Transformation of CoFe2O4 spinel structure into active and robust CoFe alloy/N-doped carbon electrocatalyst for oxygen evolution reaction

Gonçalves J, Breslin CB, Nossol E. Enhancing Oxygen Evolution Reaction Performance with rGO/CoNi-Prussian Blue-Derived Oxyhydroxide Nanocomposite Electrocatalyst: A Strategic Synthetic Approach

Electrochemical water splitting is a promising approach in the development of renewable energy technologies, providing an alternative to fossil fuels. It has attracted considerable attention in recent years. The benchmark materials used in water splitting are precious metals that are expensive and scarce. Therefore, this work proposes a strategic electrochemical synthesis of a reduced graphene oxide and cobalt-nickel hexacyanoferrate (rGO/CoNiHCF)-derived composite (rGO/CoNiPBd-OOH) to achieve optimized OER performance. The optimum rGO/CoNiHCF was fabricated with the Co:Ni precursors in a 3:1 ratio with a ferricyanide solution of pH = 1.0. Using an alkaline electrochemical treatment, the well-distributed globular particles of CoNiHCF over rGO sheets were converted into layered frameworks of metallic (oxy)hydroxide species, giving the final rGO/CoNiPBd-OOH nanocomposite. This nanocomposite presented favorable kinetic activity resulting in a Tafel slope of 33 mV dec-1, while rGO, CoNiPBd-OOH, and RuO2 exhibited slopes of 80, 47, and 51 mV dec-1, respectively. Although the benchmark RuO2 electrocatalyst showed a lower overpotential (240 mV dec-1) at a current density of 10 mA cm-2, the rGO/CoNiPBd-OOH performed well with an overpotential of 346 mV, combined with superior stability compared to CoNiPBd-OOH and RuO2, maintaining a current density of 10 mA cm-2 for 15 h with an overpotential loss of 6.92%. This work successfully presents an "all-electrochemical" synthesis of a rGO/CoNiHCF-derived material with remarkable electrocatalytic activity for OER assisted by a strategic preparation methodology, which helped to understand the influence of synthetic parameters and choose their conditions to achieve the optimum OER performance.

Leaf-like Multiphase Metal Phosphides as Bifunctional Oxygen Electrocatalysts toward Rechargeable Zinc-Air Batteries

Developing a bifunctional oxygen electrocatalyst is crucial to improve the reversibility and cycle life of a rechargeable zinc-air battery (RZAB). Here, transition metal phosphides (TMPs) with a leaf-like hierarchical structure and multiphase composition can be synthesized by the "alloying-dealloying-phosphating" strategy. The as-prepared P-NiCo(1:1) electrode takes advantage of its internal dense nanoholes and synergistic effects induced by NiCoP-containing polyphase to reveal multifunctional catalysis, such as OER and ORR. In combination of these advantages, P-NiCo(1:1) exhibits an extremely low OER overpotential of 220 mV at 10 mA cm-2, a higher half-wave potential of 0.79 V for ORR, and a smaller potential difference (ΔE) of 0.66 V. The liquid RZAB with P-NiCo(1:1) as a cathodic bifunctional catalyst delivers a higher open-circuit voltage (OCV), a larger power density of 175 mW cm-2, and longer cycling life for more than 180 h. Even when applied in solid-state flexible RZABs, the lightweight module could start high-power devices. With theoretical confirmation, the major phase NiCoP of P-NiCo(1:1) is helpful to increase the density of states, regulate the d-band center, and decrease the energy barrier to 2.13 eV, which are significantly superior to those of Co2P and Ni2P. It is believable that the synthetic strategy and activity-promoting mechanism acquired from this research can offer a guide to designing a promising rechargeable zinc-air battery system.

Carbonized Polydopamine-Based Nanocomposites: The Effect of Transition Metals on the Oxygen Electrocatalytic Activity

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are the most critical processes in renewable energy-related technologies, such as fuel cells, water electrolyzers, and unitized regenerative fuel cells. N-doped carbon composites have been demonstrated to be promising ORR/OER catalyst candidates because of their excellent electrical properties, tunable pore structure, and environmental compatibility. In this study, we prepared porous N-doped carbon nanocomposites (NC) by combining mussel-inspired polydopamine (PDA) chemistry and transition metals using a solvothermal carbonization strategy. The complexation between dopamine catechol groups and transition metal ions (Fe, Ni, Co, Zn, Mn, Cu, and Ti) results in hybrid structures with embedded metal nanoparticles converted to metal-NC composites after the carbonization process. The influence of the transition metals on the structural, morphological, and electrochemical properties was analyzed in detail. Among them, Cu, Co, Mn, and Fe N-doped carbon nanocomposites exhibit efficient catalytic activity and excellent stability toward ORR. This method improves the homogeneous distribution of the catalytically active sites. The metal nanoparticles in reduced (MnO, Fe₃C) or metallic (Cu, Co) oxidation states are protected by the N-doped carbon layers, thus further enhancing the ORR performance of the composites. Still, only Co nanocomposite is also effective toward OER with a potential bifunctional gap (ΔE) of 0.867 V. The formation of Co-N active sites during the carbonization process, and the strong coupling between Co nanoparticles and the N-doped carbon layer could promote the formation of defects and the interfacial electron transfer between the catalyst surface, and the reaction intermediates, increasing the bifunctional ORR/OER performance.