Ketoprofen controlled release from composite microcapsules for cell encapsulation: Effect on post-transplant acute inflammation

Hydrogel-Encapsulated Pancreatic Islet Cells as a Promising Strategy for Diabetic Cell Therapy

Islet transplantation has now become a promising treatment for insulin-deficient diabetes mellitus. Compared to traditional diabetes treatments, cell therapy can restore endogenous insulin supplementation, but its large-scale clinical application is impeded by donor shortages, immune rejection, and unsuitable transplantation sites. To overcome these challenges, an increasing number of studies have attempted to transplant hydrogel-encapsulated islet cells to treat diabetes. This review mainly focuses on the strategy of hydrogel-encapsulated pancreatic islet cells for diabetic cell therapy, including different cell sources encapsulated in hydrogels, encapsulation methods, hydrogel types, and a series of accessorial manners to improve transplantation outcomes. In addition, the formation and application challenges as well as prospects are also presented.

Species-dependent impact of immunosuppressive squalene-gusperimus nanoparticles and adipose-derived stem cells on isolated human and rat pancreatic islets

Transplantation of pancreatic islets is a promising approach to controlling glucose levels in type 1 diabetes mellitus (T1DM), but islet survival is still limited. To overcome this, islet co-culture with mesenchymal stromal cells (MSCs) together with safe immunosuppressive agents like squalene-gusperimus nanoparticles (Sq-GusNPs) may be applied. This could support islet survival and engraftment. Here, we studied how Sq-GusNPs and adipose-derived stem cells (ASCs) influence islets response under pro-inflammatory conditions. Through qRT-PCR, we studied the expression of specific genes at 24 hours in human and rat islets and ASCs in co-culture under indirect contact with or without treatment with Sq-GusNPs. We characterized how the response of islets and ASCs starts at molecular level before impaired viability or function is observed and how this response differs between species. Human islets and ASCs responses showed to be principally influenced by NF-κB activation, whereas rat islet and ASCs responses showed to be principally mediated by nitrosative stress. Rat islets showed tolerance to inflammatory conditions due to IL-1Ra secretion which was also observed in rat ASCs. Human islets induced the expression of cytokines and chemokines with pro-angiogenic, tissue repair, and anti-apoptotic properties in human ASCs under basal conditions. This expression was not inhibited by Sq-GusNPs. Our results showed a clear difference in the response elicited by human and rat islets and ASCs in front of an inflammatory stimulus and Sq-GusNPs. Our data support the use of ASCs and Sq-GusNP to facilitate engraftment of islets for T1DM treatment.

Immune-Protective Formulations and Process Strategies for Improved Survival and Function of Transplanted Islets

Type 1 diabetes (T1D) is an autoimmune disease caused by the immune system attacking and destroying insulin-producing β cells in the pancreas. Islet transplantation is becoming one of the most promising therapies for T1D patients. However, its clinical use is limited by substantial cell loss after islet infusion, closely related to immune reactions, including instant blood-mediated inflammatory responses, oxidative stress, and direct autoimmune attack. Especially the grafted islets are not only exposed to allogeneic immune rejection after transplantation but are also subjected to an autoimmune process that caused the original disease. Due to the development and convergence of expertise in biomaterials, nanotechnology, and immunology, protective strategies are being investigated to address this issue, including exploring novel immune protective agents, encapsulating islets with biomaterials, and searching for alternative implantation sites, or co-transplantation with functional cells. These methods have significantly increased the survival rate and function of the transplanted islets. However, most studies are still limited to animal experiments and need further studies. In this review, we introduced the immunological challenges for islet graft and summarized the recent developments in immune-protective strategies to improve the outcomes of islet transplantation.

Sulfated Alginate Reduces Pericapsular Fibrotic Overgrowth on Encapsulated cGMP-Compliant hPSC-Hepatocytes in Mice

Intra-peritoneal placement of alginate encapsulated human induced pluripotent stem cell-derived hepatocytes (hPSC-Heps) represents a potential new bridging therapy for acute liver failure. One of the rate-limiting steps that needs to be overcome to make such a procedure more efficacious and safer is to reduce the accumulation of fibrotic tissue around the encapsulated cells to allow the free passage of relevant molecules in and out for metabolism. Novel chemical compositions of alginate afford the possibility of achieving this aim. We accordingly used sulfated alginate and demonstrated that this material reduced fibrotic overgrowth whilst not impeding the process of encapsulation nor cell function. Cumulatively, this suggests sulfated alginate could be a more suitable material to encapsulate hPSC-hepatocyte prior to human use.

Aqueous core microcapsules as potential long-acting release systems for hydrophilic drugs

We have previously optimized the internal phase separation process to give rise to aqueous core microcapsules with polymeric shells composed of poly(lactide-co-glycolide) (PLGA) or poly(lactide) (PLA). In this study, the ability of these microcapsules to act as controlled release platforms of the model hydrophilic drug phenobarbital sodium was tested. Furthermore, the effect of the initial amounts of drug and water added to the system during microcapsule synthesis was investigated. Finally, the effect of varying polymer properties such as end functionalities, molecular weights, and lactide to glycolide ratios, on the characteristics of the produced microcapsules was studied. This was done by utilizing seven different grades of the polyester polymers. It was demonstrated that, within certain limits, drug loading is nearly proportional to the initial amounts of drug and water. Furthermore, drug encapsulation studies demonstrated that ester termination and increases in polymeric molecular weight result in lower drug loading and encapsulation efficiency. Moreover, drug release studies demonstrated that ester termination, increases in molecular weight, and increases in the lactide to glycolide ratio all result in slower drug release; this grants the ability to tailor the drug release duration from a few days to several weeks. In conclusion, such minor variations in polymer characteristics and formulation composition can result in dramatic changes in the properties of the produced microcapsules. These changes can be fine-tuned to obtain desirable long-acting microcapsules capable of encapsulating a variety of hydrophilic drugs which can be used in a wide range of applications.

Cell microencapsulation technologies for sustained drug delivery: Latest advances in efficacy and biosafety

The development of cell microencapsulation systems began several decades ago. However, today few systems have been tested in clinical trials. For this reason, in the last years, researchers have directed efforts towards trying to solve some of the key aspects that still limit efficacy and biosafety, the two major criteria that must be satisfied to reach the clinical practice. Regarding the efficacy, which is closely related to biocompatibility, substantial improvements have been made, such as the purification or chemical modification of the alginates that normally form the microspheres. Each of the components that make up the microcapsules has been carefully selected to avoid toxicities that can damage the encapsulated cells or generate an immune response leading to pericapsular fibrosis. As for the biosafety, researchers have developed biological circuits capable of actively responding to the needs of the patients to precisely and accurately release the demanded drug dose. Furthermore, the structure of the devices has been subject of study to adequately protect the encapsulated cells and prevent their spread in the body. The objective of this review is to describe the latest advances made by scientist to improve the efficacy and biosafety of cell microencapsulation systems for sustained drug delivery, also highlighting those points that still need to be optimized.

Biomaterials for Personalized Cell Therapy

Cell therapy has already had an important impact on healthcare and provided new treatments for previously intractable diseases. Notable examples include mesenchymal stem cells for tissue regeneration, islet transplantation for diabetes treatment, and T cell delivery for cancer immunotherapy. Biomaterials have the potential to extend the therapeutic impact of cell therapies by serving as carriers that provide 3D organization and support cell viability and function. With the growing emphasis on personalized medicine, cell therapies hold great potential for their ability to sense and respond to the biology of an individual patient. These therapies can be further personalized through the use of patient-specific cells or with precision biomaterials to guide cellular activity in response to the needs of each patient. Here, the role of biomaterials for applications in tissue regeneration, therapeutic protein delivery, and cancer immunotherapy is reviewed, with a focus on progress in engineering material properties and functionalities for personalized cell therapies.

Polymerized laminin incorporation into alginate-based microcapsules reduces pericapsular overgrowth and inflammation

Cell encapsulation coats cells with an artificial membrane to preserve their physical and functional integrity. Different approaches try to develop more functional and biocompatible materials to avoid cell loss after transplantation due to inflammatory reaction, one of the main causes for graft failure. In this study, the LN-Biodritin biomaterial, based on alginate, chondroitin sulfate, and laminin, previously developed by our group, was further improved by replacing laminin by polylaminin, an artificial laminin polymer with anti-inflammatory properties, generating the new biomaterial polyLN-Biodritin. Capsules containing polylaminin are stable, do not induce macrophage activation in vitro, and are also able to prevent macrophage activation by encapsulated human pancreatic islets in vitro, preserving their glucose-stimulated insulin secretion potential. In addition, when empty capsules containing polylaminin were implanted into immunocompetent mice, the inflammatory response towards the implant was attenuated, when compared with capsules without polylaminin. The results indicate that polylaminin incorporation leads to lower levels of pericapsular growth on the capsules surface, lower infiltration of cells into the peritoneal cavity, and lower production of proinflammatory cytokines, both at the implant site (interleukin-12p70 (IL-12p70), tumor necrosis factor-α (TNF-α), monocyte chemotactic protein-1 (MCP-1), and interferon-γ (IFN-γ)) and systemically (IL-12p70 and TNF-α). Therefore, polylaminin incorporation into the microcapsules polymer attenuates the host posttransplantation immune response against implanted microcapsules, being likely to favor maintenance of engrafted encapsulated cells.

Long-term implant fibrosis prevention in rodents and non-human primates using crystallized drug formulations

Implantable medical devices have revolutionized modern medicine. However, immune-mediated foreign body response (FBR) to the materials of these devices can limit their function or even induce failure. Here we describe long-term controlled-release formulations for local anti-inflammatory release through the development of compact, solvent-free crystals. The compact lattice structure of these crystals allows for very slow, surface dissolution and high drug density. These formulations suppress FBR in both rodents and non-human primates for at least 1.3 years and 6 months, respectively. Formulations inhibited fibrosis across multiple implant sites-subcutaneous, intraperitoneal and intramuscular. In particular, incorporation of GW2580, a colony stimulating factor 1 receptor inhibitor, into a range of devices, including human islet microencapsulation systems, electrode-based continuous glucose-sensing monitors and muscle-stimulating devices, inhibits fibrosis, thereby allowing for extended function. We believe that local, long-term controlled release with the crystal formulations described here enhances and extends function in a range of medical devices and provides a generalized solution to the local immune response to implanted biomaterials.

Engineering immunomodulatory biomaterials for type 1 diabetes

A cure for type 1 diabetes (T1D) would help millions of people worldwide, but remains elusive thus far. Tolerogenic vaccines and beta cell replacement therapy are complementary therapies that seek to address aberrant T1D autoimmune attack and subsequent beta cell loss. However, both approaches require some form of systematic immunosuppression, imparting risks to the patient. Biomaterials-based tools enable localized and targeted immunomodulation, and biomaterial properties can be designed and combined with immunomodulatory agents to locally instruct specific immune responses. In this Review, we discuss immunomodulatory biomaterial platforms for the development of T1D tolerogenic vaccines and beta cell replacement devices. We investigate nano- and microparticles for the delivery of tolerogenic agents and autoantigens, and as artificial antigen presenting cells, and highlight how bulk biomaterials can be used to provide immune tolerance. We examine biomaterials for drug delivery and as immunoisolation devices for cell therapy and islet transplantation, and explore synergies with other fields for the development of new T1D treatment strategies.

Interconnected Toroidal Hydrogels for Islet Encapsulation

Islet encapsulation and transplantation promises to improve upon current treatments for type 1 diabetes mellitus, though several limitations remain. Macroscale devices have been designed for in vivo transplantation and retrieval, but traditional geometries do not support clinically adequate mass transfer of nutrients to and insulin from the encapsulated tissue. Microcapsule technologies have improved mass transfer properties, but their clinical translation remains challenging as their complete retrieval is difficult, should the graft become a safety concern. Here, the design, characterization and testing of a novel encapsulation structure, comprised of elastomer-reinforced interconnected toroidal hydrogels is reported. These donut-shaped hydrogels feature a high surface area, higher than conventional spherical capsules of the same volume, bestowing suitable mass transport conditions, while allowing interconnection and reversible deformation for intraperitoneal implantation and retrieval. Diabetes correction up to 12 weeks and complete retrieval is achieved in a diabetic mouse model, providing a proof-of-concept for the potential application as a type 1 diabetes cell replacement therapy.

Islet encapsulation

Review of emerging advances and persisting challenges in the engineering and translation of islet encapsulation technologies.

In Vitro-In Vivo Relationship of Amorphous Insoluble API (Progesterone) in PLGA Microspheres

PURPOSE

The mechanism of PRG release from PLGA microspheres was studied and the correlation of in vitro and in vivo analyses was assessed.

METHODS

PRG-loaded microspheres were prepared by the emulsion-evaporate method. The physical state of PRG and microstructure changings during the drug release period were evaluated by powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) respectively. Pharmacokinetic studies were performed in male Sprague-Dawley rats, and the in vivo-in vitro correlation (IVIVC) was established by linear fitting of the cumulative release (%) in vitro and fraction of absorption (%) in vivo.

RESULTS

PXRD results indicated recrystallization of PRG during release. The changes of microstructure of PRG-loaded microspheres during the release period could be observed in SEM micrographs. Pharmacokinetics results performed low burst-release followed a steady-released manner. The IVIVC assessment exhibited a good correlation between vitro and in vivo.

CONCLUSIONS

The burst release phase was caused by diffusion of amorphous PRG near the surface, while the second release stage was impacted by PRG-dissolution from crystal depots formed in microspheres. The IVIVC assessment suggests that the in vitro test method used in this study could predict the real situation in vivo and is helpful to study the release mechanism in vivo.

Encapsulated Islet Transplantation: Where Do We Stand?

Transplantation of pancreatic islets encapsulated within immuno-protective microcapsules is a strategy that has the potential to overcome graft rejection without the need for toxic immunosuppressive medication. However, despite promising preclinical studies, clinical trials using encapsulated islets have lacked long-term efficacy, and although generally considered clinically safe, have not been encouraging overall. One of the major factors limiting the long-term function of encapsulated islets is the host's immunological reaction to the transplanted graft which is often manifested as pericapsular fibrotic overgrowth (PFO). PFO forms a barrier on the capsule surface that prevents the ingress of oxygen and nutrients leading to islet cell starvation, hypoxia and death. The mechanism of PFO formation is still not elucidated fully and studies using a pig model have tried to understand the host immune response to empty alginate microcapsules. In this review, the varied strategies to overcome or reduce PFO are discussed, including alginate purification, altering microcapsule geometry, modifying alginate chemical composition, co-encapsulation with immunomodulatory cells, administration of pharmacological agents, and alternative transplantation sites. Nanoencapsulation technologies, such as conformal and layer-by-layer coating technologies, as well as nanofiber, thin-film nanoporous devices, and silicone based NanoGland devices are also addressed. Finally, this review outlines recent progress in imaging technologies to track encapsulated cells, as well as promising perspectives concerning the production of insulin-producing cells from stem cells for encapsulation.

Sequential Release of Multiple Drugs from Flexible Drug Delivery Films

Sequential release of drugs aligned with the phases of tissue healing could reduce scarring. To achieve this aim, layered film devices comprising cellulose acetate phthalate (CAP) and Pluronic F-127 (Pluronic) were loaded with ketoprofen, quercetin, and pirfenidone. Citrate plasticizers were added to impart flexibility. Release of two or three drugs in sequence over several days was obtained for all multilayered devices tested. Mechanical analysis showed that elongation increased and modulus decreased with increasing plasticizer content. Release profiles can be tailored by order of layers, plasticizer concentration, and drug loaded, making CAP-Pluronic an appealing system for inhibiting scar tissue formation.

Fabrication and characterization of microspheres encapsulating astrocytes for neural regeneration

Astrocytes play a critical role in supporting the normal physiological function of neurons. Recent studies have revealed that astrocyte transplantation can promote axonal regeneration and functional recovery after spinal cord injury. Biomaterial can be designed as a growth-permissive substrate and serve as a carrier for astrocyte transplantation into injured spinal cord. In this study, we developed a method to generate collagen microspheres encapsulating astrocytes by injecting a mixture of collagen and astrocytes into a cell culture medium with a syringe controlled by a syringe pump. The collagen microspheres were crosslinked with poly(ethylene glycol) ether tetrasuccinimidyl glutarate (4S-StarPEG) to reduce the degradation rate. The viability of cells in the crosslinked microspheres was higher than 90%. Astrocytes were transfected with plasmids encoding nerve growth factor (NGF)-ires-enhanced green fluorescent protein (EGFP) genes by electroporation and encapsulated in crosslinked microspheres. The level of NGF released into the cell culture medium was higher than that remaining in the microspheres or astrocytes. When microspheres encapsulating astrocytes transfected with plasmids encoding NGF-ires-EGFP genes were added into the cultured rat dorsal root ganglion, the axonal growth was significantly enhanced. This study shows that the microspheres can be potentially used as a carrier of astrocytes to promote nerve regeneration in injured neural tissue.

Co-encapsulation of pancreatic islets and pentoxifylline in alginate-based microcapsules with enhanced immunosuppressive effects

Alginate-based scaffolds have received considerable attention for biomedical application because of their biocompatibility and ease of preparation. The application of alginate hydrogels for encapsulation of pancreatic islets is known as a potential treatment for type I diabetes. In this study, dextran–spermine coated microcapsules of alginate containing pancreatic islets were prepared, and then co-cultured with lymphocytes for 7 days. In addition, to prevent fibrosis and evaluating the effect of anti-inflammatory drugs, pentoxifylline was loaded in the inner layer of microcapsules. Intact and encapsulated islets in an external solution of pentoxifylline were taken as two separate controls in this study. Infrared and scanning electron microscope analyses showed polyelectrolyte complex formation between alginate and dextran–spermine. In vitro tests showed that interleukin-2 secretion from lymphocytes co-cultured with encapsulated islets containing pentoxifylline in the inner layer of microcapsules was 63.6 % lower than the corresponding value for encapsulated islets without the anti-inflammatory drug.

Formulation and characterization of clozapine and risperidone co-entrapped spray-dried PLGA nanoparticles

In the current study, polylactide-co-glycolide (PLGA) nanoparticles entrapping both clozapine (CLZ) and risperidone (RIS) were formulated by spray-drying using Buchi Nano Spray Dryer B-90 (Flawil, Switzerland). Parameters such as inlet temperature, spray mesh diameter, sample flow rate, spray rate and applied pressure were optimized to produce nanoparticles having desired release profile using both low- and high-molecular weight PLGA polymer. Smallest size nanoparticle of size around 248 nm could be prepared using a 4.0 μm mesh diameter with low-molecular weight polymer. The load of CLZ and RIS was 126.3 and 58.2 μg/mg of polymer particles, respectively. Entrapment efficiency of drugs in PLGA nanoparticles was 94.74% for CLZ and 93.12% for RIS. Both the drugs released continuously from the nanoparticle formulations. PLGA nanoparticles formulated using low-molecular weight polymer released around 80% of the entrapped drug over 10 days of time. Nature of drug inside polymer particles was amorphous, and there was no chemical interaction of CLZ and RIS with polymer. Polymeric nanoparticles were found to be non-toxic in nature using PC12 cell line. This nanospray drying process proved to be suitable for developing polymeric nanoformulation delivering dual drugs for the treatment of Schizophrenia.

Mechanical properties and dual drug delivery application of poly(lactic-co-glycolic acid) scaffolds fabricated with a poly(β-amino ester) porogen

Polymeric scaffolds that are biocompatible and biodegradable are widely used for tissue engineering applications. Scaffolds can be further enhanced by enabling the release of one or more drugs to stimulate regeneration or for the treatment of a specific disease or condition. In this study, poly(lactic-co-glycolic acid) (PLGA) microspheres were mixed with poly(β-amino ester) (PBAE) particles to create novel hybrid scaffolds capable of dual release of drug and growth factor. Fast-degrading PBAE particles loaded with the drug ketoprofen acted as porogens that provided a rapid 12h release. The PLGA microspheres were loaded with a growth factor, bone morphogenetic protein 2, and fused together around the porogens to create a slow-degrading matrix that provided sustained release lasting 70days. Drug release was further tailored by varying the amount of porogen added to the scaffold. Bioactivity measurements demonstrated that the scaffold fabrication technique did not damage the drug or protein. The compressive modulus was affected by the amount of porogen added, extending from 50 to 111MPa for loadings from 60 to 40% PBAE, and after 5days of degradation, it decreased to 0.6 to 1.1kPa when the porogen was gone. PLGA containing a quick-degrading porogen can be used to release two drugs while developing a porous microarchitecture for cell ingrowth with in a matrix capable of maintaining a compressive modulus applicable for soft tissue implants.

Improved percutaneous delivery of ketoprofen using combined application of nanocarriers and silicon microneedles

Objectives

The aim of our study was to evaluate the effect of designing ketoprofen-loaded nanosized spheres and combining them with solid silicon microneedles for enhanced and sustained percutaneous drug delivery.

Methods

Ketoprofen-loaded nanoparticles (KET-NP) were designed by modified solvent displacement method, using poly (D, L-lactic acid) (PDLLA). All prepared nanoparticles were characterised with regard to their particle size distribution, morphology, surface properties, thermal behaviour, drug content, drug release and stability. In-vitro skin permeation studies were conducted on Franz-type diffusion cells using porcine skin treated with ImmuPatch silicon microneedles (Tyndall Nation Institute, Cork, Ireland).

Key findings

The study showed that uniform nanospheres were prepared with high encapsulation efficiency and retained stable for 2 months. After an initial burst release, the PDLLA nanoparticles were capable of sustaining and controlling ketoprofen release that followed Korsmeyer–Peppas kinetics. An enhanced flux of ketoprofen was observed in the skin treated with silicon microneedles over a prolonged period of time.

Conclusions

Following application of silicon microneedle arrays, KET-NP were able to enhance ketoprofen flux and supply the porcine skin with drug over a prolonged (24 h) period of time. Our findings indicate that the delivery strategy described here could be used for the further development of effective and painless administration systems for sustained percutaneous delivery of ketoprofen.

Current status of islet encapsulation

Cell encapsulation is a method of encasing cells in a semipermeable matrix that provides a permeable gradient for the passage of oxygen and nutrients, but effectively blocks immune-regulating cells from reaching the graft, preventing rejection. This concept has been described as early as the 1930s, but it has exhibited substantial achievements over the last decade. Several advances in encapsulation engineering, chemical purification, applications, and cell viability promise to make this a revolutionary technology. Several obstacles still need to be overcome before this process becomes a reality, including developing a reliable source of islets or insulin-producing cells, determining the ideal biomaterial to promote graft function, reducing the host response to the encapsulation device, and ultimately a streamlined, scaled-up process for industry to be able to efficiently and safely produce encapsulated cells for clinical use. This article provides a comprehensive review of cell encapsulation of islets for the treatment of type 1 diabetes, including a historical perspective, current research findings, and future studies.

Enhanced function of immuno-isolated islets in diabetes therapy by co-encapsulation with an anti-inflammatory drug

Immuno-isolation of islets has the potential to enable the replacement of pancreatic function in diabetic patients. However, host response to the encapsulated islets frequently leads to fibrotic overgrowth with subsequent impairment of the transplanted grafts. Here, we identified and incorporated anti-inflammatory agents into islet-containing microcapsules to address this challenge. In vivo subcutaneous screening of 16 small molecule anti-inflammatory drugs was performed to identify promising compounds that could minimize the formation of fibrotic cell layers. Using parallel non-invasive fluorescent and bioluminescent imaging, we identified dexamethasone and curcumin as the most effective drugs in inhibiting the activities of inflammatory proteases and reactive oxygen species in the host response to subcutaneously injected biomaterials. Next, we demonstrated that co-encapsulating curcumin with pancreatic rat islets in alginate microcapsules reduced fibrotic overgrowth and improved glycemic control in a mouse model of chemically-induced type I diabetes. These results showed that localized administration of anti-inflammatory drug can improve the longevity of encapsulated islets and may facilitate the translation of this technology toward a long-term cure for type I diabetes.

Poly(ethylene glycol) cross-linked hemoglobin with antioxidant enzymes protects pancreatic islets from hypoxic and free radical stress and extends islet functionality

The objective of this study was to investigate the efficiency of multifunctional poly(ethylene glycol)-based hemoglobin conjugates crosslinked with antioxidant enzymes for their ability to protect an oxygen carrier (hemoglobin) and insulin secreting islets from the combination of hypoxic and free radical stress under simulated transplantation conditions. In this study, RINm5F cells and isolated pancreatic islets were challenged with oxidants (H(2)O(2) or xanthine and xanthine oxidase) and incubated with conjugates (hemoglobin-hemoglobin or superoxide dismutase-catalase-hemoglobin) in normoxia (21% oxygen) or hypoxia (6% or 1% oxygen). Hemoglobin protection, intracellular free radical activity and cell viability in RINm5F cells measured by methemoglobin, dichlorofluorescein-diacetate, and (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) assay, respectively, showed that cells were better protected by conjugates containing antioxidant enzymes. Insulin secretion from islets and qualitative confocal evaluation of viability showed beta cells were protected by conjugates containing antioxidant enzymes when exposed to induced stress. Our study suggested that antioxidant enzymes play a significant role in hemoglobin protection and thus extended cell protection.

Development and evaluation of olanzapine-loaded PLGA nanoparticles for nose-to-brain delivery: in vitro and in vivo studies

Olanzapine (OZ) is a second-generation or atypical antipsychotic which selectively binds to central dopamine D₂ and serotonin (5-HT(2c)) receptors. It has poor bioavailability due to hepatic first-pass metabolism and low permeability into the brain due to efflux by P-glycoproteins. The present investigation aimed to prepare a nanoparticulate drug delivery system of OZ using poly(lactic-co-glycolic acid) (PLGA) for direct nose-to-brain delivery to provide brain targeting and sustained release. PLGA nanoparticles (NP) were prepared by the nanoprecipitation technique and characterized by entrapment efficiency, particle size, zeta potential, modulated temperature differential scanning calorimetry (MTDSC) and X-ray diffraction (XRD) studies. The NP were evaluated for in vitro release, ex vivo diffusion, toxicity and pharmacokinetic studies. The NP were 91.2±5.2 nm in diameter and had entrapment efficiency 68.91±2.31%. MTDSC studies indicated broadening of the drug peak and a shift in the polymer peak, possibly due to physical interaction or H-bonding between the carbonyl groups of PLGA and the NH groups of OZ, and also due to the plasticization effect of OZ on PLGA. XRD studies indicated a decrease in the crystallinity of OZ or amorphization. In vitro drug release showed a biphasic pattern with initial burst release and, later, sustained release (43.26±0.156% after 120 h), following the Fickian diffusion-based release mechanism. Ex vivo diffusion through sheep nasal mucosa showed 13.21±1.59% of drug diffusion in 210 min from NP. Histopathological study of sheep nasal mucosa showed no significant adverse effect of OZ-loaded NP. In vivo pharmacokinetic studies showed 6.35 and 10.86 times higher uptake of intranasally delivered NP than OZ solution delivered through intravenous (IV) and intranasal (IN) route, respectively. These results proved that OZ could be transported directly to the brain after IN delivery of PLGA NP, enhanced drug concentration in the brain and would therefore be effective in improving the treatment of central nervous system disorders.

Functionalized PEG hydrogels through reactive dip-coating for the formation of immunoactive barriers

Influencing the host immune system via implantable cell-delivery devices has the potential to reduce inflammation at the transplant site and increase the likelihood of tissue acceptance. Towards this goal, an enzymatically-initiated, dip-coating technique is adapted to fabricate conformal hydrogel layers and to create immunoactive polymer coatings on cell-laden poly(ethylene glycol) (PEG) hydrogels. Glucose oxidase (GOx)-initiated dip coatings enable the rapid formation of uniform, PEG-based coatings on the surfaces of PEG hydrogels, with thicknesses up to 500 μm where the thickness is proportional to the reaction time. Biofunctional coatings were fabricated by thiolating biomolecules that were subsequently covalently incorporated into the coating layer via thiol-acrylate copolymerization. The presence of these proteins was verified via fluorescent confocal microscopy and a modified ELISA, which indicated IgG concentrations as high as 13 ± 1 ng/coated cm² were achievable. Anti-Fas antibody, known to induce T cell apoptosis, was incorporated into coatings, with or without the addition of ICAM-1 to promote T cell interaction with the functionalized coating. Jurkat T cells were seeded atop functionalized coatings and the induction of apoptosis was measured as an indicator of coating bioactivity. After 48 h of interaction with the functionalized coatings, 61 ± 9% of all cells were either apoptotic or dead, compared to only 18 ± 5% of T cells on non-functionalized coatings. Finally, the cytocompatibility of the surface-initiated GOx coating process was confirmed by modifying gels with either encapsulated β-cells or 3T3 fibroblasts within a gel that contained a PEG methacrylate coating.

Cell surface engineering with polyelectrolyte multilayer thin films

Layer-by-layer assembly of polyelectrolyte multilayer (PEM) films represents a bottom-up approach for re-engineering the molecular landscape of cell surfaces with spatially continuous and molecularly uniform ultrathin films. However, fabricating PEMs on viable cells has proven challenging owing to the high cytotoxicity of polycations. Here, we report the rational engineering of a new class of PEMs with modular biological functionality and tunable physicochemical properties which have been engineered to abrogate cytotoxicity. Specifically, we have discovered a subset of cationic copolymers that undergoes a conformational change, which mitigates membrane disruption and facilitates the deposition of PEMs on cell surfaces that are tailorable in composition, reactivity, thickness, and mechanical properties. Furthermore, we demonstrate the first successful in vivo application of PEM-engineered cells, which maintained viability and function upon transplantation and were used as carriers for in vivo delivery of PEMs containing biomolecular payloads. This new class of polymeric film and the design strategies developed herein establish an enabling technology for cell transplantation and other therapies based on engineered cells.