Dual mode electrochemical-photoelectrochemical sensing platform for hydrogen sulfide detection based on the inhibition effect of titanium dioxide/bismuth tungstate/silver heterojunction

A hydrogen sulfide photoelectrochemical sensor based on BiVO4/Fe2O3 heterojunction

A BiVO4/Fe2O3 heterojunction for non-enzymatic photoelectrochemical (PEC) determination of hydrogen sulfide (H2S) is reported. The BiVO4/Fe2O3 heterojunction promoted the separation of photo-generated carriers, reduced electron-hole recombination, and thus improved electron collection and photocurrent. The proposed BiVO4/Fe2O3/FTO sensor exhibited a linear range of 1-500 μM and a detection limit of 0.51 nM H2S. In addition, high selectivity, good reproducibility, and stability were obtained for H2S sensing. The detection of H2S in water and serum samples demonstrated its feasibility. This work provides a new strategy to detect and understand the bio-function of H2S in the biological environment.

A portable/miniaturized analytical kit for on-site analysis: Chemical vapor generation-visual colorimetric and smartphone RGB dual-mode for detection of sulfide ion in water and food additives

Chemical vapor generation (CVG) was used as a gaseous sample introduction technique for the visual/smartphone RGB readout colorimetric system, with the advantages of efficient matrix elimination and high vapor generation efficiency, this analytical system exhibits a good selectivity and sensitivity. Sulfide ion (S2-) in solution was transformed to its volatile form (H2S), the generated H2S reacted with a silver-containing metal organic framework (Ag-BTC) selectively, Ag2S was thus generated. Ag-BTC (fabricated on paper sheet) changed from white to dark brown, the color variance was identified by smartphone and naked-eye simultaneously. Under the optimized conditions, a limit of detection of 0.02 μg/mL was obtained by naked-eye. Several water samples and commercial food additives were analyzed for confirming its accuracy and potential application for on-site detection, recoveries ranging 94-110 % were obtained. To meet the demand of on-site analysis of S2-, this colorimetric system was integrated in a portable/miniaturized analytical kit. It is an easy-used, affordable and portable analytical kit for S2- detection in field.

A signal-switchable photoelectrochemical biosensor for ultrasensitive detection of long non-coding RNA in cancer cells

Long non-coding RNA (LncRNA) as an emerging tumor biomarker plays a key factor in the early diagnosis of cancer. Herein, an innovative signal-switchable photoelectrochemical (PEC) biosensor based on ZrO2@CuO bimetallic oxides and T7 Exo-assisted signal amplification is reported for the ultrasensitive and selective detection of lncRNA (HOX gene antisense intergenic RNA, HOTAIR) in cancer cells. Firstly, MOFs-derived TiO2 nanodisks as an excellent photoactive material show an anodic background signal. When target lncRNA exists, the abundant auxiliary DNA1 is freed from T7 Exo-assisted cycle signal amplification, and then competitively hybridizes with auxiliary DNA2 on the electrode. Subsequently, bimetallic MOFs-derived ZrO2@CuO octahedra with a high specific surface area and porous structure are introduced into TiO2 nanodisks-modified biosensor, which appears a cathodic photocurrent and achieves a switchable signal. The developed signal-switchable PEC biosensor shows ultrasensitive detection of lncRNA HOTAIR with a detection limit of 0.12 fM, and can eliminate the false interference. Importantly, the established PEC biosensor has good correlation with RT-qPCR analysis (P < 0.05) for the quantification of lncRNA HOTAIR in cancer cells, which has great potential application for biomarker detection in the early diagnosis of cancer.

Advances in MXene-Based Electrochemical (Bio)Sensors for Neurotransmitter Detection

Neurotransmitters are chemical messengers that play an important role in the nervous system's control of the body's physiological state and behaviour. Abnormal levels of neurotransmitters are closely associated with some mental disorders. Therefore, accurate analysis of neurotransmitters is of great clinical importance. Electrochemical sensors have shown bright application prospects in the detection of neurotransmitters. In recent years, MXene has been increasingly used to prepare electrode materials for fabricating electrochemical neurotransmitter sensors due to its excellent physicochemical properties. This paper systematically introduces the advances in MXene-based electrochemical (bio)sensors for the detection of neurotransmitters (including dopamine, serotonin, epinephrine, norepinephrine, tyrosine, NO, and H₂S), with a focus on their strategies for improving the electrochemical properties of MXene-based electrode materials, and provides the current challenges and future prospects for MXene-based electrochemical neurotransmitter sensors.

Evaluating the Effect of Hydrogen Sulfide in the Idiopathic Pulmonary Fibrosis Model with a Fluorescent Probe

Hydrogen sulfide (H₂S), a gaseous signaling molecule, is involved in a wide range of physiological and pathological processes. H₂S has been proven to play a beneficial role in lung diseases, and the relationship between perturbations in endogenous H₂S synthesis and degree with idiopathic pulmonary fibrosis (IPF) has attacted increasing attention. However, the changes in endogenous lung H₂S levels in the pathological progression of chronic pulmonary diseases remain unclear. To this end, we synthesized a fluorescent probe (Bcy-HS) for the selective imaging of H₂S in living cells and mice. This probe was mainly used for in situ in vivo and cellular imaging as well as a systematic assessment of intrapulmonary H₂S levels at different stages of IPF. In addition, we also discussed the potential of H₂S supplementation in the treatment of pulmonary fibrotic diseases. Our results confirmed the key role of H₂S in pulmonary fibrosis. In cellular and mice models of pulmonary fibrosis, intracellular H₂S levels are reduced. However, the severity of oxidative damage and pulmonary fibrosis decreased after NaSH (H₂S donor). Therefore, we concluded that increasing the H₂S content in vivo may be a novel strategy for IPF treatment.

Review of Chemical Sensors for Hydrogen Sulfide Detection in Organisms and Living Cells

As the third gasotransmitter, hydrogen sulfide (H₂S) is involved in a variety of physiological and pathological processes wherein abnormal levels of H₂S indicate various diseases. Therefore, an efficient and reliable monitoring of H₂S concentration in organisms and living cells is of great significance. Of diverse detection technologies, electrochemical sensors possess the unique advantages of miniaturization, fast detection, and high sensitivity, while the fluorescent and colorimetric ones exhibit exclusive visualization. All these chemical sensors are expected to be leveraged for H₂S detection in organisms and living cells, thus offering promising options for wearable devices. In this paper, the chemical sensors used to detect H₂S in the last 10 years are reviewed based on the different properties (metal affinity, reducibility, and nucleophilicity) of H₂S, simultaneously summarizing the detection materials, methods, linear range, detection limits, selectivity, etc. Meanwhile, the existing problems of such sensors and possible solutions are put forward. This review indicates that these types of chemical sensors competently serve as specific, accurate, highly selective, and sensitive sensor platforms for H₂S detection in organisms and living cells.

Codoping g-C3N4 with boron and graphene quantum dots: Enhancement of charge transfer for ultrasensitive and selective photoelectrochemical detection of dopamine

The development of superior photoelectrochemical (PEC) sensors for biosensing has become a major objective of PEC research. However, conventional PEC-active materials are typically constrained by a weak photocurrent response owing to their limited surface-active sites and high electron-hole recombination rate. Here, a boron and graphene quantum dots codoped g-C₃N₄ (named GBCN) as PEC sensor for highly sensitive dopamine (DA) detection was fabricated. GBCN exhibited the greatest photocurrent response and PEC activity compared to free g-C₃N₄ and g-C₃N₄ doped with boron. The proposed PEC sensor for DA determination exhibited a broad linear range (0.001-800 μM) and a low detection limit (0.96 nM). In particular, a sensitivity up to 10.3771 μA/μM/cm² was seen in the case of GBCN. The high PEC activity can be attributed to the following factors: (1) the boron and graphene quantum dots co-doping significantly increased the specific surface area of g-C₃N₄, providing more adsorption sites for DA; (2) the dopants extended the absorption intensity of g-C₃N₄, red-shifting the absorption from 470 to 540 nm; and (3) the synergism of boron and graphene quantum dots efficiently boosted the photogenerated electrons migration from the conduction band of g-C₃N₄ to graphene quantum dots, facilitating charge separation. In addition, GBCN also exhibited good anti-interference ability and stability. This research may shed light on the creation of a highly sensitive and selective PEC platform for detecting biomolecules.

Engineering sensitive gas sensor based on MOF-derived hollow metal-oxide semiconductor heterostructures

Metal-organic frameworks (MOFs) derived hollow heterostructured metal oxide semiconductors (MOSs) are a class of functional porous materials exhibiting distinctive physiochemical properties. Owing to the unique advantages, including large specific surface, high intrinsic catalytic performance, abundant channels for facilitating electron transfer and mass transport, and strong synergistic effect between different components, MOF-derived hollow MOSs heterostructures can work as promising candidates for gas sensing, which have thus attracted increasing attention. Aiming to provide a deep understanding on the design strategy and MOSs heterostructure, this review presents a comprehensive overview on the advantages and applications of MOF-derived hollow MOSs heterostructures when they used n for the detection of toxic gases. In addition, a deep discussion about the perspective and challenge of this interesting field is also well organized, hoping to provide guidance for the future design and development of more accurate gas sensors.

The Roadmap of Graphene-Based Sensors: Electrochemical Methods for Bioanalytical Applications

Graphene (GR) has engrossed immense research attention as an emerging carbon material owing to its enthralling electrochemical (EC) and physical properties. Herein, we debate the role of GR-based nanomaterials (NMs) in refining EC sensing performance toward bioanalytes detection. Following the introduction, we briefly discuss the GR fabrication, properties, application as electrode materials, the principle of EC sensing system, and the importance of bioanalytes detection in early disease diagnosis. Along with the brief description of GR-derivatives, simulation, and doping, classification of GR-based EC sensors such as cancer biomarkers, neurotransmitters, DNA sensors, immunosensors, and various other bioanalytes detection is provided. The working mechanism of topical GR-based EC sensors, advantages, and real-time analysis of these along with details of analytical merit of figures for EC sensors are discussed. Last, we have concluded the review by providing some suggestions to overcome the existing downsides of GR-based sensors and future outlook. The advancement of electrochemistry, nanotechnology, and point-of-care (POC) devices could offer the next generation of precise, sensitive, and reliable EC sensors.

Polyindole-Derived Nitrogen-Doped Graphene Quantum Dots-Based Electrochemical Sensor for Dopamine Detection

The sensitive monitoring of dopamine levels in the human body is of utmost importance since its abnormal levels can cause a variety of medical and behavioral problems. In this regard, we report the synthesis of nitrogen-doped graphene quantum dots (N-GQDs) from polyindole (PIN) via a facile single-step hydrothermal synthetic strategy that can act as an efficient electrochemical catalyst for the detection of dopamine (DA). The average diameter of N-GQDs was ∼5.2 nm and showed a C/N atomic ratio of ∼2.75%. These N-GQDs exhibit a cyan fluorescence color under irradiation from a 365 nm lamp, while PIN has no characteristic PL. The presence of richly N-doped graphitic lattices in the N-GQDs possibly accounts for the improved catalytic activity of N-GQDs/GCE towards electrocatalytic DA detection. Under optimum conditions, this novel N-GQDs-modified electrode exhibits superior selectivity and sensitivity. Moreover, it could detect as low as 0.15 nM of DA with a linear range of 0.001-1000 µM. In addition, the outstanding sensing attributes of the detector were extended to the real samples as well. Overall, our findings evidence that N-GQDs-based DA electrochemical sensors can be synthesized from PIN precursor and could act as promising EC sensors in medical diagnostic applications.

Plasmon-Enhanced Electrocatalysis of Conductive Polymer-Based Nano-Heterojunction for Small Molecule Metabolites Diagnostics

Conductive polymers are promising electrode candidates in the nonenzymatic catalytic detection of small molecule metabolites, due to the tunable electronic conductivity and versatile modifiability. However, the complex catalytic reaction pathway of conductive polymers results in lower detection sensitivity and a narrower linear range compared with clinical metal-based and carbon-based electrodes. Localized surface plasmon resonance (LSPR), characterized by deep strong light-matter coupling, has great potential in driving surface catalytic reactions at an ultrafast rate. Here, we constructed a salix argyracea-like polypyrrole nanowires/silver nanoparticles (PPy/AgNPs) heterojunction electrode using polydopamine as a dopant and chelator. Through cyclic voltammetry, the Mott-Schottky curve, and COMSOL simulation, we demonstrated that the LSPR-excited photocarriers enhanced PPy/AgNPs electrode electrocatalysis. Thus, the detection current response and linear range were significantly improved under the LSPR excitation when taking glucose and hydrogen peroxide as models of small molecule metabolites. Furthermore, we discussed the LSPR-enhanced detection mechanism of PPy/AgNPs electrode from the aspects of the Tafel slope, the apparent electron diffusion coefficient, and the charge transfer resistance. This strategy opens a new avenue toward the design of LSPR-enhanced conductive polymer electrodes.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Ru doping boosts electrocatalytic water splitting

Heteroatom doping plays a crucial role in improving the electrocatalytic performance of catalysts towards water splitting. Owing to the existence of Ru-O moieties, Ru is thus emerging as an ideal dopant for promoting the electrocatalytic performance for water splitting by modifying the electronic structure, introducing extra active sites, improving electronic conductivity, and inducing a strong synergistic effect. Benefitting from these advantages, Ru-doped nanomaterials have been widely investigated and employed as advanced electrocatalysts for water splitting, and many excellent Ru-doped electrocatalysts have been successfully developed. In an effort to obtain a better understanding of the influence of Ru doping on the electrocatalytic water splitting performance of nanocatalysts, we herein summarize the recent progress of Ru-doped electrocatalysts by focusing on the synthesis strategies and advantageous merits. Applications of these new materials in water electrolysis technology are also discussed with emphasis on future directions in this active field of research.

Self-powered Aptasensors Made with the In2O3-In2S3-Ti3C2 Composite for Dual-mode Detection of Microcystin-LR

A dual-mode self-powered aptasensing platform of photoelectrochemical (PEC) and photofuel cell (PFC) was constructed for Microcystin-LR (MC-LR) detection. Specifically, the In₂O₃-In₂S₃-Ti₃C₂ (IO-IS-TC) composite was facilely assembled on the base of MOF-derived In₂O₃ hollow tubulars, and the integrated mechanism and photoconversion efficiency are proposed and discussed in detail. Herein, a promising dual-mode sensing platform was constructed using the IO-IS-TC composite as a photoanode matrix with higher output power and obvious photocurrent response. Moreover, the dual-mode sensing platform did not require external bias and the addition of sacrificial agents under visible light irradiation. The enhanced PEC properties can be attributed to the matched energy level of ternary components and the improved separation of photogenerated carriers. Moreover, aptamer-based recognition was adopted to catch MC-LR molecules, which realized the highly sensitive and selective detection. The PFC aptasensor was exhibited at 50-5 × 10⁵ pmol/L with a detection limit of 17.4 pmol/L, and the PEC aptasensor was realized from 0.5 to 4 × 10⁵ pmol/L with a detection limit of 0.169 pmol/L. The proposed aptasensing platform showed good specificity, reproducibility, and stability, which paved the way for the construction of a fast and ultrasensitive PEC sensing methodology for environmental analysis.

Boosting oxygen evolution of layered double hydroxide through electronic coupling with ultralow noble metal doping

Electrocatalytic water oxidation is a rate-determining step in the water splitting process; however, its efficiency is significantly hampered by the limitations of cost-effective electrocatalysts. Here, an advanced Co(OH)₂ electrocatalyst with ultralow iridium (Ir) doping is developed to enable outstanding oxygen evolution reaction (OER) properties; that is, in a 1 M KOH medium, an overpotential of only 262 mV is required to achieve a current density of 10 mA cm^-2, and a small Tafel slope of 66.9 mV dec^-1 is achieved, which is markedly superior to that of the commercial IrO₂ catalyst (301 mV@10 mA cm^-2; 66.9 mV dec^-1). Through the combination of experimental data and a mechanism study, it is disclosed that the high intrinsic OER activity results from the synergistic electron coupling of oxidized Ir and Co(OH)₂, which significantly moderate the adsorption energy of the intermediates. Moreover, we have also synthesized Ru-Co(OH)₂ nanosheets and demonstrated the universal syntheses of Ir-doped CoM (M = Ni, Fe, Mn, and Zn) layered double hydroxides (LDHs).

Recent Progress on Polyvinyl Alcohol-Based Materials for Energy Conversion

Electrocatalytic energy conversion shows a promising “bridge” to mitigate energy shortage issues and minimizes the ecological implications by synergy with the sustainable energy sources, which calls for low-cost, highly active,...

A novel electrochemical sensor for determination of uric acid in the presence of ascorbic acid and dopamine based on a carbon paste electrode modified with an electrochemically reduced para-nitrobenzoic acid/graphene oxide nanocomposite

In this study, a highly sensitive electrochemical sensor based on a carbon paste electrode was modified by an electrochemically reduced para-nitrobenzoic acid/graphene oxide nanocomposite to measure uric acid.

Superhydrophilic edge-rich graphene for the simultaneous and disposable sensing of dopamine, ascorbic acid, and uric acid

A simple and rapid simultaneous sensing strategy of multiple biomarkers is of great importance but challenging in health diagnosis. In this study, a novel free-standing edge-rich graphene film (fs-ERG) was...

MOF@COF Heterostructure Hybrid for Dual-Mode Photoelectrochemical-Electrochemical HIV-1 DNA Sensing

We developed a novel metal-organic framework (MOF)@covalent-organic framework (COF) hybrid with a hierarchical nanostructure and excellent photoactivity, which further acted as the bifunctional platform of a dual-mode photoelectrochemical (PEC) and electrochemical (EC) biosensor for detecting HIV-1 DNA via immobilizing the HIV-1 DNA probe. First, the presynthesized Cu-MOF nanoellipsoids were used as the template for the in situ growth of the COF network, which was synthesized using copper-phthalocyanine tetra-amine (CoPc-TA) and 2,9-bis[p-(formyl)phenyl]-1,10-phenanthroline as building blocks through the Schiff base condensation. In view of the large specific surface area, abundant reserved amino group, excellent electrochemical activity, and high photoactivity, the obtained Cu-MOF@CuPc-TA-COF heterostructure not only can serve as the sensitive platform for anchoring the HIV-1 DNA probe strands but also can be utilized as the signal transducers for PEC and EC biosensors. Thereby, the constructed biosensor shows the sensitive and selective analysis ability toward the HIV-1 target DNA via the complementary hybridization between probe and target DNA strands. The dual-mode PEC and EC measurements revealed that the Cu-MOF@CuPc-TA-COF-based biosensor displayed a wide linear detection range from 1 fM to 1 nM and an extremely low limit of detection (LOD) of 0.07 and 0.18 fM, respectively. In addition, the dual-mode PEC-EC biosensor also demonstrated remarkable selectivity, high stability, good reproducibility, and preferable regeneration ability, as well as acceptable applicability, for which the detected HIV-1 DNA in human serum showed good consistency with real concentrations. Thereby, the present work can open a new dual-mode PEC-EC platform for detecting HIV-1 DNA based on the porous-organic framework heterostructure.

Rationally engineered high-performance BiVO4/Ag3VO4/SnS2 photoelectrodes for ultrasensitive immunosensing of CYFRA21-1 based on HRP-tyramine-triggered insoluble precipitates

A photoelectrochemical (PEC) biosensor capable of detecting cytokeratin 19 fragment 21-1 (CYFRA21-1) was optimized by taking advantage of the powerful conjugate repeats of horseradish peroxidase and tyramine (HRP-tyramine)-triggered enzymatic biocatalytic precipitation (BCP) on high-performance BiVO₄/Ag₃VO₄/SnS₂ photoelectrodes. Compared with the ubiquitous BCP strategy, we identified a design supporting conjugate repeats generated by HRP and tyramine-triggered immeasurable insoluble precipitates in the presence of hydrogen peroxide and 4-chloro-1-phenol (4-CN), and the steric hindrance improved sensitivity. Moreover, by virtue of BiVO₄, Ag₃VO₄, SnS₂ excellent level matching structure and chemical stability, a heterojunction (BiVO₄/Ag₃VO₄/SnS₂) with high light absorption efficiency has been successfully prepared. The novel heterostructure system of BiVO₄/Ag₃VO₄/SnS₂ with high detection current and low background signal exhibited high-performance PEC determination. Generally, the hitherto untapped biosensor resource realized the sensitive detection of CYFRA21-1 with a wide linear range from 50 fg/mL to 200 ng/mL, and a detection limit of 15 fg/mL, which illustrated the potential for biotechnological applications.

Ultrasensitive photoelectrochemical platform with micro-emulsion-based p-type hollow silver iodide enabled by low solubility product (Ksp) for H2S sensing

Since visible-light (VL) accounting for massive solar radiation energy, a large amount of attention has been paid to the development of highly efficient visible-light-driven (VLD) semiconductor materials. However, despite recent efforts to construct VL active material, hollow structure-based silver iodide (AgI) with appropriate band gap and a large surface area are limited because of lack of a proper synthesis method. Herein, hollow AgI with p-type semiconductor behavior is constructed on the basis of micro-emulsion strategy, which enables admirable cathode photoelectrochemical (PEC) response. The as-prepared hollow AgI is applied to fabricate the PEC sensing platform and reveals a low limit of detection of 0.04 fM and a wide dynamic range up to 5 orders of magnitude toward H₂S. The PEC sensing mechanism is supposed to the 'signal-off' pattern on account of the ultralow solubility product (K_sp) of Ag₂S, derived from the precipitation reaction due to the high affinity between sulfide ion and Ag⁺. Besides, the hollow structure of AgI provides sufficient surface area forin situproducing Ag₂S that serves as recombination center of carrier, thus causing the efficient quenching of photocurrent signals. This work broadens the horizon of structuring VLD semiconductor nanomaterials andK_sp-based H₂S sensing.

Studies of simultaneous electrochemical sensing of Hg2+ and Cd2+ ions and catalytic reduction properties of 4-nitrophenol by CuO, Au, and CuO@Au composite nanoparticles synthesised using a graft copolymer as a bio-template

Simultaneous electrochemical detection of Hg2+ and Cd2+ ions and catalytic reduction of 4NP to 4AP using a novel synthesized graft copolymer/CuO@Au NPs composite.