Clustered piperidinium-functionalized poly(terphenylene) anion exchange membranes with well-developed conductive nanochannels

Tuning polar discrimination between side chains to improve the performance of anion exchange membranes

Anion exchange membranes (AEMs) are the heart of alkaline fuel cells and water electrolysis, and have made a great progress in recent years. However, AEMs are still unable to satisfy the needs of high conductivity and stability, hindering their widespread commercialization. Side chain regulations have been widely used to prepare highly conductive and durable AEMs. Here, we construct a series of polyaromatic AEMs grafted with fluorinated cation side chains and cation-free alkyl chains with different end groups to explore the polar discrimination of side chains on membrane performance. This work demonstrates that AEMs grafting the cation side chains with superhydrophobic fluorine pendent and alkyl side chains with hydrophilic pendent enhance water content and ion conductivity. This is due to the strong immiscibility between the hydrophilic and hydrophobic head groups which promotes the establishments of microphase separation and ion highways. Specifically, poly(binaphthyl-co-terphenyl piperidinium) containing fluorinated piperidinium side chains and alkyl chains with methoxy pendent (QBNTP-QFM) possesses a satisficed OH- conductivity (170.6 mS cm-1 at 80 °C) and can tolerate 5 M hot NaOH for 2100 h with only 3.4 % conductivity loss. Expectedly, the single cell with QBNTP-QFM yields a prominent maximum power density of 1.62 W cm-2 and the water electrolysis cell with QBNTP-QFM achieves a pronounced current density of 3.0 A cm-2 at 1.8 V, both cells also display a prominent durability for 120 h operation. The results prove that this side chain optimization can improve ion conductivity and is a promising method for AEM development.

Separators and Membranes for Advanced Alkaline Water Electrolysis

Traditionally, alkaline water electrolysis (AWE) uses diaphragms to separate anode and cathode and is operated with 5-7 M KOH feed solutions. The ban of asbestos diaphragms led to the development of polymeric diaphragms, which are now the state of the art material. A promising alternative is the ion solvating membrane. Recent developments show that high conductivities can also be obtained in 1 M KOH. A third technology is based on anion exchange membranes (AEM); because these systems use 0-1 M KOH feed solutions to balance the trade-off between conductivity and the AEM's lifetime in alkaline environment, it makes sense to treat them separately as AEM WE. However, the lifetime of AEM increased strongly over the last 10 years, and some electrode-related issues like oxidation of the ionomer binder at the anode can be mitigated by using KOH feed solutions. Therefore, AWE and AEM WE may get more similar in the future, and this review focuses on the developments in polymeric diaphragms, ion solvating membranes, and AEM.

Highly Hydrophilic Zirconia Composite Anion Exchange Membrane for Water Electrolysis and Fuel Cells

To prepare anion exchange membranes with high water electrolysis and single fuel cell performance, an inorganic-organic composite (IOC) strategy with click cross-linked membranes coated with different contents of hydrophilic polar nanozirconia is proposed to fabricate composite membranes (CM) PBP-SH-Zrx. The performance test results showed that the CM PBP-SH-Zr4 not only has good through-plane ionic conductivity (167.7 mS cm-1, 80 °C), but also exhibits satisfactory dimensional stability (SR 16.5%, WU 206.4%, 80 °C), especially demonstrating excellent alkaline stability with only 16% degradation (2 M NaOH for 2200 h). In water electrolysis, the "microgap" between the membrane and catalyst layer (solid-solid interface) is alleviated, and the membrane electrode assembly (MEA) interfacial compatibility (liquid-solid-solid interface) is enhanced. The CM PBP-SH-Zr4 showed the lowest charge transfer resistance (Rct, 0.037 Ω cm2) and a high current density of 2.5 A cm-2 at 2.2 V, while the voltage drop was 0.361 mV h-1 after 360 h of endurance (six start-stop cycles) at 60 °C and 500 mA cm-2, proving a good water electrolysis durability. Moreover, an acceptable peak power density of 0.464 W cm-2 at 80 °C is achieved in a H2/O2 fuel cell with a PBP-SH-Zr4-AEM. Therefore, the IOC strategy can enhance the membrane's comprehensive performance and interface compatibility of MEA and may promote the development of anion exchange membranes (AEMs) for water electrolysis and fuel cells.

Fluorinated poly(p-triphenyl piperidine) anion exchange membranes with robust dimensional stability for fuel cells

Anion exchange membrane fuel cells (AEMFCs), which are more economical than proton exchange membrane fuel cells (PEMFCs), stand out in the context of the rapid development of renewable energy. Superacid-catalyzed ether-free aromatic polymers have recently received a lot of attention due to their exceptional performance, but their development has been hampered by the trade-off between the dimensional stability and ionic conductivity of anion exchange membranes (AEMs). Here, we introduced fluoroketones containing different numbers of fluorinated groups (x = 0, 3 and 6) in the main chain of p-terphenyl piperidine because of the favorable hydrophobic properties of fluorinated groups. The results show that fluorinated AEMs can enhance OH- conductivity by building more aggregated hydrophilic channels while ensuring dimensional stability. The PTF6-QAPTP AEM with more fluorinated groups has the most excellent performance at 80 °C with an OH- conductivity of 142.7 mS cm-1 and a swelling ratio (SR) of only 4.55 %. Additionally, it exhibits good alkali durability, with the OH- conductivity and quaternary ammonium (QA) cation retaining at 93.45% and 92.6%, respectively, after immersion in a 2 M NaOH solution at 80 °C for 1200 h. In addition, the power density of the PTF6-QAPTP based single cell reaches 849 mW cm-2 when the current density is 1600 mA cm-2. The PTF6-QAPTP based cell has a voltage retention of 88% after 80 h of stability testing at a constant current density of 300 mA cm-2 at 80 °C.

Poly(Ethylene Piperidinium)s for Anion Exchange Membranes

The lack of anion exchange membranes (AEMs) that possess both high hydroxide conductivity and stable mechanical and chemical properties poses a major challenge to the development of high-performance fuel cells. Improving one side of the balance between conductivity and stability usually means sacrificing the other. Herein, we used facile, high-yield chemical reactions to design and synthesize a piperidinium polymer with a polyethylene backbone for AEM fuel cell applications. To improve the performance, we introduced ionic crosslinking into high-cationic-ratio AEMs to suppress high water uptake and swelling while further improving the hydroxide conductivity. Remarkably, PEP80-20PS achieved a hydroxide conductivity of 354.3 mS cm-1 at 80 °C while remaining mechanically stable. Compared with the base polymer PEP80, the water uptake of PEP80-20PS decreased by 69 % from 813 % to 350 %, and the swelling decreased substantially by 85 % from 350.0 % to 50.2 % at 80 °C. PEP80-20PS also showed excellent alkaline stability, 84.7 % remained after 35 days of treatment with an aqueous KOH solution. The chemical design in this study represents a significant advancement toward the development of simultaneously highly stable and conductive AEMs for fuel cell applications.

"Thiol-ene" crosslinked polybenzimidazoles anion exchange membrane with enhanced performance and durability

To address the "trade-off" between conductivity and stability of anion exchange membranes (AEMs), we developed a series of crosslinked AEMs by using polybenzimidazole with norbornene (cPBI-Nb) as backbone and the crosslinked structure was fabricated by adopting click chemical between thiol and vinyl-group. Meanwhile, the hydrophilic properties of the dithiol cross-linker were regulated to explore the effect for micro-phase separation morphology and hydroxide ion conductivity. As result, the AEMs with hydrophilic crosslinked structure (PcPBI-Nb-C2) not only had apparent micro-phase separation morphology and high OH^- conductivity of 105.54 mS/cm at 80 °C, but also exhibited improved mechanical properties, dimensional stability (swelling ratio < 15%) and chemical stability (90.22 % mass maintaining in Fenton's reagent at 80 °C for 24 h, 78.30 % conductivity keeping in 2 M NaOH at 80 °C for 2016 h). In addition, the anion exchange membranes water electrolysis (AEMWEs) using PcPBI-Nb-C2 as AEMs achieved the current density of 368 mA/cm² at 2.1 V and the durability over 500 min operated at 150 mA/cm² under 60 °C. Therefore, this work paves the way for constructing AEMs by introduction of norbornene into polybenzimidazole and formation of hydrophilic crosslinked structure based on "thiol-ene".

Effects of the crown ether cavity on the performance of anion exchange membranes

Anion exchange membrane fuel cells (AEMFCs) have emerged as a promising alternative to proton exchange membrane fuel cells (PEMFCs) due to their adaptability to low-cost stack components and non-noble-metals catalysts. However, the poor alkaline resistance and low OH^- conductivity of anion exchange membranes (AEMs) have impeded the large-scale implementation of AEMFCs. Herein, the preparation of a new type of AEMs with crown ether macrocycles in their main chains via a one-pot superacid catalyzed reaction was reported. The study aimed to examine the influence of crown ether cavity size on the phase separation structure, ionic conductivity and alkali resistance of anion exchange membranes. Attributed to the self-assembly of crown ethers, the poly (crown ether) (PCE) AEMs with dibenzo-18-crown-6-ether (QAPCE-18-6) exhibit an obvious phase separated structure and a maximum OH^- conductivity of 122.5 mS cm^-1 at 80 °C (ionic exchange capacity is 1.51 meq g^-1). QAPCE-18-6 shows a good alkali resistance with the OH^- conductivity retention of 94.5% albeit being treated in a harsh alkali condition. Moreover, the hydrogen/oxygen single cell equipped with QAPCE-18-6 can achieve a peak power density (PPD) of 574 mW cm^-2 at a current density of 1.39 A cm^-2.

Semi-interpenetrating anion exchange membranes using hydrophobic microporous linear poly(ether ketone)

In order to realise high ionic conductivity and improved chemical stability, a series of anion exchange membranes (AEMs) with semi-interpenetrating polymer network (sIPN) has been prepared via the incorporation of crosslinked poly(biphenyl N-methylpiperidine) (PBP) and spirobisindane-based intrinsically microporous poly(ether ketone) (PEK-SBI). The formation of phase separated structures as a result of the incompatibility between the hydrophilic PBP network and the hydrophobic PEK-SBI segment, has successfully promoted the hydroxide ion conductivity of AEMs. A swelling ratio (SR) as low as 12.2 % at 80 °C was recorded for the sIPN containing hydrophobic PEK-SBI as the linear polymer and crosslinked structure with a mass ratio of PBP to PEK-SBI of 90/10 (sIPN-90/10_(PEK-SBI)). The sIPN-90/10_(PEK-SBI) AEM achieved the highest hydroxide ion conductivity of 122.4 mS cm^-1 at 80 °C and a recorded ion exchange capacity (IEC) of 2.26 meq g^-1. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) clearly revealed the improved phase separation structure of sIPN-90/10_(PEK-SBI). N₂ adsorption isotherm indicated that the Brunauer-Emmett-Teller (BET) surface area of the AEMs increased with the increase of microporous PEK-SBI content. Interestingly, the sIPN-90/10_(PEK-SBI) AEM showed good alkaline stability for being able to maintain a conductivity of 94.7 % despite being soaked in a 1 M sodium hydroxide solution at 80 °C for 30 days. Meanwhile, a peak power density of 481 mW cm^-2 can be achieved by the hydrogen/oxygen single cell using sIPN-90/10_(PEK-SBI) as the AEM.

Cross-Linked Anion-Exchange Membranes with Dipole-Containing Cross-Linkers Based on Poly(terphenyl isatin piperidinium) Copolymers

To balance the ionic conductivity and dimensional stability of anion-exchange membranes (AEMs), several cross-linked ether-free poly(terphenyl isatin piperidinium) copolymers were synthesized using 1,2-bis(2-aminoethoxy)ethane as a cross-linker. By introducing an alkyl diamine-based hydrophobic cross-linker as a control, the effects of the dipolar-molecule-containing cross-linker on the comprehensive performance of the membranes were investigated. Cation-dipole interactions between the cations and the hydrophilic ethylene oxide cross-linker enhance the self-assembly capability of the cationic groups. The introduction of the rotatable ethylene oxide cross-linker facilitates the flexibility of the cross-linked networks, thereby promoting hydrophilic/hydrophobic phase separation and inhibiting excessive swelling of the corresponding AEMs simultaneously. The resulting PTPBHIN-O₁₉ membrane showed a high hydroxide conductivity (151.69 mS cm^-1) and low swelling ratio (10.53%) at 80 °C. Furthermore, owing to the cross-linked structure and ether-free polymer backbone with high alkali resistance, the membranes treated in 3 M NaOH at 80 °C for 1600 h maintained ≥85% of their hydroxide conductivity, indicating excellent alkaline stability. A H₂/O₂ fuel cell based on the PTPBHIN-O₁₉ AEM exhibited a maximum power density of 398 mW cm^-2 at 515 mA cm^-2.