In-situ sunlight-driven tuning of photo-induced electron-hole generation and separation rates in bismuth oxychlorobromide for highly efficient water decontamination under visible light irradiation

A novel approach for immobilizing Ag/ZnO nanorods on a glass substrate: Application in solar light-driven degradation of micropollutants in water

One of the main challenges in applying photocatalysts for water treatment is the complex separation and recycling process. In this study, we developed highly stable, porous zinc oxide nanorods (ZnO NRs) immobilized on glass vials using a solvent exchange process (SEP) and hydrothermal calcination. Key parameters, including oleic acid concentration and hydrothermal growth time, were optimized to maximize the active surface area, significantly enhancing photodegradation performance. Under the best conditions, ZnO NRs-coated vials achieved nearly 100% degradation of sulfamethoxazole (SMX) in 10 h of simulated solar irradiation. Depositing silver nanoparticles on the surface of ZnO NRs (Ag/ZnO NRs) further improved performance, reducing degradation time to 4 h and increasing photocatalyst stability. The Ag/ZnO NRs-coated vials, optimized with an Ag precursor concentration of 0.05 M, also demonstrated high degradation rates (>99%) for eight organic micropollutants at environmentally relevant concentrations over multiple reuse cycles and with minimal metal leaching. This study presents an innovative, tunable method for immobilizing photocatalysts on glass substrates, offering high surface area, excellent photocatalytic activity, and mechanical properties, making it highly suitable for water treatment applications.

Current trends on dry photocatalytic oxidation technology for BTX removal: Viable light sources and highly efficient photocatalysts

One of the main gaseous pollutants released by chemical production industries are benzene, toluene and xylene (BTX). These dangerous gases require immediate technology to combat them, as they put the health of living organisms at risk. The development of heterogeneous photocatalytic oxidation technology offers several viewpoints, particularly in gaseous-phase decontamination without an additional supply of oxidants in air at atmospheric pressure. However, difficulties such as low quantum efficiency, ability to absorb visible light, affinity towards CO2 and H2O synthesis, and low stability continue to limit its practical use. This review presents recent advances in dry-phase heterogeneous photodegradation as an advanced technology for the practical removal of BTX molecules. This review also examines the impact of low-cost light sources, the roles of the active sites of photocatalysts, and the feasible concentration range of BTX molecules. Numerous studies have demonstrated a significant improvement in the efficiency of the photodegradation of volatile organic compounds by enhancing the photocatalytic reactor system and other factors, such as humidity, temperature, and flow rate. The mechanism for BTX photodegradation based on density functional theory (DFT), electron paramagnetic resonance (EPR) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) investigations is also discussed. Finally, the present research complications and anticipated future developments in the field of heterogeneous photocatalytic oxidation technology are discussed.

Facile construction of photocatalytic cellulose-based sponge with stable flotation properties as efficient and recyclable photocatalysts for sewage treatment

Dispersion and recycling of powdered nano-photocatalysts for water purification is still not an easy task. The self-supporting and floating photocatalytic cellulose-based sponges ware conveniently prepared by anchoring BiOX nanosheet arrays on cellulose-based sponge's surface. The introduction of sodium alginate into the cellulose-based sponge significantly enhanced the electrostatic adsorption of bismuth oxygen ions and promoted the formation of bismuth oxyhalide (BiOX) crystal nuclei. Among the photocatalytic cellulose-based sponges, the sponge (BiOBr-SA/CNF) modified with bismuth oxybromide displayed excellent photocatalytic ability for photodegrading 96.1 % rhodamine B within 90 min under 300 W Xe lamp irradiation (λ > 400 nm). The loading of bismuth oxybromide on cellulose-based sponge's surface improves the flotation stability of the cellulose-based sponge. Benefiting from excellent load fastness of bismuth oxybromide nanosheet and flotation stability of BiOBr-SA/CNF sponge, after 5 cycles of recycling, the photodegradation rates of BiOBr-SA/CNF sponge to rhodamine B remained above 90.2 % (90 min), and it also has excellent photocatalytic degradation effect on methyl orange and herbicide isoproteron. This work may provide a convenient and efficient method to construct self-supporting and floating photocatalytic sponges using cellulose based materials as substrates for sewage treatment.

Ultra-Violet-Assisted Scalable Method to Fabricate Oxygen-Vacancy-Rich Titanium-Dioxide Semiconductor Film for Water Decontamination under Natural Sunlight Irradiation

This work reports the fabrication of titanium dioxide (TiO₂) nanoparticle (NPs) films using a scalable drop-casting method followed by ultra-violet (UV) irradiation for creating defective oxygen vacancies on the surface of a fabricated TiO₂ semiconductor film using an UV lamp with a wavelength oof 255 nm for 3 h. The success of the use of the proposed scalable strategy to fabricate oxygen-vacancy-rich TiO₂ films was assessed through UV-Vis spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The Ti 2p XPS spectra acquired from the UV-treated sample showed the presence of additional Ti³⁺ ions compared with the untreated sample, which contained only Ti⁴⁺ ions. The band gap of the untreated TiO₂ film was reduced from 3.2 to 2.95 eV after UV exposure due to the created oxygen vacancies, as evident from the presence of Ti³⁺ ions. Radiation exposure has no significant influence on sample morphology and peak pattern, as revealed by the SEM and XRD analyses, respectively. Furthermore, the photocatalytic activity of the fabricated TiO₂ films for methylene-blue-dye removal was found to be 99% for the UV-treated TiO₂ films and compared with untreated TiO₂ film, which demonstrated only 77% at the same operating conditions under natural-sunlight irradiation. The proposed UV-radiation method of oxygen vacancy has the potential to promote the wider application of photo-catalytic TiO₂ semiconductor films under visible-light irradiation for solving many environmental and energy-crisis challenges for many industrial and technological applications.

Novel La3+/Sm3+ co-doped Bi5O7I with efficient visible-light photocatalytic activity for advanced treatment of wastewater: Internal mechanism, TC degradation pathway, and toxicity analysis

Controlling semiconductor photocatalysts by doping rare-earth ions is an effective strategy to improve photocatalytic performance. Simple solvothermal and calcination methods were used to prepare La³⁺ and Sm³⁺ modified Bi₅O₇I nanomaterials. Some characterizations such as XRD, XPS, SEM, TEM, UV-vis, etc. were carried out to explore its structural composition and photoelectrochemical properties. The photocatalytic activity was investigated by simulating the degradation of TC and RhB under visible-light irradiation. The degradation results showed that the photocatalytic efficiency of 4S4L-Bi₅O₇I was the best among the samples with the 100% degradation rate of TC (Tetracycline hydrochloride) and 93% of RhB (Rhodamine B). The capture experiment and ESR test proved that the active substances that play a role in the photocatalytic degradation of pollutants were ·O₂^-, ¹O₂ and h⁺, and on this basis, the possible degradation mechanism was proposed. The final results showed that La/Sm co-doping expanded the light absorption range of Bi₅O₇I and improved the charge separation efficiency and the specific surface area. Besides, the surface defects were formed on the surface of Bi₅O₇I due to ion-doping, which could catch e^- to promote the separation and transfer of carriers and improve the photocatalytic activity. LC-MS was used to analyze the possible degradation pathways of TC. And the toxicity of TC was also analyzed via T.E.S.T and Toxtree. The results showed comprehensive toxicity of TC was decreased by 4S4L-Bi₅O₇I so that the overall water pollution was reduced. This work can provide a reference for the subsequent development of bismuth-based photocatalysts.

High-Throughput Strategies for the Design, Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.

Interface engineering of p-p Z-scheme BiOBr/Bi12O17Br2 for sulfamethoxazole photocatalytic degradation

The Z-scheme heterojunction has received widespread attention due to it can effectively improve the photocatalytic activity of photocatalytic materials. In this paper, a p-p Z-scheme hererojunction composed of bismuth oxybromide and oxygen-rich bismuth oxybromide was synthesized via facile one-step solvothermal method. Based on the characterization results, we demonstrated that the BiOBr/B_i12O₁₇Br₂ Z-scheme heterojunction was synthesized by intimate interface contact between BiOBr and B_i12O₁₇Br₂ p-type semiconductors. This endowed the heterojunction composite with excellent photogenerated carrier transfer ability and photogenerated electron-hole separation performance compared with pure BiOBr and B_i12O₁₇Br₂ materials, which were proven by photoelectrochemical measurement, photoluminescence spectra. The maximum photocurrent of BiOBr/Bi₁₂O₁₇Br₂ (≈0.32 μA) is approximately 3 times that of the original BiOBr (≈0.08 μA ) when light is irradiated. In addition, the BiOBr/B_i12O₁₇Br₂ p-p Z-scheme composite photocatalyst had good photocatalytic activity for sulfamethoxazole, with ·O₂^- free radicals as the main active species. It could photodegrade 99% sulfamethoxazole under light irradiation at 365 nm, and its degradation rate was approximately 13 times that of BiOBr and 1.5 times that of B_i12O₁₇Br₂ materials. Notably, BiOBr/B_i12O₁₇Br₂ exhibited an excellent performance after 4 consecutive runs. Besides, the possible degradation pathway of sulfamethoxazole was proposed. This work has reference significance for the construction of p-p Z-scheme heterojunctions and the treatment of environmental contaminants.

Efficient removal of humic acid in water using a novel TiO2 composite with biochar doping

Titanium dioxide modified with biochar (Ti–C) was prepared by a sol–gel method for the degradation of humic acid (HA) in aqueous solutions.