Piezoelectric device vs. conventional rotative instruments in impacted third molar surgery: relationships between surgical difficulty and postoperative pain with histological evaluations

The influence of electrical high-speed rotation on mandibular third molar surgeries: a prospective, randomized, split-mouth clinical and radiographic study

The aim of this split-mouth randomized clinical trial was to evaluate the clinical outcomes (operative time, edema, trismus, and pain), the immediate histological effects, the alveolar repair (2 and 4 months), and the quality of life after the extraction of impacted third molars using high-speed pneumatic and electrical rotation. Sixteen patients underwent extraction of the two mandibular third molars with a minimum interval of 15 days. On one side of the participant's mouth, high-speed pneumatic rotation was used (Control Group-CG) while for the other side, high-speed electrical rotation was used (Study Group-SG). Statistical analysis included ANOVA repeated measures and Pearson correlations. SG group showed: shorter operative time (p = 0.019), less pain (p = 0.034), swelling (p < 0.001) and trismus (p = 0.025) on the 1st postoperative day; less pain (p = 0.034) and trismus (p = 0.010) on the 3rd postoperative day; less trismus (p = 0.032) on the 7th postoperative day; and better quality of life (p = 0.007). No differences were observed for peripheral bone damage or bone density of alveolar repair at 2 and 4 months between groups. Electric high-speed rotation provided better postoperative clinical parameters of pain, edema and trismus when compared with pneumatic high-speed rotation for mandibular third molar surgery.Trial registration: Brazilian Registry of Clinical Trials registration number RBR-4xyqhqm ( https://ensaiosclinicos.gov.br/rg/RBR-4xyqhqm ).

Conventional drilling versus ultrasound and laser osteotomy in mandibular third molar surgery: A comparative study

BACKGROUND

There are few research works with in-depth studies and direct simultaneous comparisons of the effects on tissue reactions and patients' recovery following in vivo conventional drilling, ultrasound- and laser-assisted osteotomy in humans.

OBJECTIVE

The current study aims to compare bone cutting duration, pain, swelling, and trismus in patients following surgical mandible third molar extraction by bone removal using three different osteotomes-a conventional rotary device, an ultrasonic unit, and an Er:YAG laser.

METHODS

A prospective, randomized three-group comparative clinical trial was performed. As an experimental setting for the study, аn open mandible third molar surgery was chosen because osteotomy is included in its protocol. Patients were divided into three groups according to the used device for bone removal. Bone cutting time intraoperatively, facial swelling, trismus, and pain on the first, second, and third postoperative days were assessed. The statistical analyses were performed using the SPSS v. 17.0-Kolmogorov-Smirnov test, one-way ANOVA, Student's t-test, Mann-Whitney test, and χ2  test. Statistical results were considered significant at p < 0.05 (confidence interval of difference, 95% CI).

RESULTS

Eighty patients (34 males and 46 females with an average age of 25.18 years) were included in the study. The average time for bone removal by the conventional low-speed device (4.95 min), by the ultrasonic unit (5.13 min), and by the Er:YAG laser (9.00 min) differed significantly (p = 0.001). The mean postoperative facial swelling showed a marked difference between the groups (p < 0.05), in favor of the laser and piezo groups. The osteotome proved to influence pain intensity not only immediately after surgery (p = 0.002), but also during the followed-up period (p = 0.001), again in favor of the two above-mentioned groups. No association was found between trismus and the osteotome used by the followed-up patients (p > 0.05).

CONCLUSION

Bone-cutting mechanism and the biological influence of the laser beam and ultrasound on living tissues proved to be favorable factors for patients' pain levels and tissue swelling postoperatively independent of the longer osteotomy duration compared to conventional drilling.

[Effectiveness of piezoelectric versus straight hand piece at low speed within the surgical extraction of retained lower third molars]

Objective

Determine the effectiveness of the piezoelectric handpiece vs. the straight handpiece at low speed in surgeries of impacted lower third molars, in relation to post-surgical effects (edema, pain and trismus) and the operative time of the osteotomy, in patients attending the Maxillofacial Surgery Service of the "Hospital de Especialidades Fuerzas Armadas N°1".

Method

It is an observational, analytical, longitudinal prospective cohort clinical study. A sample of 40 patients of both sexes aged between 18 and 25 years was taken, divided into two groups of 20 patients each, in group A extractions were performed with piezoelectric and in group B with straight rotary handpiece at low velocity. The results were analyzed on the third, fifth and eighth day, the edema was measured with the method of Amin and Laskin, for the pain the Visual Analogous Scale (VAS) was used, and for the presence of trismus with the instrument foot of king.

Results

In group A, edema (11.72 mm), pain (4.67) and mouth opening (39.49 mm) were lower than in group B edema (12.29 mm), pain (4.8) and mouth opening (35.83 mm) and osteotomy time was significantly longer with piezoelectric (6.54 ± 3.05 min) compared to the straight handpiece (1.55 ± 0.57 mm). min) and there was a difference in edema, pain and trismus under normal conditions in contrast to what was obtained at 3, 5, 8 days between the two instruments.

Conclusion

the post-surgical effects of edema, pain and trismus of the extraction of retained lower third molars are less intense with the piezoelectric compared to the straight handpiece, the use of the piezoelectric being recommended.

Comparative and clinical evaluation between piezoelectric and conventional rotary techniques for mandibular impacted third molar extraction

Purpose

The aim of this study was to evaluate and compare the operative and postoperative outcomes of the mandibular impacted third molar removal using piezoelectric technique and conventional rotary bur technique.

Settings

The study was conducted in the department of oral and maxillofacial surgery between January 1, 2019, and January 1, 2020.

Materials and Methods

Thirty patients, with an age of 18-40 years, with asymptomatic bilateral impacted mandibular third molars, were selected for the study and randomly surgical extraction was done either using piezoelectric or the conventional rotary bur technique on each site. The intraoperative time taken, postoperative pain, swelling, and trismus were assessed over a follow-up period of 7 days postoperatively.

Results

Study and control groups were compared using paired t-test. There was statistical significance in reduction of pain and swelling in the study group where the duration of surgery was increased in the study group.

Conclusion

Even if piezoelectric technique takes more time but can be used safely as another technique to conventional surgical method with surgical bur and handpiece for removal of impacted mandibular third molars.

Three-dimensional facial swelling evaluation of piezo-electric vs conventional drilling bur surgery of impacted lower third molar: a randomized clinical trial

BACKGROUND

Among the post-surgical complications of lower wisdom teeth surgery, swelling is considered by patients one of the most impairing, with both social and biological influences and impacting patients' quality of life. Aim of the study was to evaluate the swelling following the osteotomy when performed with drilling burs versus piezo-electric instruments in the mandibular impacted third molar extraction, using a facial reconstruction software.

MATERIALS AND METHODS

A randomized, split-mouth, single-blind study was conducted on patients, ranging between 18 and 40 years of age, requiring lower third molars extraction and referred at the Oral Surgery Unit of the School of Dentistry of the University of Messina. Twenty-two patients were recruited during an 8 months period according to the following criteria: good general health conditions; bilateral, symmetrical, impacted third molars; no use of medication that would influence or alter wound healing; no temporomandibular joint disorder history; no smoking. All patients underwent bilateral surgical removal. For each patient, a facial scan was obtained prior to the surgical procedures. The two extractions were conducted performing, in a randomized way, osteotomy with rotatory burs or use of piezo surgical instruments. Facial scans were repeated at 3 and 7 days after the surgical procedures. Volumetric differences were calculated via superimposition using a dedicated software. The data obtained were processed using paired t-test.

RESULTS

The results obtained from our study showed no significant differences between two groups regarding post-operative swelling. To the best of our knowledge, this study represents the first experience of using an objective method that can be reproducible on the collection of patients' clinical parameters.

CONCLUSIONS

The 3D digital analysis, in the evaluation of facial swelling, is a technique of simple application, objective, reproducible, reliable, decreasing the variables of error. Based on these data, it is possible to conclude that piezo surgery is a safe way for performing the osteotomies during third molar surgery. However, regarding the post-operative swelling, it does not show an advantage over classical rotary instruments.

TRIAL REGISTRATION

Registered on ClinicalTrials.gov (ID: NCT05488028, on 04/08/2022). Approved by Ethical Committee of Messina: (ID 01-2020, on 27/04/2020).

Bilateral Inverted and Impacted Mandibular Third Molars: A Rare Case Report

Even while certain forms of mandibular impactions (such as inverted molars) might be considered unusual findings, mandibular impacted teeth are really one of the most regularly seen dental abnormalities. Two female patients' mandibular third molars were discovered to be inverted during a regular inspection, and two such examples are reported here in this article. Both patients underwent routine radiographic examination. Cone beam computed tomography and orthopantomogram were requested to evaluate the state of the bone and to check for any abnormalities, and inverted impacted teeth were discovered. A tooth is said to be inversed when it is placed reversed and seated upside down. Ascending ramus is the most common site for third molars in the mandible. It is also possible for a maxillary tooth to get impacted and for the tooth to be pushed all the way to the orbit's floor, though mandibular impacted teeth are more common. Only a few cases of inverted and impacted mandibular third molars have been reported in the literature. No definitive treatment protocols exist for the removal of inverted teeth. The safest protocol is conservative treatment in which the teeth are not extracted until they produce pathological signs.

Conventional Rotary Technique and Piezosurgical Technique in the Removal of Impacted Mandibular Third Molar: A Comparative Study

AIM

To compare the operating time, postoperative pain, edema, trismus, and patient acceptance following surgical removal of impacted third molar using piezosurgery and conventional rotary technique.

MATERIALS AND METHODS

About 42 patients with impacted mesioangular mandibular third molars were included in this study. Subjects are divided into two groups: group I (treated with conventional rotary technique) and group II (treated with piezosurgery). Duration of surgery, pain, trismus, and swelling were assessed. The patients were evaluated on the 1st, 3rd, and 7th postoperative days.

RESULTS

Postoperative pain, trismus, and edema were reduced with piezosurgery compared with conventional technique. Even though the duration of time was longer with piezosurgery, patient comfort was found to be better.

CONCLUSION

Piezosurgery is a meticulous and innovative ultrasonic technique with selective bone cutting and better postoperative outcomes. However, it is expensive, and the operating time is prolonged.

CLINICAL SIGNIFICANCE

Piezosurgery is an alternative in the surgical removal of third molars as it ensures precise and selective cutting, with no injury to the surrounding soft tissues. Postoperative outcome and patient acceptance are improved with piezosurgery.

Quantification and comparison of the regional acceleratory phenomenon in bone following piezosurgery or bur osteotomy: A pilot study in rats

BACKGROUND/OBJECTIVE

The Regional Acceleratory Phenomenon (RAP) can be induced surgically via decortication (selective cortical penetrations) of bone to accelerate orthodontic tooth movement. Few studies have compared the impact and efficiency of different decortication methods to induce the RAP. The aim of this study was to determine if there is a significant difference in the intensity of the RAP induced by a surgical defect created either using a piezoelectric knife or a rotary bur.

METHODS

Twenty-two Sprague-Dawley rats were divided into two treatment groups (each n = 8) and a control group (n = 6). The treatment groups were subjected to transcortical penetrations (TP) of the right tibia using either a piezoelectric knife (PTP) or a rotary bur (BTP). The right tibias of the control group animals had reflection of tissues (SHAM) and the left legs were kept for comparison (INTACT). The animals were killed at 7 and 14 days after the operation in an equally distributed manner. Microcomputed tomography images were obtained and analyzed utilizing artificial intelligence for bone cortical porosity (Ct.Po) locally and regionally.

RESULTS/CONCLUSION

Regionally, TP using a PTP induced significantly (p < .05, Kruskal-Wallis test) more Ct.Po than BTP or INTACT for both the 7- and 14-day time points. PTP was not found to induce significantly more Ct.Po than SHAM at any time point. However, PTP induced significantly more Ct.Po than the INTACT group for each time point, while SHAM did not. The local analysis did not reveal any relevant significant differences between groups.

Piezoelectric Surgery Is Effective in Reducing Pain, Swelling, and Trismus After Removal of Impacted Lower Third Molars: A Meta-Analysis

PURPOSE

Surgery of impacted lower third molars may be associated with postoperative complications. The aim of this study is to determine whether piezoelectric surgery is effective in reducing pain, swelling, and trismus compared to conventional rotary instruments during extraction of impacted lower third molars.

METHODS

For this systematic review, the searches were performed independently by 2 researchers. Randomized clinical trials that used the piezoelectric instrument for the removal of impacted lower third molars in humans were included. The predictor variable was the study group (piezo surgery vs rotary instruments). The main outcome was the analysis of postoperative pain, swelling, and trismus. Data analysis included risk of bias assessment (RoB 2 Cochrane) and meta-analysis with heterogeneity based on random effects I² and 95% confidence interval.

RESULTS

In the initial results, 956 articles were revised and after applying inclusion/exclusion criteria, the final sample was composed of 18 publications, all being randomized clinical trials. The results of this meta-analysis demonstrated a significant reduction in pain scores with a Cohen's d of -0.95 [CI 95% = -1.23 to -0.67] of high clinical impact (P < .001). In the piezo group there was a significant increase in mouth opening of 4.29 [CI 95% = 2.33 to 6.25] mm (P < .001). Regarding swelling, Tragus-Ang and Go-eye, both showed a significant reduction in the piezo group (P < .001). There was a significant increase of 7.32 [CI 95% = 4.40 to 10.24] minutes in the piezo group (P < .00001), and none of the studies showed a significant risk of bias.

CONCLUSIONS

Piezo proved to be effective in reducing pain, swelling, and trismus in third molar surgeries even with longer surgical time, but due to the lack of standardization in primary studies regarding swelling, new, controlled and standardized studies should be carried out with the objective of proving the effectiveness of this therapeutic modality in the reduction of postoperative swelling.

A Pilot Randomized Controlled Clinical Trial Comparing Piezo Versus Conventional Rotary Surgery for Removal of Impacted Mandibular Third Molars

Background: The extraction of impacted mandibular third molars is a frequent dental surgery, interfering with patients’ quality of life. Ultrasonic surgery is an alternative to osteotomy with conventional rotary instruments. This study compares postoperative signals and symptoms after extracting impacted mandibular third molars using ultrasonic surgery or conventional rotary osteotomy. Methods: A pilot randomized controlled clinical trial was conducted. Thirty patients were randomly divided into the test group (ultrasonic technique) and a control group (conventional rotatory technique). All surgeries were timed. Swelling parameters, trismus and paraesthesia were evaluated on the day of surgery and the third, fifth and seventh postoperative days. Intraoperative bleeding was evaluated during surgery. Postoperative pain was evaluated daily by the patient through a visual analogue scale and the number of ingested analgesics. Results: Pain, swelling and trismus present beneficial results with the ultrasonic technique but without statistical significance. Intraoperative bleeding was significantly lower with ultrasonic surgery (t(28) = 3.258; p = 0.003). Operating time was significantly higher in extractions involving osteotomy and cutting crown and roots either with the conventional technique (p = 0.020) or ultrasonic technique (p = 0.039). Regardless of the surgical difficulty, no statistically significant results were detected between techniques regarding the procedure duration. Conclusions: The beneficial postoperative signs and symptoms make ultrasonic surgery a favourable therapeutic option, especially when the integrity of noble anatomical structures is the most important risk factor. Further studies with larger samples are needed to support the use of piezosurgery as a valid option for impacted mandibular third molar extraction.

Incidence of Delayed Infections after Lower Third Molar Extraction

PURPOSE

This retrospective study aimed to verify that the onset of delayed infection after lower third molar extraction was influenced by the amount of distal space.

PATIENTS AND METHODS

We evaluated 265 patients (age range 12-55 years), who had one or two mandibular third molars to be extracted. All 380 third molars were removed for orthodontic reasons, periodontal disease, or pericoronitis and were evaluated by the Pell and Gregory classification using the panoramic radiographs.

RESULTS

Delayed infection, characterized from purulent exudates from the alveolus and swelling, was reported in 21 extractions between 2 and 8 weeks after surgery. In 16 of the 21 cases of infection, a class III of Pell and Gregory was observed, and this anatomic condition evidenced an extremely reduced space distal to the second molar.

CONCLUSION

This study confirmed that the absence of distal space was significantly correlated with delayed infection. These data are important for proper examination of a patient because, in the case of class I or II of Pell and Gregory, a delayed infection was less likely to occur, while a class III of Pell and Gregory could indicate a greater likelihood of this type of infection.

The use of advanced platelet-rich fibrin after surgical removal of mandibular third molars: a systematic review and meta-analysis

The objective of this systematic review was to test the hypothesis of no difference in recovery following surgical removal of mandibular third molars with the application of advanced platelet-rich fibrin (A-PRF) in the extraction socket compared with alternative biomaterials or natural wound healing. A search of MEDLINE (PubMed), Embase, Cochrane Library, and Scopus was conducted. Human randomized controlled trials published in English up until December 31, 2020 were included. Outcome measures were pain, facial swelling, trismus, soft tissue healing, alveolar osteitis, and quality of life; these were evaluated by descriptive statistics and meta-analysis including 95% confidence intervals (CI). Four studies with a low or moderate risk of bias fulfilled the inclusion criteria. A-PRF resulted in significantly lower pain scores when compared with leucocyte platelet-rich fibrin or natural wound healing after 2 days (-16.8, 95% CI -18.9 to -14.7), 3 days (-12.1, 95% CI -13.4 to -10.7), and 7 days (-1.9, 95% CI -2.9 to -0.9). A-PRF seems to have a negligible effect on facial swelling and trismus and some beneficial effect on soft tissue healing. Alveolar osteitis and quality of life were not assessed. The included studies were characterized by considerable heterogeneity and confounding variables. Thus, the level of evidence appears to be inadequate for clinical recommendations according to the focused question.

Piezosurgery versus Conventional Cutting Techniques in Craniofacial Surgery: A Systematic Review and Meta-Analysis

BACKGROUND

Despite its increasing use in craniofacial surgery, the evidence for piezosurgery over conventional bone-cutting techniques has not been critically appraised. The purpose of this systematic review and meta-analysis was to identify and assess the evidence that exists for the use of piezosurgery in craniofacial surgery.

METHODS

A systematic review was undertaken using a computerized search. Publication descriptors, methodologic details, and outcomes were extracted. Articles were assessed using the methodologic index for nonrandomized studies and Cochrane instruments. Random effects meta-analysis was completed.

RESULTS

Thirty-nine studies were included. Most studies were published within the past 5 years (51.3 percent) and were randomized controlled trials (56.4 percent). The mean age of patients was 27 years (range, 0.2 to 57 years), and the mean sample size was 44 (range, 12 to 180). Meta-analysis revealed that compared to conventional instruments, piezosurgery had a lower postoperative incidence of sensory disturbance, principally in mandibular procedures (OR, 0.29; 95 percent CI, 0.11 to 0.77; p = 0.01) and pain at postoperative day 3 (mean difference, -0.86; 95 percent CI, -1.20 to -0.53; p < 0.01). There was no statistically significant difference in operating room time (mean difference, 8.60; 95 percent CI, -1.27 to 18.47; p = 0.80) or osteotomy time (mean difference, 0.35; 95 percent CI, -2.99 to 3.68; p = 0.84). Most studies were clinically homogenous (92 percent) and of high quality based on the methodologic index for nonrandomized studies instrument (84 percent). Few studies had domains at high risk of bias based on the Cochrane instrument (28.6 percent).

CONCLUSIONS

Piezosurgery has considerable benefits when compared to conventional instruments. Future studies should investigate its cost-effectiveness and benefits in terms of blood loss, edema/ecchymosis, and patient satisfaction.

Review of dexamethasone administration for management of complications in postoperative third molar surgery

Dexamethasone has been used in oral and maxillofacial surgery for postoperative pain, swelling, and trismus following third molar surgeries. It is a potent and powerful drug that can alleviate the aforementioned postoperative sequelae. Dexamethasone is responsible for inhibiting the release of inflammatory mediators in the inflammation process to improve patient quality of life after surgical intervention. There are several available routes of administering dexamethasone. This article will help determine the suggested routes of administration, dosage, parameters, and dexamethasone timing for third molar surgeries.

Effect of Intraoral Drainage after Impacted Mandibular Third Molar Extraction on Non-Infectious Postoperative Complications

Surgical removal of mandibular third molars is associated with non-infectious postoperative complications, including pain, swelling, trismus. Intraoral drains are noteworthy because of their ease of application, availability, and effectiveness. This study aimed to evaluate the use of latex and calcium–sodium alginate mouth flat drains on the severity of postoperative complications such as pain, trismus, and edema after surgical removal of mandibular third molars. Ninety patients who underwent surgical removal of wisdom teeth were studied. The patients were divided into three groups. Group A—with a latex flat drain, group B—with a sodium–calcium alginate (Kaltostat) flat drain, and group C—with a wound closed with knotted sutures. Patients were assessed for pain on a VAS scale every day from surgery to postoperative day 7. Before the procedure and on postoperative days 1, 2, and 7, the pain level, edema, and trismus were measured, respectively. Intraoral drainage with a flat drain after mandibular third molar removal does not significantly reduce pain, as measured by the VAS scale, or postoperative swelling, as measured by lines between craniometric points. Intraoral drainage with a latex drain after mandibular third molar removal does not significantly reduce trismus, while intraoral drainage with a calcium–sodium alginate drainage bag significantly increases trismus.

Piezo-surgery technique and intramuscular dexamethasone injection to reduce postoperative pain after impacted mandibular third molar surgery: a randomized clinical trial

Background

Surgical extraction of the impacted mandibular third molar is commonly associated with postoperative pain, swelling, and trismus. Usually, rotatory instruments like burs have been used for osteotomy, while Piezosurgery is an innovative technique introduced to overcome the weaknesses related to the conventional technique. In addition, Dexamethasone administration before the extraction of impacted third molars is an efficient way to reduce postoperative pain due to robust anti-inflammatory activity. The purpose of the study is to evaluate the effect of piezo-surgery and dexamethasone injection on postoperative sequelae after the surgical extraction of impacted mandibular third molars, and ultimately to compare their effect on reducing postoperative pain.

Methods

A randomized controlled clinical trial was conducted with a sample of 80 patients. Participants were divided into four groups: Group 1 (Conventional rotatory), Group 2 (Conventional rotatory with 8 mg dose of dexamethasone 30 min before surgery), Group 3 (Piezo-surgery), and Group 4 (Piezo-surgery with 8 mg dose of dexamethasone 30 min before surgery). The outcome variables were surgical working time calculated in minutes, maximal mouth opening measured in millimeters using Vernier Caliper at baseline and day 3 and postoperative pain assessed using a Visual Analog Scale (VAS) on days 1, 3, and 7.

Results

The surgical working time was longer in piezo-surgery groups compared with the conventional rotatory instruments groups (15.82 ± 3.47 vs 23.33 ± 2.54; p value < 0.0001). The lowest reduction in mouth opening between baseline and 3rd-day post-op was found in the Piezo-surgery with Dexamethasone group (mean difference = 5.0, SD = 3.9, p value < 0.0001) followed by the Piezosurgery without Dexamethasone group (mean difference = 5.8, SD = 4.5, p value < 0.0001) and the highest average was reported by the Conventional rotatory without Dexamethasone (mean difference = 9.7, SD = 4.5, p value < 0.0001. In the four groups, the mean pain score was highest on the 1st day and gradually decreased over the following days. Comparison of the 1st and 3rd postoperative pain between groups revealed a lowest mean pain score in the Piezo-surgery with Dexamethasone group, followed by Conventional rotatory with Dexamethasone group and a highest mean score in the Conventional rotatory without Dexamethasone group (p value < 0.0001).

Conclusion

The association of Piezosurgery osteotomy and Dexamethasone intramuscular injection could be an effective combination to reduce postoperative pain and trismus after impacted third molar surgery.

Trial registration: NCT04889781 (https://clinicaltrials.gov/), Date of Registration: 17/05/2021 (retrospectively registered), https://clinicaltrials.gov/ct2/show/NCT04889781?term=NCT04889781&draw=2&rank=1

Oral cancer awareness in North-Western Spain: a population-based study

Background

An early diagnosis depends greatly on patient awareness. Thus, the aim of this study was to investigate general awareness of oral cancer and knowledge about its risk factors, signs and symptoms.

Material and Methods

Cross-sectional population-based survey of randomly selected respondents conducted from March 1, 2015 to 30 June 2016.

Results

A total of 5,727 people entered the survey (response rate: 53%). When asked what cancers participants had heard about, 20.3% mentioned oral cancer. Regarding risk factors, tobacco was mentioned by 55.3% of the sample (n=3,169), followed by alcohol (12.5%; n=708), poor oral hygiene (10.8%; n=618), diet (6.5%; n=377), and genetics (4.5%; n=248).

Conclusions

General population has low awareness of oral cancer with poor knowledge of risk factors and main alarm signs. In addition, individuals in the risk group scored lower values in the main variables analysed; even those highly educated showed insufficient awareness and knowledge of oral cancer. In these circumstances, there is clear need for educational interventions tailored to the target audience and aimed at increasing knowledge and awareness of oral cancer to promote primary prevention of oral cancer and minimising the time interval of patients with symptomatic oral cancer in their path to treatment.

Key words:Oral cancer, awareness, risk factors, surveys and questionnaires, Spain.

Bone Micromorphology and Material Attrition After Sonic, Ultrasonic and Conventional Osteotomies

BACKGROUND/AIM

Osteotomy as the first step in surgery, provides access to the field and its application could influence the outcome. Nowadays, the conventional burr reduction is being challenged by newer sonic and ultrasonic methods. We investigated the bone structural integrity and metal attrition residues both in bone and the irrigation fluid.

MATERIALS AND METHODS

Bovine ribs were cut using three methods. Bone cuts were studied using Environmental Scanning Electron Microscopy (ESEM) for tissue discrepancies and Scanning Electron Microscopy/Energy Dispersion X-Ray Microanalysis (SEM/EDX) for organic and inorganic debris.

RESULTS

Better preservation of bone architecture was seen in piezo and sono surgery while metal attrition was not conclusive (p>0.05). Unlike in bone analyses, both bur and ultrasonic osteotomies showed statistically significant higher median inorganic detection per analysis (p=0.021 and p=0.037, respectively).

CONCLUSION

Sono and piezo surgery proved to be less invasive while attrition properties were the same.

Use of an Ultrasonic Aspirator in Removal of an Orbital Rim Hemangioma

Intraosseous hemangiomas are rare bony neoplasms that infrequently develop in the calvarium or facial bones. Due to their highly vascular nature, biopsy or resection of these tumors can present a surgical challenge, with reports of significant blood loss during tumor resection. Traditional surgical resection of intraosseous hemangiomas often includes the use of high speed oscillating or sagittal saws. Ultrasonic aspirators, which spare adjacent soft-tissue structures and minimize blood loss, have been successfully used in resection of firm soft tissue masses of the orbit; however, this technology has not been demonstrated in the treatment of a vascular tumor in the orbit. The authors present the case of a 37-year-old woman who presented with an intraosseous hemangioma at the left inferior orbital rim and maxilla; the mass was successfully resected with the aid of a Sonopet Ultrasonic Aspirator bone knife. The knife allowed for simultaneous emulsification and cautery of the bone encasing the mass with low risk to sensitive surrounding tissue.

Comparison of postoperative morbidity between piezoelectric surgery and conventional rotary instruments in mandibular third molar surgery: a split-mouth clinical study

Background

The extraction of impacted third molar teeth is a common procedure in maxillofacial surgery. The aim of this study was to compare of piezoelectric surgical technique with the one with conventional rotary instruments in terms of edema, trismus and pain, in mandibular third molar surgery.

Material and Methods

20 individuals with symmetrically impacted lower mandibular third molars and 40 teeth were included in the study. Third molars on the left side of each patient were removed with piezosurgery, while the counterparts on the right side were removed with conventional rotary instruments. Postoperatively, the same antibiotic, analgesic, and mouthwash were recommended to both groups. Ultrasound, edema, trismus measurements were performed before surgery, postoperative, postoperative day 2 and postoperative day 7. VAS scale was used to evaluate the pain.

Results

The average age of 20 individuals included in the study was found to be 21.85 ± 3.08 years. The operation time of the individuals who underwent the surgery with conventional rotary instruments was found to be 12 minutes 31.70 ± 167.03 seconds, and the operation time in the Piezosurgery group was 19 minutes 10.60 ± 306.59 seconds. There was no significant difference between the two groups in terms of trismus, edema, and pain.

Conclusions

Piezosurgery is a safe method that can be used in molar removal, but in this split-mouth study, it is not found advantageous in terms of postoperative morbidity due to the longer working time compared to the one performed with conventional rotary instruments.

Key words:Edema, impacted third molar, pain, piezosurgery, trismus.

Influence of Surgical Flap Design (Envelope and Szmyd) for Removal of Impacted Mandibular Third Molars on Clinical Periodontal Parameters: A Clinical Trial

The aim of the study was to assess the influence of flap designs (Envelope flap (EF) and Szmyd flap (SF)) for impacted mandibular third molar extraction, on periodontal pocket depth (PPD), clinical attachment loss (CAL) and bone levels (BL) of second molar. Sixty patients indicated for third molar extractions with healthy second molars were allocated into two groups: EF and SF (n = 30). Third molars were assessed for angulation, root patterns, depth of impactions and relation with ramus (Pell and Gregory classification). Extraction of third molars was performed and PPD, CAL and BL around second molars at 0, 3 and 6 month (mon) follow-ups (FU) were assessed clinically and radiographically. ANOVA, Chi-square and Fisher’s exact test were employed to compare periodontal factors between EF and SF groups, considering p ≤ 0.05 as significant. Sixty participants with a mean age of 23.22 ± 3.17 were included in the study. Based on angulation, the most common impaction in the EF and SF groups was mesio-angular (EF, 50%; SF, 36.7%). Buccal and distal PPD showed a significant increase (p < 0.001) in both EF and SF patients from baseline to 6 mon. EF patients showed significantly higher distal and buccal CAL (6.67 ± 0.18 mm; 6.91 ± 0.17 mm) and BL (7.64 ± 0.16 mm; 7.90 ± 0.15 mm) as compared to SF patients (CAL, 6.76 ± 0.26 mm; 6.91 ± 0.17 mm-BL, 7.42 ± 0.38 mm; 7.34 ± 0.34 mm) at 6 mon FU. SF showed better soft tissue attachment (PPD and CAL) and bone stability (less bone loss) around second molars compared to EF after third molar extractions regardless of the patient, tooth and operator factors.

Successful management of spontaneous bone regeneration after jaws cystectomy using PRGF approach; case series

In the jaws, the healing process of bone defects occurs differently compared with other anatomical sites where healing is done by the formation of scar tissue. This is due to physiological bone remodeling and continuous bone resorption and apposition. In the case of large cysts, there is an increased risk of postoperative infection due to the retraction of the blood clot on the bony walls. The use of plasma rich in growth factors (PRGF), with or without autologous bone addition, for filling the cystic cavities is beneficial not only for its antimicrobial effect, but also due to simultaneously release of growth factors from platelet alpha granules and adhesive proteins. The aim of our work was to emphasize the spontaneous bone healing of the maxilla and mandible after the enucleation of large and medium-sized cysts in asymptomatic patients of different age. The outcome of three patients who underwent surgery for removal of radicular cysts is presented. Imagistic [cone-beam computed tomography (CBCT)] and histological examination was performed aiming to evaluate the quality of new bone at the site of the bone defect, after different time intervals. By using PRGF approach, the healing of mandibular bone occurred 18 months after cystectomy in a smoker patient, 54-year-old, while the healing of maxillary bone using autologous bone mixed with PRGF occurred after six months in a 63-year-old patient. In a young patient (14 years old), the regeneration period was six months, using PRGF and a fibrin cloth for filling the defect.

A comparison of piezo surgery osteotomies with conventional internal osteotomies as performed by trainee surgeons: a cadaveric study

INTRODUCTION

Aesthetic rhinoplasty remains a challenging procedure with high expectations and narrow tolerance for errors. Considerable training is required to achieve controlled and reliable results. Use of the Piezotome is gaining popularity for performing the nasal osteotomies, a key step in rhinoplasty, where it is reported to improve precision and predictability and to keep tissue damage to a minimum. We compare the outcomes of conventional osteotomy techniques to piezosurgery in human cadavers as undertaken by surgical trainees.

MATERIALS AND METHODS

Seven human cadavers were used and a total of 14 osteotomies were performed. Conventional osteotomies and piezosurgery were carried out each on one side of the cadaver. A number of fragments and a blinded assessment of the accuracy of the osteotomy compared with the preprocedure skin markings were carried out by two experienced rhinoplasty surgeons. The Mann-Whitney test for statistical analysis was used.

RESULTS

The mean number of fragments was 1.57 in the piezosurgery osteotomy and 2.14 using conventional osteotomies. Four of seven piezosurgery osteotomies achieved an accuracy within 1mm. The conventional osteotomies as performed by the trainees showed a significant mismatch of more than 3mm in three of seven of cases. Accuracy within 1mm was achieved in one of seven cases.

DISCUSSION

Piezosurgery offers a safe, reliable and precise method of performing lateral nasal osteotomies. This human cadaver study shows a high accuracy of osteotomy and fewer comminuted fractures using this technique compared with conventional osteotomy techniques.

Postoperative evaluation of Er:YAG laser, piezosurgery, and rotary systems used for osteotomy in mandibular third-molar extractions

OBJECTIVE

This study compared patient postoperative pain, swelling, and trismus after usage of rotary instruments, piezosurgery, and Er:YAG lasers in mandibular third-molar extraction.

MATERIALS AND METHODS

This prospective study was executed with class II and position B vertically impacted mandibular third molars. Patients were divided into three groups according to the osteotomy system used to remove retentive bone: rotary instruments, piezosurgery, and Er:YAG laser. Postoperative pain was evaluated using VAS questionnaires at 12 h, 24 h, 48 h, and 7 days after procedures. Trismus was evaluated by measuring the distance between the maxillary and mandibular incisors at maximum mouth opening, and comparing preoperative measurements with those for postoperative days 2 and 7. Analyses of swelling were carried out via a stereophotogrammetry system. Operation times were measured using a digital stopwatch from the initial incision to the final suture.

RESULTS

There were no statistically significant differences between the groups in terms of pain, trismus, or swelling (p > 0.05). Pain persisted more in the rotary instrument group 24 h later (0 ± 1.3; p = 0.001). The pain scores obtained after 48 h for the piezosurgery (1.81 ± 2.29) and rotary (2.2 ± 2.12) groups were observed at 24 h in the laser group (2.19 ± 1.52). The mean operation time was highest using the laser (19.1 ± 3.85 min; p = 0.001) and lowest using rotary instruments (9.88 ± 2.97 min; p = 0.001).

CONCLUSION

Piezosurgery and Er:YAG laser are good alternatives to rotary instrument systems in third-molar extraction, but both systems are slower than traditional rotary instruments.

Comparison of piezosurgery and conventional rotatory technique in transalveolar extraction of mandibular third molars: A pilot study

Objectives

To compare the postoperative outcomes in impacted mandibular third molar extraction using piezosurgery and conventional rotary technique; and to assess the stress levels in both the techniques by measuring salivary cortisol levels.

Methods

Ten patients with symmetrical impacted lower third molars were included in this split mouth pilot study. Measurements for mouth opening and swelling were taken preoperatively on the day of surgery and 1 week after surgery. Pain was evaluated using Visual Analog Scale (VAS) from first postoperative day for six consecutive days. Saliva collection for analysis of cortisol levels was done at four time intervals - before starting the procedure, immediately after the procedure, 20 min and 1 week later. The mean in two groups was compared using paired t-test/Wilcoxon signed rank test as applicable. Friedman test was used to compare multiple readings of pain and salivary cortisol.

Results

Reduction in mouth opening was more in rotary group than piezosurgery group but was not statistically significant (p = 0.092). Increase in facial swelling was more in the rotary group than piezosurgery group with statistically significant values (p = 0.020). Rotary group had higher values for postoperative pain as compared to piezosurgery on all the days and the difference was statistically significant on each day except second postoperative day. Salivary cortisol levels were elevated in both the groups with the mean values higher in group I (rotary) than in group II (Piezosurgery).

Conclusion

Extraction of impacted lower third molar results in more favourable outcome when carried out by piezosurgery technique. Further studies are needed to compare the salivary cortisol response in rotary and piezosurgery techniques.

Surgical techniques for the removal of mandibular wisdom teeth

BACKGROUND

Pathology relating to mandibular wisdom teeth is a frequent presentation to oral and maxillofacial surgeons, and surgical removal of mandibular wisdom teeth is a common operation. The indications for surgical removal of these teeth are alleviation of local pain, swelling and trismus, and also the prevention of spread of infection that may occasionally threaten life. Surgery is commonly associated with short-term postoperative pain, swelling and trismus. Less frequently, infection, dry socket (alveolar osteitis) and trigeminal nerve injuries may occur. This review focuses on the optimal methods in order to improve patient experience and minimise postoperative morbidity.

OBJECTIVES

To compare the relative benefits and risks of different techniques for surgical removal of mandibular wisdom teeth.

SEARCH METHODS

Cochrane Oral Health's Information Specialist searched the following databases: Cochrane Oral Health Trials Register (to 8 July 2019), the Cochrane Central Register of Controlled Trials (CENTRAL) (the Cochrane Library; 2019, Issue 6), MEDLINE Ovid (1946 to 8 July 2019), and Embase Ovid (1980 to 8 July 2019). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. We placed no restrictions on the language or date of publication.

SELECTION CRITERIA

Randomised controlled trials comparing different surgical techniques for the removal of mandibular wisdom teeth.

DATA COLLECTION AND ANALYSIS

Three review authors were involved in assessing the relevance of identified studies, evaluated the risk of bias in included studies and extracted data. We used risk ratios (RRs) for dichotomous data in parallel-group trials (or Peto odds ratios if the event rate was low), odds ratios (ORs) for dichotomous data in cross-over or split-mouth studies, and mean differences (MDs) for continuous data. We took into account the pairing of the split-mouth studies in our analyses, and combined parallel-group and split-mouth studies using the generic inverse-variance method. We used the fixed-effect model for three studies or fewer, and random-effects model for more than three studies.

MAIN RESULTS

We included 62 trials with 4643 participants. Several of the trials excluded individuals who were not in excellent health. We assessed 33 of the studies (53%) as being at high risk of bias and 29 as unclear. We report results for our primary outcomes below. Comparisons of different suturing techniques and of drain versus no drain did not report any of our primary outcomes. No studies provided useable data for any of our primary outcomes in relation to coronectomy. There is insufficient evidence to determine whether envelope or triangular flap designs led to more alveolar osteitis (OR 0.33, 95% confidence interval (CI) 0.09 to 1.23; 5 studies; low-certainty evidence), wound infection (OR 0.29, 95% CI 0.04 to 2.06; 2 studies; low-certainty evidence), or permanent altered tongue sensation (Peto OR 4.48, 95% CI 0.07 to 286.49; 1 study; very low-certainty evidence). In terms of other adverse effects, two studies reported wound dehiscence at up to 30 days after surgery, but found no difference in risk between interventions. There is insufficient evidence to determine whether the use of a lingual retractor affected the risk of permanent altered sensation compared to not using one (Peto OR 0.14, 95% CI 0.00 to 6.82; 1 study; very low-certainty evidence). None of our other primary outcomes were reported by studies included in this comparison. There is insufficient evidence to determine whether lingual split with chisel is better than a surgical hand-piece for bone removal in terms of wound infection (OR 1.00, 95% CI 0.31 to 3.21; 1 study; very low-certainty evidence). Alveolar osteitis, permanent altered sensation, and other adverse effects were not reported. There is insufficient evidence to determine whether there is any difference in alveolar osteitis according to irrigation method (mechanical versus manual: RR 0.33, 95% CI 0.01 to 8.09; 1 study) or irrigation volume (high versus low; RR 0.52, 95% CI 0.27 to 1.02; 1 study), or whether there is any difference in postoperative infection according to irrigation method (mechanical versus manual: RR 0.50, 95% CI 0.05 to 5.43; 1 study) or irrigation volume (low versus high; RR 0.17, 95% CI 0.02 to 1.37; 1 study) (all very low-certainty evidence). These studies did not report permanent altered sensation and adverse effects. There is insufficient evidence to determine whether primary or secondary wound closure led to more alveolar osteitis (RR 0.99, 95% CI 0.41 to 2.40; 3 studies; low-certainty evidence), wound infection (RR 4.77, 95% CI 0.24 to 96.34; 1 study; very low-certainty evidence), or adverse effects (bleeding) (RR 0.41, 95% CI 0.11 to 1.47; 1 study; very low-certainty evidence). These studies did not report permanent sensation changes. Placing platelet rich plasma (PRP) or platelet rich fibrin (PRF) in sockets may reduce the incidence of alveolar osteitis (OR 0.39, 95% CI 0.22 to 0.67; 2 studies), but the evidence is of low certainty. Our other primary outcomes were not reported.

AUTHORS' CONCLUSIONS

In this 2020 update, we added 27 new studies to the original 35 in the 2014 review. Unfortunately, even with the addition of these studies, we have been unable to draw many meaningful conclusions. The small number of trials evaluating each comparison and reporting our primary outcomes, along with methodological biases in the included trials, means that the body of evidence for each of the nine comparisons evaluated is of low or very low certainty. Participant populations in the trials may not be representative of the general population, or even the population undergoing third molar surgery. Many trials excluded individuals who were not in good health, and several excluded those with active infection or who had deep impactions of their third molars. Consequently, we are unable to make firm recommendations to surgeons to inform their techniques for removal of mandibular third molars. The evidence is uncertain, though we note that there is some limited evidence that placing PRP or PRF in sockets may reduce the incidence of dry socket. The evidence provided in this review may be used as a guide for surgeons when selecting and refining their surgical techniques. Ongoing studies may allow us to provide more definitive conclusions in the future.

Influence of surgical ultrasound used in the detachment of flaps, osteotomy and odontosection in lower third molar surgeries. A prospective, randomized, and "split-mouth" clinical study

Background

As third molar surgery is the most commonly procedure performed in Dentistry and has been accompanied by serious postoperative disorders such as pain, edema and trismus, the study aimed to evaluate if ultrasound device would be able to reduce such postoperative features. The aim of this study was to assess the effects of soft tissue flap elevation, osteotomy and odontosection using piezosurgery versus conventional technique in mandibular third molar extractions.

Material and Methods

Twenty patients with impacted mandibular third molars underwent tooth extractions using two different methods. Ten patients were included in the Piezo Flap Group (PFG - the flap was elevated using piezosurgery) and ten patients were part of the Piezo Ostectomy Group (POG - osteotomy and odontosection were carried out with ultrasound tips). The contralateral tooth was included in the Control Group (CG - conventional technique). The patients were evaluated at postoperative periods of 1, 3, 7 and 14-days. The measured parameters were duration of surgery, pain, trismus and swelling.

Results

The mean duration of surgery for the PFG was 17.21 minutes (CG 10.07 minutes) and POG was 40.09 minutes (CG 15.97 minutes). There was no statistically significant difference in pain and trismus for any of the postoperative periods evaluated in PFG and POG (p>0.05). There was a statistically significant difference in swelling between the PFG and POG, presenting less swelling at the 3-day postoperative period (p=0.038; p<0,05). However, for the remaining analyzed periods there was no difference (p>0.05).

Conclusions

Piezosurgery for tissue elevation of the surgical flap, osteotomy and dental sectioning in mandibular third molar extraction surgery promoted less edema in the early postoperative stages in mandibular third molar extractions despite the longer surgical duration.

Key words:Third molar, piezosurgery, flap, exodontia, ostectomy.

Short-term Haematological Parameters Following Surgical Removal of Mandibular Third Molars with Different Doses of Methylprednisolone Compared with Placebo. A Randomized Controlled Trial

Objectives

To evaluate the influence of a single intraoperative injection of methylprednisolone on short-term haematological parameters following surgical removal of mandibular third molars.

Material and Methods

Fifty-two patients with indications for surgical removal of bilateral impacted mandibular third molars were included in a randomized, split-mouth and double-blinded study design. Each molar were randomly allocated into one of following four groups: 20 mg methylprednisolone, 30 mg methylprednisolone, 40 mg methylprednisolone and placebo. Peripheral blood samples were obtained before and three days after surgery. Haematological parameters involving haemoglobin, white blood cell count and C-reactive protein (CRP) were evaluated and expressed as mean changes. Level of significance was 0.05. Furthermore, outcomes were correlated for age, sex, smoking and time of surgery.

Results

There were no significant differences in postoperative haematological parameters with different doses of methylprednisolone compared with placebo. Peripheral blood samples revealed decreased level of haemoglobin and increased level of leucocytes and CRP in each group. Smokers displayed a significant lower level of haemoglobin and CRP compared with non-smokers (P < 0.05) and level of eosinophils decreased significantly with increasing age (P < 0.05).

Conclusions

This study indicates that a single intraoperative injection of methylprednisolone seems not to cause suppression of short-term haematological parameters compared with placebo following surgical removal of mandibular third molars.

Dynamics of implant site preparation affecting the quality of osseointegrated implants in the maxillary aesthetic zone

PURPOSE

This study compared piezoelectric (PE) and conventional drills (CD) for maxillary aesthetic zone implant insertion.

MATERIAL AND METHODS

This was a prospective split-mouth study. Implants were divided into two groups. Beds were prepared with CDs in group I and PE in group II. The implant stability quotient (ISQ) of the mechanical implant stability (MIS) was measured intraoperatively. The ISQ of the biological implant stability (BIS) was recorded at postoperative second and fourth months. Marginal bone loss (MBL) and bone density (BMD) were measured in the first and second years after prosthetic loading. The osteotomy time was also documented for both techniques. P values <0.05 were considered significant.

RESULTS

Sixty implants in 30 patients were included. PE provided a significantly higher ISQ. All values were above 70 throughout the follow-up period. The mean of the ISQ for MIS was 63.78 ± 1.03 and 73.89 ± 1.05 in group I and group II, respectively (p = 0.003). PE needed significantly longer osteotomy time with a mean of 11.99 ± 0.839 min. The BIS quality had high stability in group II and medium stability in group I throughout the study period. Its values decreased in both groups. Group II had a lesser percentage of decrease. However, it was significant only at time intervals between intraoperative and two months' postoperative (p = 0.004). MBL and BMD demonstrated insignificant results.

CONCLUSION

The implant site preparation with PE devices should be preferred to CDs whenever possible, because they seem to enhance implant stability and osseointegration, especially at the initial stages of healing.

A split-mouth study comparing piezo electric surgery and traditional rotary burs on impacted third molars in young patients: an intraoperative and postoperative evaluation

BACKGROUND

Piezoelectric surgery has been used in many different medical fields, for instance it is used in the field of oral surgery, as a valuable alternative to traditional rotary burs. Its first use dates to 1975 by Horton even if the first effective device for use in dentistry, has been developed by Vercellotti after the year 2000. The hypothesis of this study is that piezosurgery technology is more suitable in terms of specific intra-operative and postoperative evaluations compared to the rotary technology in ostectomy for the avulsion of the third molar germ. The null hypothesis presented is the lack of significant differences between the two technologies after and during surgery.

METHODS

Intraoperative and postoperative aspects are evaluated for a comparison between traditional rotary instruments and piezosurgery during germectomies in young patients through a blind randomized study (split-mouth). The surgical technique to employ for each hemi-arch was randomly selected from a computer algorithm. Different criteria were considered during the surgical procedure, in order to compare the two techniques.

RESULTS

The piezoelectric technique demanded more time than traditional rotary method, and the difference was statistically significant both for the time of the entire procedure and the time only required for the ostectomy itself. Postoperative evaluations such as maximum mouth opening, facial swelling and postoperative pain showed no statistical difference.

CONCLUSIONS

Even if the adopted clinical trial did not highlight any statistical difference the following review of literature showed an encouraging reduction in postoperative discomfort given by the piezosurgery as opposed to the traditional rotary bur surgery. The time taken to complete the operation, however, was longer with piezosurgery compared to traditional burs.

Evaluation of immediate cell viability and repair of osteotomies for implants using drills and piezosurgery. A randomized, prospective, and controlled rabbit study

PURPOSE

The objective of this study was to evaluate the immediate bone damage and bone repair after osteotomy for implants using conventional drills and drills powered by piezoelectric motor.

MATERIALS AND METHODS

Twelve rabbits received a tibial osteotomy with a conventional drill (control), with a diamond like carbon drill (DLC) and with a piezoelectric drill (Piezo). The animals were euthanized immediately, 30 and 60 days postoperatively. The tibias were removed and analyzed by means of histomorphometry, immunohistochemistry and microtomography.

RESULTS

The immediate damage to the tissue at the cavity margins was similar (P > .05). At 30 and 60 days, the amount of newly formed bone tissue was similar (P > .05). Osteocalcin was intense score at 60 days in Piezo group. Microtomography revealed that bone volume at 30 days (control 3.8; DLC 4.3; and Piezo 2.4) and 60 days (control 4.9; DLC 4.82; and Piezo 3.95) were similar. There was a significant difference in bone formation between 30 (2.4) and 60 days (3.95) for the Piezo group (P = .016).

CONCLUSION

The immediate effects and repair of cavities made using conventional, DLC coated, or ultrasound drills were similar.

Piezoelectric bone surgery for impacted lower third molar extraction compared with conventional rotary instruments: a systematic review, meta-analysis, and trial sequential analysis

The aim of this study was to evaluate whether piezoelectric bone surgery (PBS) for impacted lower third molar extraction reduces the surgical time and risk of intra- and postoperative complications in comparison with conventional rotary instruments. This meta-analysis followed the PRISMA guidelines and was registered in the PROSPERO database. The PubMed, Embase, Scopus, and OpenGrey databases were screened for articles published from January 1, 1990 to December 31, 2018. Selection criteria included randomized controlled trials (RCTs) comparing PBS with conventional rotary instruments for impacted lower third molar extraction and reporting any of the clinical outcomes (intra- and postoperative complications and duration of surgery) for both groups. A risk of bias assessment was performed using the Cochrane Collaboration tool. A meta-analysis was performed, and the power of the meta-analytic findings was assessed by trial sequential analysis (TSA). Strong evidence suggests that PBS prolongs the duration of surgery and low evidence suggests that PBS reduces postoperative morbidity (pain and trismus) in comparison with rotary instruments. Data were insufficient to determine whether PBS reduces neurological complications and postoperative swelling in comparison with burs.

Surgical management of compound odontomas: piezoelectric surgery or rotary instruments? A clinical study

BACKGROUND

Odontomas are odontogenic tumors with a clinicopathological heterogeneity and a variable biological behavior. They usually are asymptomatic and can be discovered by routine radiographic investigations. This study aims to examine and compare intra- and postoperative consequences associated with use of piezosurgery and conventional rotary instruments for the removal of these oral lesions.

METHODS

Clinical and histological data of 120 consecutive patients with a mean age of 22 years and 1 month (age range from 19 years and 1 month to 25 years and 3 months) with compound odontomas, diagnosed by biopsy, were assembled. Of a total of 120, 100 oral lesions were placed in the anterior region of the maxilla; of these, 50 were extracted through traditional rotary instruments (GROUP 1) and 50 with piezoelectric surgery (GROUP 2). The remaining 20 oral masses took place in the posterior area of the same bone; of these, 10 were extracted through traditional rotary instruments (GROUP 1a) and 10 with piezosurgery. (GROUP 2b). The piezoelectric cutting device was (Mectron Medical Technology) with MT1-10 insert, pump level 4, vibration level 7. Finally, pain, swelling, and surgical time evaluation were measured 24-48-72 hours after the intervention.

RESULTS

As regards the mean time of surgery, in Group (1 and 1a) were 12 minutes, while in Group (2 and 2a) were 18 minutes. Regarding surgery, the osteotomy of the cortical bone was performed in all cases. As regards the measure of bone saved, calculated through a surgery gauge, it was greater of 3.2 mm in Group (2 and 2a) than in Group (1and 1a). The main of facial swelling in both Groups (1 and 1a) was 5.82 mm and 2.23 mm for the Groups (2 and 2a) immediately after surgery.

CONCLUSIONS

Piezosurgery produced less postoperative discomfort about the swelling. It is an effective technique in daily surgical practice, especially as regards the safety of soft tissues, bone, and nerves.

Randomized clinical study comparing Piezoelectric Surgery with conventional rotatory osteotomy in mandibular third molars surgeries

Purpose

The aim of this study was to evaluate the performance and to assess the postoperative sequel and quality of life after removal of impacted mandibular third molars using piezoelectric surgery compared with conventional rotatory osteotomy.

Patients and methods

A single blinded, randomized, control clinical study was performed. Sixty-three patients (44 males, 19 females) who presented with bilaterally asymptomatic impacted mandibular third molars were included in this analysis. Each patient was treated, at two separate sessions approximately 4 weeks apart, with a conventional rotatory hand piece on one side of the mandible and a piezoelectric device on the contralateral side. Patients were followed up on postoperative days 1, 3, 5, 7, and 15 to rate the pain, swelling and trismus. Inferior alveolar nerve paresthesia was evaluated up to 12 months postoperatively.

Results

The severity of the pain, trismus and swelling using the piezosurgery were significantly different from the rotary group. In both groups, pain was most intense and peaked during the first post-operative day, while swelling and trismus reached peak levels on the third postoperative day. The piezoelectric procedure resulted in a significantly longer procedural duration compared to the rotatory surgery (P < 0.001).

Conclusion

Piezoelectric surgery is considered a viable alternative technique compared to the conventional rotary systems and can improve a patient’s quality of life. Thus, piezoelectric surgery might be a preferred modality for patients undergoing complicated surgical extraction of impacted lower third molars.

"Piezosurgery vs bur in impacted mandibular third molar surgery: Evaluation of postoperative sequelae"

Purpose

Piezosurgery is a relatively novel, precise and safe technique of ostectomy in the domain of oral and maxillofacial surgery. Our aim was to compare the inflammatory outcomes of osteotomy using piezosurgery and conventional bur in impacted mandibular third molar (IM3M) surgery.

Subjects and method

The study implemented a randomized, double-blind, crossover design. 120 sides in 60 patients were randomly allocated to the two interventions used, viz; conventional bur and piezosurgery. The primary outcome variables evaluated were facial swelling, trismus, pain, and paresthesia. Additionally, the duration of surgery and the frequency of soft tissue injuries with the use of two techniques were also evaluated.

Results

Pain, swelling, trismus, and soft tissue injuries emerged to be significantly higher with the use of bur as compared to the piezo. The duration of surgery was significantly extended in the piezo group and no significant difference was observed in the occurrence of paresthesia between the two groups.

Conclusion

The result suggests that piezosurgical osteotomy technique is superior to conventional bur in terms of the postoperative inflammatory outcomes in IM3M surgery.

Evaluation of Surgical Bur Deformation and Bone Surface Roughness After Multiple Uses

PURPOSE

The aim of the present in vitro study was to microscopically evaluate and describe the deformation of Lindeman surgical burs and the bone surface roughness after repeated osteotomies and sterilization cycles.

MATERIALS AND METHODS

Twenty-one Lindeman surgical burs were analyzed under scanning electron microscopy (SEM) to evaluate the damage of the bur's integrity after 0, 1, 3, 5, 7, or 9 osteotomies on bovine ribs. Eighteen bone specimens were obtained after osteotomy for roughness analysis using profilometry. One-way analysis of variance was used to compare the mean roughness values across the experimental groups, and P ≤ .05 was considered to indicate statistical significance.

RESULTS

Representative SEM images illustrated that all analyzed burs presented with some type of deformation at both the tip and the body, even after their first use. The mean roughness values were independent of the number of uses (P > .05); however, the standard deviation increased with the number of uses of the burs.

CONCLUSIONS

These results suggest that even after their first use, rotatory surgical burs will have some type of deformation and that their cutting efficiency on the bone will vary and will be difficult to predict.

Therapeutic efficacy of cryotherapy on facial swelling, pain, trismus and quality of life after surgical removal of mandibular third molars: A systematic review

The objective was to test the hypothesis of no difference in facial swelling, pain, trismus and immediate quality of life after surgical removal of mandibular third molars, with or without post-operative cryotherapy. A MEDLINE (PubMed), EMBASE database and Cochrane library search in combination with a hand search of relevant journals were conducted by including human randomised controlled trials published in English until 17 July 2018. The search identified 37 titles. Six studies with low or unclear risk of bias fulfilled the inclusion criteria. Intermittent cryotherapy for 30 minutes during the first post-operative days significantly diminished facial swelling, pain and trismus compared with no cryotherapy. Patient's satisfaction and perception of recovery were significantly increased with cryotherapy. Therapeutic efficacy of intermittent cryotherapy on post-operative facial swelling, pain and trismus seems to be improved compared with continuous cryotherapy. Considerable variations in study design, diversity of used evaluation methods, outcome measures and various methodological confounding factors posed serious restrictions to review the literature in a quantitative systematic manner. Thus, conclusions drawn from the results of this systematic review should be interpreted with caution. Further well-designed randomised controlled trials including standardised protocol, larger patient sample, blinded outcome assessors, patient-reported outcome measures and three-dimensional volumetric analysis of facial swelling are required before evidence-based recommendations can be provided.

Osteotomy speed, heat development, and bone structure influence by various piezoelectric systems-an in vitro study

OBJECTIVES

The aim of this in vitro study was to evaluate osteotomy speed, heat development, and bone structure influence from osteotomies performed by various piezoelectric devices and insert tips. These devices and tips were compared among each other with regard to conventional rotatory and oscillating systems with special focus on the insert tip design and thickness.

MATERIAL AND METHODS

The osteotomies were conducted on porcine ribs utilizing 12 different insert tips (straight and angulated) and three conventional systems. After time and temperature measurements, histological analysis was carried out. Light microscopy was used to evaluate the roughness of the osteotomic surface and to search for indications of thermal bone necrosis. A special software analyzing tool was employed to determine cutting width (mm) and debris (%).

RESULTS

All piezoelectric tips created smooth cuts. Cutting widths in general were wider than the actual insert tip size with a tendency for narrow straight insert tips producing relatively wide osteotomies, whereas narrow angulated inserts produced relatively small osteotomies. None of the samples demonstrated distinct indication of necrosis. Overall, there was only a small amount of debris in all osteotomy gaps. Conventional rotatory saws were faster and created less heat compared to all tested piezoelectric systems. Straight tips proved faster osteotomy speed than angulated tips. Thin insert tips indicated to have a positive correlation to osteotomy time and performed faster than conventional microsaw. The average temperature rise was lower when using conventional systems, but critical exceeding temperatures were only observed in short-time exceptional cases. In general, temperature rise was less when using angulated inserts.

CONCLUSION

All tested tips are appropriate for bone surgery. Only small differences were found among the piezoelectric insert tips. Although conventional rotatory systems in general performed faster osteotomies, special designed and thin piezoelectric insert tips seem to have a positive influence on osteotomy speed. Ultimately, none of the tested devices or inserts combined all best features of speed, heat development, bone structure influence, and safety.

CLINICAL RELEVANCE

Narrow and straight piezoelectric insert tips demonstrated reduced osteotomy times. Nevertheless, a combination of conventional and piezoelectric systems in clinical practice might be the best way to work time-efficient, patient-oriented, and safe. The choice of instrument should be based on clinical experience of the user and should be evaluated individually depending on the case.

Experimental Comparison of the Performance of Cutting Bone and Soft Tissue between Piezosurgery and Conventional Rotary Instruments

Piezosurgery is an innovative technique widely used for osteotomies in the field of oral and maxillofacial surgery. The surgical technique has been clinically supposed to cut mineralized bone selectively with reducing the risk of damage to adjacent soft tissues. However, none of the previous literature has reported any evidence of scientific experiments to examine performance of the piezoelectric device, i.e. the time required for cutting bone and the effect on soft tissues under the standardized conditions. This study was designed to test the hypothesis that cutting time of the piezoelectric device is longer than that of rotary instruments while the cut surface of bone is smoother and soft tissues are less damaged with piezosurgery under the standardized experimental system. We measured the time for cutting bone and soft tissues of rats with the piezoelectric device and rotary instruments. Damage to soft tissues was examined histologically, and the cut surface of bone was investigated using scanning electron microscopy. Our study demonstrated experimentally that piezosurgery provides a smooth cut bony surface with no damage to soft tissues and takes longer time to cut bone than conventional drillings. We propose that piezosurgery is beneficial for medical safety and usability.

The effects of piezosurgery and submucosal dexamethasone injection on post-operative complications after third molar surgery

BACKGROUND

A retrospective clinical study was performed to compare the post-operative effects of the conventional surgery, piezo surgery technique and submucosal dexamethasone injection in lower third molars extractions.

METHODS

Data from 62 patients, subjected to surgical extraction of lower third molars, were pooled and divided into three groups such as: Conventional Group (22 patients), Piezo Group (20 patients) and Dex Group (conventional surgery + 4 mg/1 mL dexamethasone) (20 patients). Pain, swelling, trismus, analgesic consumption and operation time were comparatively evaluated.

RESULTS

Pain values were found lower in Dex Group in comparison to Conventional Group at 7th day (P = 0.007). Edema found to be higher in Conventional Group than Dex Group at 2nd day (P = 0.025). Minimally trismus values were found in Dex Group and the difference between the Dex and Conventional Group found to be statistically significant both in 2nd (P = 0.048) and 7th days (P = 0.010). The analgesic consumption in the Conventional Group was found to be higher than Piezo Group at 2nd day (P = 0.002).

CONCLUSION

The better post-operative values were obtained in the Dex Group. Although longer operative time is considered to be a disadvantage for the piezo technique, piezotome may be preferred for surgical procedures due to its positive results in comparison to the conventional technique.

A Comparison between Piezoelectric Devices and Conventional Rotary Instruments in Bone Harvesting in Patients with Lip and Palate Cleft: A Retrospective Study with Clinical, Radiographical, and Histological Evaluation

Introduction

Orofacial clefts are congenital malformations characterized by an incomplete shaping of structures that separate the nasal from the oral cavity and can affect the right, left, or both sides. The aim of the present study is to assess, with clinical, radiographical, and histological evaluations, the efficacy of piezoelectric devices compared to traditional rotating instruments in the bone harvesting in patients with history of cleft.

Materials and Methods

We have conducted a retrospective analysis on 20 patients with a history of orofacial clefts that were operated on from February 2014 to June 2017. The patients were divided into two groups: Group R in which bone graft was harvested using a burr and Group P in which the bone graft was obtained by a piezoelectric device. After a healing period of 8 months from the grafting procedure, clinical and radiographic evaluations were performed.

Results and Discussion

The use of the piezoelectric devices in bone harvesting allows a slight improvement in the final volume. This supports a faster integration into the receiving site.

Conclusions

The use of piezoelectric device in patients with history of orofacial cleft that needed bone graft represents a method to be taken into consideration because it has interesting advantages.

Piezosurgery vs conventional rotary instrument in the third molar surgery: A systematic review and meta-analysis of randomized controlled trials

Background/purpose

The surgical removal of mandibular third molars is frequently accompanied by significant postsurgical sequelae. Different instruments such as piezosurgery and conventional rotary handpiece have been used to decrease such adverse events. There are controversial results from randomized controlled trials evaluating the effects of Piezosurgery in the mandibular third molar extraction, compared with conventional rotary instrument. This study was performed to determine the impact of piezosurgery versus conventional rotary instrument on postoperative reactions after extraction.

Materials and methods

A systematic review and meta-analysis was performed to combine relevant RCTs results.

Results

Five RCTs were eligible for this study, enrolling a total of 402 patients. Compared with conventional rotary instrument, pain score at 6 or 7 days and mouth opening at 1 day after surgery was significantly lower in Piezosurgery group (SMD -0.33, 95% CI: −0.56 to −0.10, P = 0.005), as well as swelling score at 7 days after surgery (SMD -1.95, 95% CI: −3.22 to −0.67, P = 0.003). Furthermore, mouth opening at 1 day after surgery was significantly better in patients treated with Piezosurgery (SMD 0.84, 95% CI: 0.19 to 1.49, P = 0.01). However, more operation time will be required for Piezosurgery (MD 6.23, 95% CI: 3.32 to 9.14, P < 0.0001). With regard to analgesic dosage, pooled results from two RCTs suggested there were no significant differences between Piezosurgery and conventional rotary instrument (SMD -1.45, 95% CI: −4.39 to 1.49, P = 0.33).

Conclusion

There might be some advantages on third mandibular molar extraction with piezosurgery compared to conventional rotary instrument. More multi-centre trials are required to get more conclusive results.

Osteoconductive Microarchitecture of Bone Substitutes for Bone Regeneration Revisited

In the last three decades, all efforts in bone tissue engineering were driven by the dogma that the ideal pore size in bone substitutes lies between 0.3 and 0.5 mm in diameter. Newly developed additive manufacturing methodologies for ceramics facilitate the total control over pore size, pore distribution, bottleneck size, and bottleneck distribution. Therefore, this appears to be the method of choice with which to test the aforementioned characteristics of an ideal bone substitute. To this end, we produced a library of 15 scaffolds with diverse defined pore/bottleneck dimensions and distributions, tested them in vivo in a calvarial bone defect model in rabbits, and assessed the clinically most relevant parameters: defect bridging and bony regenerated area. Our in vivo data revealed that the ideal pore/bottleneck dimension for bone substitutes is in the range of 0.7-1.2 mm, and appears therefore to be twofold to fourfold more extended than previously thought. Pore/bottleneck dimensions of 1.5 and 1.7 mm perform significantly worse and appear unsuitable in bone substitutes. Thus, our results set the ideal range of pore/bottleneck dimensions and are likely to have a significant impact on the microarchitectural design of future bone substitutes for use in orthopedic, trauma, cranio-maxillofacial and oral surgery.

Different Dosages of Corticosteroid and Routes of Administration in Mandibular Third Molar Surgery: a Systematic Review

Objectives

The objective of the present systematic review was to test the hypothesis of no difference in facial swelling, pain and trismus after surgical removal of mandibular third molar with different dosages of corticosteroids and administration routes.

Material and Methods

A MEDLINE (PubMed), Embase database and Cochrane Library search in combination with a hand-search of relevant journals was conducted by including randomized controlled trials published in English until 1^st December 2017.

Results

Seven studies fulfilled the inclusion criteria. Considerable variation in the included studies prevented meta-analysis from being performed. Preoperative submucosal injection of corticosteroids significantly diminishes facial swelling, pain and trismus compared with placebo. However, different dosages of corticosteroid and administration routes reveal contrary results indicating that administration of a higher dosage of corticosteroids do not necessarily cause a further decrease in facial swelling, pain and trismus.

Conclusions

Consequently, the optimal dosage of corticosteroids and administration route for diminishing postsurgical morbidity and improve quality of life after surgical removal of mandibular third molar is presently unknown. Therefore, further well-designed randomized clinical trials including a standardised protocol, patient-reported outcome measures and three-dimensional analysis of facial swelling is needed.

Tooth sectioning for coronectomy: how to perform?

OBJECTIVES

The aim of this study was to determine the increase in heat production, preparation time, and cutting surface quality of conventional, high-speed rotating instruments and piezoelectric preparation for coronectomy procedures.

MATERIALS AND METHODS

One hundred intact extracted molars were sectioned horizontally, sub-totally, 1 mm under the cemento-enamel line with five methods: (1) tungsten carbide torpedo (TcT), (2) round (TcR) drills using a conventional speed surgical straight handpiece (< 40,000 min^-1), (3) tungsten carbide fissure (TcF), (4) diamond torpedo (DT) drills using a surgical high-speed, contra-angle handpiece (~ 120,000 min^-1), or (5) a saw-like piezoelectric tip (PT). Temperatures, preparation times, and cutting surface irregularities were registered and the differences were analyzed with ANOVA, Tukey's HSD post hoc test (temperature, time) and with chi-square test (irregular surface).

RESULTS

Rotating instruments produced a maximal temperature increase of less than 1 °C. TcF produced the least heat (ΔT = - 3.92 °C to the baseline), while PT produced significantly the highest temperature increases (ΔT = 12.38 °C, p < 0.001). Tungsten carbide drills were the fastest for coronectomy (from 55.9 to 64.3 s), while DT (169.7 s) while PT (146.8 s) were significantly slower. TcT and TcR drills produced an irregular root surface more frequently.

CONCLUSIONS

During coronectomy, rotating instruments produced entirely acceptable heat, while PT produced unacceptable temperatures. Tungsten carbide drills performed coronectomies effectively, but the diamond torpedo and PT seemed clinically questionable. Considering heat, speed, and the cutting surface quality simultaneously, TcF in a surgical high-speed handpiece seems to be the best choice for coronectomy.

CLINICAL RELEVANCE

The correct insert can significantly reduce excessive heat and operation time during coronectomy procedures.

Stathmin inhibits proliferation and differentiation of dental pulp stem cells via sonic hedgehog/Gli

The mineralization of dental pulp stem cells is an important factor in the tissue engineering of teeth, but the mechanism is not yet obvious. This study aimed to identify the effect of Stathmin on the proliferation and osteogenic/odontoblastic differentiation of human dental pulp stem cells (hDPSCs) and to explore whether the Shh signalling pathway was involved in this regulation. First, Stathmin was expressed in the cytoplasm and on the cell membranes of hDPSCs by cell immunofluorescence. Then, by constructing a lentiviral vector, the expression of Stathmin in hDPSCs was inhibited. Treatment with Stathmin shRNA (shRNA‐Stathmin group) inhibited the ability of hDPSCs to proliferate, as demonstrated by a CCK8 assay and flow cytometry analysis, and suppressed the osteogenic/odontoblastic differentiation ability, as demonstrated by alizarin red S staining and osteogenic/odontoblastic differentiation‐related gene (ALP, BSP, OCN, DSPP) activity, compared to that of hDPSCs from the control shRNA group. Molecular analyses showed that the Shh/GLI1 signalling pathway was inhibited when Stathmin was silenced, and purmorphamine, the Shh signalling pathway activator, was added to hDPSCs in the shRNA‐Stathmin group, real‐time PCR and Western blotting confirmed that expression of Shh and its downstream signalling molecules PTCH1, SMO and GLI1 increased significantly. After activating the Shh signalling pathway, the proliferation of hDPSCs increased markedly, as demonstrated by a CCK8 assay and flow cytometry analysis; osteogenic/odontoblastic differentiation‐related gene (ALP, BSP, OCN, DSPP) expression also increased significantly. Collectively, these findings firstly revealed that Stathmin‐Shh/GLI1 signalling pathway plays a positive role in hDPSC proliferation and osteogenic/odontoblastic differentiation.