In vitro degradation of nanoparticles prepared from polymers based on DL-lactide, glycolide and poly(ethylene oxide)

Studying the stability of polymer nanoparticles by size exclusion chromatography of radioactive polymers

The properties of nanomedicines will influence how they can deliver drugs to patients reproducibly and effectively. For conventional pharmaceutical products, Chemistry, Manufacturing and Control (CMC) documents require monitoring stability and storage conditions. For nanomedicines, studying these important considerations is hindered by a lack of appropriate methods. In this paper, we show how combining radiolabelling with size exclusion chromatography, using a method called SERP (for Size Exclusion of Radioactive Polymers), can inform on the in vitro degradation of polymer nanoparticles. Using nanoparticles composed of biodegradable poly(lactic acid) (PLA) and poly(lactic-co-glycolic acid) (PLGA), we show that SERP is more sensitive than dynamic light scattering (DLS) and nanoparticle tracking analysis (NTA) to detect degradation. We also demonstrate that the properties of the polymer composition and the nature of the aqueous buffer affect nanoparticle degradation. Importantly, we show that minute changes in stability that cannot be detected by DLS and NTA impact the pharmacokinetic of nanoparticles injected in vivo. We believe that SERP might prove a valuable method to document and understand the pharmaceutical quality of polymer nanoparticles.

Rigid-flexible nanocarriers loaded with active peptides for antioxidant and anti-inflammatory applications in skin

Peptides are recognized as highly effective and safe bioactive ingredients. However, t their practical application is limited and hampered by harsh conditions for practical drug delivery. Hence, a novel peptide nanocarrier of copper peptide (GHK-Cu) encapsulation developed by liposome technology combined with the classical Chinese concept of rigidity and flexibility. Different polyols were selected as modification ligands for phospholipid bilayers to construct a nano drug-carrying system with high loading rate, good stability and biocompatibility. In vitro, this complex not only significantly retarded the release ability of copper peptides, but also enabled copper peptides to be effectively resistant to enzymatic degradation. Furthermore, cellular experiments showed that this system mainly regulates Nrf2, SIRT1, and PEG2/COX-2-related signaling pathways, thus effectively counteracting cellular inflammation, senescence, and apoptosis from oxidative damage. Interestingly, a green, non-toxic, efficient and convenient antioxidant system was developed for the prevention and deceleration of skin aging.

Engineered Organic Nanorockets with Light-Driven Ultrafast Transportability for Antitumor Therapy

Nanomedicines confront various complicated physiological barriers limiting the accumulation and deep penetration in the tumor microenvironment, which seriously restricts the efficacy of antitumor therapy. Self-propelled nanocarriers assembled with kinetic engines can translate external energy into orientated motion for tumor penetration. However, achieving a stable ultrafast permeability at the tumor site remains challenging. Here, sub-200 nm photoactivated completely organic nanorockets (NRs), with asymmetric geometry conveniently assembled from photothermal semiconducting polymer payload and thermo-driven macromolecular propulsion through a straightforward nanoprecipitation process, are presented. The artificial NRs can be remotely manipulated by 808 nm near-infrared light to trigger the photothermal conversion and Curtius rearrangement reaction within the particles for robustly pushing nitrogen out into the solution. Such a two-stage light-to-heat-to-chemical energy transition effectively powers the NRs for an ultrafast (≈300 µm s^-1 ) and chemical medium-independent self-propulsion in the liquid media. That endows the NRs with high permeability against physiological barriers in the tumor microenvironment to directionally deliver therapeutic agents to target lesions for elevating tumor accumulation, deep penetration, and cellular uptake, resulting in a significant enhancement of antitumor efficacy. This work will inspire the design of advanced kinetic systems for powering intelligent nanomachines in biomedical applications.

Polymer-based particles against pathogenic fungi: A non-uptake delivery of compounds

The therapy of life-threatening fungal infections is limited and needs urgent improvement. This is in part due to toxic side effects of clinically used antifungal compounds or their limited delivery to fungal structures. Until today, it is a matter of debate how drugs or drug-delivery systems can efficiently reach the intracellular lumen of fungal cells and how this can be improved. Here, we addressed both questions by applying two different polymeric particles for delivery of compounds. Their formulation was based on two biocompatible polymers, i.e., poly(lactic-co-glycolic acid)_50:50 and poly(methyl methacrylate-stat-methacrylic acid)_90:10 yielding particles with hydrodynamic diameters ranging from 100 to 300 nm. The polymers were covalently labeled with the fluorescent dye DY-550 to monitor the interaction between particles and fungi by confocal laser scanning microscopy. Furthermore, the fluorescent dye coumarin-6 and the antifungal drug itraconazole were successfully encapsulated in particles to study the fate of both the cargo and the particle when interacting with the clinically most important human-pathogenic fungi Aspergillus fumigatus, A. terreus, Candida albicans, and Cryptococcus neoformans. While the polymers were exclusively located on the fungal surface, the encapsulated cargo was efficiently transported into fungal hyphae, indicated by increased intracellular fluorescence signals due to coumarin-6. In accordance with this finding, compared to the pristine drug a reduced minimal inhibitory concentration for itraconazole was determined, when it was encapsulated. Together, the herein used polymeric particles were not internalized by pathogenic fungi but were able to efficiently deliver hydrophobic cargos into fungal cells.

Sequential-delivery nanocomplex for combined anti-angiogenesis and gene therapy against colorectal cancer

Neovascularization can provide tumors with essential nutrients and oxygen, as well as maintain a microenvironment for tumor cell growth. In this study, we combined anti-angiogenic therapy and gene therapy for synergistic anti-tumor therapy. We co-delivered the vascular endothelial growth factor receptor inhibitor fruquintinib (Fru) and small interfering RNA CCAT1 (siCCAT1) inhibiting epithelial-mesenchymal transition using 1,2-distearoyl-snglycero-3-phosphoethanolamine-N- [methoxy (polyethylene glycol)] with a pH-responsive benzoic imine linker bond (DSPE-Hyd-mPEG) and polyethyleneimine-poly (d, l-lactide) (PEI-PDLLA) nanocomplex (Fru and siCCAT1 co-delivery NP, FCNP). Due to the characteristics of pH-response, DSPE-Hyd-mPEG removed from FCNP after enrichment at the tumor site, which had a protective effect in the body. Meanwhile, Fru acting on the peritumor blood vessels was rapidly released, and then the nanoparticles loaded with siCCAT1 (CNP) was engulfed by cancer cells and facilitate the successful lysosomal escape of siCCAT1 in, playing the role of silencing CCAT1. Efficient silencing of CCAT1 by FCNP was observed, and simultaneously, the expression of VEGFR-1 was also down-regulated. Furthermore, FCNP elicited significant synergistic antitumor efficacy via anti-angiogenesis and gene therapy in the SW480 subcutaneous xenograft model with favorable biosafety and biocompatibility during the treatment. Overall, FCNP was considered a promising strategy for the combined anti-angiogenesis-gene treatment against colorectal cancer.

Polymersome-based protein drug delivery - quo vadis?

Protein-based therapeutics are an attractive alternative to established therapeutic approaches and represent one of the fastest growing families of drugs. While many of these proteins can be delivered using established formulations, the intrinsic sensitivity of proteins to denaturation sometimes calls for a protective carrier to allow administration. Historically, lipid-based self-assembled structures, notably liposomes, have performed this function. After the discovery of polymersome-based targeted drug-delivery systems, which offer manifold advantages over lipid-based structures, the scientific community expected that such systems would take the therapeutic world by storm. However, no polymersome formulations have been commercialised. In this review article, we discuss key obstacles for the sluggish translation of polymersome-based protein nanocarriers into approved pharmaceuticals, which include limitations imparted by the use of non-degradable polymers, the intricacies of polymersome production methods, and the complexity of the in vivo journey of polymersomes across various biological barriers. Considering this complex subject from a polymer chemist's point of view, we highlight key areas that are worthy to explore in order to advance polymersomes to a level at which clinical trials become worthwhile and translation into pharmaceutical and nanomedical applications is realistic.

Targeting of phagolysosomes containing conidia of the fungus Aspergillus fumigatus with polymeric particles

Conidia of the airborne human-pathogenic fungus Aspergillus fumigatus are inhaled by humans. In the lung, they are phagocytosed by alveolar macrophages and intracellularly processed. In macrophages, however, conidia can interfere with the maturation of phagolysosomes to avoid their elimination. To investigate whether polymeric particles (PPs) can reach this intracellular pathogen in macrophages, we formulated dye-labeled PPs with a size allowing for their phagocytosis. PPs were efficiently taken up by RAW 264.7 macrophages and were found in phagolysosomes. When macrophages were infected with conidia prior to the addition of PPs, we found that they co-localized in the same phagolysosomes. Mechanistically, the fusion of phagolysosomes containing PPs with phagolysosomes containing conidia was observed. Increasing concentrations of PPs increased fusion events, resulting in 14% of phagolysosomes containing both conidia and PPs. We demonstrate that PPs can reach conidia-containing phagolysosomes, making these particles a promising carrier system for antimicrobial drugs to target intracellular pathogens. KEY POINTS: • Polymer particles of a size larger than 500 nm are internalized by macrophages and localized in phagolysosomes. • These particles can be delivered to Aspergillus fumigatus conidia-containing phagolysosomes of macrophages. • Enhanced phagolysosome fusion by the use of vacuolin1 can increase particle delivery.

Cationic biopolymer decorated Asiatic Acid and Centella asiatica extract incorporated liposomes for treating early-stage Alzheimer's disease: An In-vitro and In-vivo investigation

Background: Asiatic acid (AA) is a naturally occurring triterpenoid derivative of Centella asiatica (CA) with neuroprotective effect. The study aimed to design an ideal oral drug delivery system to treat Alzheimer's disease (AD) and develop chitosan-embedded liposomes comprising an extract of CA (CLCAE) and compare them with the chitosan-coated liposomes of asiatic acid (CLAA) for oral delivery to treat the initial phases of AD.  Methods: The solvent evaporation technique was used to develop CLCAE and CLAA, optimised with the experiment's design, and was further evaluated. Results: Nuclear magnetic resonance (NMR) studies confirmed coating with chitosan. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) indicated the successful formation of CLCAE and CLAA. Differential scanning colorimetry (DSC) confirmed the drug-phospholipid complex. Furthermore, the rate of  in vitro release of CLCAE and CLAA was found to be 69.43±0.3 % and 85.3±0.3 %, respectively, in 24 h.  Ex vivo permeation of CLCAE and CLAA was found to be 48±0.3 % and 78±0.3 %, respectively. In the Alcl3-induced AD model in rats, disease progression was confirmed by Y-maze, the preliminary histopathology evaluation showed significantly higher efficacy of the prepared liposomes (CLCAE and CLAA) compared to the Centella asiatica extract (CAE) and they were found to have equivalent efficacy to the standard drug (rivastigmine tartrate). The considerable increase in pharmacodynamic parameters in terms of neuronal count in the CLAA group indicated the protective role against Alcl3 toxicity and was also confirmed by assessing acetylcholine (Ach) levels. The pharmacokinetic study, such as C _max, T _max, and area under curve (AUC) parameters, proved an increase in AA bioavailability in the form of CLAA compared to the pure AA and CLCAE forms. Conclusion: The preclinical study suggested that CLAA was found to have better stability and an ideal oral drug delivery system to treat AD.

Exploring Various Techniques for the Chemical and Biological Synthesis of Polymeric Nanoparticles

Nanoparticles (NPs) have remarkable properties for delivering therapeutic drugs to the body's targeted cells. NPs have shown to be significantly more efficient as drug delivery carriers than micron-sized particles, which are quickly eliminated by the immune system. Biopolymer-based polymeric nanoparticles (PNPs) are colloidal systems composed of either natural or synthetic polymers and can be synthesized by the direct polymerization of monomers (e.g., emulsion polymerization, surfactant-free emulsion polymerization, mini-emulsion polymerization, micro-emulsion polymerization, and microbial polymerization) or by the dispersion of preformed polymers (e.g., nanoprecipitation, emulsification solvent evaporation, emulsification solvent diffusion, and salting-out). The desired characteristics of NPs and their target applications are determining factors in the choice of method used for their production. This review article aims to shed light on the different methods employed for the production of PNPs and to discuss the effect of experimental parameters on the physicochemical properties of PNPs. Thus, this review highlights specific properties of PNPs that can be tailored to be employed as drug carriers, especially in hospitals for point-of-care diagnostics for targeted therapies.

R, Trevino De Leo C, Lopez SA, Martirosyan KS, Chew SA. Application of iron oxide nanoparticles to control the release of minocycline for the treatment of glioblastoma

Background: The utilization of iron oxide nanoparticles (Fe3O4 NPs) to control minocycline release rates from poly(lactic-co-glycolic acid) scaffolds fabricated from an easy/economical technique is presented. Results & methodology: A larger change in temperature and amount of minocycline released was observed for scaffolds with higher amounts of Fe3O4 NPs, demonstrating that nanoparticle concentration can control heat generation and minocycline release. Temperatures near a polymer's glass transition temperature can result in the polymer's chain becoming more mobile and thus increasing drug diffusion out of the scaffold. Elevated temperature and minocycline released from the scaffold can work synergistically to enhance glioblastoma cell death. Conclusion: This study suggests that Fe3O4 NPs are promising materials for controlling minocycline release from polymeric scaffolds by magnetic hyperthermia for the treatment of glioblastoma.

Conformable hierarchically engineered polymeric micromeshes enabling combinatorial therapies in brain tumours

The poor transport of molecular and nanoscale agents through the blood-brain barrier together with tumour heterogeneity contribute to the dismal prognosis in patients with glioblastoma multiforme. Here, a biodegradable implant (μMESH) is engineered in the form of a micrometre-sized poly(lactic-co-glycolic acid) mesh laid over a water-soluble poly(vinyl alcohol) layer. Upon poly(vinyl alcohol) dissolution, the flexible poly(lactic-co-glycolic acid) mesh conforms to the resected tumour cavity as docetaxel-loaded nanomedicines and diclofenac molecules are continuously and directly released into the adjacent tumour bed. In orthotopic brain cancer models, generated with a conventional, reference cell line and patient-derived cells, a single μMESH application, carrying 0.75 mg kg^-1 of docetaxel and diclofenac, abrogates disease recurrence up to eight months after tumour resection, with no appreciable adverse effects. Without tumour resection, the μMESH increases the median overall survival (∼30 d) as compared with the one-time intracranial deposition of docetaxel-loaded nanomedicines (15 d) or 10 cycles of systemically administered temozolomide (12 d). The μMESH modular structure, for the independent coloading of different molecules and nanomedicines, together with its mechanical flexibility, can be exploited to treat a variety of cancers, realizing patient-specific dosing and interventions.

PLGA-based nanomedicines manufacturing: Technologies overview and challenges in industrial scale-up

Nanomedicines based on poly(lactic-co-glycolic acid) (PLGA) carriers offer tremendous opportunities for biomedical research. Although several PLGA-based systems have already been approved by both the Food and Drug Administration (FDA) and the European Medicine Agency (EMA), and are widely used in the clinics for the treatment or diagnosis of diseases, no PLGA nanomedicine formulation is currently available on the global market. One of the most impeding barriers is the development of a manufacturing technique that allows for the transfer of nanomedicine production from the laboratory to an industrial scale with proper characterization and quality control methods. This review provides a comprehensive overview of the technologies currently available for the manufacturing and analysis of polymeric nanomedicines based on PLGA nanoparticles, the scale-up challenges that hinder their industrial applicability, and the issues associated with their successful translation into clinical practice.

A Perspective on Polylactic Acid-Based Polymers Use for Nanoparticles Synthesis and Applications

Polylactic acid (PLA)-based polymers are ubiquitous in the biomedical field thanks to their combination of attractive peculiarities: biocompatibility (degradation products do not elicit critical responses and are easily metabolized by the body), hydrolytic degradation in situ, tailorable properties, and well-established processing technologies. This led to the development of several applications, such as bone fixation screws, bioresorbable suture threads, and stent coating, just to name a few. Nanomedicine could not be unconcerned by PLA-based materials as well, where their use for the synthesis of nanocarriers for the targeted delivery of hydrophobic drugs emerged as a new promising application. The purpose of the here presented review is two-fold: on one side, it aims at providing a broad overview of PLA-based materials and their properties, which allow them gaining a leading role in the biomedical field; on the other side, it offers a specific focus on their recent use in nanomedicine, highlighting opportunities and perspectives.

Injectable PNIPAM/Hyaluronic acid hydrogels containing multipurpose modified particles for cartilage tissue engineering: Synthesis, characterization, drug release and cell culture study

Novel injectable thermosensitive PNIPAM/hyaluronic acid hydrogels containing various amounts of chitosan-g-acrylic acid coated PLGA (ACH-PLGA) micro/nanoparticles were synthesized and designed to facilitate the regeneration of cartilage tissue. The ACH-PLGA particles were used in the hydrogels to play a triple role: first, the allyl groups on the chitosan-g-acrylic acid shell act as crosslinkers for PNIPAM and improved the mechanical properties of the hydrogel to mimic the natural cartilage tissue. Second, PLGA core acts as a carrier for the controlled release of chondrogenic small molecule melatonin. Third, they could reduce the syneresis of the thermosensitive hydrogel during gelation. The optimum hydrogel with the minimum syneresis and the maximum compression modulus was chosen for further evaluations. This hydrogel showed a great integration with the natural cartilage during the adhesion test, and also, presented an interconnected porous structure in scanning electron microscopy images. Eventually, to evaluate the cytotoxicity, mesenchymal stem cells were encapsulated inside the hydrogel. MTT and Live/Dead assay showed that the hydrogel improved the cells growth and proliferation as compared to the tissue culture polystyrene. Histological study of glycosaminoglycan (GAG) showed that melatonin treatment has the ability to increase the GAG synthesis. Overall, due to the improved mechanical properties, low syneresis, the ability of sustained drug release and also high bioactivity, this injectable hydrogel is a promising material system for cartilage tissue engineering.

Sustained Release of Vascular Endothelial Growth Factor from Poly(ε-caprolactone-PEG-ε-caprolactone)-b-Poly(l-lactide) Multiblock Copolymer Microspheres

Vascular endothelial growth factor (VEGF) is the major regulating factor for the formation of new blood vessels, also known as angiogenesis. VEGF is often incorporated in synthetic scaffolds to promote vascularization and to enhance the survival of cells that have been seeded in these devices. Such applications require sustained local delivery of VEGF of around 4 weeks for stable blood vessel formation. Most delivery systems for VEGF only provide short-term release for a couple of days, followed by a release phase with very low VEGF release. We now have developed VEGF-loaded polymeric microspheres that provide sustained release of bioactive VEGF for 4 weeks. Blends of two swellable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone)-b-poly(l-lactide) ([PCL-PEG-PCL]-b-[PLLA])-based multiblock copolymers with different PEG content and PEG molecular weight were used to prepare the microspheres. Loading of the microspheres was established by a solvent evaporation-based membrane emulsification method. The resulting VEGF-loaded microspheres had average sizes of 40-50 μm and a narrow size distribution. Optimized formulations of a 50:50 blend of the two multiblock copolymers had an average VEGF loading of 0.79 ± 0.09%, representing a high average VEGF loading efficiency of 78 ± 16%. These microspheres released VEGF continuously over 4 weeks in phosphate-buffered saline pH 7.4 at 37 °C. This release profile was preserved after repeated and long-term storage at -20 °C for up to 9 months, thereby demonstrating excellent storage stability. VEGF release was governed by diffusion through the water-filled polymer matrix, depending on PEG molecular weight and PEG content of the polymers. The bioactivity of the released VEGF was retained within the experimental error in the 4-week release window, as demonstrated using a human umbilical vein endothelial cells proliferation assay. Thus, the microspheres prepared in this study are suitable for embedment in polymeric scaffolds with the aim of promoting their functional vascularization.

Pharmaceutical feasibility and flow characteristics of polymeric non-spherical particles

Last decade has seen emergence of particle shape as a critical design parameter to overcome several long standing problems associated with particulate drug delivery- non-specific drug effects, RES uptake, poor bioavailability, achieving controlled release profiles, predictable degradation profiles, longer circulation time and zero order release kinetics to name a few. Non-spherical particles have been synthesized by techniques ranging from classical solvent evaporation to specialized techniques like film stretching and PRINT®. Non-spherical particles tend to show a difference in macrophage uptake, adhesion to target cells and distribution in vivo. This review also discusses these effects and its implications. Lastly, the impact of particle aspect ratio and other shape-governed parameters on flow properties, dispersion viscosities and other pharmaceutically relevant aspects have been briefly explained. Although there are no thumb rules yet, modern and classical literature on behavior of non-spherical particles has been reviewed and the observations have been trend-lined.

Förster Resonance Energy Transfer-Based Stability Assessment of PLGA Nanoparticles in Vitro and in Vivo

The knowledge of in vitro and in vivo stability of polymeric nanoparticles is vital for the development of clinical formulations for drug delivery and cell labeling applications. Förster resonance energy transfer (FRET)-based fluorescence labeling approaches are promising tools to study nanoparticle stability under different physiological conditions. Here, we present the FRET-based stability assessment of poly(lactic-co-glycolic acid) (PLGA) nanoparticles encapsulating BODIPY-FL12 and Nile Red as the donor and acceptor, respectively. The stability of PLGA nanoparticles is studied via monitoring the variations of fluorescence emission characteristics along with colloidal characterization. Accordingly, PLGA nanoparticles are colloidally stable for more than 2 weeks when incubated in aqueous buffers in situ, whereas in vitro particle degradation starts in between 24 and 48 h, reaching a complete loss of FRET at 72 h as shown with fluorescence microscopy imaging and flow cytometry analysis. PLGA nanoparticles systemically administered to mice predominantly accumulate in the liver, in which FRET no longer takes place at time points as early as 24 h postadministration as determined by ex vivo organ imaging and flow cytometry analysis. The results of this study expand our knowledge on drug release and degradation behavior of PLGA nanoparticles under different physiological conditions, which will prove useful for the rational design of PLGA-based formulations for various applications that can be translated into clinical practice.

Active, Autonomous, and Adaptive Polymeric Particles for Biomedical Applications

Nature's motors are complex and efficient systems, which are able to respond to many different stimuli present in the cell. Nanomotors for biomedical applications are designed to mimic nature's complexity; however, they usually lack biocompatibility and the ability to adapt to their environment. Polymeric vesicles can overcome these problems due to the soft and flexible nature of polymers. Herein we will highlight the recent progress and the crucial steps needed to fabricate active and adaptive motor systems for their use in biomedical applications and our approach to reach this goal. This includes the formation of active, asymmetric vesicles and the incorporation of a catalyst, together with their potential in biological applications and the challenges still to overcome.

Natural biodegradable polymers based nano-formulations for drug delivery: A review

Nanomedicines are now considered as the new-generation medication in the current era mainly because of their features related to nano size. The efficacy of many drugs in their micro/macro formulations is shown to have poor bioavailability and pharmacokinetics after oral administration. To overcome this predicament, use of natural/synthetic biodegradable polymeric nanoparticles (NPs) have gained prominence in the field of nanomedicine for targeted drug delivery to improve biocompatibility, bioavailability, safety, enhanced permeability, better retention time and lower toxicity. For drug delivery, it is essential to have biodegradable nanoparticle formulations for safe and efficient transport and release of drug at the intended site. Moreover, depending on the target organ, a suitable biodegradable polymer can be selected as the drug-carrier for target specific as well as for sustained drug delivery. The aim of this review is to present the current status and scope of natural biodegradable polymers as well as some emerging polymers with special characteristics as suitable carriers for drug delivery applications. The most widely preferred preparation methods are discussed along with their characterization using different analytical techniques. Further, the review highlights significant features of methods developed using natural polymers for drug entrapment and release studies.

Formulation and Pharmacokinetics of HSA-core and PLGA-shell Nanoparticles for Delivering Gemcitabine

Gemcitabine-loaded core-shell nanoparticles (CSNPs), comprised of a cross-linked HSA-core and PLGA-shell, were prepared through a modified double emulsification method, and the processing parameters were systematically investigated. The optimized CSNPs had a particle size of 241 ± 36.2 nm and an encapsulation efficiency of 41.52%. The core-shell structure was characterized by optical microscope (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The amorphous nature of the encapsulated drug was confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). An in vitro release study demonstrated that the CSNPs had an improved sustained release profile controlled by erosion of materials in combination with drug diffusion. In vivo pharmacokinetics of CSNPs obtained a bigger area under concentration-time curve (AUC), t _1/2, and C _max compared to free drug solution. The results suggest that HSA-PLGA-based CSNPs can be a promising carrier for the sustained release of gemcitabine.

Relationship between polarities of antibiotic and polymer matrix on nanoparticle formulations based on aliphatic polyesters

In the field of nanomedicine, nanoparticles are developed to target antibiotics to sites of bacterial infection thus enabling adequate drug exposure and decrease development of resistant bacteria. In the present study, we investigated the encapsulation of two antibiotics with different polarity into different PEGylated polymeric nanoparticles based on aliphatic polyesters, to obtain a better understanding of critical factors determining encapsulation and release. The nanoparticles were prepared from diblock copolymers comprising of a poly(ethylene glycol) block attached to an aliphatic polyester block of varying polarity: poly(lactic-co-glycolic acid) (mPEG-PLGA), poly(lactic-co-hydroxymethyl glycolic acid) (mPEG-PLHMGA) and poly(lactic-co-benzyloxymethyl glycolic acid) (mPEG-PLBMGA). Hydrophobic bedaquiline and hydrophilic vancomycin were encapsulated via single and double-emulsion solvent evaporation techniques, respectively. Encapsulation, degradation and release studies at physiological simulating conditions were performed. Drug polarity and preparation techniques influenced encapsulation efficiency into polymer nanoparticles, giving almost complete encapsulation of bedaquiline and approx. 30% for vancomycin independent of the polymer type. The nonpolar bedaquiline showed a predominantly diffusion-controlled release independent of polymer composition. However, polar vancomycin was released by a combination of diffusion and polymer degradation, which was significantly affected by polymer composition, the most hydrophilic polymer displaying the fastest release.

Mechanical properties and state of miscibility in poly(racD,L-lactide-co-glycolide)/(L-lactide-co-ε-caprolactone) blends

Polymers based on lactic acid (PLA) are a very promising category of biopolymers. As they are multi-stimuli responsive, can, in many ways, positively interact with the host, stimulating the innate reparative machinery of the human body. Since biopolymers for medical applications are subject to restrictive regulations, blending stands out as an effective method for obtaining tailored properties within a reduced time to market if compared to synthesis. Hence, in this study a set of PDLGA/PLCL blends was obtained by means of thermoplastic techniques and then further characterized. Evaluation techniques include GPC, NMR, DSC, tensile testing and SEM. Although mixtures proved to be immiscible, a full range of tensile properties was achieved. Observation of the surfaces of fracture provided visual evidence of the deformation mechanisms that occurred during the tensile tests which in the end led to failure. Interpretation of the thermal events based on molecular characterization parameters revealed phase separation, crystallization and plasticisation mechanisms that are relevant to any potential applications based on mechanical performance and shape memory behaviour.

Degradation, intra-articular retention and biocompatibility of monospheres composed of [PDLLA-PEG-PDLLA]-b-PLLA multi-block copolymers

In this study, we investigated the use of microspheres with a narrow particle size distribution ('monospheres') composed of biodegradable poly(DL-lactide)-PEG-poly(DL-lactide)-b-poly(L-lactide) multiblock copolymers that are potentially suitable for local sustained drug release in articular joints. Monospheres with sizes of 5, 15 and 30μm and a narrow particle size distribution were prepared by a micro-sieve membrane emulsification process. During in vitro degradation, less crystallinity, higher swelling and accelerated mass loss during was observed with increasing the PEG content of the polymer. The monospheres were tested in both a small (mice/rat) and large animal model (horse). In vivo imaging after injection with fluorescent dye loaded microspheres in mice knees showed that monospheres of all sizes retained within the joint for at least 90days, while the same dose of free dye redistributed to the whole body within the first day after intra-articular injection. Administration of monospheres in equine carpal joints caused a mild transient inflammatory response without any clinical signs and without degradation of the cartilage, as evidenced by the absence of degradation products of sulfated glycosaminoglycans or collagen type 2 in the synovial fluid. The excellent intra-articular biocompatibility was confirmed in rat knees, where μCT-imaging and histology showed neither changes in cartilage quality nor quantity. Given the good intra-articular retention and the excellent biocompatibility, these novel poly(DL-lactide)-PEG-poly(DL-lactide)-b-poly(L-lactide)-based monospheres can be considered a suitable platform for intra-articular drug delivery.

STATEMENT OF SIGNIFICANCE

This paper demonstrates the great potential in intra-articular drug delivery of monodisperse biodegradable microspheres which were prepared using a new class of biodegradable multi-block copolymers and a unique membrane emulsification process allowing the preparation of microspheres with a narrow particle size distribution (monospheres) leading to multiple advantages like better injectability, enhanced reproducibility and predictability of the in vivo release kinetics. We report not only on the synthesis and preparation, but also in vitro characterization, followed by in vivo testing of intra-articular biocompatibility of the monospheres in both a small and a large animal model. The favourable intra-articular biocompatibility combined with the prolonged intra-articular retention (>90days) makes these monospheres an interesting drug delivery platform. What should also be highlighted is the use of horses; a very accurate translational model for the human situation, making the results not only relevant for equine healthcare, but also for the development of novel human OA therapies.

Bright, near infrared emitting PLGA–PEG dye-doped CN-PPV nanoparticles for imaging applications

In this publication, we describe the synthesis of near-IR emitting conjugated polymer nanoparticles with an engineered surface, and their use in biological imaging.

Manufacturing Techniques and Surface Engineering of Polymer Based Nanoparticles for Targeted Drug Delivery to Cancer

The evolution of polymer based nanoparticles as a drug delivery carrier via pharmaceutical nano/microencapsulation has greatly promoted the development of nano- and micro-medicine in the past few decades. Poly(lactide-co-glycolide) (PLGA) and chitosan, which are biodegradable and biocompatible polymers, have been approved by both the Food & Drug Administration (FDA) and European Medicine Agency (EMA), making them ideal biomaterials that can be advanced from laboratory development to clinical oral and parental administrations. PLGA and chitosan encapsulated nanoparticles (NPs) have successfully been developed as new oral drug delivery systems with demonstrated high efficacy. This review aims to provide a comprehensive overview of the fabrication of PLGA and chitosan particulate systems using nano/microencapsulation methods, the current progress and the future outlooks of the nanoparticulate drug delivery systems. Especially, we focus on the formulations and nano/micro-encapsulation techniques using top-down techniques. It also addresses how the different phases including the organic and aqueous ones in the emulsion system interact with each other and subsequently influence the properties of the drug delivery system. Besides, surface modification strategies which can effectively engineer intrinsic physicochemical properties are summarised. Finally, future perspectives and potential directions of PLGA and chitosan nano/microencapsulated drug systems are outlined.

Cellular uptake and intracellular degradation of poly(alkyl cyanoacrylate) nanoparticles

Background

Poly(alkyl cyanoacrylate) (PACA) nanoparticles have shown promise as drug carriers both to solid tumors and across the blood–brain barrier. Efficient drug delivery requires both high cellular uptake of the nanoparticles and release of the drug from the nanoparticles. Release of hydrophobic drugs from PACA nanoparticles is primarily governed by nanoparticle degradation, and this process has been poorly studied at the cellular level. Here we use the hydrophobic model drug Nile Red 668 (NR668) to investigate intracellular degradation of PACA nanoparticles by measuring changes in NR668 fluorescence emission and lifetime, as the spectral properties of NR668 depend on the hydrophobicity of the dye environment. We also assess the potential of poly(butyl cyanoacrylate) (PBCA) and poly(octyl cyanoacrylate) (POCA) nanoparticles for intracellular drug delivery in the prostate cancer cell line PC3 and rat brain endothelial cell line RBE4 and the role of endocytosis pathways in PACA nanoparticle uptake in those cell lines.

Results

Fluorescence lifetime imaging, emission spectra analysis and Förster resonance energy transfer indicated that the intracellular degradation was in line with the degradation found by direct methods such as gas chromatography and scanning electron microscopy, showing that PBCA has a faster degradation rate compared to POCA. The combined P(BCA/OCA) nanoparticles had an intermediate degradation rate. The uptake of POCA and PBCA nanoparticles was much higher in RBE4 than in PC3 cells. Endocytosis inhibition studies showed that both clathrin- and caveolin-mediated endocytosis were involved in PACA nanoparticle uptake, and that the former played a predominant role, particularly in PC3 cells.

Conclusions

In the present study, we used three different optical techniques to show that within a 24-hour period PBCA nanoparticles degraded significantly inside cells, releasing their payload into the cytosol, while POCA nanoparticles remained intact. This indicates that it is possible to tune the intracellular drug release rate by choosing appropriate monomers from the PACA family or by using hybrid PACA nanoparticles containing different monomers. In addition, we showed that the uptake of PACA nanoparticles depends not only on the monomer material, but also on the cell type, and that different cell lines can use different internalization pathways.

Electronic supplementary material

The online version of this article (doi:10.1186/s12951-015-0156-7) contains supplementary material, which is available to authorized users.

Spatiotemporal release of BMP-2 and VEGF enhances osteogenic and vasculogenic differentiation of human mesenchymal stem cells and endothelial colony-forming cells co-encapsulated in a patterned hydrogel

Reconstruction of large bone defects is limited by insufficient vascularization and slow bone regeneration. The objective of this work was to investigate the effect of spatial and temporal release of recombinant human bone morphogenetic protein-2 (BMP2) and vascular endothelial growth factor (VEGF) on the extent of osteogenic and vasculogenic differentiation of human mesenchymal stem cells (hMSCs) and endothelial colony-forming cells (ECFCs) encapsulated in a patterned hydrogel. Nanogels (NGs) based on polyethylene glycol (PEG) macromers chain-extended with short lactide (L) and glycolide (G) segments were used for grafting and timed-release of BMP2 and VEGF. NGs with 12kDa PEG molecular weight (MW), 24 LG segment length, and 60/40L/G ratio (P12-II, NG(10)) released the grafted VEGF in 10days. NGs with 8kDa PEG MW, 26 LG segment length, and 60/40L/G ratio (P8-I, NG(21)) released the grafted BMP2 in 21days. hMSCs and NG-BMP2 were encapsulated in a patterned matrix based on acrylate-functionalized lactide-chain-extended star polyethylene glycol (SPELA) hydrogel and microchannel patterns filled with a suspension of hMSCs+ECFCs and NG-VEGF in a crosslinked gelatin methacryloyl (GelMA) hydrogel. Groups included patterned constructs without BMP2/VEGF (None), with directly added BMP2/VEGF, and NG-BMP2/NG-VEGF. Based on the results, timed-release of VEGF in the microchannels in 10days from NG(10) and BMP2 in the matrix in 21days from NG(21) resulted in highest extent of osteogenic and vasculogenic differentiation of the encapsulated hMSCs and ECFCs compared to direct addition of VEGF and BMP2. Further, timed-release of VEGF from NG(10) in hMSC+ECFC encapsulating microchannels and BMP2 from NG(21) in hMSC encapsulating matrix sharply increased bFGF expression in the patterned constructs. The results suggest that mineralization and vascularization are coupled by localized secretion of paracrine signaling factors by the differentiating hMSCs and ECFCs.

A new magnetic resonance imaging contrast agent loaded into poly(lacide-co-glycolide) nanoparticles for long-term detection of tumors

The incorporation of a lipophilic Gd chelate (GdDO3A-C12) in biocompatible PLGA poly(D, L-lactide-co-glycolide) nanoparticles was explored as an approach to increase the relaxivity of contrast agents for magnetic resonance imaging. By nanoprecipitation, it was possible to obtain PEGylated gadolinium nanoparticles (mean diameter of 155 nm) with high Gd loading (1.1 × 10(4) Gd centers per nanoparticle). The corresponding GdDO3AC12 ⊂ NPs nanoparticles exhibited an enhanced relaxivity (up to sixfold greater than DOTAREM® at 40 MHz) because the nanoparticle framework constrained the lipophilic Gd chelate motion and favorably impacted the Gd chelate rotational correlation time. T1-weighted imaging at 3 T on phantoms showed enhanced contrast for the GdDO3AC12 ⊂ NPs. Importantly, Gd chelate leakage was almost nonexistent, which suggested that these GdDO3AC12 ⊂ NPs could be useful for long-term MRI detection.

Effects of l-lactide and d,l-lactide in poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) on the bulk states of triblock copolymers, and their thermogellation and biodegradation in water

In this study, the effects of l-lactide and d,l-lactide on the thermogelling and biodegradation behaviors of PLGA-PEG-PLGA copolymers were revealed.

NIR-light active hybrid nanoparticles for combined imaging and bimodal therapy of cancerous cells

Multifunctional hybrid polymeric-based nanoplatforms for simultaneous fluorescence and magnetic resonance imaging and multimodal chemo- and phothermal therapies.