Evaluation of the role of autogenous bone-marrow-derived mesenchymal stem cell transplantation for the repair of mandibular bone defects in rabbits

Study on mechanical properties of dual-channel cryogenic 3D printing scaffold for mandibular defect repair

Mandibular defect repair has always been a clinical challenge, facing technical bottleneck. The new materials directly affect technological breakthroughs in mandibular defect repair field. Our aim is to fabricate a scaffold of advanced biomaterials for repairing of small mandibular defect. Therefore, a novel dual-channel scaffold consisting of silk fibroin/collagen type-I/hydroxyapatite (SCH) and polycaprolactone/hydroxyapatite (PCL/HA) was fabricated by cryogenic 3D printing technology with double nozzles. The mechanical properties and behaviors of the dual-channel scaffold were investigated by performing uniaxial compression, creep, stress relaxation, and ratcheting experiments respectively. The experiments indicated that the dual-channel scaffold was typical non-linear viscoelastic consistent with cancellous tissue; the Young's modulus of this scaffold was 60.1 kPa. Finite element analysis (FEA) was employed performing a numerical simulation to evaluate the implantation effect in mandible. The stress distribution of the contact area between scaffold and defect was uniform, the maximum Mises stress of cortical bone and cancellous bone in defect area were 54.520 MPa and 3.196 MPa, and the maximum displacement of cortical bone and cancellous bone in defect area were 0.1575 mm and 0.1555 mm respectively, which distributed in the incisor region. The peak maximum Mises stress experienced by the implanted scaffold was 3.128 × 10-3 MPa, and the maximum displacement was 6.453 × 10-2 mm distributed near incisor area. The displacement distribution of the scaffold was consistent with that of cortical and cancellous bone. The scaffold recovered well when the force applied on it disappeared. Above all, the dual-channel scaffold had excellent bio-mechanical properties in implanting mandible, which provides a new idea for the reconstruction of irregular bone defects in the mandible and has good clinical development prospects.

Evaluation of the Effects of Whey Protein and Moringa Oleifera Leaves Extract Mixture on Osseointegration in Rabbits

Background

Osteogenic, antioxidant and anti-inflammatory effects of Whey protein and M. oleifera gel prompted us to evaluate their role alone or in combination on osseointegration in rabbits.

Methods

In this study, 24 titanium implants were inserted in the femurs of six rabbits. One implant was placed without treatment, and another one was coated with a mixture of whey protein and M. oleifera gel for each side. The animals were divided into two groups of 2- and 6-week intervals and evaluated using histopathological and immunohistochemical techniques.

Results

Histological evaluation revealed a significant difference between the experimental and the control groups after two weeks in osteoblast and osteocyte counts. The experimental group had mature bone development after six weeks of implantation, while the control group had a woven bone. Immunohistochemical results showed that the experimental group, compared to the control group, exhibited early positive expression of osteoblast cells at two weeks after the experiment. Based on histopathological observations, the experimental group showed a tiny area of collagenous fiber in 6th week after the implantation.

Conclusion

A mixture of whey protein and M. oleifera could accelerate osseointegration and healing processes.

Bioactive Scaffolds as a Promising Alternative for Enhancing Critical-Size Bone Defect Regeneration in the Craniomaxillofacial Region

Reconstruction of critical-size bone defects (CSDs) in the craniomaxillofacial (CMF) region remains challenging. Scaffold-based bone-engineered constructs have been proposed as an alternative to the classical treatments made with autografts and allografts. Scaffolds, a key component of engineered constructs, have been traditionally viewed as biologically passive temporary replacements of deficient bone lacking intrinsic cues to promote osteogenesis. Nowadays, scaffolds are functionalized, giving rise to bioactive scaffolds promoting bone regeneration more effectively than conventional counterparts. This review focuses on the three approaches most used to bioactivate scaffolds: (1) conferring microarchitectural designs or surface nanotopography; (2) loading bioactive molecules; and (3) seeding stem cells on scaffolds, providing relevant examples of in vivo (preclinical and clinical) studies where these methods are employed to enhance CSDs healing in the CMF region. From these, adding bioactive molecules (specifically bone morphogenetic proteins or BMPs) to scaffolds has been the most explored to bioactivate scaffolds. Nevertheless, the downsides of grafting BMP-loaded scaffolds in patients have limited its successful translation into clinics. Despite these drawbacks, scaffolds containing safer, cheaper, and more effective bioactive molecules, combined with stem cells and topographical cues, remain a promising alternative for clinical use to treat CSDs in the CMF complex replacing autografts and allografts.

Bone Tissue Engineering Strategies for Alveolar Cleft: Review of Preclinical Results and Guidelines for Future Studies

The current standard of care for an alveolar cleft defect is an autogenous bone graft, typically from the iliac crest. Given the limitations of alveolar bone graft surgery, such as limited supply, donor site morbidity, graft failure, and need for secondary surgery, there has been growing interest in regenerative medicine strategies to supplement and replace traditional alveolar bone grafts. Though there have been preliminary clinical studies investigating bone tissue engineering methods in human subjects, lack of consistent results as well as limitations in study design make it difficult to determine the efficacy of these interventions. As the field of bone tissue engineering is rapidly advancing, reconstructive surgeons should be aware of the preclinical studies informing these regenerative strategies. We review preclinical studies investigating bone tissue engineering strategies in large animal maxillary or mandibular defects and provide an overview of scaffolds, stem cells, and osteogenic agents applicable to tissue engineering of the alveolar cleft. An electronic search conducted in the PubMed database up to December 2021 resulted in 35 studies for inclusion in our review. Most studies showed increased bone growth with a tissue engineering construct compared to negative control. However, heterogeneity in the length of follow up, method of bone growth analysis, and inconsistent use of positive control groups make comparisons across studies difficult. Future studies should incorporate a pediatric study model specific to alveolar cleft with long-term follow up to fully characterize volumetric defect filling, cellular ingrowth, bone strength, tooth movement, and implant support.

A systematic review of bone marrow stromal cells and periosteum-derived cells for bone regeneration

Bone marrow stromal cells (BMSCs) and periosteum-derived cells (PDCs) represent promising skeletal stem cell sources to treat critical-size bone defects. However, the large number of preclinical tests with a variety of in vivo data complicates the selection of cells for further clinical translation. This systematic review aims to analyze the in vivo bone-forming efficacy of BMSCs- and PDCs-based approaches in all published preclinical experiments until November 2020. For this purpose, four databases (PubMed, Embase, Cochrane Central Register of Controlled Trial, and Web of Science) were searched for eligible literature, which yielded a total of 94 full-text articles for systematic review. This review generated an evidence-based list of BMSC- or PDC-based approaches, which have been evaluated for bone formation in different animal models. Among them, 74 studies were included for pairwise and network meta-analysis. The results revealed that both PDC and BMSC had beneficial bone-forming efficacy compared to bare scaffold. In addition, BMSC- and PDC-based approaches had no significant difference regarding in vivo bone-forming efficacy. However, BMSC-based approach had a higher probability to be ranked better than PDC-based approach. Furthermore, the review discusses (i) the possible risk of bias of the in vivo evaluation of cell-based approaches, (ii) the difficulty in replication of such experiments due to frequent poor reporting of the methods and results, and (iii) the clinical relevance of the currently utilized BMSC- and PDC-based approaches. Systematic review registration: The study was prospectively registered in PROSPERO, Registration No. CRD42021270922.

Tissue engineering applications in otolaryngology-The state of translation

While tissue engineering holds significant potential to address current limitations in reconstructive surgery of the head and neck, few constructs have made their way into routine clinical use. In this review, we aim to appraise the state of head and neck tissue engineering over the past five years, with a specific focus on otologic, nasal, craniofacial bone, and laryngotracheal applications. A comprehensive scoping search of the PubMed database was performed and over 2000 article hits were returned with 290 articles included in the final review. These publications have addressed the hallmark characteristics of tissue engineering (cellular source, scaffold, and growth signaling) for head and neck anatomical sites. While there have been promising reports of effective tissue engineered interventions in small groups of human patients, the majority of research remains constrained to in vitro and in vivo studies aimed at furthering the understanding of the biological processes involved in tissue engineering. Further, differences in functional and cosmetic properties of the ear, nose, airway, and craniofacial bone affect the emphasis of investigation at each site. While otolaryngologists currently play a role in tissue engineering translational research, continued multidisciplinary efforts will likely be required to push the state of translation towards tissue-engineered constructs available for routine clinical use.

LEVEL OF EVIDENCE

NA.

Bone regeneration in rabbit calvarial defects using PRGF and adipose-derived stem cells: histomorphometrical analysis

Aim: The aim of this study was to evaluate the osteogenic potential of adipose-derived stem cells (ADSCs) and to assess the influence of plasma rich in growth factors (PRGF) on bone regeneration using ADSCs. Materials & methods: Bone defects were randomly allocated to the five treatment modalities: spontaneous healing, natural bovine bone mineral (BBM), BBM loaded with PRGF, BBM loaded with ADSCs and BBM loaded with a combination of ADSCs and PRGF. Results: The PRGF significantly enhanced the biomaterial-to-bone contact. Defects treated with ADSCs and PRGF or a combination of both showed the greatest bone regeneration. Conclusion: Combining PRGF and ADSCs boosts the bone graft regenerative potential at the earliest period of healing.

Gingival mesenchymal stem cells as an alternative source to bone marrow mesenchymal stem cells in regeneration of bone defects: In vivo study

Healing of critical sized bone defects represents a challenging issue in clinical and research fields. Current therapeutic techniques, such as bone grafts or bone grafts substitutes, still have limitations and drawbacks. Therefore, stem cell-based therapy provides a prospective approach to enhance bone regeneration. The present study aimed to assess the regenerative capacity of Gingival mesenchymal stem cells (GMSCs) as well as Bone marrow mesenchymal stem cells (BMSCs) loaded on NanoBone scaffold, in comparison to the unloaded one, in surgically created bone defects in rabbits' tibiae. To achieve this aim, critical sized bone defects, of 6-mm diameter each, were unilaterally created in tibiae of adult New Zeeland male white rabbits (n = 27). The rabbits were then divided randomly into three groups (9 each) and received the following: Group I: Unloaded NanoBone Scaffold, Group II: GMSCs Loaded on NanoBone Scaffold, and Group III: BMSCs Loaded on NanoBone Scaffold. Three rabbits from each group were then sacrificed at each time point (2, 4 and 6 weeks postoperatively), tibiae were dissected out to evaluate bone healing in the created bony defects; both histologically and histomorphometrically. The findings of this study indicate that both GMSCs and BMSCs exhibited fibroblast morphology and expressed phenotypic MSCs markers. Histologically, local application of GMSCs and BMSCs loaded on NanoBone scaffold showed enhanced the pattern of bone regeneration as compared to the unloaded scaffold. Histomorphometrically, there was astatistically insignificant difference in the new bone area % between the bony defects treated with GMSCs and BMSCs. Thus, GMSCs can be considered as a comparable alternative source to BMSCs in bone regeneration.

Bone Marrow Aspirate in Cystic Maxillofacial Bony Defects

Autogenous or alloplastic bone grafts are routinely applied for reconstruction of cystic bone defects. Addition of mesenchymal bone marrow stem cell in osteoconductive alloplastic bone makes it osteoinductive and osteogenic. The purpose of this study was to evaluate the role of bone marrow aspirate in regenerating new bone with hydroxyapatite collagen scaffold in patients with large cystic maxillofacial defects. This prospective randomized study had random allocation of 15 patients with large cystic maxillofacial bony defects in each of the 2 groups. Group I patients received hydroxyapatite granules and bone marrow aspirate in collagen sponge and group II received hydroxyapatite granules only. Clinical and radiologic assessment showed the time taken in bone healing. In group I, the bone defect volume reduction was statistically significant at 3 and 6 months, the postoperative pain and swelling was less, and there was no tooth mobility at 3 months. The authors concluded that use of hydroxyapatite granules with bone marrow aspirate in collagen sponge in maxillofacial bone defects provided early bone regeneration, and faster wound healing. However, to arrive at a definitive conclusion a long-term study with a larger sample size is required.

Gelfoam haemostatic agent with or without autologous bone marrow-derived stem cells for the regeneration of critical-size mandibular defects in the rabbit

This study evaluated the effect of Gelfoam sponge with and without autologous bone marrow-derived stem cells (BMSCs) on bone regeneration in critical-size mandibular defects. The study involved 56 New Zealand rabbits assigned to four groups (14 in each). The osseous defects in group I were irrigated with normal saline, those in group II were grafted with autogenous tibial bone, and those in group III were filled with Gelfoam sponge. Group IV defects were treated as for group III, but the interface between the Gelfoam sponge and bone surface was injected with BMSCs. At the end of 4weeks, seven rabbits in each group were euthanized; the remaining animals were euthanized at the end of the experiment, at 8 weeks postoperative. The percentage area of newly formed bone was significantly higher in group IV at week 4 (0.030±0.01%) and week 8 (0.060±0.03%) than in group I (0.01±0.00% and 0.02±0.00%, respectively) and group III (0.08±0.01% and 0.015±0.02%, respectively), but was lower than that in group II (0.038±0.02% and 0.082±0.01%, respectively). Thus, the combination of Gelfoam and autologous BMSCs promoted the regeneration of mandibular critical-size defects better than the use of Gelfoam alone. However, the amount of newly generated bone was lower than in defects grafted with autogenous bone.

Three-dimensional macroporous materials for tissue engineering of craniofacial bone

Repair of critical-size defects caused by trauma, removal of a tumour, or congenital abnormalities is a challenge in the craniomaxillofacial region because of the limitations associated with treatment. We have reviewed research papers and updated information relevant to the various types of macroporous scaffolds. We have included papers on several biomaterials and their use in various craniofacial defects such as mandibular, calvarial, and others, as well as the latest technological developments such as 3-dimensional printed scaffolds. We selected all papers about scaffolds, stem cells, and growth factors for review. Initial selection was by review of titles and abstracts, and the full texts of potentially suitable articles were then assessed. Methods of tissue engineering for repair of critical-size defects in the craniofacial bones seem to be viable options for surgical treatment in the future. Macroporous scaffolds with interconnected pores are of great value in regeneration of bone in the craniofacial region. In recent years, various natural or synthetic materials, or both, have been developed, on which macroporous scaffolds can be based. In this review we present a review on the various types of three-dimensional macroporous scaffolds that have been developed in recent years, and evaluate their potential for regeneration of craniofacial bone.

Alveolar bone tissue engineering in critical-size defects of experimental animal models: a systematic review and meta-analysis

Regeneration of large, 'critical-size' bone defects remains a clinical challenge. Bone tissue engineering (BTE) is emerging as a promising alternative to autogenous, allogeneic and biomaterial-based bone grafting. The objective of this systematic review was to answer the focused question: in animal models, do cell-based BTE strategies enhance regeneration in alveolar bone critical-size defects (CSDs), compared with grafting with only biomaterial scaffolds or autogenous bone? Following PRISMA guidelines, electronic databases were searched for controlled animal studies reporting maxillary or mandibular CSD and implantation of mesenchymal stem cells (MSCs) or osteoblasts (OBs) seeded on biomaterial scaffolds. A random effects meta-analysis was performed for the outcome histomorphometric new bone formation (%NBF). Thirty-six studies were included that reported on large- (monkeys, dogs, sheep, minipigs) and small-animal (rabbits, rats) models. On average, studies presented with an unclear-to-high risk of bias and short observation times. In most studies, MSCs or OBs were used in combination with alloplastic mineral-phase scaffolds. In five studies, cells were modified by ex vivo gene transfer of bone morphogenetic proteins (BMPs). The meta-analysis indicated statistically significant benefits in favour of: (1) cell-loaded vs. cell-free scaffolds [weighted mean difference (WMD) 15.59-49.15% and 8.60-13.85% NBF in large- and small-animal models, respectively]; and (2) BMP-gene-modified vs. unmodified cells (WMD 10.06-20.83% NBF in small-animal models). Results of cell-loaded scaffolds vs. autogenous bone were inconclusive. Overall, heterogeneity in the meta-analysis was high (I2  > 90%). In summary, alveolar bone regeneration is enhanced by addition of osteogenic cells to biomaterial scaffolds. The direction and estimates of treatment effect are useful to predict therapeutic efficacy and guide future clinical trials of BTE. Copyright © 2016 John Wiley & Sons, Ltd.

Repair of segmental radial defect with autologous bone marrow aspirate and hydroxyapatite in rabbit radius: A clinical and radiographic evaluation

AIM

Finding an ideal bone substitute to treat large bone defects, delayed union and nonunions remain a challenge for orthopedic surgeons and researchers. Several studies have been conducted on bone regeneration; each has its own advantages and disadvantages. The aim of this study was to evaluate the effect of a combination of hydroxyapatite (HA) powder with autologous bone marrow (BM) aspirate on the repair of segmental radial defect in a rabbit model.

MATERIALS AND METHODS

A total of 36 male and adult New Zealand rabbit with a mean weight of 2.25 kg were used in this study. Approximately, 5 mm defect was created in the mid-shaft of the radius to be filled with HA powder in the control group "HA" (n=18) and with a combination of HA powder and autologous BM aspirate in the test group "HA+BM" (n=18). Animals were observed daily for healing by inspection of the surgical site, and six rabbits of each group were sacrificed at 30, 60, and 90 post-operative days to perform a radiographic evaluation of defect site.

RESULTS

Obtained results revealed a better and more rapid bone regeneration in the test group: Since the defect was rapidly and completely filled with mature bone tissue after 90 days.

CONCLUSION

Based on these findings, we could infer that adding a BM aspirate to HA is responsible of a better regeneration process leading to a complete filling of the defect.

Guided Self-Generation of Vascularized Neo-Bone for Autologous Reconstruction of Large Mandibular Defects

Reconstruction of large mandibular defects is complex and challenging. The authors aimed to individually self-generate a large vascularized bone construct for autologous transplantation without the use of exogenous additives based on the concept of guided self-generation. Using computer-aided design and manufacturing a large size goat mandibular bone was reconstructed in 3 dimensions. Its negative mold printed from hydroxylapatite was temporarily embedded into the costal periosteum along with a contralateral demineralized bone matrix scaffold as control. After 3 months, a mandibular bone construct was obtained and used for autologous transplantation. Osteogenesis and angiogenesis were assessed by real-time imaging, histology, and biomechanical tests during neo-bone formation and up to 6 months after transplantation surgery. A total of 20 animals received implantation of a mandibular bone negative mold along with a contralateral demineralized bone matrix scaffold. Resulting negative mold mandibular bone constructs showed anatomically, histologically, and functionally similar characteristics compared with native controls. Only 1 goat presented partial fibrosis during construct generation with subsequent absorbtion after reconstruction. The absence of exogenous cells, growth factors, and scaffolds facilitated direct translation of this novel concept into clinical application. Further studies are needed to determine functional long-term outcomes and possible extensions to other tissues and organs.

Functional analysis of bioactivated and antiinfective PDLLA - coated surfaces

Common scaffold surfaces such as titanium can have side effects; for example, infections, cytotoxicity, impaired osseointegration, or low regeneration rates for bone tissue. These effects lead to poor implant integration or even implant loss. Therefore, bioactive implants are promising instruments in tissue regeneration. Osteoinductive elements-such as growth factors and anti-infectives-support wound healing and bone growth and thereby enable faster osseointegration, even in elderly patients. In this study, titanium surfaces were coated with a poly-(d,l-lactide) (PDLLA) layer containing different concentrations of copolymer-protected gene vectors (COPROGs) to locally provide bone morphogenetic protein-2 (BMP-2) or activated anti-infective agents, such as chlorhexidine gluconate, triclosan, and metronidazole, to prevent peri-implantitis. The coated titanium implants were then loaded with osteoblasts, NIH 3T3 fibroblasts, and human mesenchymal stem cells in 96-well plates. When shielded by COPROGs as a protective layer and resuspended in PDLLA, BMP-2-encoding pDNA at relatively low doses (5.63 µg/implant) induced the local expression of BMP-2. A linear dose dependence, which is common for recombinant growth factors, was not found, probably due to the retention property of the PDLLA surface. PDLLA, in general, successfully retains additional elements, such as osteoconductive growth factors (BMP-2) and anti-infective agents, which was demonstrated using metronidazole, and thus prevents the systemic application of excessive doses. These bioactive implant surfaces that provide the local release of therapeutic gene vectors or anti-infective agents allow the controlled stimulation of the implant and scaffold osseointegration. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 1672-1683, 2017.

Injectable scaffolds: Preparation and application in dental and craniofacial regeneration

Injectable scaffolds are appealing for tissue regeneration because they offer many advantages over pre-formed scaffolds. This article provides a comprehensive review of the injectable scaffolds currently being investigated for dental and craniofacial tissue regeneration. First, we provide an overview of injectable scaffolding materials, including natural, synthetic, and composite biomaterials. Next, we discuss a variety of characteristic parameters and gelation mechanisms of the injectable scaffolds. The advanced injectable scaffolding systems developed in recent years are then illustrated. Furthermore, we summarize the applications of the injectable scaffolds for the regeneration of dental and craniofacial tissues that include pulp, dentin, periodontal ligament, temporomandibular joint, and alveolar bone. Finally, our perspectives on the injectable scaffolds for dental and craniofacial tissue regeneration are offered as signposts for the future advancement of this field.

Effect of Mesenchymal Stem Cell Application on the Distracted Bone Microstructure: An Experimental Study

PURPOSE

Distraction osteogenesis (DO) is a surgical technique used to regenerate bone. The aim of this study was to improve bone quality and quantity during DO by the addition of mesenchymal stem cells (MSCs).

MATERIALS AND METHODS

The study was conducted on 12 goats assigned to a study group or a control group. In the study group, DO was aided with MSCs. Bone quality was assessed using energy dispersive x-ray (EDX), a scanning electron microscope (SEM), and histology. The histologic assessment was performed by measuring trabecular bone (TB) thickness in sections stained with hematoxylin and eosin (H&E) and by measuring osteoid bone percentage in sections stained with Masson trichrome (MT).

RESULTS

EDX showed an increase in calcification in the study group (mean Ca(2+), 17.58%; standard deviation [SD], 4.9%) compared with the control group (mean Ca(2+), 14.17%; SD, 6.7%). However, the increase was not statistically significant (P = .3354). Histomorphometric analysis of the H&E samples showed an increase in TB size in the study group (mean TB, 174.7 μm; SD, 33.5 μm) compared with the control group (mean TB, 115.4 μm; SD, 19.6 μm), and the increase was highly statistically significant (P = .0039). Analysis of the MT samples showed a decrease in osteoid percentage (mean osteoid percentage, 13.4%; SD, 2%) in the study group compared with the control group (mean osteoid percentage, 27.3%; SD, 3.5%). The decrease in osteoid percentage was statistically significant (P = .0001), indicating more rapid healing in the study group compared with the control group.

CONCLUSION

MSCs improved the bone quality of distracted bone and increased the crystal density in SEM images of the study group compared with that of the control group. MSCs showed promising results in improving the quality and quantity of distracted bone.