Facile synthesis of nanoflower-like phosphorus-doped Ni3S2/CoFe2O4 arrays on nickel foam as a superior electrocatalyst for efficient oxygen evolution reaction

Multicomponent Interface and Electronic Structure Engineering in Ir-Doped CoMO4-Co(OH)2 (M = W and Mo) Enable Promoted Oxygen Evolution Reaction

The core principles of multicomponent interface and electronic structure engineering are essential in designing high-performance catalysts for the oxygen evolution reaction (OER). However, combining these aspects within a catalyst is a significant challenge. In this investigation, a novel approach involving the development of hybrid Ir-doped CoMO4-Co(OH)2 (M = W and Mo) hollow nanoboxes was introduced, enabling remarkably efficient water oxidation electrocatalysis. Constructed from ultrathin nanosheet-assembled hollow nanoboxes, these structures boast a wealth of active centers for intermediate species, which in turn enhance both charge transfer and mass transport capabilities. Moreover, the compelling electronic and synergistic effects arising from the interaction between CoMO4 and Co(OH)2 significantly bolster OER electrocatalysis by facilitating efficient electron transfer. The introduction of Ir atoms serves to strategically adjust the electronic structure, fine-tune its electronic state, and operate as active centers to enhance OER electrocatalysis, thus diminishing the overpotential. This configuration results in Ir-CoWO4-Co(OH)2 and Ir-CoMoO4-Co(OH)2 exhibiting impressively low overpotentials of 252 and 261 mV, respectively, to 10 mA cm-2. Utilized in conjunction with the Pt/C catalyst in a two-electrode system for overall water splitting, a mere 1.53 V cell potential is needed to achieve the desired 10 mA cm-2 current density.

Heterostructured ZnFe2O4@Ni3S2 nanosheet arrays on Ni foam as an efficient oxygen evolution catalyst

Honeycomb-like ZnFe2O4@Ni3S2 hierarchical nanosheet arrays on Ni foam (NF) were fabricated via a combined hydrothermal and electrodeposition method. The electrode exhibits high oxygen evolution reaction (OER) activity with low overpotentials of 254 mV at 10 mA cm-2 and 290 mV at 50 mA cm-2, a small Tafel slope of 39.29 mV dec-1 and excellent durability in an alkaline electrolyte.

Ru doping induced interface engineering in flower-liked CoMoO4-RuO2 boosts oxygen electrocatalysis for rechargeable Zn-air battery

Constructing heterogeneous catalysts can significantly boost the electrocatalytic activity due to the improved intrinsic catalytic activity induced by tailored electronic structure and optimized chemisorption to the reaction intermediates. RuO2 based electrocatalysts are especially attractive due to the high catalytic activity of RuO2. To reduce the usage of noble metal and improve the catalytic activity of catalyst, CoMoO4-RuO2 micro-flower was synthesized using a facile hydrothermal-calcination method in this work. CoMoO4-RuO2 exhibits a low overpotential of 177 mV at 10 mA cm-2 for oxygen evolution reaction (OER) and a high half-wave potential of 0.858 V for oxygen reduction reaction (ORR). Moreover, the Zn-air battery assembled using CoMoO4-RuO2 exhibit shows a high maximum discharge power density of 149 mW cm-2 and a large open circuit voltage of 1.38 V. The good performance can be attributed to the incorporation of RuO2, which not only induces extra catalytic active sites, but also forms heterojunction with CoMoO4 to optimize the electronic structure of CoMoO4-RuO2, thereby achieving a better equilibrium of absorption and desorption of intermediates. The work provides insights into designing RuO2 based electrocatalysts for advanced electrocatalysis.

Graphene Architecture-Supported Porous Cobalt-Iron Fluoride Nanosheets for Promoting the Oxygen Evolution Reaction

The design of efficient oxygen evolution reaction (OER) electrocatalysts is of great significance for improving the energy efficiency of water electrolysis for hydrogen production. In this work, low-temperature fluorination and the introduction of a conductive substrate strategy greatly improve the OER performance in alkaline solutions. Cobalt-iron fluoride nanosheets supported on reduced graphene architectures are constructed by a one-step solvothermal method and further low-temperature fluorination treatment. The conductive graphene architectures can increase the conductivity of catalysts, and the transition metal ions act as electron acceptors to reduce the Fermi level of graphene, resulting in a low OER overpotential. The surface of the catalyst becomes porous and rough after fluorination, which can expose more active sites and improve the OER performance. Finally, the catalyst exhibits excellent catalytic performance in 1 M KOH, and the overpotential is 245 mV with a Tafel slope of 90 mV dec-1, which is better than the commercially available IrO2 catalyst. The good stability of the catalyst is confirmed with a chronoamperometry (CA) test and the change in surface chemistry is elucidated by comparing the XPS before and after the CA test. This work provides a new strategy to construct transition metal fluoride-based materials for boosted OER catalysts.

Biosynthesis of ternary NiCoFe2O4 nanoflowers: investigating their 3D structure and potential use in gene delivery

Multicomponent nanoparticle systems are known for their varied properties and functions, and have shown potential as gene nanocarriers. This study aims to synthesize and characterize ternary nickel-cobalt-ferrite (NiCoFe2O4) nanoparticles with the potential to serve as gene nanocarriers for cancer/gene therapy. The biogenic nanocarriers were prepared using a simple and eco-friendly method following green chemistry principles. The physicochemical properties of the nanoparticles were analyzed by X-ray diffraction, vibrating sample magnetometer, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller. To evaluate the morphology of the nanoparticles, the field emission scanning electron microscopy with energy dispersive X-Ray spectroscopy, high-resolution transmission electron microscopy imaging, and electron tomography were conducted. Results indicate the nanoparticles have a nanoflower morphology with a mesoporous nature and a cubic spinel structure, where the rod and spherical nanoparticles became rose-like with a specific orientation. These nanoparticles were found to have minimal toxicity in human embryonic kidney 293 (HEK-293 T) cells at concentrations of 1 to 250 µg·mL-1. We also demonstrated that the nanoparticles could be used as gene nanocarriers for delivering genes to HEK-293 T cells using an external magnetic field, with optimal transfection efficiency achieved at an N/P ratio of 2.5. The study suggests that biogenic multicomponent nanocarriers show potential for safe and efficient gene delivery in cancer/gene therapy.

Phytochemical-assisted green synthesis of CuFeOx nano-rose electrocatalysts for oxygen evolution reaction in alkaline media

This study represents a green synthesis method for fabricating an oxygen evolution reaction (OER) electrode by depositing two-dimensional CuFeO_x on nickel foam (NF). Two-dimensional CuFeO_x was deposited on NF using in situ hydrothermal synthesis in the presence of Aloe vera extract. This phytochemical-assisted synthesis of CuFeO_x resulted in a unique nano-rose-like morphology (petal diameter 30-70 nm), which significantly improved the electrochemical surface area of the electrode. The synthesized electrode was analyzed for its OER electrocatalytic activity and it was observed that using 75% Aloe vera extract in the phytochemical-assisted synthesis of CuFeO_x resulted in improved OER electrocatalytic performance by attaining an overpotential of 310 mV for 50 mA cm^-2 and 410 mV for 100 mA cm^-2. The electrode also sustained robust stability throughout the 50 h of chronopotentiometry studies under alkaline electrolyte conditions, demonstrating its potential as an efficient OER electrode material. This study highlights the promising use of Aloe vera extract as a green and cost-effective way to synthesize efficient OER electrode materials.

A comparative study of iron nanoflower and nanocube in terms of antibacterial properties

It is known that heavy metal containing nanomaterials can easily prevent the formation of microbial cultures. The emergence of new generation epidemic diseases in the last 2 years has increased the importance of both personal and environmental hygiene. For this reason, in addition to preventing the spread of diseases, studies on alternative disinfectant substances are also carried out. In this study, the antibacterial activity of nanoflower and nanocube, which are easily synthesized and nanoparticle species containing iron, were compared. The antioxidant abilities of new synthesized NF@FeO(OH) and NC@α-Fe2O3 were tested by DPPH scavenging activity assay. The highest DPPH inhibition was achieved with NC@α-Fe2O3 as 71.30% at 200 mg/L. NF@FeO(OH) and NC@α-Fe2O3 demonstrated excellent DNA cleavage ability. The antimicrobial capabilities of NF@FeO(OH) and NC@α-Fe2O3 were analyzed with micro dilution procedure. In 500 mg/L, the antimicrobial activity was 100%. In addition to these, the biofilm inhibition of NF@FeO(OH) and NC@α-Fe2O3 were investigated against S. aureus and P. aeruginosa and it was found that they showed significant antibiofilm inhibition. It is suggested that additional studies can be continued to be developed and used as an antibacterial according to the results of the nanoparticles after various toxicological test systems.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13204-023-02822-5.

A salt-baking 'recipe' of commercial nickel-molybdenum alloy foam for oxygen evolution catalysis in water splitting

Ni-based metal foam holds promise as an electrochemical water-splitting catalyst, due to its low cost, acceptable catalytic activity and superior stability. However, its catalytic activity must be improved before it can be used as an energy-saving catalyst. Here, a traditional Chinese recipe, salt-baking, was employed to surface engineering of nickel-molybdenum alloy (NiMo) foam. During salt-baking, a thin layer of FeOOH nano-flowers was assembled on the NiMo foam surface then the resultant NiMo-Fe catalytic material was evaluated for its ability to support oxygen evolution reaction (OER) activity. The NiMo-Fe foam catalyst generated an electric current density of 100 mA cm^-2 that required an overpotential of only 280 mV, thus demonstrating that its performance far exceeded that of the benchmark catalyst RuO₂ (375 mV). When employed as both the anode and cathode for use in alkaline water electrolysis, the NiMo-Fe foam generated a current density (j) output that was 3.5 times greater than that of NiMo. Thus, our proposed salt-baking method is a promising simple and environmentally friendly approach for surface engineering of metal foam for designing catalysts.

Enhanced Oxygen Evolution of a Magnetic Catalyst by Regulating Intrinsic Magnetism

The promotion of magnetic field on catalytic performance has attracted extensive attention. However, little research has been reported on the performance of the oxygen evolution reaction (OER) for the modulating intrinsic magnetism of the catalyst under a magnetic field. Herein, we adjusted the intrinsic magnetism of the Co_xNi_1-xFe₂O₄-nanosheet by adjusting the ratio of Co and Ni, and researched the relationship between the OER activity and the intrinsic magnetism. The results indicate that the CoFe₂O₄-nanosheet has the most OER activity increases in the magnetic field due to the optimal intrinsic magnetism. The required overpotential of CoFe₂O₄-nanosheet@NF to reach a current density of 10 mA cm^-2 was reduced by 21 mV under about 100 mT magnetic field compared with no magnetic field, and the degree of improvement of OER activity of different magnetic catalysts in the same magnetic field is positively correlated with the intrinsic magnetism of the catalyst. Therefore, magnetic field assistance provides a new, effective, and general strategy to improve the activity of electrodes for water splitting.

Dimension Engineering in Noble-Metal-Based Electrocatalysts for Water Splitting

Dimension engineering plays a critical role in determining the electrocatalytic performance of catalysts towards water electrolysis since it is highly sensitive to the surface and interface properties. Bearing these considerations into mind, intensive efforts have been devoted to the rational dimension design and engineering, and many advanced nanocatalysts with multidimensions have been successfully fabricated. Aiming to provide more guidance for the fabrication of highly efficient noble-metal-based electrocatalysts, this review has focused on the recent progress in dimension engineering of noble-metal-based electrocatalysts towards water splitting, including the advanced engineering strategies, the application of noble-metal-based electrocatalysts with distinctive geometric structure from 0D to 1D, 2D, 3D, and multidimensions. In addition, the perspective insights and challenges of the dimension engineering in the noble-metal-based electrocatalysts is also systematically discussed.

Cation-Anion Dual Doping Modifying Electronic Structure of Hollow CoP Nanoboxes for Enhanced Water Oxidation Electrocatalysis

Tuning the electronic state of a nanocatalyst is of vital importance for elevating its catalytic performance toward oxygen evolution reaction (OER). Herein, a cation-anion dual doping strategy has been proposed for modifying the electronic structure of CoP via doping Fe and S atoms. Impressively, Fe doping has been demonstrated to be favorable for improving the carrier density of CoP to produce more hydroxyl radicals (^•OH), while S doping can further modify the electronic structure of CoP to improve the charge-transfer characteristics, thereby synergistically decreasing the energy barrier for the transformation of O* to OOH* and promoting the electrocatalytic OER performance. More importantly, the highly open nanobox structure is also beneficial for the exposure of more accessible catalytically active sites, which can substantially facilitate the electron and mass transport, leading to the superb catalytic OER performance. The successful modulation of OER performance via dual-doping strategy will pose a new strategy for designing more advanced nanocatalysts for energy-related catalysis process.

Recent Progress on Bimetallic-Based Spinels as Electrocatalysts for the Oxygen Evolution Reaction

Electrocatalytic water splitting is a promising and viable technology to produce clean, sustainable, and storable hydrogen as an energy carrier. However, to meet the ever-increasing global energy demand, it is imperative to develop high-performance non-precious metal-based electrocatalysts for the oxygen evolution reaction (OER), as the OER is considered the bottleneck for electrocatalytic water splitting. Spinels, in particular, are considered promising OER electrocatalysts due to their unique properties, precise structures, and compositions. Herein, the recent progress on the application of bimetallic-based spinels (AFe₂ O₄ , ACo₂ O₄ , and AMn₂ O₄ ; where A = Ni, Co, Cu, Mn, and Zn) as electrocatalysts for the OER is presented. The fundamental concepts of the OER are highlighted after which the family of spinels, their general formula, and classifications are introduced. This is followed by an overview of the various classifications of bimetallic-based spinels and their recent developments and applications as OER electrocatalysts, with special emphasis on enhancing strategies that have been formulated to improve the OER performance of these spinels. In conclusion, this review summarizes all studies mentioned therein and provides the challenges and future perspectives for bimetallic-based spinel OER electrocatalysts.

Hierarchical Nanoflowers of MgFe2O4, Bentonite and B-,P- Co-Doped Graphene Oxide as Adsorbent and Photocatalyst: Optimization of Parameters by Box–Behnken Methodology

In the present study, nanocomposites having hierarchical nanoflowers (HNFs) -like morphology were synthesized by ultra-sonication approach. HNFs were ternary composite of MgFe₂O₄ and bentonite with boron-, phosphorous- co-doped graphene oxide (BPGO). The HNFs were fully characterized using different analytical tools viz. X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersion spectroscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry and Mössbauer analysis. Transmission electron micrographs showed that chiffon-like BPGO nanosheets were wrapped on the MgFe₂O₄-bentonite surface, resulting in a porous flower-like morphology. The red-shift in XPS binding energies of HNFs as compared to MgFe₂O₄-bentoniteand BPGO revealed the presence of strong interactions between the two materials. Box–Behnken statistical methodology was employed to optimize adsorptive and photocatalytic parameters using Pb(II) and malathion as model pollutants, respectively. HNFs exhibited excellent adsorption ability for Pb(II) ions, with the Langmuir adsorption capacity of 654 mg g⁻¹ at optimized pH 6.0 and 96% photocatalytic degradation of malathion at pH 9.0 as compared to MgFe₂O₄-bentonite and BPGO. Results obtained in this study clearly indicate that HNFs are promising nanocomposite for the removal of inorganic and organic contaminants from the aqueous solutions.

Hierarchical Hollow CoWO4-Co(OH)2 Heterostructured Nanoboxes Enabling Efficient Water Oxidation Electrocatalysis

Rational design and construction of well-defined hollow heterostructured nanomaterials assembled by ultrathin nanosheets overtakes crucial role in developing high-efficiency oxygen evolution reaction (OER) electrocatalysts. Herein, a reliable metal-organic framework-mediated and cation-exchange strategy to tune the geometric structure and multicomponent heterostructures has been proposed for the fabrication of hollow CoWO₄-Co(OH)₂ hierarchical nanoboxes assembled by rich ultrathin nanosheets. Benefiting from the hierarchical hollow nanostructure, the CoWO₄-Co(OH)₂ nanoboxes offer plenty of metal active centers available for reaction intermediates. Moreover, the well-defined nanointerfaces between CoWO₄ and Co(OH)₂ can function as the bridge for boosting the efficient electron transfer from CoWO₄ to Co(OH)₂. As a consequence, the optimized CoWO₄-Co(OH)₂ nanoboxes can exhibit outstanding electrocatalytic performance toward OER by delivering 10 mA cm^-2 with a low overpotential of 280 mV and a small Tafel slope of 70.6 mV dec^-1 as well as outstanding electrochemical stability. More importantly, this CoWO₄-Co(OH)₂ heterostructured nanocatalyst can couple with Pt/C to drive overall water splitting to achieve 10 mA cm^-2 with a voltage of 1.57 V.

Controlled synthesis of trimetallic nitrogen-incorporated CoNiFe layered double hydroxide electrocatalysts for boosting the oxygen evolution reaction

The development of non-precious trimetallic electrocatalysts exhibiting high activity and stability is a promising strategy for fabricating efficient electrocatalysts for the oxygen evolution reaction (OER). In this study, trimetallic nitrogen-incorporated CoNiFe (N–CoNiFe) was produced to solve the low OER efficiency using a facile co-precipitation method in the presence of ethanolamine (EA) ligands. A series of CoNiFe catalysts at different EA concentrations were also investigated to determine the effects of the ligand in the co-precipitation of a trimetallic system. The introduction of an optimized EA concentration (20 mM) improved the electrocatalytic performance of N–CoNiFe dramatically, with an overpotential of 318 mV at 10 mA cm⁻² in 1.0 M KOH and a Tafel slope of 72.2 mV dec⁻¹. In addition, N–CoNiFe shows high durability in the OER process with little change in the overpotential (ca. 16.0 mV) at 10 mA cm⁻² after 2000 cycles, which was smaller than that for commercial Ir/C (38.0 mV).

A trimetallic nitrogen-incorporated CoNiFe exhibited good catalytic properties toward the oxygen evolution reaction, e.g., high stability and low overpotential (318 mV at 10 mA cm⁻²).

Layered FeCoNi double hydroxides with tailored surface electronic configurations induced by oxygen and unsaturated metal vacancies for boosting the overall water splitting process

Two-dimensional (2D) layered double hydroxides (LDH) with excellent hydrophilic ability and rapid hydroxyl insertion are regarded as one of the most promising electrocatalysts for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) for overall water splitting to produce hydrogen. However, the electrocatalytic HER/OER activities can be restricted by the inert basal plane due to the poor conductivity, deficient active sites and inferior durability despite there being efficient active sites in the material edge. Thus, capturing many more exposed reactive sites to facilitate the rapid reaction kinetics is a crucial strategy. In this paper, both oxygen and unsaturated metal vacancies with FeCoNi LDH materials are generated through a surface activation approach by pre-covering of fluoride and a post-boronizing process. Such a material is grown on Ni foam to form an F-FeCoNi-Ov LDH/NF electrocatalyst. The activated surface of the electrocatalyst with oxygen vacancies and unsaturated metal sites shows enhanced electroconductivity for regulating the surface electronic structure and optimizing the surface adsorption energy for intermediates during HER/OER processes. As a result, this electrocatalyst exhibits excellent electrocatalytic performance for both the HER and OER with low overpotentials, small Tafel slopes and long durability. The enhancement mechanism is also studied deeply for fundamental understanding. For performance validation, an F-FeCoNi-Ov LDH/NF∥F-FeCoNi-Ov LDH/NF water splitting cell is fabricated and needs only 1.54 V and 1.81 V to reach current densities of 10 and 100 mA cm^-2, respectively. This work provides a practicable strategy to develop 2D LDH nanomaterials with boosted electrocatalytic activity for sustainable and clean energy storage systems.

Metal-Organic-Framework-Derived Cobalt nanoparticles encapsulated in Nitrogen-Doped carbon nanotubes on Ni foam integrated Electrode: Highly electroactive and durable catalysts for overall water splitting

The rational design and use of highly efficient, economic, and environmentally friendly bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for developing methods for overall water splitting. Here, we report a facile self-catalyzed growth strategy for in situ encapsulation of Co nanoparticles with N-doped carbon nanotubes (NCNTs) on Ni foam (NF) (Co/NCNTs-NF-T; T represents the pyrolysis temperature). The zeolite imidazole framework (ZIF-67) precursor, which was used as a structure inducer, provided a Co source for catalyzing melamine graphitization and promoted in situ growth of NCNTs on the NF surface. This encapsulation structure and self-supporting system enhance the HER and OER activities of Co/NCNTs-NF-900 (low overpotentials of 66.98 mV for the HER and 240.32 mV for the OER at 10 mA cm^-2). This binder-free catalyst for overall water splitting, i.e., Co/NCNTs-NF-900, has excellent catalytic activity and durability. This method offers a facile and green strategy for designing highly active bifunctional electrocatalysts and paves the way for the future development of energy conversion/storage systems.

A facile one-pot room-temperature growth of self-supported ultrathin rhodium-iridium nanosheets as high-efficiency electrocatalysts for hydrogen evolution reaction

The development of low-cost and high-efficiency electrocatalysts is very important for electrocatalytic hydrogen evolution reaction (HER) in water splitting system. Herein, ultrathin rhodium-iridium nanosheets were facilely in-situ grown on nickel foam (RhIr NSs/NF) by a one-pot aqueous strategy at room temperature. The sheet-like structures with the film thickness of 78 nm were identified by scanning electron microscopy and transmission electron microscopy. The catalyst showed greatly high HER features in both 1.0 M KOH and 0.5 M H₂SO₄ with the overpotentials of 15 and 14 mV to achieve 10 mA cm^-2, respectively, surpassing most Pt-free catalysts. Also, the RhIr NSs/NF exhibited amazing catalytic stability during the long-term operation. This study offers a facile and rational pathway for design and synthesis of advanced HER electrocatalysts for energy conversion devices.

Interface engineering of hierarchical P-doped NiSe/2H-MoSe2 nanorod arrays for efficient hydrogen evolution

Developing non-noble metal-based electrocatalysts with better activity and stability for hydrogen evolution reaction (HER) is crucial for the electrolysis of water. Herein, self-supported three-dimensional (3D) P-doped NiSe/2H-MoSe2 nanorod arrays (denoted...

In-situ construction of 3D hetero-structured sulfur-doped nanoflower-like FeNi LDH decorated with NiCo Prussian blue analogue cubes as efficient electrocatalysts for boosting oxygen evolution reaction

At present, it is urgent for us to develop non-noble metal-based catalysts with abundant reserves and high efficiency towards oxygen evolution reaction (OER) in water electrolysis devices. Herein, cubic NiCo-Prussian blue analogue (PBA)/ flower-like FeNi layered double hydroxide (LDH) heterostructure was facilely in-situ formed on porous nickel foam (NF) via hydrothermal strategy coupled by subsequent sulfurizing treatment (named as S-FeNi LDH@PBA/NF), showing largely facilitated electron transfer over homogeneous counterpart. Also, we investigated the effects of different Fe/Ni feeding ratios on their catalytic properties in some detail. The as-prepared S-FeNi LDH@PBA/NF demonstrated the superior OER activity (e.g. only 243 mV of overpotential required for 50 mA cm^-2) and stability. Accordingly, using the catalyst as anode, the home-assembled S-FeNi LDH@PBA/NF//Pt/C/NF electrolyzer exhibited small Tafel slope (83.1 mV dec^-1) and ultra-stability, showing the potential feasibility in practical water electrolysis. This strategy provides a hopeful model to enhance the OER performance by effectively constructing advanced catalyst with promising heterostructure and optimal electronic structure.

Nanowire-structured FeP-CoP arrays as highly active and stable bifunctional electrocatalyst synergistically promoting high-current overall water splitting

The design and construction of highly efficient and durable non-noble metal bifunctional catalysts for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline media is essential for developing the hydrogen economy. To achieve this goal, we have developed a bifunctional nanowire-structured FeP-CoP array catalyst on carbon cloth with uniform distribution through in-situ hydrothermal growth and phosphating treatment. The unique nanowire array structure and the strong electronic interaction between FeP and CoP species have been confirmed. Electrochemical studies have found that the designed Fe_0.14Co_0.86-P/CC catalyst appears excellent HER (130 mV@10 mA cm^-2)/OER (270 mV@10 mA cm^-2) activity and stability. Moreover, the bifunctional Fe_0.14Co_0.86-P/CC^(+/-) catalyst is also used in simulated industrial water splitting system, where the pair catalyst requires about 1.95 and 2.14 V to reach 500 and 1000 mA cm^-2, even superior to the control RuO₂⁽⁺⁾||Pt/C^(-) catalyst, showing good industrial application prospects. These excellent electrocatalytic properties are attributed to the synergy between FeP and CoP species as well as the unique microstructure, which can accelerate charge transfer, expose more active sites and enhance electrolyte diffusion and gas emissions.

Iron, rhodium-codoped Ni2P nanosheets arrays supported on nickel foam as an efficient bifunctional electrocatalyst for overall water splitting

To enhance the overall water splitting efficiency, it is widely attractive yet challenging to develop low price, abundance and efficient bifunctional electrocatalysts towards oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, Fe,Rh-codoped Ni₂P nanosheets arrays were in situ anchored on three-dimension (3D) Ni foam under hydrothermal condition and successive phosphorization, denoted as Fe,Rh-Ni₂P/NF for simplicity. The unique nanosheets arrays effectively enriched the active sites with easy accessibility. By virtue of the unique sheet-like arrays and 3D porous conductive substrate, the prepared Fe,Rh-Ni₂P/NF showed the low overpotentials of 226 mV at 30 mA cm^-2 towards the OER and 73 mV at 10 mA cm^-2 for the HER. Moreover, the electrocatalyst effectively worked as anode and cathode for overall water splitting system, showing a small voltage of 1.62 V to drive a current density of 10 mA cm^-2. The present work provides alternative option for fabricating advanced catalysts in electrocatalysis and energy devices.

Mesoporous nanostructures of NiCo-LDH/ZnCo2O4 as an efficient electrocatalyst for oxygen evolution reaction

Increasing energy demands for pollution-free and renewable energy technologies have stimulated intense research on the development of inexpensive, highly efficient, and stable non-noble metal electrocatalysts for oxygen evolution reaction (OER). In this study, a superior OER performance was achieved using a tri-metallic (Zn, Co, Ni) high-performance electrocatalyst. We successfully fabricated a peony-flower-like hierarchical ZnCo₂O₄ through an additive-free hydrothermal reaction followed by heat treatment. Then NiCo-LDH (layered double hydroxides) nano-flakes was electrodeposited on the ZnCo₂O₄/GCE surface to prepare NiCo-LDH/ZnCo₂O₄/GCE which was used as electrode for OER. The structure and morphology of the catalysts were characterized by several techniques including Fourier transform infrared spectroscopy, X-ray diffraction spectroscopy, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, elemental mapping and Brunauer-Emmett-Teller method. The NiCo-LDH/ZnCo₂O₄ catalyst provided high catalytic activity toward OER under alkaline condition (1.0 M KOH) with a low overpotential of 260 mV to drive the benchmark current density of 10 mA cm^-2 and Tafel slope of 62 mV dec^-1, as well as long-term stability and high turnover frequency of 0.0641 s^-1 at overpotential of 340 mV. The NiCo-LDH/ZnCo₂O₄ catalyst was found to perform significantly better than NiCo-LDH, ZnCo₂O₄, NiCo-LDH/Co₃O₄, Co₃O₄, and commercial RuO₂ catalysts. The outstanding OER performance of NiCo-LDH/ZnCo₂O₄ catalyst, which may be attributed to the large specific surface area, accelerated mass and electron transport, and synergistic effect of multiple hybrid materials, makes it a promising catalyst for OER.

NiCo2O4 nanoparticles inlaid on sulphur and nitrogen doped and co-doped rGO sheets as efficient electrocatalysts for the oxygen evolution and methanol oxidation reactions

The present work depicts the fabrication of NiCo₂O₄ decorated on rGO, and doped and co-doped rGO and its electrocatalytic activity towards the oxygen evolution reaction and methanol oxidation reaction. The NiCo₂O₄ catalyst with S-doped rGO outperformed the other catalysts, indicating that the sulphur atoms attached on rGO possess low oxophilicity and optimum free energy. This results in facile adsorption of the intermediate products formed during the OER and a rapid release of O₂ molecules. The same catalyst requires an overpotential of 1.51 V vs. RHE to attain the benchmark current density value of 10 mA cm^-2 and shows a Tafel slope of 57 mV dec^-1. It also reveals outstanding stability during its operation for 10 h with a minimum loss in potential. On the other hand, NiCo₂O₄/S,N-rGO reveals superior activity with high efficiency and stability in catalyzing methanol oxidation. The catalyst delivered a low onset potential of 0.12 V vs. Hg/HgO and high current density of 203.4 mA cm^-2 after addition of 0.5 M methanol, revealing the outstanding performance of the electrocatalyst.

One-step pyrolysis synthesis of nitrogen, manganese-codoped porous carbon encapsulated cobalt-iron nanoparticles with superior catalytic activity for oxygen reduction reaction

Replacing precious metal catalysts with low-price and abundant catalysts is one of urgent goals for green and sustainable energy development. It is imperative yet challenging to search low-cost, high-efficiency, and long-durability electrocatalysts for oxygen reduction reaction (ORR) in energy conversion devices. Herein, three-dimensional low-cost Co₃Fe₇ nanoparticles/nitrogen, manganese-codoped porous carbon (Co₃Fe₇/N, Mn-PC) was synthesized with the mixture of dicyandiamide, cobalt (II) tetramethoxyphenylporphyrin (Co(II)TMOPP), hemin, and manganese acetate by one-step pyrolysis and then acid etching. The resultant Co₃Fe₇/N, Mn-PC exhibited excellent durability and prominent ORR activity with more positive onset potential (E_onset, 0.98 V) and half-wave potential (E_1/2, 0.87 V) in 0.1 M KOH electrolyte, coupled with strong methanol resistance. The pyrolysis temperature and optimal balance of graphite with pyridine-nitrogen are of significance for the ORR performance. The prepared Co₃Fe₇/N, Mn-PC displayed excellent ORR performance over commercial Pt/C in the identical environment. It was ascribed to the uniform 3D architecture, Mn- and N-doping effects by finely adjusting the electronic structures, coupled with the synergistic catalytic effects of multi-compositions and multi-active sites. This work provides some constructive guidelines for preparation of low-cost and high-efficiency ORR electrocatalysts.

A label-free electrochemical immunosensor based on encapsulated signal molecules in mesoporous silica-coated gold nanorods for ultrasensitive assay of procalcitonin

For immobilization and signal amplification of the probes, it is feasible and promising by using porous nanomaterials as nanocarriers. Herein, a novel label-free electrochemical immmunosensor was efficiently designed for ultrasensitive detection of procalcitonin (PCT). The immunosensor was prepared by using porous silica-coated gold nanorods (Au NRs@m-SiO₂) to load electroactive dye thionine (Thi) on the electrode surface. Apart from the improved electrical conductivity, the porous feature highly increased the loading amount of Thi to boost the detection signals, while the good biocompatibility and protective microenvironment are beneficial to the largely improved stability for the target. For quantification of PCT, the developed immunosensor exhibited a good linear relationship in the antigen concentration range of 0.001-100 ng mL^-1 with an ultra-low limit of detection (LOD, 0.39 pg mL^-1, S/N = 3). Moreover, the built platform was successfully applied to such assay in human serum samples. The research provides some valuable guidelines for clinical screening and diagnosis of other biomarkers.