The electrochemical, dielectric, and ferroelectric properties of Gd and Fe doped LaNiO3 with an efficient solar-light driven catalytic activity to oxidize malachite green dye

Construction of La1-xSrxNiO3/g-C3N4 type-Z heterojunctions with enhanced visible-light photocatalytic degradation of organic pollutants

Lanthanum nickelate (LaNiO3), known for its high visible-light absorption, is a promising photocatalyst for water purification. However, the low conduction band position and high photogenerated carrier complexation rate of pure LaNiO3 limit its photocatalytic activity. To address this issue, we investigated the synergistic effects of doping and constructing heterojunctions. A La0.9Sr0.1NiO3 (20%)/g-C3N4 (L2CN8) heterojunction was successfully created. In addition, various characterisation techniques were then employed to analyse the structure-performance relationships of these heterojunction photocatalysts in degrading organic dyes. Results revealed that at a 10% Sr doping level, the oxygen vacancy content was 0.68, which is significantly higher than that of LaNiO3 (0.05). The increased number of oxygen vacancies enhanced the electron capture ability and improved the separation efficiency of photogenerated carriers. Furthermore, the optimised L2CN8 (20 mg) achieved 81.2% and 73.8% removal of methylene blue (50.0 mL, 10 mg L-1) and tetracycline (50.0 mL, 10 mg L-1) under simulated visible-light irradiation (λ > 420 nm). Furthermore, an active species capture experiment confirmed the significant role of superoxide radicals (·O2-) in the degradation process. Based on these experimental findings, we proposed a rational Z-type charge transfer mechanism. This study holds great importance for water pollution control and environmental protection.

In Situ Electrochemical Cobalt Doping in Perovskite-Structured Lanthanum Nickelate Thin Film Toward Energy Conversion Enhancement of Polymer Solar Cells

This study demonstrates that the electrochemical doping of lanthanum nickelate (LNO) with cobalt ions is a promising strategy for enhancing its physical and electrochemical properties, which are critical for energy storage and conversion devices. LNO emerges as a promising hole transport layer (HTL) in solar cells due to its stability, large band gap, and high transparency. Nevertheless, its low conductivity and improperly aligned band positions are persistent problems. Here, in a pioneering endeavor, Co-doped LNO thin films were synthesized electrochemically and applied as the HTL in polymer solar cells (PSCs). Characterization revealed the impact of Co doping on the electrochemical, structural, morphological, and optical properties of LNO thin films. Depending on the Co doping level, PSCs based on 10 mol % Co-doped LNO outperformed pure LNO, achieving a champion efficiency of 6.11% with enhanced short-circuit current density (12.84 mA cm-2), fill factor (68%), open-circuit voltage (0.70 V), and external quantum efficiency (82.6%). This enhancement resulted from decreased series resistance, refined surface morphology, minimized trap-assisted recombination, enhanced conductivity, increased charge carrier production, favorable energy level alignment, and improved current extraction facilitated by LNC0.10O HTL. Moreover, the unencapsulated PSC-LNC0.10O long-term stability notably improved and retained 86% of its initial PCE after 450 h storage in ambient air, 82% after being continuously heated to 85 °C for 300 h, and 80% after operating at maximum power point for 300 h. These findings offer a straightforward approach to enhancing PSC performance through Co doping of LNO, supported by density functional theory (DFT) calculations that validate the experimental results and confirm the improvement in optical properties and stability of PSCs as an HTL.

A State-of-Art Review of the Metal Oxide-Based Nanomaterials Effect on Photocatalytic Degradation of Malachite Green Dyes and a Bibliometric Analysis

A wide range of hard contaminants in wastewater is generated from different industries as byproducts of the organic compound. In this review, various metal oxide-based nanomaterials are employed for the photocatalytic removal of malachite green (MG) dye from wastewater. Some cost-effective and appropriate testing conditions are used for degrading these hard dyes to get higher removal efficiency. The effects of specific parameters are considered such as how the catalyst is made, how much dye is in the solution at first, how much nanocatalyst is needed to break down the dye, the initial pH of the dye solution, the type of light source used, the year of publications, and how long the dye has to be exposed to light to be removed. This study suggests that Scopus-based core collected data employ bibliometric methods to provide an objective analysis of global MG dye from 2011 to 2022 (12 years). The Scopus database collects all the information (articles, authors, keywords, and publications). For bibliometric analysis, 658 publications are retrieved corresponding to MG dye photodegradation, and the number of publications increases annually. A bibliometric study reveals a state-of-art review of metal oxide-based nanomaterials' effects on photocatalytic degradation of MG dyes (12 years).

Degradation of ciprofloxacin in aqueous solution using ozone microbubbles: spectroscopic, kinetics, and antibacterial analysis

Ciprofloxacin (CIP) has been listed in the last version of the surface water due to its ability to kill human cells by inhibiting the activity of DNA topoisomerase IV. Thus, CIP, along with other antibiotic pollution has become a serious threat to the environment and public health. Ozonation has been used as an advanced technique that is applied in wastewater treatment to remove CIP, but the primary limitation of this method is the low solubility of ozone in water. This study is the first report of CIP removal in a scale-up of its aqueous solution using a self-developed aerator pump-enhanced ozonation (APO) system, which only employs a propeller and a zigzag arrangement of meshes. This aerator pump decreased the size of ozone bubbles by 90% and increased the effective ozone solubility to 0.47 ppm. The mechanism of degradation of CIP is attributed to an oxidation reaction of the antibiotic with reactive oxygen species, such as hydroxyl, oxygen, and hydroperoxyl radicals, generated on the surface of the ozone microbubbles. It was found that the rate and efficiency of degradation of CIP using the APO system were 3.64 × 10⁻³/min and 83.5%, respectively, which is higher compared with those of conventional flow ozonation (FO) systems (1.47 × 10⁻³/min and 60.9%). The higher degradation efficiency of CIP by the APO system was also revealed by its higher electrical energy efficiency (0.146 g/kWh), compared to that of the FO system (0.106 g/kWh). The degradation of CIP was also monitored by the resulting antibacterial activity against Escherichia coli and Staphylococcus aureus.

Molybdenum disulfide loading on a Z-scheme graphitic carbon nitride and lanthanum nickelate heterojunction for enhanced photocatalysis: Interfacial charge transfer and mechanistic insights

Interfacial design and the co-catalyst effect are considered to be effective to achieve separation and transport of photogenerated carriers in composite photocatalysts. In this study, a Z-scheme heterojunction was successfully combined with a co-catalyst to achieve a highly efficient LaNiO₃/g-C₃N₄/MoS₂ photocatalyst. MoS₂ flakes were loaded on a hybrid material surface, which was formed by LaNiO₃ nanocubes embedded on layered g-C₃N₄, and a good heterostructure with multiple attachment sites was obtained. Experimental studies confirmed that the Z-scheme heterojunction completely preserves the strong redox ability of the photogenerated electrons and holes. As a cocatalyst, MoS₂ further promoted interfacial charge separation and transport. The synergistic effect of the Z-scheme heterojunction and co-catalyst effectively realized the transfer of photogenerated carriers from "slow transfer" to "high transfer" and promoted water decomposition and pollutant degradation. Results revealed that under simulated sunlight irradiation, LaNiO₃/g-C₃N₄/MoS₂ composites exhibit superior hydrogen evolution of 45.1 μmol h^-1, which is 19.1 times that of g-C₃N₄ and 4.9 times that of LaNiO₃/g-C₃N₄, respectively. Moreover, the LaNiO₃/g-C₃N₄/MoS₂ Z-scheme photocatalyst exhibited excellent photocatalytic performance for antibiotic degradation and heavy-metal ion reduction under visible light. This study might provide some insights into the development of photocatalysts for solar energy conversion and environmental remediation.

Charge Recombination Suppressing in Dye-Sensitized Solar Cells by Tuning Dielectric Constant of Triphenylamine Dyes with Altering π-Bridge from Naphthalene to Anthracene Units

Charge recombination reactions (CRRs) are responsible for a major contribution of power conversion efficiency (PCE) loss in dye-sensitized solar cells (DSSCs). This study tracks the impact of the dielectric constant...