Dual-stimuli-responsive CuS-based micromotors for efficient photo-Fenton degradation of antibiotics

Fate and mitigation of antibiotics and antibiotic resistance genes in microbial fuel cell and coupled systems

Microbial fuel cells (MFCs), known for their low energy consumption, high efficiency, and environmental friendliness, have been widely utilized for removing antibiotics from wastewater. Compared to conventional wastewater treatment methods, MFCs produce less sludge while exhibiting superior antibiotic removal capacity, effectively reducing the spread of antibiotic resistance genes (ARGs). This study investigates 1) the mechanisms of ARGs generation and proliferation in MFCs; 2) the influencing factors on the fate and removal of antibiotics and ARGs; and 3) the fate and mitigation of ARGs in MFC and MFC-coupled systems. It is indicated that high removal efficiency of antibiotics and minimal amount of sludge production contribute the mitigation of ARGs in MFCs. Influencing factors, such as cathode potential, electrode materials, salinity, initial antibiotic concentration, and additional additives, can lead to the selection of tolerant microbial communities, thereby affecting the abundance of ARGs carried by various microbial hosts. Integrating MFCs with other wastewater treatment systems can synergistically enhance their performance, thereby improving the overall removal efficiency of ARGs. Moreover, challenges and future directions for mitigating the spread of ARGs using MFCs are suggested.

Modulating nanostructures with polyvinylpyrrolidone: Design and development of a porous, biocompatible, and pH-Stable core-shell magnetic microrobot for demonstrating drug absorption from wastewater

Increased antineoplastic drug concentrations in wastewater stem from ineffective treatment plants and increased usage. Although microrobots are promising for pollutant removal, they face hurdles in developing a superstructure with superior adsorption capabilities, biocompatibility, porosity, and pH stability. This study focused on adjusting the PVP concentration from 0.05 to 0.375 mM during synthesis to create a favorable CMOC structure for drug absorption. Lower PVP concentrations (0.05 mM) yielded a three-dimensional nanoflower structure of CaMoO4 and CuS nanostructures, whereas five-fold concentrations (0.25 mM) produced a porous structure with a dense CuS core encased in a transparent CaMoO4 shell. The magnetically movable and pH-stable COF@CMOC microrobot, achieved by attaching CMOC to cobalt ferrite (CoF) NPs, captured doxorubicin efficiently, with up to 57 % efficiency at 200 ng/mL concentration for 30 min, facilitated by electrostatic interaction, hydrogen bonding, and pore filling of DOX. The results demonstrated that DOX removal through magnetic motion showed superior performance, with an estimated improvement of 57% compared to stirring conditions (17 %). A prototype PDMS microchannel system was developed to study drug absorption and microrobot recovery. The CaMoO4 shell of the microrobots exhibited remarkable robustness, ensuring long-lasting functionality in harsh wastewater environments and improving biocompatibility while safeguarding the CuS core from degradation. Therefore, microrobots are a promising eco-friendly solution for drug extraction. These microrobots show promise for the selective removal of doxorubicin from contaminated wastewater.

Ferrocenylselenoether and its cuprous cluster modified TiO2 as visible-light photocatalyst for the synergistic transformation of N-cyclic organics and Cr(vi)

In this study, fcSe@TiO2 and [Cu2I2(fcSe)2]n@TiO2 nanosystems based on ferrocenylselenoether and its cuprous cluster were developed and characterized by X-ray photoelectron spectroscopy (XPS), high-resolution transmission electron microscopy (HR-TEM), energy dispersive X-ray spectroscopy (EDX), and electron paramagnetic resonance (EPR). Under optimized conditions, 0.2 g L-1 catalyst, 20 mM H2O2, and initial pH 7, good synergistic visible light photocatalytic tetracycline degradation and Cr(vi) reduction were achieved, with 92.1% of tetracycline and 64.5% of Cr(vi) removal efficiency within 30 minutes. Mechanistic studies revealed that the reactive species ˙OH, ˙O2-, and h+ were produced in both systems through the mutual promotion of Fenton reactions and photogenerated charge separation. The [Cu2I2(fcSe)2]n@TiO2 system additionally produced 1O2 from Cu+ and ˙O2-. The advantages of the developed nanosystems include an acidic surface microenvironment provided by Se⋯H+, resourceful product formation, tolerance of complex environments, and excellent adaptability in refractory N-cyclic organics.

Motion of magnetic motors across liquid-liquid interface

HYPOTHESIS

In a number of applications related to chemical engineering and drug delivery, magnetic nanoparticles should move through a liquid-liquid interface in the presence of surfactant molecules. However, due to the action of capillary forces, this is not always possible. The mechanism of particle motion through the interface essentially depends on the intensity of the Marangoni flow, which is induced on the interface during its deformation.

EXPERIMENTS

In this paper we study the motion of nanoparticles Fe3O4 through the water-tridecane interface under the action of a nonuniform magnetic field when using different surfactants.

FINDINGS

If the linear size of the magnetic motor turns out to be less than a certain critical value, then it is not able to move between phases due to the action of capillary forces on the interface. Depending on the type and concentration of the surfactant used, various mechanisms for the motor motion through the liquid-liquid interface can be carried out. In one of them, a liquid phase is transferred through the interface along with a movable motor, while in the other, it is not.

Eliminating waste with waste: transforming spent coffee grounds into microrobots for water treatment

Water pollutants such as oil spills, industrial dyes, and microplastics threaten public health and aquatic ecosystems. There are considerable challenges in removing water contaminants using traditional methods. Several studies have been conducted in recent years to develop effective water purification materials. Despite this, the mass production of most materials is extremely challenging because they involve multiple intricate steps and sophisticated equipment. Herein, we report the facile synthesis of spent coffee ground (SCG)-derived magnetic microrobots, which we dub "CoffeeBots", to remove oil, organic dyes, and microplastic pollution from contaminated seawater. In order to meet eco-friendly, high-yield and low-cost requirements, iron oxide nanoparticles (IONPs) were deposited on biodegradable SCGs using green chemistry. The IONPs on CoffeeBots facilitate magnetic navigation and recycling, microswarm assembly, and ease of retrieval after water remediation tasks. CoffeeBots' intrinsic surface hydrophobicity enables efficient on-the-fly capture and removal of oil droplets and microplastics from contaminated water with remote magnetic guidance. CoffeeBots were also functionalized with ascorbic acid (AA@CoffeeBots) to remove methylene blue (MB) dye contaminants from polluted seawater. SCGs and AA act as bioadsorbent and reducing agent, respectively, for MB dye removal whereas magnetic propulsion enhances mixing and accelerates MB decolorization. These CoffeeBots can be recycled numerous times for removing oil spills, organic dyes, and microplastics from the seawater. CoffeeBots hold considerable potential as sustainable, recyclable, and low-cost remediation agents for water treatment in the near future.

Hierarchical hollow α-Fe2O3/ZnFe2O4/Mn2O3 Janus micromotors as dynamic and efficient microcleaners for enhanced photo-Fenton elimination of organic pollutants

Micro/nanomotors that can promote mass transport have attracted more and more research concern in the photocatalysis field. Here we first report a newly-designed hierarchical α-Fe2O3/ZnFe2O4/Mn2O3 magnetic micromotor as a heterogeneous photocatalyst for the degradation of cationic dye methylene blue (MB) from wastewater. The resulting three-dimensional (3D) flower-like hollow Janus micromotors are fabricated through a green and scalable strategy, in which each component has different functions. ZnFe2O4 microspheres serve as a magnetic scaffold for the nucleation and growth of α-Fe2O3 nanosheets and for the recycling of the micromachine. α-Fe2O3 nanosheets have shown great potential as an ideal semiconductor material for the photocatalytic decontamination of pollutants. Mn2O3 nanoparticles are mainly utilized as a catalyst to produce O2 bubbles to propel the autonomic movement of the micromotors in the presence of H2O2 fuel and also as a Fenton-like catalyst to decompose H2O2 to generate reactive oxygen species. Furthermore, the resultant micromotors exhibited linear-like motion form with an average speed of 189.1 μm s-1 in 5 wt% H2O2 solution. Moreover, the self-driven micromotors exhibited a superior catalytic degradation property toward MB, which was attributed to the synergistic effect of heterogeneous photocatalyst and the boosted micro-mixing and mass transfer caused by the vigorous motion of the micro-actuator. The possible degradation intermediates and passways of MB by α-Fe2O3/ZnFe2O4/Mn2O3 micromotor were identified with time of flight mass spectroscopy (TOF-MS). The 3D Janus micromotors have the potential to be used as a high-efficiency and active heterogeneous photocatalyst for the degradation of organic pollutants.

Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO₃^2- increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO₃^2-, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min^-1, being 685% greater than that in the absence of CO₃^2- (0.315 min^-1). The comparison of dominated active species and 4-MP degradation pathways in both CO₃^2--free and CO₃^2--containing systems suggested that more CO₃•^-/¹O₂ was produced in the case of CO₃^2-deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO₃^2- enabled the effective reduction of Cu²⁺ to Cu⁺. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σ_p of the aromatic phenolics and the logarithm of k in the CO₃^2--containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.

Confined Tri-Functional FeOx @MnO2 @SiO2 Flask Micromotors for Long-Lasting Motion and Catalytic Reactions

H₂ O₂ -fueled micromotors are state-of-the-art mobile microreactors in environmental remediation. In this work, a magnetic FeO_x @MnO₂ @SiO₂ micromotor with multi-functions is designed and demonstrated its catalytic performance in H₂ O₂ /peroxymonosulfate (PMS) activation for simultaneously sustained motion and organic degradation. Moreover, this work reveals the correlations between catalytic efficiency and motion behavior/mechanism. The inner magnetic FeO_x nanoellipsoids primarily trigger radical species (^• OH and O₂ ^•- ) to attack organics via Fenton-like reactions. The coated MnO₂ layers on FeO_x surface are responsible for decomposing H₂ O₂ into O₂ bubbles to provide a propelling torque in the solution and generating SO₄ ^•- and ^• OH for organic degradation. The outer SiO₂ microcapsules with a hollow head and tail result in an asymmetrical Janus structure for the motion, driven by O₂ bubbles ejecting from the inner cavity via the opening tail. Intriguingly, PMS adjusts the local environment to control over-violent O₂ formation from H₂ O₂ decomposition by occupying the Mn sites via inter-sphere interactions and enhances organic removal due to the strengthened contacts and Fenton-like reactions between inner FeO_x and peroxides within the microreactor. The findings will advance the design of functional micromotors and the knowledge of micromotor-based remediation with controlled motion and high-efficiency oxidation using multiple peroxides.

From Fenton and ORR 2e−-Type Catalysts to Bifunctional Electrodes for Environmental Remediation Using the Electro-Fenton Process

Currently, the presence of emerging contaminants in water sources has raised concerns worldwide due to low rates of mineralization, and in some cases, zero levels of degradation through conventional treatment methods. For these reasons, researchers in the field are focused on the use of advanced oxidation processes (AOPs) as a powerful tool for the degradation of persistent pollutants. These AOPs are based mainly on the in-situ production of hydroxyl radicals (OH•) generated from an oxidizing agent (H2O2 or O2) in the presence of a catalyst. Among the most studied AOPs, the Fenton reaction stands out due to its operational simplicity and good levels of degradation for a wide range of emerging contaminants. However, it has some limitations such as the storage and handling of H2O2. Therefore, the use of the electro-Fenton (EF) process has been proposed in which H2O2 is generated in situ by the action of the oxygen reduction reaction (ORR). However, it is important to mention that the ORR is given by two routes, by two or four electrons, which results in the products of H2O2 and H2O, respectively. For this reason, current efforts seek to increase the selectivity of ORR catalysts toward the 2e− route and thus improve the performance of the EF process. This work reviews catalysts for the Fenton reaction, ORR 2e− catalysts, and presents a short review of some proposed catalysts with bifunctional activity for ORR 2e− and Fenton processes. Finally, the most important factors for electro-Fenton dual catalysts to obtain high catalytic activity in both Fenton and ORR 2e− processes are summarized.

Establishment of a novel system for photothermal removal of ampicillin under near-infrared irradiation: Persulfate activation, mechanism, pathways and bio-toxicology

One of the most effective ways to address the problems of low solar spectrum utilization in photocatalysis and the high cost of persulfate activation technology is to create a cost-effective synergistic photothermal persulfate system. In this work, a brand-new composite catalyst called ZnFe₂O₄/Fe₃O₄@MWCNTs (ZFC) was developed to activate PDS (K₂S₂O₈) from the aforementioned basis. ZFC's surface temperature could unbelievably reach 120.6 °C in 150 s together with the degrading synergistic system solution temperature could reach 48 °C under near-infrared light (NIR) in 30 min, thus accelerating the ZFC/PDS decolorization rate for reactive blue KN-R (150 mg/L) to 95% in 60 min. Furthermore, the ZFC's ferromagnetism bore it with good cycling performance, allowing it to maintain an 85% decolorization rate even after 5 cycles with OH·, SO₄^-·, ¹O₂, and O₂^-· dominating the degrading process. In the meantime, the DFT calculations of the kinetic constants for the entire process of S₂O₈^2- adsorption on Fe₃O₄ in dye degradation solution were in agreement with the outcomes of the experimental pseudo-first-order kinetic fitting. By analyzing the particular degradation route of ampicillin (50 mg/L) and the possible environmental impact of the intermediate using LC-MS and the toxicological analysis software (T.E.S.T.), respectively, it was shown that this system might function as an environmentally friendly method for removing antibiotics. This work may provide some productive research lines for the creation of a photothermal persulfate synergistic system and suggest fresh approaches to water treatment technology.

Smart micro- and nanorobots for water purification

Less than 1% of Earth's freshwater reserves is accessible. Industrialization, population growth and climate change are further exacerbating clean water shortage. Current water-remediation treatments fail to remove most pollutants completely or release toxic by-products into the environment. The use of self-propelled programmable micro- and nanoscale synthetic robots is a promising alternative way to improve water monitoring and remediation by overcoming diffusion-limited reactions and promoting interactions with target pollutants, including nano- and microplastics, persistent organic pollutants, heavy metals, oils and pathogenic microorganisms. This Review introduces the evolution of passive micro- and nanomaterials through active micro- and nanomotors and into advanced intelligent micro- and nanorobots in terms of motion ability, multifunctionality, adaptive response, swarming and mutual communication. After describing removal and degradation strategies, we present the most relevant improvements in water treatment, highlighting the design aspects necessary to improve remediation efficiency for specific contaminants. Finally, open challenges and future directions are discussed for the real-world application of smart micro- and nanorobots.

3D hierarchical LDHs-based Janus micro-actuator for detection and degradation of catechol

Micro/nanomotors that combine the miniaturization and autonomous motion have attracted much research interest for environmental monitoring and water remediation. However, it is still challenging to develop a facile route to produce bifunctional micromotors that can simultaneously detect and remove organic pollutants from water. Herein, we developed a novel Janus micromotor with robust peroxide-like activity for simultaneously colorimetric detection and removal of catechol from water. Such laccase (Lac) functionalized Janus micromotor consisted of calcined MgAl-layered double hydroxides (MgAl-CLDHs) nanosheets and Co₃O₄-C nanoparticles (Lac-MgAl-CLDHs/Co₃O₄-C), revealing unique 3D hierarchical microstructure with highly exposed active sites. The obtained Janus micromotors exhibited autonomous motion with a maximum velocity of 171.83 ± 4.07 µm/s in the presence of 7 wt% H₂O₂ via a chemical propulsion mechanism based on the decomposition of H₂O₂ by Co₃O₄-C layer on the hemisphere surface of Janus micromotors. Owing to the combination of autonomous motion and high peroxide-like activity, Lac-MgAl-CLDHs/Co₃O₄-C Janus micromotors could sensitively detect catechol with the limit of detection of 0.24 μM. In addition, such Janus micromotors also could quickly degrade catechol by •OH generated from a Fenton-like reaction. It is a first step towards using autonomous micromotors for highly selective, sensitive, and facile detection and quick removal of catechol from water.

Light-driven Au-ZnO nanorod motors for enhanced photocatalytic degradation of tetracycline

The abuse of antibiotics in human medicine and animal husbandry leads to the enrichment of antibiotic residues in aquatic environments, which has been a major problem of environmental pollution over the past decades. Therefore, it is urgent to develop a highly efficient approach to remove antibiotics from aquatic environments. Inspired by the motion characteristics of semiconductor-based micro-/nanomotors, a light-driven Au-ZnO nanomotor system based on vertically aligned ZnO arrays is successfully developed for the enhanced photocatalytic degradation of tetracycline (TC). Under UV light (λ = 365 nm) illumination, these Au-ZnO nanomotors exhibit a high speed in deionized water and TC solution. Due to their efficient motion capability and Au-enhanced charge separation, these light-driven Au-ZnO nanomotors removed almost all TC (40 mg L^-1) within 30 min and displayed stable photocatalytic activity for four cycles without any apparent deactivation. The as-developed motor-based strategy for enhanced antibiotic degradation has excellent potential in environmental governance.

Motion of a chemically reactive bimetal motor in a magnetic field

The wide research interest in nano-, micro-, and macromotors is due to the diverse range of applied problems in engineering, biomedicine, and ecology. At the same time, the amount of known mechanisms responsible for the locomotion of motors is limited. Here, we demonstrate a novel method of motor locomotion, which can be contingently called "chemical magnetism". The phenomenon considered here is based on the fact that any current loop in the magnetic field is affected by a force. "Chemical magnet" represents a bimetal surfer swimming at the electrolyte surface. When the redox reaction proceeds, a current loop emerges. That defines the action of the additional magnetic force on the surfer in the non-uniform magnetic field. The magnetic properties of the surfer can be varied in a wide range by changing the concentration of the electrolyte solution, its temperature, and the pair of metals composing the surfer. The phenomenon of "chemical magnetism" considered here widens a list of known mechanisms of motor locomotion.

Propulsion, deformation, and confinement response of hollow nanocellulose millimotors

HYPOTHESIS

Micromotor and nanomotor particles are typically made using dense solid particles that can sediment or be trapped in confined flow environments. Creation of much larger motors should be possible if a very low-density system is used with sufficient strength to carry liquid and still experience propulsive motion. Light, dense millimotors should also be able to deform more than dense solid ones in constrictions.

EXPERIMENTS

Millimotors are created from permeable capsules of bacterial cellulose that are coated with catalse-containing metal-organic frameworks, enabling reactive propulsion in aqueous hydrogen peroxide. The motion of the motors is quantified using particle tracking and the deformation is measured using microcapillary compression and flow through confined channels.

FINDINGS

Two different propulsion mechanisms are dominant depending on the motor surface chemistry: oxygen bubbles are expelled from hydrophilic millimotors, driving motion via recoil force and buoyancy. Hydrophobic millimotors remain attached to growing bubbles and move by buoyancy alone. Despite their large size, the low-density capsules compress to pass through contractions that would impede and be blocked by solid motors. The sparse structure but relatively large size of the motors enables them to transport significant volumes of liquid using minimal solid mass as a motor support structure.

Gas generation due to photocatalysis as a method to reduce the resistance force in the process of motors motion at the air-liquid interface

HYPOTHESIS

The problem of the development of miniature motors able to move on the air-liquid interface at low Reynolds numbers is a crucial challenge due to dominating role of viscous force. To solve this problem the chemical generation of gas can be used. Generated gas pushes liquid out from the surfer surface, so the resistance force is reduced.

EXPERIMENTS

Surfer composed of TiO₂ nanoparticles and ferromagnetic cobalt microparticles moves at the interface of an aqueous solution of hydrogen peroxide under the action of magnetic force. After irradiation with UV or visible light, the gas cavern is formed at the surfer surface due to photo-catalytic decomposition of hydrogen peroxide. As a result, the area of surfer contact with liquid is reduced.

FINDINGS

The resistance force acting on the surfer is reduced due to the liquid pushing out from the surfer surface. This effect is strengthened with the increase in the intensity of gas generation. The resistance force is increased when increasing the liquid viscosity or using a surfactant. The proposed method allows control of the velocity of the motors in a rather wide range by changing the gradient of the magnetic field and parameters of light.

Micromotor-in-Sponge Platform for Multicycle Large-Volume Degradation of Organic Pollutants

The presence of organic pollutants in the environment is a global threat to human health and ecosystems due to their bioaccumulation and long-term persistence. Hereby a micromotor-in-sponge concept is presented that aims not only at pollutant removal, but towards an efficient in situ degradation by exploiting the synergy between the sponge hydrophobic nature and the rapid pollutant degradation promoted by the cobalt-ferrite (CFO) micromotors embedded at the sponge's core. Such a platform allows the use of extremely low fuel concentration (0.13% H₂ O₂ ), as well as its reusability and easy recovery. Moreover, the authors demonstrate an efficient multicycle pollutant degradation and treatment of large volumes (1 L in 15 min) by using multiple sponges. Such a fast degradation process is due to the CFO bubble-propulsion motion mechanism, which induces both an enhanced fluid mixing within the sponge and an outward flow that allows a rapid fluid exchange. Also, the magnetic control of the system is demonstrated, guiding the sponge position during the degradation process. The micromotor-in-sponge configuration can be extrapolated to other catalytic micromotors, establishing an alternative platform for an easier implementation and recovery of micromotors in real environmental applications.

Reconfigurable assembly of colloidal motors towards interactive soft materials and systems

Due to the highly flexible reconfiguration of swarms, collective behaviors have provided various natural organisms with a powerful adaptivity to the complex environment. To mimic these natural systems and construct artificial intelligent soft materials, self-propelled colloidal motors that can convert diverse forms of energy into swimming-like movement in fluids afford an ideal model system at the micro-/nanoscales. Through the coupling of local gradient fields, colloidal motors driven by chemical reactions or externally physical fields can assembly into swarms with adaptivity. Here, we summarize the progress on reconfigurable assembly of colloidal motors which is driven and modulated by chemical reactions and external fields (e.g., light, ultrasonic, electric, and magnetic fields). The adaptive reconfiguration behaviors and the corresponding mechanisms are discussed in detail. The future directions and challenges are also addressed for developing colloidal motor-based interactive soft matter materials and systems with adaptation and interactive functions comparable to that of natural systems.

Magnetic Nanomotors in Emulsions for Locomotion of Microdroplets

The locomotion of droplets in emulsions is of practical significance for fields related to medicine and chemical engineering, which can be done with a magnetic field to move droplets containing magnetic materials. Here, we demonstrate a new method of droplet locomotion in the oil-in-water emulsion with the help of a nonuniform magnetic field in the case where magnetic nanoparticles (MNPs) are dispersed in the continuous phase of the emulsion. The paper analyses the motion of the droplets in a liquid film and in a capillary for various diameters of droplets, their number density, and viscosity of the continuous phase of the emulsion. It is established that the mechanism of droplet locomotion in the emulsion largely depends on the wettability of MNPs. Hydrophobic nanoparticles are adsorbed on the droplet surfaces, forming the agglomerates of MNPs with the droplets. Such agglomerates move at much higher velocities than passive droplets. Hydrophilic nanoparticles are not adsorbed at the surfaces of the droplets but form mobile magnetic clusters dispersed in the continuous phase of the emulsion. Mobile magnetic clusters set the surrounding liquid and droplets in motion. The results obtained in this paper can be used in drug delivery.

Photosensitive Polymeric Janus Micromotor for Enzymatic Activity Protection and Enhanced Substrate Degradation

Immobilizing enzymes into microcarriers is a strategy to improve their long-term stability and reusability, hindered by (UV) light irradiation. However, in such approaches, enzyme-substrate interaction is mediated by diffusion, often at slow kinetics. In contrast, enzyme-linked self-propelled motors can accelerate this interaction, frequently mediated by the convection mechanism. This work reports on a new photosensitive polymeric Janus micromotor (JM) for UV-light protection of enzymatic activity and efficient degradation of substrates accelerated by the JMs. The JMs were assembled with UV-photosensitive modified chitosan, co-encapsulating fluorescent-labeled proteins and enzymes as models and magnetite and platinum nanoparticles for magnetic and catalytic motion. The JMs absorbed UV light, protecting the enzymatic activity and accelerating the enzyme-substrate degradation by magnetic/catalytic motion. Immobilizing proteins in photosensitive JMs is a promising strategy to improve the enzyme's stability and hasten the kinetics of substrate degradation, thereby enhancing the enzymatic process's efficiency.

Photothermal Catalytic Degradation of Lomefloxacin with Nano Au/TiO2

With the fast development of intensive poultry and aquaculture, the consumption of antibiotics has ever been increasing. Absorbed or metabolized antibiotics usually enter the water environment in the form of active drugs and metabolites, which can enhance the resistance of pathogenic microorganisms and even cause serious water pollution. Considering the bacteriostatic activity of antibiotics, the main biological method used to treat organic waste water has limited efficiency. Herein, we prepared Au/TiO2 for the efficient photocatalytic degradation of lomefloxacin (LOM) antibiotic wastewater. Based on the characteristics of prepared Au/TiO2, the short–wavelength light can be converted into photogenerated carriers with TiO2 support and the long–wavelength light can be converted into heat, likely due to the localized surface plasmon resonance effect of Au, synergistically promoting the LOM degradation. This study not only demonstrates that Au/TiO2 is an efficient photocatalyst for LOM degradation, but also further indicates the effectiveness of photocatalytic technology in the treatment of antibiotic wastewater.

An immunoassay based on nanomotor-assisted electrochemical response for the detection of immunoglobulin

An immunoassay strategy has been developed based on nanomotor-assisted electrochemical measurements for simple and sensitive detection of immunoglobulin (IgG). The self-propelled Fe₃O₄@SiO₂/Pt nanomotors were designed to label primary antibodies IgG (nanomotor-label) for the "on-the-fly" binding of the immune-protein. The core shell Au@Ag nanocubes (Au@Ag NCs) were used as labels of secondary antibodies (Au@Ag NCs-Ab₂) to amplify electrochemical signal related to antigen concentration derived from the oxidation of Ag. The self-propelled nanomotors autonomously move in the solution to cruise and capture IgG and Au@Ag NCs-Ab₂, resulting in the self-assembly of sandwich immune-complex. Finally, the immune-complex with magnetism can be transferred and modified on the electrode for the detection of IgG via differential pulse voltammetry. The self-propelled motion of the nanomotor-label obviates common procedures for the self-assembly of sandwich immunosensors to achieve satisfactory analysis results. With advantages of automation and miniaturization, the strategy based on self-propelled nanomotor-labels explores an effective method for the simple and sensitive detection of immune-protein in biosensing.

Bubble-propelled plasmon-reinforced Pt-ZnIn2S4 micromotors for stirring-free photocatalytic water purification

With a combination of photocatalysts, plasmonic metal NPs, and strong motion ability, mass-produced bubble-propelled Pt-ZnIn2S4 micromotors presented the potential for replacing conventional mechanical stirring in photocatalytic water purification.

Constructing electrostatic self-assembled ultrathin porous red 2D g-C3N4/Fe2N Schottky catalyst for high-efficiency tetracycline removal in photo-Fenton-like processes

The traditional heterogeneous photo-Fenton reaction was mainly restricted by the fewer surface-active sites, low Fe³⁺/Fe²⁺ transformation and H₂O₂ activation efficiency of catalyst. This work designed and fabricated the efficient photo-Fenton Schottky catalysts via a facile electrostatic self-assembly of metallic Fe₂N nanoparticles scattering on the surface of red g-C₃N₄ (ultrathin porous oxygen-doped 2D g-C₃N₄ nanosheets). The porous morphology and exceptional electrical structure of red g-C₃N₄ endowed more active sites and facilitated the photoexcited charge separation. Benefitting from the Schottky effect and unique dimensional coupling structure, the strong visible light absorption and fast spatial charge transfer were realized in the Schottky junction system. More strikingly, Fe₂N as an efficient co-catalyst was in favor of the trap and export of e^-, leading to the Fe³⁺/Fe²⁺ transformation and H₂O₂ activation during the photo-Fenton process. Accordingly, the as-prepared catalysts revealed outstanding activity in photo-Fenton like degradation of tetracycline (TC) although under 5 W white LED light irradiation. Furthermore, the reasonable degradation pathway of TC and corresponding toxicity of the intermediates, as well as the photo-Fenton catalytic mechanism were interpreted and discussed in detail. This study would be a great aid in the development of various Schottky catalysts for heterogeneous photo-Fenton-based environmental remediation systems.