High performance flexible hybrid supercapacitors based on nickel hydroxide deposited on copper oxide supported by copper foam for a sunlight-powered rechargeable energy storage system

Recent Advances in Flexible Wearable Supercapacitors: Properties, Fabrication, and Applications

A supercapacitor is a potential electrochemical energy storage device with high-power density (PD) for driving flexible, smart, electronic devices. In particular, flexible supercapacitors (FSCs) have reliable mechanical and electrochemical properties and have become an important part of wearable, smart, electronic devices. It is noteworthy that the flexible electrode, electrolyte, separator and current collector all play key roles in overall FSCs. In this review, the unique mechanical properties, structural designs and fabrication methods of each flexible component are systematically classified, summarized and discussed based on the recent progress of FSCs. Further, the practical applications of FSCs are delineated, and the opportunities and challenges of FSCs in wearable technologies are proposed. The development of high-performance FSCs will greatly promote electricity storage toward more practical and widely varying fields. However, with the development of portable equipment, simple FSCs cannot satisfy the needs of integrated and intelligent flexible wearable devices for long durations. It is anticipated that the combining an FSC and a flexible power source such as flexible solar cells is an effective strategy to solve this problem. This review also includes some discussions of flexible self-powered devices.

Fabrication of Multi-Layered Paper-Based Supercapacitor Anode by Growing Cu(OH)2 Nanorods on Oxygen Functional Groups-Rich Sponge-Like Carbon Fibers

This work addresses the challenges in developing carbon fiber paper-based supercapacitors (SCs) with high energy density by focusing on the limited capacity of carbon fiber. To overcome this limitation, a sponge-like porous carbon fiber paper enriched with oxygen functional groups (OFGs) is prepared, and Cu(OH)2 nanorods are grown on its surface to construct the SC anode. This design results in a multi-layered carbon fiber paper-based electrode with a specific structure and enhanced capacitance. The Cu(OH)2 @PCFP anode exhibits an areal capacitance of 547.83 mF cm-2 at a current density of 1 mA cm-2 and demonstrates excellent capacitance retention of 99.8% after 10 000 cycles. Theoretical calculations further confirm that the Cu(OH)2 /OFGs-graphite heterostructure exhibits higher conductivity, facilitating faster charge transfer. A solid-state SC is successfully assembled using Ketjen Black@PCFP as the cathode and KOH/PVA as the gel electrolyte. The resulting device exhibits an energy density of 0.21 Wh cm-2 at 1.50 mW cm-2 , surpassing the performance of reported Cu(OH)2 SCs. This approach, combining materials design with an understanding of underlying mechanisms, not only expands the range of electrode materials but also provides valuable insights for the development of high-capacity energy storage devices.

Facile Assembly of Hybrid Micro-Supercapacitors for a Sunlight-Powered Energy Storage System

Herein, hybrid micro-supercapacitors (MSCs), consisting of positive CoNi layer double hydroxides (LDHs) decorated on carbon nanotubes (CoNi LDHs@CNTs) and negative CNT electrodes, were assembled by facile drop-coated and electrodeposition methods. The as-fabricated MSCs were optimized in view of electrochemical performance, and the CoNi LDHs-2@CNTs//CNT MSC exhibited a favorable performance and was thus chosen to be the candidate for MSC device package. The packaged CoNi LDHs-2@CNTs//CNT MSC demonstrated a large areal capacitance of 11.0 mF·cm^-2 at a current density of 0.08 mA·cm^-2, a good rate performance (56% areal capacitance retained at a higher current density of 0.4 mA·cm^-2), and a favorable cycling stability and reversibility (92% of the original areal capacitance was retained after 5000 cycles). Furthermore, the MSC device recorded an energy density of 1.5 μWh·cm^-2 at a power density of 42.5 μW·cm^-2 and was successfully applied for the storage of energy supplied by solar cells to operate a red light-emitting diode. All these findings demonstrated the promising practical energy storage application of the as-fabricated hybrid MSC devices in the construction of sunlight-powered energy storage systems.

Preparation of pleated flower-like manganese-cobalt-silicate bimetallic electrode materials for supercapacitors

Transition metal silicates (TMSS) have been studied as potential electrode materials for rechargeable batteries and supercapacitors (SCs), and delicate structural design can further enhance the capacity performance and cycling stability of TMSS electrode materials. Herein, a bimetallic doping modulation strategy was employed, and a novel metal-silicate structure was constructed to obtain SC anode materials with excellent electrochemical properties. Manganese cobalt silicate (AMMnCo) with a pleated flower-like structure was obtained by the reaction of Mn²⁺ and Co²⁺ with acid-etched montmorillonite (AM) substrates using a simple hydrothermal method. The benign, competitive bimetallic mechanism accelerates the growth of manganese silicate and cobalt silicate on treated montmorillonite (MMT), which results in more folded ion-transport channels on the lamellae and improves the electrochemical properties of the transition-metal silicates. AMMnCo exhibits a higher specific capacitance (979F·g^-1/0.5 A·g^-1) and better cycling performance (84 %/10,000 cycles) than its monometallic counterparts. Additionally, AMMnCo//AC (where AC is activated carbon), a hybrid supercapacitor (HSC) device, has a high mass specific capacitance and an energy density reaching 13.7 Wh·kg^-1 at a power density of 246.9 W·kg^-1. Therefore, AMMnCo is a prospective electrode material for high-performance SC applications.

Engineering a Novel AgMn2O4@Na0.55Mn2O4 Nanosheet toward High-Performance Electrochemical Capacitors

Manganese oxides, as a type of two-dimensional (2D) material with high specific area and low cost, are considered promising energy storage materials. Here, we report novel AgMn2O4/Na0.55Mn2O4 nanosheets created by a popular liquid precipitation method with different AgNO3 contents, and their corresponding physical and electrochemical characterizations are performed. The results show that the ultra-thin Na0.55Mn2O4 nanosheets were combined with the AgMn2O4 nanoparticles and an enhancement in their specific capacity was observed compared to the pristine sheets. This electrode material displays a peak specific capacitance of 335.94 F g−1 at 1 A g−1. Using an asymmetric supercapacitor (ASC) assembled using a positive electrode made of AgMn2O4/Na0.55Mn2O4 nanosheets and a reduced graphene oxide (rGO) negative electrode, a high energy density of 65.5 Wh kg−1 was achieved for a power density of 775 W kg−1. The ASC showed good cycling stability with a capacitance value maintained at 90.2% after 10000 charge/discharge cycles. The excellent electrochemical performance of the device was ascribed to the heterostructures and the open space formed by the interconnected manganese oxide nanosheets, which resulted in a rapid and reversible faraday reaction in the interface and further enhanced its electrochemical kinetics.

Augmenting the electrochemical performance of NiMn2O4 by doping of transition metal ions and compositing with rGO

The transition metal ions (TMIs) such as Co²⁺ and Zn²⁺ doped NiMn₂O₄ (NMO)/rGO nanocomposite synthesized by facile sol-gel method was used for the fabrication of supercapacitor. The presence of metal ions in the nanocomposite was confirmed by X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscope (HR-TEM) mapping techniques. The fabricated electrode showed high specific capacitance of 710 F/g which was 3-fold higher than NMO (254 F/g). The addition of RGO in the nanocomposite increased the cycle stability of TMIs doped NMO significantly from 51 to 91%. In addition, the symmetric supercapacitor (SSC) fabricated using TMIs doped NMO/rGO nanocomposite with 3.5 M KOH as an electrolyte delivered a maximum energy density of 43 Wh/kg and power density of 10 kW/kg. Furthermore, the SSC device retained 90% of capacitance retention over 10,000 cycles with coulombic efficiency of 99% at 5 A/g. These result suggested that the TMIs doped NMO/rGO nanocomposite electrode is a promising material for high-energy supercapacitors.

Regulating the core/shell electric structure of Co3O4@Ni-Co layered double hydroxide on Ni foam through electrodeposition for a quasi-solid-state supercapacitor

A flower-like structured electrode material of Co₃O₄@Ni-Co layered double hydroxide (LDH) grown on Ni foam (Co₃O₄@Ni-Co LDH/NF) was prepared via anin situgrowth, annealing and electrodeposition process. The Co₃O₄@Ni-Co LDH/NF electrode was prepared with the optimized conditions of annealing temperature 300 °C, deposition time 20 min and Ni/Co ratio 1:1. The results showed that the as-prepared electrode material exhibited an excellent specific capacitance and great cycling stability. Furthermore, an quasi-solid-state supercapacitor was assembled using the prepared Co₃O₄@Ni-Co LDH/NF as the positive electrode and activated carbon on Ni foam (AC/NF) as the negative electrode. The as-assembled device presented a high energy density and power density.