Oral drug delivery research in Europe

Novel Targets and Drug Delivery System in the Treatment of Postoperative Pain: Recent Studies and Clinical Advancement

Pain is generated by a small number of peripheral targets. These can be made more sensitive by inflammatory mediators. The number of opioids prescribed to the patients can be reduced dramatically with better pain management. Any therapy that safely and reliably provides extended analgesia and is flexible enough to facilitate a diverse array of release profiles would be useful for improving patient comfort, quality of care, and compliance after surgical procedures. Comparisons are made between new and traditional methods, and the current state of development has been discussed; taking into account the availability of molecular and cellular level data, preclinical and clinical data, and early post-market data. There are a number of benefits associated with the use of nanotechnology in the delivery of analgesics to specific areas of the body. Nanoparticles are able to transport drugs to inaccessible bodily areas because of their small molecular size. This review focuses on targets that act specifically or primarily on sensory neurons, as well as inflammatory mediators that have been shown to have an analgesic effect as a side effect of their anti- inflammatory properties. New, regulated post-operative pain management devices that use existing polymeric systems were presented in this article, along with the areas for potential development. Analgesic treatments, both pharmacological and non-pharmacological, have also been discussed.

Transformative Materials for Interfacial Drug Delivery

Drug delivery systems (DDS) are designed to temporally and spatially control drug availability and activity. They assist in improving the balance between on-target therapeutic efficacy and off-target toxic side effects. DDS aid in overcoming biological barriers encountered by drug molecules upon applying them via various routes of administration. They are furthermore increasingly explored for modulating the interface between implanted (bio)medical materials and host tissue. Herein, an overview of the biological barriers and host-material interfaces encountered by DDS upon oral, intravenous, and local administration is provided, and material engineering advances at different time and space scales to exemplify how current and future DDS can contribute to improved disease treatment are highlighted.

Neonatal Fc receptor-targeted lignin-encapsulated porous silicon nanoparticles for enhanced cellular interactions and insulin permeation across the intestinal epithelium

Oral insulin delivery could change the life of millions of diabetic patients as an effective, safe, easy-to-use, and affordable alternative to insulin injections, known by an inherently thwarted patient compliance. Here, we designed a multistage nanoparticle (NP) system capable of circumventing the biological barriers that lead to poor drug absorption and bioavailability after oral administration. The nanosystem consists of an insulin-loaded porous silicon NP encapsulated into a pH-responsive lignin matrix, and surface-functionalized with the Fc fragment of immunoglobulin G, which acts as a targeting ligand for the neonatal Fc receptor (FcRn). The developed NPs presented small size (211 ± 1 nm) and narrow size distribution. The NPs remained intact in stomach and intestinal pH conditions, releasing the drug exclusively at pH 7.4, which mimics blood circulation. This formulation showed to be highly cytocompatible, and surface plasmon resonance studies demonstrated that FcRn-targeted NPs present higher capacity to interact and being internalized by the Caco-2 cells, which express FcRn, as demonstrated by Western blot. Ultimately, in vitro permeability studies showed that Fc-functionalized NPs induced an increase in the amount of insulin that permeated across a Caco-2/HT29-MTX co-culture model, showing apparent permeability coefficients (P_app) of 2.37 × 10⁻⁶ cm/s, over the 1.66 × 10⁻⁶ cm/s observed for their non-functionalized counterparts. Overall, these results demonstrate the potential of these NPs for oral delivery of anti-diabetic drugs.

•

Multistage nanoparticle (NP) system targeted for the neonatal Fc receptor (FcRn) aimed at oral insulin delivery.

•

NPs released insulin under precisely controlled pH conditions.

•

FcRn expression in the cell culture model used was demonstrated by Western blot.

•

FcRn-targeted NPs presented higher capacity to interact with the intestinal cells.

•

Increased insulin permeation was obtained when using Fc-functionalized NPs.

Molecular simulation of the diffusion mechanism of nanorods in cross-linked networks

We study the diffusion of rod-shaped nanocarriers with different rigidities and aspect ratios in cross-linked networks using coarse-grained molecular dynamics (CGMD) simulations. The diffusivity of the nanorods increases with a reduction in the rigidities of the nanorods and network, as well as with an increasing aspect ratio with respect to the same volume fraction of the nanorods. The nanorods show an anisotropic diffusion pathway through translocating along their major axes at short time scales, and the anisotropy of diffusion decreases at long time scales. Meanwhile, the diffusion of the nanorods shows a sub-diffusion regime that deviates from Brownian motion in most cases due to the trapping of the nanorods in a cage composed of the network. The nanorod could hop when it escapes from the cage and the hopping behavior depends on the rigidities of both the nanorod and network, as well as the local network density. The rotational motion of the trapped nanorod also enhances the probability of hopping. Our results may help in the understanding of the microscopic mechanism for the diffusion of rod-shaped and other relevant nanocarriers, in a cross-linked network environment.

Metal-organic frameworks for advanced drug delivery

Metal-organic frameworks (MOFs), comprised of organic ligands and metal ions/metal clusters via coordinative bonds are highly porous, crystalline materials. Their tunable porosity, chemical composition, size and shape, and easy surface functionalization make this large family more and more popular for drug delivery. There is a growing interest over the last decades in the design of engineered MOFs with controlled sizes for a variety of biomedical applications. This article presents an overall review and perspectives of MOFs-based drug delivery systems (DDSs), starting with the MOFs classification adapted for DDSs based on the types of constituting metals and ligands. Then, the synthesis and characterization of MOFs for DDSs are developed, followed by the drug loading strategies, applications, biopharmaceutics and quality control. Importantly, a variety of representative applications of MOFs are detailed from a point of view of applications in pharmaceutics, diseases therapy and advanced DDSs. In particular, the biopharmaceutics and quality control of MOFs-based DDSs are summarized with critical issues to be addressed. Finally, challenges in MOFs development for DDSs are discussed, such as biostability, biosafety, biopharmaceutics and nomenclature.

Therapeutic targeting of the oncogenic Wnt signaling pathway for treating colorectal cancer and other colonic disorders

The canonical Wnt pathway is one of the key cellular signaling cascades that regulates, via the transcriptional co-activator β-catenin, numerous embryogenic developmental processes, as well as tissue homeostasis. It is therefore not surprising that misregulation of the Wnt/β-catenin pathway has been implicated in carcinogenesis. Aberrant Wnt signaling has been reported in a variety of malignancies, and its role in both hereditary and sporadic colorectal cancer (CRC), has been the subject of intensive study. Interestingly, the vast majority of colorectal tumors harbor mutations in the tumor suppressor gene adenomatous polyposis coli (APC). The Wnt pathway is complex, and despite decades of research, the mechanisms that underlie its functions are not completely known. Thus, although the Wnt cascade is an attractive target for therapeutic intervention against CRC, one of the malignancies with the highest morbidity and mortality rates, achieving efficacy and safety is yet extremely challenging. Here, we review the current knowledge of the Wnt different epistatic signaling components and the mechanism/s by which the signal is transduced in both health and disease, focusing on CRC. We address some of the important questions in the field and describe various therapeutic strategies designed to combat unregulated Wnt signaling, the development of targeted therapy approaches and the emerging challenges that are associated with these advanced methods.

Recent Advances in the Structural Design of Photosensitive Agent Formulations Using "Soft" Colloidal Nanocarriers

The growing demand for effective delivery of photosensitive active compounds has resulted in the development of colloid chemistry and nanotechnology. Recently, many kinds of novel formulations with outstanding pharmaceutical potential have been investigated with an expansion in the design of a wide variety of "soft" nanostructures such as simple or multiple (double) nanoemulsions and lipid formulations. The latter can then be distinguished into vesicular, including liposomes and "smart" vesicles such as transferosomes, niosomes and ethosomes, and non-vesicular nanosystems with solid lipid nanoparticles and nanostructured lipid carriers. Encapsulation of photosensitive agents such as drugs, dyes, photosensitizers or antioxidants can be specifically formulated by the self-assembly of phospholipids or other amphiphilic compounds. They are intended to match unique pharmaceutic and cosmetic requirements and to improve their delivery to the target site via the most common, i.e., transdermal, intravenous or oral administration routes. Numerous surface modifications and functionalization of the nanostructures allow increasing their effectiveness and, consequently, may contribute to the treatment of many diseases, primarily cancer. An increasing article number is evidencing significant advances in applications of the different classes of the photosensitive agents incorporated in the "soft" colloidal nanocarriers that deserved to be highlighted in the present review.

Engineering of Naproxen Loaded Polymer Hybrid Enteric Microspheres for Modified Release Tablets: Development, Characterization, in silico Modelling and in vivo Evaluation

BACKGROUND

Naproxen (NP) is a non-steroidal anti-inflammatory drug with poor aqueous solubility and low oral bioavailability, which may lead to therapeutic failure. NP causes crucial GIT irritation, bleeding, and peptic and duodenal ulcers.

PURPOSE OF THE STUDY

This study aimed to engineer and characterize polymer hybrid enteric microspheres using an integrated (experimental and molecular modelling) approach with further development to solid dosage form with modified drug release kinetics and improved bioavailability.

MATERIALS AND METHODS

NP loaded polymer hybrid enteric microspheres (PHE-Ms) were fabricated by using a modified solvent evaporation technique coupled with molecular modelling (MM) approach. The PHE-Ms were characterized by particle size, distribution, morphology, crystallinity, EE, drug-polymer compatibility, and DSC. The optimized NP loaded PHE-Ms were further subjected to downstream procedures including tablet dosage form development, stability studies and comparative in vitro-in vivo evaluation.

RESULTS

The hydrophobic polymer EUD-L100 and hydrophilic polymer HPMC-E5 delayed and modified drug release at intestinal pH while imparting retardation of NP release at gastric pH to diminish the gastric side effects. The crystallinity of the NP loaded PHE-Ms was established through DSC and P (XRD). The particle size for the developed formulations of PEH-Ms (M1-M5) was in the range from 29.06 ±7.3-74.31 ± 17.7 μm with Span index values of 0.491-0.69, respectively. The produced NP hybrid microspheres demonstrated retarded drug release at pH 1.2 and improved dissolution at pH 6.8. The in vitro drug release patterns were fitted to various release kinetic models and the best-followed model was the Higuchi model with a release exponent "n" value > 0.5. Stability studies at different storage conditions confirmed stability of the NP loaded PHE-Ms based tablets (P<0.05). The molecular modelling (MM) study resulted in adequate binding energy of co-polymer complex SLS-Eudragit-HPMC-Naproxen (-3.9 kcal/mol). In contrast to the NP (unprocessed) and marketed formulations, a significant increase in the Cmax of PHE-MT1 (44.41±4.43) was observed.

CONCLUSION

The current study concludes that developing NP loaded PHE-Ms based tablets could effectively reduce GIT consequences with restored therapeutic effects. The modified release pattern could improve the dissolution rate and enhancement of oral bioavailability. The MM study strengthens the polymer-drug relationship in microspheres.

Anionic nanoparticles enable the oral delivery of proteins by enhancing intestinal permeability

The oral delivery of bioactive peptides and proteins is prevented by the intestinal epithelial barrier, in which intercellular tight junction complexes block the uptake of macromolecules. Here we show that anionic nanoparticles induce tight junction relaxation, increasing intestinal permeability and enabling the oral delivery of proteins. This permeation-enhancing effect is a function of nanoparticle size and charge, with smaller (≤ 200 nm) and more negative particles (such as silica) conferring enhanced permeability. In healthy mice, silica nanoparticles enabled the oral delivery of insulin and exenatide, with 10 U kg-1 orally delivered insulin sustaining hypoglycaemia for a few hours longer than a 1 U kg-1 dose of subcutaneously injected insulin. In healthy, hyperglycaemic and diabetic mice, the oral delivery of 10 U kg-1 insulin led to a dose-adjusted bioactivity of, respectively, 35%, 29% and 23% that of the subcutaneous injection of 1 U kg-1 insulin. The permeation-enhancing effect of the nanoparticles was reversible, non-toxic, and attributable to the binding to integrins on the surface of epithelial cells.

In vitro testing of flash-frozen sublingual membranes for storage and reproducible permeability studies of macromolecular drugs from solution or nanofiber mats

Sublingual drug delivery allows systemic delivery of drug without difficulties connected with the gastrointestinal pathway. We developed a new simple protocol for easy-to-use processing and storage of porcine sublingual mucosal membrane for in vitro studies using "flash freezing" in liquid nitrogen. All the dextrans used as mucosal membrane integrity and permeability markers permeated only slowly through sublingual mucosa illustrating usability both the "fresh" and "flash frozen" sublingual membranes whereas conventional cold storage "frozen" membranes have shown significantly higher permeabilities for macromolecules due to the sustained damage. The permeability values were too low to expect dextrans to be potential carriers at this context. To test albumin as a drug carrier we compared FITC-albumin permeation from solutions vs. nanofiber mats donors. To increase the amounts and prolong the transport, we manufactured nanofiber mats loaded with fluorescently marked albumin using well-scalable electrospinning technology. Nanofiber mats have allowed albumin passage through the sublingual membrane in similar amounts as from the pure artificial saliva solution. Since salivary washout strictly limits the duration of liquid dosages, nanofiber mats may thus permit prolonged sublingual administration.

Advanced Analgesic Drug Delivery and Nanobiotechnology

Transdermal administration of analgesic medications offers several benefits over alternative routes of administration, including a decreased systemic drug load with fewer side effects, and avoidance of drug degradation by the gastrointestinal tract. Transdermal administration also offers a convenient mode of drug administration over an extended period of time, particularly desirable in pain medicine. A transdermal administration route may also offer increased safety for drugs with a narrow therapeutic window. The primary barrier to transdermal drug absorption is the skin itself. Transdermal nanotechnology offers a novel method of achieving enhanced dermal penetration with an extended delivery profile for analgesic drugs, due to their small size and relatively large surface area. Several materials have been used to enhance drug duration and transdermal penetration. The application of nanotechnology in transdermal delivery of analgesics has raised new questions regarding safety and ethical issues. The small molecular size of nanoparticles enables drug delivery to previously inaccessible body sites. To ensure safety, the interaction of nanoparticles with the human body requires further investigation on an individual drug basis, since different formulations have unique properties and side effects.

Preparation, characterization, and evaluation of amphotericin B-loaded MPEG-PCL-g-PEI micelles for local treatment of oral Candida albicans

Fatal Candida albicans infections in the mucosal system can occur in association with immune-compromised diseases and dysbacteriosis. Currently, amphotericin B (AmB) is considered to be the most effective antibiotic in the treatment of C. albicans infections, but its clinical application is limited by side effects and poor bioavailability. In order to use AmB in the local treatment of oral C. albicans infections, AmB/MPEG-PCL-g-PEI (monomethoxy poly(ethylene glycol)-poly(epsilon-caprolactone)-graft-polyethylenimine, MPP) micelles were prepared. A series of characterizations were performed. The micelles allowed a sustained in vitro release in both normal oral conditions (pH 6.8) and C. albicans infection conditions (pH 5.8). Then, buccal tablets containing freeze-dried powder of AmB/MPP micelles were produced by direct compression process and evaluated as regards to weight variation, hardness, and friability. In vitro drug release of the buccal tablets was measured in both the United States Pharmacopeia dissolution apparatus and the dissolution rate test apparatus, which was previously designed for simulating in vivo conditions of the oral cavity. The buccal tablets could sustainably release within 8 h and meet the antifungal requirements. Regarding safety assessment of AmB/MPP micelles, in vivo histopathological data showed no irritation toward buccal mucosa of the rats in both optical microscopy and ultrastructure observation of the tissues. MTT experiment proved that AmB/MPP micelles reduced the cytotoxicity of AmB. The micelles delivered through the gastrointestinal route were also found to be non-systemic toxicity by liquid chromatography-mass spectrometry analysis. Furthermore, the antifungal action of AmB/MPP micelles was evaluated. Although AmB/MPP had no obvious improvement as compared to AmB alone in the antifungal effect on planktonic C. albicans, the micelles significantly enhanced the antifungal activity against the biofilm state of C. albicans. Thus, it was concluded that AmB/MPP micelles represent a promising novel drug delivery system for the local treatment of oral C. albicans infections.

Age-appropriate and acceptable paediatric dosage forms: Insights into end-user perceptions, preferences and practices from the Children's Acceptability of Oral Formulations (CALF) Study

A lack of evidence to guide the design of age-appropriate and acceptable dosage forms has been a longstanding knowledge gap in paediatric formulation development. The Children's Acceptability of Oral Formulations (CALF) study captured end-user perceptions and practices with a focus on solid oral dosage forms, namely tablets, capsules, chewables, orodispersibles, multiparticulates (administered with food) and mini-tablets (administered directly into the mouth). A rigorous development and testing phase produced age-adapted questionnaires as measurement tools with strong evidence of validity and reliability. Overall, 590 school children and adolescents, and 428 adult caregivers were surveyed across hospitals and various community settings. Attitudes towards dosage forms primarily differed based on age and prior use. Positive attitudes to tablets and capsules increased with age until around 14 years. Preference was seen for chewable and orodispersible preparations across ages, while multiparticulates were seemingly less favourable. Overall, 59.6% of school children reported willingness to take 10mm diameter tablets, although only 32.1% of caregivers perceived this size to be suitable. While not to be taken as prescriptive guidance, the results of this study provide some evidence towards rational dosage form design, as well as methodological approaches to help design tools for further evaluation of acceptability within paediatric studies.

Antibacterial active open-porous hydroxyapatite/lysozyme scaffolds suitable as bone graft and depot for localised drug delivery

An engineered synthetic scaffold for bone regeneration should provide temporary structural support and a medium for controlled and localised release of bioavailable medical drugs. In this work, a method is proposed to incorporate biologically active agents without impairing agent activity into open-porous resorbable hydroxyapatite scaffolds. Scaffolds are obtained by a one-pot freeze gelation process and loaded with different amounts of lysozyme, a model macromolecular drug with antibacterial activity. The antibacterial activity is tested by submerging hydroxyapatite scaffolds with 0.5 to 2.5 wt.% lysozyme into two different bacteria stock solutions. A complete dieback of M. luteus bacteria when in contact with the scaffolds is observed. Higher lysozyme amount in the scaffold leads to faster dieback. In contact with scaffolds containing 2.5 wt.% lysozyme after 30 min, no viable bacteria can be observed. An amount of 0.5 wt.% lysozyme in the scaffolds is sufficient to kill all bacteria after a contact time of 24 h. For L. innocua, a bacteriostatic effect is observed. The scaffolds have spongiosa-like stability and are suitable bone implant substitutes. As agents are released from the scaffolds by degrees over a time period of at least 9 days, they are particularly attractive as depot for localised drug delivery of bioactive macromolecular drugs.

A Mouse Intra-Intestinal Infusion Model and its Application to the Study of Nanoparticle Distribution

The oral route is the most preferable one when it comes to drug administration. Different animal models have been used to characterize the fate of potential medicines upon oral delivery but fail to clarify specific events occurring at localized sites of the gastrointestinal tract, particularly at the small intestine. We developed a new mouse intra-intestinal infusion model that enabled the direct administration of substances (such as drugs or nanoparticle drug carriers) in the small intestine through an implanted catheter, which can be maintained for prolonged periods of time. The location of catheter insertion can be previously determined as more proximal or distal, allowing to test specific portions of the intestine. Since the model is presumably able to maintain normal physiological characteristics, namely the mucus coating of the intestinal wall, it allowed studying the distribution of different nanoparticles upon localized intra-intestinal administration. The hereby proposed mouse model has the potential to be useful in other types of studies, namely in clarifying localized processes occurring at specific sites of the intestine.

Role of nanoparticle size, shape and surface chemistry in oral drug delivery

Nanoparticles find intriguing applications in oral drug delivery since they present a large surface area for interactions with the gastrointestinal tract and can be modified in various ways to address the barriers associated with oral delivery. The size, shape and surface chemistry of nanoparticles can greatly impact cellular uptake and efficacy of the treatment. However, the interplay between particle size, shape and surface chemistry has not been well investigated especially for oral drug delivery. To this end, we prepared sphere-, rod- and disc-shaped nanoparticles and conjugated them with targeting ligands to study the influence of size, shape and surface chemistry on their uptake and transport across intestinal cells. A triple co-culture model of intestinal cells was utilized to more closely mimic the intestinal epithelium. Results demonstrated higher cellular uptake of rod-shaped nanoparticles in the co-culture compared to spheres regardless of the presence of active targeting moieties. Transport of nanorods across the intestinal co-culture was also significantly higher than spheres. The findings indicate that nanoparticle-mediated oral drug delivery can be potentially improved with departure from spherical shape which has been traditionally utilized for the design of nanoparticles. We believe that understanding the role of nanoparticle geometry in intestinal uptake and transport will bring forth a paradigm shift in nanoparticle engineering for oral delivery and non-spherical nanoparticles should be further investigated and considered for oral delivery of therapeutic drugs and diagnostic materials.

Recent advances in liposome surface modification for oral drug delivery

Oral delivery via the gastrointestinal (GI) tract is the dominant route for drug administration. Orally delivered liposomal carriers can enhance drug solubility and protect the encapsulated theraputic agents from the extreme conditions found in the GI tract. Liposomes, with their fluid lipid bilayer membrane and their nanoscale size, can significantly improve oral absorption. Unfortunately, the clinical applications of conventional liposomes have been hindered due to their poor stability and availability under the harsh conditions typically presented in the GI tract. To overcome this problem, the surface modification of liposomes has been investigated. Although liposome surface modification has been extensively studied for oral drug delivery, no review exists so far that adequately covers this topic. The purpose of this paper is to summarize and critically analyze emerging trends in liposome surface modification for oral drug delivery.

NANEX: Process design and optimization

Previously, we introduced a one-step nano-extrusion (NANEX) process for transferring aqueous nano-suspensions into solid formulations directly in the liquid phase. Nano-suspensions were fed into molten polymers via a side-feeding device and excess water was eliminated via devolatilization. However, the drug content in nano-suspensions is restricted to 30 % (w/w), and obtaining sufficiently high drug loadings in the final formulation requires the processing of high water amounts and thus a fundamental process understanding. To this end, we investigated four polymers with different physicochemical characteristics (Kollidon(®) VA64, Eudragit(®) E PO, HPMCAS and PEG 20000) in terms of their maximum water uptake/removal capacity. Process parameters as throughput and screw speed were adapted and their effect on the mean residence time and filling degree was studied. Additionally, one-dimensional discretization modeling was performed to examine the complex interactions between the screw geometry and the process parameters during water addition/removal. It was established that polymers with a certain water miscibility/solubility can be manufactured via NANEX. Long residence times of the molten polymer in the extruder and low filling degrees in the degassing zone favored the addition/removal of significant amounts of water. The residual moisture content in the final extrudates was comparable to that of extrudates manufactured without water.

Excised segments of rat small intestine in Ussing chamber studies: A comparison of native and stripped tissue viability and permeability to drugs

Excised rat intestinal tissue mounted in an Ussing chamber can be used for intestinal permeability assessments in drug development. The outer layer of the intestine, the serosa and part of the muscle layer, is traditionally removed since it is considered a barrier to the diffusion of nutrients and oxygen as well as to that of pharmaceutical substances. However, the procedure for removing the serosal-muscle layer, i.e. stripping, is a technically challenging process in the pre-experimental preparation of the tissue which may result in tissue damage and reduced viability of the segment. In this study, the viability of stripped and native (non-stripped) rat small intestine tissue segments mounted in Ussing chambers was monitored and the apparent permeability of the tissue to a set of test compounds across both tissue preparations was determined. Electrical measurements, in particular the potential difference (PD) across the intestinal membrane, were used to evaluate the viability. In this study, there were no differences in initial PD (health status of the tissue) or PD over time (viability throughout the experiment) between native and stripped rat jejunum segments. Overall, there were also no significant differences in permeability between stripped and native rat intestinal tissue for the compounds in this study. Based on these results, we propose that stripping can be excluded from the preparation procedures for rat jejunal tissue for permeability studies when using the Ussing chamber technique.

Advances in oral controlled drug delivery: the role of drug-polymer and interpolymer non-covalent interactions

INTRODUCTION

After more than four decades of intense research, oral controlled drug delivery systems (DDSs) still represent a topic of major interest for pharmaceutical scientist and formulators. This can be explained in part by considering the economic value of oral DDSs whose market accounts for more than half of the overall drug delivery market. Polymeric systems based on drug-polymer non-covalent interaction represent a limited, but growing part of the field. Despite the large amount of literature and published reviews covering specific aspects, there is still need for a review of the relevant literature providing a general picture of the topic.

AREAS COVERED

The present review aims at presenting the latest findings in drug-polymer and interpolymer non-covalent interactions in oral controlled delivery while providing a specific perspective and a critical point of view, particularly on the tools and methods used for the study of these DDSs. Four main sections are considered: i) ionic interactions between drugs and polymers; ii) interpolymer complexes; iii) hydrogen bond; and iv) hydrophobic interactions.

EXPERT OPINION

The largest part of the scientific literature deals with systems based on drug-polymer ionic interactions while hydrogen bonding and hydrophobic interaction though, very promising, are more difficult to exploit, and therefore less studied. An accurate and exhaustive representation of the specific role of the chemical functions in establishing predictable interactions between drug and polymers is still required.

Toward pH-responsive coating materials--high-throughput study of (meth)acrylic copolymers

The release behavior of a model compound (β-naphthol orange) encapsulated in (meth)acrylate-based statistical copolymers under different environmental conditions was investigated. From monomers of varying polarity (methyl acrylate, ethyl acrylate, tert-butyl acrylate, 2-ethylhexyl methacrylate, and benzyl methacrylate) in combination with methacrylic acid, five polymer series were synthesized by free radical polymerization. The pH-dependent release kinetics were investigated via UV-vis spectroscopy at pH 1.2 and 6.8, simulating physiological conditions in the stomach and intestines. Furthermore, the influence of different ethanol contents (0 and 40 vol %) in the acidic medium was investigated. The whole approach was designed to meet the requirements of a high-throughput experimentation workflow.

Favorable acceptance of mini-tablets compared with syrup: a randomized controlled trial in infants and preschool children

OBJECTIVE

To evaluate acceptability of 2 mm solid dosage forms (mini-tablets) as an alternative administration modality in young children in comparison with syrup.

STUDY DESIGN

Three hundred six pediatric in- and outpatients aged 6 months-5 years (51 in each of 6 age groups) were recruited. An open, randomized cross-over study was conducted to compare acceptability and capability to swallow 2 mm uncoated or coated mini-tablets vs 3 mL syrup.

RESULTS

In the overall patient population of 306 children, the acceptability of uncoated mini-tablets was superior to syrup (difference in proportions 14.8%, 95% CI 10.2-19.4; P < .0001). In line with this finding, the level of capability to swallow was higher for uncoated mini-tablets compared with syrup as well (difference in proportions 12.3%, 95% CI 5.4-19.3; P = .0008). All 3 pharmaceutical formulations were well tolerated, and none of the 306 children inhaled or coughed because of the syrup or the uncoated mini-tablet; only 2 of the 306 children (both in age group 0.5-1 year) coughed because of the coated mini-tablet, in both cases without clinical relevance.

CONCLUSIONS

Mini-tablets are a valuable alternative to syrup for children 6 months-6 years of age and are more acceptable compared with liquid formulation. Regulatory bodies such as Food and Drug Administration and European Medicine Agency are encouraged to take our data into account for guideline updates and future drug approval processes.

Water-Dilutable Biocompatible Microemulsion Systems: Design and Characterisation

The present study describes a screening approach in design of microemulsion preconcentrates (self-microemulsifying systems) comprising: PEG-8 caprylic/capric glycerides (Labrasol®) (surfactant), PEG-40 hydrogenated castor oil (Cremophor® RH40) (cosurfactant) (at surfactant-to-cosurfactant mass ratios 9:1, 7:3, 5:5, 3:7 and 1:9), and 10% w/w or 20% w/w of medium-chain triglycerides or olive oil (oil). The self-microemulsifying ability of the prepared surfactant/cosurfactant/oil mixtures in water and 0.1 M HCl (pH 1.2), was evaluated by droplet size and zeta potential analysis and cross-polarized light microscopy. The formation of microemulsions was observed only in the presence of medium-chain triglycerides at surfactant-to-cosurfactant ratios 7:3 and 5:5 (in the mixtures containing 10% w/w of the oil phase) and 3:7 and 1:9 (when 20% w/w of the same oil was used). The obtained results provide new implications for development of microemulsion preconcentrates suitable as delivery systems for food and pharmaceutical applications.

Targeted nanoparticles with novel non-peptidic ligands for oral delivery

Orally administered targeted nanoparticles have a large number of potential biomedical applications and display several putative advantages for oral drug delivery, such as the protection of fragile drugs or modification of drug pharmacokinetics. These advantages notwithstanding, oral drug delivery by nanoparticles remains challenging. The optimization of particle size and surface properties and targeting by ligand grafting have been shown to enhance nanoparticle transport across the intestinal epithelium. Here, different grafting strategies for non-peptidic ligands, e.g., peptidomimetics, lectin mimetics, sugars and vitamins, that are stable in the gastrointestinal tract are discussed. We demonstrate that the grafting of these non-peptidic ligands allows nanoparticles to be targeted to M cells, enterocytes, immune cells or L cells. We show that these grafted nanoparticles could be promising vehicles for oral vaccination by targeting M cells or for the delivery of therapeutic proteins. We suggest that targeting L cells could be useful for the treatment of type 2 diabetes or obesity.

Oral colon-specific therapeutic approaches toward treatment of inflammatory bowel disease

INTRODUCTION

Inflammatory bowel disease (IBD) is a chronic relapsing idiopathic disease. In clinical terms, most patients require lifelong medication associated with possible unpleasant adverse effects. Oral colon-specific drug delivery systems are designed to deliver therapeutic drugs to the inflamed colon to target pathophysiological manifestations of IBD. The aim is to maintain the drug with proper concentration in the inflamed colon, to enhance drug residence time and to minimize drug absorption by healthy tissues.

AREAS COVERED

This review addresses the main barriers for colon-specific drug delivery from organism, tissue and cell levels, respectively. It also summarizes novel colon-specific therapeutic strategies using microparticles and nanoparticles.

EXPERT OPINION

Oral colon-specific drug delivery represents a possible approach toward efficient treatment of IBD. As the environment of the gastrointestinal tract is harsh and intricate, this approach requires that drug carriers can respond to specific environmental factors of the inflamed colon, permitting stimulus-responsive release of loaded drugs to specific cells or even into specific organelles within cells.

Drug nano-domains in spray-dried ibuprofen-silica microspheres

Silica microspheres encapsulating ibuprofen in separated domains at the nanometre scale are formed by spray-drying and sol-gel processes. A detailed (1)H and (13)C NMR study of these microspheres shows that ibuprofen molecules are mobile and are interacting through hydrogen bonds with other ibuprofen molecules. (1)H magnetisation exchange NMR experiments were employed to characterize the size of the ibuprofen domains at the nanometre scale. These domains are solely formed by ibuprofen, and their diameters are estimated to be ∼40 nm in agreement with TEM observations. The nature and formation of these particular texture and drug dispersion are discussed.

A win-win solution in oral delivery of lipophilic drugs: supersaturation via amorphous solid dispersions increases apparent solubility without sacrifice of intestinal membrane permeability

Recently, we have revealed a trade-off between solubility increase and permeability decrease when solubility-enabling oral formulations are employed. We have shown this trade-off phenomenon to be ubiquitous, and to exist whenever the aqueous solubility is increased via solubilizing excipients, regardless if the mechanism involves decreased free fraction (cyclodextrins complexation, surfactant micellization) or simple cosolvent solubilization. Discovering a way to increase drug solubility without concomitant decreased permeability represents a major advancement in oral delivery of lipophilic drugs and is the goal of this work. For this purpose, we sought to elucidate the solubility-permeability interplay when increased apparent solubility is obtained via supersaturation from an amorphous solid dispersion (ASD) formulation. A spray-dried ASD of the lipophilic drug progesterone was prepared in the hydrophilic polymer hydroxypropyl methylcellulose acetate succinate (HPMC-AS), which enabled supersaturation up to 4× the crystalline drug's aqueous solubility (8 μg/mL). The apparent permeability of progesterone from the ASD in HPMC-AS was then measured as a function of increasing apparent solubility (supersaturation) in the PAMPA and rat intestinal perfusion models. In contrast to previous cases in which apparent solubility increases via cyclodextrins, surfactants, and cosolvents resulted in decreased apparent permeability, supersaturation via ASD resulted in no decrease in apparent permeability with increasing apparent solubility. As a result, overall flux increased markedly with increasing apparent solubility via ASD as compared to the other formulation approaches. This work demonstrates that supersaturation via ASDs has a subtle yet powerful advantage over other solubility-enabling formulation approaches. That is, increased apparent solubility may be achieved without the expense of apparent intestinal membrane permeability. Thus, supersaturation via ASDs presents a markedly increased opportunity to maximize overall oral drug absorption.