Magnesium-regulated oxygen vacancies of cobalt-nickel layered double hydroxide nanosheets for ultrahigh performance asymmetric supercapacitors

2D-on-2D Al-Doped NiCo LDH Nanosheet Arrays for Fabricating High-Energy-Density, Wide Voltage Window, and Ultralong-Lifespan Supercapacitors

Battery-type electrode materials with high capacity, wide potential windows, and good cyclic stability are crucial to breaking through energy storage limitations and achieving high energy density. Herein, a novel 2D-on-2D Al-doped NiCo layered double hydroxide (NiCoAlx LDH) nanosheet arrays with high-mass-loading are grown on a carbon cloth (CC) substrate via a two-step hydro/solvothermal deposition strategy, and the effect of Al doping is employed to modify the deposition behavior, hierarchical morphology, phase stability, and multi-metallic synergistic effect. The optimized NiCoAl0.1 LDH electrode exhibits capacities of 5.43, 6.52, and 7.25 C cm-2 (9.87, 10.88, and 11.15 F cm-2) under 0-0.55, 0-0.60, and 0-0.65 V potential windows, respectively, illustrating clearly the importance of the wide potential window. The differentiated deposition strategy reduces the leaching level of Al3+ cations in alkaline solutions, ensuring excellent cyclic performance (108% capacity retention after 40 000 cycles). The as-assembled NiCoAl0.1 LDH//activated carbon cloth (ACC) hybrid supercapacitor delivers 3.11 C cm-2 at 0-2.0 V, a large energy density of 0.84 mWh cm-2 at a power density of 10.00 mW cm-2, and excellent cyclic stability with ≈135% capacity retention after 150 000 cycles.

Construction of porous flower-like Ru-doped CoNiFe layered double hydroxide for supercapacitors and oxygen evolution reaction catalysts

In recent years, ternary layered double hydroxide (LDH) has become a research hotspot for electrode materials and oxygen evolution reaction (OER) catalyst due to the enhanced synergistic effect between individual elements. However, the application of LDH is greatly limited by its low electrical conductivity and the disadvantage that nanosheets tend to accumulate and mask the active sites. Herein, a novel Ru-doped CoNiFe - LDH was prepared via a facile hydrothermal method. According to the density functional theory (DFT) calculations, the doping of Ru element could improve electron state density and band gaps of LDH and consequently boosted the electrochemical reaction kinetics as well as electrical conductivity. Furthermore, introduction of Ru atom induced the formation of porous flower-like structures in nanosheets. Compared to CoNiFe - LDH (28.9 m2/g), Ru-doped CoNiFe - LDH performed larger specific surface area of 53.1 m2/g, resulting in more electrochemically active sites. In these case, Ru-doped CoNiFe - LDH demonstrated better energy storage performance of 176.0 mAh/g at 1 A/g compared to original CoNiFe - LDH (78.9 mAh/g at 1 A/g). Besides, the assembled Ru-doped CoNiFe - LDH//activated carbon (AC) device delivered a maximum energy density of 36.4 W h kg-1 at the power density of 740.3 W kg-1 and an outstanding cycle life (78.7 % after 10,000 cycles). Meanwhile, Ru-doped CoNiFe - LDH exhibited lower overpotential (339 mV at 50 mA cm-2) and Tafel slope (93.2 mV dec-1). Therefore, this work provided novel and valuable insights into the rational doping of Ru elements for the controlled synthesis of supercapacitor electrode materials and OER catalysts.

Achieving high-capacity aqueous supercapacitors via anion-doped construction of dual redox centers in NixCo1-xSeO3

In asymmetric supercapacitors, transition metal selenates are promising electrodes, but their capacity are limited by a single redox center. To further enhance the performance of transition metal selenates, NixCo1-xSeO3 (NCSeO) doped with N and Cl was prepared on nickel-plated carbon cloth (NCSeO-NCl-NiCC). During electrochemical reactions, NCSeO can be converted to M(OH)2 (M = Ni/Co) and OH- is replaced by N and Cl. Two redox centers, M(OH)2/MOOH and M(OH)xN2-x/NO3-, are formed during charging and discharging, which is attributed to the increased capacity of the NCSeO-NCl-NiCC electrode. On NCSeO, the substitution of Cl facilitates the regulation of the electronic structure and enhances the stability of N-doping. The optimised electrode exhibits a high capacity of 417 mA h g-1 at 1 A g-1 and an impressive rate capability of 235 mA h g-1 at 50 A g-1. Asymmetric supercapacitors with this design have an ultra-high energy density of 73.6 W h kg-1, as well as an excellent rate and cycling performance with a capacitance retention of 97.8% after 20 000 cycles at a current density of 20 A g-1.

Regulating the Oxygen Vacancy and Electronic Structure of NiCo Layered Double Hydroxides by Molybdenum Doping for High-Power Hybrid Supercapacitors

Amelioration of nickel-cobalt layered double hydroxides (NiCo-LDH) with a high specific theoretical capacitance is of great desire for high-power supercapacitors. Herein, a molybdenum (Mo) doping strategy is proposed to improve the charge-storage performance of NiCo-LDH nanosheets growing on carbon cloth (CC) via a rapid microwave process. The regulation of the electronic structure and oxygen vacancy of the LDH is consolidated by the density functional theory (DFT) calculation, which demonstrates that Mo doping narrows the band gap, reduces the formation energy of hydroxyl vacancies, and promotes ionic and charge transfer as well as electrolyte adsorption on the electrode surface. The optimal Mo-doped NiCo-LDH electrode (MoNiCo-LDH-0.05/CC) has an amazing specific capacity of 471.1 mA h g-1 at 1 A g-1 , and excellent capacity retention of 84.8% at 32 A g-1 , far superior to NiCo-LDH/CC (258.3 mA h g-1 and 76.4%). The constructed hybrid supercapacitor delivers an energy density of 103.3 W h kg-1 at a power density of 750 W kg-1 and retains the cycle retention of 85.2% after 5000 cycles. Two assembled devices in series can drive thirty LED lamps, revealing a potential application prospect of the rationally synthesized MoNiCo-LDH/CC as an energy-storage electrode material.

Chemistry Aspects and Designing Strategies of Flexible Materials for High-Performance Flexible Lithium-Ion Batteries

In recent years, flexible and wearable electronics such as smart cards, smart fabrics, bio-sensors, soft robotics, and internet-linked electronics have impacted our lives. In order to meet the requirements of more flexible and adaptable paradigm shifts, wearable products may need to be seamlessly integrated. A great deal of effort has been made in the last two decades to develop flexible lithium-ion batteries (FLIBs). The selection of suitable flexible materials is important for the development of flexible electrolytes self-supported and supported electrodes. This review is focused on the critical discussion of the factors that evaluate the flexibility of the materials and their potential path toward achieving the FLIBs. Following this analysis, we present how to evaluate the flexibility of the battery materials and FLIBs. We describe the chemistry of carbon-based materials, covalent-organic frameworks (COFs), metal-organic frameworks (MOFs), and MXene-based materials and their flexible cell design that represented excellent electrochemical performances during bending. Furthermore, the application of state-of-the-art solid polymer and solid electrolytes to accelerate the development of FLIBs is introduced. Analyzing the contributions and developments of different countries has also been highlighted in the past decade. In addition, the prospects and potential of flexible materials and their engineering are also discussed, providing the roadmap for further developments in this fast-evolving field of FLIB research.

Insight into the decay mechanism of cycling capacitance for layered double hydroxides at subnanometer scale

The application of layered double hydroxides (LDHs) in supercapacitors is encouraged by their high capacitances but still limited by deficient cycling stability. The remarkable capacitance decay of LDHs during cycling mainly results from the narrowing of the interlayer distance due to the interlayer anion replacement. A polymer encapsulation strategy is developed to improve the cycling stability of LDHs by inhibiting the anion exchange, opening a new avenue to develop stable LDH-based supercapacitor materials.

ZIF-67 Derived Co2VO4 Hollow Nanocubes for High Performance Asymmetric Supercapacitors

In this work, a new type of Co₂VO₄ hollow nanocube (CoVO-HNC) was synthesized through an ion exchange process using ZIF-67 nanocubes as a template. The hollow nanocubic structure of the CoVO-HNC provides an abundance of redox sites and shortens the ion/electron diffusion path. As the electrode material of supercapacitors, the specific capacitance of CoVO-HNC is 427.64 F g⁻¹ at 1.0 A g⁻¹. Furthermore, an asymmetric supercapacitor (ASC) was assembled using CoVO-HNC and activated carbon (AC) as electrodes. The ASC device attains an energy density of 25.28 Wh kg⁻¹ at a high-power density of 801.24 W kg⁻¹, with 78% capacitance retention after 10,000 cycles at 10 A g⁻¹.