Layer-by-layer assembly of biologically inert inorganic ions/DNA multilayer films for tunable DNA release by chelation

Biofunctional coatings and drug-coated stents for restenosis therapy

Palliative therapy utilizing interventional stents, such as vascular stents, biliary stents, esophageal stents, and other stents, has been a prevalent clinical strategy for treating duct narrowing and partial blockage. However, stent restenosis after implantation usually significantly compromises therapeutic efficacy and patient safety. Clinically, vascular stent restenosis is primarily attributed to endothelial hyperplasia and coagulation, while the risk of biliary stent occlusion is heightened by bacterial adhesion and bile sludge accumulation. Similarly, granulation tissue hyperplasia leads to tracheal stent restenosis. To address these issues, surface modifications of stents are extensively adopted as effective strategies to reduce the probability of restenosis and extend their functional lifespan. Applying coatings is one of the technical routes involving a complex selection of materials, drug loading capacities, release rates, and other factors. This paper provides an extensive overview of state of the art drug-coated stents, addressing both challenges and future prospects in this domain. We aim to contribute positively to the ongoing development and potential clinical applications of drug-coated stents in interventional therapy.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Electrostatic Assembly Technique for Novel Composites Fabrication

Electrostatic assembly is one of the bottom–up approaches used for multiscale composite fabrication. Since its discovery, this method has been actively used in molecular bioscience as well as materials design and fabrication for various applications. Despite the recent advances and controlled assembly reported using electrostatic interaction, the method still possesses vast potentials for various materials design and fabrication. This review article is a timely revisit of the electrostatic assembly method with a brief introduction of the method followed by surveys of recent advances and applications of the composites fabricated. Emphasis is also given to the significant potential of this method for advanced materials and composite fabrication in line with sustainable development goals. Prospective outlook and future developments for micro-/nanocomposite materials fabrication for emerging applications such as energy-related fields and additive manufacturing are also mentioned.

Electrochemically stimulated molecule release associated with interfacial pH changes

Molecular release was activated with an electrochemical signal, resulting in the hydrolysis of a linker.

DNA Computing Systems Activated by Electrochemically-triggered DNA Release from a Polymer-brush-modified Electrode Array

An array of four independently wired indium tin oxide (ITO) electrodes was used for electrochemically stimulated DNA release and activation of DNA-based Identity, AND and XOR logic gates. Single-stranded DNA molecules were loaded on the mixed poly(N,N-di-methylaminoethyl methacrylate) (PDMAEMA)/poly-(methacrylic acid) (PMAA) brush covalently attached to the ITO electrodes. The DNA deposition was performed at pH 5.0 when the polymer brush is positively charged due to protonation of tertiary amino groups in PDMAE-MA, thus resulting in electrostatic attraction of the negatively charged DNA. By applying electrolysis at -1.0 V(vs. Ag/AgCl reference) electrochemical oxygen reduction resulted in the consumption of hydrogen ions and local pH increase near the electrode surface. The process resulted in recharging the polymer brush to the negative state due to dissociation of carboxylic groups of PMAA, thus repulsing the negatively charged DNA and releasing it from the electrode surface. The DNA release was performed in various combinations from different electrodes in the array assembly. The released DNA operated as input signals for activation of the Boolean logic gates. The developed system represents a step forward in DNA computing, combining for the first time DNA chemical processes with electronic input signals.

In situ study of self-assembled nanocomposite films by spectral SPR sensor

Spectral surface plasmon resonance (SPR) sensor with a time-resolved charge-coupled device (CCD) detector is a powerful analytical tool for label-free detection of biomolecular interaction at the liquid/solid interface and for in situ study of molecular adsorption behavior. In this work, the layer-by-layer self-assembly processes for three nanocomposite films were monitored in real time using a broadband spectral SPR sensor with a large dynamic range. Kinetics studies suggest that cytochrome c (Cyt c) and deoxy ribonucleic acid (DNA) adsorptions obey the Langmuir-isotherm theory, while gold nanoparticle (GNP) adsorption follows the Diffusion-controlled model. Using poly(sodium 4-styrenesulfonate) (PSS) and poly(dimethyldiallylammonium chloride) (PDDA) as the positively charged agents, three kinds of multilayer films such as the PSS/Cyt c, GNP/Cyt c and PDDA/DNA binary nanocomposites were fabricated on the SPR chips by the electrostatic attraction based on self-assemble. The SPR response in terms of ΔλR was measured to linear increase with increasing the number of layers for a six-bilayer PSS/Cyt c nanocomposite film, indicating that every PSS/Cyt c layer has equal mass coverage. In contrast, the nonlinear dependences of ΔλR on the number of bilayers were observed for the GNP/Cyt c and PDDA/DNA nanocomposite multilayer films.

Molecular motions in functional self-assembled nanostructures

The construction of "smart" materials able to perform specific functions at the molecular scale through the application of various stimuli is highly attractive but still challenging. The most recent applications indicate that the outstanding flexibility of self-assembled architectures can be employed as a powerful tool for the development of innovative molecular devices, functional surfaces and smart nanomaterials. Structural flexibility of these materials is known to be conferred by weak intermolecular forces involved in self-assembly strategies. However, some fundamental mechanisms responsible for conformational lability remain unexplored. Furthermore, the role played by stronger bonds, such as coordination, ionic and covalent bonding, is sometimes neglected while they can be employed readily to produce mechanically robust but also chemically reversible structures. In this review, recent applications of structural flexibility and molecular motions in self-assembled nanostructures are discussed. Special focus is given to advanced materials exhibiting significant performance changes after an external stimulus is applied, such as light exposure, pH variation, heat treatment or electromagnetic field. The crucial role played by strong intra- and weak intermolecular interactions on structural lability and responsiveness is highlighted.

Polymer-metal complexes in polyelectrolyte multilayer films as catalysts for oxidation of toluene

We report on the binding of metal ions (Me(2+); Co(2+) and Cu(2+)) with weak polyelectrolyte multilayers (PEMs), as well as on catalytic activity of PEM-Me(2+) films for oxidation of toluene. Using several types of PEM films constructed using branched polyethyleneimine (BPEI) or quaterinized poly-4-vinylpyridines (QPVPs) as polycations and poly(acrylic acid) (PAA) or poly(styrene sulfonate) (PSS) as polyanions, we found that binding of Co(2+) and Cu(2+) ions with a PEM matrix can occur both through coordination to polycationic amino groups and/or ionic binding to polyacid groups. The amount of metal ions loaded within the film increased linearly with film thickness and was strongly dependent on polyelectrolyte type, film assembly pH, and fraction of permanent charge in polymer chains. Among various PEM-Me(2+) systems, BPEI/PAA-Co(2+) films assembled at pH 8.5 show the best catalytic performance, probably because of the preservation of high mobility of Co(2+) ions coordinated to amino groups of BPEI in these films. With BPEI/PAA-Co(2+) films, we demonstrated that films were highly permeable to reagents and reaction products within hundreds of nanometers of the film bulk; i.e., film catalytic activity increased linearly with layer number up to 30 bilayers and slowed for thicker films.

Nanomaterials for regenerative medicine

The application of nanotechnology has opened a new realm of advancement in the field of regenerative medicine and has provided hope for the culmination of long-felt needs by the development of an ideal means to control the biochemical and mechanical microenvironment for successful cell delivery and tissue regeneration. Both top-down and bottom-up approaches have been widely used in the advancement of this field, be it by improvement in scaffolds for cell growth, development of new and efficient delivery devices, cellular modification and tracking applications or by development of nanodevices such as biosensors. The current review elaborates the various nanomaterials used in regenerative medicine with a special focus on the development of this field during the last 5 years and the recent advances in their aforementioned applications. Furthermore, the key issues and challenges in using nanotechnology-based approaches are highlighted with an outlook on the likely future of nano-assisted regenerative medicine.

Layer-by-layer assembly of poly(lactic acid) nanoparticles: a facile way to fabricate films for model drug delivery

Layer-by-layer (LBL) films of poly(lactic acid) nanoparticles (PLA NPs) and poly(ethyleneimine) (PEI) were fabricated as a novel drug-delivery system. The PLA NPs, which encapsulated pyrene as a model drug, were prepared by nanoprecipitation methods. The assembly process of PLA NPs/PEI LBL films was monitored by UV-vis spectroscopy, and the load of pyrene in the multilayer films was verified by fluorescence spectroscopy. The morphology of the PLA NPs/PEI LBL films was observed by SEM. The release profile of pyrene from the LBL films in PBS solutions was further studied, and the result indicated that the PLA NPs/PEI films were capable of sustainably releasing pyrene as expected. The fabrication of PLA NPs/PEI LBL films provides a new facile method for drug delivery and paves the way for loading multiple types of drugs into a single LBL film.