In situ gelling pH- and temperature-sensitive biodegradable block copolymer hydrogels for drug delivery

Hydrogels Based on Polyelectrolyte Complexes: Underlying Principles and Biomedical Applications

Ionic complexes of electrostatically charged biomacromolecules are key players in various biological processes like nucleotide transportation, organelle formation, and protein folding. These complexes, abundant in biological systems, contribute to the function, responsiveness, and mechanical properties of organisms. Coherent with these natural phenomena, hydrogels formed through the complexation of oppositely charged polymers exhibit unique attributes, such as rapid self-assembly, hierarchical microstructures, tunable properties, and protective encapsulation. Consequently, polyelectrolyte complex (PEC) hydrogels have garnered considerable interest, emerging as an up-and-coming platform for various biomedical applications. This review outlines the underlying principles governing PEC hydrogels. The classification of polyelectrolytes and the self-assembly of PEC hydrogels are discussed, including the factors influencing their self-assembly process. Recent developments of PEC hydrogels for biomedical applications, including drug delivery, tissue engineering, wound healing and management, and wearable sensors, are summarized. This review concludes with the prospective directions for the next generation of PEC hydrogel research.

Modular Synthetic Platform to Tailor Therapeutic-Specific Delivery in Injectable Hydrogels

Injectable thermoresponsive hydrogels (thermogels), valued for their conformability and minimal invasiveness, are increasingly used as in situ forming implants for drug delivery and as regenerative scaffolds. These gels exhibit sol-to-gel phase transitions at body temperature. As localized depots and scaffolds, these gels determine the chemical and mechanical environments and could dramatically influence the release kinetics of drugs or the fate of cells. Current synthetic approaches for thermogels, however, often limit the ability to fully exploit interactions between the thermogel matrix and the encapsulated agent. In this study, we introduce a modular synthetic platform for creating a library of functionalized polyurethane thermogels that enables customization of gelation properties and intermolecular interactions. These thermogels can exhibit a wide range of stiffness, offer complementary ionic interactions, and enhance hydrophobic interactions and hydrogen bonding. By leveraging these tunable interactions between the thermogelling scaffold, functional groups, and encapsulated agents, we achieved sustained and controlled release, from days to over 6 months, for both low and high molecular weight drug analogs. Release profiles varied from monophasic to biphasic and triphasic depending on the compatibility between the thermogel properties and the encapsulated agents. The design rules identified here support the development of drug-specific formulations, facilitating precise, sustained, and modulated release tailored to therapeutic needs. Beyond providing an adaptable strategy for customizable injectable drug depots, this synthetic strategy lays the groundwork for future iterations of multi stimuli-responsive thermogels with enhanced bioactivity, advancing the potential for customizable, biointeractive therapeutic systems.

Advances in Injectable Hydrogels Based on Diverse Gelation Methods for Biomedical Imaging

The injectable hydrogels can deliver the loads directly to the predetermined sites and form reservoirs to increase the enrichment and retention of the loads in the target areas. The preparation and injection of injectable hydrogels involve the sol-gel transformation of hydrogels, which is affected by factors such as temperature, ions, enzymes, light, mechanics (self-healing property), and pH. However, tracing the injection, degradation, and drug release from hydrogels based on different ways of gelation is a major concern. To solve this problem, contrast agents are introduced into injectable hydrogels, enabling the hydrogels to be imaged under techniques such as fluorescence imaging, photoacoustic imaging, magnetic resonance imaging, and radionuclide imaging. This review details methods for causing the gelation of imageable hydrogels; discusses the application of injectable hydrogels containing contrast agents in various imaging techniques, and finally explores the potential and challenges of imageable hydrogels based on different modes of gelation.

Biomaterial-Based Sustained-Release Drug Formulations for Localized Cancer Immunotherapy

Cancer immunotherapy has revolutionized clinical cancer treatments by taking advantage of the immune system to selectively and effectively target and kill cancer cells. However, clinical cancer immunotherapy treatments often have limited efficacy and/or present severe adverse effects associated primarily with their systemic administration. Localized immunotherapy has emerged to overcome these limitations by directly targeting accessible tumors via local administration, reducing potential systemic drug distribution that hampers drug efficacy and safety. Sustained-release formulations can prolong drug activity at target sites, which maximizes the benefits of localized immunotherapy to increase the therapeutic window using smaller dosages than those used for systemic injection, avoiding complications of frequent dosing. The performance of sustained-release formulations for localized cancer immunotherapy has been validated preclinically using various implantable and injectable scaffold platforms. This review introduces the sustained-release formulations developed for localized cancer immunotherapy and highlights their biomaterial-based platforms for representative classes, including inorganic scaffolds, natural hydrogels, synthetic hydrogels, and microneedle patches. The design rationale and other considerations are summarized for further development of biomaterials for the construction of optimal sustained-release formulations.

Chemically Programmed Hydrogels for Spatiotemporal Modulation of the Cardiac Pathological Microenvironment

After myocardial infarction (MI), sustained ischemic events induce pathological microenvironments characterized by ischemia-hypoxia, oxidative stress, inflammatory responses, matrix remodeling, and fibrous scarring. Conventional clinical therapies lack spatially targeted and temporally responsive modulation of the infarct microenvironment, leading to limited myocardial repair. Engineered hydrogels have a chemically programmed toolbox for minimally invasive localization of the pathological microenvironment and personalized responsive modulation over different pathological periods. Chemically programmed strategies for crosslinking interactions, interfacial binding, and topological microstructures in hydrogels enable minimally invasive implantation and in situ integration tailored to the myocardium. This enhances substance exchange and signal interactions within the infarcted microenvironment. Programmed responsive polymer networks, intelligent micro/nanoplatforms, and biological therapeutic cues contribute to the formation of microenvironment-modulated hydrogels with precise targeting, spatiotemporal control, and on-demand feedback. Therefore, this review summarizes the features of the MI microenvironment and chemically programmed schemes for hydrogels to conform, integrate, and modulate the cardiac pathological microenvironment. Chemically programmed strategies for oxygen-generating, antioxidant, anti-inflammatory, provascular, and electrointegrated hydrogels to stimulate iterative and translational cardiac tissue engineering are discussed.

Biomimetic Hydrogels as the Inductive Endochondral Ossification Template for Promoting Bone Regeneration

Repairing critical size bone defects (CSBD) is a major clinical challenge and requires effective intervention by biomaterial scaffolds. Inspired by the fact that the cartilaginous template-based endochondral ossification (ECO) process is crucial to bone healing and development, developing biomimetic biomaterials to promote ECO is recognized as a promising approach for repairing CSBD. With the unique highly hydrated 3D polymeric network, hydrogels can be designed to closely emulate the physiochemical properties of cartilage matrix to facilitate ECO. In this review, the various preparation methods of hydrogels possessing the specific physiochemical properties required for promoting ECO are introduced. The materiobiological impacts of the physicochemical properties of hydrogels, such as mechanical properties, topographical structures and chemical compositions on ECO, and the associated molecular mechanisms related to the BMP, Wnt, TGF-β, HIF-1α, FGF, and RhoA signaling pathways are further summarized. This review provides a detailed coverage on the materiobiological insights required for the design and preparation of hydrogel-based biomaterials to facilitate bone regeneration.

Preparation of Liposome Gel by Calcium Cross-Linking Induces the Long-Term Release of DOX to Improve the Antitumor Effect

Doxorubicin (DOX) is one of the most commonly used anticancer drugs; however, its clinical application is greatly limited due to its toxicity and chemotherapy resistance. The delivery of DOX by liposomes (Lipos) can improve the blood circulation time in vivo and reduce toxic side effects, but the drug's accumulation in the tumor is often insufficient for effective treatment. In this study, we present a calcium cross-linked liposome gel for the encapsulation of DOX, demonstrating its superior long-term release capabilities compared to conventional Lipos. By leveraging this enhanced long-term release, we can enhance drug accumulation within tumors, ultimately leading to improved antitumor efficacy. Lipos were prepared using the thin-film dispersion method in this study. We utilized the ion-responsiveness of glutathione-gelatin (GSH-GG) to form the gel outside the Lipos and named the nanoparticles coated with GSH-GG on the outside of Lipos as Lipos@GSH-GG. The average size of Lipos@GSH-GG was around 342.9 nm, with a negative charge of -25.6 mV. The in vitro experiments revealed that Lipos@GSH-GG exhibited excellent biocompatibility and slower drug release compared to conventional Lipos. Further analysis of cellular uptake and cytotoxicity demonstrated that Lipos@GSH-GG loading DOX (DOX&Lipos@GSH-GG) exhibited superior long-term release effects and lower toxic side effects compared to Lipos loading DOX (DOX&Lipos). Additionally, the findings regarding the long-term release effect in vivo and the tumor accumulation within tumor-bearing mice of Lipos@GSH-GG suggested that, compared to Lipos, it demonstrated superior long-term release capabilities and achieved greater drug accumulation within tumors. In vivo antitumor efficacy experiments showed that DOX&Lipos@GSH-GG demonstrated superior antitumor efficacy to DOX&Lipos. Our study highlights Lipos@GSH-GG as a promising nanocarrier with the potential to enhance efficacy and safety by means of long-term release effects and may offer an alternative approach for effective antitumor therapy in the future.

Injectable Thermo-Responsive Peptide Hydrogels and Its Enzyme Triggered Dynamic Self-Assembly

Endogenous stimuli-responsive injectable hydrogels hold significant promise for practical applications due to their spatio-temporal controllable drug delivery. Herein, we report a facile strategy to construct a series of in situ formation polypeptide hydrogels with thermal responsiveness and enzyme-triggered dynamic self-assembly. The thermo-responsive hydrogels are from the diblock random copolymer mPEG-b-P(Glu-co-Tyr). The L-glutamic acid (Glu) segments with different γ-alkyl groups, including methyl, ethyl, and n-butyl, offer specific secondary structure, facilitating the formation of hydrogel. The L-tyrosine (Tyr) residues not only provide hydrogen-bond interactions and thus adjust the sol-gel transition temperatures, but also endow polypeptide enzyme-responsive properties. The PTyr segments could be phosphorylated, and the phosphotyrosine copolymers were amphiphilies, which could readily self-assemble into spherical aggregates and transform into sheet-like structures upon dephosphorylation by alkaline phosphatase (ALP). P(MGlu-co-Tyr/P) and P(MGlu-co-Tyr) copolymers showed good compatibility with both MC3T3-E1 and Hela cells, with cell viability above 80% at concentrations up to 1000 μg/mL. The prepared injectable polypeptide hydrogel and its enzyme-triggered self-assemblies show particular potential for biomedical applications.

Development and characterization of a topical gel, containing lavender (Lavandula angustifolia) oil loaded solid lipid nanoparticles

Gels loaded with nanocarriers offer interesting ways to create novel therapeutic approaches by fusing the benefits of gel and nanotechnology. Clinical studies indicate that lavender oil (Lav-O) has a positive impact on accelerating wound healing properly based on its antimicrobial and anti-inflammatory effects. Initially Lav-O loaded Solid Lipid Nanoparticles (Lav-SLN) were prepared incorporating cholesterol and lecithin natural lipids and prepared SLNs were characterized. Next, a 3% SLN containing topical gel (Lav-SLN-G) was formulated using Carbopol 940. Both Lav-SLN and Lav-SLN-G were assessed in terms antibacterial effects against S. aureus. Lav-SLNs revealed a particle size of 19.24 nm, zeta potential of -21.6 mv and EE% of 75.46%. Formulated topical gel presented an acceptable pH and texture properties. Minimum Inhibitory/Bactericidal Concentration (MIC/MBC) against S. aureus for LAv-O, Lav-SLN and Lav-SLN-G were 0.12 and 0.24 mgml- 1, 0.05 and 0.19 mgml- 1 and 0.045, 0.09 mgml- 1, respectively. Therefore, SLN can be considered as an antimicrobial potentiating nano-carrier for delivery of Lav-O as an antimicrobial and anti-inflammatory agent in topical gel.

Controlling the function of bioactive worm micelles by enzyme-cleavable non-covalent inter-assembly cross-linking

Drugs that form self-assembled supramolecular structures to be most-active is a promising way of creating new highly specific and active pharmaceuticals. Controlling the activity of bioactive supramolecular structures such as drug-loaded micelles is possible by both core/shell and inter-assembly cross-linking. However, if the flexibility of the assembly is mandatory for the activity cross-linking is not feasible. Thus, such structures cannot be manipulated in their activity. The present study demonstrates a novel concept to control the activity of not drug-releasing, non-cross-linked bioactive superstructures. This is achieved by formation of nanostructured nanoparticles derived by non-covalent inter-assembly cross-linking of the superstructures. This is shown on the example of amphiphilic diblock-copolymers conjugated with the antibiotic ciprofloxacin (CIP). These polymer-antibiotic conjugates form worm micelles, which greatly activate the conjugated antibiotic without releasing it. Non-covalent inter-assembly cross-linking of these CIP-worm-micelles with amphiphilic triblock copolymers terminated with lipase-cleavable esters leads to nanostructured nanoparticles that resemble cross-linked worm micelles and show an up to 135-fold lower activity than the free worm micelles. The activity of the worm-micelles can be fully recovered by cleaving the end groups of the polymeric cross-linker with lipase.

Development of injectable in situ hydrogels based on hyaluronic acid via Diels-Alder reaction for their antitumor activities studies

The objective of this study was to develop an injectable hydrogel based on furfuryl amine-conjugated hyaluronic acid (FA-conj-HA) and evaluate the in vivo anti-4 T1 tumor activity of doxorubicin-loaded hydrogel (DOX@FA-conj-HAgel). The cargo-free hydrogel (FA-conj-HAgel) was fabricated through a Diels-Alder reaction at 37 °C with FA-conj-HA as a gel material and four armed poly(ethylene glycol)2000-maleimide (4-arm-PEG2000-Mal) as a cross-linker. The bio-safety of FA-conj-HAgel were assessed, and the in vivo antitumor activity of DOX@FA-conj-HAgel was also investigated. Many 3D network structures were observed from scanning electron microscope (SEM) photograph, confirming the successful preparation of FA-conj-HAgel. The absence of cytotoxicity from FA-conj-HAgel was proved by the high viability of 4 T1 cells. In vivo bio-safety studies suggested that the obtained FA-conj-HAgel did not induce acute toxicity or other lesions in treated mice, confirming its high bio-safety. The reduced tumor volumes, hematoxylin-eosin staining (H&E), and TdT-mediated dUTP-biotin nick end labeling (TUNEL) analysis indicated the potent in vivo anti-4 T1 tumor effects of DOX@FA-conj-HAgel. In conclusion, the favorable bio-safety and potent antitumor activity of DOX@FA-conj-HAgel highlighted its potential application in oncological therapy.

Preparation and antitumor study of intelligent injectable hydrogel: Carboxymethyl chitosan-aldehyde gum Arabic composite graphene oxide hydrogel

In this study, we used polyaldehyde gum Arabic (OGA) and carboxymethyl chitosan (CMCS) as a gel matrix to form an injectable self-healing hydrogel by Schiff-base bonding. Further, graphene oxide (GO) was loaded with doxorubicin (DOX) to the hydrogel, which resulted in a CMCS-OGA/GO@DOX hydrogel. We achieved a DOX drug loading capacity of 43.80 ± 1.13 %. Rheological studies showed that GO hydrogels have improved mechanical properties. The in vitro release profile showed pH responsiveness with 88.21 % DOX release at pH 5.5. Biocompatibility studies showed that the hydrogel composition had good cytocompatibility with L929 cells. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay showed a cell survival rate of 93.88 % within 48 h. The DOX-loaded hydrogel exhibited higher cell mortality in breast cancer cells (4 T1), with an inhibition rate of 79.4 % at 48 h. Acridine orange/ethidium bromide staining experiments on 4 T1 cells showed that when loaded with the same DOX concentration, the hydrogel significantly reduced the toxic effects on normal cells, whereas it had significant cytotoxic effects on cancer cells. This result indicates that the prepared GO hydrogel drug delivery system can serve as a novel approach for localized breast cancer treatment.

In situ forming alginate/gelatin hybrid hydrogels containing doxorubicin loaded chitosan/AuNPs nanogels for the local therapy of breast cancer

In this study, pH-sensitive in situ gelling hydrogels based on oxidized alginate and gelatin-containing doxorubicin (DOX) loaded chitosan/gold nanoparticles (CS/AuNPs) nanogels were fabricated via Schiff-base bond formation. The obtained CS/AuNPs nanogels indicated a size distribution of about 209 nm with a zeta potential of +19.2 mV and an encapsulation efficiency of around 72.6 % for DOX. The study of the rheological properties of hydrogels showed that the value of G' is higher than G″ for all hydrogels, which confirms the elastic behavior of hydrogels in the applied frequency range. The rheological and texture analysis demonstrated the higher mechanical properties of hydrogels containing β-GP and CS/AuNPs nanogels. The release profile of DOX after 48 h indicates the 99 % and 73 % release amount at pH = 5.8 and pH = 7.4, respectively. MTT cytotoxicity study showed that the prepared hydrogels are cytocompatible on MCF-7 cells. By the Live/Dead assay, it was demonstrated that the cultured cells on DOX-free hydrogels were almost alive in the presence of CS/AuNPs nanogels. However, the hydrogel-containing drug and free DOX in the same concentration caused high death of MCF-7 cells as expected, which showed the potential of the developed hydrogels for application in the local treatment of breast cancer.

Injectable hydrogels for cartilage and bone tissue regeneration: A review

Annually, millions of patients suffer from irreversible injury owing to the loss or failure of an organ or tissue caused by accident, aging, or disease. The combination of injectable hydrogels and the science of stem cells have emerged to address this persistent issue in society by generating minimally invasive treatments to augment tissue function. Hydrogels are composed of a cross-linked network of polymers that exhibit a high-water retention capacity, thereby mimicking the wet environment of native cells. Due to their inherent mechanical softness, hydrogels can be used as needle-injectable stem cell carrier materials to mend tissue defects. Hydrogels are made of different natural or synthetic polymers, displaying a broad portfolio of eligible properties, which include biocompatibility, low cytotoxicity, shear-thinning properties as well as tunable biological and physicochemical properties. Presently, novel ongoing developments and native-like hydrogels are increasingly being used broadly to improve the quality of life of those with disabling tissue-related diseases. The present review outlines various future and in-vitro applications of injectable hydrogel-based biomaterials, focusing on the newest ongoing developments of in-situ forming injectable hydrogels for bone and cartilage tissue engineering purposes.

Glucose-Responsive Microgel Comprising Conventional Insulin and Curcumin-Laden Nanoparticles: a Potential Combination for Diabetes Management

Successful management of type 2 diabetes mellitus (T2DM), a complex and chronic disease, requires a combination of anti-hyperglycemic and anti-inflammatory agents. Here, we have conceptualized and tested an integrated "closed-loop mimic" in the form of a glucose-responsive microgel (GRM) based on chitosan, comprising conventional insulin (INS) and curcumin-laden nanoparticles (nCUR) as a potential strategy for effective management of the disease. In addition to mimicking the normal, on-demand INS secretion, such delivery systems display an uninterrupted release of nCUR to combat the inflammation, oxidative stress, lipid metabolic abnormality, and endothelial dysfunction components of T2DM. Additives such as gum arabic (GA) led to a fivefold increased INS loading capacity compared to GRM without GA. The GRMs showed excellent in vitro on-demand INS release, while a constant nCUR release is observed irrespective of glucose concentrations. Thus, this study demonstrates a promising drug delivery technology that can simultaneously, and at physiological/pathophysiological relevance, deliver two drugs of distinct physicochemical attributes in the same formulation.

Building Fucoidan/Agarose-Based Hydrogels as a Platform for the Development of Therapeutic Approaches against Diabetes

Current management for diabetes has stimulated the development of versatile 3D-based hydrogels as in vitro platforms for insulin release and as support for the encapsulation of pancreatic cells and islets of Langerhans. This work aimed to create agarose/fucoidan hydrogels to encapsulate pancreatic cells as a potential biomaterial for diabetes therapeutics. The hydrogels were produced by combining fucoidan (Fu) and agarose (Aga), marine polysaccharides derived from the cell wall of brown and red seaweeds, respectively, and a thermal gelation process. The agarose/fucoidan (AgaFu) blended hydrogels were obtained by dissolving Aga in 3 or 5 wt % Fu aqueous solutions to obtain different proportions (4:10; 5:10, and 7:10 wt). The rheological tests on hydrogels revealed a non-Newtonian and viscoelastic behavior, while the characterization confirmed the presence of the two polymers in the structure of the hydrogels. In addition, the mechanical behavior showed that increasing Aga concentrations resulted in hydrogels with higher Young's modulus. Further, the ability of the developed materials to sustain the viability of human pancreatic cells was assessed by encapsulation of the 1.1B4HP cell line for up to 7 days. The biological assessment of the hydrogels revealed that cultured pancreatic beta cells tended to self-organize and form pseudo-islets during the period studied.

Composite Hydrogels with Included Solid-State Nanoparticles Bearing Anticancer Chemotherapeutics

Hydrogels have many useful physicochemical properties which, in combination with their biocompatibility, suggest their application as a drug delivery system for the local and prorogated release of drugs. However, their drug-absorption capacity is limited because of the gel net's poor adsorption of hydrophilic molecules and in particular, hydrophobic molecules. The absorption capacity of hydrogels can be increased with the incorporation of nanoparticles due to their huge surface area. In this review, composite hydrogels (physical, covalent and injectable) with included hydrophobic and hydrophilic nanoparticles are considered as suitable for use as carriers of anticancer chemotherapeutics. The main focus is given to the surface properties of the nanoparticles (hydrophilicity/hydrophobicity and surface electric charge) formed from metal and dielectric substances: metals (gold, silver), metal-oxides (iron, aluminum, titanium, zirconium), silicates (quartz) and carbon (graphene). The physicochemical properties of the nanoparticles are emphasized in order to assist researchers in choosing appropriate nanoparticles for the adsorption of drugs with hydrophilic and hydrophobic organic molecules.

A pH-sensitive drug delivery using biodegradable succinoglycan/chitosan hydrogels with synergistic antibacterial activity

Since succinoglycan (SG) produced by Sinorhizobium meliloti is an anionic polysaccharide having substituents such as succinate and pyruvate groups, a polyelectrolyte composite hydrogel can be made together with chitosan (CS), a cationic polysaccharide. We fabricated polyelectrolyte SG/CS hydrogels using the semi-dissolving acidified sol-gel transfer (SD-A-SGT) method. The hydrogel showed optimized mechanical strength and thermal stability at an SG:CS weight ratio of 3:1. This optimized SG/CS hydrogel exhibited a high compressive stress of 497.67 kPa at 84.65 % strain and a high tensile strength of 9.14 kPa when stretched to 43.73 %. Additionally, this SG/CS hydrogel showed a pH-controlled drug release pattern for 5-fluorouracil (5-FU), where a change from pH 7.4 to 2.0 increased the release from 60 % to 94 %. In addition, this SG/CS hydrogel not only showed a cell viability of 97.57 %, but also showed synergistic antibacterial activity of 97.75 % and 96.76 % against S. aureus and E. coli, respectively. These results indicate the potential of this hydrogel as a biocompatible and biodegradable hydrogel material for wound healing, tissue engineering, and drug release systems.

Smart stimuli-responsive hydrogels for drug delivery in periodontitis treatment

Periodontitis is a chronic inflammatory disease initiated by pathogenic biofilms and host immunity that damages tooth-supporting tissues, including the gingiva, periodontal ligament and alveolar bone. The physiological functions of the oral cavity, such as saliva secretion and chewing, greatly reduce the residence of therapeutic drugs in the area of a periodontal lesion. In addition, complex and diverse pathogenic mechanisms make effectively treating periodontitis difficult. Therefore, designing advanced local drug delivery systems and rational therapeutic strategies are the basis for successful periodontitis treatment. Hydrogels have attracted considerable interest in the field of periodontitis treatment due to their biocompatibility, biodegradability and convenient administration to the periodontal pocket. In recent years, the focus of hydrogel research has shifted to smart stimuli-responsive hydrogels, which can undergo flexible sol-gel transitions in situ and control drug release in response to stimulation by temperature, light, pH, ROS, glucose, or enzymes. In this review, we systematically introduce the development and rational design of emerging smart stimuli-responsive hydrogels for periodontitis treatment. We also discuss the state-of-the-art therapeutic strategies of smart hydrogels based on the pathogenesis of periodontitis. Additionally, the challenges and future research directions of smart hydrogels for periodontitis treatment are discussed from the perspective of developing efficient hydrogel delivery systems and potential clinical applications.

Rheological and low field NMR characterization of hydrophobically-modified PEG hydrogels for drug delivery

The focus of this work is on the characterization of hydrophobically-modified polyethylene glycol hydrogels, to be used as drug delivery systems, by means of the combined used of rheology and low field Nuclear Magnetic Resonance. Indeed, these two techniques allowed understanding how the transient physical bonds deriving from hydrophobic association superimpose to the pre-existing covalent bonds. We found that the improvement of physical bonds can be achieved not only by increasing the content of hydrophobic segments but also by using thermal treatments after hydrogel preparation. Moreover, we proved the reliability of an overall interpretative model linking the dependence of the shear modulus and the average magnetic relaxation time. Finally, we proposed a new mathematical approach for the determination of the magnetic relaxation spectrum. This approach reduced the computational heaviness of the procedure and allowed to easily discern the different contributes nested in the overall magnetic relaxation spectrum, an aspect that the traditional approach cannot provide directly.

Advanced Hydrogel systems for mandibular reconstruction

Mandibular defect becomes a prevalent maxillofacial disease resulting in mandibular dysfunctions and huge psychological burdens to the patients. Considering the routine presence of oral contaminations and aesthetic restoration of facial structures, the current clinical treatments are however limited, incapable to reconstruct the structural integrity and regeneration, spurring the need for cost-effective mandibular tissue engineering. Hydrogel systems possess great merit for mandibular reconstruction with precise involvement of cells and bioactive factors. In this review, current clinical treatments and distinct mode(s) of mandible formation and pathological resorption are summarized, followed by a review of hydrogel-related mandibular tissue engineering, and an update on the advanced fabrication of hydrogels with improved mechanical property, antibacterial ability, injectable form, and 3D bioprinted hydrogel constructs. The exploration of advanced hydrogel systems will lay down a solid foundation for a bright future with more biocompatible, effective, and personalized treatment in mandibular reconstruction.

Thermosensitive Biodegradable Hydrogels for Local and Controlled Cerebral Delivery of Proteins: MRI-Based Monitoring of In Vitro and In Vivo Protein Release

Hydrogels have been suggested as novel drug delivery systems for sustained release of therapeutic proteins in various neurological disorders. The main advantage these systems offer is the controlled, prolonged exposure to a therapeutically effective dose of the released drug after a single intracerebral injection. Characterization of controlled release of therapeutics from a hydrogel is generally performed in vitro, as current methods do not allow for in vivo measurements of spatiotemporal distribution and release kinetics of a loaded protein. Importantly, the in vivo environment introduces many additional variables and factors that cannot be effectively simulated under in vitro conditions. To address this, in the present contribution, we developed a noninvasive in vivo magnetic resonance imaging (MRI) method to monitor local protein release from two injected hydrogels of the same chemical composition but different initial water contents. We designed a biodegradable hydrogel formulation composed of low and high concentration thermosensitive polymer and thiolated hyaluronic acid, which is liquid at room temperature and forms a gel due to a combination of physical and chemical cross-linking upon injection at 37 °C. The in vivo protein release kinetics from these gels were assessed by MRI analysis utilizing a model protein labeled with an MR contrast agent, i.e. gadolinium-labeled albumin (74 kDa). As proof of principle, the release kinetics of the hydrogels were first measured with MRI in vitro. Subsequently, the protein loaded hydrogels were administered in male Wistar rat brains and the release in vivo was monitored for 21 days. In vitro, the thermosensitive hydrogels with an initial water content of 81 and 66% released 64 ± 3% and 43 ± 3% of the protein loading, respectively, during the first 6 days at 37 °C. These differences were even more profound in vivo, where the thermosensitive hydrogels released 83 ± 16% and 57 ± 15% of the protein load, respectively, 1 week postinjection. Measurement of volume changes of the gels over time showed that the thermosensitive gel with the higher polymer concentration increased more than 4-fold in size in vivo after 3 weeks, which was substantially different from the in vitro behavior where a volume change of 35% was observed. Our study demonstrates the potential of MRI to noninvasively monitor in vivo intracerebral protein release from a locally administered in situ forming hydrogel, which could aid in the development and optimization of such drug delivery systems for brain disorders.

Advances in Stimuli-responsive Hydrogels for Tissue Engineering and Regenerative Medicine Applications: A Review Towards Improving Structural Design for 3D Printing

The physicochemical properties of polymeric hydrogels render them attractive for the development of 3D printed prototypes for tissue engineering in regenerative medicine. Significant effort has been made to design hydrogels with desirable attributes that facilitate 3D printability. In addition, there is significant interest in exploring stimuli-responsive hydrogels to support automated 3D printing into more structurally organised prototypes such as customizable bio-scaffolds for regenerative medicine applications. Synthesizing stimuli-responsive hydrogels is dependent on the type of design and modulation of various polymeric materials to open novel opportunities for applications in biomedicine and bio-engineering. In this review, the salient advances made in the design of stimuli-responsive polymeric hydrogels for 3D printing in tissue engineering are discussed with a specific focus on the different methods of manipulation to develop 3D printed stimuli-responsive polymeric hydrogels. Polymeric functionalisation, nano-enabling and crosslinking are amongst the most common manipulative attributes that affect the assembly and structure of 3D printed bio-scaffolds and their stimuli- responsiveness. The review also provides a concise incursion into the various applications of stimuli to enhance the automated production of structurally organized 3D printed medical prototypes.

Role of thermal and reactive oxygen species-responsive synthetic hydrogels in localized cancer treatment (bibliometric analysis and review)

Cancer is a major pharmaceutical challenge that necessitates improved care.

Self-Assembling Injectable Hydrogel for Controlled Drug Delivery of Antimuscular Atrophy Drug Tilorone

A two-component injectable hydrogel was suitably prepared for the encapsulation and prolonged release of tilorone which is an antimuscular atrophy drug. The rapid (7-45 s, depending on the polymer concentration) in situ solidifications of the hydrogel were evoked by the evolving Schiff-base bonds between the aldehyde groups of modified PVA (4-formyl benzoate PVA, PVA-CHO, 5.9 mol% functionalization degree) and the amino groups of 3-mercaptopropionate chitosan (CHIT-SH). The successful modification of the initial polymers was confirmed by both FTIR and NMR measurements; moreover, a new peak appeared in the FTIR spectrum of the 10% w/v PVA-CHO/CHIT-SH hydrogel at 1647 cm-1, indicating the formation of a Schiff base (-CH=N-) and confirming the interaction between the NH2 groups of CHIT-SH and the CHO groups of PVA-CHO for the formation of the dynamic hydrogel. The reaction between the NH2 and CHO groups of the modified biopolymers resulted in a significant increase in the hydrogel's viscosity which was more than one thousand times greater (9800 mPa·s) than that of the used polymer solutions, which have a viscosity of only 4.6 and 5.8 mPa·s, respectively. Furthermore, the initial chitosan was modified with mercaptopropionic acid (thiol content = 201.85 ± 12 µmol/g) to increase the mucoadhesive properties of the hydrogel. The thiolated chitosan showed a significant increase (~600 mN/mm) in adhesion to the pig intestinal membrane compared to the initial one (~300 mN/mm). The in vitro release of tilorone from the hydrogel was controlled with the crosslinking density/concentration of the hydrogel; the 10% w/v PVA-CHO/CHIT-SH hydrogel had the slowest releasing (21.7 h-1/2) rate, while the 2% w/v PVA-CHO/CHIT-SH hydrogel had the fastest releasing rate (34.6 h-1/2). Due to the characteristics of these hydrogels, their future uses include tissue regeneration scaffolds, wound dressings for skin injuries, and injectable or in situ forming drug delivery systems. Eventually, we hope that the developed hydrogel will be useful in the local treatment of muscle atrophy, such as laryngotracheal atrophy.

Controllable Construction of Temperature-Sensitive Supramolecular Hydrogel Based on Cellulose and Cyclodextrin

In temperature sensitive hydrogels, the swelling degree or light transmittance of the gel itself changes with variations in ambient temperature, prompting its wide application in controlled drug release, tissue engineering, and material separation. Considering the amphiphilic structure of β-cyclodextrin (β-CD), a cellulose-based supramolecular hydrogel with superior temperature sensitivity was synthesized based on a combination of cellulose and β-CD as well as the host–guest interaction between β-CD and polypropylene glycol (PPG). In the one-pot tandem reaction process, chemical grafting of β-CD on cellulose and the inclusion complexation of β-CD with PPG were performed simultaneously in a NaOH/urea/water system. The obtained supramolecular hydrogel had a lower critical solution temperature (LCST) of 34 °C. There existed covalent bonding between the cellulose and β-CD, host–guest complexation between the β-CD and PPG, and hydrogen bonding and hydrophobic interactions between the components in the network structure of the supramolecular hydrogel. The combination of various covalent and non-covalent bonds endowed the resulting supramolecular hydrogel with good internal network structure stability and thermal stability, as well as sensitive temperature responsiveness within a certain range—implying its potential as a smart material in the fields of medicine, biology, and textiles. This work is expected to bring new strategies for the fabrication of cellulose-based thermosensitive materials, benefitting the high-value utilization of cellulose.

Poly(N-isopropylacrylamide)-Based Hydrogels for Biomedical Applications: A Review of the State-of-the-Art

A prominent research topic in contemporary advanced functional materials science is the production of smart materials based on polymers that may independently adjust their physical and/or chemical characteristics when subjected to external stimuli. Smart hydrogels based on poly(N-isopropylacrylamide) (PNIPAM) demonstrate distinct thermoresponsive features close to a lower critical solution temperature (LCST) that enhance their capability in various biomedical applications such as drug delivery, tissue engineering, and wound dressings. Nevertheless, they have intrinsic shortcomings such as poor mechanical properties, limited loading capacity of actives, and poor biodegradability. Formulation of PNIPAM with diverse functional constituents to develop hydrogel composites is an efficient scheme to overcome these defects, which can significantly help for practicable application. This review reports on the latest developments in functional PNIPAM-based smart hydrogels for various biomedical applications. The first section describes the properties of PNIPAM-based hydrogels, followed by potential applications in diverse fields. Ultimately, this review summarizes the challenges and opportunities in this emerging area of research and development concerning this fascinating polymer-based system deep-rooted in chemistry and material science.

Sodium alginate/N-(Vinylcaprolactam) based supramolecular self-assembled subcutaneously administered in situ formed gels depot of 5-fluorouracil: Rheological analysis, in vitro cytotoxic potential, in vivo bioavailability and safety evaluation

In current study, novel in situ formed injectable self-assembled thermoreversible depot gels based on N-(Vinylcaprolactam) were synthesized with a carbohydrate polymer i.e. sodium alginate in aqueous solution using cold method. The prepared gels preparations were intended to be utilized as 5-FU delivery depot after injectable administration through subcutaneous route. The structural characterization of self-assembled gels samples were studied through FTIR. The thermal properties of newly formed gels complexes were investigated by DSC and TGA. While the morphology of gels were assessed through SEM. The tunable gelation temperatures and phase transition of optimized formulations were confirmed by tube inverting, rheology determination and optical transmittance test. Thermo and pH response was evaluated at different temperatures and in various acidic and basic buffer solutions. In vitro release experiments were conducted using Franz diffusion system to monitor the controlled delivery fashion of gels matrices. Results concluded that depot gels exhibit controlled delivery fashion with maximum release at pH 7.4 and 37 ± 2 °C. The biocompatible nature of blank gels samples was assessed by MTT assay against Vero cell lines and was found safe. While killing ability of 5-FU encapsulated gels was evaluated against HeLa (19 ± 0.22 μg/ml; 23 ± 0.55 μg/ml) and MCF-7 (21 ± 0.06 μg/ml and 22 ± 0.34 μg/ml) cancer cell lines and were found effective to kill cancer cells. Histopathological study showed that gels depot is safe with no harmful effects on major organs. The in vivo bioavailability in rabbits showed controlled release (Cmax, 4465.78 ± 1.99 ng/ml) in comparison to free drug (Cmax, 4883.73 ± 3.32 ng/ml) administration after subcutaneous injection.

Preparation of a novel tacrolimus ion sensitive ocular in situ gel and in vivo evaluation of curative effect of immune conjunctivitis

BACKGROUND

The aim of this study was to formulate a novel TAC preparation into an in situ gel for ocular drug delivery, in order to prolong the residence time on mucosal surfaces and increase patient compliance.

METHODS

The optimal formulation was characterized by surface morphology, gelling capacity, viscosity, stability and in vitro release. In vivo studies were also conducted to evaluate the precorneal retention and pharmacodynamic results.

RESULTS

In this study, the TAC in situ gel can be prepared by a simple solvent stirring method, and the optimized formulation exhibited good stability within 3 months. During storage, the initial viscosity of the formula had little change. The results of viscosity measurement showed that TAC in situ gel was typical of pseudo plastic systems and exhibited a marked increase in viscosity stimulated with STF. In vitro and in vivo studies illustrated that TAC in situ gel administration facilitated the retention and sustained release of TAC.

CONCLUSIONS

TAC combined with in situ gelling agents demonstrates an efficient topical drug delivery platform.

Design of hydrogel-microgel composites with tailored small molecule release profiles

Stimuli-responsive hydrogel-microgel composites (HMC) were prepared by embedding poly(N-isopropylacrylamide)-based microgels in a poly(N-isopropylacrylamide)-based hydrogel. When the microgels were pre-loaded with the small molecule model drug crystal violet (CV) via electrostatics, the HMC was able to release the CV in a pH-triggered fashion. We found that the CV release rate was dependent on the solution temperature and the dimension of the material. Also, by changing the chemical composition and/or pore size of the hydrogel matrix, the CV release kinetics can be tuned. Moreover, when multiple microgels loaded with different model drugs were embedded in a single HMC, the HMC can be used to control the release rate of each drug analog individually in a pH-dependent fashion. By understanding how properties of a hydrogel can alter the release of small molecules from embedded microgels, new materials capable of controlled and triggered release of multiple small molecule drugs can be designed with myriad uses in the biomedical field.

Development of a multifunctional injectable temperature-sensitive gelatin-based adhesive double-network hydrogel

Gelatin-based bioadhesives are suitable for the treatment of wounds due to their inherent biocompatibility, lack of immunogenicity, and potential for modification. However, common limitations with such adhesives include their adhesive strength and versatility. In the present study, a multifunctional injectable temperature-sensitive gelatin-based adhesive double-network hydrogel (DNGel) was engineered using facile dual-syringe methodology. An integrative crosslinking strategy utilized the complexation of catechol-Fe³⁺ and NIPAAm-methacryloyl. As anticipated, the DNGel exhibited multifunctional therapeutic properties, namely temperature-sensitivity, mechanical flexibility, good adhesive strength, injectability, self-healing capability, antibacterial activity, and the capability to enable hemostasis and wound healing. The bioinspired dynamic double-network was stabilized by a number of molecular interactions between components in the DNGel, providing multifunctional therapeutic performance. In addition, comprehensive in vitro and in vivo testing confirmed that the adhesive hydrogel exhibited effective antihemorrhagic properties and accelerated wound healing by the promotion of revascularization, representing considerable potential as a next-generation multifunctional smart adhesive patch.

Chondroinductive/chondroconductive peptides and their-functionalized biomaterials for cartilage tissue engineering

The repair of articular cartilage defects is still challenging in the fields of orthopedics and maxillofacial surgery due to the avascular structure of articular cartilage and the limited regenerative capacity of mature chondrocytes. To provide viable treatment options, tremendous efforts have been made to develop various chondrogenically-functionalized biomaterials for cartilage tissue engineering. Peptides that are derived from and mimic the functions of chondroconductive cartilage extracellular matrix and chondroinductive growth factors, represent a unique group of bioactive agents for chondrogenic functionalization. Since they can be chemically synthesized, peptides bear better reproducibility, more stable efficacy, higher modifiability and yielding efficiency in comparison with naturally derived biomaterials and recombinant growth factors. In this review, we summarize the current knowledge in the designs of the chondroinductive/chondroconductive peptides, the underlying molecular mechanisms and their-functionalized biomaterials for cartilage tissue engineering. We also systematically compare their in-vitro and in-vivo efficacies in inducing chondrogenesis. Our vision is to stimulate the development of novel peptides and their-functionalized biomaterials for cartilage tissue engineering.

Thermosensitive Chitosan-Containing Hydrogels: Their Formation, Properties, Antibacterial Activity, and Veterinary Usage

Mixtures of aqueous solutions of chitosan hydrochloride (CS·HCl, 1–4 wt.%) and Pluronic F-127 (Pl F-127, 25 wt.%) were studied using vibrational and rotational viscometry; the optimal aminopolysaccharide concentration (3 wt.%) and the CS·HCl:Pl F-127 ratio (30:70) to obtain a thermosensitive hydrogel were found. It was shown that at 4 °C, such mixed compositions were viscous liquids, while at 37 °C for 1–2 min, they undergo a thermally reversible transition to a shape-stable hydrogel with a developed level of structure formation, satisfactory viscosity and high mucoadhesive parameters (maximum pull-off force F_max = 1.5 kN/m²; work of adhesion W = 66.6 × 10⁻³ J). Adding D-ascorbic acid to the hydrogel led to orientational ordering of the supramolecular structure of the mixed system and significantly improved mucoadhesion (F_max = 4.1 kN/m², W = 145.1 × 10⁻³ J). A microbiological study revealed the high antibacterial activity of the hydrogel against Gram-negative and Gram-positive bacterial strains. The treatment of mixed bacterial infection in cows demonstrated the possibility of the in situ formation of a viscoelastic gel and revealed its high therapeutic effect. It has been suggested that our thermosensitive mucoadhesive CS·HCl:Pl F-127 hydrogels could be considered as independent veterinary drugs and pharmaceuticals.

Emerging biomaterial-based strategies for personalized therapeutic in situ cancer vaccines

Landmark successes in oncoimmunology have led to development of therapeutics boosting the host immune system to eradicate local and distant tumors with impactful tumor reduction in a subset of patients. However, current immunotherapy modalities often demonstrate limited success when involving immunologically cold tumors and solid tumors. Here, we describe the role of various biomaterials to formulate cancer vaccines as a form of cancer immunotherapy, seeking to utilize the host immune system to activate and expand tumor-specific T cells. Biomaterial-based cancer vaccines enhance the cancer-immunity cycle by harnessing cellular recruitment and activation against tumor-specific antigens. In this review, we discuss biomaterial-based vaccine strategies to induce lymphocytic responses necessary to mediate anti-tumor immunity. We focus on strategies that selectively attract dendritic cells via immunostimulatory gradients, activate them against presented tumor-specific antigens, and induce effective cross-presentation to T cells in secondary lymphoid organs, thereby generating immunity. We posit that personalized cancer vaccines are promising targets to generate long-term systemic immunity against patient- and tumor-specific antigens to ensure long-term cancer remission.

In Situ Hydrogels for Effective Treatment of Cancer: Strategies and Polymers Used

Cancer is a worldwide health ailment with no known boundaries in terms of mortality and occurrence rates, thus is one of the biggest threats to humankind. Hence, there is an absolute need to develop novel therapeutics to bridge the infirmities associated with chemotherapy and conventional surgical methodologies, including impairment of normal tissue, compromised drug efficiency and an escalation in side effects. In lieu of this, there has been a surge in curiosity towards the development of injectable hydrogels for cancer therapy because local administration of the active pharmaceutical agent offers encouraging advantages such as providing a higher effective dose at the target site, a prolonged retention time of drug, ease of administration, mitigation of dose in vivo, and improved patient compliance. Furthermore, due to their biocompatible nature, such systems can significantly reduce the side effects that occur on long-term exposure to chemotherapy. The present review details the most recent advancements in the in-situ gel forming polymers (natural and synthetic), polymeric cross-linking methodologies and in-situ gelling mechanisms, focusing on their clinical benefits in cancer therapy.

Novel fusion peptides deliver exosomes to modify injectable thermo-sensitive hydrogels for bone regeneration

Injectable thermo-sensitive hydrogels composed of small intestinal submucosa (SIS) with exosomes derived from bone marrow mesenchymal stem cells (BMSCs) are desired for bone regeneration. However, poor mechanical properties limit the clinical application of SIS hydrogels. Herein, the mechanical properties of SIS hydrogels incorporated with 3-(3,4-dihydroxyphenyl) propionic acid (CA) are assessed. The results show that the mechanical properties of SIS hydrogels are improved. In addition, the retention and stability of exosomes over time at the defect site are also challenges. Fusion peptides are designed by connecting collagen-binding domines (CBDs) of collagen type I/III with exosomal capture peptides CP05 (CRHSQMTVTSRL) directly or via rigid linkers (EAAAK). In vitro experiments demonstrate that fusion peptides are contribute to promoting the positive effect of exosomes on osteogenic differentiation of BMSCs. Meanwhile, the results of hydrogels combining exosomes and fusion peptides in the treatment of rat skull defect models reveal that fusion peptides could enhance the retention and stability of exosomes, thereby strengthen the therapeutic effect for skull defects. Therefore, SIS hydrogels with CA modified by fusion peptides and exosomes appear to be a promising strategy in bone regenerative medicine.

Temperature and pH-responsive in situ hydrogels of gelatin derivatives to prevent the reoccurrence of brain tumor

Glioblastoma multiforme (GBM) is a grade IV malignant brain tumor with a median survival time of approximately 12-16 months. Because of its highly aggressive and heterogeneous nature it is very difficult to remove by surgical resection. Herein we have reported dual stimuli-responsive and biodegradable in situ hydrogels of oligosulfamethazine-grafted gelatin and loaded with anticancer drug paclitaxel (PTX) for preventing the progress of Glioblastoma. The oligosulfamethazine (OSM) introduced to the gelatin backbone for the formation of definite and stable in situ hydrogel. The hydrogels transformed from a sol to a gel state upon changes in stimuli. pH and temperature and retained a distinct shape after subcutaneous administration in BALB/c mice. The viscosity of the sol state hydrogels was tuned by varying the feed molar ratio between gelatin and OSM. The porosity of the hydrogels was confirmed to be lower in higher degree OSM by SEM. Sustained release of PTX from hydrogels in physiological environments (pH 7.4) was further retarded up to 63% in 9th days in tumor environments (pH 6.5). While the empty hydrogels were non-toxic in cultured cells, the hydrogels loaded with PTX showed antitumor efficacy in orthotopic-GBM xenograft mice. Collectively, the gelatin-OSM formed porous hydrogels and released the cargo in a sustained manner in tumor environments efficiently suppressing the progress of GBM. Thus, gelatin-OSM hydrogels are a potential candidate for the direct delivery of therapeutics to the local areas in brain diseases.

Formulation, optimization, and nephrotoxicity evaluation of an antifungal in situ nasal gel loaded with voriconazole‒clove oil transferosomal nanoparticles

Fungal infections of the paranasal cavity are among the most widely spread illnesses nowadays. The aim of the current study was to estimate the effectiveness of an in situ gel loaded with voriconazole‒clove oil nano-transferosomes (VRC-CO-NT) in enhancing the activity of voriconazole against Aspergillus flavus, which causes rhinosinusitis. The nephrotoxic side effects of voriconazole may be reduced through the incorporation of the clove oil, which has antioxidant activity that protects tissue. The Box‒Behnken design was applied to formulate the VRC-CO-NT. The particle size, entrapment efficiency, antifungal inhibition zone, and serum creatinine concentration were considered dependent variables, and the soybean lecithin, VRC, and CO concentrations were considered independent ones. The final optimized formulation was loaded into a deacetylated gellan gum base and evaluated for its gelation, rheological properties, drug release profile, permeation capabilities, and in vivo nephrotoxicity. The optimum formulation was determined to be composed of 50 mg/mL lecithin, 18 mg/mL VRC, and 75 mg/mL CO, with a minimum particle size of 102.96 nm, an entrapment efficiency of 71.70%, an inhibition zone of 21.76 mm, and a serum creatinine level of 0.119 mmol/L. The optimized loaded in situ gel released 82.5% VRC after 12 hours and resulted in a 5.4-fold increase in drug permeation. The in vivo results obtained using rabbits resulted in a nonsignificant differentiation among the renal function parameters compared with the negative control group. In conclusion, nasal in situ gel loaded with VRC-CO-NT is considered an efficient novel carrier with enhanced antifungal properties with no signs of nephrotoxicity.

Development, characterization and in vitro-in vivo evaluation of Farnesol loaded niosomal gel for applications in oral candidiasis treatment

Objectives

The aim of the study was to formulate and characterize the farnesol loaded niosomes comprising gel formulation and perform their in vitro–in vivo evaluation for applications in the treatment of oral candidiasis infections.

Methods

Various gelling systems were evaluated for their rheological and stability properties. The formulation was statistically optimized using experimental design method (Box-Behnken). Transmission electron microscopy (TEM) and Atomic force microscopy (AFM) were used to observe the niosomal surface morphology. Centrifugation method and dialysis method were used to find out the % entrapment efficiency (%EE) and in-vitro release of Farnesol, respectively. In-vitro antifungal effect and cell biocompatibility of the Farnesol loaded niosomal gel was also performed using Candida albicans (C. albicans) as the model organism and epithelial cell line (SW480) by MTT cytotoxicity assay. In-vivo skin irritation test was performed on rabbit skin.

Key findings

Farnesol loaded niosomes were integrated into polymeric gel solution. The optimized formulation demonstrated acceptable % EE (>80%) and an optimum particle size (168.8 nm) along with a sustained release and a long-term storage stability for up to a period of 6 months. TEM and AFM observations displayed a spherical niosome morphology. Farnesol niosomal gel showed a higher antifungal efficacy, ex-vivo skin permeation and deposition in comparison to plain farnesol solution. The niosomal gel also showed negligible cytotoxicity to normal cells citing biocompatibility and was found to be non-toxic and non-irritant to rabbit skin.

Conclusions

This novel niosome loaded gel-based formulation could make the oral candidiasis healing process more efficient while improving patient compliance. With the optimized methodology used in this work, such formulation approaches can become an efficient, industrially scalable, and cost-effective alternatives to the existing conventional formulations.

Translational Applications of Hydrogels

Advances in hydrogel technology have unlocked unique and valuable capabilities that are being applied to a diverse set of translational applications. Hydrogels perform functions relevant to a range of biomedical purposes-they can deliver drugs or cells, regenerate hard and soft tissues, adhere to wet tissues, prevent bleeding, provide contrast during imaging, protect tissues or organs during radiotherapy, and improve the biocompatibility of medical implants. These capabilities make hydrogels useful for many distinct and pressing diseases and medical conditions and even for less conventional areas such as environmental engineering. In this review, we cover the major capabilities of hydrogels, with a focus on the novel benefits of injectable hydrogels, and how they relate to translational applications in medicine and the environment. We pay close attention to how the development of contemporary hydrogels requires extensive interdisciplinary collaboration to accomplish highly specific and complex biological tasks that range from cancer immunotherapy to tissue engineering to vaccination. We complement our discussion of preclinical and clinical development of hydrogels with mechanical design considerations needed for scaling injectable hydrogel technologies for clinical application. We anticipate that readers will gain a more complete picture of the expansive possibilities for hydrogels to make practical and impactful differences across numerous fields and biomedical applications.

A review of hydrogel systems based on poly(N-isopropyl acrylamide) for use in the engineering of bone tissues

Bone fracture is usually a medical condition where occurred by high force impact or stress. Recent advances to repair damaged or diseased bone tissues employs three-dimensional (3D) polymer matrices. This review aims to investigate the potential of injectable, dual thermally, and chemically gelable N-isopropyl acrylamide-based hydrogels to deliver scaffold, cells, and growth factors in vitro and in vivo.

On-demand retrieval of cells three-dimensionally seeded in injectable thioester-based hydrogels

Scaffold systems that can easily encapsulate cells and safely retrieve them at the desired time are important for the advancement of cell-based medicine. In this study, we designed and fabricated thioester-based poly(ethylene glycol) (PEG) hydrogels with injectability and on-demand degradability as new scaffold materials for cells. Hydrogels can be formed in situ within minutes via thioester cross-linking between PEG molecules and can be degraded under mild conditions in response to l-cysteine molecules through thiol exchange occurring at the thioester linkage. Various cell experiments, especially with sucrose, which enables the adjustment of the osmotic pressure around the cells, showed that the damage to the cells during encapsulation and degradation was minimal, indicating the capability of on-demand retrieval of intact cells. This hydrogel system is a versatile tool in the field of cell-based research and applications such as tissue regeneration and regenerative medicine.

Human mesenchymal stem/stromal cells can be three-dimensionally encapsulated in hydrogels cross-linked with thioester linkages. Degrading the cell-embedded hydrogels by l-cysteine molecules enables safe on-demand retrieval of the cells.

Polymer-free hydrogel made of lipid nanocapsules, as a local drug delivery platform

Nanoparticle-loaded hydrogels are attractive pharmaceutical drug delivery systems that combine the advantages of both hydrogel (local administration and/or sustained drug release) and nanoparticle (stealthiness, targeting and decreased toxicity). The design of nanoparticle-loaded hydrogels is largely conventional, consisting of the dispersion of nanoparticles in a natural or synthetic polymer matrix to form a gel network. Novel nanoparticle-loaded hydrogels architecture could provide advantages in terms of innovation and application. We focused on the development of lipid nanocapsule (LNC)-based hydrogels without the use of a polymer matrix as a platform for drug delivery. Cytidine was modified by grafting palmitoyl chains (CytC16) and the new entity was added during the LNC phase-inversion formulation process allowing spontaneous gelation. Positioned at the oil/water interface, CytC16 acts as a crosslinking agent between LNCs. Association of the LNCs in a three-dimensional network led to the formation of polymer-free hydrogels. The viscoelastic properties of the LNC-based hydrogels depended on the LNC concentration and CytC16 loading but were not affected by the LNC size distribution. The LNC and drug-release profiles were controlled by the mechanical properties of the LNC-based hydrogels (slower release profiles correlated with higher viscoelasticity). Finally, the subcutaneous administration of LNC-based hydrogels led to classic inflammatory reactions of the foreign body-reaction type due to the endogenous character of CytC16, shown by cellular viability assays. New-generation nanoparticle-loaded hydrogels (LNC-based polymer-free hydrogels) show promise as implants for pharmaceutical applications. Once LNC release is completed, no gel matrix remains at the injection site, minimizing the additional toxicity due to the persistence of polymeric implants. Sustained drug-release profiles can be controlled by the mechanical properties of the hydrogels and could be tailor-made, depending on the therapeutic strategy chosen.