Indium sulfide deposited MIL-53(Fe) microrods: Efficient visible-light-driven photocatalytic reduction of hexavalent chromium

Enhancing Photoreduction of Cr(VI) through a Multivalent Manganese(II)-Organic Framework Incorporating Anthracene Moieties

Exploiting a photocatalyst with high stability and excellent activity for Cr(VI) reduction under mild conditions is crucial yet challenging. Herein, the rigid aromatic multicarboxylate ligand with chromophore anthracene was selected to coordinate with multivalent metal ion manganese and to obtain a stable two-dimensional (2D) Mn-based metal-organic framework (MOF), LCUH-120, which can efficiently and quickly convert Cr(VI) into Cr(III) under light without the need for any additional photosensitizer. The efficient photosensitive anthracene group serves as a photosensitizer center and multivalent Mn(II) ion as a photocatalyst center in LCUH-120, and the conversion of Cr(VI) to Cr(III) can be realized completely in just 40 min. Specifically, the rate constant (k) and reduction rate of the Cr(VI) photocatalytic reaction can be high up to 0.134 min-1 and 2.50 mgCr(VI) g-1cata min-1 in an acidic environment (pH = 2), respectively. Compared to our previously reported three-dimensional (3D) Sm-MOF, LCUH-120 exhibits a significantly higher catalytic reaction rate, which might be ascribed to the fact that the photocatalyst center Mn node can improve the rate of electron transfer and promote the separation of holes and photogenerated electrons. In an acidic environment, the reaction mechanism can be verified through various contrast experiments and theoretical simulations.

Enhanced photoreduction efficiency of Cr(VI) driven by visible light in a new Zr-based metal-organic framework modified by hydroxyl groups

While metal-organic framework (MOF) photocatalysts have demonstrated a unique Cr(VI) photoreduction capability in recent decades, their performance is still insufficient for practical applications because of their low Cr(VI) uptake and poor visible light response. To cope with these drawbacks, a new OH-modified Zr-based MOF, termed HCMUE-1, was successfully prepared via a solvothermal method in this work. The complete characterization of HCMUE-1 was performed through various techniques, including powder X-ray diffraction (PXRD), Raman spectroscopy, Fourier transform infrared (FT-IR), thermogravimetric analysis and differential scanning calorimetry (TGA-DSC), scanning electron microscopy combined with energy-dispersive X-ray (SEM-EDX), and X-ray photoelectron spectroscopy (XPS). The obtained data exhibited the excellent Cr(VI) photoreduction efficiency of HCMUE-1, reaching up to 98% after 90 min and almost 100% after 120 min under visible light illumination in a low acidic medium. Noteworthily, HCMUE-1 retained the same Cr(VI) removal rate for at least seven cycles without considerable loss. Further experimental investigations demonstrated that the structural stability and surface morphology of HCMUE-1 were retained after photoreduction. Moreover, the photocatalytic reduction mechanism of Cr(VI) to Cr(III) was interpreted through a series of systematic experimental measurements. These results indicate that HCMUE-1 possesses potential as an efficient photocatalyst for reducing toxic Cr(VI) species from wastewater in real-life conditions.

In situ synthesis of oxygen-doped carbon quantum dots embedded in MIL-53(Fe) for efficient degradation of oxytetracycline

Introducing carbon quantum dots (CQDs) into photocatalysts is believed to boost the charge transfer rate and reduce charge complexation. Doping heteroatoms such as N, S, or P enable CQDs to have an uplifting electron transfer capability. However, the application of oxygen-doped CQDs to improve the performance of photocatalysts has rarely been reported. Herein, a type of carbon-oxygen quantum dots (COQDs) was in situ embedded into MIL-53(Fe) to aid peroxydisulfate (PDS)-activated degradation of oxytetracycline (OTC) under visible light irradiation. The successful embedding of COQDs was confirmed by XRD, FT-IR, XPS, SEM, and TEM techniques. Photoelectrochemical testing confirmed its better performance. The prepared COQDs1/MIL-53(Fe) showed 88.2% decomposition efficiency of OTC in 60 min, which was 1.45 times higher than that of pure MIL-53(Fe). In addition, the performance of the material was tested at different pH, OTC concentrations, catalyst dosing, and PDS dosing. It was also subjected to cyclic testing to check stability. Moreover, free radical trapping experiments and electron paramagnetic resonance were conducted to explore the possible OTC deterioration mechanism. Our work provides a new idea for the development of MOFs for water treatment and remediation.

New Insights into Antioxidant Peptides: An Overview of Efficient Screening, Evaluation Models, Molecular Mechanisms, and Applications

Antioxidant peptides are currently a hotspot in food science, pharmaceuticals, and cosmetics. In different fields, the screening, activity evaluation, mechanisms, and applications of antioxidant peptides are the pivotal areas of research. Among these topics, the efficient screening of antioxidant peptides stands at the forefront of cutting-edge research. To this end, efficient screening with novel technologies has significantly accelerated the research process, gradually replacing the traditional approach. After the novel antioxidant peptides are screened and identified, a time-consuming activity evaluation is another indispensable procedure, especially in in vivo models. Cellular and rodent models have been widely used for activity evaluation, whilst non-rodent models provide an efficient solution, even with the potential for high-throughput screening. Meanwhile, further research of molecular mechanisms can elucidate the essence underlying the activity, which is related to several signaling pathways, including Keap1-Nrf2/ARE, mitochondria-dependent apoptosis, TGF-β/SMAD, AMPK/SIRT1/PGC-1α, PI3K/Akt/mTOR, and NF-κB. Last but not least, antioxidant peptides have broad applications in food manufacture, therapy, and the cosmetics industry, which requires a systematic review. This review introduces novel technologies for the efficient screening of antioxidant peptides, categorized with a new vision. A wide range of activity evaluation assays, encompassing cellular models, as well as rodent and non-rodent models, are provided in a comprehensive manner. In addition, recent advances in molecular mechanisms are analyzed with specific cases. Finally, the applications of antioxidant peptides in food production, therapy, and cosmetics are systematically reviewed.

Multifunctional In-MOF and Its S-Scheme Heterojunction toward Pollutant Decontamination via Fluorescence Detection, Physical Adsorption, and Photocatalytic REDOX

A novel doubly interpenetrated indium-organic framework of 1 has been assembled by In3+ ions and highly conjugated biquinoline carboxylate-based bitopic connectors (H2L). The isolated 1 exhibits an anionic framework possessing channel-type apertures repleted with exposed quinoline N atoms and carboxyl O atoms. Owing to the unique architecture, 1 displays a durable photoluminescence effect and fluorescence quenching sensing toward CrO42-, Cr2O72-, and Cu2+ ions with reliable selectivity and anti-interference properties, fairly high detection sensitivity, and rather low detection limits. Ligand-to-ligand charge transition (LLCT) was identified as the essential cause of luminescence by modeling the ground state and excited states of 1 using DFT and TD-DFT. In addition, the negatively charged framework has the ability to rapidly capture single cationic MB, BR14, or BY24 and their mixture, including the talent to trap MB from the (MB + MO) system with high selectivity. Moreover, intrinsic light absorption capacity and band structure feature endow 1 with effective photocatalytic decomposition ability toward reactive dyes RR2 and RB13 under ultraviolet light. Notably, after further polishing the band structure state of 1 by constructing the S-scheme heterojunction of In2S3/1, highly efficient photocatalytic detoxification of Cr(VI) and degradation of reactive dyes have been fully achieved under visible light. This finding may open a new avenue for designing novel multifunctional MOF-based platforms to address some intractable environmental issues, i.e., detection of heavy metal ions, physical capture of pony-sized dyes, and photochemical decontamination of ultrastubborn reactive dyes and highly toxic Cr(VI) ions from water.

Rapid photocatalytic reduction of hexavalent chromium over Z-scheme MgIn2S4/BiPO4 heterojunction: Performance, DFT calculation and mechanism insight

The accumulation of highly fluid and biotoxic hexavalent chromium (Cr(VI)) impairs water ecosystems. It is urgent to quickly reduce Cr (VI) to trivalent chromium (Cr (III)) in wastewater. Hereby, Z-scheme MgIn₂S₄/BiPO₄ heterojunction was prepared, and MB-30 (mass ratio of BiPO₄ to composite) presented a rapid Cr(VI) (10 mg L^-1) removal efficiency of 100% within 10 min, its kinetic rate constant was 9.0 and 30.1 folds that of MgIn₂S₄ and BiPO₄, respectively. After four rounds, MB-30 maintained a high removal rate of 93.18% and stabilized crystal texture. First-principles calculations revealed that the formation of Z-scheme heterojunction could ameliorate charge generation, detachment, migration capability, and light utilization. Meanwhile, the coupling of S and O in the two components produced a tight S-O bond, which acted as an atomic-level access to promote carrier migration. The findings were consistent with the structure superiority and optical and electronic properties of MB-30. The Z-scheme pattern was substantiated based on multifarious experiments, which exhibited an elevated reduction potential while emphasizing the significance of interfacial chemical bond and the internal electric field (IEF) on carrier detachment and migration.

Introducing anthracene and amino groups into Ln-OFs for the photoreduction of Cr(vi) without additional photosensitizers or cocatalysts

The stable LCUH-100 was designed and synthesized, by incorporating chromophores into lanthanide MOFs, as a high-efficiency photocatalyst, which can rapidly and efficiently reduce Cr(vi) under visible-light irradiation and has good cycle stability.

RhB-Embedded Zirconium-Biquinoline-Based MOF Composite for Highly Sensitive Probing Cr(VI) and Photochemical Removal of CrO42-, Cr2O72-, and MO

How to accurately detect and efficiently sweep Cr(VI) from contaminated water has come into focus. Zirconium-based metal-organic frameworks (MOFs) play vital roles in water environmental chemistry due to excellent hydrolysis-resistant stability. However, as photochemical probes and photocatalysts, poor performances in detection sensitivity, selectivity, and photosensitiveness limit sole Zr-MOFs' applications. So, it is urgent to quest valid strategies to break through the dilemmas. Embedding luminous dyes into MOFs has been considered one of the most feasible avenues. Herein, a dual-emissive RhB@Zr-MOF with orange-yellow fluorescence has been assembled by in situ-encapsulating rhodamine B (RhB) into a zirconium-biquinoline-based MOF. Actually, within RhB@Zr-MOF, the aggregation fluorescence quenching (ACQ) effect of RhB molecules was effectively avoided. Notably, RhB@Zr-MOF exhibits a rapid fluorescence quenching response toward Cr(VI) ions with high selectivity, sensitivity, and anti-interference abilities. More interestingly, unlike the most widely reported fluorescence resonance energy transfer (FRET) between MOFs and encapsulated guest modules, photoinduced electron transfer from RhB to Zr-MOF has been confirmed by modeling the ground state and excited states of RhB@Zr-MOF using density functional theory (DFT) and time-dependent DFT (TD-DFT). The effective electron transfer makes RhB@Zr-MOF more sensitive in probing Cr₂O₇^2- and CrO₄^2- ions with ultralow detection limit (DL) values of 6.27 and 5.26 ppb, respectively. Prominently, the detection sensitivity based on DL values has been increased about 6 and 9 times, respectively, compared with pristine Zr-MOF. Moreover, rather negative CB and positive VB potentials make RhB@Zr-MOF have excellent photochemical scavenging ability toward Cr(VI) and MO.

Enhanced Photocatalytic Removal of Hexavalent Chromium over Bi12TiO20/RGO Polyhedral Microstructure Photocatalysts

A Bi₁₂TiO₂₀/RGO photocatalyst with polyhedron microstructure was fabricated via the template-free hydrothermal method, and the visible-light-induced photocatalytic activity of the prepared Bi₁₂TiO₂₀ was also evaluated by the photocatalytic reduction of heavy metal pollutants. The structures and optical properties of the prepared Bi₁₂TiO₂₀/RGO were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and UV–vis diffuse reflectance spectrum (UV–vis DRS). The effects of the reaction time and mineralizer concentration on the formation of the Bi₁₂TiO₂₀ polyhedral microstructure were analyzed. The enhanced photocatalytic performances of Bi₁₂TiO₂₀/RGO were observed which were ascribed to the combination of the Bi₁₂TiO₂₀ microstructure induced photogenerated charges and the RGO nanostructure as a photogenerated charges carrier. The effect of organic acids, p-hydroxybenzoic acid (PHBA), chloroacetic acid, and citric acid on the Cr(VI) photocatalytic reduction was also discussed. This work provides an insight into the design of the bismuth-based microstructure photocatalyst towards the application for environment purification of heavy metals.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

Application of polymer-coated Macadamia integrifolia nutshell biomass impregnated with palladium for chromium(VI) remediation

Freely suspended and porous basket restrained granules of palladium nanoparticles supported on polymer-grafted Macadamia nutshell biomass (Pd@Polym-MNS) composite were used for the treatment chromium(VI)-containing water. In the presence of formic acid, the Pd@Polym-MNS demonstrated its activity in the adsorption-reduction-based conversion of noxious chromium(VI) to less toxic chromium(III) with a low activation energy of 13.4 kJ mol-1, ΔH0 (+ 10.8 kJ mol-1), ΔS0 (-270.0 J mol-1 K-1), and ΔG0 (+ 91.3 to + 98.0 kJ mol-1) indicated the exothermic, endergonic and non-spontaneous nature of the catalytic redox reaction. In addition to facilitating easy recovery, rinsing, and reuse, restraining the Pd@Polym-MNS in the basket reactor helped maintain the integrity of the catalysts by preventing violent collisions of suspended granules with the mixing apparatus and the walls of the reaction vessel. Whereas the pseudo-first-order rate constant was recorded as 0.157 min-1 upon initial use, values of the mean and relative standard deviation for the second, third and fourth consecutive uses were found to be 0.219 min-1 and 1.3%, respectively. According to a response surface methodological approach to batch experimentation, the initial concentration of chromium(VI) and catalyst dosage had the greatest impact on the redox reaction rate, accounting for 85.7% and 11.6% of the variability in the value of the pseudo-first-order rate constant, respectively. Mutually beneficial effects of the combinations of high formic acid and low chromium(VI) concentration, high temperature and catalyst dosage as well as high formic acid and catalyst dosage were recorded.