Facet-controlled palladium nanocrystalline for enhanced nitrate reduction towards ammonia

Laser-Induced Pd-PdO/rGO Catalysts for Enhanced Electrocatalytic Conversion of Nitrate into Ammonia

Electrochemical reduction of nitrate to ammonia (eNO3RR) is proposed as a sustainable solution for high-rate ammonia synthesis under ambient conditions. The complex, multistep eNO3RR mechanism necessitates the use of a catalyst for the complete conversion of nitrate to ammonia. Our research focuses on developing a novel Pd-PdO doped in a reduced graphene oxide (rGO) composite catalyst synthesized via a laser-assisted one-step technique. This catalyst demonstrates dual functionality: palladium (Pd) boosts hydrogen adsorption, while its oxide (PdO) demonstrates considerable nitrogen adsorption affinity and exhibits a maximum ammonia yield of 5456.4 ± 453.4 μg/h/cm2 at -0.6 V vs reversible hydrogen electrode (RHE), with significant yields for nitrite and hydroxylamine under ambient conditions in a nitrate-containing alkaline electrolyte. At a lower potential of -0.1 V, the catalyst exhibited a minimal hydrogen evolution reaction of 3.1 ± 2.2% while achieving high ammonia selectivity (74.9 ± 4.4%), with the balance for nitrite and hydroxylamine. Additionally, the catalyst's stability and activity can be regenerated through the electrooxidation of Pd.

Two-dimensional Cu Plates with Steady Fluid Fields for High-rate Nitrate Electroreduction to Ammonia and Efficient Zn-Nitrate Batteries

Nitrate electroreduction reaction (eNO3 -RR) to ammonia (NH3) provides a promising strategy for nitrogen utilization, while achieving high selectivity and durability at an industrial scale has remained challenging. Herein, we demonstrated that the performance of eNO3 -RR could be significantly boosted by introducing two-dimensional Cu plates as electrocatalysts and eliminating the general carrier gas to construct a steady fluid field. The developed eNO3 -RR setup provided superior NH3 Faradaic efficiency (FE) of 99 %, exceptional long-term electrolysis for 120 h at 200 mA cm-2, and a record-high yield rate of 3.14 mmol cm-2 h-1. Furthermore, the proposed strategy was successfully extended to the Zn-nitrate battery system, providing a power density of 12.09 mW cm-2 and NH3 FE of 85.4 %, outperforming the state-of-the-art eNO3 -RR catalysts. Coupled with the COMSOL multiphysics simulations and in situ infrared spectroscopy, the main contributor for the high-efficiency NH3 production could be the steady fluid field to timely rejuvenate the electrocatalyst surface during the electrocatalysis.

Unveiling Cutting-Edge Developments in Electrocatalytic Nitrate-to-Ammonia Conversion

The excessive enrichment of nitrate in the environment can be converted into ammonia (NH3) through electrochemical processes, offering significant implications for modern agriculture and the potential to reduce the burden of the Haber-Bosch (HB) process while achieving environmentally friendly NH3 production. Emerging research on electrocatalytic nitrate reduction (eNitRR) to NH3 has gained considerable momentum in recent years for efficient NH3 synthesis. However, existing reviews on nitrate reduction have primarily focused on limited aspects, often lacking a comprehensive summary of catalysts, reaction systems, reaction mechanisms, and detection methods employed in nitrate reduction. This review aims to provide a timely and comprehensive analysis of the eNitRR field by integrating existing research progress and identifying current challenges. This review offers a comprehensive overview of the research progress achieved using various materials in electrochemical nitrate reduction, elucidates the underlying theoretical mechanism behind eNitRR, and discusses effective strategies based on numerous case studies to enhance the electrochemical reduction from NO3 - to NH3. Finally, this review discusses challenges and development prospects in the eNitRR field with an aim to guide design and development of large-scale sustainable nitrate reduction electrocatalysts.

Flow cytometry-based high-throughput screening of synthetic peptides for palladium adsorption

Conventionally, the measurement of metal ion adsorption capacity in biosorbent relies on expensive and time-consuming ICP-OES technique. Herein, a semi-quantitative method to measure Pd(II) adsorption capacity of single cells has been presented by analyzing side scatter (SSC) intensity in flow cytometry. Within the sensitive range and applicable conditions, excellent linearity correlation (R2 ranges from 0.89 to 0.96) between the amount of Pd(II) absorbed on yeast and the fold increase in SSC intensity has been observed. Using this method, six strains with high Pd adsorption capacities have sorted from a yeast library with metal-binding peptides displayed (up to 107 strains) based on SSC signal intensity. The optimal peptide (EF1) displayed on yeast and E. coli surface demonstrated Pd adsorption improvements of ∼32% and ∼200%, respectively. In summary, our study proposes an alternative high-throughput method for analyzing the Pd(II) adsorption capacity of individual yeast cells, enabling the screening of specific peptides/proteins with high Pd(II) affinity from extensive libraries.

Bimetallic synergistic catalysts based on two-dimensional carbon-rich conjugated frameworks for nitrate electrocatalytic reduction to ammonia: catalyst screening and mechanism insights

The discovery of the 'two birds, one stone' electrochemical nitrate reduction reaction (NO3RR) allows for the removal of harmful NO3-pollutants as well as the production of economically beneficial ammonia (NH3). However, current understanding of the catalytic mechanism of NO3RR is not enough, and this research is still challenging. To determine the mechanism needed to create efficient electrocatalysts, we thoroughly examined the catalytic activity of molybdenum-based diatomic catalysts (DACs) anchored on two-dimensional carbon-rich conjugated frameworks (2D CCFs) for NO3RR. Among the 23 candidate materials, after a four-step screening method and detailed mechanism studies, we discovered that NO3RR can efficiently generate NH3by following the N-end pathway on the MoTi-Pc, MoMn-Pc, and MoNb-Pc, with limiting potential of -0.33 V, -0.13 V, and -0.38 V, respectively. The activity of NO3RR can be attributed to the synergistic effect of the TM1-TM2dimer d orbital coupling to the anti-bonding orbital of NO3-. Additionally, high hybridization between the Mo-4d, TM-3d(4d), and NO3--2p orbitals on the MoTMs-Pc DACs can speed up the flow of electrons from the Mo-TM dual-site to NO3-. The research presented here paves the way for the reasonable design of effective NO3RR catalysts and offers a theoretical basis for experimental research.

Atomically dispersed Pd on defective BN nanosheets for nitrite electroreduction to ammonia

Electrocatalytic NO2- reduction to NH3 (NO2RR) offers a prospective strategy to concurrently achieve polluted NO2- removal and effective NH3 electrosynthesis. In this work, we report atomically dispersed Pd on defective BN nanosheets (Pd1/BN) as an efficient catalyst for the NO2RR, achieving the highest NH3-Faradaic efficiency of 91.7% with an NH3 yield rate of 347.1 μmol h-1 cm-2 at -0.6 V vs. RHE, superior to those of most previously reported electrocatalysts. Theoretical computations reveal the isolated Pd sites as catalytic centers to selectively adsorb NO2- and accelerate NO2--to-NH3 hydrogenation process with a minimized reaction barrier, eventually contributing to the considerably enhanced NO2RR selectivity and activity of Pd1/BN.

Fe-Doped CoS2 Nanoarrays: Efficient Electrocatalytic Nitrate Reduction to Ammonia under Ambient Conditions

The electrocatalytic nitrate reduction reaction (NO3 - RR) enables the reduction of nitrate to ammonium ions under ambient conditions. It was considered as an alternative reaction for the production of ammonia (NH3 ) in recent years. In this paper, we report that the Fe doping CoS2 nanoarrays can effectively catalyze the formation of NH3 from nitrate (NO3 - ) under ambient conditions. This is mainly due to the increase of the NO3 - reaction active site by Fe doping and the porous nanostructure of the catalyst, which greatly improves the catalytic activity. Specifically, at -0.9 V vs. RHE, the NH3 yield rate (RNH3 ) of Fe-CoS2 /CC is 17.8×10-2  mmol h-1  cm-2 with Faraday Efficiency (FE) of 88.93 %. Besides, such catalyst shows good durability and catalytic stability, which provides the possibility for the future application of electrocatalytic NH3 production.

Copper-Based Electrocatalysts for Nitrate Reduction to Ammonia

Ammonia (NH₃) is a highly important industrial chemical used as fuel and fertilizer. The industrial synthesis of NH₃ relies heavily on the Haber-Bosch route, which accounts for roughly 1.2% of global annual CO₂ emissions. As an alternative route, the electrosynthesis of NH₃ from nitrate anion (NO₃^-) reduction (NO₃^-RR) has drawn increasing attention, since NO₃^-RR from wastewater to produce NH₃ can not only recycle waste into treasure but also alleviate the adverse effects of excessive NO₃^- contamination in the environment. This review presents contemporary views on the state of the art in electrocatalytic NO₃^- reduction over Cu-based nanostructured materials, discusses the merits of electrocatalytic performance, and summarizes current advances in the exploration of this technology using different strategies for nanostructured-material modification. The electrocatalytic mechanism of nitrate reduction is also reviewed here, especially with regard to copper-based catalysts.

Self-Supported Pd Nanorod Arrays for High-Efficient Nitrate Electroreduction to Ammonia

Electrochemical nitrate (NO₃ ^- ) reduction to ammonia (NH₃ ) offers a promising pathway to recover NO₃ ^- pollutants from industrial wastewater that can balance the nitrogen cycle and sustainable green NH₃ production. However, the efficiency of electrocatalytic NO₃ ^- reduction to NH₃ synthesis remains low for most of electrocatalysts due to complex reaction processes and severe hydrogen precipitation reaction. Herein, high performance of nitrate reduction reaction (NO₃ ^- RR) is demonstrated on self-supported Pd nanorod arrays in porous nickel framework foam (Pd/NF). It provides a lot of active sites for H* adsorption and NO₃ ^- activation leading to a remarkable NH₃ yield rate of 1.52 mmol cm^-2  h^-1 and a Faradaic efficiency of 78% at -1.4 V versus RHE. Notably, it maintains a high NH₃ yield rate over 50 cycles in 25 h showing good stability. Remarkably, large-area Pd/NF electrode (25 cm² ) shows a NH₃ yield of 174.25 mg h^-1 , be promising candidate for large-area device for industrial application. In situ FTIR spectroscopy and density functional theory calculations analysis confirm that the enrichment effect of Pd nanorods encourages the adsorption of H species for ammonia synthesis following a hydrogenation mechanism. This work brings a useful strategy for designing NO₃ ^- RR catalysts of nanorod arrays with customizable compositions.

Heterostructured Bi2S3/MoS2 Nanoarrays for Efficient Electrocatalytic Nitrate Reduction to Ammonia Under Ambient Conditions

Developing efficient electrocatalysts to realize the nitrate reduction reaction (eNO₃^-RR) for ammonia synthesis as an alternative to the traditional Haber-Bosch production process is of great significance. Herein, the heterostructured Bi₂S₃/MoS₂ nanoarrays were successfully synthesized by Bi₂S₃ nanowires anchored on MoS₂ nanosheets. Owing to the interfacial coupling effect, both particular surface area and exposure active sites increase. Density functional theory further uncovered that the excellent activity originates from charge transfer of the interface and a low potential barrier of 0.58 eV for hydrogenation of *NO to *NOH on Bi₂S₃/MoS₂. Compared with pure Bi₂S₃ and MoS₂ catalysts, the heterostructured Bi₂S₃/MoS₂ nanoarrays exhibit a superior NH₃ yield of 15.04 × 10^-2 mmol·h^-1·cm^-2 and a Faraday efficiency of 88.4% at -0.8 V versus the reversible hydrogen electrode. This work provides a new avenue to explore advanced electrocatalysts, which is expected to shorten the distance from the practical application of the eNO₃^-RR technology.

Electroreduction of Nitrate to Ammonia on Palladium-Cobalt-Oxygen Nanowire Arrays

Developing high-efficiency electrocatalysts for the selective reduction of nitrate to valuable ammonia is of great significance. Herein, Pd-PdO-modified Co₃O₄ nanowire arrays on nickel foam (PdCoO/NF) are fabricated by a facile cation-exchange reaction. Pd and PdO can facilitate the generation of adsorbed hydrogen, and abundant oxygen vacancies can promote nitrate activation. Therefore, the PdCoO/NF exhibits a superior nitrate conversion rate (89.3%), Faradaic efficiency (88.6%), and ammonium selectivity (95.3%) at -1.3 V versus a saturated calomel electrode. The source of the produced ammonia is confirmed by ¹⁵N isotope labeling experiments and ¹H magnetic resonance. This presented synthetic method provides a powerful strategy for the preparation of nanowire arrays with controllable compositions for selective nitrate electroreduction to ammonia.

Co-NCNT nanohybrid as a highly active catalyst for the electroreduction of nitrate to ammonia

Electrocatalytic nitrate (NO₃^-) reduction has emerged as an attractive dual-function strategy to produce ammonia (NH₃) and simultaneously mitigate environmental issues. However, efficient electrocatalysts with high selectivity for NH₃ synthesis are highly desired. In this work, we report the Co-NCNT nanohybrid as a highly active electrocatalyst towards NO₃^--to-NH₃ conversion. In 0.1 M NaOH solution containing 0.1 M NO₃^-, the Co-NCNT catalyst is capable of attaining a large NH₃ yield of 5996 μg h^-1 cm^-2 and a high faradaic efficiency of 92% at -0.6 V versus reversible hydrogen electrode. Moreover, it displays excellent electrochemical stability.

Electrocatalytic nitrate reduction on rhodium sulfide compared to Pt and Rh in the presence of chloride

Chloride poisoning is a serious problem for the electrocatalytic reduction of aqueous nitrate (NO3−) and improved electrocatalysts are needed.