Synthesis of BiOBr/Ag3PO4 heterojunctions on carbon-fiber cloth as filter-membrane-shaped photocatalyst for treating the flowing antibiotic wastewater

Heterostructure g-C3N4/Bi2MoO6 PVDF nanofiber composite membrane for the photodegradation of steroid hormone micropollutants

Photocatalytic membrane reactors (PMRs) are a promising technology for micropollutant removal. Sunlight utilization and catalyst surface sites limit photodegradation. A poly(vinylidene fluoride) (PVDF) nanofiber composite membrane (NCM) with immobilized visible-light-responsive g-C3N4/Bi2MoO6 (BMCN) were developed. Photodegradation of steroid hormones with the PVDF-BMCN NCM was investigated with varying catalyst properties, operating conditions, and relevant solution chemistry under solar irradiation. Increasing CN ratio (0-65 %) enhanced estradiol (E2) degradation from 20 ± 10 to 75 ± 7 % due to improved sunlight utilization and photon lifetime. PVDF nanofibers reduced self-aggregation of catalysts. Hydraulic residence time and light intensity enhanced the photodegradation. With the increasing pH value, the E2 removal decreased from 84 ± 4 to 67 ± 7 % owing to electrical repulsion and thus reduced adsorption between catalysts and E2. A removal of 96 % can be attained at environmentally relevant feed concentration (100 ng.L-1) with a flux of 60 L.m-2.h-1, irradiance of 100 mW.cm-2, and 1 mg.cm-2 BMCN65 loading. This confirmed that heterojunction photocatalysts can enhance micropollutants degradation in PMRs.

Photocatalytic nanohybrid membranes for highly efficient wastewater treatment: A comprehensive review

Wastewater is inevitably generated from human activities as part of the life cycle chain that potentially damages the environment. The integration of photocatalytic reaction and membrane separation for wastewater treatment has gained great attention in recent studies. However, there are still many technical limitations for its application such as toxic metal release, catalyst deactivation, fouling/biofouling, polymer disintegration, and separation performance decline. Different types, combinations, and modifications of photocatalysts material combined with membranes such as semiconductor metal oxides, binary/ternary hybrid metal oxides, elemental doped semiconductors, and metal-organic frameworks (MOFs) for improving the performance and compatibility are presented and discussed. The strategies of incorporating photocatalysts into membrane matrix for pursuing the most stable membrane integrity, high photocatalytic efficiency, and excellent perm-selectivity performance in the very recent studies were discussed. This review also outlines the performance enhancement of photocatalytic membranes (PMs) in wastewater treatment and its potential for water reclamation. Photocatalysts enhanced membrane separation by inducing anti-fouling and self-cleaning properties as well as antibacterial activity. Based on the reviewed study, PMs are possible to achieve complete removal of emerging contaminants and ∼99% reduction of bacterial colony that leading on the zero liquid discharge (ZLD). However, the intensive exposure of photo-induced radicals potentially damages the polymeric membrane. Therefore, future studies should be focused on fabricating chemically stable host-membrane material. Moreover, the light source and the membrane module design for the practical application by considering the hydrodynamic and cost-efficiency should be a concern for technology diffusion to the industrial-scale application.

A Literature Review of Modelling and Experimental Studies of Water Treatment by Adsorption Processes on Nanomaterials

A significant growth in the future demand for water resources is expected. Hence researchers have focused on finding new technologies to develop water filtration systems by using experimental and simulation methods. These developments were mainly on membrane-based separation technology, and photocatalytic degradation of organic pollutants which play an important role in wastewater treatment by means of adsorption technology. In this work, we provide valuable critical review of the latest experimental and simulation methods on wastewater treatment by adsorption on nanomaterials for the removal of pollutants. First, we review the wastewater treatment processes that were carried out using membranes and nanoparticles. These processes are highlighted and discussed in detail according to the rate of pollutant expulsion, the adsorption capacity, and the effect of adsorption on nanoscale surfaces. Then we review the role of the adsorption process in the photocatalytic degradation of pollutants in wastewater. We summarise the comparison based on decomposition ratios and degradation efficiency of pollutants. Therefore, the present article gives an evidence-based review of the rapid development of experimental and theoretical studies on wastewater treatment by adsorption processes. Lastly, the future direction of adsorption methods on water filtration processes is indicated.

Rational construction of Ag3PO4/WO3 step-scheme heterojunction for enhanced solar-driven photocatalytic performance of O2 evolution and pollutant degradation

Heterojunction engineering has been regarded as a promising strategy to sufficiently utilizing photogenerated charge carriers, thus benefiting the improvement of photocatalytic performance. Herein, Ag₃PO₄/WO₃ S-scheme heterojunction was synthesized via a simple deposition-precipitation process, and its photocatalytic activity was evaluated by monitoring water splitting and pollutant degradation under visible light. As a result, Ag₃PO₄/WO₃ with optimized ratio photocatalyst showed enhanced photocatalytic activity in oxygen production (306.6 μmol·L^-1·h^-1) relative to pure Ag₃PO₄ (204.4 μmol·L^-1·h^-1). Additionally, it also exhibits rapid toxicity elimination efficiency over hexavalent chromium ions (Cr⁶⁺) and ciprofloxacin (CIP) with degrading rate of 72% and 83% within 30 min, respectively. According to a series characterization, a possible S-scheme photocatalytic mechanism of Ag₃PO₄/WO₃ was demonstrated in detail, which endowed the heterojunction with strong redox abilities to provide powerful diving force towards the photocatalytic reaction. This work presents an innovative perspective to construct Ag₃PO₄-based S-scheme heterojunctions for boosting photocatalytic performance for various applications.

Perylene diimide supermolecule (PDI) as a novel and highly efficient cocatalyst for photocatalytic degradation of tetracycline in water: A case study of PDI decorated graphitic carbon nitride/bismuth tungstate composite

Employing perylene diimide supermolecule (PDI) as metal-free cocatalyst, a novel PDI/g-C₃N₄/Bi₂WO₆ (PCB) photocatalyst was constructed for the effective degradation of antibiotics. Both the photocatalytic activity and photostability of g-C₃N₄/Bi₂WO₆ (gCB) were further improved after loading PDI. Under simulated sunlight illumination, the apparent rate constant of tetracycline (TC) degradation by PCB reached 2.6 times that of gCB. The photocatalytic activity of PCB still kept over 80% after 4 cycle experiments, while gCB only remained around 21%. The superior activity of PCB was ascribed to the synergism between the extended visible light absorption range through the participation of PDI cocatalyst and facilitated gCB-to-PDI photoelectron transfer. TC would finally be transformed into non-toxic ring opening products and mineralized. This work demonstrated that PDI was an excellent metal-free cocatalyst and exhibited great potential to boost the activity of photocatalysts.

Dual-functional Z-scheme CdSe/Se/BiOBr photocatalyst: Generation of hydrogen peroxide and efficient degradation of ciprofloxacin

The major challenges of clean energy and environmental pollution have resulted in the development of photocatalysis technologies for energy conversion and the degradation of refractory pollutants. Herein, a novel CdSe/Se/BiOBr hydrangea-like photocatalyst was used to produce hydrogen peroxide (H₂O₂) and degrade ciprofloxacin (CIP). The Z-scheme heterojunction structure of the photocatalyst and the doping of selenium (Se) led to the efficient separation of electron-hole pairs and charge transfer. The optimized sample of 2 wt% CdSe/Se/BiOBr produced 142.15 mg·L^-1 rate of H₂O₂, which was much higher than that produced by pure BiOBr (89.4 mg·L^-1) or CdSe/Se (10.9 mg·L^-1). Additionally, almost 100 % of CIP was degraded within 30 min, with a first order rate constant of nearly 5.35 times that of pure BiOBr and 81.44 times that of pure CdSe/Se. The excellent removal efficiency of CIP from natural water matrices confirmed that the composites are promising for the removal of contaminants from natural waterways. Based on trapping experiments, electron spin resonance spectra (ESR) spectroscopy, and density functional theory (DFT) calculations, the photocatalytic mechanisms of H₂O₂ and CIP degradation by the Z-scheme CdSe/Se/BiOBr composites were proposed. Overall, the dual-functional CdSe/Se/BiOBr composite could potentially be applied for photocatalytic production of H₂O₂ and treatment of organic pollutants in water.

Enhanced effect of pyrite on the removal of metronidazole by zero valent iron

The abuse and improper disposal of antibiotics including metronidazole (MNZ) result in serious contamination in aquatic environments. In this study, pyrite, which was not reactive for MNZ removal, was simply mixed with zero valent iron (ZVI) to efficiently remove MNZ in anaerobic aqueous solutions. A dual ZVI/pyrite system consisting of ZVI (1.0 g/L) and pyrite (4.0 g/L) removed MNZ completely in 360 min within a broad pH₀ range (5.0-9.0), and it still maintained a high removal efficiency (~80%) even at a high pH₀ of 10.0. By contrast, single ZVI (1.0 g/L) showed much lower efficiency (4.8%-22.0%) within the same pH₀ range (5.0-10.0). On investigating the mechanism of MNZ removal, the cooperation between ZVI and pyrite enhanced the surface corrosion of ZVI and facilitated the redox cycle of Fe(III)/Fe(II) to generate more sorbed Fe(II), which was a dominant reactive species for MNZ removal. Pyrite also activated the ZVI surface to form FeS@Fe in situ, accelerating the electron transfer from Fe⁰ core to the surface-enriched MNZ, and stimulated the formation of green rust sulfate on the ZVI surface to further promote MNZ removal. LC-MS analysis confirmed ZVI/pyrite reductively transformed MNZ into readily biodegradable products by denitration and cleavage of hydroxyethyl.

Decoration of amine functionalized zirconium metal organic framework/silver iodide heterojunction on carbon fiber cloth as a filter- membrane-shaped photocatalyst for degrading antibiotics

The development of recyclable photocatalyst with high adsorption and excellent photocatalytic performance has attracted considerable attention. Herein, we report a three-component photocatalyst by constructing porous amine functionalized zirconium metal organic framework (UiO-66-NH₂) and broad photo-responsive AgI on flexible carbon fiber cloth (CFC). UiO-66-NH₂ nanoparticles (200-400 nm) were in-situ grown on the surface of CFC (16.5 ± 0.5 μm, 4 × 4 cm²) by a solvothermal route, then AgI particles (50-100 nm) were synthesized on CFC/UiO-66-NH₂ via a modified chemical bath deposition method. The obtained CFC/UiO-66-NH₂/AgI can effectively adsorb 19.0% levofloxacin (LVFX) or 18.4% ciprofloxacin (CIP) in 60 min in the dark and degrade 84.5% LVFX or 79.6% CIP in 120 min under visible light irradiation. Furthermore, the filter-membrane-shaped CFC/UiO-66-NH₂/AgI can be utilized to treat the flowing sewage (CIP, 10 mg/L, ~1 L/h), and the removing efficiency of CIP reached 71.0% after 10 grades. Therefore, this work demonstrates the huge application prospect of recyclable CFC/UiO-66-NH₂/AgI with high adsorption and photocatalytic capacity in flowing sewage treatment under visible light illumination.

Emerging Hybrid Nanocomposite Photocatalysts for the Degradation of Antibiotics: Insights into Their Designs and Mechanisms

The raising occurrence of antibiotics in the global water bodies has received the emerging concern due to their potential threats of generating the antibiotic-resistive and genotoxic effects into humans and aquatic species. In this direction, the solar energy assisted photocatalytic technique offers a promising solution to address such emerging concern and paves ways for the complete degradation of antibiotics with the generation of less or non-toxic by-products. Particularly, the designing of hybrid photocatalyticcomposite materials has been found to show higher antibiotics degradation efficiencies. As the hybrid photocatalysts are found as the systems with ideal characteristic properties such as superior structural, surface and interfacial properties, they offer enhanced photoabsorbance, charge-separation, -transfer, redox properties, photostability and easy recovery. In this context, this review study presents an overview on the recent developments in the designing of various hybrid photocatalytic systems and their efficiency towards the degradation of various emerging antibiotic pharmaceutical contaminants in water environments.

Highly efficient In2S3/WO3 photocatalysts: Z-scheme photocatalytic mechanism for enhanced photocatalytic water pollutant degradation under visible light irradiation

A Z-scheme system In₂S₃/WO₃ heterojunction was fabricated via a mild hydrothermal method and further applied for photocatalytic degradation of tetracycline (TCH) and Rhodamine B (Rh B) under visible light irradiation. The morphological structure, chemical composition and optical properties were studied by XRD, SEM, HRTEM and UV-visible absorption spectra. The results revealed that In₂S₃/WO₃ hierarchical structures were successfully constructed, and the prepared In₂S₃/WO₃ photocatalysts exhibited enhanced visible-light absorption compared to pure WO₃ nanorods, which are essential to improve the photocatalytic performance. The degradation rate of TCH using the In₂S₃(40 wt%)/WO₃ heterostructure (WI40) photocatalyst was about 212 times and 22 times as high as that for pure WO₃ and pure In₂S₃, respectively. The degradation rate of Rh B with the WI40 photocatalyst was about 56 times the efficiency of pure WO₃ and 7.6 times that of pure In₂S₃. The results of the surface photovoltage (SPV), transient photovoltage (TPV) and reactive oxidation species (ROS) scavenger experiments indicated that the Z-scheme system of In₂S₃/WO₃ is favorable for photoexcited charge transfer at the contact interface of In₂S₃ and WO₃, which benefits the charge separation efficiency and depresses the recombination of photoexcited charge, resulting in favorable photocatalytic pollutant degradation efficiency under visible light irradiation.

A Z-scheme system In₂S₃/WO₃ heterojunction was fabricated via a mild hydrothermal method and further applied for photocatalytic degradation of tetracycline (TCH) and Rhodamine B (Rh B) under visible light irradiation.

Superhydrophobic Self-Supporting BiOBr Aerogel for Wastewater Purification

This research was focused on the raw material level construction of bismuth oxybromide (BiOBr) catalysis-loaded 3D cross-linked network polyurethane (PU) foam via the in situ polymerization method. After modification of superhydrophobic polydivinylbenzene nanoparticles, the PU foam possessed excellent superhydrophobic stability. The larger selective absorption oil phase capacity depended on its macroporous structure, and the existence of catalyst BiOBr (the band gap energy was about 2.57 eV) among the PU foam played a crucial role in degrading water-soluble contaminants under visible light irradiation. In this article, the photocatalytic experiment results verify that it has remarkable recycle degradation ability (the degradation efficiency can reach ∼97%) and the capture experiments indicate that the uppermost active species is h⁺.

BiOBr/Ti3C2 nanocomposites prepared via an octanol solvothermal method to achieve enhanced visible photocatalytic properties

BiOBr nanospheres grown in situ on lamellar Ti₃C₂ were synthesised in an octanol solvothermal system to obtain BiOBr/Ti₃C₂ heterojunction composites with high visible photocatalytic activity (OBT).

K, Na and Cl co-doped TiO2 nanorod arrays on carbon cloth for efficient photocatalytic degradation of formaldehyde under UV/visible LED irradiation

A photocatalytic reactor of TiO₂ nanorod arrays on carbon cloth for gaseous formaldehyde degradation.

BiOBr/Ag/AgBr heterojunctions decorated carbon fiber cloth with broad-spectral photoresponse as filter-membrane-shaped photocatalyst for the efficient purification of flowing wastewater

The development of recyclable photocatalysts with broad-spectral photoresponse has drawn much attention for the practical application in flowing wastewater treatment. Herein, we have reported the construction of BiOBr/Ag/AgBr junctions on carbon fiber cloth (CFC) as broad-spectral-response filter-membrane-shaped photocatalyst that is efficient and easily recyclable. With CFC as the substrate, BiOBr nanosheets (diameter: 0.5-1 μm) were firstly synthesized by a hydrothermal method, and then Ag/AgBr nanoparticles (size: 100-300 nm) were prepared on the surface of CFC/BiOBr by using a chemical bath deposition route. CFC/BiOBr/Ag/AgBr presents superior flexibility and wide UV-Vis-NIR photoabsorption (from 200 to 1000 nm). Under visible light irradiation, CFC/BiOBr/Ag/AgBr (area: 4 × 4 cm²) can remove 99.8% rhodamine B (RhB), 99.0% acid orange 7 (AO7), and 93.0% tetracycline (TC) after 120 min, better than CFC/BiOBr (95.4% RhB, 55.0% AO7 and 91.2% TC). Interestingly, when CFC/BiOBr/Ag/AgBr is served as a filter-membrane in a photoreactor to purify the flowing sewage (RhB, rate: ~1.5 L h^-1), the degradation rate of RhB goes up to 90.0% after ten filtering grades. Therefore, CFC/BiOBr/Ag/AgBr has great potential to purify the flowing wastewater as a novel filter-membrane-shaped photocatalyst.

Boosting photocatalytic degradation of antibiotic wastewater by synergy effect of heterojunction and phosphorus doping

Phosphorus-doped g-C₃N₄/ZnIn₂S₄ (PCN/ZIS) heterojunction photocatalysts were constructed by solvothermal method. The physical and chemical properties were investigated with X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy (DRS), etc. The degradation of antibiotic wastewater was used to investigate the photocatalytic activities of composites under visible-light irradiation. The 10% PCN/ZIS had the best photocatalytic degradation performance for tetracycline with a photodegradation rate of 0.0874 min^-1, which is respectively about 2.9 and 52.0 times than that of pure ZIS and PCN. Meanwhile, it was concluded that the holes and ⋅O₂^- (superoxide radicals) play dominant roles in the photocatalytic reactions through radicals trapping experiments, while ⋅OH (hydroxyl radicals) has a negative effect. In addition, 10%PCN/ZIS, with excellent stability and recyclability, also exhibited high photocatalytic activity for terramycin, chlortetracycline and ofloxacin. Overall, with the enhanced photocatalytic performance, PCN/ZIS could be potentially applied for photocatalytic degradation of antibiotic wastewater.

Immobilizing Ag/Cu2O on cotton fabric to enhance visible light photocatalytic activity

Ag/Cu₂O composites were prepared by the solvothermal and photo-reduction method.