Stable and recyclable Fe3C@CN catalyst supported on carbon felt for efficient activation of peroxymonosulfate

Paint sludge derived activated carbon encapsulating with cobalt nanoparticles for non-radical activation of peroxymonosulfate

Industrial solid waste management and recycling are important to environmental sustainability. In this study, cobalt (Co) nanoparticles encapsulated in paint sludge-derived activated carbon (AC) were fabricated. The Co-AC possessed high conductivity, magnetic properties and abundant metal oxide impurities (TiAlSiOx), which was applied as multifunctional catalyst for peroxymonosulfate (PMS) activation. Compared to pure AC, the Co-AC exhibited significant enhanced performance for degradation of tetracycline hydrochloride (TCH) via PMS activation. Mechanism studies by in situ Raman spectroscopy, Fourier infrared spectroscopy, electrochemical analysis and electron paramagnetic resonance suggested that surface-bonded PMS (PMS*) and singlet oxygen (1O2) are the dominant reactive species for TCH oxidation. The non-radical species can efficiently oxidize electron-rich pollutants with high efficiency, which minimized the consumption of PMS and the catalyst. The removal percentages of TCH reached 97 % within 5 min and ∼ 99 % within 15 min in the Co-AC/PMS system. The Co active sites facilitated PMS adsorption to form the PMS* and the TiAlSiOx impurities provided abundant oxygen vacancy for generation of the 1O2. In addition, the Co-AC/PMS system achieved high efficiency and stability for oxidation of the target pollutants over a long-term continuous operation. This work not only offers a cost-effective approach for recycling industrial waste but also provides new insights into the application of waste-derived catalyst for environmental remediation.

Enhanced electron-transfer for peroxymonosulfate activation by Ni single sites adjacent to Ni nanoparticles

Oriented generation of specific reactive oxygen species (ROS) has been challenging in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs). In this work, we constructed a multifunctional catalyst composed of Ni NPs embedded in N-doped carbon nanotubes (NCNTs) with exposed Ni single-atom sites (Ni-NCNTs). The Ni-N4 single sites adjacent to the Ni NPs are more efficient for PMS adsorption and activation, resulting in enhanced production of singlet oxygen (1O2). More interesting, we demonstrated that the superoxide anion radical (O2•-) was generated from 1O2 reduction via the electron transfer from the graphitic-N sites of Ni-NCNTs rather than from O2 reduction or PMS decomposition as reported in previous studies. Thus, Ni-NCNTs can act as both electron acceptor and donor to trigger the cascade production of 1O2 and O2•-, respectively, leading to fast and selective degradation of aqueous organic pollutants. The graphitic-N adjacent to the aromatic π-conjugation of NCNTs facilitated chemisorption of 1O2 onto NCNTs via the strong π*-π interactions, and more importantly, donated the lone pair electrons to trigger the reduction of 1O2 to O2•-. This study unravels the mechanisms for enhanced production of ROS in the nanoconfined Fenton-like systems and shed new light on the application of multifunctional nanocatalyst for rapid wastewater decontamination.

Facile Fabrication of Wood-Derived Porous Fe3C/Nitrogen-Doped Carbon Membrane for Colorimetric Sensing of Ascorbic Acid

Fe3C nanoparticles hold promise as catalysts and nanozymes, but their low activity and complex preparation have hindered their use. Herein, this study presents a synthetic alternative toward efficient, durable, and recyclable, Fe3C-nanoparticle-encapsulated nitrogen-doped hierarchically porous carbon membranes (Fe3C/N-C). By employing a simple one-step synthetic method, we utilized wood as a renewable and environmentally friendly carbon precursor, coupled with poly(ionic liquids) as a nitrogen and iron source. This innovative strategy offers sustainable, high-performance catalysts with improved stability and reusability. The Fe3C/N-C exhibits an outstanding peroxidase-like catalytic activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine in the presence of hydrogen peroxide, which stems from well-dispersed, small Fe3C nanoparticles jointly with the structurally unique micro-/macroporous N-C membrane. Owing to the remarkable catalytic activity for mimicking peroxidase, an efficient and sensitive colorimetric method for detecting ascorbic acid over a broad concentration range with a low limit of detection (~2.64 µM), as well as superior selectivity, and anti-interference capability has been developed. This study offers a widely adaptable and sustainable way to synthesize an Fe3C/N-C membrane as an easy-to-handle, convenient, and recoverable biomimetic enzyme with excellent catalytic performance, providing a convenient and sensitive colorimetric technique for potential applications in medicine, biosensing, and environmental fields.

Architecture and active motif engineering of N-CoS2@C yolk-shell nanoreactor for boosted tetracycline removal via peroxymonosulfate activation: Performance, mechanism and destruction pathways

Rational construction of yolk-shell architecture with regulated binding configuration is crucially important but challengeable for antibiotic degradation via peroxymonosulfate (PMS) activation. In this study, we report the utilization of yolk-shell hollow architecture consisted of nitrogen-doped cobalt pyrite integrated carbon spheres (N-CoS₂@C) as PMS activator to boost tetracycline hydrochloride (TCH) degradation. The creation of yolk-shell hollow structure and nitrogen-regulated active site engineering of CoS₂ endow the resulted N-CoS₂@C nanoreactor with high activity for PMS activating toward TCH degradation. Intriguingly, the N-CoS₂@C nanoreactor exhibits an optimal degradation performance with a rate constant of 0.194 min^-1 toward TCH via PMS activation. The ¹O₂ and SO₄^•- species are demonstrated as the dominant active substances for TCH degradation through quenching experiments and electron spin resonance characterization. The possible degradation mechanism, intermediates and degradation pathways for TCH removal over the N-CoS₂@C/PMS nanoreactor are unveiled. Graphitic N, sp²-hybrid carbon, oxygenated group (C-OH) and Co species are verified as the possible catalytic sites of N-CoS₂@C for PMS activation toward TCH removal. This study offers a unique strategy to engineer sulfides as highly efficient and promising PMS activators for antibiotic degradation.

An anode fabricated by Co electrodeposition on ZIF-8/CNTs/CF for peroxymonosulfate (PMS) activation

A Co@ZIF-8/CNTs-CF anode for PMS activation was prepared by Co electrodeposition on carbon felt (CF) modified with ZIF-8 and carbon nanotubes (CNTs). The results showed that the fabricated Co@ZIF-8/CNTs-CF anode was an effective peroxymonosulfate (PMS) activator toward tetracycline (TC) removal. Compared with that in reaction system of bare CF anode + PMS, the reaction system of Co@ZIF-8/CNTs-CF anode + PMS exhibited 3.08 times decrease in the activation energy demanded and 4.21 times increase in the reaction rate constant (k), resulting in a kinetic favorable process of PMS activation by the Co@ZIF-8/CNTs-CF anode. The enhanced activation performance of the fabricated anode was ascribed to the high contents of the pyrrolic N and low valence state of Co in the Co@ZIF-8/CNTs-CF anode. Furthermore, the influence factors on the characteristics of transformation among the generated reactive species during the anodic PMS activation process were comprehensively investigated by the quenching experiments and the electron paramagnetic resonance (EPR) tests. The results showed that the SO₄^•- and reactive oxygen-containing reactive species (O₂^•- and ¹O₂) were generated during the activation of PMS by anode and became the major contributors toward TC removal. The production of ¹O₂ was through the dismutation of O₂^•-. In addition, the EPR experiments demonstrated that O₂^•- was generated mainly through the anodic PMS activation but the electrochemically driven molecular oxygen reduction reaction (ORR) process. The fabricated Co@ZIF-8/CNTs-CF anode for PMS activation provided a reference for the wastewater treatment based on the electrochemical advanced oxidation processes (EAOPs).

Highly dispersive Ru confined in porous ultrathin g-C3N4 nanosheets as an efficient peroxymonosulfate activator for removal of organic pollutants

Ru species were loaded on a two-dimensional (2D) material of graphitic carbon nitride (2D g-C₃N₄) to serve as the efficient AOP catalysts. The catalytic activity was closely related to the dispersion degree of Ru, as determined by the inherent nanoarchitecture of the supporting material. Ultrathin g-C₃N₄ nanosheets with a unique porous structure were fabricated by further thermally oxidizing and etching bulk g-C₃N₄ (bCN) in air. Homogeneous dispersion of Ru species was successfully achieved on the porous few-layered g-C₃N₄ nanosheets (pCN) by stirring, washing, freeze drying and annealing processes to obtain Ru-pCN catalysts, whereas bCN or multilayered g-C₃N₄ (mCN) led to the aggregation of Ru nanoparticles in Ru-bCN and Ru-mCN materials. The conventional impregnation method also caused the resulting Ru-pCN-imp catalyst with undesirable Ru aggregation in spite of employing pCN. The optimal 4.4Ru-pCN removed 100% of 2,4,6-trichlorophenol (TCP) within only 3 min, superior to its counterpart samples, and exhibited remarkable degradation efficiencies for methyl orange, neutral red, 4-chlorophenol, tetracycline and oxytetracycline. Mechanistic studies suggested that four radicals, e.g., ^•OH, SO₄^{• -}, O₂^{• -} and ¹O₂ were generated during the peroxymonosulfate (PMS) activation, in which SO₄^{• -} and ¹O₂ played a major role.

Monopersulfate in water treatment: Kinetics

The kinetics of monopersulfate based systems in the elimination of potential harmful contaminants has been assessed from a theoretical point of view. A detailed reaction mechanism sustained in the generation of radicals (mainly hydroxyl and sulfate), propagation and termination stages has been proposed. The system of first order differential equations derived has numerically been solved. The effect of main influencing parameters such as contaminant and peroxymonosulfate initial concentrations, intermediate generation, presence of organic matter, role played by anions, has been theoretically obtained. Discussion of simulated results has been accomplished by comparison with experimental data found in the literature. At the sight of the theoretical and empirical data, use of simplistic pseudo first order kinetics is discouraged. Despite considering a significant number of elemental reactions, modelling of the system reveals that a high fraction of them can be neglected due to their insignificant role played in the mechanism. The entire mechanism has been tested when peroxymonosulfate has been activated by UV radiation, although results can be fairly extrapolated to other activation strategies. Finally, a generic model capable of accounting for the effect of a diversity of parameters is proposed. No theoretical background is behind the model, however the generic model clearly improves the results obtained by simple first order kinetics.

Hollow-structured amorphous prussian blue decorated on graphitic carbon nitride for photo-assisted activation of peroxymonosulfate

Heterogeneous activation of peroxymonosulfate (PMS) is one of the most promising techniques for wastewater treatment. Herein, an ingenious system by coupling of photocatalysis and PMS activation was developed, using hollow-structured amorphous prussian blue (A-PB) decorated on graphitic carbon nitride (g-C₃N₄) as the catalyst. Degradation of bisphenol A (BPA) via the A-PB-g-C₃N₄ mediated PMS activation under visible light (Vis) was systematically investigated. Astonishingly, it was found that ~ 82.0%, 92.6%, 98.2% and 99.3% of BPA (40 mg/L) were removed within 2, 4, 6 and 7 min, respectively, suggesting the extremely strong oxidizing capacity of the A-PB-g-C₃N₄/PMS/Vis system. Synergistic effect between the decorated A-PB and the g-C₃N₄ substrate promoted the Fe(III)/Fe(II) redox cycling and facilitated the charge transfer at the A-PB/g-C₃N₄ heterojunction interface. As a result, both photocatalysis and heterogeneous activation of PMS were boosted in the A-PB-g-C₃N₄/PMS/Vis system, leading to the production of large amount of reactive oxygen species (ROS). The various ROS (SO₄^•-, HO•, •O₂^- and ¹O₂) was responsible for the ultrafast degradation of BPA. Moreover, the A-PB-g-C₃N₄ catalyst also exhibited outstanding reusability and stability, retaining 98.9% of the removal percentage for BPA after five consecutive reaction cycles. This study suggests that the A-PB-g-C₃N₄ can be an all-rounder to bridge photocatalysis and PMS activation, and shed a new light on the application of multiple ROS for the ultrafast elimination of micropollutants from wastewater.