Void space and long-term volumetric changes of maxillary sinus floor augmentation with comparison between hydroxyapatite soaked with bone morphogenetic protein 2 and anorganic bovine xenograft alone

Efficacy of hydroxyapatite and fibrin sealant as carriers for bone morphogenetic protein-2 in maxillary sinus floor augmentation: a retrospective study

The aim of this retrospective study was to assess the efficacy of recombinant human bone morphogenetic protein-2 (rhBMP-2) with hydroxyapatite (HA) granules and fibrin sealant (FS) in maxillary sinus floor augmentation (MSFA), with a focus on the volume change. Fifty-two of 137 patients who underwent MSFA with rhBMP-2/HA grafting between June 2016 and December 2022 met the study inclusion criteria; 25 had received rhBMP-2/HA without FS and 27 had received rhBMP-2/HA with FS. Computed tomography (CT) images were obtained preoperatively, immediately following the operation, and at 6 months postoperative. These images were three-dimensionally reconstructed to measure the volumetric and height changes following MSFA. The mean ± standard deviation percentage of volumetric change at 6 months was 48.75 ± 37.44% in the group with FS and 29.77 ± 13.42% in the group without FS (P = 0.019). The vertical height measured at a specific site of the grafted area showed a mean percentage change at 6 months of 4.05 ± 12.08% in the group with FS and 6.07 ± 10.15% in the group without FS (P = 0.518). The additional use of FS as a carrier for rhBMP-2/HA in MSFA was found to improve surgical convenience and bone regeneration ability.

Volumetric changes and graft stability after lateral window sinus floor augmentation: A randomized clinical trial

INTRODUCTION

The present investigation compared the stability and volumetric changes of two different grafting material used for lateral window sinus floor augmentation (LWSFA).

METHODS

Sixteen patients with a total 20 maxillary sinuses in need of LWSFA were included in the present study. The sinuses were grafted with either 100% anorganic bovine bone mineral (ABBM) alone (Group 1) or a mixture (0.8:1 ratio) of ABBM and mineralized cortical allograft (MCA) (Group 2). Cone beam computer tomography (CBCT) was obtained pre-operatively, and at 2-weeks, and 6-months after LWSFA to perform linear measurements including lateral window dimensions, sinus anatomy, residual bone height/thickness (RBH/RBT), and Schneiderian membrane thickness (SMT), among others. Three-dimensional segmentation analysis was used to evaluate changes of bone graft volume/height (GV/GH).

RESULTS

A total of 10 sinuses per group were included in the analysis. No statistically significant difference was found in between groups regarding mean reduction of GV (Group 1: 14.87% ± 16.60%, Group 2: 18.06% ± 9.81%, p = 0.33). Among the linear measurements, only SMT revealed a significant increase after 2-weeks more pronounce in Group 1 (8.70 mm) when compared with Group 2 (5.70 mm) with plausible effect upon LWSFA outcomes. Sinus width showed weak positive correlation with GH reduction after 6 months.

CONCLUSION

This study demonstrated that both ABBM alone and ABBM + MCA represent suitable alternatives for LWSFA with adequate graft stability as they revealed similar volumetric and linear dimensional changes 6 months postoperatively.

Long-Term Changes in Adipose Tissue in the Newly Formed Bone Induced by Recombinant Human BMP-2 In Vivo

Recombinant human bone morphogenetic protein-2 (rhBMP-2) induces osteogenesis and adipogenesis in bone scaffolds. We evaluated rhBMP-2-induced long-term changes in adipose tissue in the newly formed bone in different scaffolds forms. Bovine bone particles and blocks were grafted along with rhBMP-2 in the subperiosteal space of a rat calvarial bone, and the formation of new bone and adipose tissue were evaluated at 6 and 16 weeks after the surgery. The bone mineral density (BMD) and trabecular thickness (TbTh) of the 16w particle group were significantly higher than those of the 6w particle group (p = 0.018 and 0.012, respectively). The BMD and TbTh gradually increased in the particle group from weeks 6 to 16. The average adipose tissue volume (ATV) of the 6w particle group was higher than that of the 16w particle group, although the difference was not significant (p > 0.05), and it decreased gradually. There were no significant changes in the bone volume (BV) and BMD between the 6w and 16w block groups. Histological analysis revealed favorable new bone regeneration in all groups. Adipose tissue was formed between the bone particles and at the center in the particle and block groups, respectively. The adipose tissue space decreased, and the proportion of new bone increased in the 16w particle group compared to that in the 6w group. To summarize, in the particle group, the adipose tissue decreased in a time-dependent manner, BMD and TbTh increased, and new bone formation increased from 6 to 16 weeks. These results suggest that rhBMP-2 effectively induces new bone formation in the long term in particle bone scaffolds.

Clinical and radiographic outcomes of dental implant after maxillary sinus floor augmentation with rhBMP-2/hydroxyapatite compared to deproteinized bovine bone

Objectives

This study aimed to evaluate the clinical and radiographic outcomes of early implant placement and functional loading in maxillary sinus floor augmentation (MSFA) using recombinant human bone morphogenetic protein 2/hydroxyapatite (rhBMP-2/HA) and to compare these outcomes with those of the conventional protocol in MSFA using deproteinized bovine bone (DBB).

Materials and methods

The rhBMP-2/HA and DBB groups consisted of 14 and 13 patients who underwent MSFA with BMP and DBB, respectively. After placement of 22 implants and 21 implants in the rhBMP-2/HA and DBB groups, respectively, abutment connections were performed 3 months after implant placement for the rhBMP-2/HA group and 6 months after implant placement for the DBB group. Changes in grafted sinus height (GSH), marginal bone loss (MBL), and implant stability were evaluated up to one year after functional loading.

Results

Survival rates for the rhBMP-2/HA and DBB groups after one year of functional loading were 90.9% and 90.5%, respectively. Both groups exhibited no significant time-course changes in GSH until one year of functional loading (rhBMP-2/HA, p = 0.124; DBB, p = 0.075). Although significant MBL occurred after one year of functional loading for both groups (rhBMP-2/HA, p < 0.001; DBB, p < 0.001), there were no significant differences in time-course changes in MBL between the two groups (p = 0.450). The mean implant stability quotient values in the rhBMP-2/HA and DBB groups were 75.3 and 75.4 after one year of functional loading, respectively, and there were no significant differences between the two groups (p = 0.557).

Conclusions

MSFA using rhBMP-2/HA allowed implant rehabilitation with early implant placement and functional loading and led to a comparable survival rate and implant stability after 1 year of functional loading with acceptable MBL and stable maintenance of GSH compared to the MSFA using DBB with 6 months of healing after implant placement.

Strategies for advanced particulate bone substitutes regulating the osteo-immune microenvironment

The usage of bone substitute granule materials has improved the clinical results of alveolar bone deficiencies treatment and thus broadened applications in implant dentistry. However, because of the complicated mechanisms controlling the foreign body response, no perfect solution can avoid the fibrotic encapsulation of materials till now, which may impair the results of bone regeneration, even cause the implant materials rejection. Recently, the concept of 'osteoimmunology' has been stressed. The outcomes of bone regeneration are proved to be related to the bio-physicochemical properties of biomaterials, which allow them to regulate the biological behaviours of both innate and adaptive immune cells. With the development of single cell transcriptome, the truly heterogeneity of osteo-immune cells has been clarifying, which is helpful to overcome the limitations of traditional M1/M2 macrophage nomenclature and drive the advancements of particulate biomaterials applications. This review aims at introducing the mechanisms of optimal osseointegration regulated by immune systems and provides feasible strategies for the design of next generation 'osteoimmune-smart' particulate bone substitute materials in dental clinic.

Comparison of Bone Regeneration in Different Forms of Bovine Bone Scaffolds with Recombinant Human Bone Morphogenetic Protein-2

The aim of this study was to compare the bone regeneration ability of particle and block bones, acting as bone scaffolds, with recombinant human bone morphogenetic protein (rhBMP)-2 and evaluate them as rhBMP-2 carriers. Demineralized bovine bone particles, blocks, and rhBMP-2 were grafted into the subperiosteal space of a rat calvarial bone, and the rats were randomly divided into four groups: particle, block, P (particle)+BMP, and B (block)+BMP groups. The bone volume of the B+BMP group was significantly higher than that of the other groups (p < 0.00), with no significant difference in bone mineral density. The average adipose tissue volume of the B+BMP group was higher than that of the P+BMP group, although the difference was not significant. Adipose tissue formation was observed in the rhBMP-2 application group. Histologically, the particle and B+BMP groups showed higher formation of a new bone. However, adipose tissue and void spaces were also formed, especially in the B+BMP group. Hence, despite the formation of a large central void space, rhBMP-2 could be effectively used with block bone scaffolds and showed excellent new bone formation. Further studies are required to evaluate the changes in adipose tissue.

Radiological changes in maxillary sinus morphology after lateral sinus floor augmentation

&lt;b&gt;Background:&lt;/b&gt; Restoration of the masticatory function in patients with edentulous posterior maxilla is often challenging due to the severe atrophy of the alveolar ridges and proximity of the maxillary sinus, resulting in insufficient bone quantity for implant-supported dentures. &lt;br&gt;&lt;b&gt;Aim:&lt;/b&gt; The purpose of this study was to analyze the changes in Schneiderian membrane thickness after lateral sinus floor augmentation (LSFA) using cone beam computed tomography (CBCT). &lt;br&gt;&lt;b&gt;Material and methods:&lt;/b&gt; WLSFA procedures using different bone grafting materials were performed in 87 patients, operated on in two clinical institutions from 2016 to 2018. CBCT examination was performed in all patients before the LSFA procedure, at 1 month after surgery, and after 6 months, before implant placement or loading. &lt;br&gt;&lt;b&gt;Results: &lt;/b&gt;Minor r adiological changes in mucous membrane morphology were observed preoperatively in 17.1% of patients. Postoperative CBCT in the early postsurgical period demonstrated that the number of intact non-specific sinuses decreased significantly, i.e. from 86.7% to 26.7%. The number of cases with local hypertrophia of the mucous membrane increased from 20.3% to 26.7%. Mucosal thickening was observed in 41.7% vs 7.5%. The number of intact sinuses increased to 57.8%. The number of cases with local membrane hypertrophia also increased - to 37.4%. The number of cases with mucosal thickening or fluid accumulation decreased significantly to 11.8 and 5.3% respectively. In 2 cases the development of chronic sinusitis required secondary surgeries. &lt;br&gt;&lt;b&gt;Conclusion:&lt;/b&gt; The present retrospective study revealed that minor radiological changes in the morphology of the maxillary sinus mucosa were observed preoperatively in 17.1% of patients who underwent LSFA procedures. In the early and late postoperative period their frequency increased to 68.5% and 47.1%, respectively. However, the clinical signs of sinusitis developed only in 19.26% of patients. No significant correlations were found between the frequency and severity of postoperative radiological changes and residual bone height, sinus anatomy, initial state of the mucous membrane and type of the grafting material.