Fabrication of cobaltous telluride and carbon composite as a promising carrier for boosting electro oxidation of ethylene glycol on palladium in alkaline medium

Steering the Selective Production of Glycolic Acid by Electrocatalytic Oxidation of Ethylene Glycol with Nanoengineered PdBi-Based Heterodimers

Heterodimers of metal nanocrystals (NCs) with tailored elemental distribution have emerged as promising candidates in the field of electrocatalysis, owing to their unique structures featuring heterogeneous interfaces with distinct components. Despite this, the rational synthesis of heterodimer NCs with similar elemental composition remains a formidable challenge, and their impact on electrocatalysis has remained largely elusive. In this study, Pd@Bi-PdBi heterodimer NCs are synthesized through an underpotential deposition (UPD)-directed growth pathway. In this pathway, the UPD of Bi promotes a Volmer-Weber growth mode, allowing for judicious modulation of core-satellite to heterodimer structures through careful control of supersaturation and growth kinetics. Significantly, the heterodimer NCs are employed in the electrocatalytic process of ethylene glycol (EG) with high activity and selectivity. Compared with pristine Pd octahedra and common PdBi alloy NC, the unique heterodimer structure of the Pd@Bi-PdBi heterodimer NCs endows them with the highest electrocatalytic performance of EG and the best selectivity (≈93%) in oxidizing EG to glycolic acid (GA). Taken together, this work not only heralds a new strategy for UPD-directed synthesis of bimetallic NCs, but also provides a new design paradigm for steering the selectivity of electrocatalysts.

Cu-Modified Palladium Catalysts: Boosting Formate Electrooxidation via Interfacially OHad-Driven Had Removal

Direct formate fuel cells have gained traction due to their eco-friendly credentials and inherent safety. However, their potential is hampered by the kinetic challenges of the formate oxidation reaction (FOR) on Pd-based catalysts, chiefly due to the unfavorable adsorption of hydrogen species (Had). These species clog the active sites, hindering efficient catalysis. Here, we introduce a straightforward strategy to remedy this bottleneck by incorporating Pd with Cu to expedite the removal of Pd-Had in alkaline media. Notably, Cu plays a pivotal role in bolstering the concentration of hydroxyl adsorbates (OHad) on the surface of catalyst. These OHad species can react with Had, effectively unblocking the active sites for FOR. The as-synthesized catalyst of PdCu/C exhibits a superior FOR performance, boasting a remarkable mass activity of 3.62 A mg-1. Through CO-stripping voltammetry, we discern that the presence of Cu in Pd markedly speeds up the formation of adsorbed hydroxyl species (OHad) at diminished potentials. This, in turn, aids the oxidative removal of Pd-Had, leveraging a synergistic mechanism during FOR. Density functional theory computations further reveal intensified interactions between adsorbed oxygen species and intermediates, underscoring that the Cu-Pd interface exhibits greater oxyphilicity compared to pristine Pd. In this study, we present both experimental and theoretical corroborations, unequivocally highlighting that the integrated copper species markedly amplify the generation of OHad, ensuring efficient removal of Had. This work paves the way, shedding light on the strategic design of high-performing FOR catalysts.

Telluride-Based Materials: A Promising Route for High Performance Supercapacitors

As supercapacitor (SC) technology continues to evolve, there is a growing need for electrode materials with high energy/power densities and cycling stability. However, research and development of electrode materials with such characteristics is essential for commercialization the SC. To meet this demand, the development of superior electrode materials has become an increasingly critical step. The electrochemical performance of SCs is greatly influenced by various factors such as the reaction mechanism, crystal structure, and kinetics of electron/ion transfer in the electrodes, which have been challenging to address using previously investigated electrode materials like carbon and metal oxides/sulfides. Recently, tellurium and telluride-based materials have garnered increasing interest in energy storage technology owing to their high electronic conductivity, favorable crystal structure, and excellent volumetric capacity. This review provides a comprehensive understanding of the fundamental properties and energy storage performance of tellurium- and Te-based materials by introducing their physicochemical properties. First, we elaborate on the significance of tellurides. Next, the charge storage mechanism of functional telluride materials and important synthesis strategies are summarized. Then, research advancements in metal and carbon-based telluride materials, as well as the effectiveness of tellurides for SCs, were analyzed by emphasizing their essential properties and extensive advantages. Finally, the remaining challenges and prospects for improving the telluride-based supercapacitive performance are outlined.

RuSe2-CoTe Heterogeneous Surfaces Coated with NC Layer for Excellent HER Performance under Alkaline Condition

Electrocatalytic hydrogen production has been a promising high-purity hydrogen production technology, attracting a large number of researchers' research interest. Ru has a hydrogen binding capacity similar to Pt, but its price is far lower than Pt, making it a promising alternative to Pt. However, a single Se electronic structure modulation is not sufficient to enable RuSe2 to be used for practical applications on a large scale due to the lack of electrons. Therefore, choosing a suitable way to electronically modulate the Ru atoms in RuSe2 can effectively improve the activity of the catalyst. Cobalt telluride (CoTe) can significantly enhance electrocatalytic performance due to tellurium's low electronegativity and excellent metal properties. In this work, the NC layer possesses excellent electrical conductivity and CoTe acts as an electron donor to optimize the electronic structure locally and trigger electron transfer efficiently. The RuSe2-CoTe/NC electrode requires an overpotential of only 25.4 mV (10 mA cm-2), which is superior to that of RuSe2/NF (65 mV) and CoTe/NC (115 mV). Meanwhile, the Tafel slope of RuSe2-CoTe/NC (67.8 mV dec-1) was better than that of RuSe2/NF (113.6 mV dec-1) and CoTe/NC (209.5 mV dec-1), showing that the build-up of the superior heterojunction makes the RuSe2-CoTe/NC with better hydrogen evolution reaction (HER) reaction kinetics. In addition, after 30 h of long-term stability testing, no significant decrease in catalytic activity was observed, proving the good stability of the RuSe2-CoTe/NC catalyst.

Cu2+-regulated one-pot wet-chemical synthesis of uniform PdCu nanostars for electrocatalytic oxidation of ethylene glycol and glycerol

The fabrication of effective and stable electrocatalysts is crucial for practical applications of direct alcohol fuel cells (DAFCs). In this study, bimetallic PdCu nanostars (PdCu NSs) were fabricated by a Cu²⁺-modulated one-pot wet-chemical method, where cetyltrimethyl ammonium bromide (CTAB) worked as a structure-regulating reagent. The morphology, compositions, crystal structures and formation mechanism of the as-prepared PdCu NSs were investigated by a series of techniques. The unique architectures created abundant active sites, which resulted in a large electrochemical active surface area (9.5 m² g^-1). The PdCu NSs showed negative shifts in the onset potentials and large forward peak current densities by contrast with those of commercial Pd black for the catalytic ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR). It revealed that the PdCu NSs outperformed Pd black in the similar surroundings. This work provides a constructive strategy for fabrication of high-efficiency electrocatalysts for alcohol fuel cells.

Two-birds with one stone: Improving both cathode and anode electrochemical performances via two-dimensional Te-CoTe2/rGO ultrathin nanosheets as sulfur hosts in lithium-sulfur batteries

A Te-doped CoTe₂ film could be grown in situ on reduced graphene oxide (rGO) to develop a Te-CoTe₂/rGO composite with an ultrathin layered structure, which has multiple protective effects on both the sulfur positive electrode and lithium negative electrode in lithium sulfur (Li-S) batteries. The Te-CoTe₂/rGO composite as a sulfur host not only shows a strong adsorbing ability for lithium polysulfides (LiPSs) but can also accelerate the conversion reaction of active material sulfur during the charging/discharging process. More importantly, this host can turn the shuttle effect from an unfavorable factor to a favorable factor, which could improve the electrochemical performance of the lithium anode with uniform lithium plating/stripping resulting from the intermediate polytellurosulfide species (Li₂Te_xS_y), which could be generated on the cathode surface via Te reacting with soluble Li₂S_n (4 ≤ n ≤ 8). As a result, the S@Te-CoTe₂/rGO cathode shows a discharge capacity of 970.0 mA h g^-1 in the first cycle at 1 C and retains a high capacity of 545.5 mA h g^-1 after 1000 cycles, corresponding to a low capacity decay rate of only 0.043% per cycle. In addition, in situ X-ray diffraction (XRD) and in situ Raman were used to explore the sulfur conversion process. This study not only demonstrates that a two-dimensional (2D) ultrathin Te-CoTe₂/rGO composite is successfully developed with multiple effects on Li-S batteries but also opens a new pathway for designing unique sulfur hosts to promote the electrochemical performance of Li-S batteries.

Principles of Design and Synthesis of Metal Derivatives from MOFs

Materials derived from metal-organic frameworks (MOFs) have demonstrated exceptional structural variety and complexity and can be synthesized using low-cost scalable methods. Although the inherent instability and low electrical conductivity of MOFs are largely responsible for their low uptake for catalysis and energy storage, a superior alternative is MOF-derived metal-based derivatives (MDs) as these can retain the complex nanostructures of MOFs while exhibiting stability and electrical conductivities of several orders of magnitude higher. The present work comprehensively reviews MDs in terms of synthesis and their nanostructural design, including oxides, sulfides, phosphides, nitrides, carbides, transition metals, and other minor species. The focal point of the approach is the identification and rationalization of the design parameters that lead to the generation of optimal compositions, structures, nanostructures, and resultant performance parameters. The aim of this approach is to provide an inclusive platform for the strategies to design and process these materials for specific applications. This work is complemented by detailed figures that both summarize the design and processing approaches that have been reported and indicate potential trajectories for development. The work is also supported by comprehensive and up-to-date tabular coverage of the reported studies.

Rhodium metallene-supported platinum nanocrystals for ethylene glycol oxidation reaction

Low-temperature fuel cells have great application potential in electric vehicles and portable electronic devices, which need advanced electrocatalysts. Controlling the composition and morphology of electrocatalysts can effectively improve their catalytic performance. In this work, a Rh metallene (Rhlene)-supported Pt nanoparticle (Pt/Rhlene) electrocatalyst is successfully synthesized by a simple chemical reduction method, in which ultra-small Pt nanoparticles are uniformly attached to the Rhlene surface due to the high surface area of Rhlene. Pt/Rhlene reveals a 3.60-fold Pt-mass activity enhancement for the ethylene glycol oxidation reaction in alkaline solution compared with commercial Pt black, and maintains high stability and excellent poisoning-tolerance during electrocatalysis, owing to the specific physical/chemical properties of Rhlene. The superior electrocatalytic performance of Pt/Rhlene may open an avenue to synthesize other metallene-supported noble metal nanoparticle hybrids for various electrocatalytic applications.