Sulfur vacancy and p-n junction synergistically boosting interfacial charge transfer and separation in ZnIn2S4/NiWO4 heterostructure for enhanced photocatalytic hydrogen evolution

Constructing a 3D Bi2WO6/ZnIn2S4 direct Z-scheme heterostructure for improved photocatalytic CO2 reduction performance

Developing efficient heterojunction photocatalysts with enhanced charge transfer and reduced recombination rates of photogenerated carriers is crucial for harnessing solar energy in the photocatalytic CO2 reduction into renewable fuels. This study employed electrostatic self-assembly techniques to construct a 3D Bi2WO6/ZnIn2S4 direct Z-scheme heterojunctions. The unique 3D structure provided abundant active sites and facilitated CO2 adsorption. Moreover, the optimized Bi2WO6/ZnIn2S4 composite demonstrated an impressive CH4 yield of 19.54 μmol g-1 under 4 h of simulated sunlight irradiation, which was about 8.73 and 16.30-fold higher than pure ZnIn2S4 and Bi2WO6. The observed enhancements in photocatalytic performance are attributed to forming a direct Z-scheme heterojunction, which effectively promotes charge transport and migration. This research introduces a novel strategy for constructing photocatalysts through the synergistic effect of morphological interface modifications.

A systematic review on Nb2O5-based photocatalysts: Crystallography, synthetic methods, design strategies, and photocatalytic mechanisms

With the increasing popularity of photocatalytic technology and the highly growing issues of energy scarcity and environmental pollution, there is an increasing interest in extremely efficient photocatalytic systems. The widespread immense attention and applicability of Nb2O5 photocatalysts can be attributed to their multiple benefits, including strong redox potentials, non-toxicity, earth abundance, corrosion resistance, and efficient thermal and chemical stability. However, the large-scale application of Nb2O5 is currently impeded by the barriers of rapid recombination loss of photo-activated electron/hole pairs and the inadequacy of visible light absorption. To overcome these constraints, plentiful design strategies have been directed at modulating the morphology, electronic band structure, and optical properties of Nb2O5. The current review offers an extensive analysis of Nb2O5-based photocatalysts, with a particular emphasis on crystallography, synthetic methods, design strategies, and photocatalytic mechanisms. Finally, an outline of future research directions and challenges in developing Nb2O5-based materials with excellent photocatalytic performance is presented.

Rational Photodeposition of Cobalt Phosphate on Flower-like ZnIn2S4 for Efficient Photocatalytic Hydrogen Evolution

The high electrons and holes recombination rate of ZnIn2S4 significantly limits its photocatalytic performance. Herein, a simple in situ photodeposition strategy is adopted to introduce the cocatalyst cobalt phosphate (Co-Pi) on ZnIn2S4, aiming at facilitating the separation of electron-hole by promoting the transfer of photogenerated holes of ZnIn2S4. The study reveals that the composite catalyst has superior photocatalytic performance than blank ZnIn2S4. In particular, ZnIn2S4 loaded with 5% Co-Pi (ZnIn2S4/5%Co-Pi) has the best photocatalytic activity, and the H2 production rate reaches 3593 μmol·g-1·h-1, approximately double that of ZnIn2S4 alone. Subsequent characterization data demonstrate that the introduction of the cocatalyst Co-Pi facilitates the transfer of ZnIn2S4 holes, thus improving the efficiency of photogenerated carrier separation. This investigation focuses on the rational utilization of high-content and rich cocatalysts on earth to design low-cost and efficient composite catalysts to achieve sustainable photocatalytic hydrogen evolution.

Construction of PdSe2/ZnIn2S4 heterojunctions with covalent interface for highly efficient photocatalytic hydrogen evolution

Constructing semiconductor heterojunctions can enable novel schemes for highly efficient photocatalytic activity. However, introducing strong covalent bonding at the interface remains an open challenge. Herein, ZnIn2S4 (ZIS) with abundant sulfur vacancies (Sv) is synthesized with the presence of PdSe2 as an additional precursor. The sulfur vacancies of Sv-ZIS are filled by Se atoms of PdSe2, leading to the Zn-In-Se-Pd compound interface. Our density functional theory (DFT) calculations reveal the increased density of states at the interface, which will increase the local carrier concentration. Moreover, the length of the Se-H bond is longer than that of the SH bond, which is good for the evolution of H2 from the interface. In addition, the charge redistribution at the interface results in a built-in field, providing the driving force for efficient separation of photogenerated electron-hole. Therefore, the PdSe2/Sv-ZIS heterojunction with strong covalent interface exhibits an excellent photocatalytic hydrogen evolution performance (4423 μmol g-1h-1) with an apparent quantum efficiency (λ > 420 nm) of 9.1 %. This work will provide new inspirations to improve photocatalytic activity by engineering the interfaces of semiconductor heterojunctions.

Rapid Microwave-Assisted Synthesis of ZnIn2S4 Nanosheets for Highly Efficient Photocatalytic Hydrogen Production

In this study, a facile and rapid microwave-assisted synthesis method was used to synthesize In₂S₃ nanosheets, ZnS nanosheets, and ZnIn₂S₄ nanosheets with sulfur vacancies. The two-dimensional semiconductor photocatalysts of ZnIn₂S₄ nanosheets were characterized by XRD, FESEM, BET, TEM, XPS, UV-vis diffuse reflectance, and PL spectroscopy. The ZnIn₂S₄ with sulfur vacancies exhibited an evident energy bandgap value of 2.82 eV, as determined by UV-visible diffuse reflectance spectroscopy, and its energy band diagram was obtained through the combination of XPS and energy bandgap values. ZnIn₂S₄ nanosheets exhibited about 33.3 and 16.6 times higher photocatalytic hydrogen production than In₂S₃ nanosheets and ZnS nanosheets, respectively, under visible-light irradiation. Various factors, including materials, sacrificial reagents, and pH values, were used to evaluate the influence of ZnIn₂S₄ nanosheets on photocatalytic hydrogen production. In addition, the ZnIn₂S₄ nanosheets revealed the highest photocatalytic hydrogen production from seawater, which was about 209.4 and 106.7 times higher than that of In₂S₃ nanosheets and ZnS nanosheets, respectively. The presence of sulfur vacancies in ZnIn₂S₄ nanosheets offers promising opportunities for developing highly efficient and stable photocatalysts for photocatalytic hydrogen production from seawater under visible-light irradiation.

Achieving improved full-spectrum responsive 0D/3D CuWO4/BiOBr:Yb3+,Er3+ photocatalyst with synergetic effects of up-conversion, photothermal effect and direct Z-scheme heterojunction

The key to obtain effective photocatalysts is to increase the efficiency of light energy conversion, and thus the design and implementation of full-spectrum photocatalysts is a potential approach to solve this problem especially by extending the absorption range to near-infrared (NIR) light. Herein, the improved full-spectrum responsive CuWO₄/BiOBr:Yb³⁺,Er³⁺ (CW/BYE) direct Z-scheme heterojunction was prepared. The CW/BYE with CW mass ratio of 5% had the best degradation performance, and the removal rate of tetracycline reached 93.9% in 60 min and 69.4% in 12 h under visible (Vis) and NIR light, respectively, which were 5.2 and 3.3 times of BYE. According to the outcome of experimental, the reasonable mechanism of improved photoactivity was put forward on the basis of (i) the up-conversion (UC) effect of Er³⁺ ion to convert NIR photon to ultraviolet or visible light, which can be used by CW and BYE, (ii) the photothermal effect of CW to absorb the NIR light, increasing the local temperature of photocatalyst particle to accelerate the photoreaction, and (iii) the formed direct Z-scheme heterojunction between BYE and CW to boost the separation of photogenerated electron-hole pairs. Additionally, the excellent photostability of the photocatalyst was verified by cycle degradation experiments. This work opens up a promising technique for designing and synthesizing full-spectrum photocatalysts by utilizing synergetic effects of UC, photothermal effect and direct Z-scheme heterojunction.

Defect-induced charge redistribution of MoO3-x nanometric wires for photocatalytic ammonia synthesis

Photocatalytic ammonia synthesis technology has become one of the effective methods to replace the Haber method for nitrogen fixation in the future for its low energy consumption and green environment. However, limited by the weak adsorption/activation ability of N₂ molecules at the photocatalyst interface, the efficient nitrogen fixation still remains a daunting job. Defect-induced charge redistribution as a catalytic site for N₂ molecules is the most prominent strategy to enhance the adsorption/activation of N₂ molecules at the interface of catalysts. In this study, MoO_3-x nanowires containing asymmetric defects were prepared by a one-step hydrothermal method via using glycine as a defect inducer. It is shown that at the atomic scale, the defect-induced charge reconfiguration can significantly improve the nitrogen adsorption and activation capacity and enhance the nitrogen fixation capacity; at the nanoscale, the charge redistribution induced by asymmetric defects effectively improved the photogenerated charge separation. Given the charge redistribution on the atomic and nanoscale of MoO_3-x nanowires, the optimal nitrogen fixation rate of MoO_3-x reached 200.35 µmol g^-1h^-1.