Nasolabial and alveolar morphology following presurgical orthopaedic treatment in complete unilateral clefts of lip, alveolus and palate

Applications and performance of artificial intelligence models in removable prosthodontics: A literature review

PURPOSE

In this narrative review, we present the current applications and performances of artificial intelligence (AI) models in different phases of the removable prosthodontic workflow and related research topics.

STUDY SELECTION

A literature search was conducted using PubMed, Scopus, Web of Science, and Google Scholar databases between January 2010 and January 2023. Search terms related to AI were combined with terms related to removable prosthodontics. Articles reporting the structure and performance of the developed AI model were selected for this literature review.

RESULTS

A total of 15 articles were relevant to the application of AI in removable prosthodontics, including maxillofacial prosthetics. These applications included the design of removable partial dentures, classification of partially edentulous arches, functional evaluation and outcome prediction in complete denture treatment, early prosthetic management of patients with cleft lip and palate, coloration of maxillofacial prostheses, and prediction of the material properties of denture teeth. Various AI models with reliable prediction accuracy have been developed using supervised learning.

CONCLUSIONS

The current applications of AI in removable prosthodontics exhibit significant potential for improving the prosthodontic workflow, with high accuracy levels reported in most of the reviewed studies. However, the focus has been predominantly on the diagnostic phase, with few studies addressing treatment planning and implementation. Because the number of AI-related studies in removable prosthodontics is limited, more models targeting different prosthodontic disciplines are required.

Regenerative Endodontic Procedure of Immature Permanent Teeth with Leukocyte and Platelet-rich Fibrin: A Multicenter Controlled Clinical Trial

INTRODUCTION

The aim of this nonrandomized, multicenter controlled clinical trial was to evaluate the impact of leukocyte-platelet-rich fibrin (LPRF) on regenerative endodontic procedures (REPs) of immature permanent teeth in terms of periapical bone healing (PBH) and further root development (RD).

METHODS

Healthy patients between 6-25 years with an inflamed or necrotic immature permanent tooth were included and divided between the test (= REP + LPRF) and control (= REP-LPRF) group depending on their compliance and the clinical setting (university hospital or private practice). After receiving REP ± LPRF, the patients were recalled after 3, 6, 12, 24, and 36 months. At each recall session, the teeth were clinically and radiographically (by means of a periapical radiograph [PR]) evaluated. A cone-beam computed tomographic (CBCT) imaging was taken preoperatively and 2 and 3 years postoperatively. PBH and RD were quantitatively and qualitatively assessed.

RESULTS

Twenty-nine teeth with a necrotic pulp were included, from which 23 (9 test and 14 control) were analyzed. Three teeth in the test group had a flare-up reaction in the first year after REP. Except for 2 no shows, all the analyzed teeth survived up to 3 years after REP, and, in case of failure, apexification preserved them. Complete PBH was obtained in 91.3% and 87% of the cases based on PR qualitative and quantitative evaluation, respectively, with no significant difference between the groups with respect to the baseline. The PR quantitative change in RD at the last recall session with respect to the baseline was not significant (all P values > .05) in both groups. The qualitative assessment of the type of REP root healing was nonuniform. In the test group, 55.6% of the teeth presented no RD and no apical closure. Only 50% of the 14 teeth assessed with CBCT imaging presented complete PBH. Regarding volumetric measurements on RD 3 years after REP for the change with respect to the baseline in root hard tissue volume, mean root hard tissue thickness, and apical area, the control group performed significantly in favor of RD than the test group (P = .03, .003, and 0.05 respectively). For the volumetric change 3 years after REP with respect to the baseline in root length and maximum root hard tissue thickness, no significant difference (P = .72 and .4, respectively) was found between the groups. The correlation between the PR and CBCT variables assessing RD was weak (root lengthening) to very weak (root thickening).

CONCLUSIONS

REP-LPRF seems to be a viable treatment option to obtain PBH and aid further RD of necrotic immature permanent teeth. Caution is needed when evaluating REP with PR.

Correlation between Nasoalveolar Molding and Surgical, Aesthetic, Functional and Socioeconomic Outcomes Following Primary Repair Surgery: a Systematic Review

OBJECTIVES

The authors performed a systematic review to evaluate the potential beneficial effects of the nasoalveolar molding appliance on nonsyndromic unilateral clefts of the lip and/or palate prior to primary lip repair.

MATERIAL AND METHODS

A literature search was performed using three electronic databases (PubMed, Embase, Web of Science) and three journals ("Cleft Palate-Craniofacial Journal", "Plastic and Reconstructive Surgery Journal" and "American Journal of Orthodontics and Dentofacial Orthopaedic") from January 1980 to April 2017. Data extraction was performed with tables treating different subjects: surgical, aesthetical, functional, socio-economical effects of nasoalveolar molding (NAM) appliances and the evolution of NAM appliances, especially three-dimensional technology.

RESULTS

Of the 145 articles retrieved in the literature surveys, 28 were qualified for the final analysis and 20 studies were excluded because of their small sample size (less than 10 patients) and/or too long follow-up (exceeded 18 months). Four randomized controlled trials were available. Although literature allowed discussing the short-term benefits of NAM appliance and the three-dimensional technology, scientific evidence is lacking.

CONCLUSIONS

Based on the results, nasoalveolar molding appliances have positive surgical, aesthetical, functional and socio-economical effects on unilateral clefts of the lip and/or palate treatment before the primary repair surgeries. Three-dimensional technology results in a more efficient and predictable nasoalveolar molding appliance treatment. However, nasoalveolar molding appliance effect in a short term remains unclear with the available literature. Further studies that integrate three-dimensional technology in a large scale are still needed.

Long-term effect of presurgical nasoalveolar molding on growth of maxillary arch in unilateral cleft lip and palate: randomized controlled trial

The objective of this study was to investigate the long-term effect of presurgical nasoalveolar molding (PNAM) on growth of the maxillary arch through early childhood until 6 years of age in complete unilateral cleft lip and palate (UCLP) patients presenting for PNAM at different ages. Complete UCLP patients who were treated at our centre were divided into two groups. The study group underwent PNAM and was further subdivided into three subgroups (PNAM initiated within 1 month, between 1 and 6 months, and between 6 and 12 months of age in subgroup I, II, and III, respectively). The control group did not undergo PNAM and was further subdivided into three subgroups. Patients were evaluated at T1 (first visit), T2 (before cheiloplasty), and T3 (at 6 years). Between T1and T2, the intersegment distance (ISD) reduced significantly in the study group but increased in the control group, whereas the intercanine width (ICW) in both the study and control groups did not show significant change. Between T2 and T3, ISD and ICW were reduced significantly in the control group due to arch collapse, whereas in the study group, ISD reduced slightly with ICW remaining almost similar to noncleft norms. We conclude that reduced ISD following PNAM improves arch symmetry and stability, and thus may prevent arch collapse in the long term.

Measuring Symmetry in Children With Unrepaired Cleft Lip: Defining a Standard for the Three-Dimensional Midfacial Reference Plane

OBJECTIVE

Quantitative measures of facial form to evaluate treatment outcomes for cleft lip (CL) are currently limited. Computer-based analysis of three-dimensional (3D) images provides an opportunity for efficient and objective analysis. The purpose of this study was to define a computer-based standard of identifying the 3D midfacial reference plane of the face in children with unrepaired cleft lip for measurement of facial symmetry.

PARTICIPANTS

The 3D images of 50 subjects (35 with unilateral CL, 10 with bilateral CL, five controls) were included in this study.

INTERVENTIONS

Five methods of defining a midfacial plane were applied to each image, including two human-based (Direct Placement, Manual Landmark) and three computer-based (Mirror, Deformation, Learning) methods.

MAIN OUTCOME MEASURE

Six blinded raters (three cleft surgeons, two craniofacial pediatricians, and one craniofacial researcher) independently ranked and rated the accuracy of the defined planes.

RESULTS

Among computer-based methods, the Deformation method performed significantly better than the others. Although human-based methods performed best, there was no significant difference compared with the Deformation method. The average correlation coefficient among raters was .4; however, it was .7 and .9 when the angular difference between planes was greater than 6° and 8°, respectively.

CONCLUSIONS

Raters can agree on the 3D midfacial reference plane in children with unrepaired CL using digital surface mesh. The Deformation method performed best among computer-based methods evaluated and can be considered a useful tool to carry out automated measurements of facial symmetry in children with unrepaired cleft lip.

Measuring Symmetry in Children With Cleft Lip. Part 2: Quantification of Nasolabial Symmetry Before and After Cleft Lip Repair

OBJECTIVE

The first part of this study validated an automated computer-based method of identifying the three-dimensional midfacial plane in children with unrepaired cleft lip. The purpose of this second part is to develop computer-based methods to quantify symmetry and to determine the correlation of these measures to clinical expectations.

PARTICIPANTS

A total of 35 infants with unrepaired unilateral cleft lip and 14 infant controls.

INTERVENTIONS

Six computer-based methods of quantifying symmetry were developed and applied to the three-dimensional images of infants with unilateral cleft lip before and after cleft lip repair and to those of controls.

MAIN OUTCOME MEASURE

Symmetry scores for cleft type, changes with surgery, and individual subjects ranked according to cleft severity were assessed.

RESULTS

Significant differences in symmetry scores were found between cleft types and found before and after surgery. Symmetry scores for infants with unilateral cleft lip approached those of controls after surgery, and there was a strong correlation with ranked cleft severity.

CONCLUSIONS

Our computer-based three-dimensional analysis of nasolabial symmetry correlated with clinical expectations. Automated processing made measurement convenient. Use of these measures may help to objectively measure cleft severity and treatment outcome.

Changes in nose symmetry in unilateral cleft lip and palate treated by differing pre-surgical assistance: An objective assessment of primary repair

BACKGROUND

Residual deformity of the nose, not lip, continues to be the greater challenge in UCCLP rehabilitation. Platform distortions often re-emerge following primary reconstruction revealing the stereotypical cleft-nose. Nasal alveolar molding reduces nose asymmetry. However, this study applies directional mechanics to the underlying platform distortions and soft tissue nose, introducing a novel device addressing the distorted septo-premaxillary junction.

METHODS

Retrospective assessment of 47 UCCLP patients by 2-dimensional photographic analysis with 24 subjects treated by dento-maxillary advancement (DMA) and nasal septum button-head pin (NSBP), 17 having nasal molding (NM), compared to 23 subjects without nose treatment, 16 with DMA and 7 with passive plates. Measurements were assessed by t tests, ≤ 05 confidence.

RESULTS

Frontal view: nose-treatment sample achieved ideal ala-bases vertical symmetry (p = 0.00065 & 0.00073); significantly improved ala-rims "slump" angle (p = 0.0071). Both samples had nose positioning within the facial frame like non-cleft population. Sub-nasal view: significant differences were for columella angle (p = 0.0015), nares "offset" (p = 0.002), and columella symmetry (p = 0.022) with nose-treatment achieving near ideal columella symmetry score (0.92) vs. (0.81).

CONCLUSIONS

NM and the novel NSBP procedures integrated with the platform correction effect of the DMA successfully treated at three distorted anatomic-levels native to UCCLP to improve nasal aesthetics.

Effect of lip closure on early maxillary growth in patients with cleft lip and palate

IMPORTANCE

Debate continues about the cause of midfacial growth disturbance in patients with facial clefts.

OBJECTIVE

To evaluate the functional effect of surgical closure of the lip before palatal closure according to the technique by Delaire on early maxillary growth in patients with complete unilateral cleft lip and palate.

DESIGN, SETTING, AND PARTICIPANTS

Twenty-two patients with unilateral cleft lip and palate were studied using plaster casts obtained at the time of cheilorhinoplasty and 6 months later before palatal closure. The interrupted lateral muscles were anatomically repositioned using the surgical technique by Delaire. No patients had received preoperative orthodontic treatment or a passive palatal plate. Cast analyses were performed using a digital caliper.

MAIN OUTCOMES AND MEASURES

Landmark positioning was performed 3 times by 2 different examiners to define intraobserver and interobserver differences. The final maxilla dimensions were recorded as the distances between the mean landmark positions. Using the t test, dimensions obtained before palatal closure were compared with dimensions obtained before lip closure.

RESULTS

The method allowed good reproducibility. Functional closure of the lip significantly narrowed the transverse anterior cleft areas by -2.36 mm (P < .05). Sagittal variables were increased by 1.68 mm on the nonaffected side and by 1.48 mm on the affected side (P < .05 for both).

CONCLUSIONS AND RELEVANCE

Functional closure according to the technique by Delaire narrows the transverse dimensions of the maxilla, while simultaneously preserving initial sagittal growth.

LEVEL OF EVIDENCE

4.

Recovering the personal identity of an elderly patient with cleft lip: a case report

Instances of unoperated cleft lip and/or palate (CLP) in adult or elderly patients are still seen in developing countries. This paper presents the multidisciplinary management and the personal identity revival of a 72-year-old patient with unoperated unilateral complete cleft lip. The facial deformity was characterized by a protrusion of the excess of orbicularis oris muscle, irregularities of the upper lip, nose distortion, and septum deviation to the cleft side. The patient was edentulous with the maxillary alveolar ridge collapsed and an associated fistula. The cleft lip was repaired using the Tennison-Randall technique and complete dentures were delivered after the oroantral fistula had been closed. The patient was very pleased with the improvement in speech and eating and she approved of her facial esthetics. The existence of unoperated oral clefts in the elderly population highlights the need to improve policies in treating patients with CLP, mainly in developing countries.

The morphological features and developmental changes of the philtral dimple: a guide to surgical intervention in cases of cleft lip

OBJECTIVE

This study was undertaken to analyse in detail the morphological features of the philtral dimple and the developmental changes of philtral morphology, including a comparison with patients with a cleft lip.

PATIENTS AND PARTICIPANTS

Fifty-five normal Japanese adults, seventy-five children and fifteen patients with complete unilateral cleft lip were referred for analysis.

DESIGN

3D facial data were acquired with a non-contacting laser scanner. We calculated the desired linear and angular components, defining the features of the philtrum with analysing software.

RESULTS

The philtral dimple was morphologically expressed by the two different deepest points in the horizontal and sagittal sectional view, respectively. These decreased with age and did not show any correlation. In contrast, philtral measurements on the X-Y coordinates increased during the course of development. Most of the linear and angular variables in the patients with the cleft lip had exhibited greater values than the normal subjects, reflecting the deformed philtral morphology.

CONCLUSIONS

To obtain an optimally natural philtral construction accompanied by a symmetrical lip in cleft surgery, it is critical to take into consideration both the geometric features of the philtral depth and age-appropriate morphological features of the philtrum as objective criteria.

Presurgical orthopaedic nasoalveolar molding in cleft lip and palate infants: a comparative evaluation of cases done with and without nasal stents

Addressing the craniofacial anomaly of cleft lip and palate presurgically has been done since more than 50 years now, with a constant improvisation of the treatment protocols from time to time. The present study deals with a modification of the technique devised 16 years ago. The effect of nasal stents attached to a pre-surgical naso-alveolar molding (PNAM) appliance on the nasal morphology achieved prior to primary surgical correction of the cleft lip was to be evaluated. Twenty subjects, infants with cleft lip and palate, less than 2 months of age were selected for presurgical nasoalveolar molding treatment. Impressions were recorded, casts made and PNAM appliance fabricated. Ten infants were given the appliance without nasal stents and to the other ten appliances nasal stents were added. The patients were recalled every 2-3 weeks and a series of 9 measurements were recorded every visit along with adjustments made to the appliance for desirable effects on the lip, alveolus and nose. This was carried out till the patient was taken up for lip repair. The final measurements obtained at the end of the presurgical treatment were recorded. Mann-Whitney test, between study and control group showed that the increase in the columella length was statistically significant (p = 0.0001 and p = 0.033) in the study group as compared to the control group. Also the increase of the nasal tip projection (mean = 1.30 mm) in the study group was found to be statistically significant (p = 0.006) as compared to the control group. We concluded that nasal stents attached to the alveolar molding appliance, yield significant improvement of the nasal morphology and better nasal aesthetics presurgically.

Evaluation of a 3D Stereophotogrammetric Technique to Measure the Stone Casts of Patients with Unilateral Cleft Lip and Palate

Objective

To assess a three-dimensional stereophotogrammetric method for palatal cast digitization of children with unilateral cleft lip and palate.

Design

As part of a collaboration between the University of Milan (Italy) and the University CES of Medellin (Colombia), 96 palatal cast models obtained from neonatal patients with unilateral cleft lip and palate were obtained and digitized using a three-dimensional stereophotogrammetric imaging system.

Main Outcome Measures

Three-dimensional measurements (cleft width, depth, length) were made separately for the longer and shorter cleft segments on the digital dental cast surface between landmarks, previously marked. Seven linear measurements were computed. Systematic and random errors between operators' tracings, and accuracy on geometric objects of known size were calculated. In addition, mean measurements from three-dimensional stereophotographs were compared statistically with those from direct anthropometry.

Results

The three-dimensional method presented good accuracy error (<0.9%) on measuring geometric objects. No systematic errors between operators' measurements were found ( p > .05). Statistically significant differences ( p < 5%) were noted for different methods (caliper versus stereophotogrammetry) for almost all distances analyzed, with mean absolute difference values ranging between 0.22 and 3.41 mm. Therefore, rates for the technical error of measurement and relative error magnitude were scored as moderate for Ag-Am and poor for Ag-Pg and Am-Pm distances. Generally, caliper values were larger than three-dimensional stereophotogrammetric values.

Conclusions

Three-dimensional stereophotogrammetric systems have some advantages over direct anthropometry, and therefore the method could be sufficiently precise and accurate on palatal cast digitization with unilateral cleft lip and palate. This would be useful for clinical analyses in maxillofacial, plastic, and aesthetic surgery.

Facial dimensions of Malay children with repaired unilateral cleft lip and palate: a three dimensional analysis

This comparative cross-sectional study assessed the facial surface dimensions of a group of Malay children with unilateral cleft lip and palate (UCLP) and compared them with a control group. 30 Malay children with UCLP aged 8-10 years and 30 unaffected age-matched children were voluntarily recruited from the Orthodontic Specialist Clinic in Hospital Universiti Sains Malaysia (HUSM). For the cleft group, lip and palate were repaired and assessment was performed prior to alveolar bone grafting and orthodontic treatment. The investigation was carried out using 3D digital stereophotogrammetry. 23 variables and two ratios were compared three-dimensionally between both groups. Statistically significant dimensional differences (P<0.05) were found between the UCLP Malay group and the control group mainly in the nasolabial region. These include increased alar base and alar base root width, shorter upper lip length, and increased nose base/mouth width ratio in the UCLP group. There were significant differences between the facial surface morphology of UCLP Malay children and control subjects. Particular surgical procedures performed during primary surgeries may contribute to these differences and negatively affect the surgical outcome.

Sagittal maxillary growth in children with unilateral cleft of the lip, alveolus and palate at the age of 10 years: an intercentre comparison

OBJECTIVE

Aim of this intercentre study was to compare sagittal facial growth in children with unilateral cleft lip and palate treated with different surgical protocols. A first evaluation had been carried out at the age of 6 years, now the patients have been re-evaluated at the age of 10 years.

MATERIAL AND METHOD

22 patients had been analyzed in centre 1, 32 patients in centre 2. All patients had presurgical orthopaedics. Centre 1 had lip repair at the age of 3 months and one-stage palatal closure with 1 year. Centre 2 had lip repair with 6 months, soft palate repair at 12 and hard palate repair at the age of 30 months. Sagittal growth was evaluated on lateral cephalograms. As control, data of 35 non-cleft children were used. Statistical analysis was carried out with student's t-test, multiple comparisons with Bonferroni.

RESULTS

There was considerably normal sagittal facial growth in centre 1, with tendency of forward growth of the mandible. In centre 2 there was a slight decrease in sagittal maxillary and mandibular growth with unchanged intergnathic relation. There was no statistically significant difference in sagittal growth between the centres. A re-evaluation has to be carried out after the final growth spurt.

A new method to quantify subtle morphological deformities in nasal profile curvatures and its application for analysis of unilateral cleft lip noses

OBJECTIVE

The authors conducted the present study to elucidate what elements characterize the nasal profiles of patients with unilateral cleft lips (CLs).

MATERIALS AND METHODS

A total of 40 Japanese unilateral CL patients were studied. For each patient, the nasal profile curve was traced on three-dimensional computer tomography image. Then four points were marked on the contour. The points were NAS (Nasion), MAP (the Most Anterior Point on the nasal profile curve), GPRN (the Genuine Pronasale: the point on the nasal curve at which the curve protrudes most), and SBN (Subnasale: the point at the columellar base). Using specially designed software, the distances between these marking points were measured along the nasal profile curve.

RESULTS

In CL patients, the distance between the MAP and GPRN is longer, and the GPRN is located more inferiorly than in non-cleft persons.

CONCLUSION

The nasal tip tends to become round and to droop in unilateral CL patients. In order to avoid this deformity pattern, the nasal tip should be reshaped to present a sharper curvature and corrected superiorly.

Sagittal growth of the facial skeleton of 6-year-old children with a complete unilateral cleft of lip, alveolus and palate treated with two different protocols

OBJECTIVE

The purpose of the study was to compare sagittal growth of the facial skeleton of 6-year-old children treated in two cleft centres with different surgical protocols.

MATERIAL AND METHODS

Each group consisted of 20 consecutive non-syndromic children with complete unilateral cleft lip, alveolus and palate. They all had presurgical orthopaedics with a passive plate and external strapping until lip repair. Centre 1 had lip repair at the age of 3 months and one stage palatal closure at the age of 1 year. Closure of the alveolar cleft was planned at 9 years with bone grafting. In centre 2 lip repair was performed at the age of 6 months, soft palate repair at 12 months and hard palate repair together with mucoperiosteal closure of the alveolar cleft at the age of 30 months. At the time of investigation, the children from both centres had not received any postoperative orthodontic treatment. Sagittal growth was evaluated on lateral cephalograms using the angles SNA, SNB, ANB and SNPg. For control, Droschl standards were used. The Mann-Whitney U test was used for statistical analysis.

RESULTS

There was no statistically significant difference in SNA, SNB, ANB and SNPg between the centres at the age of 6 years. There were no children with a class III jaw relationship. The sagittal dimensions were close to the values of non-cleft control persons (Droschl standards).

CONCLUSION

There was considerable similar sagittal growth of the facial skeleton in both centres which has not been affected by the different surgical protocols so far. A final evaluation should be delayed until the growth of the facial skeleton is complete.

Potential and limits of achieving neutral occlusion in patients with clefts of lip, alveolus and palate

INTRODUCTION

Therapy of cleft patients aims to control bone growth and tooth development so as to ensure a secure occlusion with good function. This paper aims to uncover the potential and limits of achieving neutral occlusion in patients with clefts of lip, alveolus and palate. Two treatment approaches are presented and compared with respect to the best long-term results.

PATIENTS AND METHODS

The first method implies occlusal rehabilitation using maximum intermaxillary orthodontic fixation with the Jasper Jumper. Thus, orthodontic dental-alveolar compensation of the anomaly is obtained. The second method represents orthognathic surgery to achieve ideal intermaxillary relations and a neutral occlusion. Two patients are described - one each for both treatment regimens.

DISCUSSION

The methods presented are meant to illustrate possible options for sagittal jaw development/movement in patient management. Orthodontic treatment has to rely on cooperation with maxillofacial surgery to achieve a neutral occlusion. Optimal management is ensured by a combination of both orthodontic and maxillofacial therapy. The orthodontic and surgical techniques for managing unilateral or bilateral clefts are continuously being further developed.

CONCLUSION

Although orthodontic treatment can achieve good neutral occlusion in some patients, there are limitations and surgical measures may become necessary.

Nasolabial symmetry following Tennison-Randall lip repair: a three-dimensional approach in 10-year-old patients with unilateral clefts of lip, alveolus and palate

AIM

To assess the degree of facial symmetry in patients suffering from unilateral cleft lip, alveolus and palate (UCLAP) by determining differences between the cleft and the non-cleft hemifaces from 3D surface data.

PATIENTS AND METHODS

In twenty-two 10-year-old UCLAP patients, who had the lip repaired using the Tennison-Randall technique and did not undergo further revisional surgery, differences were determined between landmarks, surface areas of the upper lip vermilion and nostrils and virtual volumes of midface, nose and upper lip for cleft and non-cleft sides, separately, after having established a plane of symmetry calculated from optical 3D facial surface data.

RESULTS

Statistically significant differences could be found between cleft and non-cleft sides for the nasal landmarks G(lat), G(sup) and La(med), the nostril angle and the virtual volume of the nose (p(Glat)=0.011, p(Gsup)<0.0005, p(Lamed)=0.002, p(nostril angle)=0.036 and p(nose volume)<0.0005, resp.).

CONCLUSION

Analysis of 3D data shows that complete nasal symmetry is difficult to achieve with Tennison-Randall's lip repair without revisional surgery. Further trials on larger populations of patients will allow a more comprehensive and consistent analysis of the consequence of different methods for cp repair in order to identify the techniques with the best outcome in terms of facial symmetry.