Nanoporous {Co3}-Organic framework for efficiently seperating gases and catalyzing cycloaddition of epoxides with CO2 and Knoevenagel condensation

Synthesis of a Zn(II)-2-aminoimidazole Framework as an Efficient Carbonic Anhydrase Mimic

Carbonic anhydrase (CA) plays a crucial role in the CO2 capture processes by catalyzing the hydration of CO2. In this study, we synthesized a bioinspired carbonic anhydrase Zn-MOF (metal-organic framework) incorporating 2-aminoimidazole and Zn2+ as initial constituents. The synthesized Zn-MOF exhibited promising potential for efficiently catalyzing the CO2 hydration. Structural analyses such as SEM, XRD, and BET confirmed that the Zn-MOF crystal consisted of stacked grains with an average size of approximately 36 nm, forming a micron-sized spherical structure. Functionally, Zn-MOF exhibited effective catalytic activity toward both CO2 hydration and ester hydrolysis. The introduction of amino groups significantly enhanced the esterase activity of Zn-MOF to 0.28 U/mg at ambient temperature, which was twice that of ZIF-8. Furthermore, the introduction of amino groups resulted in remarkable hydrothermal stability, with the esterase activity reaching 0.72 U/mg after undergoing hydrothermal treatment at 80 °C for 12 h. Additionally, Zn-MOF exhibited enhanced capability in CO2 hydration at a pH value exceeding 8.5. After six repeated uses, ZIF-8 and Zn-MOF retained approximately 68 and 65% of their initial enzyme activity, respectively, underscoring the potential practical applicability of Zn-MOF in industrial CO2 capture processes. This work showcases the development of a novel Zn-MOF crystal as an efficient CA mimic, effectively emulating the active sites of natural CA using 2-aminoimidazole as a coordinating ligand for Zn2+ coordination. These findings not only advance the field of innovative enzyme mimics but also pave the way for further exploration of industrial CO2 capture catalysts.

Defect-engineered indium-organic framework displays the higher CO2 adsorption and more excellent catalytic performance on the cycloaddition of CO2 with epoxides under mild conditions

In order to achieve the high adsorption and catalytic performance of CO2, the direct self-assembly of robust defect-engineered MOFs is a scarcely reported and challenging proposition. Herein, a highly robust nanoporous indium(III)-organic framework of {[In2(CPPDA)(H2O)3](NO3)·2DMF·3H2O}n (NUC-107) consisting of two kinds of inorganic units of chain-shaped [In(COO)2(H2O)]n and watery binuclear [In2(COO)4(H2O)8] was generated by regulating the growth environment. It is worth mentioning that [In2(COO)4(H2O)8] is very rare in terms of its richer associated water molecules, implying that defect-enriched metal ions in the activated host framework can serve as strong Lewis acid. Compared to reported skeleton of [In4(CPPDA)2(μ3-OH)2(DMF)(H2O)2]n (NUC-66) with tetranuclear clusters of [In4(μ3-OH)2(COO)10(DMF)(H2O)2] as nodes, the void volume of NUC-107 (50.7%) is slightly lower than the one of NUC-66 (52.8%). However, each In3+ ion in NUC-107 has an average of 1.5 coordinated small molecules (H2O), which far exceeds the average of 0.75 in NUC-66 (H2O and DMF). After thermal activation, NUC-107a characterizes the merits of unsaturated In3+ sites, free pyridine moieties, solvent-free nanochannels (10.2 × 15.7 Å2). Adsorption tests prove that the host framework of NUC-107a has a higher CO2 adsorption (113.2 cm3/g at 273 K and 64.8 cm3/g at 298 K) than NUC-66 (91.2 cm3/g at 273 K and 53.0 cm3/g at 298 K). Catalytic experiments confirmed that activated NUC-107a with the aid of n-Bu4NBr was capable of efficiently catalyzing the cycloaddition of CO2 with epoxides into corresponding cyclic carbonates under the mild conditions. Under the similar conditions of 0.10 mol% MOFs, 0.5 mol% n-Bu4NBr, 0.5 MP CO2, 60 °C and 3 h, compared with NUC-66a, the conversion of SO to SC catalyzed by NUC-107a increased by 21%. Hence, this work offers a valuable perspective that the in situ creation of robust defect-engineered MOFs can be realized by regulating the growth environment.

Robust {Pb10}-Cluster-Based Metal-Organic Framework for Capturing and Converting CO2 into Cyclic Carbonates under Mild Conditions

Developing a highly active catalyst that can efficiently capture and convert carbon dioxide (CO2) into high-value-added energy materials remains a severe challenge, which inspires us to explore effective metal-organic frameworks (MOFs) with high chemical stability and high-density active sites. Herein, we report a robust 3D lead(II)-organic framework of {(Me2NH2)2[Pb5(PTTPA)2(H2O)3]·2DMF·3H2O}n (NUC-111) with unreported [Pb10(COO)22(H2O)6] clusters (abbreviated as {Pb10}) as nodes (H6PTTPA = 4,4',4″-(pyridine-2,4,6-triyl)triisophthalic acid). After thermal activation, NUC-111a is functionalized by the multifarious symbiotic acid-base active sites of open Pb2+ sites and uncoordinated pyridine groups on the inner surface of the void volume. Gas adsorption tests confirm that NUC-111a displays a higher separation performance for mixed gases of f CO2 and CH4 with the selectivity of CO2/CH4 at 273 K and 101 kPa being 31 (1:99, v/v), 23 (15:85, v/v), and 8 (50:50, v/v), respectively. When the temperature rises to 298 K, the selectivity of CO2/CH4 at 101 kPa is 26 (1:99, v/v), 22 (15:85, v/v), and 11 (50:50, v/v). Moreover, activated NUC-111a exhibited excellent catalytic performance, stability, and recyclability for the cycloaddition of CO2 with epoxides under mild conditions. Hence, this work provides valuable insight into designing MOFs with multifunctionality for CO2 capture, separation, and conversion.

Metal Hydrogen-Bonded Organic Frameworks as Open Lewis Acid Catalysts for Two Types of CO2 Transformations

Efficient and multiple CO2 utilization into high-value-added chemicals holds significant importance in carbon neutrality and industry production. However, most catalysis systems generally exhibit only one type of CO2 transformation with the efficiency to be improved. The restricted abundance of active catalytic sites or an inefficient utilization rate of these sites results in the constraint. Consequently, we designed and constructed two metal hydrogen-bonded organic frameworks (M-HOFs) {[M3(L3-)2(H2O)10]·2H2O}n (M = Co (1), Ni (2); L = 1-(4-carboxyphenyl)-1H-pyrazole-3,5-dicarboxylic acid) in this research. 1 and 2 are well-characterized, and both show excellent stability. The networks connected by multiple hydrogen bonds enhance the structural flexibility and create accessible Lewis acidic sites, promoting interactions between the substrates and catalytic centers. This enhancement facilitates efficient catalysis for two types of CO2 transformations, encompassing both cycloaddition reactions with epoxides and aziridines to afford cyclic carbonates and oxazolidinones. The catalytic activities (TON/TOF) are superior compared with those of most other catalysts. These heterogeneous catalysts still exhibited high performance after being reused several times. Mechanistic studies indicated intense interactions between the metal sites and substrates, demonstrating the reason for efficient catalysis. This marks the first instance on M-HOFs efficiently catalyzing two types of CO2 conversions, finding important significance for catalyst design and CO2 utilization.

NB. Highly efficient CdS/CeO2/Ag3PO4 nanocomposite as novel heterogenous catalyst for Knoevenagel condensation and acetylation reactions

In light of environmental and economic concerns, the use of heterogeneous catalysts that can function under gentler reaction conditions has recently become popular. In this study by using the precipitation method, CdS/CeO2/Ag3PO4 ternary nanocomposites with varied molar proportions of CdS:CeO2/Ag3PO4 were produced. The catalysts' surface functional groups; morphology and crystal structures were examined using FTIR, SEM-EDX and XRD respectively. The catalytic efficiency of all synthesized nanomaterials was tested on a model Knoevenagel condensation reaction. For the best catalyst, selected from the screening, the optimization of reaction conditions such as the solvent, catalyst load, concentration of reagents such as malononitrile/acetic anhydride, and temperature. The ternary nanocomposite CdS/CeO2/Ag3PO4 (4:1) displayed higher catalytic activity (95.4 ± 3.2 %) than the rest of the nanomaterials prepared. Thus, the ternary nanocomposite CdS/CeO2/Ag3PO4 with 4:1 mol ratio with optimized reaction conditions was used to check the substrate scope of Knoevenagel condensation and acetylation reaction. The synthesized Knoevenagel condensation and acetylation reaction products were also characterized by proton and carbon NMR for their structure determination. The nanocomposite's reusability was carried out and only 7.5 ± 2 % decrement was witnessed after four runs and 23.3 % after the fifth run. and this indicates the potential application of the catalyst to organic reactions. Furthermore, we have proposed the possible catalytic mechanisms for both organic reactions.

Engineering the Activity and Stability of the Zn-MOF Catalyst via the Interaction of Doped Zr with Zn

Metallic atoms within metal-organic framework (MOF) materials exhibit a distinctive and adaptable coordination structure. The three-dimensional (3D) pore configuration of MOFs enables the complete exposure of metal active sites, rendering them prevalent in various catalytic reactions. In this study, zinc (Zn) atoms within Zn-based MOF materials, characterized by an abundance of valence electrons, are utilized for the transesterification of dimethyl carbonate (DMC). Additionally, the introduction of zirconium (Zr) effectively addresses the susceptibility of the MOFs' crystal structure to dissolution in organic solvents. The formulated catalyst, Zn-10%Zr-MOF(300), demonstrates remarkable catalytic performance with 91.5% DMC selectivity, 61.9% propylene carbonate (PC) conversion, and 56.6% DMC yield. Impressively, the catalyst maintains its high performance over five cycles. Results indicate that Zr interacts with Zn, forming new coordination bonds and enhancing the catalyst crystal structure stability. Moreover, electron transfer intensifies the alkalinity of the active Zn atoms, enhancing the overall catalyst performance. This research informs the development of transesterification heterogeneous catalysts and broadens the application scope of MOF catalysts.

Mechanochemical Encapsulation of Caffeine in UiO-66 and UiO-66-NH2 to Obtain Polymeric Composites by Extrusion with Recycled Polyamide 6 or Polylactic Acid Biopolymer

The development of capsules with additives that can be added to polymers during extrusion processing can lead to advances in the manufacturing of textile fabrics with improved and durable properties. In this work, caffeine (CAF), which has anti-cellulite properties, has been encapsulated by liquid-assisted milling in zirconium-based metal-organic frameworks (MOFs) with different textural properties and chemical functionalization: commercial UiO-66, UiO-66 synthesized without solvents, and UiO-66-NH2 synthesized in ethanol. The CAF@MOF capsules obtained through the grinding procedure have been added during the extrusion process to recycled polyamide 6 (PA6) and to a biopolymer based on polylactic acid (PLA) to obtain a load of approximately 2.5 wt% of caffeine. The materials have been characterized by various techniques (XRD, NMR, TGA, FTIR, nitrogen sorption, UV-vis, SEM, and TEM) that confirm the caffeine encapsulation, the preservation of caffeine during the extrusion process, and the good contact between the polymer and the MOF. Studies of the capsules and PA6 polymer+capsules composites have shown that release is slower when caffeine is encapsulated than when it is free, and the textural properties of UiO-66 influence the release more prominently than the NH2 group. However, an interaction is established between the biopolymer PLA and caffeine that delays the release of the additive.

Finely Tuning Metal Ion Valences of [Fe3-xMx(μ3-OH)(Carboxyl)6(pyridyl)2] Cluster-Based ant-MOFs for Highly Improved CO2 Capture Performances

Solvothermal reactions of different trinuclear precursors and 5-(pyridin-4-yl)isophthalic acid (H2L) successfully led to four anionic ant topological MOFs as Fe3-xMx(μ3-OH)(CH3COO)2(L)2·(DMA+)·DMF [M = Mn(II), Fe(II), Co(II), x = 0, 1, 2 and 3], namely, NJTU-Bai79 [NJTU-Bai = Nanjing Tech University Bai's group, Mn3(μ3-OH)], NJTU-Bai80 [Fe2Mn(μ3-OH)], NJTU-Bai81 [Fe3(μ3-OH)], and NJTU-Bai82 [Fe2Co(μ3-OH)], which possess the narrow pores (2.5-6.0 Å). NJTU-Bai80-82 is able to be tuned to the neutral derivatives [NJTU-Bai80-82(-ox), ox = oxidized] with M2+ ions oxidized to M3+ ones in the air and the OH- ions coordinated on M3+ ions. Very interestingly, selective CO2/N2 adsorptions of NJTU-Bai80-82(-ox) are significantly enhanced with the CO2 adsorption uptakes more than about 6 times that of NJTU-Bai79. GCMC simulations further revealed that neutral NJTU-Bai80-82(-ox) supplies more open frameworks around the -CH3 groups at separate spaces to the CO2 gas molecules with relatively more pores available to them after the removal of counterions. For the first time, finely tuning metal ion valences of metal clusters of ionic MOFs and making them from electrostatic to neutral were adopted for greatly improving their CO2 capture properties, and it would provide another promising strategy for the exploration of high-performance CO2 capture materials.