Controlled-release of epidermal growth factor from cationized gelatin hydrogel enhances corneal epithelial wound healing

An agonist of the adenosine A2A receptor, CGS21680, promotes corneal epithelial wound healing via the YAP signalling pathway

BACKGROUND AND PURPOSE

The adenosine A2A receptor (A2AR) is involved in various physiological and pathological processes in the eye; however, the role of the A2AR signalling in corneal epithelial wound healing is not known. Here, the expression, therapeutic effects and signalling mechanism of A2AR in corneal epithelial wound healing were investigated using the A2AR agonist CGS21680.

EXPERIMENTAL APPROACH

A2AR localization and expression during wound healing in the murine cornea were determined by immunofluorescence staining, quantitative reverse transcription polymerase chain reaction (RT-qPCR) and western blotting. The effect of CGS21680 on corneal epithelial wound healing in the lesioned corneal and cultured human corneal epithelial cells (hCECs) by modulating cellular proliferation and migration was critically evaluated. The role of Hippo-YAP signalling in mediating the CGS21680 effect on wound healing by pharmacological inhibition of YAP signalling was explored.

KEY RESULTS

A2AR expression was up-regulated after corneal epithelial injury. Topical administration of CGS21680 dose-dependently promoted corneal epithelial wound healing in the injured corneal epithelium by promoting cellular proliferation. Furthermore, CGS21680 accelerated the cellular proliferation and migration of hCECs in vitro. A2AR activation promoted early up-regulation and later down-regulation of YAP signalling molecules, and pharmacological inhibition of YAP signalling reverted CGS21680-mediated wound healing effect in vivo and in vitro.

CONCLUSION AND IMPLICATIONS

A2AR activation promotes wound healing by enhancing cellular proliferation and migration through the YAP signalling pathway. A2ARs play an important role in the maintenance of corneal epithelium integrity and may represent a novel therapeutic target for facilitating corneal epithelial wound healing.

The combined effect of epidermal growth factor and keratinocyte growth factor delivered by hyaluronic acid hydrogel on corneal wound healing

This study strategically incorporates epidermal growth factor (EGF) and keratinocyte growth factor (KGF) within a hyaluronic acid (HA) hydrogel to enhance corneal wound healing. The controlled release of EGF and KGF from the HA hydrogel is engineered to promote the regeneration of both the epithelial and stromal layers. Specifically, EGF plays a pivotal role in the regeneration of the epithelial layer, while KGF exhibits efficacy in the regeneration of the stromal layer. The combination of these growth factors facilitates efficient regeneration of each layer and demonstrates the capability to modulate each other's regenerative effects. The interplay between EGF and KGF provides an understanding of their cooperative influence on the dynamics of corneal wound healing. The results of this study contribute to the development of advanced strategies for corneal wound management and offer insights into the complex process of corneal regeneration.

Visible-Light Cross-Linkable Multifunctional Hydrogels Loaded with Exosomes Facilitate Full-Thickness Skin Defect Wound Healing through Participating in the Entire Healing Process

The management of severe full-thickness skin defect wounds remains a challenge due to their irregular shape, uncontrollable bleeding, high risk of infection, and prolonged healing period. Herein, an all-in-one OD/GM/QCS@Exo hydrogel was prepared with catechol-modified oxidized hyaluronic acid (OD), methylacrylylated gelatin (GM), and quaternized chitosan (QCS) and loaded with adipose mesenchymal stem cell-derived exosomes (Exos). Cross-linking of the hydrogel was achieved using visible light instead of ultraviolet light irradiation, providing injectability and good biocompatibility. Notably, the incorporation of catechol groups and multicross-linked networks in the hydrogels conferred strong adhesion properties and mechanical strength against external forces such as tensile and compressive stress. Furthermore, our hydrogel exhibited antibacterial, anti-inflammatory, and antioxidant properties along with wound-healing promotion effects. Our results demonstrated that the hydrogel-mediated release of Exos significantly promotes cellular proliferation, migration, and angiogenesis, thereby accelerating skin structure reconstruction and functional recovery during the wound-healing process. Overall, the all-in-one OD/GM/QCS@Exo hydrogel provided a promising therapeutic strategy for the treatment of full-thickness skin defect wounds through actively participating in the entire process of wound healing.

Oxidized alginate-gelatin (ADA-GEL)/silk fibroin/Cu-Ag doped mesoporous bioactive glass nanoparticle-based hydrogels for potential wound care treatments

The present work focuses on developing 5% w/v oxidized alginate (alginate di aldehyde, ADA)-7.5% w/v gelatin (GEL) hydrogels incorporating 0.25% w/v silk fibroin (SF) and loaded with 0.3% w/v Cu-Ag doped mesoporous bioactive glass nanoparticles (Cu-Ag MBGNs). The microstructural, mechanical, and biological properties of the composite hydrogels were characterized in detail. The porous microstructure of the developed ADA-GEL based hydrogels was confirmed by scanning electron microscopy, while the presence of Cu-Ag MBGNs in the synthesized hydrogels was determined using energy dispersive x-ray spectroscopy. The incorporation of 0.3% w/v Cu-Ag MBGNs reduced the mechanical properties of the synthesized hydrogels, as investigated using micro-tensile testing. The synthesized ADA-GEL loaded with 0.25% w/v SF and 0.3% w/v Cu-Ag MBGNs showed a potent antibacterial effect againstEscherichia coliandStaphylococcus aureus. Cellular studies using the NIH3T3-E1 fibroblast cell line confirmed that ADA-GEL films incorporated with 0.3% w/v Cu-Ag MBGNs exhibited promising cellular viability as compared to pure ADA-GEL (determined by WST-8 assay). The addition of SF improved the biocompatibility, degradation rate, moisturizing effects, and stretchability of the developed hydrogels, as determinedin vitro. Such multimaterial hydrogels can stimulate angiogenesis and exhibit desirable antibacterial properties. Therefore further (in vivo) tests are justified to assess the hydrogels' potential for wound dressing and skin tissue healing applications.

3D printing sequentially strengthening high-strength natural polymer hydrogel bilayer scaffold for cornea regeneration

3D printing of high-strength natural polymer biodegradable hydrogel scaffolds simultaneously resembling the biomechanics of corneal tissue and facilitating tissue regeneration remains a huge challenge due to the inherent brittleness of natural polymer hydrogels and the demanding requirements of printing. Herein, concentrated aqueous solutions of gelatin and carbohydrazide-modified alginate (Gel/Alg-CDH) are blended to form a natural polymer hydrogel ink, where the hydrazides in Alg-CDH are found to form strong hydrogen bonds with the gelatin. The hydrogen-bonding-strengthened Gel/Alg-CDH hydrogel demonstrates an appropriate thickened viscosity and shear thinning for extrusion printing. The strong hydrogen bonds contribute to remarkably increased mechanical properties of Gel/Alg-CDH hydrogel with a maximum elongation of over 400%. In addition, sequentially Ca2+-physical crosslinking and then moderately chemical crosslinking significantly enhance the mechanical properties of Gel/Alg-CDH hydrogels that ultimately exhibit an intriguing J-shaped stress-strain curve (tensile strength of 1.068 MPa and the toughness of 677.6 kJ/m2). The dually crosslinked Gel-Alg-CDH-Ca2+-EDC hydrogels demonstrate a high transparency, physiological swelling stability and rapid enzymatic degradability, as well as suturability. The growth factor and drug-loaded biomimetic bilayer hydrogel scaffold are customized via a multi-nozzle printing system. This bioactive bilayer hydrogel scaffold considerably promotes regeneration of corneal epithelium and stroma and inhibits cornea scarring in rabbit cornea keratoplasty.

Development and biological evaluation of smart powder bandage for wound healing and dressing applications

Cutaneous wounds are one of the pressing concerns for healthcare systems globally. With large amounts of water, conventional hydrogels encounter obstacles in effectively delivering small molecules and peptides for wound healing. The surplus water content challenges the stability and sustained release of small molecules and peptides, diminishing their therapeutic efficacy. Our pioneering smart powder bandage, fabricated through freeze-drying, ensures a water content of <1 % during storage. Upon contact with wound exudate, it forms hydrogel layers, thereby optimizing the delivery of peptides. Tailored for thermosensitive peptides such as EGF, this strategy surmounts the limitations of conventional hydrogels, providing a robust platform for efficacious therapeutic delivery in wound healing applications. Developing multifunctional wound dressings with antibacterial, anti-inflammatory, hemostatic, and healing properties is essential to promote wound healing. Therefore, the current investigation reports the development of multifunctional EGF@Silnanom SPB with the above-mentioned properties to promote wound healing using silver nanomix (Silnanom) and bioactive epidermal growth factors (EGF) as active therapeutics. The characterization of smart powder bandage (SPB) revealed that Silnanom were homogeneously dispersed in the entangled polymer network. The multifunctional smart powder bandage exhibited high bacterial inhibition rates against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), and rigorous hemocompatibility, cell compatibility, and in vivo studies also confirmed its biocompatibility. Furthermore, multifunctional EGF@Silnanom SPB effectively reduced pro-inflammatory markers, enhanced collagen deposition, promoted angiogenesis, and accelerated wound healing in a full-thickness mouse wound model through the sustained release of Silnanom and EGF. Additionally, the results of hemostasis analysis on the tail amputation mouse model confirmed the hemostasis properties of the EGF@Silnanom SPB. Overall, the multifunctional EGF@Silnanom SPB shows promising potential for skin wound repair, offering a potent and effective solution to the challenges posed by conventional wound dressings.

Emerging advances in hydrogel-based therapeutic strategies for tissue regeneration

Significant developments in cell therapy and biomaterial science have broadened the therapeutic landscape of tissue regeneration. Tissue damage is a complex biological process in which different types of cells play a specific role in repairing damaged tissues and growth factors strictly regulate the activity of these cells. Hydrogels have become promising biomaterials for tissue regeneration if appropriate materials are selected and the hydrogel properties are well-regulated. Importantly, they can be used as carriers for living cells and growth factors due to the high water-holding capacity, high permeability, and good biocompatibility of hydrogels. Cell-loaded hydrogels can play an essential role in treating damaged tissues and open new avenues for cell therapy. There is ample evidence substantiating the ability of hydrogels to facilitate the delivery of cells (stem cell, macrophage, chondrocyte, and osteoblast) and growth factors (bone morphogenetic protein, transforming growth factor, vascular endothelial growth factor and fibroblast growth factor). This paper reviewed the latest advances in hydrogels loaded with cells or growth factors to promote the reconstruction of tissues. Furthermore, we discussed the shortcomings of the application of hydrogels in tissue engineering to promote their further development.

Agar/gelatin hydro-film containing EGF and Aloe vera for effective wound healing

In the current study, we produced a hydro-film dressing for the treatment of chronic wounds. The hydro-film structure was composed of gelatin cross-linked with citric acid, agar and Aloe vera extract (AV); additionally epidermal growth factor (EGF) was loaded to promote wound healing. Due to the excellent hydrogel-forming ability of gelatin, the obtained hydro-film was able to swell 884 ± 36% of its dry weight, which could help controlling wound moisture. To improve gelatin mechanical properties, polymer chains were cross-linked with citric acid and agar, reaching an ultimate tensile strength that was in the highest range of human skin. In addition, it showed a slow degradation profile that resulted in a remaining weight of 28 ± 8% at day 28. Regarding, biological activity, the addition of AV and citric acid provided the ability to reduce human macrophage activation, which could help reverse the permanent inflammatory state of chronic wounds. Moreover, loaded EGF, together with the structural AV of the hydro-film, promoted human keratinocyte and fibroblast migration, respectively. Furthermore, the hydro-films presented excellent fibroblast adhesiveness, so they could be useful as provisional matrices for cell migration. Accordingly, these hydro-films showed suitable physicochemical characteristics and biological activity for chronic wound healing applications.

EGF, a veteran of wound healing: highlights on its mode of action, clinical applications with focus on wound treatment, and recent drug delivery strategies

Epidermal growth factor (EGF) has been used in wound management and regenerative medicine since the late 1980s. It has been widely utilized for a long time and still is because of its excellent tolerability and efficacy. EGF has many applications in tissue engineering, cancer therapy, lung diseases, gastric ulcers, and wound healing. Nevertheless, its in vivo and during storage stability is a primary concern. This review focuses on the topical use of EGF, especially in chronic wound healing, the emerging use of biomaterials to deliver it, and future research possibilities. To successfully deliver EGF to wounds, a delivery system that is proteolytically resistant and stable over the long term is required. Biomaterials are an area of interest for the development of such systems. These systems may be used in non-healing wounds such as diabetic foot ulcers, pressure ulcers, and burns. In these pathologies, EGF can reduce the risk of amputation of the lower extremities, as it accelerates the wound healing process. Furthermore, appropriate delivery system would also stabilize and control the EGF release profile in a wound. Several in vitro and in vivo studies have already proven the efficacy of such systems in the above-mentioned types of wounds. Moreover, several formulations such as ointments and intralesional injections are already available on the market. However, these products are still problematic in terms of inadequate diffusion of EGF, low bioavailability storage conditions, and shelf-life. This review discusses the nano formulations comprising biomaterials infused with EGF which could be a promising delivery system for chronic wound healing in the future.

Applications of hydrogel materials in different types of corneal wounds

Severe corneal injury can lead to a decrease in light transmission and even blindness. Currently, corneal transplantation has been applied as the primary treatment for corneal blindness; however, the worldwide shortage of suitable corneal donor tissue means that a large proportion of patients have no access to corneal transplants. This situation has contributed to the rapid development of various corneal substitutes. The development and optimization of novel hydrogels that aim to replace partial or full-thickness pathological corneas have advanced in the last decade. Meanwhile, with the help of 3D bioprinting technology, hydrogel materials can be molded to a refined and controllable shape, attracting many scientists to the field of corneal reconstruction research. Although hydrogels are not yet available as a substitute for traditional clinical methods of corneal diseases, their rapid development makes us confident that they will be in the near future. We summarize the application of hydrogel materials for various types of corneal injuries frequently encountered in clinical practice, especially focusing on animal experiments and preclinical studies. Finally, we discuss the development and achievements of 3D bioprinting in the treatment of corneal injury.

Controlled Release of Epidermal Growth Factor from Furfuryl-Gelatin Hydrogel Using in Situ Visible Light-Induced Crosslinking and Its Effects on Fibroblasts Proliferation and Migration

Hydrogels are widely used in tissue engineering as materials that regulate cell proliferation, migration, and differentiation. They also act as promising biomaterials that can provide a variety of stimuli by influencing the surrounding microenvironment, which can be achieved by modulating their mechanical properties, thereby aiding soluble factor delivery. Here, we developed a gelatin-based injectable hydrogel that has controllable mechanical properties and demonstrates sustained drug release without the need for invasive surgery. Gelatin was modified with furfuryl groups, and riboflavin phosphate was used as a photoinitiator to crosslink the hydrogel using visible light. A hydrogel–with a storage modulus in the range of 0.2–15 kPa was formed by maintaining the concentration of furfuryl-gelatin within 10–30% w/v. Consequently, their mechanical properties can be tailored for their applications. The furfuryl-gelatin hydrogel was loaded with maleimide-modified epidermal growth factor (EGF) as a model drug to achieve a controlled-release system. The sustained release of maleimide-EGF due to gelatin hydrogel matrix degradation was observed. Cell proliferation and scratch assays were performed to verify its effect on fibroblasts. When EGF was physically entrapped in the hydrogel matrix, the released EGF considerably affected cell proliferation and scratch closure of fibroblasts at the beginning of the culture. By contrast, maleimide-EGF was released sustainably and steadily and affected cell proliferation and scratch closure after the initial stage. We demonstrated that the release of soluble factors could be controlled by modulating the mechanical properties. Thus, the injectable hydrogel formed by in situ visible light-induced crosslinking could be a promising biomaterial for tissue engineering and biomedical therapeutics.

Design and development of thyroxine/heparin releasing affordable cotton dressings to treat chronic wounds

This research on a thyroxine/heparin-based cotton wound dressing tests angiogenic and wound healing ability of thyroxine/heparin in a chick chorionic allantoic membrane bioassay and in skin wounds in healthy rats. Commercially available cotton dressings were simply loaded with thyroxine/heparin solutions and coated with wax. Prior to undertaking the animal study, we assessed in vitro release of thyroxine/heparin from coated and uncoated cotton dressings. Both showed more than 85% release of drug over 14 days, though the lesser release was observed in wax-coated thyroxine/heparin dressing as compared to uncoated thyroxine/heparin dressing. Testing of angiogenesis through CAM assay proved good angiogenic potential of heparin and thyroxin, but the thyroxine found more angiogenic than heparin. In animal study, full-thickness skin wounds of 20 mm diameter showed good healing in both heparin and thyroxine-treated groups. But the most striking result was seen in the thyroxine-treated group where thyroxine showed significant difference with heparin-treated group and completely healed the wounds in 23 days. Thus, the study suggest that thyroxine possesses greater angiogenic and wound healing potential than heparin, and the use of thyroxine/heparin-loaded wax-coated cotton dressing could be a cost-effective option for the management of chronic wounds.

Emerging Role of Elastin-Like Polypeptides in Regenerative Medicine

Significance: Wound dressing based on naturally derived polymer provides a useful platform for treatment of skin injuries. Owing to the high mechanical strength and tunable structural and physicochemical properties of human elastin-like polypeptides (ELPs), they may be used as excellent materials for fabricating biocompatible scaffolds and other products for wound management. Recent Advances: Designing recombinant ELPs mimicking natural elastin to fabricate synthetic polymers suitable for human health care has generated significant interest. ELP-based cell-adhesive biopolymers have been used as an alternative for successful sutureless wound closure due to the physicochemical characteristics of the extracellular matrix. Critical Issues: Different systems of ELPs are being developed in the form of scaffolds, films, hydrogels, photo-linkable sheets, and composites linked with various types of growth factors for wound healing application. However, optimizing the quality and safety attributes for specific application needs designing of recombinant ELPs with structural and functional modifications as needed for the intervention. Future Direction: Chronic wounds are difficult to treat as the wound repair process is interrupted by conditions such as excessive inflammation, impaired extracellular matrix formation, and persistent infections. Conventional therapies such as skin substitutes or autologous skin grafts, in many cases, are unable to reestablish tissue homeostasis and proper healing. The development of innovative materials could induce a better regenerative healing response. In this study, we are reviewing different types of elastin-based materials for wound care application and their future prospects in regenerative medicine.

Development of a Mechanically Strong Nondegradable Protein Hydrogel with a Sponge-Like Morphology

Protein-based hydrogels are important functional materials with many potential applications. However, the relatively small pore size and poor mechanical properties substantially limit their application. Here a superporous bovine serum albumin (BSA) hydrogel is prepared with high porosity and interconnectivity by using BSA and 1,2,7,8-diepoxyoctane (DEO). The equilibrium water contents of hydrogels can reach 76.5%. Moreover, the BSA hydrogels show excellent mechanical properties and excellent deformation recoverability, with a maximum compression modulus of 50 MPa at 75% strain and no residual strain generated after 500 cyclic compression tests. The resulting BSA hydrogel has excellent biocompatibility for cell adherence and is nonbiodegradable for 40 weeks. More importantly, the BSA hydrogel exhibits excellent hemostatic ability, with hemostatic times in a rabbit ear artery and rabbit liver of 33 and 28 s, respectively. Therefore, BSA hydrogels have potential applications as painless nonadherent wound dressings and implant materials for plastic surgery.

Gelatine-based drug-eluting bandage contact lenses: Effect of PEGDA concentration and manufacturing technique

Drug-eluting bandage contact lenses (BCLs) have been widely studied as an alternative to eye drops due to their ability to increase the drug residence time and bioavailability as well as improve patient compliance. While silicone hydrogel polymers are commonly used in drug-eluting BCLs due to their transparency, mechanical properties and high oxygen permeability, gelatine hydrogels are also clear, flexible and have high oxygen permeability and may therefore be suitable contact lens materials. Moreover, the rheological properties of gelatine hydrogels allow their use as inks in extrusion-based 3D printers, therefore opening the door to a wide range of applications. Drug-loaded gelatine methacryloyl (GelMA) BCLs with different concentrations of poly (ethylene glycol) diacrylate (PEGDA) were prepared using solvent casting and 3D printing. The prepared lenses were characterised for their swelling ratio, in vitro degradation, and drug release properties. The results showed that the incorporation of 10% PEGDA improved the lenses' resistance to handling and protected them during degradation testing, reduced the swelling ratio and prolonged the release of dexamethasone (DEX). Both techniques were deemed suitable to use in the manufacturing of drug-eluting BCLs noting that the optimal formulation may vary according to the preparation technique utilised.

Significance of Crosslinking Approaches in the Development of Next Generation Hydrogels for Corneal Tissue Engineering

Medical conditions such as trachoma, keratoconus and Fuchs endothelial dystrophy can damage the cornea, leading to visual deterioration and blindness and necessitating a cornea transplant. Due to the shortage of donor corneas, hydrogels have been investigated as potential corneal replacements. A key factor that influences the physical and biochemical properties of these hydrogels is how they are crosslinked. In this paper, an overview is provided of different crosslinking techniques and crosslinking chemical additives that have been applied to hydrogels for the purposes of corneal tissue engineering, drug delivery or corneal repair. Factors that influence the success of a crosslinker are considered that include material composition, dosage, fabrication method, immunogenicity and toxicity. Different crosslinking techniques that have been used to develop injectable hydrogels for corneal regeneration are summarized. The limitations and future prospects of crosslinking strategies for use in corneal tissue engineering are discussed. It is demonstrated that the choice of crosslinking technique has a significant influence on the biocompatibility, mechanical properties and chemical structure of hydrogels that may be suitable for corneal tissue engineering and regenerative applications.

Effect of gelatin concentration on the characterizations and hemocompatibility of polyvinyl alcohol-gelatin hydrogel

BACKGROUND

The design and fabrication of hemocompatible and low-toxicity formulations remains a challenging task. Hydrogels are of considerable importance for biomedical applications since they are highly compatible with living tissue, both in vivo and in vitro.

OBJECTIVE

The present study aimed to develop and evaluate the characterizations and in vitro hemocompatibility of a hydrogel using polyvinyl alcohol and gelatin with different concentrations.

METHODS

The gelling process was realized by cross-linking the polyvinyl alcohol and gelatin. The morphological and structural examinations of the synthetic hydrogels were done by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). The swelling behavior of the prepared hydrogels in water was evaluated. Prothrombin time, activated partial thromboplastin time, and thrombin time were measured, and a hemolysis test was done to evaluate the hemocompatibility of prepared hydrogels.

RESULTS

The increase of the gelatin concentration in polyvinyl gelatin hydrogel increases the porosity and enhances the absorptivity of the prepared hydrogel. The measured hematological parameters indicated enhancement of hemocompatibility as the gelatin concentration was increased in the prepared hydrogel.

CONCLUSIONS

The results obtained from this study confirm that gelatin was able to improve the properties of the polyvinyl alcohol-gelatin hydrogel and enhance the hemocompatibility. Thus, the prepared hydrogel could be used in a variety of biomedical applications.

Degradable Hydrogels for the Delivery of Immune-modulatory Proteins in the Wound Environment

Chronic wounds represent a growing clinical problem for which limited treatment strategies exist. Defects in immune cell-mediated healing play an important role in chronic wound development, presenting an attractive clinical target in the treatment of chronic wounds. However, efforts to improve healing through the application of growth factors and cytokines have been limited by the rapid degradation and diffusion of these molecules in the wound environment. In this study we sought to overcome the challenge of rapid diffusion through the development of a hydrogel delivery system in which protein cargo can be released into the wound environment at a constant and tunable rate. This system was used to deliver the intercellular adhesion molecule-1 (ICAM-1) in order to target endogenous cells upstream of growth factor and cytokine production and circumvent the issue of their rapid degradation. We demonstrated that our delivery system was able to release cargo at different and highly controllable rates and thereby improved cargo retention in the wound environment. Additionally, treatment with ICAM-1 in the delivery system improved healing in both ICAM-1-deficient mice and an aged mouse model of delayed healing, highlighting a potential clinical benefit for this protein in the treatment of chronic wounds.

In situ hydrogel dressing loaded with heparin and basic fibroblast growth factor for accelerating wound healing in rat

In order to accelerate the healing of chronic wound, a hydrogel dressing encapsulating with heparin and basic fibroblast growth factor is prepared by the Michael addition of 4-arm acrylated polyethylene glycol and dithiothreitol. As-prepared hydrogel dressing can combine the advantages of wet healing theory and exogenous growth factor supplement. Furthermore, the encapsulated heparin can play a role in diminishing inflammation and accelerating wound healing in addition to its well-known function of stabilizing basic fibroblast growth factor. In vitro release test shows the hydrogel network is able to sustainably release basic fibroblast growth factor within 10 days by the regulation of heparin, while released growth factor can significantly promote fibroblast's proliferation in vitro. Moreover, the wound healing in rat shows that as-prepared hydrogel dressing could accelerate wound healing in vivo much more effectively compared with blank hydrogel dressing and negative control. Hematoxylin-eosin and Masson's Trichrome staining exhibit the formation of complete and uniform epidermis. Immunohistochemical staining exhibits heparin can help hydrogel dressing to possess low inflammation in early stage, which is beneficial for accelerating wound healing as well as preventing the production of scar tissue. The enzyme-linked immunosorbent assay results demonstrate the exogenous bFGF in hydrogel can significantly upgrade the expressing of vascular endothelial growth factor and transforming growth factor-β in wound site, which indicate better angiogenesis, and better on-site cell proliferation in wound site, respectively. Those results are further demonstrated by immunohistochemical and immunofluorescence staining. Consequently, as-prepared hydrogel dressing shows promising potential to perform better therapy efficacy in clinic for accelerating wound healing.

Epidermal growth factor in sacran hydrogel film accelerates fibroblast migration

Epidermal growth factor (EGF) accelerates epidermal regeneration, and it is widely studied as a wound-healing agent. However, the special carrier for the topical administration of EGF is urgently needed to deliver EGF on the wound site. In a preceding study, sacran hydrogel film (Sac-HF) showed a possible use as a dressing material for wound healing, as well as a good capability as a drug carrier. In the current study, we prepared Sac-HF containing EGF (Sac/EGF-HF) and then characterized their physicochemical properties, including thickness, swelling ratio, degradability, tensile strength, and morphology. In addition, we have also conducted thermal and crystallography studies using differential scanning calorimetry (DSC) and X-ray diffraction, respectively. Furthermore, we investigated the in vitro influence of Sac/EGF-HF on cell migration using a fibroblast cell line. Morphology study confirmed that the casting method used for the film preparation resulted in a homogeneous film of Sac/EGF-HF. Furthermore, EGF significantly increased the thickness, tensile strength, and degradability of Sac/EGF-HF compared to Sac-HF. Sac/EGF-HF had a lower swelling ability compared to Sac-HF; this result corroborated the tensile strength result. Interestingly, X-ray diffraction and DSC results showed that Sac/EGF-HF had an amorphous shape. The in vitro studies revealed that Sac/EGF-HF induced the fibroblast migration activity. These results conclude that Sac/EGF-HF has the potential properties of HF for biomedical applications.

Effect of epidermal growth factor ointment on persistent epithelial defects of the cornea

Background

Healthy corneal epithelium acts as a barrier against damage to the deeper structures in the eye. Failure in the mechanisms of corneal epithelization can lead to persistent epithelial defects of the cornea (PEDs) and can compromise its function. Epidermal growth factor (EGF) promotes the proliferation, migration, and differentiation of epithelial cells, endothelial cells, and fibroblasts during wound healing and may be beneficial in treating patients with PEDs. We, therefore, investigated the effect of EGF ointment on patients with PEDs.

Methods

Fifteen patients with PEDs refractory to conventional treatment were treated twice a day with EGF ointment. Patient demographics and comorbidities were noted. The epithelial healing time was determined along with the primary outcome measures in the areas of the epithelial defects, visual acuity, visual analog scale (VAS) scores, and esthesiometer scores 1 month and 2 months after treatment.

Results

Five eyes of herpetic keratitis (33.3%), 3 eyes of dry eye disease (20.0%), 3 eyes of bacterial keratitis (20.0%), 2 eyes of limbal stem cell deficiency (13.3%), 1 eye of diabetic neurotrophic keratitis (6.7%), and 1 eye of filamentary keratitis (6.7%) were associated with PEDs, respectively. Two months following treatment with EGF ointment, there was a reduction in the area of the epithelial defects (5.7 ± 3.9 to 0.1 ± 0.3 mm²) as well as a significant improvement in best-corrected visual acuity (0.9 ± 0.8 to 0.6 ± 0.5 LogMAR) and VAS scores (4.5 ± 1.2 to 2.5 ± 0.7) in 12 eyes (80%). Among these cases, the mean epithelial healing time was 5.5 ± 1.8 weeks. Amniotic membrane transplantation was performed on the remaining 3 (20.0%) patients that did not respond to EGF treatment.

Conclusions

EGF ointment could reduce symptoms and promotes corneal epithelialization of refractory PEDs. It may, therefore, be well-tolerated and a potentially beneficial addition in the management of refractory PEDs.

Biomaterials and controlled release strategy for epithelial wound healing

The skin and cornea are tissues that provide protective functions. Trauma and other environmental threats often cause injuries, infections and damage to these tissues, where the degree of injury is directly correlated to the recovery time. For example, a superficial skin or corneal wound may recover within days; however, more severe injuries can last up to several months and may leave scarring. Thus, therapeutic strategies have been introduced to enhance the wound healing efficiency and quality. Although the skin and cornea share similar anatomic structures and wound healing process, therapeutic agents and formulations for skin and cornea wound healing differ in accordance with the tissue and wound type. In this review, we describe the anatomy and epithelial wound healing processes of the skin and cornea, and summarize the therapeutic molecules that are beneficial to the respective regeneration process. In addition, biomaterial scaffolds that inherently possess bioactive properties or modified with therapeutic molecules for topical controlled release and enhanced wound healing efficiency are also discussed.

Application of polycaprolactone, chitosan, and collagen composite as a nanofibrous mat loaded with silver sulfadiazine and growth factors for wound dressing

Fabrication of nanofibrous biomaterials composed of natural and synthetic materials that incorporated with antibiotic and growth factors with controlled release manner is an attractive topic in wound healing. The purpose of this study was to prepare optimal composite of materials as biomimetic nanofibrous mats for application in wound healing. The mat was prepared of polycaprolactone (PCL) in the bottom, chitosan/poly ethylene oxide (Cs/PEO) in the middle, and PCL/collagen (PCL/Coll) in the top layer. A panel of standard characterization tests of nanofibrous mat was performed and its compatibilities in strength and integration were confirmed. Middle layer was loaded with epidermal growth factor (EGF) and basic fibroblast growth factor (bFGF), and silver sulfadiazine (SSD) was incorporated in the bottom layer as an anti-infection factor. Then, on the dorsum of rats, a 400-mm² wound was created and surrounded by a silicone ring to control the usual tissue contractions. Nanofibrous mats with or without growth factors were applied as wound dressings and at day 14, the healing process was evaluated. At day 14, the treated group by designed mat showed faster epithelialization and angiogenesis. Silicone ring in the test group was desirable in wound closure compared to the control group. Reformation of skin tissue was manifested in a shorter time. This composite nanofibrous mat could be introduced as a dynamic and effective candidate for wound dressing.

Injectable Macroporous Hydrogel Formed by Enzymatic Cross-Linking of Gelatin Microgels

Injectable hydrogels can be useful tools for facilitating wound healing since they conform to the irregular shapes of wounds, serving as a temporary matrix during the healing process. However, the lack of inherent pore structures of most injectable hydrogels prohibits desired interactions with the cells of the surrounding tissues limiting their clinical efficacy. Here, we introduce a simple, cost-effective and highly biofunctional injectable macroporous hydrogel made of gelatin microgels crosslinked by microbial transglutaminase (mTG). Pores are created by the interstitial space among the microgels. A water-in-oil emulsion technique was used to create gelatin microgels of an average size of 250μm in diameter. When crosslinked with mTG, the microgels adhered to each other to form a bulk hydrogel with inherent pores large enough for cell migration. The viscoelastic properties of the porous hydrogel were similar to those of nonporous gelatin hydrogel made by adding mTG to a homogeneous gelatin solution. The porous hydrogel supported higher cellular proliferation of human dermal fibroblasts (hDFs) than the nonporous hydrogel over two weeks, and allowed the migration of hDFs into the pores. Conversely, the hDFs were unable to permeate the surface of the nonporous hydrogel. To demonstrate its potential use in wound healing, the gelatin microgels were injected with mTG into a cut out section of an excised porcine cornea. Due to the action of mTG, the porous hydrogel stably adhered to the cornea tissue for two weeks. Confocal images showed that a large number of cells from the cornea tissue migrated into the interstitial space of the porous hydrogel. The porous hydrogel was also used for the controlled release of platelet-derived growth factor (PDGF), increasing the proliferation of hDFs compared to the nonporous hydrogel. This gelatin microgel-based porous hydrogel will be a useful tool for wound healing and tissue engineering.

A new nanoscale transdermal drug delivery system: oil body-linked oleosin-hEGF improves skin regeneration to accelerate wound healing

Background

Epidermal growth factor (EGF) can promote cell proliferation as well as migration, which is feasible in tissue wound healing. Oil bodies have been exploited as an important platform to produce exogenous proteins. The exogenous proteins were expressed in oil bodies from plant seeds. The process can reduce purification steps, thereby significantly reducing the purification cost. Mostly, the diameter of oil body particle ranges between 1.0 and 1.5 µm in the safflower seeds, however, it reduces to 700–1000 nm in the transgenic safflower seeds. The significant reduction of particle size in transgenic seeds is extremely beneficial to skin absorption.

Results

The diameter of oil body in the transgenic safflower seeds was recorded in the range of 700–1000 nm. The smaller particle size improved their skin absorption. The expression level of oleosin-hEGF-hEGF in T3 transgenic seeds was highest at 69.32 mg/g of seeds. The oil body expressing oleosin-hEGF-hEGF had significant proliferative activity on NIH/3T3 cells and improved skin regeneration thereby accelerating wound healing in rats. The wound coverage rate exceeded 98% after treatment for 14 days with oil body expressing oleosin-hEGF-hEGF, while the saline without EGF group and wild type oil body group both showed less than 80%. The neonatal fibroblast and collagen were found to be increased in the safflower oil body expressing oleosin-hEGF-hEGF treatment group. TGF-β1, bFGF and VEGF were noted as important growth factors in the repair of cutaneous wounds. Their expression level increased after 4 and 7 day treatment, but decreased after 14 days. Therefore, it can promote skin regeneration to accelerate wounds healing.

Conclusions

The expression of oleosin-hEGF-hEGF in T3 transgenic seeds was 80.43 ng/μL oil body. It had significant proliferative activity on NIH/3T3 cells and improved skin regeneration to accelerate wound healing in rats. The expression process of TGF-β1, bFGF and VEGF increased at first and then gradually declined.

Electronic supplementary material

The online version of this article (10.1186/s12951-018-0387-5) contains supplementary material, which is available to authorized users.

Bioactive scaffolds based on elastin-like materials for wound healing

Wound healing is a complex process that, in healthy tissues, starts immediately after the injury. Even though it is a natural well-orchestrated process, large trauma wounds, or injuries caused by acids or other chemicals, usually produce a non-elastic deformed tissue that not only have biological reduced properties but a clear aesthetic effect. One of the main drawbacks of the scaffolds used for wound dressing is the lack of elasticity, driving to non-elastic and contracted tissues. In the last decades, elastin based materials have gained in importance as biomaterials for tissue engineering applications due to their good cyto- and bio-compatibility, their ease handling and design, production and modification. Synthetic elastin or elastin like-peptides (ELPs) are the two main families of biomaterials that try to mimic the outstanding properties of natural elastin, elasticity amongst others; although there are no in vivo studies that clearly support that these two families of elastin based materials improve the elasticity of the artificial scaffolds and of the regenerated skin. Within the next pages a review of the different forms (coacervates, fibres, hydrogels and biofunctionalized surfaces) in which these two families of biomaterials can be processed to be applied in the wound healing field have been done. Here, we explore the mechanical and biological properties of these scaffolds as well as the different in vivo approaches in which these scaffolds have been used.

L. inermis-loaded nanofibrous scaffolds for wound dressing applications

Since ancient times, some herbal medicines have been extensively used for burn and wound treatments, showing preference to the common synthetic medications by virtue of having less side effects and faster healing rate. In this study, hybrid nanofibrous scaffolds of poly-l-lactic-acid (PLLA) and gelatin incorporated L. inermis were fabricated via electrospinning technique. Morphology and characteristics of the scaffolds were studied by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR), respectively. The release profile of the L. inermis from the nanofibers was also assessed in vitro. Moreover, the structural stability of the released L. inermis from the nanofibers was evaluated using high-performance liquid chromatography (HPLC). The nanofibers showed a gradual release of L. inermis up to two days while the intact structure was preserved. Furthermore, antibacterial assay demonstrated that L. inermis-loaded nanofibrous scaffolds could effectively kill E. coli and S. aureus within 2 h. Finally, biocompatibility of the nanofibers was proven on 3T3 fibroblasts. Therefore, the L. inermis loaded PLLA-Gelatin nanofibers showed a potential application as a wound dressing in order to control wound infections.

Controlled Release of Vascular Endothelial Growth Factor from Heparin-Functionalized Gelatin Type A and Albumin Hydrogels

Bio-based release systems for pro-angiogenic growth factors are of interest, to overcome insufficient vascularization and bio-integration of implants. In this study, we investigated heparin-functionalized hydrogels based on gelatin type A or albumin as storage and release systems for vascular endothelial growth factor (VEGF). The hydrogels were crosslinked using carbodiimide chemistry in presence of heparin. Heparin-functionalization of the hydrogels was monitored by critical electrolyte concentration (CEC) staining. The hydrogels were characterized in terms of swelling in buffer solution and VEGF-containing solutions, and their loading with and release of VEGF was monitored. The equilibrium degree of swelling (EDS) was lower for albumin-based gels compared to gelatin-based gels. EDS was adjustable with the used carbodiimide concentration for both biopolymers. Furthermore, VEGF-loading and release were dependent on the carbodiimide concentration and loading conditions for both biopolymers. Loading of albumin-based gels was higher compared to gelatin-based gels, and its burst release was lower. Finally, elevated cumulative VEGF release after 21 days was determined for albumin-based hydrogels compared to gelatin A-based hydrogels. We consider the characteristic net charges of the proteins and degradation of albumin during release time as reasons for the observed effects. Both heparin-functionalized biomaterial systems, chemically crosslinked gelatin type A or albumin, had tunable physicochemical properties, and can be considered for controlled delivery of the pro-angiogenic growth factor VEGF.

Mesoporous silica nanoparticles in injectable hydrogels: factors influencing cellular uptake and viability

The incorporation of nanoparticles as drug vectors into 3D scaffolds has attracted a lot of recent interest. In particular, tissue engineering applications would benefit from a spatially and temporally regulated release of biological cues, which act on precursor/stem cells in a three-dimensional growth environment. Injectable cell- and nanoparticle-containing scaffolds are especially interesting in this respect, but require matrix self-assembly and coordinated interactions between cells, matrices, and nanoparticles, which are largely uncharacterized yet. In this proof of concept study we combined the matrix-forming self-assembling peptide RADA16-I, different mesoporous silica nanoparticles (MSN) as potential drug carriers, and MC3T3-E1 osteoblast precursor cells. When injected to physiological media, the mixtures rapidly formed hybrid peptide-silica hydrogels containing RADA16-I nanofiber scaffolds with uniform spatial distribution of viable cells and MSN. MSN surface chemistry was critical for interactions within the hydrogel and for RADA16-I adsorption, thereby dominantly influencing cellular uptake and cell viability, whereas the impact of serum protein was minor. Thus, important parameters which allow tuning of nanoparticulate drug vector interactions with cells in injectable 3D scaffolds are identified, which are of importance for the future design of smart scaffolds for advanced tissue engineering in vivo.

Smart Carriers and Nanohealers: A Nanomedical Insight on Natural Polymers

Biodegradable polymers are popularly being used in an increasing number of fields in the past few decades. The popularity and favorability of these materials are due to their remarkable properties, enabling a wide range of applications and market requirements to be met. Polymer biodegradable systems are a promising arena of research for targeted and site-specific controlled drug delivery, for developing artificial limbs, 3D porous scaffolds for cellular regeneration or tissue engineering and biosensing applications. Several natural polymers have been identified, blended, functionalized and applied for designing nanoscaffolds and drug carriers as a prerequisite for enumerable bionano technological applications. Apart from these, natural polymers have been well studied and are widely used in material science and industrial fields. The present review explains the prominent features of commonly used natural polymers (polysaccharides and proteins) in various nanomedical applications and reveals the current status of the polymer research in bionanotechnology and science sectors.

Ultra thin hydro-films based on lactose-crosslinked fish gelatin for wound healing applications

This study focuses on the development and characterization of an ultra thin hydro-film based on lactose-mediated crosslinking of fish gelatin by Maillard reaction. Lactose results in the only efficient crosslinker able to produce resistant to handling hydro-films when compared to conventional crosslinkers such as glutaraldehyde or genipin (tested at 25 and 37°C in phosphate buffer saline solution (PBS)).The disappearance of the peak related to the N-containing groups (XPS) and the images obtained by SEM and AFM demonstrate the highly ordered nano-scaled structure of lactose-crosslinked gelatin, confirming the crosslinking efficiency. This dressing presents high hydrophilicity and mild occlusivity, as shown by the swelling curve (max swelling at 5min) and by the occlusion factor of 25.17±0.99%, respectively. It demonstrates high stability to hydrolysis or cell-mediated degradation. Moreover, ISO 10993-5:2009 biocompatibility assay results in undetectable cytotoxicity effects. Spreading, adhesion and proliferation assays confirm the excellent adaptability of the cells onto the hydro-film surface without invading the dressing. Finally, the hydro-film enables the controlled delivery of therapeutic factors, such as the epidermal growth factor (EGF). This study demonstrates that lactose-mediated crosslinking is able to produce ultra thin gelatin hydro-films with suitable properties for biomedical applications, such as wound healing.

Rapid In Situ MRI Traceable Gel-forming Dual-drug Delivery for Synergistic Therapy of Brain Tumor

Preventing tumor recurrence after surgical resection of a brain tumor is a significant clinical challenge because current methods deliver chemotherapeutic agents in a rapid manner and are not effective against the residual tumor cells. To overcome this drawback, we report a simple method to prepare magnetic resonance imaging (MRI) traceable ultra-thermosensitive hydrogels with rapid gelation ability from aqueous solution within 4 s at 28 °C for hydrophilic (epirubicin, EPI) and hydrophobic (paclitaxel, PTX) drugs co-delivery with bovine serum albumin nanoparticles (BSA NPs) incorporation. The results showed the average survival of gliosarcoma-bearing (MBR 614 or U87) mice receiving BSA/PTX NPs incorporated hydrogel_Gd/EPI increased to 63 days or 69 days with no tumor recurrence observed. Our synergistic strategy presents a new approach to the development of a local drug delivery system for the prevention of brain tumor recurrence.

Growth factor functionalized biomaterial for drug delivery and tissue regeneration

Elastin like polypeptides (ELPs) are a class of naturally derived and non-immunogenic biomaterials that are widely used in drug delivery and tissue engineering. ELPs undergo temperature-mediated inverse phase transitioning, which allows them to be purified in a relatively simple manner from bacterial expression hosts. Being able to genetically encode ELPs allows for the incorporation of bioactive peptides thereby functionalizing them. Here we report the synthesis of a biologically active epidermal growth factor-ELP (EGF-ELP) fusion protein that could aid in wound healing. EGF plays a crucial role in wound healing by inducing cell proliferation and migration. The use of exogenous EGF has seen success in the treatment of acute wounds, but has seen relatively minimal success in chronic wounds because the method of delivery does not prevent it from diffusing away from the application site. Our data shows that EGF-ELP retained the biological activity of EGF and the phase transitioning property of ELP. Furthermore, the ability of the EGF-ELP to self-assemble near physiological temperatures could allow for the formation of drug depots at the wound site and minimize diffusion, increasing the bioavailability of EGF and enhancing tissue regeneration.

Biohybrid methacrylated gelatin/polyacrylamide hydrogels for cartilage repair

We prepared a biohybrid hydrogel based on acrylamide and GelMA, having good mechanical properties, thermal stability, and bioactivity for cartilage regeneration.