Comprehensive kinetic modeling and product distribution for pyrolysis of pulp and paper mill sludge

Pyrolysis holds immense potential for clean treatment of pulp and paper mill sludge (PPMS), enabling efficient energy and chemical recovery. However, current understanding of PPMS pyrolysis kinetics and product characteristics remains incomplete. This study conducted detailed modeling of pyrolysis kinetics for two typical PPMSs from a wastepaper pulp and paper mill, namely, deinking sludge (PPMS-DS) and sewage sludge (PPMS-SS), and analyzed comprehensively pyrolysis products. The results show that apparent activation energy of PPMS-DS (169.25-226.82 kJ/mol) and PPMS-SS (189.29-411.21 kJ/mol) pyrolysis undergoes significant change, with numerous parallel reactions present. A distributed activation energy model with dual logistic distributions proves to be suitable for modeling thermal decomposition kinetics of both PPMS-DS and PPMS-SS, with coefficient of determination >0.999 and relative root mean square error <1.99 %. High temperature promotes decomposition of solid organic materials in PPMS, and maximum tar yield for both PPMS-DS (53.90 wt%, daf) and PPMS-SS (56.48 wt%, daf) is achieved at around 500 °C. Higher levels of styrene (24.45 % for PPMS-DS and 14.71 % for PPMS-SS) and ethylbenzene (8.61 % for PPMS-DS and 8.33 % for PPMS-SS) are detected in tar and could be used as chemicals. This work shows great potential to propel development of PPMS pyrolysis technology, enabling green and sustainable production in pulp and paper industry.

Delayed room temperature phosphorescence enabled by phosphines

Organic ultralong room-temperature phosphorescence (RTP) usually emerges instantly and immediately decays after excitation removal. Here we report a new delayed RTP that is postponed by dozens of milliseconds after excitation removal and decays in two steps including an initial increase in intensity followed by subsequent decrease in intensity. The delayed RTP is achieved through introduction of phosphines into carbazole emitters. In contrast to the rapid energy transfer from single-molecular triplet states (T1) to stabilized triplet states (Tn*) of instant RTP systems, phosphine groups insert their intermediate states (TM) between carbazole-originated T1 and Tn* of carbazole-phosphine hybrids. In addition to markedly increasing emission lifetimes by ten folds, since TM → Tn* transition require >30 milliseconds, RTP is thereby postponed by dozens of milliseconds. The emission character of carbazole-phosphine hybrids can be used to reveal information through combining instant and delayed RTP, realizing multi-level time resolution for advanced information, biological and optoelectronic applications.

Posterior open wound healing in immediate implant placement using reactive soft tissue versus absorbable collagen sponge: a retrospective cohort study

The soft and hard tissue healing of open wounds in immediate implant placement are yet to be explored. The aim of this study was to compare the clinical outcomes of open wound healing using reactive soft tissue (RST) and absorbable collagen sponge (ACS). Forty implants placed immediately in posterior sockets were included; autologous RST was used in 20 and ACS substitute was used in 20. Soft tissue healing was primarily assessed through a novel scoring system and the evaluation of gingival recession. The horizontal bone width (HBW) and interproximal marginal bone level (MBL) were measured on radiographs to observe the hard tissue healing. No significant difference in total soft tissue healing score was observed at 2 weeks postoperatively. Notably, the ACS group showed better tissue colour (P = 0.016) but worse fibrous repair (P = 0.043) scores than the RST group. Gingival recession levels were comparable in the two groups, both before tooth extraction and after placement of the restoration. Regarding hard tissue, HBW and MBL changes showed no intergroup differences. Within the limitations of this study, both RST and ACS seemed effective for open wound closure, achieving ideal soft and hard tissue healing in immediate implant placement.

The three-dimensional stability and accuracy of 3D printing surgical templates: An In Vitro study

OBJECTIVE

To evaluate the three-dimensional (3D) stability and accuracy of additively manufactured surgical templates fabricated using two different 3D printers and materials.

MATERIALS AND METHODS

Forty surgical templates were designed and printed using two different 3D printers: the resin group (n = 20) used a digital light processing (DLP) 3D printer with photopolymer resin, and the metal group (n = 20) employed a selective laser melting (SLM) 3D printer with titanium alloy. All surgical templates were scanned immediately after production and re-digitalized after one month of storage. Similarly, the implant simulations were performed twice. Three-dimensional congruency between the original design and the manufactured surgical templates was quantified using the root mean square (RMS), and the definitive and planned implant positions were determined and compared.

RESULTS

At the postproduction stage, the metal templates exhibited higher accuracy than the resin templates (p < 0.001), and these differences persisted after one month of storage (p < 0.001). The resin templates demonstrated a significant decrease in three-dimensional stability after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05). No significant differences in implant accuracy were found between the two groups. However, the resin templates showed a significant increase in apical and angular deviations after one month of storage (p < 0.001), whereas the metal templates were not affected (p > 0.05).

CONCLUSION

Printed metal templates showed higher fabrication accuracy than printed resin templates. The three-dimensional stability and implant accuracy of printed metal templates remained unaffected by one month of storage.

CLINICAL SIGNIFICANCE

With superior three-dimensional stability and acceptable implant accuracy, printed metal templates can be considered a viable alternative technique for guided surgery.

The VAMP-associated protein VAP27-1 plays a crucial role in plant resistance to ER stress by modulating ER-PM contact architecture in Arabidopsis

The endoplasmic reticulum (ER) and the plasma membrane (PM) form ER-PM contact sites (EPCSs) that allow the ER and PM to exchange material and information. Stress-induced disruption of protein folding triggers ER stress and the cell initiates the unfolded protein response (UPR) to resist the stress. However, whether EPCSs in plants play a role in ER stress remain unclear. VESICLE-ASSOCIATED MEMBRANE PROTEIN (VAMP)-ASSOCIATED PROTEIN 27-1 (VAP27-1) functions in EPCS tethering and is encoded by a family of ten genes (VAP27-1-10) in Arabidopsis thaliana. Here, we used CRISPR/Cas9-mediated genome editing to obtain a homozygous vap27-1 vap27-3 vap27-4 (vap27-1/3/4) triple mutant lacking three of the key VAP27 family members in Arabidopsis. The vap27-1/3/4 mutant exhibited defects in ER-PM connectivity and EPCS architecture, and excessive UPR signaling. We further showed that relocation of VAP27-1 to the PM mediates specific VAP27-1-related EPCS remodeling and expansion under ER stress. Moreover, the spatiotemporal dynamics of VAP27-1 at the PM increase ER-PM connectivity and enhance Arabidopsis resistance to ER stress. In addition, we uncovered an important role for intracellular calcium homeostasis in the regulation of UPR signaling. Taken together, our results broaden the understanding of the molecular and cellular mechanisms of ER stress and UPR signaling in plants, providing additional clues for improving plant broad-spectrum resistance to different stresses.

New Insights into MeHg Accumulation in Rice (Oryza sativa L.): Evidence from Cysteine

The intake of methylmercury (MeHg)-contaminated rice poses immense health risks to rice consumers. However, the mechanisms of MeHg accumulation in rice plants are not entirely understood. The knowledge that the MeHg-Cysteine complex was dominant in polished rice proposed a hypothesis of co-transportation of MeHg and cysteine inside rice plants. This study was therefore designed to explore the MeHg accumulation processes in rice plants by investigating biogeochemical associations between MeHg and amino acids. Rice plants and underlying soils were collected from different Hg-contaminated sites in the Wanshan Hg mining area. The concentrations of both MeHg and cysteine in polished rice were higher than those in other rice tissues. A significant positive correlation between MeHg and cysteine in rice plants was found, especially in polished rice, indicating a close geochemical association between cysteine and MeHg. The translocation factor (TF) of cysteine showed behavior similar to that of the TF of MeHg, demonstrating that these two chemical species might share a similar transportation mechanism in rice plants. The accumulation of MeHg in rice plants may vary due to differences in the molar ratios of MeHg to cysteine and the presence of specific amino acid transporters. Our results suggest that cysteine plays a vital role in MeHg accumulation and transportation inside rice plants.

Innovative principle of implant-oriented fibula placement in mandibular reconstruction using double-barrel fibula and simultaneous implants: A technical note

Simultaneous or secondary inserted implants with double-barrel fibula to reconstruct the mandible have become a common method. However, difficulties in later restoration caused by placement errors of fibula or incipiently placed implants have also been reported in some studies. This note describes a novel technique of implant-oriented guide plates helpful for mandible ablation, fibula segmentation and positioning, and implant placement. We design a series of guide plates especially an implant-fibula placing guide plate, and record and fix the relative spatial positions of the remaining teeth, the simultaneous implants and upper fibula. During surgery, the placement of upper fibula is oriented towards appropriate placement of implants. Therefore, the position of upper fibula can meet the requirements of simultaneous implant as much as possible. Within the limits of present observation, we believe that this technique may increase the manipuility while reducing the errors and the risk of complications.

Vascularized fascial flap for reconstruction of combined oral mucosa-mandibular defects: The multi-modal biological assessment

OBJECTIVE

The reconstruction of composite defects in the oral and maxillofacial region using vascularized fascial flaps, such as the fibular, iliac, and temporal fascial flaps, has gained increasing attention among surgeons. However, there remains uncertainty regarding the suitability of fascial flaps as transplants, as well as their healing processes and outcomes, due to their non-mucosal nature. This study aims to comprehensively assess the biological aspects of vascularized fascial flaps at clinical, histological, and genetic levels, with the goal of providing essential biological references for their clinical application.

STUDY DESIGN

This study enrolled three patients who underwent reconstruction of combined oral mucosa-mandibular defects using fibular vascularized fascial flaps between 2020 and 2023. Data regarding changes in the appearance of the fascial flaps, bulk-RNA sequencing, and histological slices of initial fascia, initial gingiva, and transformed fascia were collected and analyzed.

RESULTS

Within three months, the fascial flaps exhibited rapid epithelial coverage and displayed distinct characteristics resembling mucosa. High-throughput RNA sequencing analyses and histological slices revealed that the transformed fascia exhibited tissue structures similar to mucosa and demonstrated unique advantages in promoting blood vessel formation and reducing scarring through the high-level expression of relevant genes.

CONCLUSION

These findings emphasize the potential and feasibility of utilizing vascularized fascial flaps for oral mucosa reconstruction, establishing their unique advantage as transplant materials, and providing significant biological information and references for their selection and clinical application.

Guided bone regeneration for peri-implant augmentation: A retrospective study comparing two surgical techniques with a mean follow-up of 26 months

OBJECTIVES

To introduce a modified guided bone regeneration (GBR) technique using intact periosteum and deproteinized bovine bone mineral (DBBM) for peri-implant augmentation and compare the clinical outcomes with those of conventional GBR.

MATERIALS AND METHODS

Patients who received peri-implant augmentation in posterior sites between 2015 and 2021 were reviewed in this study. Group A was treated with a modified GBR technique, and Group B was treated with conventional GBR. For group comparison, propensity score matching was performed with a sensitivity analysis. The implant survival rate, dimensional changes in hard tissue, marginal bone loss (MBL), and peri-implant parameters were evaluated.

RESULTS

In total, 114 implants from 98 patients were included. The implant survival rates were 95.74% in Group A and 95.00% in Group B during the follow-up period. At 6 months, the median horizontal thickness was recorded at 0.87 mm (IQ1-IQ3 = 0.00-1.75 mm) in Group A, exhibiting a relatively lower value compared to the corresponding measurement of 0.98 mm (IQ1-IQ3 = 0.00-1.89 mm) in Group B (p = .937). Vertical height displayed no statistically significant intergroup difference between the two groups (p = .758). The mean follow-up period was 25.83 ± 12.93 months after loading in Group A and 27.47 ± 21.29 months in Group B (p = .761). MBL and peri-implant parameters were comparable between the two groups.

CONCLUSIONS

Within the limitations of this study, the modified GBR technique using intact periosteum and DBBM grafting might be a viable alternative to correct bone defects around implants in molar and premolar sites.

A nomogram prediction of implant apical non-coverage on bone-added transcrestal sinus floor elevation: A retrospective cohort study

OBJECTIVES

To identify the risk indicators and develop and validate a nomogram prediction model of implant apical non-coverage by comprehensively analyzing clinical and radiographic factors in bone-added transcrestal sinus floor elevation (TSFE).

MATERIAL AND METHODS

A total of 260 implants in 195 patients receiving bone-added TSFE were included in the study. The population was divided into a development (180 implants) and a validation (80 implants) cohort. According to 6 months post-surgery radiographic images, implants were categorized as "apical non-coverage" or "apical covered." The association of risk factors including clinical and radiographic parameters with implant apical non-coverage was assessed using regression analyses. A nomogram prediction model was developed, and its validation and discriminatory ability were analyzed.

RESULTS

The nomogram predicting bone-added TSFE's simultaneously placed implant's apex non-coverage after 6 months. This study revealed that sinus angle, endo-sinus bone gain, implant protrusion length, graft contact walls, and distal angle were predictors of implant apical non-coverage. The generated nomogram showed a strong predictive capability (area under the curve [AUC] = 0.845), confirmed by internal validation using 10-fold cross-validation (Median AUC of 0.870) and temporal validation (AUC = 0.854). The calibration curve and decision curve analysis demonstrated good performance and high net benefit of the nomogram, respectively.

CONCLUSIONS

The clinical implementation of the present nomogram is suitable for predicting the apex non-coverage of implants placed simultaneously with bone-added TSFE after 6 months.

Intracranial mesenchymal tumor with multiple extracranial metastases: A case report and literature review

This study presents a rare case of an older woman with an intracranial mesenchymal tumor in the right frontal and parietal lobes. Despite prompt surgical intervention, her condition rapidly deteriorated because of tumor dissemination, leading to her demise. We highlight the tumor's marked invasiveness and heterogeneity, coupled with a propensity for distant systemic metastasis, which negatively impacted the patient's prognosis. This particular clinical behavior had not been previously reported, making this a novel observation. Thus, through a comprehensive review of relevant literature, we aim to provide valuable insights for further understanding, diagnosing, and treating such tumors.

Country-specific net-zero strategies of the pulp and paper industry

The pulp and paper industry is an important contributor to global greenhouse gas emissions1,2. Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries3,4. Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019-about 3.2% of global anthropogenic greenhouse gas emissions from the same period5-and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry.

High-Efficiency Ultraviolet Electroluminescence from Multi-Resonance Phosphine Oxide Polycyclic Aromatics

Efficient ultraviolet (UV) electroluminescent materials remain a great challenge, since short peak wavelength <400 nm and narrow full width at half maximum (FWHM) <50 nm are simultaneously required. In this sense, multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters featuring narrow-band emissions hold the promise for UV applications. Herein, a novel MR-TADF skeleton featuring carbazole-phosphine oxide (P=O) fused aromatics is developed to construct the first two UV MR emitters named CzP2PO and tBCzP2PO. In addition to synergistic resonance effects of P=O and N atom, sp3 -hybrid P atom renders the curved polycyclic planes of CzP2PO and tBCzP2PO, giving rise to their narrowband UV emissions with peak wavelengths <390 nm and FWHM<35 nm. Besides configuration quasi-planarization for radiation enhancement and quenching suppression, P=O moiety further enhances singlet-triplet coupling to facilitate reverse intersystem crossing, resulting in the state-of-the-art photoluminescence quantum yield of 62 % in tBCzP2PO doped films. As consequence, tBCzP2PO endowed its UV organic light-emitting diodes with the peak at 382 nm and FWHM of 32 nm, and especially the record-high external quantum efficiency (EQE) of 15.1 % among all kinds of UV devices. Our results demonstrate great potential of P=O based MR emitters in practical applications including optoelectronics, biology and medicine science.

Combination of a surgical template and a collagen strip for guiding sinus floor elevation in the oblique sinus floor: A technical note

Sinus floor elevation (SFE) by transcrestal approach has been proven to be a predictable and minimally invasive treatment that augments posterior maxilla with insufficient bone height, allowing the prosthetic rehabilitation of this area with dental implants. However, precise and sufficient elevation of the Schneiderian membrane without perforation is challenging through this blind technique especially in the presence of anatomical restrictions. This note describes a novel technique combining a surgical template and an absorbable collagen sponge (ACS) strip for transcrestal SFE in the oblique sinus floor. A surgical template was used to locate the oblique sinus floor and a collagen strip was placed to orient membrane elevation, meanwhile, protect the sinus membrane. Within the limits of present observation, this technique may increase the manipuility while reducing the risk of complications.

Tracing immune cells around biomaterials with spatial anchors during large-scale wound regeneration

Skin scarring devoid of dermal appendages after severe trauma has unfavorable effects on aesthetic and physiological functions. Here we present a method for large-area wound regeneration using biodegradable aligned extracellular matrix scaffolds. We show that the implantation of these scaffolds accelerates wound coverage and enhances hair follicle neogenesis. We perform multimodal analysis, in combination with single-cell RNA sequencing and spatial transcriptomics, to explore the immune responses around biomaterials, highlighting the potential role of regulatory T cells in mitigating tissue fibrous by suppressing excessive type 2 inflammation. We find that immunodeficient mice lacking mature T lymphocytes show the typical characteristic of tissue fibrous driven by type 2 macrophage inflammation, validating the potential therapeutic effect of the adaptive immune system activated by biomaterials. These findings contribute to our understanding of the coordination of immune systems in wound regeneration and facilitate the design of immunoregulatory biomaterials in the future.

Bulk Passivation Enables Hundredfold-Enhanced Electroluminescence of Monophosphine Cu4 I4 Cubes

Electroluminescent (EL) clusters emerged rapidly, owing to their organic-inorganic hybrid character useful for comprehensive performance integration and the potential for large-scale display and lighting applications. However, despite their good photoluminescent (PL) properties, until present, no efficient EL monodentate ligand-based clusters were reported due to structural variation during processing and excitation and exciton confinement on cluster-centered quenching states. Here we demonstrate an effective bulky passivation strategy for efficient cluster light-emitting diodes with a monophosphine Cu4 I4 cube named [TMeOPP]4 Cu4 I4 . With terminal pyridine groups, an active matrix named TmPyPB supports an effective host-cluster interplay for configuration fixation, structural stabilization, and exciton-confinement optimization. Compared to common inactive hosts, the passivation effects of TmPyPB markedly reduce trap-state densities by 24-40 % to suppress nonradiative decay, resulting in state-of-the-art PL and EL quantum yields reaching 99 % and 15.6 %, respectively, which are significantly improved by about 7-fold. TmPyPB simultaneously increases EL luminance to 104 nits, which is ≈100-fold that of the non-doped analogue.

Interfacial Passivation Enormously Enhances Electroluminescence of Triphenylphosphine Cu4 I4 Cube

Defect is one of the key factors limiting optoelectronic performances of organic-inorganic hybrid systems. Although high-efficiency bidentate ligands based electroluminescent (EL) clusters reported, until present, only few EL clusters based on monodentate ligands are realized since their structural instability induces more surface/interface defects. Herein, this bottleneck is first overcome in virtue of interfacial passivation by electron transporting layers (ETL). Through using TmPyPB with meta-linked pyridines as ETL, photoluminescent (PL) and EL quantum efficiencies of the simplest monophosphine Cu4 I4 cube [TPP]4 Cu4 I4 are greatly improved by ≈2 and 23 folds, respectively, as well as ≈200 folds increased luminance, corresponding to a huge leap from nearly unlighted (<20 nits) to highly bright (>3000 nits). The passivation effect of TmPyPB on surface defects of cluster layer is embodied as preventing interfacial charge trapping and suppressing exciton nonradiation.

Effectiveness and complications of transcrestal sinus floor elevation using the cushioned grind-out technique: A retrospective cohort study with up to 7 years of follow-up

AIM

To evaluate the effectiveness and complications of the cushioned grind-out technique. The primary outcome was endo-sinus bone gain (ESBG), while secondary outcomes included the Schneiderian membrane perforation rate and mid- to long-term implant survival.

MATERIALS AND METHODS

In this retrospective study, we compared the cushioned grind-out technique with the classic osteotome technique, establishing statistical models to assess ESBG, membrane perforation rate and implant survival rate.

RESULTS

A total of 259 patients and 340 implants were included. The mean ESBG was 5.31 mm for the cushioned grind-out group and 4.64 mm for the osteotome group. Multivariable regression analysis revealed that the cushioned grind-out technique significantly facilitated ESBG (p = .028). Nineteen preparation sites experienced membrane perforation, with rates of 5.5% and 6.4% for the cushioned grind-out and osteotome groups, respectively. However, the difference was not statistically significant (p = .920). Additionally, the cumulative survival rate of the implants for 7 years was 95.2% and 91.4%, respectively, with the surgical technique not significantly influencing the results.

CONCLUSIONS

With 6 months to 7 years of post-prosthetic restoration review data, our findings show that the cushioned grind-out technique facilitates a higher ESBG, with no significant difference in membrane perforation or implant failure rate.

Star-shaped incision technique for gingiva patients treated with implant-supported fixed prosthesis

To evaluate the modified star-shaped incision on gingival sulcus for reducing horizontal food impaction around implant-supported restoration. Total 24 patients receiving bone-level implant placement were enrolled, a star-shaped incision was made on the gingiva sulcus before the placement of zirconia crown. Follow-up examination was carried out 3 and 6 months after final restoration, respectively. Assessment of soft tissue includes papilla height, modified plaque index, modified sulcus bleeding index, periodontal depth, gingival biotype and gingival margin level. Marginal bone level was measured on periapical radiographs. Only 1 patient complained about the horizontal food impaction. Both the mesial and distal papilla almost filled the entire proximal space, in good harmony with the adjacent papillae. No recession of the gingival margin was found around the crown even in the patients with thin gingival biotype. Other parameters of soft tissue including modified plaque index, modified sulcus bleeding index and periodontal depth remained low during the whole follow-up visit. The resorption of marginal crestal bone was less than 0.6 mm during the first 6 month, and there was no significant difference among baseline, 3-month and 6-month visit. The modified star-shaped incision on the gingiva sulcus maintained the gingival papilla height and reduced the occurrence of horizontal food impaction, and no recession of the gingiva margin was found around implant-supported restoration.

Effect of the implant apical exposure and coverage < or ≥ 2 mm bone graft on transcrestal sinus floor elevation: a 1- to 7-year retrospective cohort study

OBJECTIVES

This study aimed to analyze the effect of the apex coverage by the bone graft, including exposure and coverage less than or greater than 2 mm on implant survival rate and peri-implant bone and soft tissue remodeling.

MATERIALS AND METHODS

A total of 264 implants in 180 patients who had undergone transcrestal sinus floor elevation (TSFE) with simultaneous implant placement were included in this retrospective cohort study. Radiographic assessment was used to categorize the implants into three groups based on apical implant bone height (ABH): ≤ 0 mm, < 2 mm, or ≥ 2 mm. The implant survival rate, peri-implant marginal bone loss (MBL) during short-term (1-3 years) and mid- to long-term (4-7 years) follow-up, and clinical parameters were used to evaluate the effect of implant apex coverage after TSFE.

RESULTS

Group 1 had 56 implants (ABH ≤ 0 mm), group 2 had 123 implants (ABH > 0 mm, but < 2 mm), and group 3 had 85 implants (ABH ≥ 2 mm). There was no significant difference in the implant survival rate between groups 2 and 3 compared to group 1 (p = 0.646, p = 0.824, respectively). The MBL during short-term and mid- to long-term follow-up indicated that apex coverage could not be considered a risk factor. Furthermore, apex coverage did not have a significant effect on other clinical parameters.

CONCLUSIONS

Despite limitations, our study found that implant apex coverage by the bone graft, including exposure and coverage levels less than or greater than 2 mm, did not significantly affect implant survival, short-term or mid- to long-term MBL, or peri-implant soft tissue outcomes.

CLINICAL RELEVANCE

Based on 1- to 7-year data, the study suggests that implant apical exposure and coverage levels of less than or greater than 2 mm bone graft are both valid options for TSFE cases.

Implant Placement with Simultaneous Guided Bone Regeneration in the Anterior Region Close to the Periapical Lesion of Adjacent Teeth: A Combined Treatment Strategy to Prevent Complications

PURPOSE

To evaluate the safety and performance of a potential novel strategy to resolve the above scenario by simultaneously performing implant-related surgery and endodontic microsurgery (EMS).

MATERIALS AND METHODS

A total of 25 subjects requiring GBR during implant placement in anterior areas were allocated into two groups. In the experimental group (adjacent teeth with periapical lesions) with 10 subjects, implantation and GBR were performed for edentulous areas with simultaneous EMS for adjacent teeth. In the control group (adjacent teeth without periapical lesions) with 15 subjects, implantation and GBR were performed for edentulous areas. The clinical outcomes, radiographic bone remodeling, and patient-reported outcomes were assessed.

RESULTS

Within a 1-year follow-up, the implant survival rate was 100% in both groups, with no significant difference regarding complications. All teeth achieved complete healing following EMS. Repeated analysis of variance (ANOVA) measurements revealed a significant change over time in horizontal bone widths and postoperative patient-reported outcomes, but no intergroup statistically significant differences (P > .05) in horizontal bone widths and visual analog scale scores of pain, swelling, and bleeding were observed. Likewise, the bone volumetric decrease (7.4% ± 4.5% in the experimental group and 7.1% ± 5.2% in the control group) from T1 (suture removal) to T2 (6 months after implantation) revealed no intergroup differences. The horizontal bone width gain at the implant platform was slightly lower in the experimental group (P < .05). Interestingly, the color-coded figures of both groups showed a facial reduction of grafted material in edentulous areas. However, the apical regions following EMS exhibited stable bone remodeling in the experimental group.

CONCLUSION

This novel approach to address the problem involving implant-related surgery close to the periapical lesion of adjacent teeth appeared safe and reliable (no.: ChiCTR2000041153). Int J Oral Maxillofac Implants 2023;38:533-544. doi: 10.11607/jomi.9839.

Cushioned grind-out technique transcrestal sinus floor elevation for simultaneous implantation in severe atrophic maxilla: A retrospective study with up to 7 years of follow-up

OBJECTIVES

This study aimed to evaluate the effects of the cushioned grind-out technique transcrestal sinus floor elevation for simultaneous implant placement with ≤4 mm of residual bone height (RBH).

MATERIALS AND METHODS

This was a retrospective propensity score matching (PSM) study. Five PSM analyses included the confounding variables of Schneiderian membrane perforation, early and late implant failure, and peri-implant apical and marginal bone resorption. After PSM, we compared the difference in five aspects between the RBH ≤ 4 and >4 mm groups.

RESULTS

A total of 214 patients with 306 implants were included in this study. After PSM, the generalized linear mixed model (GLMM) indicated that RBH ≤ 4 mm had no significantly higher risk of Schneiderian membrane perforation and early and late implant failure (p = .897, p = .140, p = .991, respectively). The implant cumulative 7-year survival rate of the RBH ≤ 4 and >4 mm groups was 95.5% and 93.9%, respectively (log-rank test: p = .900). Within at least 40 cases per group after PSM, two multivariate GLMMs indicated that RBH ≤ 4 mm could not be identified as the promotive factor of bone resorption of either endo-sinus bone gain or crest bone level (RBH × time interaction p = .850, p = .698, respectively).

CONCLUSIONS

Within the limitations, 3 months to 7 years of post-prosthetic restoration review data indicated an acceptable mid-term survival and success rate of applying the cushioned grind-out technique in RBH ≤ 4 mm cases.

Assessing life-cycle GHG emissions of recycled paper products under imported solid waste ban in China: A case study

Changes of raw materials in China's recycled paper industry after the imported solid waste ban affect products' life-cycle greenhouse gas (GHG) emissions as well. This paper presented a case study of newsprint production with prior- and post-ban scenarios with life cycle assessment, including using imported waste paper (P0) and its three substitutions, i.e., virgin pulp (P1), domestic waste paper (P2), and imported recycled pulp (P3). The function unit is 1 ton of newsprint produced in China, and the study is conducted from cradle to grave which consists pulping and papermaking process, from raw material acquisition to manufacturing, with associated energy production and wastewater treatment, transport, and chemicals production. Our results showed that P1 holds the highest life-cycle GHG emission of 2724.91, followed by 2400.88 from P3. P2 has the lowest emission of 1619.27, only slightly lower than 1742.39 before the ban using route P0 (unit: kgCO₂e/ton paper). Scenario analysis showed that current average life-cycle GHG emission for one ton of newsprint is 2049.33 kgCO₂e, increased by 17.62 % due to the ban, while this number could be reduced to 12.22 % or even -0.79 % if switching from P1 to P3 and P2. Our study highlighted the importance of domestic waste paper as a promising way to reduce GHG emissions, which still has great potential to increase if with an enhanced waste paper recycling system in China.

The effect of ROS-YAP crosstalk on osteoimmune response orchestrating osteogenesis

Bone defect repair is a common medical concern. In spite of various existing treatments, its management still requires improvement. Here we show that YAP, a downstream signaling of Hippo pathway, might interplay with redox oxygen species (ROS) and modulate osteoimmunology, which refers to the interaction between immune and skeletal system during bone defect repair. We modulated the ROS level of RAW264.7 cells and found YAP level was reversely regulated. Meanwhile, we detected the feedback of YAP on oxidation level. The results demonstrated that the antioxidant enzyme expression was in proportion to the YAP level of RAW264.7 cells. Additionally, indirect coculture system was applied and it indicated that RAW264.7 cells under oxidative stress could impede proliferation and migration ability of MC3T3-E1 pre-osteoblasts. Consistently, in vivo experiment verified high oxidant level slowed down mice osteogenesis during bone defect repair, while antioxidant and upregulation of YAP accelerated this process. Additionally, we established a mouse model with YAP conditional knockout in macrophages. The results identified that deficiency of YAP in macrophages negatively affected bone defect repair in vivo. In summary, our study indicated that ROS and YAP could jointly modulate osteogenesis via their effect on osteoimmunology.ABBREVIATIONS: GPX4, glutathione peroxidase 4; NAC, N-Acetyl-L-cysteine; qRT-PCR, real-time quantitative PCR; ROS, reactive oxygen species; Tb.N, trabecular number; Tb.Sp, trabecular separation.

Optical Amplification at 637 and 1067 nm Based on Organic Molecule AQ(PhDPA)2 and NdIII Complex Codoped Polymer Waveguides

Based on the molecular energy transfer mechanism, relative gains at 1067 and 637 nm wavelengths are achieved in thermally activated delayed fluorescence molecule AQ(PhDPA)₂ and Nd complex with chelating phosphine oxide as ligands codoped polymer waveguides, with the excitation of low-power UV light-emitting diodes (LEDs) instead of traditional semiconductor lasers as pump sources. For AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) (DBTTA = dibenzotetrathienoacene, DBFDPO = 4,6-bis (diphenylphosphoryl) dibenzofuran) -codoped polymethylmethacrylate (PMMA), and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO) (FDPO = 9,9-bis (diphenylphosphorylphenyl) fluorene)-codoped PMMA polymers with a mass ratio of 1:4 respectively, when they are spin-coated as upper claddings, the relative gains of 2.2 and 1.8 dB cm^-1 at 1067 nm are obtained in evanescent-field waveguides with cross-section of 4 × 8 µm² under excitation of 300 mW 405 nm LED, and the gains of 3.9 and 4.9 dB cm^-1 at 637 nm are achieved with pumping of 530 mW 450 nm LED respectively. By growing a 100 nm-thick aluminum reflector with the waveguides, the optical gain at 1067 and 637 nm can be enhanced to 3.5 and 6.1 dB cm^-1 , corresponding to AQ(PhDPA)₂ -Nd(DBTTA)₃ (DBFDPO) and AQ(PhDPA)₂ -Nd(DBTTA)₃ (FDPO)-codoped PMMA polymers, respectively.

Phosphine-Manipulated p-π and π-π Synergy Enables Efficient Ultralong Organic Room-Temperature Phosphorescence

Organic room temperature phosphorescence (RTP) attracts extensive attentions, but still faces the challenge of achieving both high RTP efficiencies (ηRTP) and long lifetimes (τRTP), due to the intrinsic contradiction between triplet radiation and stabilization. In this work, we developed three carbazole-triphenylphosphine hybrids named xCzTPP, in which phosphine groups provide nonbonding electrons and steric hindrance to modulate intermolecular p-π and π-π interactions. With the rational orientations and spatial positions of functional groups, para-substituted pCzTPP achieves high ηRTP over 10% and more than twofold increased τRTP (> 600 ms), compared to ortho- and meta- isomers. Theoretical simulation and photophysical investigation indicate that the strongest intermolecular p-π and π-π electronic interplays of pCzTPP harmonize high transition probability of 3pπ state and triplet stability of 3ππ state, reflecting the p-π and π-π synergy in RTP process.

High-Gain of NdIII Complex Doped Optical Waveguide Amplifiers at 1.06 and 1.31 µm Wavelengths Based on Intramolecular Energy Transfer Mechanism

Chelate phosphine oxide ligand (9,9-dimethyl-9H-xanthene-4,5-diyl) bis (diphenylphosphineoxide) (XPO) is prepared as a neutral ligand to synthesize complex Nd (TTA)₃ (XPO) (TTA = 2-thenoyltrifluoroacetone). An appropriate energy gap between the XPO and TTA ligands, which can support two additional energy transfer routines from the first excited triplet state (T₁ ) energy level of the XPO to that of the TTA, improves energy transfer in the Nd complex. Based on intramolecular energy transfer mechanism, optical gains at 1.06 and 1.31 µm are demonstrated in Nd (TTA)₃ (XPO)-doped polymer waveguides with the excitation of low-power light-emitting diodes (LEDs) instead of semiconductor lasers as pump sources. Using the vertical top-pumping mode of a 365 nm LED, relative gains of 22.5 and 8.4 dB cm^-1 are obtained at 1.06 and 1.31 µm, respectively, in a 0.2 cm long embedded waveguide with a cross-section of 8 × 5 µm² . The active core layer is Nd (TTA)₃ (XPO)-doped SU-8 polymer. Moreover, relative gains are achieved in evanescent-field waveguide with a cross-section of 6 × 4 µm² . The 21.0 and 5.6 dB cm^-1 relative gains are achieved at 1.06 and 1.31 µm, respectively, with a net gain of 13.8 ± 0.3 dB cm^-1 obtained at 1.06 µm in a 0.9 cm long SU-8 waveguide with Nd (TTA)₃ (XPO)-doped polymethylmethacrylate as upper cladding.

Plant-Derived Polyphenol and LL-37 Peptide-Modified Nanofibrous Scaffolds for Promotion of Antibacterial Activity, Anti-Inflammation, and Type-H Vascularized Bone Regeneration

The regeneration of oral tissues is a challenging clinical problem because of the complex microbial and biological stress environments. Electrospun fibrous scaffolds have attracted significant interest as effective barrier membranes for guided bone regeneration (GBR); however, no mature strategy yet exists for the surface modification of fibers to provide versatility to satisfy clinical requirements. This study demonstrated a practical biosafety strategy: the combined use of plant polyphenols and LL-37 peptides to modify the fiber surface to endow the fibrous scaffold with antimicrobial activity, immunoregulation, and vascularized bone regeneration. We confirmed that the LL-37 peptides interacted with tannic acid (TA) through noncovalent bonds through experiments and molecular docking simulation analysis. In vitro experiments showed that the TA coating imparted strong antibacterial properties to the fibrous scaffold, but it also caused cytotoxicity. The grafting of LL-37 peptide promoted the spreading, migration, and osteogenic differentiation of mesenchymal stem cells and was also conducive to the M2 polarization of RAW264.7 cells. In vivo experiments further verified that the LL-37 peptide-grafted fibrous scaffold significantly enhanced angiogenesis, anti-inflammatory effects, and type-H vascularized bone regeneration. Overall, the fibrous scaffold modified by the LL-37 peptide through TA grafting has significant potential for GBR applications.

Evaluating evasion strategies in zebrafish larvae

An effective evasion strategy allows prey to survive encounters with predators. Prey are generally thought to escape in a direction that is either random or serves to maximize the minimum distance from the predator. Here, we introduce a comprehensive approach to determine the most likely evasion strategy among multiple hypotheses and the role of biomechanical constraints on the escape response of prey fish. Through a consideration of six strategies with sensorimotor noise and previous kinematic measurements, our analysis shows that zebrafish larvae generally escape in a direction orthogonal to the predator's heading. By sensing only the predator's heading, this orthogonal strategy maximizes the distance from fast-moving predators, and, when operating within the biomechanical constraints of the escape response, it provides the best predictions of prey behavior among all alternatives. This work demonstrates a framework for resolving the strategic basis of evasion in predator-prey interactions, which could be applied to a broad diversity of animals.

Immunomodulatory Biomaterials and Emerging Analytical Techniques for Probing the Immune Micro-Environment

After implantation of a biomaterial, both the host immune system and properties of the material determine the local immune response. Through triggering or modulating the local immune response, materials can be designed towards a desired direction of promoting tissue repair or regeneration. High-throughput sequencing technologies such as single-cell RNA sequencing (scRNA-seq) emerging as a powerful tool for dissecting the immune micro-environment around biomaterials, have not been fully utilized in the field of soft tissue regeneration. In this review, we first discussed the procedures of foreign body reaction in brief. Then, we summarized the influences that physical and chemical modulation of biomaterials have on cell behaviors in the micro-environment. Finally, we discussed the application of scRNA-seq in probing the scaffold immune micro-environment and provided some reference to designing immunomodulatory biomaterials. The foreign body response consists of a series of biological reactions. Immunomodulatory materials regulate immune cell activation and polarization, mediate divergent local immune micro-environments and possess different tissue engineering functions. The manipulation of physical and chemical properties of scaffolds can modulate local immune responses, resulting in different outcomes of fibrosis or tissue regeneration. With the advancement of technology, emerging techniques such as scRNA-seq provide an unprecedented understanding of immune cell heterogeneity and plasticity in a scaffold-induced immune micro-environment at high resolution. The in-depth understanding of the interaction between scaffolds and the host immune system helps to provide clues for the design of biomaterials to optimize regeneration and promote a pro-regenerative local immune micro-environment.

Genome-wide analysis of the Populus trichocarpa laccase gene family and functional identification of PtrLAC23

INTRODUCTION

Biofuel is a kind of sustainable, renewable and environment friendly energy. Lignocellulose from the stems of woody plants is the main raw material for "second generation biofuels". Lignin content limits fermentation yield and is therefore a major obstacle in biofuel production. Plant laccase plays an important role in the final step of lignin formation, which provides a new strategy for us to obtain ideal biofuels by regulating the expression of laccase genes to directly gain the desired lignin content or change the composition of lignin.

METHODS

Multiple sequence alignment and phylogenetic analysis were used to classify PtrLAC genes; sequence features of PtrLACs were revealed by gene structure and motif composition analysis; gene duplication, interspecific collinearity and Ka/Ks analysis were conducted to identify ancient PtrLACs; expression levels of PtrLAC genes were measured by RNA-Seq data and qRT-PCR; domain analysis combine with cis-acting elements prediction together showed the potential function of PtrLACs. Furthermore, Alphafold2 was used to simulate laccase 3D structures, proLAC23::LAC23-eGFP transgenic Populus stem transects were applied to fluorescence observation.

RESULTS

A comprehensive analysis of the P. trichocarpa laccase gene (PtLAC) family was performed. Some ancient PtrLAC genes such as PtrLAC25, PtrLAC19 and PtrLAC41 were identified. Gene structure and distribution of conserved motifs clearly showed sequence characteristics of each PtrLAC. Combining published RNA-Seq data and qRT-PCR analysis, we revealed the expression pattern of PtrLAC gene family. Prediction results of cis-acting elements show that PtrLAC gene regulation was closely related to light. Through above analyses, we selected 5 laccases and used Alphafold2 to simulate protein 3D structures, results showed that PtrLAC23 may be closely related to the lignification. Fluorescence observation of proLAC23::LAC23-eGFP transgenic Populus stem transects and qRT-PCR results confirmed our hypothesis again.

DISCUSSION

In this study, we fully analyzed the Populus trichocarpa laccase gene family and identified key laccase genes related to lignification. These findings not only provide new insights into the characteristics and functions of Populus laccase, but also give a new understanding of the broad prospects of plant laccase in lignocellulosic biofuel production.

Macrophage response mediated by extracellular matrix: recent progress

Biomaterials are one of efficient treatment options for tissue defects in regenerative medicine. Compared to synthetic materials which tend to induce chronic inflammatory response and fibrous capsule, extracellular matrix (ECM) scaffold materials composed of biopolymers are thought to be capable of inducing a pro-regenerative immune microenvironment and facilitate wound healing. Immune cells are the first line of response to implanted biomaterials. In particular, macrophages greatly affect cell behavior and the ultimate treatment outcome based on multiple cell phenotypes with various functions. The macrophage polarization status is considered as a general reflection of the characteristics of the immune microenvironment. Since numerous reports has emphasized the limitation of classical M1/M2 nomenclature, high-resolution techniques such as single-cell sequencing has been applied to recognize distinct macrophage phenotypes involved in host responses to biomaterials. After reviewing latest literatures that explored the immune microenvironment mediated by ECM scaffolds, this paper describe the behaviors of highly heterogeneous and plastic macrophages subpopulations which affect the tissue regeneration. The mechanisms by which ECM scaffolds interact with macrophages are also discussed from the perspectives of the ECM ultrastructure along with the nucleic acid, protein, and proteoglycan compositions, in order to provide targets for potential therapeutic modulation in regenerative medicine.

Evaluating Evasion Strategies in Zebrafish Larvae

An effective evasion strategy allows prey to survive encounters with predators. Prey are generally thought to escape in a direction that is either random or serves to maximize the minimum distance from the predator. Here we introduce a comprehensive approach to determine the most likely evasion strategy among multiple hypotheses and the role of biomechanical constraints on the escape response of prey fish. Through a consideration of six strategies with sensorimotor noise and previous kinematic measurements, our analysis shows that zebrafish larvae generally escape in a direction orthogonal to the predator's heading. By sensing only the predator's heading, this orthogonal strategy maximizes the distance from fast-moving predators, and, when operating within the biomechanical constraints of the escape response, it provides the best predictions of prey behavior among all alternatives. This work demonstrates a framework for resolving the strategic basis of evastion in predator-prey interactions, which could be applied to a broad diversity of animals.

Evaluating Evasion Strategies in Zebrafish Larvae

An effective evasion strategy allows prey to survive encounters with predators. Prey are generally thought to escape in a direction that is either random or serves to maximize the minimum distance from the predator. Here we introduce a comprehensive approach to determine the most likely evasion strategy among multiple hypotheses and the role of biomechanical constraints on the escape response of prey fish. Through a consideration of six strategies with sensorimotor noise and previous kinematic measurements, our analysis shows that zebrafish larvae generally escape in a direction orthogonal to the predator's heading. By sensing only the predator's heading, this orthogonal strategy maximizes the distance from fast-moving predators, and, when operating within the biomechanical constraints of the escape response, it provides the best predictions of prey behavior among all alternatives. This work demonstrates a framework for resolving the strategic basis of evastion in predator-prey interactions, which could be applied to a broad diversity of animals.

Using the intact periosteum for horizontal bone augmentation of peri-implant defects: a retrospective cohort study

The objectives of this study were to observe hard tissue changes in guided bone regeneration (GBR) with intact periosteum and soft block deproteinised bovine bone mineral (DBBM), and evaluate whether the result of horizontal bone augmentation varied by initial peri-implant defect depth. Forty patients with a single missing tooth and contained peri-implant defect were categorised into three groups according to their presurgical defect depth (≤ 2, 2-4, and 4-6 mm). Cone-beam computed tomography (CBCT) images were collected and reconstructed preoperatively, postoperatively, and at six months' follow up. The buccal bone width (BBW -0, -3, -5), alveolar bone width (ABW -0, -3, -5) and volume of augmented area were measured. At the six-month follow up the increase in BBW, ABW at all levels, and in bone volume, was statistically significant (all p < 0.001). No statistical significance in bone dimensions or bone resorption was found among groups (all p > 0.05). Histological analysis detected new bone formation in intimate contact with bone grafts underlying the periosteum. Within the limitations of this study, the insights gained may be of assistance to suggest that comparable and acceptable results of horizontal bone augmentation can be achieved in cases of peri-implant defect depth of ≤6 mm by means of GBR with intact periosteum.

Infrared Single-Frame Small Target Detection Based on Block-Matching

The robust detection of small targets is one of the crucial techniques in an infrared system. It is still a challenge to detect small targets under complex backgrounds. Aiming at the problem where infrared small target detection is easily disturbed by complex backgrounds, an infrared single frame detection method based on a block-matching approach is proposed in this paper. Firstly, the input infrared image is processed by extracting blocks from it. A new infrared model is constructed by finding blocks that are similar to each such block. Then, the small target detection based on the block-matching model is formulated as an optimization problem of recovering low-rank and sparse matrices, which are effectively solved using robust principal component analysis. Finally, the results of processing are reconstructed to obtain the target and background images. A simple segmentation method is used to segment the target image. The experimental results from the actual infrared sequences show that the proposed method has better background suppression ability under complex backgrounds and better detection performance than conventional baseline methods.

Application of an assembled surgical guide for lateral approach sinus augmentation and sinus septum management: A technical note

The presence of maxillary septa may render sinus augmentation more challenging particularly when encountered at the ideal implant position. This article demonstrated a novel technique for lateral access sinus augmentation using an assembled surgical guide to achieve proper lateral window outline, precise septum identification and osteotomy, and secure membrane detachment. This technique increases the predictability and efficiency of the procedure while reducing the risk of complications.

One case report of laparoscopic biological patch repair for the ureterosciatic hernia and literature review

Ureterosciatic hernia is a very rare disease worldwide. We report a successful case of laparoscopic biological repair of large ureteral hernia. Preoperative CT examination showed ureterosciatic hernia with incarceration and proximal ureteral dilatation. Laparoscopic ureteral incarceration release, ureteral stent placement and biological patch repair of sciatic foramen hernia were performed. Under the observation of laparoscope, the stent was placed through urethra with cystoscope to restore the course of ureter. A biological patch was placed behind the ureter to cover the closed hernia ring. We have been followed up for 2 months after operation. According to the reexamination, the effect is obvious. Laparoscopic biological patch repair for ureteral sciatic foramen hernia has the advantages of less trauma, convenient operation and ideal prognosis in theory.

Isotopic and Spectroscopic Investigation of Mercury Accumulation in Houttuynia cordata Colonizing Historically Contaminated Soil

Houttuynia cordata Thunb (H. cordata) is a native vegetable colonizing mercury (Hg) mining sites in the southwest of China; it can accumulate high Hg concentrations in the rhizomes and roots (edible sections), and thus consumption of H. cordata represents an important Hg exposure source to human. Here, we studied the spatial distribution, chemical speciation, and stable isotope compositions of Hg in the soil-H. cordata system at the Wuchuan Hg mining region in China, aiming to provide essential knowledge for assessing Hg risks and managing the transfer of Hg from soils to plants and agricultural systems. Mercury was mainly compartmentalized in the outlayer (periderm) of the underground tissues, with little Hg being translocated to the vascular bundle of the stem. Mercury presented as Hg-thiolates (94% ± 8%), with minor fractional amount of nanoparticulate β-HgS (β-HgS_NP, 15% ± 4%), in the roots and rhizomes. Analysis of Hg stable isotope ratios showed that cysteine-extractable soil Hg pool (δ²⁰²Hg_cys), root and rhizome Hg (δ²⁰²Hg_root, δ²⁰²Hg_rhizome) were isotopically lighter than Hg in the bulk soils. A significant positive correlation between δ²⁰²Hg_cys and δ²⁰²Hg_root was observed, suggesting that cysteine-extractable soil Hg pool was an important Hg source to H. cordata. The slightly positive Δ¹⁹⁹Hg value in the plant (Δ¹⁹⁹Hg_root = 0.07 ± 0.07‰, 2SD, n = 21; Δ¹⁹⁹Hg_rhizome = 0.06 ± 0.06‰, 2SD, n = 22) indicated that minor Hg was sourced from the surface water. Our results are important to assess the risks of Hg in H. cordata, and to develop sustainable methods to manage the transfer of Hg from soils to agricultural systems.

Horizontal ridge augmentation in the anterior maxilla with in situ onlay bone grafting: a retrospective cohort study

OBJECTIVES

This study aimed to introduce a digitally guided in situ autogenous onlay grafting technique and compare its effectiveness with the conventional (ex situ) onlay technique in augmenting horizontal bone defects of the anterior maxilla.

MATERIALS AND METHODS

This retrospective cohort study included 24 patients who had received autogenous onlay bone grafts combined with guided bone regeneration (GBR) in the anterior maxilla. Fourteen patients were recruited into the in situ onlay grafting group (EG), and 10 were recruited into the ex situ onlay group (CG), defined by the donor sites. The clinical parameters, radiographic changes, micro-CT, and histological processes were evaluated after a mean follow-up period of 1.7 years.

RESULTS

The horizontal bone width reflected significant bone modeling over time (p < 0.001) in the first 6 months. Multivariable analysis showed that the treatment modality (grouping) was a critical factor positively associated with vertical bone height alteration. However, neither the alteration rate of horizontal bone width nor the bone volume was associated with the treatment modality. The number of periosteal screws per graft positively affected horizontal contour maintenance (p < 0.05). No significant differences were observed between the groups in the clinical parameters (complications, success rate, and peri-implant parameters). The micro-CT and histological outcomes were similar between the groups.

CONCLUSION

Despite the limitations of this study, in situ onlay grafting combined with GBR was an effective and reliable approach for horizontal bone augmentation in the anterior maxilla and appeared to demonstrate better stability in vertical bone remodeling.

CLINICAL RELEVANCE

This study introduces a modified and minimally invasive technique of onlay grafting for horizontal bone augmentation. This in situ onlay grafting demonstrates superior stability in vertical bone remodeling. The trial registration number is ChiCTR2100054683.

Ambipolar Self-Host Functionalization Accelerates Blue Multi-Resonance Thermally Activated Delayed Fluorescence with Internal Quantum Efficiency of 100

Emerging multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters can combine 100% exciton harvesting and high color purity for their organic light-emitting diodes (OLED). However, the highly planar configurations of MR molecules lead to intermolecular-interaction-induced quenching. A feasible way is integrating host segments into MR molecules, namely a "self-host" strategy, but without involving additional charge transfer and/or vibrational components to excited states. Herein, an ambipolar self-host featured MR emitter, tCBNDADPO, is demonstrated, whose ambipolar host segment (DADPO) significantly and comprehensively improves the TADF properties, especially greatly accelerated singlet radiative rate constant of 2.11 × 10⁸ s^-1 and exponentially reduced nonradiative rate constants. Consequently, at the same time as preserving narrowband blue emission with an FWHM of ≈28 nm at a high doping concentration of 30%, tCBNDADPO reveals state-of-the-art photoluminescence and electroluminescence quantum efficiencies of 99% and 30%, respectively. The corresponding 100% internal quantum efficiency of tCBNDADPO supported by an ultrasimple trilayer and heavily doped device demonstrates the feasibility of the ambipolar self-host strategy for constructing practically applicable MR materials.

Strategies for advanced particulate bone substitutes regulating the osteo-immune microenvironment

The usage of bone substitute granule materials has improved the clinical results of alveolar bone deficiencies treatment and thus broadened applications in implant dentistry. However, because of the complicated mechanisms controlling the foreign body response, no perfect solution can avoid the fibrotic encapsulation of materials till now, which may impair the results of bone regeneration, even cause the implant materials rejection. Recently, the concept of 'osteoimmunology' has been stressed. The outcomes of bone regeneration are proved to be related to the bio-physicochemical properties of biomaterials, which allow them to regulate the biological behaviours of both innate and adaptive immune cells. With the development of single cell transcriptome, the truly heterogeneity of osteo-immune cells has been clarifying, which is helpful to overcome the limitations of traditional M1/M2 macrophage nomenclature and drive the advancements of particulate biomaterials applications. This review aims at introducing the mechanisms of optimal osseointegration regulated by immune systems and provides feasible strategies for the design of next generation 'osteoimmune-smart' particulate bone substitute materials in dental clinic.

Optimizing Bleaching Operating Conditions Based on Mathematical Programming to Reduce AOX Emissions

This study describes the optimization of a eucalyptus elemental chlorine-free (ECF) bleach plant to reduce adsorbable organic halogen (AOX). The correlations between operating conditions of each stage and pulp quality indices as well as the AOX content in wastewater are analyzed, taking an ECF bleaching technology (D₀EpPD₁) as an example. The calculation models of pulp quality indices and AOX content in wastewater are established. Then, an optimization model aiming at minimizing AOX emission is structured. The model shows a good simulation effect because the errors between the calculated and experimental values are within 6.3%. By analyzing the impact of various operating conditions on AOX emissions, it was found that chlorine dioxide reduced in the D₀ stage has the greatest impact on AOX. The optimization results show that AOX can be reduced from 90.84 to 79.58 kg/h, a decrease of 12.5%. The verification experiment results based on the optimized operating conditions showed that the experimental results are in good agreement with the calculated results of the optimization model, and the effect of reducing AOX based on the optimization model is obvious.

Inhibition of Rgs10 aggravates periodontitis with collagen-induced arthritis via the NF-κB pathway

OBJECTIVE

To explore the role of the Rgs10-associated nuclear factor (NF)-κB signalling pathway in periodontitis with rheumatoid arthritis.

METHODS

Porphyromonas gingivalis and collagen were locally applied to mice to establish in vivo periodontitis and rheumatoid arthritis models, respectively. Both agents were administered together to establish the comorbid group. All models were treated with adeno-associated virus-green fluorescent protein (AAV-GFP) or adeno-associated virus small hairpin Rgs10 (AAV-sh-Rgs10). In vivo expression of Rgs10 and inflammatory cytokines was analysed, along with exploration of the NF-κB signalling pathway in lipopolysaccharide (LPS)-stimulated mouse-derived RAW264.7 cells, with and without treatment of small interfering RNA (siRNA; Rgs10-Mus-MSS245072).

RESULTS

In the comorbidity mouse group (mice with both periodontitis and rheumatoid arthritis), inhibition of Rgs10 exacerbated periodontitis, along with upregulation of phospho-RelA (pP65), tumour necrosis factor-α (TNF-α), and interleukin-6 (IL-6) expression in the NF-κB signalling pathway. Similarly, treatment of LPS-stimulated RAW264.7 cells with siRNA resulted in the inhibition of Rgs10, along with upregulation of pP65, TNF-α, and IL-6 expression in vitro.

CONCLUSION

Inhibition of Rgs10 in mice with periodontitis and rheumatoid arthritis can promote the progression of periodontitis, indicating the potential therapeutic role of Rgs10 in this condition.

A Hydroponic Study on Effect of Zinc Against Mercury Uptake by Triticale: Kinetic Process and Accumulation

We investigated the ability of triticale uptake of Mercury (Hg), clarified whether triticale root uptake of Hg²⁺ via Zinc (Zn²⁺) transports, using hydroponic experiments. At 25℃, when Hg exposure in solution was lower than 20 μM, Hg concentration in the roots can be better described by a hyperbolic function, which shows a saturable characteristic. Under ice-cold (< 2℃) conditions, a nonsaturable (linear) component was found. Low exposure of Zn²⁺ (0-1 μM) inhibited plant Hg uptake when Hg exposure in the solution ranged from 1 to 10 μM, it showed an antagonistic effect of Zn on plant uptake of Hg. When Hg exposure was 20 μM, it revealed a synergistic effect of Zn on plant uptake of Hg, Hg in the root increased at the Zn (1 μM) exposure in the solution. Our results will deepen the understanding of Hg transfer in the soil-plant system.