The synergetic bone-forming effects of combinations of growth factors expressed by adenovirus vectors on chitosan/collagen scaffolds

The role of natural polymers in bone tissue engineering

Bone is a dynamic self-healing organ and a continuous remodeling ensures the restoration of the bone structure and function over time. However, bone remodeling is not able to repair large traumatic injuries. Therefore, surgical interventions and bone substitutes are required. The aim of bone tissue engineering is to repair and regenerate tissues and engineered a bone graft as a bone substitute. To met this goal, several natural or synthetic polymers have been used to develop a biocompatible and biodegradable polymeric construct. Among the polymers, natural polymers have higher biocompatibility, excellent biodegradability, and no toxicity. So far, collagen, chitosan, gelatin, silk fibroin, alginate, cellulose, and starch, alone or in combination, have been widely used in bone tissue engineering. These polymers have been used as scaffolds, hydrogels, and micro-nanospheres. The functionalization of the polymer with growth factors and bioactive glasses increases the potential use of polymers for bone regeneration. As bone is a dynamic highly vascularized tissue, the vascularization of the polymeric scaffolds is vital for successful bone regeneration. Several in vivo and in vitro strategies have been used to vascularize the polymeric scaffolds. In this review, the application of the most commonly used natural polymers is discussed.

Role of rhBMP-7, Fibronectin, And Type I Collagen in Dental Implant Osseointegration Process: An Initial Pilot Study on Minipig Animals

Background: The biological factors involved in dental implant osseointegration need to be investigated to improve implant success. Methods: Twenty-four implants were inserted into the tibias of six minipigs. Bone samples were obtained at 7, 14, and 56 days. Biomolecular analyses evaluated mRNA of BMP-4, -7, Transforming Growth Factor-β2, Interleukin-1β, and Osteocalcin in sites treated with rhBMP-7, Type 1 Collagen, or Fibronectin (FN). Inflammation and osteogenesis were evaluated by histological analyses. Results: At 7 and 14 days, BMP-4 and BMP-7 increased in the sites prepared with rhBMP-7 and FN. BMP-7 remained greater at 56 days in rhBMP-7 and FN sites. BPM-4 at 7 and 14 days increased in Type 1 Collagen sites; BMP-7 increased from day 14. FN increased the TGF-β2 at all experimental times, whilst the rhBMP-7 only did so up to 7 days. IL-1β increased only in collagen-treated sites from 14 days. Osteocalcin was high in FN-treated sites. Neutrophilic granulocytes characterized the inflammatory infiltrate at 7 days, and mononuclear cells at 14 and 56 days. Conclusions: This initial pilot study, in a novel way, evidenced that Type 1 Collagen induced inflammation and did not stimulate bone production; conversely FN or rhBMP-7 showed neo-osteogenetic and anti-inflammatory properties when directly added into implant bone site.

Systematic Review of the Preclinical Technology Readiness of Orthopedic Gene Therapy and Outlook for Clinical Translation

Bone defects and improper healing of fractures are an increasing public health burden, and there is an unmet clinical need in their successful repair. Gene therapy has been proposed as a possible approach to improve or augment bone healing with the potential to provide true functional regeneration. While large numbers of studies have been performed in vitro or in vivo in small animal models that support the use of gene therapy for bone repair, these systems do not recapitulate several key features of a critical or complex fracture environment. Larger animal models are therefore a key step on the path to clinical translation of the technology. Herein, the current state of orthopedic gene therapy research in preclinical large animal models was investigated based on performed large animal studies. A summary and an outlook regarding current clinical studies in this sector are provided. It was found that the results found in the current research literature were generally positive but highly methodologically inconsistent, rendering a comparison difficult. Additionally, factors vital for translation have not been thoroughly addressed in these model systems, and the risk of bias was high in all reviewed publications. These limitations directly impact clinical translation of gene therapeutic approaches due to lack of comparability, inability to demonstrate non-inferiority or equivalence compared with current clinical standards, and lack of safety data. This review therefore aims to provide a current overview of ongoing preclinical and clinical work, potential bottlenecks in preclinical studies and for translation, and recommendations to overcome these to enable future deployment of this promising technology to the clinical setting.

Application of Chitosan in Bone and Dental Engineering

Chitosan is a deacetylated polysaccharide from chitin, the natural biopolymer primarily found in shells of marine crustaceans and fungi cell walls. Upon deacetylation, the protonation of free amino groups of the d-glucosamine residues of chitosan turns it into a polycation, which can easily interact with DNA, proteins, lipids, or negatively charged synthetic polymers. This positive-charged characteristic of chitosan not only increases its solubility, biodegradability, and biocompatibility, but also directly contributes to the muco-adhesion, hemostasis, and antimicrobial properties of chitosan. Combined with its low-cost and economic nature, chitosan has been extensively studied and widely used in biopharmaceutical and biomedical applications for several decades. In this review, we summarize the current chitosan-based applications for bone and dental engineering. Combining chitosan-based scaffolds with other nature or synthetic polymers and biomaterials induces their mechanical properties and bioactivities, as well as promoting osteogenesis. Incorporating the bioactive molecules into these biocomposite scaffolds accelerates new bone regeneration and enhances neovascularization in vivo.

Matrix Mediated Viral Gene Delivery: A Review

Polymeric matrices inherently protect viral vectors from pre-existing immune conditions, limit dissemination to off-target sites, and can sustain vector release. Advancing methodologies in development of particulate based vehicles have led to improved encapsulation of viral vectors. Polymeric delivery systems have contributed to increasing cellular transduction, responsive release mechanisms, cellular infiltration, and cellular signaling. Synthetic polymers are easily customizable, and are capable of balancing matrix retention with cellular infiltration. Natural polymers contain inherent biorecognizable motifs adding therapeutic efficacy to the incorporated viral vector. Recombinant polymers use highly conserved motifs to carefully engineer matrices, allowing for precise design including elements of vector retention and responsive release mechanisms. Composite polymer systems provide opportunities to create matrices with unique properties. Carefully designed matrices can control spatiotemporal release patterns that synergize with approaches in regenerative medicine and antitumor therapies.

Micropatterned Scaffolds with Immobilized Growth Factor Genes Regenerate Bone and Periodontal Ligament-Like Tissues

Periodontal disease destroys supporting structures of teeth. However, tissue engineering strategies offer potential to enhance regeneration. Here, the strategies of patterned topography, spatiotemporally controlled growth factor gene delivery, and cell-based therapy to repair bone-periodontal ligament (PDL) interfaces are combined. Micropatterned scaffolds are fabricated for the ligament regions using polycaprolactone (PCL)/polylactic-co-glycolic acid and combined with amorphous PCL scaffolds for the bone region. Scaffolds are modified using chemical vapor deposition, followed by spatially controlled immobilization of vectors encoding either platelet-derived growth factor-BB or bone morphogenetic protein-7, respectively. The scaffolds are seeded with human cells and delivered to large alveolar bone defects in athymic rats. The effects of dual and single gene delivery with and without micropatterning are assessed after 3, 6, and 9 weeks. Gene delivery results in greater bone formation at three weeks. Micropatterning results in regenerated ligamentous tissues similar to native PDL. The combination results in more mature expression of collagen III and periostin, and with elastic moduli of regenerated tissues that are statistically indistinguishable from those of native tissue, while controls are less stiff than native tissues. Thus, controlled scaffold microtopography combined with localized growth factor gene delivery improves the regeneration of periodontal bone-PDL interfaces.

Gene Therapy for Bone Defects in Oral and Maxillofacial Surgery: A Systematic Review and Meta-Analysis of Animal Studies

Craniofacial bone defects are challenging problems for maxillofacial surgeons over the years. With the development of cell and molecular biology, gene therapy is a breaking new technology with the aim of regenerating tissues by acting as a delivery system for therapeutic genes in the craniofacial region rather than treating genetic disorders. A systematic review was conducted summarizing the articles reporting gene therapy in maxillofacial surgery to answer the question: Was gene therapy successfully applied to regenerate bone in the maxillofacial region? Electronic searching of online databases was performed in addition to hand searching of the references of included articles. No language or time restrictions were enforced. Meta-analysis was done to assess significant bone formation after delivery of gene material in the surgically induced maxillofacial defects. The search identified 2081 articles, of which 57 were included with 1726 animals. Bone morphogenetic proteins were commonly used proteins for gene therapy. Viral vectors were the universally used vectors. Sprague-Dawley rats were the frequently used animal model in experimental studies. The quality of the articles ranged from excellent to average. Meta-analysis results performed on 21 articles showed that defects favored bone formation by gene therapy. Funnel plot showed symmetry with the absence of publication bias. Gene therapy is on the top list of innovative strategies that developed in the last 10 years with the hope of developing a simple chair-side protocol in the near future, combining improvement of gene delivery as well as knowledge of the molecular basis of oral and maxillofacial structures.

Delivering Nucleic-Acid Based Nanomedicines on Biomaterial Scaffolds for Orthopedic Tissue Repair: Challenges, Progress and Future Perspectives

As well as acting to fill defects and allow for cell infiltration and proliferation in regenerative medicine, biomaterial scaffolds can also act as carriers for therapeutics, further enhancing their efficacy. Drug and protein delivery on scaffolds have shown potential, however, supraphysiological quantities of therapeutic are often released at the defect site, causing off-target side effects and cytotoxicity. Gene therapy involves the introduction of foreign genes into a cell in order to exert an effect; either replacing a missing gene or modulating expression of a protein. State of the art gene therapy also encompasses manipulation of the transcriptome by harnessing RNA interference (RNAi) therapy. The delivery of nucleic acid nanomedicines on biomaterial scaffolds - gene-activated scaffolds -has shown potential for use in a variety of tissue engineering applications, but as of yet, have not reached clinical use. The current state of the art in terms of biomaterial scaffolds and delivery vector materials for gene therapy is reviewed, and the limitations of current procedures discussed. Future directions in the clinical translation of gene-activated scaffolds are also considered, with a particular focus on bone and cartilage tissue regeneration.

Multigrowth Factor Delivery via Immobilization of Gene Therapy Vectors

Molecules can be immobilized onto biomaterials by a chemical vapor deposition (CVD) coating strategy. Pentafluorophenolester groups react with amine side chains on antibodies, which can selectively immobilize adenoviral vectors for gene delivery of growth factors. These vectors can produce functional proteins within defined regions of biomaterials to produce customizable structures for targeted tissue regeneration.

Gene therapy for bone tissue engineering

Gene therapy holds a great promise and has been extensively investigated to improve bone formation and regeneration therapies in bone tissue engineering. A variety of osteogenic genes can be delivered by combining different vectors (viral or non-viral), scaffolds and delivery methodologies. Ex vivo & in vivo gene enhanced tissue engineering approaches have led to successful osteogenic differentiation and bone formation. In this article, we review recent advances of gene therapy-based bone tissue engineering discussing strengths and weaknesses of various strategies as well as general overview of gene therapy.

Prospects of chitosan-based scaffolds for growth factor release in tissue engineering

Tissue engineering is concerned about the rejuvenation and restoration of diseased and damages tissues/organs using man-made scaffolds that mimic the native environment of the cells. In recent years, a variety of biocompatible and biodegradable natural materials is employed for the fabrication of such scaffolds. Of these natural materials, chitosan is the most preferred one as it imitates the extracellular matrix (ECM) of the cells. Moreover, chitosan-based materials are pro-angiogenic and have antibacterial activity. These materials can be easily fabricated into the desired shape of the scaffolds that are suitable for tissue support and regeneration. Growth factors are small proteins/peptides that support and enhance the growth and differentiation of cells into a specific lineage. It has been observed that scaffolds capable of delivering growth factor promote tissue repair and regeneration at a faster rate when compared to scaffolds without growth factor. The present review focuses on the recent developments on chitosan-based scaffolds for the delivery of growth factors thereby improving and enhancing tissue regeneration.

Importance of dual delivery systems for bone tissue engineering

Bone formation is a complex process that requires concerted function of multiple growth factors. For this, it is essential to design a delivery system with the ability to load multiple growth factors in order to mimic the natural microenvironment for bone tissue formation. However, the short half-lives of growth factors, their relatively large size, slow tissue penetration, and high toxicity suggest that conventional routes of administration are unlikely to be effective. Therefore, it seems that using multiple bioactive factors in different delivery systems can develop new strategies for improving bone tissue regeneration. Combination of these factors along with biomaterials that permit tunable release profiles would help to achieve truly spatiotemporal regulation during delivery. This review summarizes the various dual-control release systems that are used for bone tissue engineering.

The effect of BMP-7 gene activated muscle tissue implants on the repair of large segmental bone defects

BACKGROUND

This study was conducted in order to investigate the effect of Bone Morphogenetic Protein-7 (BMP-7) transduced muscle cells on bone formation and to further develop an innovative abbreviated ex vivo gene therapy for bone repair. As conventional ex vivo gene therapy methods require an elaborative and time-consuming extraction and expansion of cells we evaluated an expedited approach. Fragments of muscle tissue were directly activated by BMP-7 cDNA and implanted into bone defects.

METHODS

25 male, syngeneic Fischer 344 rats were used in the present study. Muscle tissue was harvested from two donor rats and either transduced with an adenovirus carrying the BMP-7 cDNA or remained unmodified. 5mm osseous defects in the right femora of 23 rats were treated with either unmodified muscle tissue (control group) or BMP-7 activated muscle tissue (treatment group). Six weeks after surgery, rat femora were evaluated by radiographs, micro-computed tomography (μCT) and histology.

RESULTS

Implantation of BMP-7 activated muscle grafts led to bony bridging in 5 out of 12 defects (41.7%) and to bone formation without bridging in 2 out of 12 defects. In 2 femoral defects of this group radiographs, μCT-imaging and histology did not reveal significant mineralization. Three animals of the BMP-7 treatment group had to be euthanized due to serious wound infection. The bone volume of the treatment group was significantly (p=0.007) higher compared to the control group.

CONCLUSION

This study shows that BMP-7 gene activated muscle fragments have the potential to regenerate critical-size segmental bone defects in rats. However, further development of this promising expedited treatment modality is required to improve the healing rate and to investigate if the high infection rate is related to treatment with BMP-7 activated muscle grafts.

Advanced biomaterials and their potential applications in the treatment of periodontal disease

Periodontal disease is considered as a widespread infectious disease and the most common cause of tooth loss in adults. Attempts for developing periodontal disease treatment strategies, including drug delivery and regeneration approaches, provide a useful experimental model for the evaluation of future periodontal therapies. Recently, emerging advanced biomaterials including hydrogels, films, micro/nanofibers and particles, hold great potential to be utilized as cell/drug carriers for local drug delivery and biomimetic scaffolds for future regeneration therapies. In this review, first, we describe the pathogenesis of periodontal disease, including plaque formation, immune response and inflammatory reactions caused by bacteria. Second, periodontal therapy and an overview of current biomaterials in periodontal regenerative medicine have been discussed. Third, the roles of state-of-the-art biomaterials, including hydrogels, films, micro/nanofibers and micro/nanoparticles, developed for periodontal disease treatment and periodontal tissue regeneration, and their fabrication methods, have been presented. Finally, biological properties, including biocompatibility, biodegradability and immunogenicity of the biomaterials, together with their current applications strategies are given. Conclusive remarks and future perspectives for such advanced biomaterials are discussed.

Chitosan-based scaffolds for bone tissue engineering

Bone defects requiring grafts to promote healing are frequently occurring and costly problems in health care. Chitosan, a biodegradable, naturally occurring polymer, has drawn considerable attention in recent years as scaffolding material in tissue engineering and regenerative medicine. Chitosan is especially attractive as a bone scaffold material because it supports the attachment and proliferation of osteoblast cells as well as formation of mineralized bone matrix. In this review, we discuss the fundamentals of bone tissue engineering and the unique properties of chitosan as a scaffolding material to treat bone defects for hard tissue regeneration. We present the common methods for fabrication and characterization of chitosan scaffolds, and discuss the influence of material preparation and addition of polymeric or ceramic components or biomolecules on chitosan scaffold properties such as mechanical strength, structural integrity, and functional bone regeneration. Finally, we highlight recent advances in development of chitosan-based scaffolds with enhanced bone regeneration capability.

Realizing the potential of gene-based molecular therapies in bone repair

A better understanding of osteogenesis at genetic and biochemical levels is yielding new molecular entities that can modulate bone regeneration and potentially act as novel therapies in a clinical setting. These new entities are motivating alternative approaches for bone repair by utilizing DNA-derived expression systems, as well as RNA-based regulatory molecules controlling the fate of cells involved in osteogenesis. These sophisticated mediators of osteogenesis, however, pose unique delivery challenges that are not obvious in deployment of conventional therapeutic agents. Viral and nonviral delivery systems are actively pursued in preclinical animal models to realize the potential of the gene-based medicines. This article will summarize promising bone-inducing molecular agents on the horizon as well as provide a critical review of delivery systems employed for their administration. Special attention was paid to synthetic (nonviral) delivery systems because they are more likely to be adopted for clinical testing because of safety considerations. We present a comparative analysis of dose-response relationships, as well as pharmacokinetic and pharmacodynamic features of various approaches, with the purpose of clearly defining the current frontier in the field. We conclude with the authors' perspective on the future of gene-based therapy of bone defects, articulating promising research avenues to advance the field of clinical bone repair.

Platelet-derived growth factor BB gene-released scaffolds: biosynthesis and characterization

Tissue engineering generally requires three basic elements; stem/progenitor cells, inductive agents and a biomaterial scaffold; the latter is one of the key components which directly influences cellular activity and matrix formation. Commonly used scaffolds to repair defects in general do not induce stem cell recruitment, which is an essential element to tissue regeneration. In this study, fabrication of a scaffold which is capable of restoring damaged tissue through the recruitment of mesenchymal stem cells (MSCs) by gene therapy of the gene encoding platelet-derived growth factor-B (PDGF-B) was investigated. PDGF-B adenovirus (AdPDGF) was combined into novel mesoporous bioglass-silk fibrin scaffolds, which were characterized for their controlled release and sustained bioactivity. Our results demonstrate that these scaffolds can release PDGF-B adenovirus for up to 3 weeks and increase MSC recruitment, both in vitro and following subcutaneous implantation in mice. Osseous calvarial defects in mice further demonstrate the ability of these scaffolds to enhance tissue regeneration through stem cell homing. This study demonstrates the potent ability of host stem cells to regenerate tissue defects through recruitment of MSCs via gene therapy. Copyright © 2013 John Wiley & Sons, Ltd.

Tissue-engineered mandibular bone reconstruction for continuity defects: a systematic approach to the literature

BACKGROUND

Despite significant surgical advances over the last decades, segmental mandibular bone repair remains a challenge. In light of this, tissue engineering might offer a next step in the evolution of mandibular reconstruction.

PURPOSE

The purpose of the present report was to (1) systematically review preclinical in vivo as well as clinical literature regarding bone tissue engineering for mandibular continuity defects, and (2) to analyze their effectiveness.

MATERIALS AND METHODS

An electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge was carried out. Only publications in English were considered, and the search was broadened to animals and humans. Furthermore, the reference lists of related review articles and publications selected for inclusion in this review were systematically screened. Results of histology data and amount of bone bridging were chosen as primary outcome variables. However, for human reports, clinical radiographic evidence was accepted for defined primary outcome variable. The biomechanical properties, scaffold degradation, and clinical wound healing were selected as co-outcome variables.

RESULTS

The electronic search in the databases of the National Library of Medicine and ISI Web of Knowledge resulted in the identification of 6727 and 5017 titles, respectively. Thereafter, title assessment and hand search resulted in 128 abstracts, 101 full-text articles, and 29 scientific papers reporting on animal experiments as well as 11 papers presenting human data on the subject of tissue-engineered reconstruction of mandibular continuity defects that could be included in the present review.

CONCLUSIONS

It was concluded that (1) published preclinical in vivo as well as clinical data are limited, and (2) tissue-engineered approaches demonstrate some clinical potential as an alternative to autogenous bone grafting.

The promotion of bone regeneration through positive regulation of angiogenic-osteogenic coupling using microRNA-26a

Bone is highly vascularized tissue reliant on coordinated coupling between angiogenesis and osteogenesis to regenerate. Delivery of a combination of growth factors involved in the coupling has to some extent enhanced bone regeneration. However, the stimulation may interrupt the balance of bone and vessel remodeling leading to the excessive bone formation or vascular leakage. MicroRNAs function as potent molecular managers that may simultaneously regulate multiple endogenous signaling pathways. Delivery of microRNA may provide a way to maximally mimic the native bone development environment. In this work, we identified an miRNA, miR-26a in vitro assays that positively regulates angiogenesis-osteogenesis coupling. This resulted in enhanced bone formation coordinated with vascularization in mouse subcutaneous assay. Furthermore, we constructed an miRNA enhancer delivery system to enhance miR-26a expression in a localized and sustained manner in vivo. We found that the system led to complete repair of the critical-size calvarial bone defect and increased vascularization accordingly. Host specific real-time PCR test of the neo-formed bone demonstrated that miR-26a optimized bone regeneration mainly due to simultaneously regulating endogenous angiogenesis-osteogenesis coupling. We anticipated our assay providing evidence that miRNA-based therapy can be a valuable tool to promote bone regeneration.

Therapeutic targeting of chitosan-PEG-folate-complexed oncolytic adenovirus for active and systemic cancer gene therapy

Adenovirus (Ad)-based cancer therapies have shown much promise. However, until now, Ad has only been delivered directly to primary tumors because the therapeutic efficacy of systemic delivery is limited by the immune response of the host, short blood circulation times, and non-specific liver uptake of Ad. In order to circumvent the issues regarding systemic delivery and to increase the safety and efficacy of Ad therapies, the surface of oncolytic Ad was coated with cationic polymer chitosan via ionic crosslinking (Ad/chitosan), after which polyethylene glycol (PEG) and/or folic acid (FA) was chemically conjugated onto the surface of Ad/chitosan, generating Ad/chitosan-FA, Ad/chitosan-PEG, and Ad/chitosan-PEG-FA nanocomplex. The FA-coordinated Ad nanocomplexes (Ad/chitosan-FA & Ad/chitosan-PEG-FA) elicited folate receptor (FR)-selective cancer cell killing efficacy. In vivo administration of Ad/chitosan-PEG or Ad/chitosan-PEG-FA into mice demonstrated that PEGylation greatly increased blood circulation time, resulting in 9.0-fold and 48.9-fold increases at 24h after injection compared with naked Ad, respectively. In addition, generation of Ad-specific neutralizing antibodies in mice treated with Ad/chitosan-PEG-FA was markedly decreased by 75.3% compared with naked Ad. The quantitative polymerase chain reaction assay results showed a 285.0-fold increase in tumor tissues and a 378-fold reduction of Ad/chitosan-PEG-FA in liver tissues compared with naked Ad. Bioluminescence imaging study further supported the enhanced tumor-to-liver ratio of Ad/chitosan-PEG-FA. Consequently, systemic delivery of Ad/chitosan-PEG-FA significantly inhibited the growth of FR-positive tumor, decreasing 52.8% compared to the naked Ad-treated group. Importantly, PEGylated oncolytic Ad nanocomplexes showed no elevation of both alanine transaminase and aspartate transaminase levels, demonstrating that systemically delivered Ad-related hepatic damage can be completely eliminated with PEG conjugation. In sum, these results demonstrate that conjugation of chitosan-PEG-FA to oncolytic Ad significantly improves antitumor efficacy and safety profiles, suggesting that Ad/chitosan-PEG-FA has potential as a therapeutic agent to target FR-positive cancer via systemic administration.

Controlled release strategies for bone, cartilage, and osteochondral engineering--Part II: challenges on the evolution from single to multiple bioactive factor delivery

The development of controlled release systems for the regeneration of bone, cartilage, and osteochondral interface is one of the hot topics in the field of tissue engineering and regenerative medicine. However, the majority of the developed systems consider only the release of a single growth factor, which is a limiting step for the success of the therapy. More recent studies have been focused on the design and tailoring of appropriate combinations of bioactive factors to match the desired goals regarding tissue regeneration. In fact, considering the complexity of extracellular matrix and the diversity of growth factors and cytokines involved in each biological response, it is expected that an appropriate combination of bioactive factors could lead to more successful outcomes in tissue regeneration. In this review, the evolution on the development of dual and multiple bioactive factor release systems for bone, cartilage, and osteochondral interface is overviewed, specifically the relevance of parameters such as dosage and spatiotemporal distribution of bioactive factors. A comprehensive collection of studies focused on the delivery of bioactive factors is also presented while highlighting the increasing impact of platelet-rich plasma as an autologous source of multiple growth factors.

Controlling the proliferation and differentiation stages to initiate periodontal regeneration

The success of periodontal regeneration depends on the coordination of early cell proliferation and late cell differentiation. The aim of this study was to investigate whether the proliferation or differentiation stage predominantly promotes the initiation of periodontal regeneration. Critical-sized periodontal defects were surgically created on rat maxillae and filled with poly-(D,L-lactide-co-glycolide)-poly-d,l-lactide hybrid microspheres encapsulating platelet-derived growth factor (PDGF, a promoter of mitogenesis), simvastatin (a promoter of osteogenic differentiation), or bovine serum albumin (a control). The encapsulation efficiency and in vitro release profiles of the microspheres were determined by high-performance liquid chromatography and enzyme-linked immunosorbent assay. The maxillae were harvested after 10 or 14 days and assessed by micro-computed tomography, histology, and immunohistochemistry for regeneration efficacy and cell viability. The rapid release of PDGF was observed within the first week, whereas a slow release profile was noted for simvastatin. The PDGF-treated specimens demonstrated a significantly higher bone volume fraction compared with bovine serum albumin- (p < 0.05) or simvastatin-treated (p < 0.05) specimens at day 14. Histologically, active bone formation originating from the defect borders was noted in both the PDGF- and the simvastatin-treated specimens, and functionally aligned periodontal ligament fiber insertion was only observed in the PDGF-treated specimens. The significant promotion of mitogenesis by PDGF treatment was also noted at day 14 (p < 0.05). In conclusion, increased mitogenesis or osteogenic differentiation may stimulate osteogenesis, and the upregulation of mitogenesis by PDGF appears to play a role in the initiation of periodontal regeneration.

Biocompatibility of chitosan-coated iron oxide nanoparticles with osteoblast cells

Background:

Bone disorders (including osteoporosis, loosening of a prosthesis, and bone infections) are of great concern to the medical community and are difficult to cure. Therapies are available to treat such diseases, but all have drawbacks and are not specifically targeted to the site of disease. Chitosan is widely used in the biomedical community, including for orthopedic applications. The aim of the present study was to coat chitosan onto iron oxide nanoparticles and to determine its effect on the proliferation and differentiation of osteoblasts.

Methods:

Nanoparticles were characterized using transmission electron microscopy, dynamic light scattering, x-ray diffraction, zeta potential, and vibrating sample magnetometry. Uptake of nanoparticles by osteoblasts was studied by transmission electron microscopy and Prussian blue staining. Viability and proliferation of osteoblasts were measured in the presence of uncoated iron oxide magnetic nanoparticles or those coated with chitosan. Lactate dehydrogenase, alkaline phosphatase, total protein synthesis, and extracellular calcium deposition was studied in the presence of the nanoparticles.

Results:

Chitosan-coated iron oxide nanoparticles enhanced osteoblast proliferation, decreased cell membrane damage, and promoted cell differentiation, as indicated by an increase in alkaline phosphatase and extracellular calcium deposition. Chitosan-coated iron oxide nanoparticles showed good compatibility with osteoblasts.

Conclusion:

Further research is necessary to optimize magnetic nanoparticles for the treatment of bone disease.

Stem cell-delivery therapeutics for periodontal tissue regeneration

Periodontitis, an inflammatory disease, is the most common cause of tooth loss in adults. Attempts to regenerate the complex system of tooth-supporting apparatus (i.e., the periodontal ligament, alveolar bone and root cementum) after loss/damage due to periodontitis have made some progress recently and provide a useful experimental model for the evaluation of future regenerative therapies. Concentrated efforts have now moved from the use of guided tissue/bone regeneration technology, a variety of growth factors and various bone grafts/substitutes toward the design and practice of endogenous regenerative technology by recruitment of host cells (cell homing) or stem cell-based therapeutics by transplantation of outside cells to enhance periodontal tissue regeneration and its biomechanical integration. This shift is driven by the general inability of conventional therapies to deliver satisfactory outcomes, particularly in cases where the disease has caused large tissue defects in the periodontium. Cell homing and cell transplantation are both scientifically meritorious approaches that show promise to completely and reliably reconstitute all tissue and connections damaged through periodontal disease, and hence research into both directions should continue. In view of periodontal regeneration by paradigms that unlock the body's innate regenerative potential has been reviewed elsewhere, this paper specifically explores and analyses the stem cell types and cell delivery strategies that have been or have the potential to be used as therapeutics in periodontal regenerative medicine, with particular emphasis placed on the efficacy and safety concerns of current stem cell-based periodontal therapies that may eventually enter into the clinic.

Designing biomaterials for in situ periodontal tissue regeneration

The regeneration of periodontal tissue poses a significant challenge to biomaterial scientists, tissue engineers and periodontal clinicians. Recent advances in this field have shifted the focus from the attempt to recreate tissue replacements/constructs ex vivo to the development of biofunctionalized biomaterials that incorporate and release regulatory signals in a precise and near-physiological fashion to achieve in situ regeneration. The molecular and physical information coded within the biomaterials define a local biochemical and mechanical niche with complex and dynamic regulation that establishes key interactions with host endogenous cells and, hence, may help to unlock latent regenerative pathways in the body by instructing cell homing and regulating cell proliferation/differentiation. In the future, these innovative principles and biomaterial devices promise to have a profound impact on periodontal reconstructive therapy and are also likely to reconcile the clinical and commercial pressures on other tissue engineering endeavors.

NMR imaging of chitosan and carboxymethyl starch tablets: swelling and hydration of the polyelectrolyte complex

The hydration and swelling properties of the tablets made of chitosan, carboxymethyl starch, and a polyelectrolyte complex of these two polysaccharides have been studied by NMR imaging. We studied the effect of pH and ionic strength on the swelling of the tablets and on the diffusion of fluid into the tablets in water and simulated physiological fluids. The pH value of the fluids exerts a more significant effect than their ionic strengths on the swelling of the tablets. The tablets are compared also with those made of cross-linked high amylose starch. The formation of complex helps to keep the integrity of the tablets in various media and render a slow and restricted swelling similar to that of the tablets of the cross-linked high amylase starch, which is significantly lower than the swelling of chitosan and of carboxymethyl starch. The capacities to modulate the release rate of drugs in different media are discussed by comparing the matrices and evaluating the preparation process of the complex. A sustained release of less soluble drugs such as aspirin in gastrointestinal fluids can be provided by the complex, due to the ionic interaction and hydrogen bonding between the drug and the biopolymer complex.

Engineering biomaterial systems to enhance viral vector gene delivery

Integrating viral gene delivery with engineered biomaterials is a promising strategy to overcome a number of challenges associated with virus-mediated gene delivery, including inefficient delivery to specific cell types, limited tropism, spread of vectors to distant sites, and immune responses. Viral vectors can be combined with biomaterials either through encapsulation within the material or immobilization onto a material surface. Subsequent biomaterial-based delivery can increase the vector's residence time within the target site, thereby potentially providing localized delivery, enhancing transduction, and extending the duration of gene expression. Alternatively, physical or chemical modification of viral vectors with biomaterials can be employed to modulate the tropism of viruses or reduce inflammatory and immune responses, both of which may benefit transduction. This review describes strategies to promote viral gene delivery technologies using biomaterials, potentially providing opportunities for numerous applications of gene therapy to inherited or acquired disorders, infectious disease, and regenerative medicine.

Biopolymer-based hydrogels as scaffolds for tissue engineering applications: a review

Hydrogels are physically or chemically cross-linked polymer networks that are able to absorb large amounts of water. They can be classified into different categories depending on various parameters including the preparation method, the charge, and the mechanical and structural characteristics. The present review aims to give an overview of hydrogels based on natural polymers and their various applications in the field of tissue engineering. In a first part, relevant parameters describing different hydrogel properties and the strategies applied to finetune these characteristics will be described. In a second part, an important class of biopolymers that possess thermosensitive properties (UCST or LCST behavior) will be discussed. Another part of the review will be devoted to the application of cryogels. Finally, the most relevant biopolymer-based hydrogel systems, the different methods of preparation, as well as an in depth overview of the applications in the field of tissue engineering will be given.

Toward delivery of multiple growth factors in tissue engineering

Inspired by physiological events that accompany the "wound healing cascade", the concept of developing a tissue either in vitro or in vivo has led to the integration of a wide variety of growth factors (GFs) in tissue engineering strategies in an effort to mimic the natural microenvironments of tissue formation and repair. Localised delivery of exogenous GFs is believed to be therapeutically effective for replication of cellular components involved in tissue development and the healing process, thus making them important factors for tissue regeneration. However, any treatment aiming to mimic the critical aspects of the natural biological process should not be limited to the provision of a single GF, but rather should release multiple therapeutic agents at an optimised ratio, each at a physiological dose, in a specific spatiotemporal pattern. Despite several obstacles, delivery of more than one GF at rates mimicking an in vivo situation has promising potential for the clinical management of severely diseased tissues. This article summarises the concept of and early approaches toward the delivery of dual or multiple GFs, as well as current efforts to develop sophisticated delivery platforms for this ambitious purpose, with an emphasis on the application of biomaterials-based deployment technologies that allow for controlled spatial presentation and release kinetics of key biological cues. Additionally, the use of platelet-rich plasma or gene therapy is addressed as alternative, easy, cost-effective and controllable strategies for the release of high concentrations of multiple endogenous GFs, followed by an update of the current progress and future directions of research utilising release technologies in tissue engineering and regenerative medicine.

In vitro cellular responses to scaffolds containing two microencapulated growth factors

Growth factors play an important role in the complex cascade of tissue events in periodontal regeneration, although optimal methods of delivery remain to be identified. We hypothesize that multiple delivery of growth factors, particularly via a microparticle-containing scaffold, will enhance cellular events leading to periodontal regeneration. In this study, cellular responses of periodontal ligament fibroblasts (PDLFs) in scaffolds containing microparticles (MPs) loaded with either bone morphogenetic protein (BMP)-2, insulin-like growth factor (IGF)-1, or a mixture of both MPs were evaluated, and the dual-MP-containing scaffold exhibited the release of different proteins in a sustained and independent fashion. When PDLF-seeded scaffolds were cultured in a flow perfusion bioreactor, cell metabolism and proliferation of PDLFs were significantly increased within 3 days in all IGF-1-containing scaffolds compared with those in groups lacking IGF-1 and particulate delivery enhanced these effects between 3 and 7 days. The dual-MP-containing group showed the most positive results. Both the BMP-2-in-MP and IGF-1-in-MP groups showed greater effects of alkaline phosphatase activity, more osteocalcin and osteopontin production, and more calcium deposition compared with matched GF-adsorbed groups. All osteoblastic markers were at their highest in the dual-MP-containing group at all detected time points. The combined results suggest that our dual-MP-containing scaffold can be used as a cell vehicle to positively affect cell behavior, thus exhibiting the potential to be a candidate scaffold for future periodontal tissue engineering.