved PL (TR-PL) spectra and the quenching experiments. The NiCo₂O₄ nanoparticles could be embedded and fixed into the defects of the MOF structure, and the leaching of toxic metals was also significantly suppressed. In the optimal reaction condition with 15NiCo-DU50, sunlight, and peroxymonosulfate (PMS), the total removal efficiency of TC could reach 98.5% within 8 min of irradiation, and the highest % RSE could reach 11.2%. Moreover, the corresponding reaction rate was 28.7, 3.6 and 1.3-10.2 times higher than photocatalysis, Fenton-like processes and other catalysts. Furthermore, the possible degradation mechanism, generation of reactive species and PMS excitation pathways were also investigated in depth. The present study sheds light on the fabrication of HP-MOFs based catalysts and the combination of various methods to eliminate organic pollutants.

N-doped CoAl oxides from hydrotalcites with enhanced oxygen vacancies for excellent low-temperature propane oxidation

A series of nitrogen-doped CoAlO (N-CoAlO) were constructed by a hydrothermal route combined with a controllable NH₃ treatment strategy. The effects of NH₃ treatment on the physico-chemical properties and oxidation activities of N-CoAlO catalysts were investigated. In comparison to CoAlO, a smallest content decrease in surface Co³⁺ (serving as active sites) while a largest increased amount of surface Co²⁺ (contributing to oxygen species) are obtained over N-CoAlO/4h among the N-CoAlO catalysts. Meanwhile, a maximum N doping is found over N-CoAlO/4h. As a result, N-CoAlO/4h (under NH₃ treatment at 400°C for 4 hr) with rich oxygen vacancies shows optimal catalytic activity, with a T₉₀ (the temperature required to reach a 90% conversion of propane) at 266°C. The more oxygen vacancies are caused by the co-operative effects of N doping and suitable reduction of Co³⁺ for N-CoAlO/4h, leading to an enhanced oxygen mobility, which in turn promotes C₃H₈ total oxidation activity dominated by Langmuir-Hinshelwood mechanism. Moreover, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) analysis shows that N doping facilities the decomposition of intermediate species (propylene and formate) into CO₂ over the catalyst surface of N-CoAlO/4h more easily. Our reported design in this work will provide a promising way to develop abundant oxygen vacancies of Co-based catalysts derived from hydrotalcites by a simple NH₃ treatment.

Construction of Au and C60 quantum dots modified materials of Institute Lavoisier-125(Ti) architectures for antibiotic degradation: Performance, toxicity assessment, and mechanistic insight

High-performance and stabilized photocatalytic degradation of antibiotic contaminants still remains a challenge in environmental photocatalysis and has been studied worldwide. In this work, hybrid Au and C60 quantum dots decorated Materials of Institute Lavoisier-125(Ti) (MIL-125(Ti)) composites were successfully fabricated for visible-light photocatalytic tetracycline degradation with pristine MIL-125(Ti) as a comparison. The experimental results revealed that the introduction of C60 quantum dots and Au nanoparticles resulted in highly enhanced visible-light harvesting and charge separation for efficient tetracycline degradation. The optimal Au/C60-MIL-125(Ti)-1.0% sample exhibited the highest visible-light photocatalytic performance, and the corresponding rate constant was approximately 9.19 times of MIL-125(Ti), indicating the significant roles of Au and C60 quantum dots in boosting visible-light absorption and charge separation. Furthermore, the radical species, possible degradation pathways and toxicity assessment, and photocatalytic mechanism were also investigated. Current work indicates a synergistic strategy for enhancing visible-light harvesting and charge separation to fabricate high-performance composite photocatalysts.

Iron-based materials for simultaneous removal of heavy metal(loid)s and emerging organic contaminants from the aquatic environment: Recent advances and perspectives

The existence of heavy metals and emerging organic contaminants in wastewater produces serious toxic residues to the environment. Developing cheap and efficient materials to remove these persistent pollutants is crucial. Iron-based materials are cost-effective and environmentally friendly catalysts, and their applications in the environmental field deserve attention. This paper critically reviewed the removal mechanisms of heavy metals and emerging organic pollutants by different influencing factors. The removal of pollutants (heavy metals and emerging organic pollutants) in a multi-component system was analyzed in detail. The mechanisms of synergism, antagonism and non-interference were discussed. This paper had a certain reference value for the research of wastewater remediation technology which could simultaneously remove various pollutants by iron-based materials.

Cu-Doped Boron Nitride Nanosheets for Solid-Phase Extraction and Determination of Rhodamine B in Foods Matrix

Cu-doped boron nitride nanosheets (Cu-BNNS) were first reported as promising adsorbents for the solid-phase extraction and determination of rhodamine B (RhB) dye in a food matrix. Different characterizations, including XRD, FTIR, XPS, SEM, and TEM, were performed to confirm the formation of the adsorbent. Then, the adsorption performance of Cu-BNNS was investigated by adsorption kinetics, isotherms, and thermodynamics. Multiple extraction parameters were optimized by single-factor experiments. Under optimized conditions, the recoveries in the food matrix were in the range of 89.8–95.4%, with the spiked levels of 100 ng/mL and 500 ng/mL, respectively. This novel system was expected to have great potential to detect RhB in a wide variety of real samples.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Uniform platinum nanoparticles loaded on Universitetet i Oslo-66 (UiO-66): Active and stable catalysts for gas toluene combustion

Highly dispersed Pt nanoparticles supported UiO-66 catalysts were successfully prepared by the incipient wetness impregnation method. Their thermal catalytic performances were evaluated by toluene degradation. The physicochemical properties of the samples were characterized using a series of characterization methods. The catalytic activity of catalysts remained essentially unchanged in the high weight hourly space velocity, stability and water resistance test, which also indicated good catalytic performance. In the reusability test, the catalytic performance was found to be enhanced after the reaction, because of the catalyst might follow a Pt⁰-PtO synergistic catalytic mechanism (similar to Mars-van Krevelen mechanism) and there was a phase transition between Pt⁰ and PtO during the reaction. Firstly, the toluene adsorbed on the catalyst surface was oxidized by the activated lattice oxygen of the PtO. Then, consumption of oxygen atoms led to formation of oxygen vacancies, and finally the molecular oxygen adsorbed by Pt⁰ was activated and passed to the PtO to supplement the oxygen vacancies, forming a redox cycle. In addition, the possible catalytic oxidation mechanism of toluene was also revealed.

Photocatalytic degradation of tetracycline antibiotics using hydrothermally synthesized two-dimensional molybdenum disulfide/titanium dioxide composites

Tetracycline (TC) is a persistent antibiotic used in many countries, including China, India, and the United States of America (USA), because of its low price and effectiveness in enhancing livestock production. However, such antibiotics can have toxic effects on living organisms via complexation with metals, and their accumulation leading to teratogenicity and carcinogenicity. In this study, two-dimensional molybdenum disulfide/titanium dioxide (MoS₂/TiO₂) composites with different amounts of molybdenum disulfide (MoS₂) were prepared via a simple, cost-effective, and pollution-free hydrothermal route. The synthesized MoS₂/TiO₂ microstructures were thoroughly characterized and their performance for the photocatalytic degradation of antibiotics such as TC was investigated. In the degradation experiments, the photocatalytic activities of TiO₂ and the MoS₂/TiO₂ composites were compared, and the effects of different parameters, such as catalyst dose and electrolyte solution pH, were investigated. Under irradiation, the MoS₂/TiO₂ composites possessed superior photodegradation activity toward TC because of their excellent adsorption abilities, suitable band positions, and large surface areas as well as the effective charge-transfer ability of MoS₂. Kinetics studies revealed that the photocatalytic degradation process followed pseudo-first-order reaction kinetics. In addition, a degradation mechanism for TC was proposed.

Multiple cobalt active sites evenly embedded in mesoporous carbon nanospheres derived from a polymer-metal-organic framework: efficient removal and photodegradation of malachite green

The derivative catalysts of polyMOF(Co) effectively degrade malachite green under visible irradiation.

Facile preparation of BiOI/T-ZnOw p–n heterojunction photocatalysts with enhanced removal efficiency for rhodamine B and oxytetracycline

A BiOI/T-ZnOw p–n heterojunction photocatalyst exhibits excellent degradation activities for rhodamine B and oxytetracycline under visible light irradiation.

Graphitic carbon nitride/NH2-MIL-101(Fe) composite for environmental remediation: Visible-light-assisted photocatalytic degradation of acetaminophen and reduction of hexavalent chromium

Herein, an efficient photocatalyst composed of graphitic carbon nitrate and iron-based metal-organic framework (g-C₃N₄/NH₂-MIL-101(Fe)) composite was fabricated by a solvothermal method for the degradation of acetaminophen (AAP) and reduction of Cr(VI) under sunlight illumination. The composite was confirmed by X-ray diffraction. UV-visible spectra showed that the bare g-C₃N₄, pure Fe-MOF, and composite harvest solar light effectively. The photocatalytic experiment indicated that the composite exhibited superior reduction efficiency of Cr(VI) (66%) compared to the bare g-C₃N₄ (35%) and pure Fe-MOF (51%) at pH 7. As the pH decreases from 9 to 2, the reduction efficiency increased. The highest Cr(VI) reduction (91%) was observed at pH 2. On the other hand, the catalyst degraded 94% of AAP at pH 7 compared to the bare g-C₃N₄ (42%) and pure Fe-MOF (60%) in the presence of hydrogen peroxide. A radical scavenger experiment endorsed that the generation of superoxide radicals was the main reason for the AAP degradation. The cyclic stability test indicated that there was no substantial decrease in the degradation efficiency of AAP after ten repeated cycles. The kinetic studies showed that the photodegradation of AAP and reduction Cr(VI) was well-fitted to the first-order kinetics. Gas chromatography-mass spectrometry analysis showed that hydroquinone, aliphatic carboxylic acids, monohydroxy, and dihydroxy paracetamol were the main products formed as a result of such degradation process. Therefore, the iron-based MOF and their composites can be used as effective photocatalysts for pollutants degradation.

Rapid reduction of real-time industry effluent using novel CuO/MIL composite

In this study, a series of novel metal organic framework based composite materials was synthesized using a facile combustion synthesis method. The synthesized materials were characterized using standard analytical techniques for crystallite size, surface functional groups, surface area, porosity, optical properties, and particle size. The increase in the amount of CuO in the composite material resulted decrease in surface area and pore volume. The band-gap energy of the synthesized composites reduced with increase in the amount of CuO. Among the composite, 0.9 CuO:0.1 MIL displayed least emission intensity indicating lower electron-hole recombination and thereby superior charge separation of the material. The increase in the amount of CuO NPs in the composite resulted in increase in the average particle size and decrease in the zeta potential. As an application, the NaBH₄-mediated reduction of Methyl orange dye was studied using the synthesized materials. The increased amount of CuO in the composite resulted in the higher activity of the material. Highest activity was observed with the composite containing 9:1 ratio of CuO and MIL, and this material was further used to investigate the reduction of methylene blue, Rhodamine B, 4-nitrophenol, 2-nitrophenol, and 2, 4-dichlorophenol. The material exhibited excellent activity for all the selected organic pollutants. Finally, the composite containing 9:1 ratio of CuO and MIL was employed for the reduction of a real-time industry effluent and the observed results were encouraging. The reusability aspect of the synthesized material was investigated. Based on the LC-MS analysis, a possible reduction mechanism is proposed.

Preparation of novel and highly active magnetic ternary structures (metal-organic framework/cobalt ferrite/graphene oxide) for effective visible-light-driven photocatalytic and photo-Fenton-like degradation of organic contaminants

Herein, MIL-101(Fe), CoFe₂O₄, novel binary (MIL-101(Fe)/CoFe₂O₄, MIL-101(Fe)/GO and CoFe₂O₄/GO), and ternary (MIL-101(Fe)/CoFe₂O₄/(3%)GO and MIL-101(Fe)/CoFe₂O₄/(7%)GO) magnetic composites based upon the MIL-101(Fe) were synthesized. The XRD, FESEM, TEM, EDX, BET-BJH, FTIR, VSM, DRS, PL, EIS and other electrochemical analyses were applied to characterize samples. The MIL/CoFe₂O₄/(3%)GO demonstrated the best performance compared to other samples for visible light photocatalytic and photo-Fenton-like degradation of Direct Red 23 (DtR-23), Reactive Red 198 (ReR-198) dyes as well as Tetracycline Hydrochloride (TC-H) antibiotic. Degradation of dyes using the ternary composite after 70 min of visible light irradiation was greater than that of 99%. The presence of the optimum GO as a strong electron acceptor in MIL/CoFe₂O₄/(3%)GO not only led to the effective separation of charge carriers and thus reduction of their recombination but also increased the absorption of visible light. The composite possessed good durability in terms of stability and reusability. The PL, EIS and electrochemical analyses indicated that the MIL/CoFe₂O₄/(3%)GO improved the optical properties and photocatalytic performance.

Influence of Alkalinization Over Metal Organic Frameworks MIL-100(Fe) for Enhanced Volatile Organic Compounds (VOCs) Adsorbents

Substantial attempts have been undertaken for the improvement of the air quality over decades; and Volatile Organic Compounds (VOCs) from the chemical and textile industries are truly listed as severe issue to be controlled. To come up with modus operandi for this issue, a novel composite of metal organic frameworks (MOFs) MIL-100(Fe) with salient tuned features of natrite was designed by a green and facile method. Mineralized composite MOFs exhibited enhanced crystallinity than pure MIL-100(Fe) as well showcased a higher surface area of 1300 m² g^-1. Through dynamic acetone pressure swing adsorption setup, MIL-0.05Na (MIL-100(Fe) synthesized with 0.05 mM Na₂CO₃ solution) revealed an enhanced acetone adsorption of 210 mg g ¹ at room temperature. Gas phase adsorption isotherms confirmed the mono layer adsorption behavior. The kinetics models evaluated that the external mass transfer was the rate limiting step for surface adsorption. The thermodynamic study manifested that the adsorption reaction was spontaneous and exothermic. The proposed mechanism of adsorption was the act of physisorption which enriched the adsorbents reusability. This research work provides a futuristic vista to design mineralized Fe-MOFs composites for an energy saving adsorbents for VOCs removal.

Assessment of multiple environmental factors on the adsorptive and photocatalytic removal of gaseous formaldehyde by a nano-TiO2 colloid: Experimental and simulation studies

Environmental factors affecting the photocatalytic oxidation of volatile organic compounds (VOCs) have previously been studied experimentally, but there are few theoretical studies, especially those on surface intermolecular forces. Because of this, it is unclear how multiple coexisting factors impact photocatalytic processes. Herein, comprehensive multi-factorial impact mechanisms of the photocatalytic oxidation of formaldehyde were assessed using experiments and density functional theory simulations. The influence of humidity, concentration, and intermediate formate was investigated using a nano-TiO₂ colloid, followed by adsorption and photocatalytic simulations. The maximum photocatalytic reaction rate and degradation efficiency occurred at 50% humidity due to the initially enhanced and then weakened adsorption and photocatalysis of formaldehyde. This stemmed from the increased number of water molecules and the narrower TiO₂ band gap at low humidities, as well as the competitive adsorption between formaldehyde and excess water molecules at high humidities. Upon increasing the formaldehyde concentration, its photocatalytic oxidation rate increased due to enhanced adsorption, but weakened photocatalysis decreased the photocatalytic efficiency. The intermediate formate enhanced the adsorption and inhibited photocatalysis and did not significantly change the photocatalytic oxidation rate of formaldehyde upon changing the irradiation time. These findings provide guidance for the photocatalytic oxidation of VOCs produced by industrial air pollution.

Tablet-like TiO2/C nanocomposites for repeated type I sonodynamic therapy of pancreatic cancer

Sonodynamic therapy (SDT) represents a viable approach to overcoming the limited ability of photodynamic therapy to penetrate biological barriers. However, pancreatic tumors contain a hypoxic microenvironment that limits the efficacy of oxygen-dependent type II SDT, complicating efforts to develop reliable, stable, and hypoxia-tolerant sonosensitizer. Herein, a tablet-like TiO₂/C nanocomposite with a metal-organic-framework (MOF)-derived carbon structure was designed and found to be hypoxia-tolerant and stable in response to repeated ultrasound irradiation, enabling the TiO₂/C-mediated generation of large quantities of reactive oxygen species (ROS) and thereby achieving efficacious type I SDT. Importantly, this nanocomposite continued to generate ROS in response to repeated ultrasound irradiation, and was able to induce tumor cell apoptosis via SDT-induced DNA damage in vitro and in vivo. This TiO₂/C nanocomposite also exhibited good biocompatibility and did not induce any apparent toxicity in vitro and in vivo. Together, these data highlight TiO₂/C as a valuable nanocomposite capable of facilitating repeated type I SDT, making it a promising tool for the treatment of hypoxic solid pancreatic tumors. STATEMENT OF SIGNIFICANCE: In this research, a tablet-like TiO₂/C nanocomposite with a metal-organic-framework (MOF)-derived carbon structure was designed, which exhibited great stability upon repeated ultrasound irradiation, hypoxic-tolerant ability and good biocompatibility. After ultrasound irradiation, TiO₂/C could efficiently generate reactive oxygen species in an oxygen-independent manner, which overcame the limitation of pure TiO₂ nanoparticles. Therefore, it was applied to repeated type I sonodynamic therapy of hypoxic pancreatic tumor.

Synthesis and characterization of defective UiO-66 for efficient co-immobilization of arsenate and fluoride from single/binary solutions

Here, we aimed to synthesize UiO-66 architected fumaric acid mediated lanthanum (La-fum), zirconium (Zr-fum), and cerium (Ce-fum) metal-organic frameworks (MOFs) for co-immobilizations of both arsenate and fluoride from both single and binary systems. The crystalline behavior of Zr-fum MOF was the lowest compared to the other two forms, due to the fact that it required a modulator support as the nucleus growth nature of zirconium moiety is different. The Langmuir maximum adsorption densities of arsenate (fluoride) were 2.689 (4.240), 1.666 (2.255), and 2.174 (4.155) mmol/g for La-fum, Zr-fum, and Ce-fum, respectively and these adsorption densities were found to have record-high values compared with the existing materials in the literature. The arsenate and fluoride adsorption on the MOF materials were confirmed by XPS, PXRD and FTIR studies. The arsenate adsorption mechanism on La-fum and Ce-fum through monodentate complexation confirmed using the distinguished K-edge shell distance in EXAFS studies. The arsenate and fluoride-sorbed materials were recycled using 0.01 M HNO₃ and were further utilized for six consecutive cycles for both arsenate and fluoride adsorption indicated the feasibility of the materials. This kind of facile and easy solvothermal synthesized MOFs could pave a way towards the removal of toxins in a practical wastewater as these have superior adsorption properties, stability and reusability.

Toxicity and photosynthetic inhibition of metal-organic framework MOF-199 to pea seedlings

Metal-organic framework (MOF) materials are star materials with unique structures and properties. To ensure safe production and applications, the toxicity and environmental hazards of MOF materials should be thoroughly investigated. However, the environmental impact of MOF materials on plants is completely unknown. Herein, we reported the toxicity and photosynthetic inhibitory properties of MOF-199 to pea plants (Pisum sativum L.). MOF-199 was synthesized by hydrothermal method. MOF-199 was copper containing double-pyramid of high surface area (668 m2/g). MOF-199 accelerated the germination of pea seeds, but the total germination rates were unchanged. MOF-199 inhibited the seedling growth at high concentrations. The net photosynthetic rate increased, while the total photosynthesis capability decreased. Damage to the acceptor side of photosystem II was evidenced by chlorophyll fluorescence. Mechanistically, MOF-199 released Cu2+ in the nutrient solution, led to Cu2+ accumulations in seedlings, and promoted oxidative stress. In addition, the photosynthetic inhibitions of MOF-199 were stronger than equivalent concentrations of Cu(NO3)2, implying that MOF-199 particles also contributed to the environmental hazards. Our results highlighted the potential threat of MOF materials to plant growth and photosynthesis.