Manipulate the nano-structure of layered double hydroxides via calcination for enhancing immobilization of anionic dyes on collagen fibers

Biomass chitosan/sodium alginate colorimetric imprinting hydrogels with integrated capture and visualization detection for cadmium(II)

Due to Cd(II) with highly toxic, persistent and bioaccumulative, the discharge of it into the environment brings serious pollution. Developing strategies that are efficient, low-cost, pollution-free and specific to removing Cd(II) from wastewater is therefore of great urgency and prime importance. A novel chitosan/sodium alginate ionic imprinting(IICA) hydrogels with specific adsorption capacity for Cd(II) was prepared through freeze-thaw and ion imprinting, and finally the colorimetric sensor (IICAS) was prepared via introducing Rhodamine B(RhB) and Victoria blue(VBB) by immersion to achieve visual detection of Cd(II). The IICA hydrogels with imprinted hole structure had higher adsorption capacity and better specific selectivity for Cd(II). As well as internal diffusion, coordination, ion exchange, and hydrogen bonding influenced the adsorption rate. Moreover, the IICAS exhibited good selective detection ability and linearity for Cd(II) with the fitted correlation coefficient (R2) = 0.98, limit of detection (LOD) = 35 nmol/L. Combined with the smartphone platform, portable and quantitative detection of Cd(II) can be achieved, Within the 0-100 mg/L range, R2 remained 0.94, and LOD was 75 nmol/L. This strategy of preparing a novel whole biomass IICAS integrating capture and visual detection provides a new insight into the construction of a promising candidate sensor for the removal and detection of Cd(II).

Covalently surface-grafting α‑zirconium phosphate nanoplatelets enables collagen fiber matrix with ultraviolet barrier, antibacterial, and flame-retardant properties

Manipulating the dispersibility and reactivity of two-dimensional nanomaterials in collagen fibers (CFs) matrix has aroused attention in the fabrication of multifunctional collagen-based nanocomposites. Here, α‑zirconium phosphate nanoplatelets (ZrP NPs) were surface-functionalized with gallic acid (GA) to afford ZrP-GA NPs for engineering CFs matrix. The influence of ZrP-GA NPs on the ultraviolet barrier, antibacterial, and flame-retardant properties of resultant CFs matrix were investigated. Microstructural analysis revealed that ZrP-GA NPs were dispersed and bound within the collagen fibrils and onto the collagen strands in the CFs matrix. The resultant CFs matrix also maintained typical D-periodic structures of collagen fibrils and native branching and interwoven structures of CFs networks with increased porosity and enhanced ultraviolet barrier properties. Inhibition zone testing presented excellent antibacterial activities of the CFs matrix owing to surface grafting of antibacterial GA. Thanks to enhanced dispersion and binding of ZrP NPs with the CFs matrix by surface-functionalization with GA, the resultant CFs matrix reduced the peak heat release rate and the total heat release by 42.9 % and 39.0 %, respectively, highlighting improved flame-retardant properties. We envision that two-dimensional nanomaterials possess great potential in developing reasonable collagen-based nanocomposites towards the manufacture of emergent multifunctional collagen fibers-based wearable electronics.

Waste biomass-derived N, P co-doping carbon aerogel-coated CoxFe1-xP with modulated electron density for efficient electrooxidation of contaminants

Developing low-cost, green, high-performing electrode materials to address environmental pollutants and the energy crisis is significant but challenging. Herein, the bimetallic iron cobalt phosphide coated in waste biomass-derived N, P co-doping carbon (CoxFe1-xP@NPC) is constructed. Furthermore, the active site density and the water decomposition energy barrier of surface-coated NPC are modulated by optimizing the electronic structure of CoxFe1-xP via doping engineering. The Fe-modulated CoxFe1-xP@NPC exhibits a hierarchical porous self-supporting structure and excellent physical & chemical properties with excellent electrooxidation performance, achieving over 95% removal of TCH within 60 min. The density functional theory (DFT) calculations further confirms that N carries more positive charge and P carries more negative charge in the NPC of CoxFe1-xP@NPC with Fe modulation, which can promote the adsorption and dissociation of water molecules. Of note, Co0.75Fe025P@NPC displays a low water dissociation energy barrier to produce ·OH and a high energy barrier to produce O2 than its counterparts. This study offers new insight into controllable modulation of biomass carbon-based composite electrode catalytic activity for high-efficiency degradation of contaminants.

Superhydrophobic and Photocatalytic Synergistic Self-Cleaning Coating Constructed by Hierarchically Structured Flower-like Hollow SiO2@TiO2 Spheres with Oxygen Vacancies

The self-cleaning coating has both superhydrophobic physical and photocatalytic chemical self-cleaning properties, which has attracted the wide attention of researchers in recent years. First, the flower-like hollow SiO2@TiO2 spheres with oxygen vacancies (rFHSTs) were prepared by the liquid-phase reduction method, in which several different functional components were integrated. Meanwhile, the influence mechanisms of the physical structure and chemical composition on the photocatalytic properties are discussed in detail. The results proved that rFHSTs exhibited the enhanced photoresponse range and photocatalytic degradation performance in visible light because of the synergistic effect of the microstructure (internal cavity, 3D flower-like nanosheet), SiO2/TiO2 heterojunction structure, and oxygen vacancies. After that, superhydrophobic modified rFHSTs were used as fillers to fabricate PVA/PFDTS-rFHSTs composite coatings with both physical and chemical self-cleaning properties. The self-cleaning performances and principles of the composite coating were examined and explored. The results showed that the low surface energy of the hydrophobic chain segment, the inherent particle effect, and the photocatalytic activity of rFHSTs were responsible for the superhydrophobic and photocatalytic effects, finally endowing the composite coating with self-cleaning performance. In short, this study is profound for the development and application of self-cleaning coatings with both physical and chemical performances.

Photocatalytic degradation of bisphenol A by temperature-sensitive magnetic hydrogel with enhanced service life

Easy diffusion and low reusability limit the practicality of photocatalysts. In this study, a hollow sphere (HS) heterojunction was synthesized based on oxygen-doped carbon nitride (OCN) and layered double hydroxides (LDHs). A thermosensitive HS hydrogel (HS Gel) was prepared by mixing HS with N-isopropylacrylamide. Bisphenol A (BPA), being widely manufactured and used in commercial and domestical products and its high toxicity, was chosen as the target pollutant to demonstrate the photocatalytic ability and practicality of the HS Gel. HS Gel presented effective BPA degradation (95% degradation in 70 mins, 4.2 × 10-2 min-1 of kobs) at ambient temperature which is much better than kobs = 1.8 × 10-2 min-1 of OCN and kobs = 0.08 × 10-2 min-1 of LDH), and increased by two-fold the recycling service life (retention of >80% degradation efficiency after 13 usage cycles) compared to other carbon-based photocatalysts (retention of >80% degradation efficiency after 5-6 usage cycles). This is due to its multifunctional characteristics (magnetic property and thermal sensitivity). Under ambient temperature, the hydrophilic HS Gel swelled in the aqueous solution, which promoted the photocatalytic reaction between HS and BPA in the gel state. After the reaction, the HS Gel was subjected to shrinkage by high temperature heating to enhance the mechanical strength for recovery. The magnetic recovery was realized by the paramagnetic properties of layered double oxide to reduce environmental interference. Detailed studies of HS gel related to enhanced service life were conducted including structural changes, catalyst leaking and magnetic changing. A new kind of type Ӏ plus Z-scheme mechanism was also proposed based on the Kubelka-Munk equation, UV diffuse reflectance spectroscopy and Mott-Schotty technique.

Biochar/layered double hydroxides composites as catalysts for treatment of organic wastewater by advanced oxidation processes: A review

Heterogeneous advanced oxidation process has been widely studied as an effective method for removing organic pollutants in wastewater, but the development of efficient catalysts is still challenging. This review summaries the present status of researches on biochar/layered double hydroxides composites (BLDHCs) as catalysts for treatment of organic wastewater. The synthesis methods of layered double hydroxides, the characterizations of BLDHCs, the impacts of process factors influencing catalytic performance, and research advances in various advanced oxidation processes are discussed in this work. The integration of layered double hydroxides and biochar provides synthetic effects for improving pollutant removal. The enhanced pollutant degradation in heterogeneous Fenton, sulfate radical-based, sono-assisted, and photo-assisted processes using BLDHCs have been verified. Pollutant degradation in heterogeneous advanced oxidation processes using BLDHCs is influenced by process factors such as catalyst dosage, oxidant addition, solution pH, reaction time, temperature, and co-existing substances. BLDHCs are promising catalysts due to the unique features including easy preparation, distinct structure, adjustable metal ions, and high stability. Currently, catalytic degradation of organic pollutants using BLDHCs is still in its infancy. More researches should be conducted on the controllable synthesis of BLDHCs, the in-depth understanding of catalytic mechanism, the improvement of catalytic performance, and large-scale application of treating real wastewater.

Strategical development of chrome-free tanning agent by integrating layered double hydroxide with starch derivatives

The development of sustainable and eco-friendly leather industry requires green tanning agents because of unbounded chromium (easily converted into hazardous Cr-VI) in chrome tanned leather. In this study, a chrome-free tanning agent (OS-LDHs) was established by integrating layered double hydroxide (magnesium aluminum zirconium hydrotalcite, LDHs) with starch derivatives. A series of oxidized starch (OS) were prepared as masking agents for LDHs tanning process. Among them, the weight-average molecular weight (Mw) of 1685 g/mol could be reached, which will promise the well-distribution of OS. The SEM and EDS analysis confirmed the uniform penetration of OS-LDHs, avoiding accumulation on the surface of crust leather. Notably, leather tanned by OS-LDHs achieved shrinkage temperature of 66.7 °C, porosity of 75.51 % and tear strength of 66.7 N/mm. Not only the hydrogen bond but also the coordination between NH₂, COOH in collagen and OS-2-LDHs improved the thermal stability of leather without destroying the collagen triple helix.

An efficient dehairing system supported by oxidative-enzymatic auxiliary towards sustainability

A method of dehairing of goat skins using oxidative chemicals and protease enzymes has been attempted. The dehairing process is one of the important and essential steps in leather making, where hair is removed by lime and sodium sulphide in the conventional process. This conventional dehairing system generates a higher amount of pollution problem as compared to the other unit operations and unit processes. In this work, dehairing of the goat skins through oxidative agents namely magnesium peroxide and protease enzyme has been attempted. For this, protease has been produced from Bacillus sp. at the laboratory level and the activity was found. The dehairing of goat skins takes place for the duration of 14-16 h. The leather produced with the experimental sample showed comparable organoleptic and strength properties with the conventional sample. This method paved the way for the reduction of pollution loads especially BOD, COD, and TDS to the level of 59, 27, and 77%, respectively, in comparison with the control sample. The reaction kinetics for the formation of the ligand-macromolecular complex is found in the isothermal titration calorimetry (ITC) experiment and a mathematical model has been formulated. The dyed crust leather showed comparable colour properties. In addition to that, there is a reduction in processing time for leather making through skipping reliming and deliming processes which are said to be another advantage of this method. The physical strength properties of the experimental leather were also comparable with conventionally produced leather.

A Multifunctional Cascade Bioreactor Based on a Layered Double Oxides Composite Hydrogel for Synergetic Tumor Chemodynamic/Starvation/Photothermal Therapy

The field of nanomedicine-catalyzed tumor therapy has achieved a lot of progress; however, overcoming the limitations of the tumor microenvironment (TME) to achieve the desired therapeutic effect remains a major challenge. In this study, a nanocomposite hydrogel (GH@LDO) platform combining the nanozyme CoMnFe-layered double oxides (CoMnFe-LDO) and natural enzyme glucose oxidase (GOX) was engineered to remodel the TME to enhance tumor catalytic therapy. The CoMnFe-LDO is a nanozyme that can convert endogenous H₂O₂ into reactive oxygen species (ROS) and O₂ to achieve chemodynamic therapy (CDT) and alleviate the hypoxic microenvironment. Meanwhile, GOX can catalyze the conversion of glucose and O₂ to gluconic acid and H₂O₂, which not only represses the ATP production of tumor cells to achieve starvation therapy (ST), but also decreases the pH value of TME and supplies extra H₂O₂ to enhance the CDT effect. Furthermore, this well-designed CoMnFe-LDO possessed a high photothermal conversion efficiency (66.63%), which could promote the generation of ROS to enhance the CDT effect and achieve photothermal therapy (PTT) under near-infrared light irradiation. The GH@LDO hydrogel cascade reaction overcomes the limitation of the TME and achieves satisfactory CDT/ST/PTT synergetic effects in vitro and in vivo. This work provides a new strategy for remodeling the TME using nanomedicine to achieve precise tumor cascaded catalytic therapy. STATEMENT OF SIGNIFICANCE: At present, the focus of tumor therapy has begun to shift from monotherapy to combination therapy for improving the overall therapeutic effect. In this study, we synthesized a CoMnFe-layered double oxide (CoMnFe-LDO) nanozyme composed of multiple transition metal oxides, which demonstrated improved peroxidase and oxidase activities as well as favorable photothermal conversion capability. The CoMnFe-LDO nanozyme was compounded with an injectable GH hydrogel crosslinked by glucose oxidase (GOX) and peroxidase (HRP). This nanocomposite hydrogel overcame the limitations of weak acidity, H₂O₂, and O₂ levels in the tumor microenvironment (TME) and achieved synergetic chemodynamic therapy (CDT), starvation therapy (ST), and photothermal therapy (PTT) effects based on the cascaded catalytic actions of CoMnFe-LDO and GOX to H₂O₂ and glucose.

A comparative study on cross-linking of fibrillar gel prepared by tilapia collagen and hyaluronic acid with EDC/NHS and genipin

Chemical cross-linking is an important step to grant satisfying properties to collagen-based materials. However, there are few comparative studies on crossing-linking of collagen-based fibrillar gels which are preferred biomaterials for similar properties to native tissues with different cross-linking agents. In this study, a fibrillar gel was fabricated with tilapia collagen and hyaluronic acid, and cross-linking conditions with EDC/NHS and genipin were discussed. Genipin gave gels much higher equilibrium cross-linking degree than EDC/NHS. ATR-FTIR and XPS showed EDC/NHS offered short-range cross-linking formed by amino and carboxyl groups in fibrils, while genipin induced long-range cross-linking by nucleophilic reaction through attack of amino groups in fibrils on carbon atoms at C-3 as well as ester groups in genipin, besides improved hydrogen bonds. XRD and SEM revealed the structural integrity of gels was strengthened after cross-linking, whereas fibril bundles disaggregated into thin fibrils. Consequently, swelling capacity and anti-degraded property were enhanced significantly, while thermal stability weakened. The fibrillar gels had good biocompatibility, but interestingly the appearance and migration of L929 fibroblasts were influenced by cross-linking degree. These results demonstrated that aquatic collagen-based fibrillar gel cross-linked by genipin had greater potential in biomaterials than EDC/NHS, whereas the cross-linking degree should be controlled.

Study on the adsorption properties of multiple-generation hyperbranched collagen fibers towards isolan-series acid dyes

In the present study, collagen fibers derived from leather solid wastes were used and modified as insoluble vectors and successfully employed as adsorbents for the removal of acid dyes. A “one-step” method was applied to synthesis effective adsorbents, which provided a sustainable way to reuse leather solid wastes via multifunctional modification. The adsorption properties of amino-terminated hyperbranched polymer (HBPN)-modified collagen fibers for the removal of different kinds of acid dyestuff from aqueous solutions were studied. The adsorption capacities of the second generation of modified collagen fibers (CF-HBPN-II) toward Isolan Black 2S-LD, Supralan Yellow, Isolan Grey K-PBL 02, Isolan Dark Blue 2S-GL 03, and Isolan Brown NHF-S were determined to be 224.87, 340.14, 287.36, 317.80, and 251.25 mg g⁻¹, respectively. Three kinetic models, namely, pseudo-first-order, pseudo-second-order and intraparticle diffusion, were used to analyze the kinetic data. The fitting result indicated that the adsorption process of Isolan Black 2S-LD on CF-HBPN-II followed a pseudo-second-order rate model. The adsorption equilibrium of amino-terminated hyperbranched polymer-modified collagen fibers (CF-HBPN) was analyzed using the Langmuir, Freundlich and Temkin isotherm models. The Langmuir isotherm was suitable to describe the adsorption process of Isolan Black 2S-LD. R_L was observed to be in the range of 0–1. The values of ΔH, ΔS and ΔG suggest that adsorption is an endothermic and spontaneous process. The adsorbed dye from the modified collagen fiber was successfully desorbed by 0.1 M NaOH. This research provides theoretical guidance for the engineering and recycling application of bio-based adsorbents.

Collagen fibers extracted from leather wastes were modified by amino-terminated hyperbranched polymers to prepare CF-HBPN-I and CF-HBPN-II. The adsorption process of CF-HBPN-II toward Isolan Black 2S-LD is in accordance with the pseudo-second-order and Langmuir model.