Reversible polymerization of carbon dots based on dynamic covalent imine bond

Double-network polyphenol chitosan hydrogels with instant aldehyde-β-cyclodextrin-based structure as potential for treating bacterially infected wounds

Treatment of multiple bacterial infected wounds by eliminating bacteria and promoting tissue regeneration remains a clinical challenge. Herein, dual-network hydrogels (CS-GA/A-β-CD) with snap-structure were designed to achieve curcumin immobilization, using gallic acid-grafted chitosan (CS-GA) and aldehyde-β-cyclodextrin (A-β-CD) crosslinked. A-β-CD were able to achieve rapid dissolution (≥222.35 mg/mL H2O), and helped CS-GA/A-β-CD achieve rapid gelation (≤66.23 s). By adjusting the ratio of aldehyde groups of A-β-CD, mechanical properties and drug release can be controlled. CS-GA/A-β-CD/Cur exhibited excellent antimicrobial properties against S. aureus, E. coli, and P. aeruginosa. In vivo experiments demonstrated that CS-GA/A-β-CD/Cur achieved acute bacterial infection wound healing after 20th days, proving its great potential for wound dressing.

Influence of Carboxymethyl Chitosan and Sodium Humate Composite Corrosion Inhibitor on the Corrosion Resistance of EH40 Steel in Seawater

In this study, corrosion weight loss experiments were conducted to explore the corrosion-inhibiting properties of a composite inhibitor consisting of carboxymethyl chitosan (CMCS) and sodium humate (SH) at varying concentrations on EH40 steel in seawater. An investigation was conducted into the electrochemical behavior of EH40 steel in seawater and the mechanism of composite inhibitor consisting of carboxymethyl chitosan (CMCS) and sodium humate (SH) at varying concentrations on EH40 steel in seawater through an electrochemical test. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy and energy-dispersion spectroscopy (SEM-EDS), Fourier transform infrared absorption spectroscopy (FTIR), and contact angle measurements were performed to confirm the mechanism of CMCS and SH as well as their composite corrosion inhibitors at the interface between seawater and EH40 steel. Furthermore, density functional theory (DFT) calculation supports the experimental findings. The results show that CMCS, SH, and their composite inhibitor are a mixed type of corrosion inhibitor that mainly inhibits cathodic reactions and corrosion through the active site blocking mechanisms. Their corrosion inhibition effect increases with the increase of mass concentration, and the composite inhibitor performs better in corrosion inhibition and scale inhibition than the individual inhibitor. When the CMCS mass concentration reaches 100 mg/L and the SH mass concentration reaches 50 mg/L, the corrosion inhibition rate is 74.65%, the corrosion potential shifts by about 47.39 mV, the Rp value increases from 358.6 to 1102.4 Ω·cm2, and the Ydl value decreases from 177.31 Sn Ω-1cm-2 × 10-6 to 92.672 Sn Ω-1cm-2 × 10-6. CMCS and SH are adsorbed onto the surface of EH40 steel, forming a protective film through the complexation of carboxyl, amino, and other functional groups to inhibit corrosion and prevent the further formation of scale. In addition, synergistic coadsorption occurs between CMCS and SH, and the composite corrosion inhibitor exerts a better effect than the individual corrosion inhibitor.

Aggregation-induced-emission red carbon dots for ratiometric sensing of norfloxacin and anti-counterfeiting

The detection of trace antibiotic residues holds significant importance because it's related to food safety and human health. In this study, we developed a new high-yield red-emitting carbon dots (R-CDs) with aggregation-induced emission properties for ratiometric sensing of norfloxacin. R-CDs were prepared in 30 min using an economical and efficient microwave-assisted method with tartaric acid and o-phenylenediamine as precursors, achieving a high yield of 34.4 %. R-CDs showed concentration-dependent fluorescence and aggregation-induced-emission properties. A ratiometric fluorescent probe for detecting the norfloxacin was developed. In the range of 0-40 μM, the intensity ratio of two emission peaks (I445 nm/I395 nm) towards norfloxacin show good linear relationship with its concentrations and a low detection limit was obtained (36.78 nM). In addition, complex patterns were developed for anti-counterfeiting based on different emission phenomenon at different concentrations. In summary, this study designed a novel ratiometric fluorescent probe for detection of norfloxacin, which greatly shortens the detection time and improves efficiency compared with high-performance liquid chromatography and other methods. The study will promote the application of carbon dots in anti-counterfeiting and other related fields, laying the foundation for the preparation of low-cost photosensitive anti-counterfeiting materials.

Dual-mode fluorimetric and colorimetric sensors based on iron and nitrogen co-doped carbon dots for the detection of dopamine

Determination of dopamine (DA) is crucial for its intimate relationship with clinical trials and biological environment. Herein, Fe, N co-doped carbon dots (AFC-CDs) were fabricated by optimizing precursors and reaction conditions for fluorimetric/colorimetric dual-mode sensing of DA. With synergistic influence of Förster resonance energy transfer and static quenching effect, DA significantly quenched the blue luminescence of AFC-CDs at 442 nm, the production of recognizable tan-brown complex caused evident colorimetric response, achieved the dual-mode fluorimetric/colorimetric sensing for DA. The excellent selectivity and satisfied sensitivity can be confirmed with the limit of detection at 0.29 μM and 2.31 μM via fluorimetric/colorimetric mode respectively. The reliability and practicability were proved by recovery of 94.81-101.61% in real samples. Notably, the proposed electron transfer way between AFC-CDs and DA was hypothesized logically, indicated dual-mode probe provided a promising platform for the sensing of trace DA, and could be expanded in environment and food safety.

Covalent post-synthetic modification of MOFs as a fluorescent sensor for the efficient detection of the biomarker of cystinuria

Cystinuria is a genetic disorder, and in severe cases, it might lead to kidney failure. As an important biomarker for cystinuria, the level of arginine (Arg) in urine is a vital indicator for cystinuria screening. Therefore, it is urgently needed to detect Arg with high selectivity and sensitivity. In this work, a boric acid functionalized Zr-based metal-organic framework UiO-PhbA is prepared by grafting phenylboronic acid on UiO-66-NH2 through a Schiff base reaction using a covalent post-synthesis modification (CPSM) strategy. The prepared UiO-PhbA exhibits a sensitive and specific fluorescence "turn-on" response to Arg and can be exploited to detect Arg in human serum and urine samples with a broad linear range of 0.6-350 µM and low limit of detection (LOD) of 18.45 nM. This study provides a new and reliable rapid screening protocol for sulfite oxidase deficiency-related diseases.

Enhancing On-Skin Analysis: A Microfluidic Device and Smartphone Imaging Module for Real-Time Quantitative Detection of Multianalytes in Sweat

Wearable sweat sensors present exciting opportunities for advancing personal health monitoring and noninvasive biomarker measurements. However, existing sensors often fall short in accurate detection of low analyte volumes and concentrations and lack multimodal sensing capabilities. Herein, we present a highly portable four-channel microfluidic device capable of conducting simultaneous sweat sampling and fluorometric sensing of potential biomarkers, such as l-Tyr, l-Trp, Crt, and NH4+, specifically designed for kidney disease monitoring. Our microfluidic device seamlessly integrates with smartphones, facilitating easy data retrieval and analysis. The core of the sensing array is a novel fluorometric solid-state mechanism utilizing carbon polymer dots derived from dopamine, catechol, and o-phenylenediamine monomers embedded in gelatin hydrogels. The sensors exhibit exceptional performance, offering linear ranges of 5-275, 6-170, 4-220, and 5-170 μM, with impressively low detection limits of 1.5, 1.2, 1.3, and 1.4 μM for l-Tyr, l-Trp, Crt, and NH4+, respectively. Through meticulous optimization of operational variables, comprising the temperature, sample volume, and assay time, we achieved the best performance of the device. Furthermore, the sensors exhibited remarkable selectivity, effectively distinguishing between biologically similar species and other potential biological compounds found in sweat. Our evaluation also extended to monitoring kidney diseases in patients and healthy individuals, showcasing the device's utility in world scenarios. Promising results showcase the potential of low-cost, multidiagnostic microfluidic sensor arrays, especially with synthetic skin integration, for enhanced disease detection and healthcare outcomes.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

Simple method for visual detection of nitrite using fluorescence and colorimetry by poly (tannic acid) nanoparticles

The nitration reaction of nitrite and phenolic substances was first used to identify and detect NO₂^- by taking fluorescent poly (tannic acid) nanoparticles (FPTA NPs) as sensing platform. With the low cost, good biodegradable and convenient water-soluble FPTA NPs, a fluorescent and colorimetric dual modes detecting assay was realized. In fluorescent mode, the linear detection range of NO₂^- was 0-36 μM, the LOD was as low as 3.03 nM, and the response time was 90 s. In colorimetric mode, the linear detection range of NO₂^- was 0-46 μM, and the LOD was as low as 27 nM. Besides, a smartphone with FPTA NPs@ agarose hydrogel formed a portable detection platform to test the fluorescent and visible color changes of FPTA NPs for NO₂^- sensing as well as for accurate visualization and quantitative detection of NO₂^- in actual water and food samples.

Carbon dots with hydrogen bond-controlled aggregation behavior

Here, hydrophilic carbon dots (H-CDs) are prepared by a facile room temperature method. The strength of hydrogen bonds can be controlled by introducing proton and aprotic solvents, respectively, so as to realize the tunable aggregation state of H-CDs. Because of the ultrasensitive response to dimethyl sulfoxide (DMSO), H-CDs can serve as optical probes for detecting DMSO in a linear range of 0.005% to 0.75% and with a detection limit of 0.001%.