Prolonged analgesia from Bupisome and Bupigel formulations: From design and fabrication to improved stability

Local anesthetic delivery systems for the management of postoperative pain

Postoperative pain (POP) is a major clinical challenge. Local anesthetics (LAs), including amide-type LAs, ester-type LAs, and other potential ion-channel blockers, are emerging as drugs for POP management because of their effectiveness and affordability. However, LAs typically exhibit short durations of action and prolonging the duration by increasing their dosage or concentration may increase the risk of motor block or systemic local anesthetic toxicity. In addition, techniques using LAs, such as intrathecal infusion, require professional operation and are prone to catheter displacement, dislodgement, infection, and nerve damage. With the development of materials science and nanotechnology, various LAs delivery systems have been developed to compensate for these disadvantages. Numerous delivery systems have been designed to continuously release a safe dose in a single administration to ensure minimal systemic toxicity and prolong pain relief. LAs delivery systems can also be designed to control the duration and intensity of analgesia according to changes in the external trigger conditions, achieve on-demand analgesia, and significantly improve pain relief and patient satisfaction. In this review, we summarize POP pathways, animal models and methods for POP testing, and highlight LAs delivery systems for POP management. STATEMENT OF SIGNIFICANCE: Postoperative pain (POP) is a major clinical challenge. Local anesthetics (LAs) are emerging as drugs for POP management because of their effectiveness and affordability. However, they exhibit short durations and toxicity. Various LAs delivery systems have been developed to compensate for these disadvantages. They have been designed to continuously release a safe dose in a single administration to ensure minimal toxicity and prolong pain relief. LAs delivery systems can also be designed to control the duration and intensity of analgesia to achieve on-demand analgesia, and significantly improve pain relief and patient satisfaction. In this paper, we summarize POP pathways, animal models, and methods for POP testing and highlight LAs delivery systems for POP management.

Development of alginate beads for precise environmental release applications: A design of experiment based approach and analysis

Controlled release of active ingredients are important for drug delivery and more recently environmental applications including modulated dosing of chemical and biological controls. This study demonstrates the importance of investigating various material science factors that can influence the diffusion rates of alginate beads to improve and tune their performance for marine environmental applications. This investigation aimed to design a rational workflow to aid in leveraging alginate bead use as a carrier matrix for releasing a specific active agent into water. Experiments were conducted to focus on the narrow a large list of relevant material formulation parameters, which included chitosan molecular weight, chitosan concentration, calcium concentration, drop height, and bead size. Once the most relevant material preparation methods were screened, a more robust statistic Design of Experiments approach was performed and results determined the important (and unimportant) factors for increasing dye release kinetics in marine water. The process was further streamlined by narrowing the critical experimental factors to a three-level based on the prior analysis: chitosan MW, chitosan concentration, and bead size. Analysis of the collected data indicated that while chitosan MW had a negligible impact (Fstatistic = 0.22), bead size (Fstatistic = 60.33) significantly influenced the diffusion rates based on surface area. However, chitosan MW had minor effects where lower chitosan MW enabled higher product release rates. This case investigation was a novel application of the design of experiment approach towards environmental applications to understand differences in release rates to marine waters for the first time and the workflow provided also serve as the basis for researchers to optimize other environmental applications requiring optimization when it is unknown how a large number of formulation variables will impact performance in different environmental scenarios.

Application of Advanced Technologies-Nanotechnology, Genomics Technology, and 3D Printing Technology-In Precision Anesthesia: A Comprehensive Narrative Review

There has been increasing interest and rapid developments in precision medicine, which is a new medical concept and model based on individualized medicine with the joint application of genomics, bioinformatics engineering, and big data science. By applying numerous emerging medical frontier technologies, precision medicine could allow individualized and precise treatment for specific diseases and patients. This article reviews the application and progress of advanced technologies in the anesthesiology field, in which nanotechnology and genomics can provide more personalized anesthesia protocols, while 3D printing can yield more patient-friendly anesthesia supplies and technical training materials to improve the accuracy and efficiency of decision-making in anesthesiology. The objective of this manuscript is to analyze the recent scientific evidence on the application of nanotechnology in anesthesiology. It specifically focuses on nanomedicine, precision medicine, and clinical anesthesia. In addition, it also includes genomics and 3D printing. By studying the current research and advancements in these advanced technologies, this review aims to provide a deeper understanding of the potential impact of these advanced technologies on improving anesthesia techniques, personalized pain management, and advancing precision medicine in the field of anesthesia.

DoE development of ionic gradient liposomes: A successful approach to improve encapsulation, prolong anesthesia and decrease the toxicity of etidocaine

Etidocaine (EDC) is a long-acting local anesthetic of the aminoamide family whose use was discontinued in 2008 for alleged toxicity issues. Ionic gradient liposomes (IGL) are nanostructured carriers for which an inner/outer gradient of ions increases drug upload. This work describes IGL_EDC, a formulation optimized by Design of Experiments, composed of hydrogenated soy phosphatidylcholine:cholesterol:EDC, and characterized by DLS, NTA, TEM/Cryo-TEM, DSC and ¹H NMR. The optimized IGL showed significant encapsulation efficiency (41 %), good shelf stability (180 days) and evidence of EDC interaction with the lipid bilayer (as seen by DSC and ¹H NMR results) that confirms its membrane permeation. In vitro (release kinetics and cytotoxicity) tests showed that the encapsulation of EDC into the IGL promoted sustained release for 24 h and decreased by 50 % the intrinsic toxicity of EDC to Schwann cells. In vivo IGL_EDC decreased the toxicity of EDC to Caenorhabditis elegans by 25 % and extended its anesthetic effect by one hour, after infiltrative administration, at clinically used (0.5 %) concentration, in rats. Thus, this novel drug delivery system is a promise for the possible reintroduction of EDC in clinics, aiming at the control of operative and postoperative pain.

Development and in vivo validation of phospholipid-based depots for the sustained release of bupivacaine

By direct deposition of the drug at the local site of action, injectable depot formulations - intended for treatment of a local disease or for local intervention - are designed to limit the immediate exposure of the active principle at a systemic level and to reduce the frequency of administration. To overcome known drawbacks in the production of some marketed phospholipid-based depots, here we propose to manufacture drug-loaded negatively charged liposomes through conventional technologies and to control their aggregation mixing a solution of divalent cations prior to administration. We identified phosphatidylglycerol (PG) as the most suitable phospholipid for controlled aggregation of the liposomes and to modulate the release of the anesthetic bupivacaine (BUP) from liposomal depots. In vivo imaging of the fluorescently-labelled liposomes showed a significantly higher retention of the PG liposomes at the injection site with respect to zwitterionic ones. In situ mixing of PG liposomes with calcium salts significantly extended the area under the curve of BUP in plasma compared to the non-depot system. Overall, controlling the aggregation of negatively charged liposomes with divalent cations not only modulated the particle clearance from the injection site but also the release in vivo of a small amphipathic drug such as BUP.

Evaluating the influence of particle morphology and density on the viscosity and injectability of a novel long-acting local anesthetic suspension

Proper pain management is well understood to be one of the fundamental aspects of a healthy postoperative recovery in conjunction with mobility and nutrition. Approximately, 10% of patients prescribed opioids after surgery continue to use opioids in the long-term and as little as 10 days on opioids can result in addiction. In an effort to provide physicians with an alternative pain management technique, this work evaluates the material properties of a novel local anesthetic delivery system designed for controlled release of bupivacaine for 72 hours. The formulation utilizes solid-lipid microparticles that encapsulate the hydrophobic molecule bupivacaine in its free-base form. The lipid microparticles are suspended in a non-crosslinked hyaluronic acid hydrogel, which acts as the microparticle carrier. Two different particle manufacturing techniques, milling and hot homogenization, were evaluated in this work. The hot homogenized particles had a slower and more controlled release than the milled particles. Rheological techniques revealed that the suspension remains a viscoelastic fluid when loaded with either particle type up to 25% (w/v) particles densities. Furthermore, the shear thinning properties of the suspension media, hyaluronic acid hydrogel, were conserved when bupivacaine-loaded solid-lipid microparticles were loaded up to densities of 25% (w/v) particle loading. The force during injection was measured for suspension formulations with varying hyaluronic acid hydrogel concentrations, particle densities, particle types and particle sizes. The results indicate that the formulation viscosity is highly dependent on particle density, but hyaluronic acid hydrogel is required for lowering injection forces as well as minimizing clogging events.

Analysis of cellular water content in T cells reveals a switch from slow metabolic water gain to rapid water influx prior to cell division

Cell growth is driven by the acquisition and synthesis of both dry biomass and water mass. In this study, we examine the increase of water mass in T cell during cell growth. We found that T-cell growth is characterized by an initial phase of slow increase in cellular water, followed by a second phase of rapid increase in water content. To study the origin of the water gain, we developed a novel methodology we call cold aqua trap-isotope ratio mass spectrometry, which allows analysis of the isotope composition of intracellular water. Applying cold aqua trap-isotope ratio mass spectrometry, we discovered that glycolysis-coupled metabolism of water accounts on average for 11 fl out of the 20 fl of water gained per cell during the initial slow phase. In addition, we show that at the end of the rapid phase before initiation of cell division, a water influx occurs, increasing the cellular water mass by threefold. Thus, we conclude that activated T cells switch from metabolizing water to rapidly taking up water from the extracellular medium prior to cell division. Our work provides a method to analyze cell water content as well as insights into the ways cells regulate their water mass.

Liposome-polymer complex for drug delivery system and vaccine stabilization

Liposomes have been used extensively as micro- and nanocarriers for hydrophobic or hydrophilic molecules. However, conventional liposomes are biodegradable and quickly eliminated, making it difficult to be used for delivery in specific routes, such as the oral and systemic routes. One way to overcome this problem is through complexation with polymers, which is referred to as a liposome complex. The use of polymers can increase the stability of liposome with regard to pH, chemicals, enzymes, and the immune system. In some cases, specific polymers can condition the properties of liposomes to be explicitly used in drug delivery, such as targeted delivery and controlled release. These properties are influenced by the type of polymer, crosslinker, interaction, and bond in the complexation process. Therefore, it is crucial to study and review these parameters for the development of more optimal forms and properties of the liposome complex. This article discusses the use of natural and synthetic polymers, ways of interaction between polymers and liposomes (on the surface, incorporation in lamellar chains, and within liposomes), types of bonds, evaluation standards, and their effects on the stability and pharmacokinetic profile of the liposome complex, drugs, and vaccines. This article concludes that both natural and synthetic polymers can be used in modifying the structure and physicochemical properties of liposomes to specify their use in targeted delivery, controlled release, and stabilizing drugs and vaccines.

Recent Developments in the Study of the Microenvironment of Cancer and Drug Delivery

Cancer is characterized by disrupted molecular variables caused by cells that deviate from regular signal transduction. The uncontrolled segment of such cancerous cells annihilates most of the tissues that contact them. Gene therapy, immunotherapy, and nanotechnology advancements have resulted in novel strategies for anticancer drug delivery. Furthermore, diverse dispersion of nanoparticles in normal stroma cells adversely affects the healthy cells and disrupts the crosstalk of tumour stroma. It can contribute to cancer cell progression inhibition and, conversely, to acquired resistance, enabling cancer cell metastasis and proliferation. The tumour's microenvironment is critical in controlling the dispersion and physiological activities of nano-chemotherapeutics which is one of the targeted drug therapy. As it is one of the methods of treating cancer that involves the use of medications or other substances to specifically target and kill off certain subsets of malignant cells. A targeted therapy may be administered alone or in addition to more conventional methods of care like surgery, chemotherapy, or radiation treatment. The tumour microenvironment, stromatogenesis, barriers and advancement in the drug delivery system across tumour tissue are summarised in this review.

Challenges and opportunities in the development of complex generic long-acting injectable drug products

Long-acting injectable (LAI) drug products enable the controlled release of a drug over an extended duration of time to improve the therapeutic effect, safety profile, or administration of an injectable product. The development of generic [505(j)] and differentiated [505(b)(2)] LAI products helps to provide patients and healthcare providers with more treatment options and to reduce overall healthcare costs, including those associated with drug product administration and patient compliance. In this review, we analyze the landscape of LAI products and identify the most common technical challenges that potential generic product entrants face. We focus on five formulation technologies that account for ~90% of approved LAI products, including those eligible for generic product registration over the next five years, to illustrate technology-specific challenges. We then review efforts from the U.S. Food and Drug Administration (FDA) to promote more generic product competition and emphasize the importance of collaboration among government, industry, and academia to advance the knowledge and capabilities of the scientific community. Regulatory bodies, industry, and academia are encouraged to anticipate challenges with emerging innovative LAI technologies and to leverage the experiences built on established technologies to foster generic product development.

Recent advances in drug delivery systems for enhancing drug penetration into tumors

The emergence of nanomaterials for drug delivery provides the opportunity to avoid the side effects of systemic drug administration and injury caused by the removal of tumors, delivering great promise for future cancer treatments. However, the efficacy of current nano drugs is not significantly better than that of the original drug treatments. The important reason is that nano drugs enter the tumor vasculature, remaining close to the blood vessels and unable to enter the tumor tissue or tumor cells to complete the drug delivery process. The low efficiency of drug penetration into tumors has become a bottleneck restricting the development of nano-drugs. Herein, we present a systematic overview of recent advances on the design of nano-drug carriers in drug delivery systems for enhancing drug penetration into tumors. The review is organized into four sections: The drug penetration process in tumor tissue includes paracellular and transcellular transport, which is summarized first. Strategies that promote tumor penetration are then introduced, including methods of remodeling the tumor microenvironment, charge inversion, dimensional change, and surface modification of ligands which promote tissue penetration. Conclusion and the prospects for the future development of drug penetration are finally briefly illustrated. The review is intended to provide thoughts for effective treatment of cancer by summarizing strategies for promoting the endocytosis of nano drugs into tumor cells.

Dexmedetomidine and levobupivacaine co-loaded, transcriptional transactivator peptide modified nanostructured lipid carriers or lipid-polymer hybrid nanoparticles, which performed better for local anesthetic therapy?

Local anesthetics (LAs) have been widely applied in clinic for regional anesthesia, postoperative analgesia, and management of acute and chronic pain. Nanostructured lipid carriers (NLCs) and lipid–polymer hybrid nanoparticles (LPNs) are reported as good choices for LA therapy. Transactivated transcriptional activator (TAT) was reported as a modifier for the topical delivery of drugs. In the present study, TAT modified, levobupivacaine (LEV) and dexmedetomidine (DEX) co-delivered NLCs (TAT-LEV&DEX-NLCs, T-L&D-N) and LPNs (TAT-LEV&DEX-LPNs, T-L&D-L) were designed and compared for the LA therapy. T-L&D-L exhibited better efficiency in improving the skin permeation, analgesic time, and pain control intensity than T-L&D-N both in vitro and in vivo. On the other side, T-L&D-N also improved the therapeutic effect of drugs to a large extent. These two systems both exhibited superiority in some respects. TAT modified LPNs are more promising platform for the long-term local anesthesia.

Topical anesthetic and pain relief using penetration enhancer and transcriptional transactivator peptide multi-decorated nanostructured lipid carriers

Many strategies have been developed to overcome the stratum corneum (SC) barrier, including functionalized nanostructures. Chemical penetration enhancers (CPEs) and cell-penetrating peptides (CPP) were applied to decorate nanostructured lipid carriers (NLC) for topical anesthetic and pain relief. A novel pyrenebutyrate (PB-PEG-DSPE) compound was synthesized by the amide action of the carboxylic acid group of PB with the amido groups of DSPE-PEG. PB-PEG-DSPE has a hydrophobic group, hydrophilic group, and lipid group. The lipid group can be inserted into NLC to form PB functional NLC. In order to improve the penetrability, TAT and PB multi-decorated NLC were designed for the delivery of lidocaine hydrochloride (LID) (TAT/PB LID NLC). The therapeutic effects of NLC in terms of in vitro skin penetration and in vivo in animal models were further studied. The size of TAT/PB LID NLC tested by DLS was 153.6 ± 4.3 nm. However, the size of undecorated LID NLC was 115.3 ± 3.6 nm. The PDI values of NLC vary from 0.13 ± 0.01 to 0.16 ± 0.03. Zeta potentials of NLC were negative, between -20.7 and -29.3 mV. TAT/PB LID NLC (851.2 ± 25.3 µg/cm²) showed remarkably better percutaneous penetration ability than PB LID NLC (610.7 ± 22.1 µg/cm²), TAT LID NLC (551.9 ± 21.8 µg/cm²) (p < .05) and non-modified LID NLC (428.2 ± 21.4 µg/cm²). TAT/PB LID NLC exhibited the most prominent anesthetic effect than single ligand decorated or undecorated LID NLC in vivo. The resulting TAT/PB LID NLC exhibited good skin penetration and anesthetic efficiency, which could be applied as a promising anesthesia system.

Liposomal Bupivacaine (Bupigel) Demonstrates Minimal Local Nerve Toxicity in a Rabbit Functional Model

We previously reported the development of a novel formulation of an ultra-long-acting local anesthetic based on bupivacaine encapsulated in large multivesicular liposomes (Bupisomes) embedded in hydrogel. This formulation (Bupigel) prolonged bupivacaine release from the formulation in dissolution-like studies in vitro and analgesia in vivo in mouse, rat, and pig models. In this study we assessed Bupigel neurotoxicity on rabbit sciatic nerve using histopathology and electrophysiologic testing. Sciatic nerves of both hind limbs were injected dropwise with different formulations. Nerve conduction studies and needle electromyography two weeks after perineural administration showed signs of neural damage after injection of free lidocaine and bupivacaine, while there was no sign of neural damage after injection with saline, demonstrating the validity of the method. This test also did not show evidence of motor or sensory nerve damage after injection with liposomal bupivacaine at a dose 10-times higher than free bupivacaine. Histologically, signs of neural damage could be observed with lidocaine. Nerves injected with Bupigel showed mild signs of inflammation and small residues of hydrogel in granulomas, indicating a long residence time of the hydrogel at the site of injection, but no histopathological signs of nerve damage. This demonstrated that early signs of neural damage were detected electrophysiologically, showing the usefulness and sensitivity of electrodiagnostic testing in detection of neural damage from new formulations.

Entrapping bupivacaine-loaded emulsions in a crosslinked-hydrogel increases anesthetic effect and duration in a rat sciatic nerve block model

The purpose of this research was to evaluate a novel long-acting bupivacaine delivery system for control of postoperative pain. Bupivacaine-loaded lipid emulsion (BLE) droplets were created by high-speed homogenization. The BLE droplets were then entrapped into a crosslinked-hyaluronic acid hydrogel system to create an injectable composite gel formulation (HA-BLE). Dynamic light scattering, rheological, and drug release techniques were used to characterize the formulations. A rat sciatic nerve block with a thermal nociceptive assay was used to evaluate the anesthetic effect in comparison to controls, bupivacaine HCl and liposomal bupivacaine. The BLE droplets had a zeta potential, droplet size, and polydispersity index of -40.8 ± 0.66 mV, 299 ± 1.77 nm, and 0.409 ± 0.037, respectively. The HA-BLE formulation could be injected through 25 g needles and had an elastic modulus of 372 ± 23.7 Pa. Approximately 80% and 100% of bupivacaine was released from the BLE and HA-BLE formulations by 20 and 68 h, respectively. The HA-BLE formulation had a 5-times greater anesthetic area under the curve and an anesthetic duration that was twice as long as controls. Results indicate that incorporating the BLEs into the hydrogel significantly increased anesthetic effect by protecting the BLE droplets from the in vivo environment.

Topical anesthetic analgesic therapy using the combination of ropivacaine and dexmedetomidine: hyaluronic acid modified long-acting nanostructured lipid carriers containing a skin penetration enhancer

Purpose

Hyaluronic acid-poly(ethylene glycol)-distearoyl phosphoethanolamine (HA-PEG-DSPE) modified and tocopheryl polyethylene glycol 1000 succinate (TPGS) contained nanostructured lipid carriers (NLCs) were prepared loading ropivacaine and dexmedetomidine to improve the topical anesthetic analgesic anesthesia efficiency.

Methods

NLCs were prepared by the solvent diffusion method. The average particle size, zeta potential, release behavior, and cytotoxicity of the NLCs were tested. Ex vivo skin permeation was studied using a Franz diffusion cell mounted with depilated rat skin. Local anesthesia antinociceptive efficiency was evaluated by rat tail flick latency study in vivo.

Results

NLCs have sizes of about 100 nm, with negative zeta potentials. All the NLCs formulations were found to be significantly less cytotoxic than free drugs at equivalent concentrations. The cumulative amount of drugs penetrated through rat skin from NLCs was 2.0–4.7 folds higher than that of the drugs solution. The in vivo anesthesia antinociception study displayed that NLCs showed stronger and longer anesthesia antinociceptive effect when compared with single drugs loaded NLCs and drugs solution even at a lower dosage of drugs.

Conclusion

The results demonstrated that the HA modified, TPGS contained, dual drugs loaded NLCs could perform a synergistic effect and may reduce the amount of drugs, which can lower the toxicity of the system and at the meanwhile, increase the anesthesia antinociceptive efficiency.

Recent advances in polymer-based drug delivery systems for local anesthetics

Local anesthetics, which cause temporary loss of pain by inhibiting the transmission of nerve impulses, have been widely used in clinical practice. However, neurotoxicity and short half-lives have significantly limited their clinical applications. To overcome those barriers, numerous drug delivery systems (DDS) have been designed to encapsulate local anesthetic agents, so that large doses can be released slowly and provide analgesia over a prolonged period. So far, multiple classes of local anesthetic carriers have been investigated, with some of them already on the market. Among those, polymer-based delivery platforms are the most extensively explored, especially in the form of polymeric nanoparticle carriers. This review gives a specific focus on the most commonly used natural and synthetic polymers for local anesthetics delivery, owing to their excellent biocompatibility, biodegradability and versatility. State-of-the-art studies concerning such polymer delivery systems have been discussed in depth. We also highlight the impact of those delivery platforms as well as some key challenges that need to be overcome for their broader clinical applications. STATEMENT OF SIGNIFICANCE: Currently, local anesthetics have been widely used in clinically practices to prevent transmission of nerve impulses. However, the applications of anesthetics are greatly limited due to their neurotoxicity and short half-lives. Moreover, it is difficult to maintain frequent administrations which can cause poor compliance and serious consequences. Numerous drug delivery systems have been developed to solve those issues. In this review, we highlight the recent advances in polymer-based drug delivery systems for local anesthetics. The advantages as well as shortcomings for different types of polymer-based drug delivery systems are summarized in this paper. In the end, we also give prospects for future development of polymer drug delivery systems for anesthetics.

Lipid-based carriers for the delivery of local anesthetics

INTRODUCTION

There is a clinical need for pharmaceutical dosage forms devised to prolong the acting time of local anesthetic (LA) agents or to reduce their toxicity. Encapsulation of LA in drug delivery systems (DDSs) can provide long-term anesthesia for inpatients (e.g. in immediate postsurgical pain control, avoiding the side effects from systemic analgesia) and diminished systemic toxicity for outpatients (in ambulatory/dentistry procedures). The lipid-based formulations described here, such as liposomes, microemulsions, and lipid nanoparticles, have provided several nanotechnological advances and therapeutic alternatives despite some inherent limitations associated with the fabrication processes, costs, and preclinical evaluation models.

AREAS COVERED

A description of the currently promising lipid-based carriers, including liposomes, microemulsions, and nanostructured lipid carriers, followed by a systematic review of the existing lipid-based formulations proposed for LA. Trends in the research of these LA-in-DDS are then exposed, from the point of view of administration route and alternatives for non-traditionally administered LA molecules.

EXPERT OPINION

Considering the current state and potential future developments in the field, we discuss the reasons for why dozens of formulations published every year fail to reach clinical trials; only one lipid-based formulation for the delivery of local anesthetic (Exparel®) has been approved so far.

An efficient and long-acting local anesthetic: ropivacaine-loaded lipid-polymer hybrid nanoparticles for the control of pain

Purpose

Local anesthetics are used clinically for the control of pain following operation (including gastrointestinal surgery) or for the management of other acute and chronic pain. This study aimed to develop a kind of lipid-polymer hybrid nanoparticles (LPNs), which were constructed using poly(ethylene glycol)-distearoylphosphatidylethanolamine (PEG-DSPE) as the hydrophilic lipid shell and poly-ε-caprolactone (PCL) as the hydrophobic polymeric core.

Methods

Ropivacaine (RPV) was entrapped in the LPNs (RPV-LPNs) and the physicochemical and biochemical properties such as size, zeta potential, drug release, and cytotoxicity were studied. The long-lasting effects and safety aspects of the LPNs were evaluated in vitro and in vivo.

Results

The particle size and zeta potential of RPV-LPNs were 112.3±2.6 nm and −33.2±3.2 mV, with an entrapment efficiency (EE) of 90.2%±3.7%. Ex vivo permeation efficiency of LPNs was better than the drug solution. The RPV-LPNs exhibited a long-lasting in vivo anesthesia effect in both rats and mice.

Conclusion

Considering the low cytotoxicity, the LPNs prepared here could be used as an efficient local anesthetic for the control of pain.

Drug-Loaded Biocompatible Nanocarriers Embedded in Poloxamer 407 Hydrogels as Therapeutic Formulations

Hydrogels are three-dimensional networks of hydrophilic polymers able to absorb and retain a considerable amount of water or biological fluid while maintaining their structure. Among these, thermo-sensitive hydrogels, characterized by a temperature-dependent sol–gel transition, have been massively used as drug delivery systems for the controlled release of various bioactives. Poloxamer 407 (P407) is an ABA-type triblock copolymer with a center block of hydrophobic polypropylene oxide (PPO) between two hydrophilic polyethyleneoxide (PEO) lateral chains. Due to its unique thermo-reversible gelation properties, P407 has been widely investigated as a temperature-responsive material. The gelation phenomenon of P407 aqueous solutions is reversible and characterized by a sol–gel transition temperature. The nanoencapsulation of drugs within biocompatible delivery systems dispersed in P407 hydrogels is a strategy used to increase the local residence time of various bioactives at the injection site. In this mini-review, the state of the art of the most important mixed systems made up of colloidal carriers localized within a P407 hydrogel will be provided in order to illustrate the possibility of obtaining a controlled release of the entrapped drugs and an increase in their therapeutic efficacy as a function of the biomaterial used.

Bioengineered liposome-scaffold composites as therapeutic delivery systems

The therapeutic potential of liposomes can be amplified when combined with biomaterial scaffolds. Such configurations overcome the convergent demands of therapies by enabling enhanced delivery, environmental responsiveness and potency. Liposomes benefit from the increased physical and mechanical strength, favorable rheological properties and natural environment conducive to improved tissue formation that scaffolds provide, while enabling biocompatible delivery of hydrophilic and lipophilic compounds that can be further functionalized to achieve targeted delivery. Topical, ocular, oral, nasal and vaginal applications have been explored using various polymer- or nanofiber-based scaffolds. Mechanistic and rheological findings on complexation between biomaterials, liposomes and cargo have led to multimodal systems with tremendous clinical potential. A review of the key developments in bioengineered liposome-scaffold composites is presented in this manuscript.

Development of bupivacaine decorated reduced graphene oxide and its local anesthetic effect-In vivo study

The present works aims to develop bupivacaine modified reduced graphene oxide (BPV/RGO), and comparative evaluation of their anesthetic effect with free bupivacaine (BPV). The prepared BPV/RGO was studied by using various spectroscopic and microscopic characterization studies. In vitro drug release from BPV/RGO was studied using HPLC analysis. The cytotoxicity of BPV/RGO was studied against fibroblast (3T3) cells. In vivo evaluation of anesthetic effects was performed on animal models. BPV/RGO showed a prolonged in vitro release and lower cytotoxicity when compared to free BPV. Also, BPV/RGO showed a significantly prolonged analgesic effect when compared to free BPV. Further, the prepared BPV/RGO drug delivery system demonstrated to function as gifted to overcome the drawbacks of free BPV and other available drug delivery systems by prolonging the anesthetic effect with poor cytotoxicity.

Encapsulation of ropivacaine in a combined (donor-acceptor, ionic-gradient) liposomal system promotes extended anesthesia time

Ropivacaine is a local anesthetic with similar potency but lower systemic toxicity than bupivacaine, the most commonly used spinal anesthetic. The present study concerns the development of a combined drug delivery system for ropivacaine, comprised of two types of liposomes: donor multivesicular vesicles containing 250 mM (NH₄)₂SO₄ plus the anesthetic, and acceptor large unilamellar vesicles with internal pH of 5.5. Both kinds of liposomes were composed of hydrogenated soy-phosphatidylcholine:cholesterol (2:1 mol%) and were prepared at pH 7.4. Dynamic light scattering, transmission electron microscopy and electron paramagnetic resonance techniques were used to characterize the average particle size, polydispersity, zeta potential, morphology and fluidity of the liposomes. In vitro dialysis experiments showed that the combined liposomal system provided significantly longer (72 h) release of ropivacaine, compared to conventional liposomes (~45 h), or plain ropivacaine (~4 h) (p <0.05). The pre-formulations tested were significantly less toxic to 3T3 cells, with toxicity increasing in the order: combined system < ropivacaine in donor or acceptor liposomes < ropivacaine in conventional liposomes < plain ropivacaine. The combined formulation, containing 2% ropivacaine, increased the anesthesia duration up to 9 h after subcutaneous infiltration in mice. In conclusion, a promising drug delivery system for ropivacaine was described, which can be loaded with large amounts of the anesthetic (2%), with reduced in vitro cytotoxicity and extended anesthesia time.

Local anesthetic effects of bupivacaine loaded lipid-polymer hybrid nanoparticles: In vitro and in vivo evaluation

PURPOSE

There is a compelling need for prolonged local anesthetic that would be used for analgesia with a single administration. However, due to the low molecular weight of local anesthetics (LA) (lidocaine, bupivacaine, procaine, dibucaine, etc), they present fast systemic absorption.

METHODS

The aim of the present study was to develop and evaluate bupivacaine lipid-polymer hybrid nanoparticles (BVC LPNs), and compared with BVC loaded PLGA nanoparticles (BVC NPs). Their morphology, particle size, zeta potential and drug loading capacity were evaluated. In vitro release study, stability and cytotoxicity were studied. In vivo evaluation of anesthetic effects was performed on animal models.

RESULTS

A facile nanoprecipitation and self-assembly method was optimized to obtain BVC LPNs, composed of PLGA, lecithin and DSPE-PEG₂₀₀₀, of ∼175nm particle size. Compared to BVC NPs, BVC LPNs exhibited prolonged in vitro release in phosphate-buffered saline (pH=7.4). Further, BVC LPNs displayed enhanced in vitro stability in 10% FBS and lower cytotoxicity (the concentration of BVC ranging from 1.0μM to 20μM). In addition, BVC LPNs exhibited significantly prolonged analgesic duration.

CONCLUSION

These results demonstrate that the LPNs could function as promising drug delivery system for overcoming the drawbacks of poor stability and rapid drug leakage, and prolonging the anesthetic effect with slight toxicity.

Drug delivery systems for prolonged duration local anesthesia

Numerous drug delivery systems have been applied to the problem of providing prolonged duration local anesthesia (PDLA). Here we review the rationale for PDLA, the desirable features for and important attributes of such systems, and specific examples that have been developed.

Advances in Hybrid Polymer-Based Materials for Sustained Drug Release

The use of biomaterials composed of organic pristine components has been successfully described in several purposes, such as tissue engineering and drug delivery. Drug delivery systems (DDS) have shown several advantages over traditional drug therapy, such as greater therapeutic efficacy, prolonged delivery profile, and reduced drug toxicity, as evidenced by in vitro and in vivo studies as well as clinical trials. Despite that, there is no perfect delivery carrier, and issues such as undesirable viscosity and physicochemical stability or inability to efficiently encapsulate hydrophilic/hydrophobic molecules still persist, limiting DDS applications. To overcome that, biohybrid systems, originating from the synergistic assembly of polymers and other organic materials such as proteins and lipids, have recently been described, yielding molecularly planned biohybrid systems that are able to optimize structures to easily interact with the targets. This work revised the biohybrid DDS clarifying their advantages, limitations, and future perspectives in an attempt to contribute to further research of innovative and safe biohybrid polymer-based system as biomaterials for the sustained release of active molecules.

A Novel Proliposomal Ropivacaine Oil: Pharmacokinetic-Pharmacodynamic Studies After Subcutaneous Administration in Pigs

BACKGROUND

Liposomal local anesthetics are limited by a short liposomal shelf-life, even when under refrigeration. We describe a novel proliposomal ropivacaine that produces liposomes in situ, only after exposure to aqueous media.

METHODS

In vitro: Nanoparticles were assessed (particle size distribution analyzer, cryo-transmission electron microscopy) at baseline and after exposure to saline/plasma.

TOXICITY

In porcine wound healing study (n = 12), healing was assessed by photography, clinical assessment, and histology. Pharmacodynamics: Seventeen young piglets were randomly assigned to plain 0.5% ropivacaine (n = 5), proliposomal 4% ropivacaine (n = 6), or sham (n = 6). Tactile threshold was assessed using von Frey filaments applied to the surgical wound; the nonoperated skin was used as a control. Tactile threshold over time was determined using area under the curve (AUC) and assessed by 1-way analysis of variance.

PHARMACOKINETICS

8 young piglets were randomly assigned to plain 0.5% (25 mg, n = 4) or proliposomal 4% (200 mg, n = 4) ropivacaine. Plasma ropivacaine was assessed by high-performance liquid chromatography at baseline and at intervals over 36 hours. Paired ropivacaine concentration (from wound exudate and plasma) was obtained at 96 hours. Data were analyzed using noncompartmental and compartmental models.

RESULTS

In vitro: On exposure to saline and plasma, the study drug was transformed from a homogenous oil to an emulsion containing liposomes of approximately 1.4-μm diameter; this effect was dilution dependent and stable over time.

TOXICITY

All wounds healed well; no effect of drug group was observed. Pharmacodynamics: Plain and proliposomal ropivacaine provided sensory anesthesia for approximately 6 and 30 hours, respectively. There was an approximately 7-fold increase in the AUC of anesthesia for proliposomal ropivacaine compared with plain ropivacaine (mean difference, 1010; 95% confidence interval [CI], 625-1396 g·h/mm; P < 0.0001).

PHARMACOKINETICS

There was no difference in Cmax (2.31 ± 0.74 vs 2.32 ± 0.46 mg/L), despite an approximately 8-fold difference in dose. However, proliposomal ropivacaine was associated with a marked prolongation of Tmax (6.50 ± 6.35 vs 0.5 ± 0.0 hours), terminal half-life (16.07 ± 5.38 vs 3.46 ± 0.88 hours; P = 0.0036), and ropivacaine-time AUC (47.72 ± 7.16 vs 6.36 ± 2.07 h·mg/L; P < 0.0001), when compared with plain ropivacaine. The proliposomal formulation provided an approximately 250-fold higher ropivacaine concentration in the surgical wound (mean difference, 3783 ng/mL; 95% CI, 1708-5858; P = 0.001) and an approximately 25-fold higher wound:plasma ropivacaine concentration ratio (mean difference, 126; 95% CI 38-213; P = 0.011).

CONCLUSIONS

Proliposomal ropivacaine exerted prolonged anesthesia with delayed elimination, typical for liposomal drugs. The advantage of this novel proliposomal ropivacaine is its ease of preparation and its extended shelf-stability (>2 years) at room temperature.

Proliposomal Ropivacaine Oil: Pharmacokinetic and Pharmacodynamic Data After Subcutaneous Administration in Volunteers

BACKGROUND

Slow-release liposomal formulations of local anesthetics prolong plasma redistribution and reduce peak plasma drug concentration, allowing safer administration of larger doses and further prolonging sensory effects. However, their clinical applicability is limited by expensive manufacture and liposomal leakage. Previously, we described the simple preparation of a novel proliposomal ropivacaine oil that produces multilamellar liposomal vesicles on exposure to aqueous media and that has a shelf-life of >2 years at room temperature. In this study, we present both pharmacodynamic and pharmacokinetic data in healthy volunteers after subcutaneous injection of this novel proliposomal preparation of ropivacaine.

METHODS

In the pharmacodynamic phase of this study, 15 volunteers received 3 separate subcutaneous injections of 2.5 mL containing 1 of the following drugs: proliposomal 4% ropivacaine, plain 0.5% ropivacaine, and the ropivacaine-free proliposomal vehicle. Drugs were administered into the lower back, and their location was randomized and blinded; a separate area was used as an uninjected, open control. Experimental sensory assessment was made at repeated intervals over 72 hours using both pinprick sensation and experimental heat pain tolerance (assessed using quantitative sensory testing). In a separate pharmacokinetic phase of this study, 9 volunteers received subcutaneous injections of 2.5 mL of either proliposomal 4% ropivacaine (n = 6) or plain 0.5% ropivacaine (n = 3); these participants had plasma ropivacaine concentrations assessed at repeated intervals over 72 hours.

RESULTS

The mean ± SE duration of pinprick anesthesia after proliposomal and plain ropivacaine administration lasted 28.8 ± 6.0 and 15.9 ± 3.5 hours, respectively (mean difference, 16.8 hours; 95% confidence interval, 10.0-23.7; P = 0.001). For experimental heat pain, the anesthesia duration was approximately 36 and 12 hours, respectively, with mean ± SE area under the curve of the normalized heat pain tolerance over time 55.0 ± 28.8 Δ°C·min for proliposomal ropivacaine and 9.6 ± 26.0 Δ°C·min for plain ropivacaine (mean difference, 64.6 Δ°C·min; 95% confidence interval, 10.2-119.0; P = 0.036). In the pharmacokinetic study, there was no significant difference in peak plasma concentration in the proliposomal ropivacaine group (164 ± 43 ng/mL compared with 100 ± 41 ng/mL in the plain ropivacaine group; P = 0.07) despite an 8-fold increase in ropivacaine dose in the proliposomal group. The 99% upper prediction limit for peak plasma concentrations (351 ng/mL proliposomal; 279 ng/mL plain) was well below the putative toxic plasma concentration for both groups. The mean ± SE terminal half-life and area under the curve for proliposomal ropivacaine versus plain ropivacaine were 13.8 ± 3.6 hours vs 5.9 ± 2.3 hours (P = 0.011) and 5090 ± 1476 h·ng/mL vs 593 ± 168 h·ng/mL (P = 0.0014), respectively.

CONCLUSIONS

The prolonged pharmacodynamic effect of proliposomal ropivacaine, together with its delayed elimination and prolonged redistribution to plasma, is compatible to depot-related slow-release and similar to the performance of other liposomal local anesthetics. The advantage of the proliposomal oil is its ease of preparation and its extended shelf-stability at room temperature.

Control Release Anesthetics to Enable an Integrated Anesthetic-mesenchymal Stromal Cell Therapeutic

While general anesthetics control pain via consciousness regulation, local anesthetics (LAs) act by decreasing sensation in the localized area of administration by blocking nerve transmission to pain centers. Perioperative intra-articular administration of LAs is a commonly employed practice in orthopedic procedures to minimize patient surgical and post-surgical pain and discomfort. LAs are also co-administered with cellular mesenchymal stromal cell (MSC) therapies for a variety of tissue regenerative and inflammatory applications including osteoarthritis (OA) treatment; however, LAs can affect MSC viability and function. Therefore, finding an improved method to co-administer LAs with cells has become critically important. We have developed a sustained release LA delivery model that could enable the co-administration of LAs and MSCs. Encapsulation of liposomes within an alginate matrix leads to sustained release of bupivacaine as compared to bupivacaine-containing liposomes alone. Furthermore, drug release is maintained for a minimum of 4 days and the alginate-liposome capsules mitigated the adverse effects of bupivacaine on MSC viability.

Local anesthetic lidocaine delivery system: chitosan and hyaluronic acid-modified layer-by-layer lipid nanoparticles

CONTEXT

Transdermal local anesthesia is one of the most applied strategies to avoid systemic adverse effects; there is an appealing need for a prolonged local anesthetic that would provide better bioavailability and longer pain relief with a single administration.

OBJECTIVE

Layer-by-layer (LBL) technique was used in this study to explore a nanosized drug delivery system for local anesthetic therapy.

MATERIALS AND METHODS

LBL-coated lidocaine-loaded nanostructured lipid nanoparticles (LBL-LA/NLCs) were prepared and characterized in terms of particle size (PS), zeta potential, drug encapsulation efficiency (EE), in vitro skin permeation and in vivo local anesthetic studies.

RESULTS

Evaluation of the in vitro skin permeation and in vivo anesthesia effect illustrated that LBL-LA/NLCs can enhance and prolong the anesthetic effect of LA.

DISCUSSION AND CONCLUSION

LBL-LA/NLCs could function as a promising drug delivery strategy for overcoming the barrier function of the skin and could deliver anesthetic through the skin with sustained release behavior for local anesthetic therapy.

From micro- to nanostructured implantable device for local anesthetic delivery

Local anesthetics block the transmission of painful stimuli to the brain by acting on ion channels of nociceptor fibers, and find application in the management of acute and chronic pain. Despite the key role they play in modern medicine, their cardio and neurotoxicity (together with their short half-life) stress the need for developing implantable devices for tailored local drug release, with the aim of counterbalancing their side effects and prolonging their pharmacological activity. This review discusses the evolution of the physical forms of local anesthetic delivery systems during the past decades. Depending on the use of different biocompatible materials (degradable polyesters, thermosensitive hydrogels, and liposomes and hydrogels from natural polymers) and manufacturing processes, these systems can be classified as films or micro- or nanostructured devices. We analyze and summarize the production techniques according to this classification, focusing on their relative advantages and disadvantages. The most relevant trend reported in this work highlights the effort of moving from microstructured to nanostructured systems, with the aim of reaching a scale comparable to the biological environment. Improved intracellular penetration compared to microstructured systems, indeed, provides specific drug absorption into the targeted tissue and can lead to an enhancement of its bioavailability and retention time. Nanostructured systems are realized by the modification of existing manufacturing processes (interfacial deposition and nanoprecipitation for degradable polyester particles and high- or low-temperature homogenization for liposomes) or development of novel strategies (electrospun matrices and nanogels). The high surface-to-volume ratio that characterizes nanostructured devices often leads to a burst drug release. This drawback needs to be addressed to fully exploit the advantage of the interaction between the target tissues and the drug: possible strategies could involve specific binding between the drug and the material chosen for the device, and a multiscale approach to reach a tailored, prolonged drug release.

Insights into composition/structure/function relationships of Doxil® gained from "high-sensitivity" differential scanning calorimetry

Thermotropic behavior of Doxil® and its generic, Lipodox®, was characterized using "high-sensitivity" differential scanning calorimetry (DSC). This is the first report that two distinct endotherms were observed in Doxil and Lipodox upon heating. The first (Tm at 51±2°C) is broad and of low enthalpy, representing the membrane lipid phase transition, which occurs despite having high (38mole%) cholesterol. The second (Tm at ∼70°C) is narrow, representing melting of the intraliposomal doxorubicin-sulfate nanocrystals. The thermograms of Doxil and Lipodox are practically identical. The membrane phase transition is similar to that of drug-free nanoliposomes of the same size and lipid composition as Doxil, suggesting lack of significant drug-membrane interaction. The melting endotherm of the intraliposomal nanocrystals is 2.0-2.5-fold narrower than that of the crystals formed in a solution of 250mM ammonium sulfate and >60mg/ml doxorubicin. This suggests that nanovolume of liposomes improves doxorubicin-sulfate crystallinity. Moreover, both phase transitions are reversible in cycled DSC scanning (15-90-15°C). This indicates an unexpected "non-leaky" phospholipid phase transition and excellent physical and chemical stabilities of Doxil after short exposure to high temperature. Reducing mole% of cholesterol results in a "leaky" membrane phase transition of higher enthalpy. Namely, high mole% cholesterol is essential for the resistance to drug leakage during phase transition. Pegylated liposomal doxorubicin in which HSPC was replaced by DPPC shows the same non-leaky phase transition but at a lower temperature, indicating this type of phase transition is not unique to Doxil. The presence of DSPE-PEG2k increases the cooperativity of the phase transition. High-sensitivity DSC helps illuminate composition/structure/function relationships of Doxil, and is useful for the equivalence/similarity studies.

Release Pattern of Liposomal Bupivacaine in Artificial Cerebrospinal Fluid

OBJECTIVE

We aimed to compare the possible controlled release profile of multilamellar liposomal bupivacaine formulations with non-liposomal forms in artificial cerebrospinal fluid (CSF) under in vitro conditions.

METHODS

Liposome formulations were prepared using a dry-film hydration method. Then, an artificial CSF-buffered solution was prepared. Bupivacaine base with liposomal bupivacaine base, bupivacaine HCl with liposomal bupivacaine HCl and bupivacaine HCl were added in a Franz diffusion cell. These solutions were kept in a hot water bath for 24 h. The samples were taken at 0.5, 1, 3, 6, 12 and 24 h (1st series of experiment). Solutions of bupivacaine base with liposomal bupivacaine base and bupivacaine HCl with liposomal bupivacaine HCl were centrifuged to obtain liposomal bupivacaine base and liposomal bupivacaine HCl. Afterwards, liposomal bupivacaine base and liposomal bupivacaine HCl were added in a Franz diffusion cell. After keeping these solutions in a hot water bath for 24 h as well, the samples were taken at the same time intervals (2(nd) series of experiment). All samples (54 from the 1st experiment and 36 from the 2(nd) experiment) were analysed with high-performance liquid chromatography and ultra-performance liquid chromatography and their chromatograms were obtained.

RESULTS

After obtaining calibration curves for bupivacaine base and HCl, release patterns of these formulations were plotted. A markedly controlled slow-release pattern was observed for multilamellar liposomal bupivacaine than for non-liposomal bupivacaine in artificial CSF.

CONCLUSION

Demonstration of controlled slow-release profile for mutilamellar liposomal bupivacaine in artificial CSF in vitro might support intrathecal use of liposomal bupivacaine in vivo in animal studies.

Phototriggered Local Anesthesia

We report a phototriggerable formulation enabling in vivo repeated and on-demand anesthesia with minimal toxicity. Gold nanorods (GNRs) that can convert near-infrared (NIR) light into heat were attached to liposomes (Lip-GNRs), enabling light-triggered phase transition of their lipid bilayers with a consequent release of payload. Lip-GNRs containing the site 1 sodium channel blocker tetrodotoxin and the α2-adrenergic agonist dexmedetomidine (Lip-GNR-TD) were injected subcutaneously in the rat footpad. Irradiation with an 808 nm continuous wave NIR laser produced on-demand and repeated infiltration anesthesia in the rat footpad in proportion to the irradiance, with minimal toxicity. The ability to achieve on-demand and repeated local anesthesia could be very beneficial in the management of pain.

Chemical and physical characterization of remotely loaded bupivacaine liposomes: comparison between large multivesicular vesicles and small unilamellar vesicles

Large multivesicular liposomes (LMVV) remotely loaded with bupivacaine (Bupisome) were previously demonstrated to be a stable, long-acting local anesthetic. We demonstrate that this is not the case for small unilamellar vesicles (SUV) of the same lipid composition also remotely loaded with bupivacaine. We show that the trapped volume in LMVV is 21-fold higher and the drug-to-lipid mole ratio is 10-fold higher than in SUV. Cryo-transmission electron micrographs and differential interference contrast microscopy show that there are no bupivacaine crystals inside LMVV and SUV. The thermotropic characterization studied by DSC demonstrates that the drug interacts with the liposome membrane, which, together with the above results on the drug-to-lipid ratio, explains the small in vitro drug release from the SUV and large (but <100%) release from the LMVV after 24 h at 37 °C. The absence of analgesia in mice treated locally with SUV loaded with bupivacaine compared with prolonged analgesia from LMVV correlates well with the in vitro results. The study indicates that in LMVV and SUV, part of the bupivacaine is associated with the liposomal membrane, which is poorly available for analgesia. The membrane fraction is very high in SUV and much smaller in LMVV. The much larger trapped volume of the LMVV explains the higher drug availability and better analgesia of LMVV.

Doxil®--the first FDA-approved nano-drug: lessons learned

Doxil®, the first FDA-approved nano-drug (1995), is based on three unrelated principles: (i) prolonged drug circulation time and avoidance of the RES due to the use of PEGylated nano-liposomes; (ii) high and stable remote loading of doxorubicin driven by a transmembrane ammonium sulfate gradient, which also allows for drug release at the tumor; and (iii) having the liposome lipid bilayer in a "liquid ordered" phase composed of the high-T(m) (53 °C) phosphatidylcholine, and cholesterol. Due to the EPR effect, Doxil is "passively targeted" to tumors and its doxorubicin is released and becomes available to tumor cells by as yet unknown means. This review summarizes historical and scientific perspectives of Doxil development and lessons learned from its development and 20 years of its use. It demonstrates the obligatory need for applying an understanding of the cross talk between physicochemical, nano-technological, and biological principles. However, in spite of the large reward, ~2 years after Doxil-related patents expired, there is still no FDA-approved generic "Doxil" available.