Deamidation, acylation and proteolysis of a model peptide in PLGA films

Peptide Acylation in Aliphatic Polyesters: a Review of Mechanisms and Inhibition Strategies

Biodegradable polyesters are widely employed in the development of controlled release systems for peptide drugs. However, one of the challenges in developing a polyester-based delivery system for peptides is the acylation reaction between peptides and polymers. Peptide acylation is an important factor that affects formulation stability and can occur during storage, in vitro release, and after drug administration. This review focuses on the mechanisms and parameters that influence the rate of peptide acylation within polyesters. Furthermore, it discusses reported strategies to minimize the acylation reaction.

Mapping in vivo microclimate pH distribution in exenatide-encapsulated PLGA microspheres

The pH inside the aqueous pores of poly(lactic-co-glycolic acid) (PLGA) microspheres, often termed microclimate pH (μpH), has been widely evaluated in vitro and shown to commonly be deleterious to pH-labile encapsulated drug molecules. However, whether the in vitro μpH is representative of the actual in vivo values has long been remained a largely unresolved issue. Herein we quantitatively mapped, for the first time, the in vivo μpH distribution kinetics inside degrading PLGA microspheres by combining two previously validated techniques, a cage implant system and confocal laser scanning microscopy. PLGA (50/50, Mw = 24-38 kDa, acid-end capped and ester-capped) microsphere formulations with and without encapsulating exenatide, a pH-labile peptide that is known to be unstable when pH > 4.5, were administered to rats subcutaneously via cage implants for up to 6 weeks. The results were compared with two different in vitro conditions. Strikingly, the in vivo μpH developed similarly to the low microsphere concentration in vitro condition with 1-μm nylon bags but very different from conventional high microsphere concentration sample-and-separate conditions. Improved maintenance of stable external pH in the release media for the former condition may have been one important factor. Stability of exenatide remaining inside microspheres was evaluated by mass spectrometry and found that it was steadily degraded primarily via pH-dependent acylation with a trend that slightly paralleled the changes in μpH. This methodology may be useful to elucidate pH-triggered instability of PLGA encapsulated drugs in vivo and for improving in vivo-predictive in vitro conditions for assessing general PLGA microsphere performance.

Performance Assessment of a 125 Human Plasma Peptide Mixture Stored at Room Temperature for Multiple Reaction Monitoring-Mass Spectrometry

Synthetic peptides are a critical requirement for the development and application of targeted mass spectrometry (MS)-based assays for the quantitation of proteins from biological matrices. Transporting synthetic peptides on dry ice from one laboratory to another is costly and often difficult because of country-specific import and export regulations. Therefore, in this study, we assessed the impact of leaving a lyophilized mixture consisting of 125 peptides at room temperature for up to 20 days, and we assessed the effect on the quantitative performance of multiple reaction monitoring-MS (MRM-MS) assays. The findings suggest that there are no significant differences in the MRM-MS results for the time points assessed in this study (up to 20 days). All the calibration curves and quality control (QC) samples met the acceptance criteria for precision and accuracy (raw data are available via the public MS data repository PanoramaWeb, identifier: /MRM Proteomics/2020_BAK125_RT). The number of endogenous proteins quantifiable across five plasma samples was consistently between 87 and 99 out of 125 for all time points. Moreover, the coefficients of variation (CVs) calculated for the majority of peptide concentrations across all samples and time points were <5%. In addition, a lyophilized peptide mixture was transported from Canada to Iceland without dry ice. The results showed that there was no significant difference in the quantitative performance, with the determined concentrations of most proteins in the samples falling within 30% between the analyses performed on the same three plasma samples in Iceland and those in Canada. Overall, a comparison of the results obtained in Canada and in Iceland indicated that the peptides were stable under the conditions tested and also indicated that shipping lyophilized peptide mixtures without dry ice, but in the presence of sufficient desiccant material, could be a feasible option in cases where transport difficulties may arise or dry-ice sublimation may occur.

Characterization of attributes and in vitro performance of exenatide-loaded PLGA long-acting release microspheres

Bydureon® (Bdn) is a once-weekly injectable long-acting release (LAR) product for adults with type 2 diabetes based on PLGA microspheres encapsulating the glucagon like peptide (GLP-1) analog, exenatide. Despite its widespread use in type 2 diabetes treatment, little information has been published concerning the physical-chemical aspects and exenatide stability in this product. Here, we developed and validated methods to evaluate attributes and performance of Bdn such as particle size/size distribution and residual levels of moisture and organic solvent(s). The reverse engineering of the exenatide LAR was also performed to identify and quantify principal components in the product. Stability-indicating UPLC and LC-MS methods were applied to characterize exenatide degradation (such as oxidation, deamidation and acylation products) during in vitro release evaluation. The 55-μm volume-median Bdn microspheres slowly released the exenatidein vitroover two months with a very low initial burst release to avoid unwanted side effects. Residual organic solvent levels (methylene chloride, ethanol, heptane, and silicon oil) also met the USP criteria. Peptide acylation was the most prominent peptide reaction during both encapsulation and in vitro release, and the acylated peptide steadily increased during release relative to parent exenatide, becoming the most abundant peptide species extracted from the microspheres at later release stages. The presence of peptide impurities during the release period, which are not extractable in the polymer and likely insoluble in water, might be one potential cause for immunogenicity. Further evaluation will be needed to confirm this hypothesis. Release of peptide was minimal over the first 2 weeks before the microspheres steadily released peptide for more than 28 days. The rigorous technical approach discussed in this paper may provide critical information for both companies and the FDA for developing generic exenatide-PLGA formulations and other important PLGA microsphere products.

Characterization of Octreotide-PLGA Binding by Isothermal Titration Calorimetry

Cationic peptides are well known to readily bind poly(lactic-co-glycolic acids) (PLGAs) with a carboxylic acid (-COOH) end group, which poses a significant challenge to develop PLGA-based delivery systems for peptide therapeutics. This binding has been considered as a critical step leading to the peptide acylation within PLGA-based formulations, which is also known to affect microencapsulation and release. Herein, we utilized nano isothermal titration calorimetry (NanoITC) to investigate the thermodynamics of peptide-PLGA binding in dimethyl sulfoxide (DMSO) using a model cationic octapeptide, octreotide, which contains two primary amino groups located at its N-terminus and lysine side chain at position five. ITC results of PLGAs with different lactic acid to glycolic acid ratios (50:50 to 100:0) revealed that the extent of the interaction with the octreotide was solely dependent on the availability of the acid end group of the PLGA. The binding constants (K_a) at 37 °C were determined in a narrow range from 1.33 to 1.72 × 10⁴ M^-1 with 0.59 to 0.66 binding stoichiometries irrespective of the lactic/glycolic acid ratio in the PLGA-COOH. Over 25-65 °C, the octreotide-PLGA-COOH interactions were found to be enthalpically favored (ΔH < 0) and entropically unfavorable (ΔS < 0). Hence, the interactions were characterized as enthalpically driven. At different sodium chloride (NaCl) levels, the sensitivity of thermodynamics of the interactions to the charge screening effect contributed by the NaCl unveiled the actual driving force of the octreotide-PLGA-COOH interactions is simple ion-pairing.

Silica particles incorporated into PLGA-based in situ-forming implants exploit the dual advantage of sustained release and particulate delivery

Poly (lactic-co-glycolic acid) (PLGA) in situ-forming implants are well-established drug delivery systems for controlled drug release over weeks up to months. To prevent initial burst release, which is still a major issue associated with PLGA-based implants, drugs attached to particulate carriers have been encapsulated. Unfortunately, former studies only investigated the resulting release of the soluble drugs and hence missed the potential offered by particulate drug release. In this study, we developed a system capable of releasing functional drug-carrying particles over a prolonged time. First, we evaluated the feasibility of our approach by encapsulating silica particles of different sizes (500 nm and 1 μm) and surface properties (OH or NH₂ groups) into in situ-forming PLGA implants. In this way, we achieved sustained release of particles over periods ranging from 30 to 70 days. OH-carrying particles were released much more quickly when compared to NH₂-modified particles. We demonstrated that the underlying release mechanisms involve size-dependent diffusion and polymer-particle interactions. Second, particles that carried covalently-attached ovalbumin (OVA) on their surfaces were incorporated into the implant. We demonstrated that OVA was released in association with the particles as functional entities over a period of 30 days. The released particle-drug conjugates maintained their colloidal stability and were efficiently taken up by antigen presenting cells. This system consisting of particles incorporated into PLGA-based in situ-forming implants offers the dual advantage of sustained and particulate release of drugs as a functional unit and has potential for future use in many applications, particularly in single-dose vaccines.

Polymeric nanoparticles in development for treatment of pulmonary infectious diseases

Serious lung infections, such as pneumonia, tuberculosis, and chronic obstructive cystic fibrosis-related bacterial diseases, are increasingly difficult to treat and can be life-threatening. Over the last decades, an array of therapeutics and/or diagnostics have been exploited for management of pulmonary infections, but the advent of drug-resistant bacteria and the adverse conditions experienced upon reaching the lung environment urge the development of more effective delivery vehicles. Nanotechnology is revolutionizing the approach to circumventing these barriers, enabling better management of pulmonary infectious diseases. In particular, polymeric nanoparticle-based therapeutics have emerged as promising candidates, allowing for programmed design of multi-functional nanodevices and, subsequently, improved pharmacokinetics and therapeutic efficiency, as compared to conventional routes of delivery. Direct delivery to the lungs of such nanoparticles, loaded with appropriate antimicrobials and equipped with 'smart' features to overcome various mucosal and cellular barriers, is a promising approach to localize and concentrate therapeutics at the site of infection while minimizing systemic exposure to the therapeutic agents. The present review focuses on recent progress (2005-2015) important for the rational design of nanostructures, particularly polymeric nanoparticles, for the treatment of pulmonary infections with highlights on the influences of size, shape, composition, and surface characteristics of antimicrobial-bearing polymeric nanoparticles on their biodistribution, therapeutic efficacy, and toxicity. WIREs Nanomed Nanobiotechnol 2016, 8:842-871. doi: 10.1002/wnan.1401 For further resources related to this article, please visit the WIREs website.

A Computational Study of the Mechanism of Succinimide Formation in the Asn-His Sequence: Intramolecular Catalysis by the His Side Chain

The rates of deamidation reactions of asparagine (Asn) residues which occur spontaneously and nonenzymatically in peptides and proteins via the succinimide intermediate are known to be strongly dependent on the nature of the following residue on the carboxyl side (Xxx). The formation of the succinimide intermediate is by far the fastest when Xxx is glycine (Gly), the smallest amino acid residue, while extremely slow when Xxx is bulky such as isoleucine (Ile) and valine (Val). In this respect, it is very interesting to note that the succinimide formation is definitely accelerated when Xxx is histidine (His) despite its large size. In this paper, we computationally show that, in an Asn-His sequence, the His side-chain imidazole group (in the neutral Nε-protonated form) can specifically catalyze the formation of the tetrahedral intermediate in the succinimide formation by mediating a proton transfer. The calculations were performed for Ace-Asn-His-Nme (Ace = acetyl, Nme = methylamino) as a model compound by the density functional theory with the B3LYP functional and the 6-31+G(d,p) basis set. We also show that the tetrahedral intermediate, once protonated at the NH₂ group, easily releases an ammonia molecule to give the succinimide species.

How does the pathophysiological context influence delivery of bone growth factors?

"Orthobiologics" represents an important category of therapeutics for the regeneration of bone defects caused by injuries or diseases, and bone growth factors are a particularly rapidly growing sub-category. Clinical application of bone growth factors has accelerated in the last two decades with the introduction of BMPs into clinical bone repair. Optimal use of growth factor-mediated treatments heavily relies on controlled delivery, which can substantially influence the local growth factor dose, release kinetics, and biological activity. The characteristics of the surrounding environment, or "context", during delivery can dictate growth factor loading efficiency, release and biological activity. This review discusses the influence of the surrounding environment on therapeutic delivery of bone growth factors. We specifically focus on pathophysiological components, including soluble components and cells, and how they can actively influence the therapeutic delivery and perhaps efficacy of bone growth factors.

Glycolic acid-catalyzed deamidation of asparagine residues in degrading PLGA matrices: a computational study

Poly(lactic-co-glycolic acid) (PLGA) is a strong candidate for being a drug carrier in drug delivery systems because of its biocompatibility and biodegradability. However, in degrading PLGA matrices, the encapsulated peptide and protein drugs can undergo various degradation reactions, including deamidation at asparagine (Asn) residues to give a succinimide species, which may affect their potency and/or safety. Here, we show computationally that glycolic acid (GA) in its undissociated form, which can exist in high concentration in degrading PLGA matrices, can catalyze the succinimide formation from Asn residues by acting as a proton-transfer mediator. A two-step mechanism was studied by quantum-chemical calculations using Ace-Asn-Nme (Ace = acetyl, Nme = NHCH₃) as a model compound. The first step is cyclization (intramolecular addition) to form a tetrahedral intermediate, and the second step is elimination of ammonia from the intermediate. Both steps involve an extensive bond reorganization mediated by a GA molecule, and the first step was predicted to be rate-determining. The present findings are expected to be useful in the design of more effective and safe PLGA devices.

Minimizing acylation of peptides in PLGA microspheres

The main objective of this study was to characterize and find mechanisms to prevent acylation of therapeutic peptides encapsulated in glucose-star poly(d,l-lactic-co-glycolic acid) (PLGA) microspheres. The effect of addition of divalent cation salts CaCl(2), MnCl(2) as well as carboxymethyl chitosan (CMCS) on inhibition of acylation of octreotide (Oct), salmon calcitonin (sCT), and human parathyroid hormone (hPTH) was evaluated. Peptide content and integrity inside the degrading microspheres was monitored by reversed-phase high performance liquid chromatography (HPLC) and mass spectrometry during release incubation under physiological conditions. The extent of peptide acylation was strongly inhibited in the formulations containing divalent cations and/or CMCS as excipients, although specific effects were dependent on the specific peptide and excipient combinations. Both inorganic cations improved stability of Oct and hPTH but not sCT. Addition of CMCS alone was ineffective. Combining inorganic cations with CMCS improved stability of Oct and sCT but it had no effect on hPTH stability. The operative stabilization mechanisms are consistent with blocking peptide-PLGA interactions by a) directly competing for PLGA interactions with dications and/or b) increasing peptide affinity in the stabilizer phase within PLGA pores. Hence, inorganic multivalent cations are general stabilizers against peptide acylation, the effect of which may be augmented in certain instances with addition of CMCS.

Reversible blocking of amino groups of octreotide for the inhibition of formation of acylated peptide impurities in poly(lactide-co-glycolide) delivery systems

The purpose of this study was to develop a novel method to inhibit the formation of acylated peptide impurities in poly(D,L-lactide-co-glycolide) (PLGA) formulations by reversely blocking the amino groups of octreotide with maleic anhydride (MA). Two mono-MA conjugates with different modification sites (N terminus and Lys residue) and di-MA conjugate of octreotide were prepared and isolated by reversed-phase high-performance liquid chromatography (RP-HPLC). The polymer interaction of peptides and the formation of acylated peptides were monitored by RP-HPLC. The stability of MA-octreotide conjugates in PLGA films was studied in 0.1 M phosphate buffer (pH 7.4) at 37°C. The conjugation of MA to octreotide substantially inhibited the interaction of peptide with PLGA polymer and the subsequent formation of acylated peptide impurities. The MA-octreotides were successfully converted to intact octreotide as pH drops by PLGA hydrolysis. In PLGA films, MA-octreotide also showed complete inhibition of peptide acylation. In conclusion, MA conjugation provides a viable approach for stabilizing peptides in PLGA delivery systems.

Formulation of sustained-release microspheres of granulocyte macrophage colony stimulating factor by freezing-induced phase separation with dextran and encapsulation with blended polymers

This study aimed to assess the potential merits of formulating sustained-release microspheres of recombinant human granulocyte macrophage colony stimulating factor (rhGM-CSF) via freezing-induced phase separation (FIPS) of the protein with dextran followed by encapsulation with binary mixture of poly(lactic-co-glycolic acid) (PLGA) 2A (MW∼12K) and 3A (MW∼47K) or of PLGA2A and polylactic acid (PLA; MW∼83K). The formulated dextran particles and microspheres were characterized in vitro for loading, aggregation, bioactivity and release behavior of the protein where appropriate. rhGM-CSF retained about 60% of bioactivity with no significant aggregation after each formulation step. Encapsulation of protein-loaded dextran particles attained only 80% with the PLGA2A and PLGA3A blend, but 100% with the PLGA2A and PLA mixture. The former formulation exhibited a triphasic in-vitro release profile typical of PLGA microspheres while the latter revealed a much lower initial burst followed by a steady and complete release of rhGM-CSF with preserved bioactivity over a 15-day period.

Polyketal microparticles for therapeutic delivery to the lung

Inflammation in the setting of interstitial lung disease (ILD) occurs in the distal alveolar spaces of the lung, which presents significant challenges for therapeutic delivery. The development of aerosolizable microparticles from non-immunogenic polymers is needed to enable the clinical translation of numerous experimental therapeutics that require localization to the deep lung and repeated delivery for optimal efficacy. Polyketals (PK), a family of polymers, have several unique properties that make them ideal for lung delivery, specifically their hydrolysis into non-acidic, membrane-permeable compounds and their capacity to form microparticles with the aerodynamic properties needed for aerosolization. In this study, we tested the lung biocompatibility of microparticles created from a polyketal polymer, termed PK3, following intratracheal instillation in comparison to commonly used PLGA microparticles. We furthermore tested the initial efficacy of PK3 microparticles to encapsulate and effectively deliver active superoxide dismutase (SOD), a free radical scavenging enzyme, in a model of lung fibrosis. Our findings indicate that PK3 microparticles display no detectable level of alveolar or airway inflammation, whereas PLGA induced a small inflammatory response. Furthermore, SOD-loaded into PK3 microparticles maintained its activity upon release and, when delivered via PK3 microparticles, inhibited the extent of lung fibrosis.

Inhibition of peptide acylation in PLGA microspheres with water-soluble divalent cationic salts

PURPOSE

To test the potential of water-soluble divalent cationic salts to inhibit acylation of octreotide encapsulated in poly(D,L-lactic-co-glycolic acid)-star (PLGA) microspheres.

METHODS

The divalent cationic salts, calcium chloride and manganese chloride, previously shown to disrupt peptide sorption, were introduced in PLGA microspheres prepared by the double emulsion-solvent evaporation method. Peptide stability was monitored by reversed-phase high performance liquid chromatography (RP-HPLC) and identified by liquid chromatography coupled with mass spectrometry (LC-MS) during microsphere degradation under physiological conditions for 4 weeks. Microsphere morphology and salt content were examined by scanning electron microscopy (SEM) and inductively coupled plasma-optical emission spectroscopy (ICP-OES), respectively.

RESULTS

Addition of divalent cationic salts solely to the organic phase did not provide acylation inhibition. However, addition of the salt inhibitors to both the primary emulsion and the outer water phase resulted in improved drug and salt encapsulation efficiency as well as significantly decreased salt leaching and octreotide acylation. After 28 days, the extent of acylation inhibition afforded by divalent cations was > 58% relative to 13% for the NaCl control group.

CONCLUSIONS

Water-soluble divalent cationic salts represent a suitable class of stabilizer of peptide acylation in PLGA microspheres and this study provides an important formulation approach to maximize stabilizer potency.

Towards heat-stable oxytocin formulations: analysis of degradation kinetics and identification of degradation products

Purpose

To investigate degradation kinetics of oxytocin as a function of temperature and pH, and identify the degradation products.

Materials and Methods

Accelerated degradation of oxytocin formulated at pH 2.0, 4.5, 7.0 and 9.0 was performed at 40, 55, 70 and 80°C. Degradation rate constants were determined from RP-HPLC data. Formulations were characterized by HP-SEC, UV absorption and fluorescence spectroscopy. Degradation products were identified by ESI-MS/MS.

Results

The loss of intact oxytocin in RP-HPLC was pH- and temperature-dependent and followed (pseudo) first order kinetics. Degradation was fastest at pH 9.0, followed by pH 7.0, pH 2.0 and pH 4.5. The Arrhenius equation proved suitable to describe the kinetics, with the highest activation energy (116.3 kJ/mol) being found for pH 4.5 formulations. At pH 2.0 deamidation of Gln⁴, Asn⁵, and Gly⁹-NH₂, as well as combinations thereof were found. At pH 4.5, 7.0 and 9.0, the formation of tri- and tetrasulfide-containing oxytocin as well as different types of disulfide and dityrosine-linked dimers were found to occur. Beta-elimination and larger aggregates were also observed. At pH 9.0, mono-deamidation of Gln⁴, Asn⁵, and Gly⁹-NH₂ additionally occurred.

Conclusions

Multiple degradation products of oxytocin have been identified unequivocally, including various deamidated species, intramolecular oligosulfides and covalent aggregates. The strongly pH dependent degradation can be described by the Arrhenius equation.

Chemical degradation of peptides and proteins in PLGA: a review of reactions and mechanisms

Biodegradable poly(lactide-co-glycolide) (PLGA) polymers have been studied extensively for the controlled release of peptide and protein drugs. In addition to polymer biodegradation, chemical degradation of the incorporated peptide/protein has also been reported in PLGA devices, and the role of the polymer in promoting these reactions has been debated. This review summarizes the peptide/protein chemical degradation reactions that have been reported in PLGA systems and their mechanisms. Reported methods for stabilizing peptides and proteins in PLGA devices are also discussed.

Effect of excipients on PLGA film degradation and the stability of an incorporated peptide

The effect of pH modifying excipients on the chemical stability of a model peptide (VYPNGA) and the degradation of poly(dl-lactide-co-glycolide)(PLGA) was studied in PLGA films under accelerated storage conditions. pH modifiers included a basic amine (proton sponge), a basic salt (magnesium hydroxide) and two pH buffers (ammonium acetate and magnesium acetate). Changes in film pH were monitored using (13)C NMR, peptide degradation products were quantified by LC/MS/MS and PLGA degradation was analyzed by TGA, DSC and SEC. Inclusion of pH modifiers had little impact on PLGA degradation. The proton sponge affected an initial decrease in pH but reduced peptide deamidation and chain cleavage relative to an unbuffered control. Magnesium hydroxide produced an initial increase in pH but also showed increased peptide deamidation. Ammonium acetate decreased pH and increased peptide chain cleavage, presumably due to increased PLGA hydrolysis. Magnesium acetate buffer increased the initial pH but resulted in increased peptide loss. The extent of peptide acylation increased in all formulations, most notably in the proton sponge modified films. The effectiveness of pH modifiers in PLGA formulations under storage conditions is dependant on both the mechanism of pH alteration and the peptide degradation reaction of interest.