Soft and hard templates assisted synthesis mesoporous CuO/g-C3N4 heterostructures for highly enhanced and accelerated Hg(II) photoreduction under visible light

Advanced photocatalysis as a viable and sustainable wastewater treatment process: A comprehensive review

In our era, water pollution not only poses a serious threat to human, animal, and biotic life but also causes serious damage to infrastructure and the ecosystem. A set of physical, chemical, and biological technologies have been exploited to decontaminate and/or disinfect water pollutants, toxins, microbes, and contaminants, but none of these could be ranked as sustainable and scalable wastewater technology. The photocatalytic process can harmonize the sunlight to degrade certain toxins, chemicals, microbes, and antibiotics, present in water. For example, transition metal oxides (ZnO, SnO2, TiO2, etc.), when integrated into an organic framework of graphene or nitrides, can bring about more than 90% removal of dyes, microbial load, pesticides, and antibiotics. Similarly, a modified network of graphitic carbon nitride can completely decontaminate petrochemicals. The present review will primarily highlight the mechanistic aspects for the removal and/or degradation of highly concerned contaminants, factors affecting photocatalysis, engineering designs of photoreactors, and pros and cons of various wastewater treatment technologies already in practice. The photocatalytic reactor can be a more viable and sustainable wastewater treatment opportunity. We hope the researcher will find a handful of information regarding the advanced oxidation process accomplished via photocatalysis and the benefits associated with the photocatalytic-type degradation of water pollutants and contaminants.

Domain-limited thermal transformation preparation of novel graphitized carbon-supported layered double oxides for efficient tetracycline degradation

The resource utilization of industrial lignin to construct high-performance catalysts for wastewater treatment field is pioneering research. Herein, the novel graphitized carbon-supported CuCoAl-layered double oxides (LDOs-GC) were successfully designed by the domain-limited thermal transformation technology using sodium lignosulfonate (LS) self-assembled CuCoAl-layered double hydroxides as the precursor. The optimized LDOs-GC catalyst owned the excellent tetracycline (TC) degradation of 98.0% within 15 min by activated peroxymonosulfate (PMS) under optimal conditions (20 mg/L catalyst, 1.5 mM PMS, 30 mg/L TC). The density of metal ions in the catalyst and the synergistic interaction between graphitized carbon (GC) and metal ions played a major role in TC degradation. Based on a comprehensive analysis, the TC degradation in LDOs-GC/PMS system was proved to be accomplished by a combination of free radicals (SO4·- and HO·) and non-radicals (1O2). Meanwhile, the possible degradation pathways of TC were proposed by the analysis of TC degradation intermediates and a comprehensive analysis of the rational reaction mechanism for TC degradation by LDOs-GC/PMS system was also performed. This work provides a new strategy for developing novel high-performance catalysts from industrial waste, while offering a green, cheap and sustainable approach to antibiotic degradation.

CdS Deposited In Situ on g-C3N4 via a Modified Chemical Bath Deposition Method to Improve Photocatalytic Hydrogen Production

Ultra-thin two-dimensional materials are attracting widespread interest due to their excellent properties, and they are becoming ideal candidates for a variety of energy and environmental photocatalytic applications. Herein, CdS nanorods are successfully grown in situ between a monolayer of g-C3N4 using a chemical water bath method. Continuous ultrasound is introduced during the preparation process, which effectively prevents the accumulation of a g-C3N4 layer. The g-C3N4@CdS nanocomposite exhibits significantly enhanced photocatalytic activity for hydrogen production under visible-light irradiation, which is attributed to a well-matched band structure and an intimate van der Waals heterojunction interface. The mechanism of photocatalytic hydrogen production is discussed in detail. Moreover, our work can serve as a basis for the construction of other highly catalytically active two-dimensional heterostructures.

Synthesis and Capacitive Properties of Mesoporous Tungsten Oxide Films Prepared by Ultrasonic Spray Deposition

Mesoporous tungsten trioxide (WO3) films are prepared by the combination of the template-assisted sol-gel method and ultrasonic spraying deposition (USD) for supercapacitors, and then the surface morphology and electrochemical performance of the films are studied. Compared to WO3 prepared by the traditional hydrothermal synthesis and spin coating method, the films obtained by USD exhibit advantages such as low cost, minimal material usage, and suitability for large-area in-line manufacturing. Additionally, the mesoporous structure of USD-produced films is also supportive of ion transportation. Due to the high specific surface area of WO3 films deposited by USD, it is a material capable of use in a high-performance energy storage device. Through the control of spray coats, the film thickness and specific capacitance can be effectively controlled. Electrochemical measurements show that the mesoporous WO3 films possess excellent electrochemical performance with a maximum specific capacitance of 109.15 F/g at 0.5 A/g. The cycling performance up to 5000 cycles of mesoporous WO3 films is due to the stable nature of nanocrystalline produced by the combination of USD and sol-gel chemistry.

Ionothermal synthesis of magnetic N-doped porous carbon to immobilize Pd nanoparticles as an efficient nanocatalyst for the reduction of nitroaromatic compounds

Carbon materials play important roles as catalysts or catalyst supports for reduction reactions owing to their high porosity, large specific surface area, great electron conductivity, and excellent chemical stability. In this paper, a mesoporous N-doped carbon substrate (exhibited as N-C) has been synthesized by ionothermal carbonization of glucose in the presence of histidine. The N-C substrate was modified by Fe3O4 nanoparticles (N-C/Fe3O4), and then Pd nanoparticles were stabilized on the magnetic substrate to synthesize an eco-friendly Pd catalyst with high efficiency, magnetic, reusability, recoverability, and great stability. To characterize the Pd/Fe3O4-N-C nanocatalyst, different microscopic and spectroscopic methods such as FT-IR, XRD, SEM/EDX, and TEM were applied. Moreover, Pd/Fe3O4-N-C showed high catalytic activity in reducing nitroaromatic compounds in water at ambient temperatures when NaBH4 was used as a reducing agent. The provided nanocatalyst's great catalytic durability and power can be attributed to the synergetic interaction among well-dispersed Pd nanoparticles and N-doped carbonaceous support.

A CuS@g-C3N4 heterojunction endows scaffold with synergetic antibacterial effect

Graphitic carbon nitride (g-C3N4) had aroused tremendous attention in photodynamic antibacterial therapy due to its excellent energy band structure and appealing optical performance. Nevertheless, the superfast electron-hole recombination and dense biofilm formation abated its photodynamic antibacterial effect. To this end, a nanoheterojunction was synthesized via in-situ growing copper sulfide (CuS) on g-C3N4 (CuS@g-C3N4). On the one hand, CuS could form Fermi level difference with g-C3N4 to accelerate carrier transfer and thus facilitate electron-hole separation. On the other hand, CuS could respond near-infrared light to generate localized thermal to disrupt biofilm. Then the CuS@g-C3N4 nanoparticle was introduced into the poly-l-lactide (PLLA) scaffold. The photoelectrochemistry results demonstrated that the electron-hole separation efficiency was apparently enhanced and thereby brought an approximate sevenfold increase in reactive oxygen species (ROS) production. The thermal imaging indicated that the scaffold possesses a superior photothermal effect, which effectively eradicated the biofilm by disrupting its extracellular DNA and thereby facilitated to the entry of ROS. The entered ROS could effectively kill the bacteria by causing protein, K+, and nucleic acid leakage and glutathione consumption. As a consequence, the scaffold displayed an antibacterial rate of 97.2% and 98.5% against E. coli and S. aureus, respectively.

NIR Responsive Doxorubicin-Loaded Hollow Copper Ferrite @ Polydopamine for Synergistic Chemodynamic/Photothermal/Chemo-Therapy

Osteosarcoma (OS) is the most serious bone malignancy, and the survival rate has not significantly improved in the past 40 years. Thus, it is urgent to develop a new strategy for OS treatment. Chemodynamic therapy (CDT) as a novel therapeutic method can destroy cancer cells by converting endogenous hydrogen peroxide (H₂ O₂ ) into highly toxic hydroxyl radicals (·OH). However, the therapeutic efficacy of CDT is severely limited by the low catalytic efficiency and overexpressed glutathione (GSH). Herein, an excellent nanocatalytic platform is constructed via a simple solvothermal method using F127 as a soft template to form the hollow copper ferrite (HCF) nanoparticle, followed by the coating of polydopamine on the surface and the loading of doxorubicin (DOX). The Fe³⁺ and Cu²⁺ released from HCF@polydopamine (HCFP) can deplete GSH through the redox reactions, and then trigger the H₂ O₂ to generate ·OH by Fenton/Fenton-like reaction, resulting in enhanced CDT efficacy. Impressively, the photothermal effect of HCFP can further enhance the efficiency of CDT and accelerate the release of DOX. Both in vitro and in vivo experiments reveal that the synergistic chemodynamic/photothermal/chemo-therapy exhibits a significantly enhanced anti-OS effect. This work provides a promising strategy for OS treatment.

The photocatalytic process in the treatment of polluted water

Wastewaters often contain toxic organic pollutants with a possible adverse effect on human health and aquatic life upon exposure. Persistent organic pollutants such as dyes and pesticides, pharmaceuticals, and other chemicals are gaining extensive attention. Water treatment utilizing photocatalysis has recently received a lot of interest. Photocatalysis is cutting-edge, alternative technology. It has various advantages, including functioning at normal temperatures and atmospheric pressure, cheap prices, no secondary waste creation, and being readily available and easily accessible. This review presented a comprehensive overview of the advances in the application of the photocatalytic process in the treatment of highly polluted industrial wastewater. The analysis of various literature revealed that TiO₂-based photocatalysts are highly effective in degrading organic pollutants from wastewater compared to other forms of wastewater treatment technologies. The electrical structure of a semiconductor plays a vital role in the photocatalyst's mechanism. The morphology of a photocatalyst is determined by the synthesis method, chemical content, and technical characteristics. The scaled-up of the photoreactors will significantly help in curbing the effect of organic pollutants in wastewater.

Microwave-assisted Synthesis, Characterization, Photocatalytic Degradation of Antibiotics, and Fluorometric Selective Sensing Activity of g-C3N4 Supported CuO Composites

Herein, we have designed for the fabrication of a series of g-C₃N₄/CuO composite by using one-step microwave-assisted synthesis for the degradation of antibiotics and detection of nano-molar range of toxic heavy metal ions. The synthesized g-C₃N₄/CuO composites were analyzed and characterized to know the structure, phase, surface area, absorption region, bandgap, and size of the composites. From the observation of TEM and XRD measurements, g-C₃N₄/CuO composites have hexagonal shape with average diameter of the particles is 25 ± 5 nm. The observed band gap values from UV-vis DRS for g-C₃N₄ nanosheets and CuO NPs are 2.64 eV and 1.72 eV. The synthesized g-C₃N₄/CuO composite has prodigious specific surface area (32.47 m²/g), which is the evident for superior heterogeneous catalytic applications. Therefore, the synthesized g-C₃N₄/CuO composites were tested for the degradation of antibiotics such as tetracycline (TC) and ciprofloxacin (CIP) under UV light illumination, it shows 88.02% and 90.01% degradation was observed within 1 h due to the matching optical band gap and internal charge transfer of excitons with in the heterojunction surface among g-C₃N₄ and CuO in the composite than the individual components (g-C₃N₄ and CuO) due to the high surface area and tiny particles of CuO were randomly deposited on the surface of g-C₃N₄ nanosheets. The catalytic reduction reaction follows as pseudo-first order equation and reused for 5 consecutive cycles without remarkable loss of catalytic activity. Moreover, the synthesized CuO NPs and g-C₃N₄/CuO composites were used as a prominent fluorescence sensing probe for the selective detection of Pb²⁺ in nano-molar range of concentration with K_sv is 1.38 × 10⁴ mol^- 1dm³. It was observed as a linear relationship based on the change in intensity, the limit of detection was determined to be 0.184 nM.

Visible-Light-Driven CO2 Reduction into Methanol Utilizing Sol-Gel-Prepared CeO2-Coupled Bi2O3 Nanocomposite Heterojunctions

Carbon dioxide (CO2) photoreduction into renewable fuels over semiconductor photocatalysts has emerged as a green and sustainable alternative for energy production. Consequently, tremendous efforts are being performed to develop robust and sustainable photocatalysts. Therefore, visible-light active nanocomposite photocatalysts composed of 5.0–20.0 wt.% bismuth oxide (Bi2O3) and cerium oxide (CeO2) were synthesized by a sol-gel-based process. The prepared nanocomposites were evaluated for the promoted photocatalytic reduction of CO2 into methanol (CH3OH). Various characterizations of the obtained photocatalysts exposed an outstanding development of crystalline structure, morphology, and surface texture due to the presence of Bi2O3. Moreover, the absorbance of light in the visible regime was improved with enhanced charge separation, as revealed by the exploration of optical response, photoluminescence, and photocurrent measurements. The overall bandgap calculations revealed a reduction to 2.75 eV for 15% Bi2O3/CeO2 compared to 2.93 eV for pure CeO2. Moreover, the adjusted 2.8 g L−1 dose of 15% Bi2O3/CeO2 selectively produced 1300 μmol g−1 CH3OH after 9 h of visible light irradiation. This photocatalyst also exhibits bearable reusability five times. The improved progression of 15% Bi2O3/CeO2 is denoted by significant charge separation as well as enhanced mobility. This study suggests the application of metal oxide-based heterojunctions for renewable fuel production under visible light.

CdO-supported ZrO2heterojunctions: facile synthesis and rapid visible-light oxidation of atrazine herbicide with superb recyclability

The advancement in ceramic oxide-based photocatalysis has got much attention recently for environmental issues. Atrazine (AZ) is one of the major used herbicides in agricultural and related industries. This work familiarizes a polymeric-assisted sol-gel preparation of high surface area zirconium oxide (ZrO₂) supported with cadmium oxide nanoparticles at minor content (0.5-2.0 wt%). Exploration of the synthesized heterostructures revealed the enhancement of visible-light absorbance and reduction of bandgap energy to 2.76 eV keeping the same crystalline form and high surface area of 170 m²g^‒1. The prepared photocatalysts were used to degrade AZ in water at a concentration of 231.8μM (50 ppm). The 1.5%-introduced CdO to ZrO₂revealed the best-performed photocatalyst for complete oxidation of AZ within 40 at an optimized dose of 1.6 g l^-1. This novel ceramic photocatalyst showed a chemical and structural ability to keep 98.5% of its initial efficiency after five regenerated cycles. The construction of p-n heterojunction between the p-type ZrO₂and the n-type CdO contributed to the comprehensive photocatalytic competence toward the efficient charge separation and photooxidation process.

Mesoporous BiVO4/TiO2 heterojunction: enhanced photoabsorption and photocatalytic ability through promoted charge transfer

BiVO₄ has been constructed into heterojunctions with TiO₂ to boost the photocatalytic ability under visible illumination. Here, mesoporous BiVO₄/TiO₂ nanocomposites have been fabricated by a facile sol-gel approach utilizing nonionic surfactant and addressed for morphological, optical, structural, and degradation of ciprofloxacin (CIP) in water under visible illumination as an antibiotic pollutant model. The TEM images demonstrated that the TiO₂ NPs are homogenous in terms of shape and size (15 ± 5 nm). The introduction of BiVO₄ into mesoporous TiO₂ could effectively enhance the rapid separation efficiency of the photoinduced carriers and optical absorption. The 3%BiVO₄/TiO₂ photocatalyst possessed the best degradation efficiency (100%) within 60 min which was promoted 20-folds larger than TiO₂ NPs (5%). 3%BiVO₄/TiO₂ nanocomposite exhibited the fastest degradation rate (2.15 × 10^-2 min^-1), which was 40 times faster than bare TiO₂ photocatalyst (0.05 × 10^-2 min^-1). The enhanced photocatalytic ability originated from superior charge separation characteristics and high solar energy absorption in mesopore structures. The recombination rate and mobility of charge carriers were characterized utilizing photoluminescence (PL) and photoelectrochemical measurements. This work highlights the advantages of mesoporous heterojunction BiVO₄/TiO₂ nanocomposites for photocatalytic performances and provides a multilateral route to design an effective wide-spectrum response photocatalyst for the development of comparable materials. The photocatalytic mechanism for degradation CIP over BiVO₄/TiO₂ was discussed in detail..

Visible-light photooxidation of ciprofloxacin utilizing metal oxide incorporated sol-gel processed La-doped NaTaO3 nanoparticles: A comparative study

The supper dissemination of antibiotic waste in water resources has exponentially progressed the vital water and soil pollution that affect human health and the environment. Consequently, there have been several types of research anticipated for the green mineralization of such pollutants. Herein, we intended a surfactant-aided sol-gel formation of lanthanum-doped sodium tantalate (LNTO) nanocrystals. The synthesized 13 nm averaged-size perovskite LNTO nanocrystals were responsive to visible-light irradiation by incorporation of 4.4-5.2 nm oxide nanoparticles, namely Bi₂O₃, CdO, Fe₂O₃, and CuO at 4.0 wt% through coprecipitation. The formed nanomaterials unveiled mesostructured surface textures with specific surface areas of 199-229 m² g^-1. The obtained nanoceramics were employed for the mineralization of 10 ppm of ciprofloxacin antibiotic (CPF) as an emerging antibiotic waste in water under visible light irradiation. The CuO-incorporated LNTO exhibited the best photocatalytic oxidation of CPF after 120 min compared with other oxides with an excellent photoreaction rate of 0.0343 min^-1 which is 49 times higher than the pure LNTO. The 2.0 gL^-1 CuO/LNTO-dose achieved the full photooxidation of CPF at an oxidation speed of 0.0738 min ^-1 within just 1.0 h of visible light irradiation and magnificent regeneration ability. This enhanced activity of CuO/LNTO is regarded as significant light absorption and a bandgap energy reduction to 2.12 eV. Besides that, the heterojunction between CuO and LNTO amended the photogenerated carrier mobility and separation as concluded from the photoluminescence and photocurrent exploration. This comparative work suggests the proper design of low bandgap oxide decoration of solution-based perovskite oxide photocatalysts for promoting the visible-light mineralization of antibiotics in water.

Photocatalytic Oxidative Desulfurization of Thiophene by Exploiting a Mesoporous V2O5-ZnO Nanocomposite as an Effective Photocatalyst

Due to increasingly stringent environmental regulations imposed by governments throughout the world, the manufacture of low-sulfur fuels has received considerable assiduity in the petroleum industry. In this investigation, mesoporous V2O5-decorated two-dimensional ZnO nanocrystals were manufactured using a simple surfactant-assisted sol–gel method for thiophene photocatalytic oxidative desulfurization (TPOD) at ambient temperature applying visible illumination. When correlated to pure ZnO NCs, V2O5-added ZnO nanocomposites dramatically improved the photocatalytic desulfurization of thiophene, and the reaction was shown to follow the pseudo-first-order model. The photocatalytic effectiveness of the 3.0 wt.% V2O5-ZnO photocatalyst was the greatest among all the other samples, with a rate constant of 0.0166 min−1, which was 30.7 significantly greater than that of pure ZnO NCs (0.00054 min−1). Compared with ZnO NCs, and owing to their synergetic effects, substantial creation of hydroxyl radical levels, lesser light scattering action, quick transport of thiophene species to the active recenters, and efficient visible-light gathering, V2O5-ZnO nanocomposites were found to have enhanced photocatalytic efficiency. V2O5-ZnO nanocomposites demonstrated outstanding stability during TPOD. Using mesoporous V2O5-ZnO nanocomposites, the mechanism of the charge separation process was postulated.

Hydrogen production via photoreforming of wastewater under LED light-driven over CuO@exfoliated g-C3N4 nanoheterojunction

As the global interest heading towards net zero emission by 2050, clean hydrogen production technologies becomes limelight among the research community. Besides, the generation of large quantity of industrial wastewaters creates huge dilemma and needs special attention. In this work, synthetic wastewater using formaldehyde (FA) as a model organic pollutant was utilized to produce hydrogen. The photocatalyst, CuO@exfoliated g-C₃N₄ nanoheterojunction was synthesized by an acid treatment and facile chemical precipitation technique. XRD results confirmed the successful formation of exfoliated g-C₃N₄ by expanding the interlayer spacing of the nanosheets via shifting of characteristic peak of graphite towards lower 2θ from 27.97° to 27.04°. Meanwhile, the BET surface area of CuO@exfoliated g-C₃N₄ (199.3 m²/g) was remarkably enhanced as compared to bulk g-C₃N₄ (34.5 m²/g) and exfoliated g-C₃N₄ (104.4 m²/g). The existence of large pores (3.55 cm³/g) in CuO@exfoliated g-C₃N₄ promotes the accessibility of reactant to the surface active sites, escalating the redox reactions. Study on hydrogen production via photoreforming of aqueous formaldehyde over the prepared photocatalysts were conducted. Interestingly, hydrogen generated using CuO@exfoliated g-C₃N₄ (3867 μmol/g) was greatly enhanced by 7 times and 13 times than the counterparts catalysts, exfoliated g-C₃N₄ (532 μmol/g) and pure CuO (271 μmol/g) respectively. By employing the CuO@exfoliated g-C₃N₄ nanoheterojunction, the optimum hydrogen with apparent quantum efficiency (AQE) of 5664 μmol/g and 22% were obtained respectively. Besides, S-scheme reaction mechanism was proposed based on heterojunction formed between the p-type CuO and n-type exfoliated g-C₃N₄ nanosheets.

Photocatalytic activity of CuO nanoparticles for organic and inorganic pollutants removal in wastewater remediation

Heterogeneous photocatalysis is a promising technology for eradicating organic, inorganic, and microbial pollutants in water and wastewater remediation. It is a more preferable method to other conventional wastewater treatment approaches on account of its low cost, environmental benignity, ability to proceed at ambient temperature and pressure conditions, and capability to completely degrade pollutants under appropriate conditions into environmentally safe products. In heterogeneous photocatalysis, pollutant removal is mainly induced by in-situ generated reactive radicals and their subsequent attack when energetic radiation impinges on the semiconductor catalyst. As such, for the effective and economical removal of wastewater pollutants, the employed catalyst should have high photonic efficiency, less toxic, abundant, chemically and photochemically stableand visible light active. Copper (II) oxide (CuO) is one among such promising compounds and its photocatalytic performance has been hampered primarily by rapid recombination and slow mobility of photogenerated charge carriers. So, this review provides an overview of the strategies adopted to mitigate the aforementioned drawbacks and also other operational parameters to boost its catalytic activity towards the elimination of toxic organic and inorganic metal ion contaminants in an aqueous media.

Visible-light responsive ZnSe-anchored mesoporous TiO2heterostructures for boosted photocatalytic reduction of Cr(VI)

The accumulation of Cr(VI) ions in water can cause serious influences on the environment and human health. This work reports a humble synthesis of ZnSe nanoparticles anchored to the sol-gel prepared TiO₂for visible-light-driven photocatalytic reduction of Cr(VI) ions. The 7.9 nm ZnSe nanoparticles were attached to TiO₂surfaces at a content of 1.0-4.0 wt% as experiential by TEM investigation. The designed nanocomposite unveiled mesostructured surfaces exhibiting surface areas of 176-210 m²g^-1. The impregnation of ZnSe amended the visible-light absorption of TiO₂due to the bandgap decrease from 3.14 to 2.90 eV. The photocatalytic reduction of Cr(VI) applying the optimized portion of 3.0 wt% ZnSe/TiO₂was achieved at 177μmol min^-1. This photocatalytic activity is higher than the common Degussa P25 and pristine TiO₂by 20 and 30 times, respectively. The improved performance is signified by the efficient interfacial separation of charge carriers by the introduction of ZnSe. This innovative ZnSe/TiO₂has also shown photocatalytic stability for five consecutive runs.

Highly dispersed NiS2 quantum dots as a promising cocatalyst bridged by acetylene black significantly improved the photocatalytic H2 evolution performance of g-C3N4 nanosheets

In this work, ternary nanocomposite (CNs-AB/NiS2) as a novel efficient H2 evolution photocatalyst without the use of noble metals was successfully synthesized by depositing acetylene black (AB) and ultra-fine NiS2 nanoparticles on the surface of CNs (g-C3N4) through ultrasonic dispersion and chemical vapor deposition methods, respectively. It was revealed that the loaded AB and NiS2 nanoparticles have significantly improved the photocatalytic H2 evolution efficiency of the CNs by improving the photogenerated electron-hole pair separation, visible light absorption and hydrogen evolution kinetics. Besides acting as a cocatalyst, AB served as a conductive electron bridge between CNs and NiS2, which accelerated the effective transfer of electrons from CNs to NiS2 and improved the H2 evolution kinetics of the NiS2 cocatalyst. The H2 evolution experiments revealed that the ternary photocatalyst CNs-AB/NiS210 displayed a H2 evolution rate of up to 2434.85 μmoL g-1 h-1, which was a 1.41 times enhancement compared to that of the binary composite CNs-NiS210 and was 12.43 times higher than that of the pure CNs. Moreover, the ternary photocatalyst CNs-AB/NiS210 not only exhibited excellent photocatalytic activity and stability in the tests, but provided a novel idea for the development of high-efficiency catalysts free of noble metals as well.

g-C3N4: Properties, Pore Modifications, and Photocatalytic Applications

Graphitic carbon nitride (g-C3N4), as a polymeric semiconductor, is promising for ecological and economical photocatalytic applications because of its suitable electronic structures, together with the low cost, facile preparation, and metal-free feature. By modifying porous g-C3N4, its photoelectric behaviors could be facilitated with transport channels for photogenerated carriers, reactive substances, and abundant active sites for redox reactions, thus further improving photocatalytic performance. There are three types of methods to modify the pore structure of g-C3N4: hard-template method, soft-template method, and template-free method. Among them, the hard-template method may produce uniform and tunable pores, but requires toxic and environmentally hazardous chemicals to remove the template. In comparison, the soft templates could be removed at high temperatures during the preparation process without any additional steps. However, the soft-template method cannot strictly control the size and morphology of the pores, so prepared samples are not as orderly as the hard-template method. The template-free method does not involve any template, and the pore structure can be formed by designing precursors and exfoliation from bulk g-C3N4 (BCN). Without template support, there was no significant improvement in specific surface area (SSA). In this review, we first demonstrate the impact of pore structure on photoelectric performance. We then discuss pore modification methods, emphasizing comparison of their advantages and disadvantages. Each method's changing trend and development direction is also summarized in combination with the commonly used functional modification methods. Furthermore, we introduce the application prospects of porous g-C3N4 in the subsequent studies. Overall, porous g-C3N4 as an excellent photocatalyst has a huge development space in photocatalysis in the future.

Recent Advances of Photocatalytic Application in Water Treatment: A Review

Photocatalysis holds great promise as an efficient and sustainable oxidation technology for application in wastewater treatment. Rapid progress developing novel materials has propelled photocatalysis to the forefront of sustainable wastewater treatments. This review presents the latest progress on applications of photocatalytic wastewater treatment. Our focus is on strategies for improving performance. Challenges and outlooks in this promising field are also discussed. We hope this review will help researchers design low-cost and high-efficiency photocatalysts for water treatment.

Preparation, Characterization of Graphitic Carbon Nitride Photo-Catalytic Nanocomposites and Their Application in Wastewater Remediation: A Review

Energy crisis and environmental pollution are the major problems of human survival and development. Photocatalytic technology can effectively use solar energy and is prospective to solve the above-mentioned problems. Carbon nitride is a two-dimensional polymer material with a graphite-like structure. It has good physical and chemical stabilities, unique chemical and electronic energy band structures, and is widely used in the field of photocatalysis. Graphitic carbon nitride has a conjugated large π bond structure, which is easier to be modified with other compounds. thereby the surface area and visible light absorption range of carbon nitride-based photocatalytic composites can be insignificantly increased, and interface electron transmission and corresponding photogenerated carriers separation of streams are simultaneously promoted. Therefore, the present study systematically introduced the basic catalytic principles, preparation and modification methods, characterization and calculation simulation of carbon nitride-based photocatalytic composite materials, and their application in wastewater treatment. We also summarized their application in wastewater treatment with the aid of artificial intelligence tools. This review summarized the frontier technology and future development prospects of graphite phase carbon nitride photocatalytic composites, which provide a theoretical reference for wastewater purification.

Intense Visible-Light Absorption in SrRuO3/C3N4 Heterostructures for the Highly Efficient Reduction of Hg(II)

Strontium ruthenium oxide (SrRuO₃) is recognized as a metallic itinerant ferromagnet and utilized as a conducting electrode in heterostructure oxides with unforeseen optical characteristics, including remarkably low-reflection and high-absorption visible-light spectrum compared to classical metals. By coupling mesoporous SrRuO₃ nanoparticles (NPs) with porous g-C₃N₄ nanosheets for the first time, we evidence remarkably promoted visible light absorption and superior photocatalytic performances for Hg(II) reduction under illumination with visible light. The photocatalytic performance of g-C₃N₄ increased upon boosting the SrRuO₃ percentage to 1.5%, and this (1.5% SrRuO₃/g-C₃N₄ heterostructure) is considered the optimum condition to obtain a high photocatalytic efficiency of about 100% within 50 min. It was promoted 3.68 and 5.75 times compared to SrRuO₃ and g-C₃N₄, respectively. Also, a Hg(II) reduction rate of 1.5% SrRuO₃/g-C₃N₄ was enhanced3.84- and 6.28-fold than those of pure SrRuO₃ NPs and g-C₃N₄, respectively. Such a high photocatalytic performance over SrRuO₃/g-C₃N₄ photocatalysts was explained by the characteristics of SrRuO₃ NPs incorporated on porous g-C₃N₄ layers, which demonstrate strong absorption of visible light with a narrow band gap, a large photocurrent density of ∼9.07 mA/cm², well-dispersed and small particle sizes, and cause facile diffusion of HCOOH and Hg(II) ions and electrons. The present work provides a dramatic novel approach to the challenge of constructing visible-light photosensitive photocatalysts for wastewater remediation.

The Influence of Photocatalytic Reactors Design and Operating Parameters on the Wastewater Organic Pollutants Removal—A Mini-Review

The organic pollutants removal by conventional methods (adsorption, coagulation, filtration, microorganism and enzymes) showed important limitation due to the reluctance of these molecules. An alternative to this issue is represented by the photocatalytic technology considered as an advanced oxidation process (AOP). The photoreactors design and concepts vary based on the working regime (static or dynamic), photocatalyst morphology (powders or bulk) and volume. This mini-review aims to provide specific guidelines on the correlations between the photoreactor concept characteristics (working regime, volume and flow rate), irradiation scenarios (light spectra, irradiation period and intensity) and the photocatalytic process parameters (photocatalyst materials and dosage, pollutant type and concentration, pollutant removal efficiency and constant rate). The paper considers two main photoreactor geometries (cylindrical and rectangular) and analyses the influence of parameters optimization on the overall photocatalytic efficiency. Based on the systematic evaluation of the input data reported in the scientific papers, several perspectives regarding the photocatalytic reactors’ optimization were included.