Manufacture and properties of composite liquid marbles

Biocompatible Hydrogel-Based Liquid Marbles with Magnetosomes

Liquid marbles are widely known for their potential biomedical applications, especially due to their versatility and ease of preparation. In the present work, we prepared liquid marbles with various cores composed of water, agar-based hydrogels, magnetic fluids, or non-aqueous substances. As a coating material, we used biocompatible particles of plant origin, such as turmeric grains and Lycopodium pollen. Additionally, we provided marbles with magnetic properties by incorporating either magnetosomes or iron oxide nanoparticles as a powder or by injecting another magnetic fluid. Structures obtained in this way were stable and susceptible to manipulation by an external magnetic field. The properties of the magnetic components of our marbles were verified using electron paramagnetic resonance (EPR) spectroscopy and vibrating sample magnetometry (VSM). Our approach to encapsulation of active substances such as antibiotics within a protective hydrogel core opens up new perspectives for the delivery of hydrophobic payloads to the inherently hydrophilic biological environment. Additionally, hydrogel marbles enriched with magnetic materials showed promise as biocompatible heating agents under alternating magnetic fields. A significant innovation of our research was also the fabrication of composite structures in which the gel-like core was surrounded without mixing by a magnetic fluid covered on the outside by the particle shell. Our liquid marbles, especially those with a hydrogel core and magnetic content, due to the ease of preparation and favorable properties, have great potential for biomedical use. The fact that we were able to simultaneously produce, functionalize (by filling with predefined cargo), and manipulate (by means of an external magnetic field) several marbles also seems to be important from an application point of view.

Liquid marbles: review of recent progress in physical properties, formation techniques, and lab-in-a-marble applications in microreactors and biosensors

Liquid marbles (LMs) are nonsticking droplets whose surfaces are covered with low-wettability particles. Owing to their high mobility, shape reconfigurability, and widely accessible liquid/particle possibilities, the research on LMs has flourished since 2001. Their physical properties, fabrication mechanisms, and functionalisation capabilities indicate their potential for various applications. This review summarises the fundamental properties of LMs, the recent advances (mainly works published in 2020-2023) in the concept of LMs, physical properties, formation methods, LM-templated material design, and biochemical applications. Finally, the potential development and variations of LMs are discussed.

Tunable encapsulation of sessile droplets with solid and liquid shells

Droplet encapsulations using liquid or solid shells are of significant interest in microreactors, drug delivery, crystallization, and cell growth applications. Despite progress in droplet-related technologies, tuning micron-scale shell thickness over a large range of droplet sizes is still a major challenge. In this work, we report capillary force assisted cloaking using hydrophobic colloidal particles and liquid-infused surfaces. The technique produces uniform solid and liquid shell encapsulations over a broad range (5-200 μm shell thickness for droplet volume spanning over four orders of magnitude). Tunable liquid encapsulation is shown to reduce the evaporation rate of droplets by up to 200 times with a wide tunability in lifetime (1.5 h to 12 days). Further, we propose using the technique for single crystals and cell/spheroid culture platforms. Stimuli-responsive solid shells show hermetic encapsulation with tunable strength and dissolution time. Moreover, scalability, and versatility of the technique is demonstrated for on-chip applications.

Universality of Scaling Laws Governing Contact and Spreading Time Spans of Bouncing Liquid Marbles and its Physical Origin

The impact of liquid marbles coated with a diversity of hydrophobic powders with various solid substrates, including hydrophobic, hydrophilic, and superhydrophobic ones, was investigated. The contact time of the bouncing marbles was studied. Universal scaling behavior of the contact time tc as a function of the Weber number (We) was established; the scaling law tc = tc(We) was independent of the kind of powder and the type of solid substrate. The total contact time consists of spreading time and retraction time. It is weakly dependent on We and this is true for all kinds of studied powders and substrates. This observation hints to the surface tension/inertia spring model governing the impact. By contrast, the spreading time ts scales as [Formula: see text], n = 0.28 - 0.30 ± 0.002. We relate the origin of this scaling law to the viscous dissipation occurring within the spreading marbles. The retraction time tr grows weakly with the Weber number. The scaling law was changed at threshold values of We ≅ 15-20. It is reasonable to explain this change with the breaking of the Leidenfrost regime of spreading under high values of We.

Robust cellulose-based hydrogel marbles with excellent stability for gas sensing

Liquid marbles, as particle-armored droplets, have potential applications in microreactors, biomedicine, controlled release and gas detection. To improve the stability and biocompatibility of marble, biocompatible cellulose acetate particles and 3-allyloxy-2-hydroxy-propyl-cellulose (AHP-cellulose) were used to fabricate robust cellulose-based liquid marbles with excellent stability. Liquid marble was gelled into hydrogel marble via blue-light-irradiated polymerization of AHP-cellulose. The mechanical properties of cellulose-based hydrogel marble are superior to those of liquid marble. The rupture height of liquid marble is 10.5 m, which is 420 times greater than that of water marble (0.025 m). Surprisingly, the hydrogel marble with a 3 % AHP-cellulose concentration remained intact even after being dropped from a height of 50 m, which is comparable with the ability of a leather ball to withstand larger impact. When released from a height of 60 mm, hydrogel marble bounced to approximately 25.5 mm, 881 % higher than liquid marble (2.6 mm). Hydrogel marble exhibited long-lasting stability and was capable of monitoring ammonia with a detection limit of 365.2 mg/m³. The biocompatible cellulose-based hydrogel marble with excellent mechanical stability and reusability detection has great potential in chemical and environmental engineering as gas sensors.

Experimental and Theoretical Investigation on the Dynamic Response of Ferrofluid Liquid Marbles to Steady and Pulsating Magnetic Fields

Liquid marbles are droplets enwrapped by a layer of hydrophobic micro/nanoparticles. Due to the isolation of fluid from its environment, reduction in evaporation rate, low friction with the surfaces, and capability of manipulation even on hydrophilic surfaces, liquid marbles have attracted the attention of researchers in digital microfluidics. This study investigates the manipulation of ferrofluid liquid marbles (FLMs) under DC and pulse width-modulated (PWM) magnetic fields generated by an electromagnet for the first time. At first, the threshold of the magnetic field for manipulating these FLMs is studied. Afterward, the dynamic response of the FLMs to the DC magnetic field for different FLM volumes, coil currents, and initial distances of FLM from the coil is studied, and a theoretical model is proposed. By applying the PWM magnetic field, it is possible to gain more control over the manipulation of the FLMs on the surface and adjust their position more accurately. Results indicate that with a decrease in FLM volume, coil current, and duty cycle, the FLM step length decreases; hence, FLM manipulation is more precise. Under the PWM magnetic field, it is observed that FLM movement is not synchronous with the generated pulse, and even after the coil is turned off, FLMs keep their motion. In the end, with proper adjustment of the electromagnet pulse width, launching of FLMs at a distance farther than the coil is observed.

Effect of surface roughness on the solar evaporation of liquid marbles

HYPOTHESIS

Nanostructured materials are widely used for solar energy harvesting and conversion due to their excellent photothermal properties. It is generally accepted that the better the light absorption ability, the better the photothermal conversion efficiency.

EXPERIMENT

A series of experiments in solar evaporation of liquid marbles (LMs) by coating the droplets with Fe3O4, Ni nanoparticles (NPs) and carbon nanotubes (CNTs) are conducted.

FINDINGS

Conversely, we found that the surface roughness of solar absorber plays a significant role in solar evaporation rather than the light absorption. The results disclose that the Fe3O4 NPs with the lowest absorptivity has the largest roughness on drop surface, while that of CNTs show the opposite properties. The evaporation dynamics of LMs are featured with dome or constant spherical collapse with different roughness. Such dynamic difference arises from the mechanical competition between the capillary force and interparticle interaction. Besides, the strong light-harvesting and near-field radiation enabled by the rough surfaces enhance the solar evaporation. The Fe3O4-LM shows the highest evaporation rate of 6.55 μg/s, which is 1.09 and 1.30 times larger than that of Ni-LM and CNT-LM, respectively. Numerical analysis reveals that the rough surface with stacking arrangement of NPs greatly enhances the light-induced electromagnetic field and heat concentration over the interface, leading to a plasmon-coupling boundary with high temperature for the fast evaporation. Uncovering these properties could be of much help for developments of heatable miniature evaporators or reactors and their counterparts, permitting a broad range of processes with precise temperature and kinetic control.

Liquid marbles, floating droplets: preparations, properties, operations and applications

Liquid marbles (LMs) are non-wettable droplets formed with a coating of hydrophobic particles. They can move easily across either solid or liquid surfaces since the hydrophobic particles protect the internal liquid from contacting the substrate. In recent years, mainly due to their simple preparation, abundant materials, non-wetting/non-adhesive properties, elasticities and stabilities, LMs have been applied in many fields such as microfluidics, sensors and biological incubators. In this review, the recent advances in the preparation, physical properties and applications of liquid marbles, especially operations and floating abilities, are summarized. Moreover, the challenges to achieve uniformity, slow volatilization and stronger stability are pointed out. Various applications generated by LMs' structural characteristics are also expected.

Wetting Dynamics of Nanoparticle Dispersions: From Fully Spreading to Non-sticking and the Deposition of Nanoparticle-Laden Surface Droplets

Controlled transport of liquid droplets on solid surfaces is critical in many practical applications, such as self-cleaning surfaces, coating, drug delivery, and agriculture. Non-adhesive liquid drops levitate on solid surfaces; therefore, they are highly mobile and directed toward desired locations by external stimuli. Although research on liquid-repellent surfaces has proliferated, the existing methods are still limited to creating surface roughness or coating the liquid droplets. Here, we create non-contact aqueous drops on hydrophilic surfaces in an oleic environment and use them to deposit submicrometer droplets encapsulating nanoparticles on solid surfaces. A glass surface is buried under an oil phase that contains a high concentration of Span 80 surfactants, and a drop of silica nanoparticle dispersion is released on the solid surface. We study the effect of surfactant concentration in oil and nanoparticle concentration in water on wetting dynamics and report a plethora of droplet spreading regimes from fully wetting to non-wetting. We find a threshold Span 80 concentration above which surfactant assemblies are formed on the solid and prevent the direct contact of the drop with the surface. At the same time, water-in-oil emulsions are generated at the drop-oil interface. The drop moves and leaves a trace of emulsions with encapsulated nanoparticles on the solid. We demonstrate the possibility of local surface coating with hydrophilic nanoparticles in a hydrophobic medium. The developed methodology in this study is a generic approach facilitating the droplet patterning in numerous applications, from pharmaceutical polymetric carriers to the formulation of cosmetics, insecticides, and biomedical diagnoses.

Osmotic evolution of composite liquid marbles

HYPOTHESIS

We hypothesized that the reported evolution (growth) of composite water marbles filled with saline water and coated with lycopodium dispersed in a thin layer of silicone oil is due to the osmotic mass transfer. The hypothesis is supported by the semi-empirical model of osmotic growth of small liquid marbles floating on distilled water.

EXPERIMENTS

Saline composite, silicone oil-coated marbles floating on distilled water grew with time; whereas, composite marbles filled with distilled water floating on aqueous solutions of NaCl lost mass with time and shrunk. However, composite liquid marbles filled with saline water and floating on aqueous solutions of NaCl remained stable during 25 h of the laboratory experiment.

FINDINGS

The reported findings are reasonably attributed to osmotic mass transport through the thin silicon layer filled with lycopodium particles coating the marbles, acting as an osmotic membrane. This is supported by the suggested model for the osmotic growth of marbles.

Survival of Virus Particles in Water Droplets: Hydrophobic Forces and Landauer's Principle

Many small biological objects, such as viruses, survive in a water environment and cannot remain active in dry air without condensation of water vapor. From a physical point of view, these objects belong to the mesoscale, where small thermal fluctuations with the characteristic kinetic energy of k_BT (where k_B is the Boltzmann’s constant and T is the absolute temperature) play a significant role. The self-assembly of viruses, including protein folding and the formation of a protein capsid and lipid bilayer membrane, is controlled by hydrophobic forces (i.e., the repulsing forces between hydrophobic particles and regions of molecules) in a water environment. Hydrophobic forces are entropic, and they are driven by a system’s tendency to attain the maximum disordered state. On the other hand, in information systems, entropic forces are responsible for erasing information, if the energy barrier between two states of a switch is on the order of k_BT, which is referred to as Landauer’s principle. We treated hydrophobic interactions responsible for the self-assembly of viruses as an information-processing mechanism. We further showed a similarity of these submicron-scale processes with the self-assembly in colloidal crystals, droplet clusters, and liquid marbles.

Composite Liquid Marbles as a Macroscopic Model System Representing Shedding of Enveloped Viruses

A model macroscopic system imitating the entry of viruses into living cells is suggested. The system represents the contact of a composite (core-shell) liquid marble with hydrophobic/hydrophilic particles. Composite liquid marbles are water droplets coated with silicone oil armored with nanometer-sized hydrophobic particles serving as an interfacial model of a living cell. Composite marbles absorbed hydrophilic polymer particles but prevented hydrophobic particles from entering their core. Swallowing of hydrophilic particles by composite marbles resembles the penetration of viruses into living cells. The interfacial mechanism of absorption is suggested.