Interactions of Pluronic nanocarriers with 2D and 3D cell cultures: Effects of PEO block length and aggregation state

Nanocarrier systems loaded with IR780, iron oxide nanoparticles and chlorambucil for cancer theragnostics

Theragnostics has become a popular term nowadays, since it enables both diagnosis and therapy at the same time while only using one carrier platform. Therefore, formulating a nanocarrier system that could serve as theragnostic agent by using simple techniques would be an advantage during production. In this project, we aimed to develop a nanocarrier that can be loaded with the chemotherapeutic medication chlorambucil and magnetic resonance imaging agents (e.g., iron oxide nanoparticles and near-infrared fluorophore IR780) for theragnostics. Poly(lactic-co-glycolic acid) was combined with the aforementioned ingredients to generate poly(vinyl alcohol)-based nanoparticles (NPs) using the single emulsion technique. Then the NPs were coated with F127 and F127-folate by simple incubation for five days. The nanoparticles have the hydrodynamic size of approx. 250 nm with negative charge. Similar to chlorambucil and IR780, iron oxide loadings were observed for all three kinds of NPs. The release of chlorambucil was quicker at pH 5.4 than at pH 7.4 at 37 °C. The F127@NPs and F127-folate@NPs demonstrated much greater cell uptake and toxicity up to 72 h after incubation. Our in vitro results of F127@NPs and F127-folate@NPs have demonstrated the ability of these systems to serve as medication and imaging agent carriers for cancer treatment and diagnostics, respectively.

Application of Pluronics for Enhancing Aqueous Solubility of Lipophilic Microtubule Destabilizing Compounds on the Sea Urchin Embryo Model

In screening, the dilution of DMSO stock solution of a lipophilic molecule with an assay medium often causes compound precipitation. To overcome the issue, the application of Pluronics as cosolvents was examined using a phenotypic sea urchin embryo assay that allows for the quick and facile evaluation of the antiproliferative effect together with systemic toxicity. Maximum tolerated concentration values for Pluronics L121, P123, and F127 were 1.4 μM, 8.6 μM, and 39.7 μM, respectively, and correlated directly with their hydrophilicity. Pluronics L121 and P123 suppressed cleavage and blastomeres retained the round shape, unlike hydrophilic Pluronic F127, which induced fertilization envelope creasing and embryo deformation that could be associated with the interaction of hydrophilic PEO units with mucopolysaccharides at the surface of sea urchin embryos. The toxicity of P123, but not of L121 and F127, was temperature-dependent and markedly increased at lower temperatures. CMC values obtained at different temperatures confirmed that the toxic effect of P123 was associated with both unimers and micelles, whereas F127 toxicity was related mainly to micelles. Evaluation using phenotypic sea urchin embryo assay revealed that potent microtubule destabilizers, namely albendazole, diarylisoxazole, and two chalcones, retained antimitotic activity after the dilution of their DMSO or 2-pyrrolidone stock solutions with 1.25% w/v Pluronic P123 or 5% w/v Pluronic F127. It was suggested that Pluronic P123 and Pluronic F127 could be used as cosolvents to improve the solubility of lipophilic molecules in aqueous medium.

The in vivo fate of polymeric micelles

This review aims to provide a systemic analysis of the in vivo, as well as subcellular, fate of polymeric micelles (PMs), starting from the entry of PMs into the body. Few PMs are able to cross the biological barriers intact and reach the circulation. In the blood, PMs demonstrate fairly good stability mainly owing to formation of protein corona despite controversial results reported by different groups. Although the exterior hydrophilic shells render PMs "long-circulating", the biodistribution of PMs into the mononuclear phagocyte systems (MPS) is dominant as compared with non-MPS organs and tissues. Evidence emerges to support that the copolymer poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) is first broken down into pieces of PEG and PLA and then remnants to be eliminated from the body finally. At the cellular level, PMs tend to be internalized via endocytosis due to their particulate nature and disassembled and degraded within the cell. Recent findings on the effect of particle size, surface characteristics and shape are also reviewed. It is envisaged that unraveling the in vivo and subcellular fate sheds light on the performing mechanisms and gears up the clinical translation of PMs.

Kinetics of Nanomedicine in Tumor Spheroid as an In Vitro Model System for Efficient Tumor-Targeted Drug Delivery With Insights From Mathematical Models

Numerous strategies have been developed to treat cancer conventionally. Most importantly, chemotherapy shows its huge promise as a better treatment modality over others. Nonetheless, the very complex behavior of the tumor microenvironment frequently impedes successful drug delivery to the tumor sites that further demands very urgent and effective distribution mechanisms of anticancer drugs specifically to the tumor sites. Hence, targeted drug delivery to tumor sites has become a major challenge to the scientific community for cancer therapy by assuring drug effects to selective tumor tissue and overcoming undesired toxic side effects to the normal tissues. The application of nanotechnology to the drug delivery system pays heed to the design of nanomedicine for specific cell distribution. Aiming to limit the use of traditional strategies, the adequacy of drug-loaded nanocarriers (i.e., nanomedicine) proves worthwhile. After systemic blood circulation, a typical nanomedicine follows three levels of disposition to tumor cells in order to exhibit efficient pharmacological effects induced by the drug candidates residing within it. As a result, nanomedicine propounds the assurance towards the improved bioavailability of anticancer drug candidates, increased dose responses, and enhanced targeted efficiency towards delivery and distribution of effective therapeutic concentration, limiting toxic concentration. These aspects emanate the proficiency of drug delivery mechanisms. Understanding the potential tumor targeting barriers and limiting conditions for nanomedicine extravasation, tumor penetration, and final accumulation of the anticancer drug to tumor mass, experiments with in vivo animal models for nanomedicine screening are a key step before it reaches clinical translation. Although the study with animals is undoubtedly valuable, it has many associated ethical issues. Moreover, individual experiments are very expensive and take a longer time to conclude. To overcome these issues, nowadays, multicellular tumor spheroids are considered a promising in vitro model system that proposes better replication of in vivo tumor properties for the future development of new therapeutics. In this review, we will discuss how tumor spheroids could be used as an in vitro model system to screen nanomedicine used in targeted drug delivery, aiming for better therapeutic benefits. In addition, the recent proliferation of mathematical modeling approaches gives profound insight into the underlying physical principles and produces quantitative predictions. The hierarchical tumor structure is already well decorous to be treated mathematically. To study targeted drug delivery, mathematical modeling of tumor architecture, its growth, and the concentration gradient of oxygen are the points of prime focus. Not only are the quantitative models circumscribed to the spheroid, but also the role of modeling for the nanoparticle is equally inevitable. Abundant mathematical models have been set in motion for more elaborative and meticulous designing of nanomedicine, addressing the question regarding the objective of nanoparticle delivery to increase the concentration and the augmentative exposure of the therapeutic drug molecule to the core. Thus, to diffuse the dichotomy among the chemistry involved, biological data, and the underlying physics, the mathematical models play an indispensable role in assisting the experimentalist with further evaluation by providing the admissible quantitative approach that can be validated. This review will provide an overview of the targeted drug delivery mechanism for spheroid, using nanomedicine as an advantageous tool.

Polymeric Drug Delivery System Based on Pluronics for Cancer Treatment

Pluronic polymers (pluronics) are a unique class of synthetic triblock copolymers containing hydrophobic polypropylene oxide (PPO) and hydrophilic polyethylene oxide (PEO) arranged in the PEO-PPO-PEO manner. Due to their excellent biocompatibility and amphiphilic properties, pluronics are an ideal and promising biological material, which is widely used in drug delivery, disease diagnosis, and treatment, among other applications. Through self-assembly or in combination with other materials, pluronics can form nano carriers with different morphologies, representing a kind of multifunctional pharmaceutical excipients. In recent years, the utilization of pluronic-based multi-functional drug carriers in tumor treatment has become widespread, and various responsive drug carriers are designed according to the characteristics of the tumor microenvironment, resulting in major progress in tumor therapy. This review introduces the specific role of pluronic-based polymer drug delivery systems in tumor therapy, focusing on their physical and chemical properties as well as the design aspects of pluronic polymers. Finally, using newer literature reports, this review provides insights into the future potential and challenges posed by different pluronic-based polymer drug delivery systems in tumor therapy.

Delivery of Cinnamic Aldehyde Antioxidant Response Activating nanoParticles (ARAPas) for Vascular Applications

Selective delivery of nuclear factor erythroid 2-related factor 2 (Nrf2) activators to the injured vasculature at the time of vascular surgical intervention has the potential to attenuate oxidative stress and decrease vascular smooth muscle cell (VSMC) hyperproliferation and migration towards the inner vessel wall. To this end, we developed a nanoformulation of cinnamic aldehyde (CA), termed Antioxidant Response Activating nanoParticles (ARAPas), that can be readily loaded into macrophages ex vivo. The CA-ARAPas-macrophage system was used to study the effects of CA on VSMC in culture. CA was encapsulated into a pluronic micelle that was readily loaded into both murine and human macrophages. CA-ARAPas inhibits VSMC proliferation and migration, and activates Nrf2. Macrophage-mediated transfer of CA-ARAPas to VSMC is evident after 12 h, and Nrf2 activation is apparent after 24 h. This is the first report, to the best of our knowledge, of CA encapsulation in pluronic micelles for macrophage-mediated delivery studies. The results of this study highlight the feasibility of CA encapsulation and subsequent macrophage uptake for delivery of cargo into other pertinent cells, such as VSMC.

Exploration and insights into the cellular internalization and intracellular fate of amphiphilic polymeric nanocarriers

The beneficial or deleterious effects of nanomedicines emerge from their complex interactions with intracellular pathways and their subcellular fate. Moreover, the dynamic nature of plasma membrane accounts for the movement of these nanocarriers within the cell towards different organelles thereby not only influencing their pharmacokinetic and pharmacodynamic properties but also bioavailability, therapeutic efficacy and toxicity. Therefore, an in-depth understanding of underlying parameters controlling nanocarrier endocytosis and intracellular fate is essential. In order to direct nanoparticles towards specific sub-cellular organelles the physicochemical attributes of nanocarriers can be manipulated. These include particle size, shape and surface charge/chemistry. Restricting the particle size of nanocarriers below 200 nm contributes to internalization via clathrin and caveolae mediated pathways. Similarly, a moderate negative surface potential confers endolysosomal escape and targeting towards mitochondria, endoplasmic reticulum (ER) and Golgi. This review aims to provide an insight into these physicochemical attributes of nanocarriers fabricated using amphiphilic graft copolymers affecting cellular internalization. Fundamental principles understood from experimental studies have been extrapolated to draw a general conclusion for the designing of optimized nanoparticulate drug delivery systems and enhanced intracellular uptake via specific endocytic pathway.

Radiolabelling of nanomaterials for medical imaging and therapy

Nanomaterials offer unique physical, chemical and biological properties of interest for medical imaging and therapy. Over the last two decades, there has been an increasing effort to translate nanomaterial-based medicinal products (so-called nanomedicines) into clinical practice and, although multiple nanoparticle-based formulations are clinically available, there is still a disparity between the number of pre-clinical products and those that reach clinical approval. To facilitate the efficient clinical translation of nanomedicinal-drugs, it is important to study their whole-body biodistribution and pharmacokinetics from the early stages of their development. Integrating this knowledge with that of their therapeutic profile and/or toxicity should provide a powerful combination to efficiently inform nanomedicine trials and allow early selection of the most promising candidates. In this context, radiolabelling nanomaterials allows whole-body and non-invasive in vivo tracking by the sensitive clinical imaging techniques positron emission tomography (PET), and single photon emission computed tomography (SPECT). Furthermore, certain radionuclides with specific nuclear emissions can elicit therapeutic effects by themselves, leading to radionuclide-based therapy. To ensure robust information during the development of nanomaterials for PET/SPECT imaging and/or radionuclide therapy, selection of the most appropriate radiolabelling method and knowledge of its limitations are critical. Different radiolabelling strategies are available depending on the type of material, the radionuclide and/or the final application. In this review we describe the different radiolabelling strategies currently available, with a critical vision over their advantages and disadvantages. The final aim is to review the most relevant and up-to-date knowledge available in this field, and support the efficient clinical translation of future nanomedicinal products for in vivo imaging and/or therapy.

Real-Time Ratiometric Imaging of Micelles Assembly State in a Microfluidic Cancer-on-a-Chip

The performance of supramolecular nanocarriers as drug delivery systems depends on their stability in the complex and dynamic biological media. After administration, nanocarriers are challenged by physiological barriers such as shear stress and proteins present in blood, endothelial wall, extracellular matrix, and eventually cancer cell membrane. While early disassembly will result in a premature drug release, extreme stability of the nanocarriers can lead to poor drug release and low efficiency. Therefore, comprehensive understanding of the stability and assembly state of supramolecular carriers in each stage of delivery is the key factor for the rational design of these systems. One of the main challenges is that current 2D in vitro models do not provide exhaustive information, as they fail to recapitulate the 3D tumor microenvironment. This deficiency in the 2D model complexity is the main reason for the differences observed in vivo when testing the performance of supramolecular nanocarriers. Herein, we present a real-time monitoring study of self-assembled micelles stability and extravasation, combining spectral confocal microscopy and a microfluidic cancer-on-a-chip. The combination of advanced imaging and a reliable 3D model allows tracking of micelle disassembly by following the spectral properties of the amphiphiles in space and time during the crucial steps of drug delivery. The spectrally active micelles were introduced under flow and their position and conformation continuously followed by spectral imaging during the crossing of barriers, revealing the interplay between carrier structure, micellar stability, and extravasation. Integrating the ability of the micelles to change their fluorescent properties when disassembled, spectral confocal imaging and 3D microfluidic tumor blood vessel-on-a-chip resulted in the establishment of a robust testing platform suitable for real-time imaging and evaluation of supramolecular drug delivery carrier's stability.

Hybrid micelles based on Pt (IV) polymeric prodrug and TPGS for the enhanced cytotoxicity in drug-resistant lung cancer cells

Multidrug resistance (MDR) is a primary cause of failure in oncotherapy and interest is growing in the design of multi-stimuli responsive nano-carriers to synergistically deliver chemotherapeutic agents and P-gp inhibitors to reverse MDR. The hybrid micelles based on a Platinum (IV)-coordinate polymeric prodrugs and TPGS were developed to improve chemotherapy and reduce side effects. The pH/redox dual-sensitive polymers were synthesized by condensation polymerization using ortho ester monomer and diamminedichlorodisuccinatoplatinum (DSP). The hybrid micelles possessed uniform size (38 nm) and displayed good stability in various physiological conditions. In contrast, in vitro drug release profiles indicated that these micelles could be completely depolymerized under acidic and reducing environment, thereby more than 80 % cisplatin were released within 12 h at pH 5.0 plus 10 mM DTT. More importantly, a large amount of TPGS released simultaneously could effectively inhibit the function of drug efflux pumps, which significantly enhanced the cytotoxicity of cisplatin against A549/DDP cells. The growth inhibition rate of micelles on A549/DDP multicellular spheroids was 79.5 %, while that of free cisplatin was only 6.8 %. Therefore, these hybrid micelles are promising in overcoming tumor MDR and worth doing further research in vivo and extend to other therapeutic agents.

Endocytosis: The Nanoparticle and Submicron Nanocompounds Gateway into the Cell

Nanoparticles (NPs) and submicron particles are increasingly used as carriers for delivering therapeutic compounds to cells. Their entry into the cell represents the initial step in this delivery process, being most of the nanoparticles taken up by endocytosis, although other mechanisms can contribute to the uptake. To increase the delivery efficiency of therapeutic compounds by NPs and submicron particles is very relevant to understand the mechanisms involved in the uptake process. This review covers the proposed pathways involved in the cellular uptake of different NPs and submicron particles types as well as the role that some of the physicochemical nanoparticle characteristics play in the uptake pathway preferentially used by the nanoparticles to gain access and deliver their cargo inside the cell.

Colloidal stability of graphene oxide nanosheets in association with triblock copolymers: A neutron scattering analysis

This study investigates stabilization of graphene oxide (GO) nanosheets in polyethylene oxide-polypropylene oxide (PEO-PPO) block copolymers (P103, P123 and F127). Changes in micellization of copolymers upon GO addition were monitored using dynamic light (DLS) and small angle neutron scattering (SANS). Structural developments at sheet surface were studied with two possibilities; (i) adsorption of PPO block over hydrophobic basal plane allowing the engagement of hydrophilic PEO with aqueous bulk, and (ii) adsorption of micelles mediated via carboxylated groups. Insignificant changes in micellar parameters for P123 and P127 were indicative of their inferior interaction with GO. On the other hand, P103 micelles exhibited high affinity for sheets, noticeable as emergence of mass fractals and more than two-fold enhancement in micelle number density. The latter allowed coverage of entire surface with P103 micelles. Existence of mass fractals was verified by extracting the form and structure factors from the fitted SANS data. Spectroscopic and thermogravimetric analyses illustrated non-covalent adsorption of copolymer aggregates. It was interesting to note that the dispersion remained stable against protein and electrolyte addition. A comprehensive understanding on colloidal stability can be valuable for drug delivery applications of GO sheets.

3D cultures for modeling nanomaterial-based photothermal therapy

Photothermal therapy (PTT) is one of the most promising techniques for cancer tumor ablation. Nanoparticles are increasingly being investigated for use with PTT and can serve as theranostic agents. Based on the ability of near-infrared nano-photo-absorbers to generate heat under laser irradiation, PTT could prove advantageous in certain situations over more classical cancer therapies. To analyze the efficacy of nanoparticle-based PTT, preclinical in vitro studies typically use 2D cultures, but this method cannot completely mimic the complex tumor organization, bioactivity, and physiology that all control the complex penetration depth, biodistribution, and tissue diffusion parameters of nanomaterials in vivo. To fill this knowledge gap, 3D culture systems have been explored for PTT analysis. These models provide more realistic microenvironments that allow spatiotemporal oxygen gradients and cancer cell adaptations to be considered. This review highlights the work that has been done to advance 3D models for cancer microenvironment modeling, specifically in the context of advanced, functionalized nanoparticle-directed PTT.

Pharmaceutical excipient salts effect on micellization and drug solubilization of PEO-PPO-ph-PPO-PEO block copolymer

Hydrophobic modification PEO-PPO copolymer BP123 was synthesized, with two aromatic rings in the centre linked to PEO-PPO blocks, and the identical PEO and PPO block numbers were possessed with commercial copolymer P123. The influence of three common pharmaceutical excipient salts sodium chloride (NaCl), sodium citrate (NaCA) and sodium benzoate (NaBZ) on self-assembly behaviors of BP123 and P123 was investigated via cloud point, surface tension, pyrene fluorescence and dynamic light scattering. Solubilization for hydrophobic drug simvastatin (SV) and in vitro drug release behavior were assessed accordingly. In the presence of NaCl or NaCA, cloud point and critical micellization concentration (CMC) decreased, micelles became more hydrophobic, micellar size and drug solubilization increased, drug release rate slowed, and the impact of NaCA was more significant than NaCl. Oppositely, cloud point and CMC increased with the addition of NaBZ. NaBZ could participate in the formation of micelles by hydrophobic aromatic ring, which greatly raised solubilization of SV. Moreover, a different performance occurred when NaBZ was added to BP123 or P123, due to the hydrophobic benzene rings in BP123, which prominently enhanced the interaction with hydrophobic drug, leading to obvious delay of drug release for BP123. This work is conducive to turning copolymer property in diverse pharmaceutical applications and in drug delivery systems as drug carriers.

In vitro and in vivo assessment of delivery of hydrophobic molecules and plasmid DNAs with PEO–PPO–PEO polymeric micelles on cornea

The stability and bio-distribution of genes or drug complexes with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO–PPO–PEO, Pluronic F-68) polymeric micelles (PM) are essential for an effective nanosized PM delivery system. We used Förster resonance energy transfer (FRET) pairs with PM and measured the FRET ratio to assess the stability of PM in vitro and in vivo on the cornea. The FRET ratio reached a plateau at 0.8 with 3% PM. Differential scanning calorimetry measurement confirmed the complex formation of FRET pairs with PM. Confocal imaging with the fluorophores fluorescein isothiocyanate isomer I (FITC) and rhodamine B base (RhB) also showed the occurrence of FRET pairs in vitro. The fluorophores were mixed with 3% PM solution or the FITC-labeled PEO–PPO–PEO polymers (FITC-P) were mixed with RhB-labeled plasmids (RhB–DNA). In addition, the in vitro corneal permeation of FRET pair complexes with PM reached a 0.8 FRET ratio. One hour after eye drop administration, FRET pairs colocalized in the cytoplasm, and surrounded and entered the nuclei of cells in the cornea, and the polymers were located in the corneal epithelial layers, as detected through anti-PEG immunohistochemistry. Furthermore, fluorescence colocalization in the cytoplasm and cell nucleus of the corneal epithelium was confirmed in tissues where RhB or RhB–DNA complexed with FITC-P was found to accumulate. We demonstrate that at a concentration of 3%, PM can encapsulate FRET pairs or RhB–DNA and retain their integrity within the cornea 1 h after administration, suggesting the feasibility and stability of PEO–PPO–PEO polymers as a vehicle for drug delivery.

Multicellular Tumor Spheroids (MCTS) as a 3D In Vitro Evaluation Tool of Nanoparticles

Multicellular tumor spheroid models (MCTS) are often coined as 3D in vitro models that can mimic the microenvironment of tissues. MCTS have gained increasing interest in the nano-biotechnology field as they can provide easily accessible information on the performance of nanoparticles without using animal models. Considering that many countries have put restrictions on animals testing, which will only tighten in the future as seen by the recent developments in the Netherlands, 3D models will become an even more valuable tool. Here, an overview on MCTS is provided, focusing on their use in cancer research as most nanoparticles are tested in MCTS for treatment of primary tumors. Thereafter, various types of nanoparticles-from self-assembled block copolymers to inorganic nanoparticles, are discussed. A range of physicochemical parameters including the size, shape, surface chemistry, ligands attachment, stability, and stiffness are found to influence nanoparticles in MCTS. Some of these studies are complemented by animal studies confirming that lessons from MCTS can in part predict the behaviour in vivo. In summary, MCTS are suitable models to gain additional information on nanoparticles. While not being able to replace in vivo studies, they can bridge the gap between traditional 2D in vitro studies and in vivo models.

Time-responsive osteogenic niche of stem cells: A sequentially triggered, dual-peptide loaded, alginate hybrid system for promoting cell activity and osteo-differentiation

The efficacy of stem cell-based bone tissue engineering has been hampered by cell death and limited fate control. A smart cell culture system with the capability of sequentially delivering multiple factors in specific growth stages, like the mechanism of the natural extracellular matrix modulating tissue formation, is attractive for enhancing cell activity and controlling cell fate. Here, a bone forming peptide-1 (BFP-1)-laden mesoporous silica nanoparticles (pep@MSNs) incorporated adhesion peptide, containing the arginine-glycine-aspartic acid (RGD) domain, modified alginate hydrogel (RA) system (pep@MSNs-RA) was developed to promote the activity and stimulate osteo-differentiation of human mesenchymal stem cells (hMSCs) in sequence. The survivability and proliferation of hMSCs were enhanced in the adhesion peptide modified hydrogel. Next, BFP-1 released from pep@MSNs induced hMSCs osteo-differentiation after the proliferation stage. Moreover, BFP-1 near the cells was self-captured by the additional cell-peptide cross-linked networks formed by the ligands (RGD) binding to receptors on the cell surface, leading to long-term sustained osteo-stimulation of hMSCs. The results suggest that independent and sequential stimulation in proliferation and osteo-differentiation stages could synergistically enhance the survivability, expansion, and osteogenesis of hMSCs, as compared to stimulating alone or simultaneously. Overall, this study provided a new and valid strategy for stem cell expansion and osteo-differentiation in 2D or 3D culture systems, possessing potential applications in 3D bio-printing and tissue regeneration.

An injectable double-network hydrogel for the co-culture of vascular endothelial cells and bone marrow mesenchymal stem cells for simultaneously enhancing vascularization and osteogenesis

Utilization of a GC/Alg DN hydrogel for the co-culture of BM-MSCs with VECs to promote vascularization and osteogenesis simultaneously.

Application of 3D cultured multicellular spheroid tumor models in tumor-targeted drug delivery system research

Tumor-targeted drug delivery systems are promising for their advantages in enhanced tumor accumulation and reduced toxicity towards normal organs. However, few nanomedicines have been successfully translated into clinical application. One reason is the gap between current pre-clinical and clinical studies. The prevalent in vitro models utilized in pre-clinical phase are mainly based on the two-dimensional (2D) cell culture and are limited by the difficulty of simulating three-dimensional physiological conditions in human body, such as three-dimensional (3D) architecture, cell heterogeneity, nutrient gradients and the interaction between cells and the extracellular matrix (ECM). In addition, traditional animal models have drawbacks such as high-cost, long periods and physiological differences between animal and human. On the other hand, the employment of 3D tumor cell culture models, especially multicellular tumor spheroids (MCTS), has increased significantly in recent decades. These models have been shown to simulate 3D structures of tumors in vitro with relatively low cost and simple protocols. Currently, MCTS have also been widely exploited in drug delivery system research for comprehensive study of drug efficacy, drug penetration, receptor targeting, and cell recruitment abilities. This review summarizes the delivery barriers for nano-carriers presented in tumor microenvironment, the characteristics and formation methods for applicable multicellular tumor spheroid culture models and recent studies related to their applications in tumor-targeted drug delivery system research.

Intravenous and intratumoral injection of Pluronic P94: The effect of administration route on biodistribution and tumor retention

Pluronics P94 are block-copolymer showing prolonged circulation time and tumor-cell internalization in vitro, suggesting a potential for tumor accumulation and as a drug carrier. Here we report the results of the radiolabeled-P94 unimers (P94-¹¹¹In-DTPA) on tumor uptake/retention and biodistribution after intravenous and intratumoral injection to tumor-bearing mice. Intravenous administration results in a high radioactive signal in the liver; while in tumor and other healthy tissues only low levels of radioactivity could be measured. In contrast, the intratumoral injection of P94 resulted in elevated levels of radioactivity in the tumor and low levels in other organs, including the liver. Independently from the injection route, the tumor tissue presented long retention of radioactivity. The minimal involvement of off-target tissues of P94, together with the excellent tracer retention over-time in the tumor designates Pluronic P94 copolymer as a highly promising carrier for anti-tumor drugs.

Spheroid culture of primary hepatocytes with short fibers as a predictable in vitro model for drug screening

Short fibers are utilized as scaffolds for generation of size-controlled hepatocyte spheroids, exhibiting an efficient in vitro model for determining drug metabolism.