Local arterial wall drug delivery using balloon catheter system

The factors influencing the efficiency of drug-coated balloons

The drug-coated balloon (DCB) is an emerging percutaneous coronary intervention (PCI) device that delivers drugs to diseased vessels to decrease the rate of vascular stenosis. Recent clinical studies have demonstrated that DCBs tend to have both good safety and efficacy profiles, leading to extended application indications in the clinic, including in-stent restenosis (ISR) for metal stents such as drug-eluting stents (DESs), small vascular disease, bifurcation disease, large vascular disease, acute coronary syndrome (ACS), and high bleeding risk. However, some previous clinical data have suggested that DCBs performed less effectively than DESs. No studies or reviews have systematically discussed the improvement strategies for better DCB performance until now. Drug loss during the process of delivery to the target lesion and inefficient delivery of the coating drug to the diseased vascular wall are two key mechanisms that weaken the efficiency of DCBs. This review is the first to summarize the key influencing factors of DCB efficiency in terms of balloon structure and principles, and then it analyzes how these factors cause outcomes in practice based on current clinical trial studies of DCBs in the treatment of different types of lesions. We also provide some recommendations for improving DCBs to contribute to better DCB performance by improving the design of DCBs and combining other factors in clinical practice.

Renal Artery Catheterization for Microcapsules' Targeted Delivery to the Mouse Kidney

The problem of reducing the side effects associated with drug distribution throughout the body in the treatment of various kidney diseases can be solved by effective targeted drug delivery. The method described herein involves injection of a drug encapsulated in polyelectrolyte capsules to achieve prolonged local release and long-term capillary retention of several hours while these capsules are administered via the renal artery. The proposed method does not imply disruption (puncture) of the renal artery or aorta and is suitable for long-term chronic experiments on mice. In this study, we compared how capsule size and dosage affect the target kidney blood flow. It has been established that an increase in the diameter of microcapsules by 29% (from 3.1 to 4.0 μm) requires a decrease in their concentration by at least 50% with the same suspension volume. The photoacoustic method, along with laser speckle contrast imaging, was shown to be useful for monitoring blood flow and selecting a safe dose. Capsules contribute to a longer retention of a macromolecular substance in the target kidney compared to its free form due to mechanical retention in capillaries and slow impregnation into surrounding tissues during the first 1-3 h, which was shown by fluorescence tomography and microscopy. At the same time, the ability of capillaries to perform almost complete "self-cleaning" from capsular shells during the first 12 h leads to the preservation of organ tissues in a normal state. The proposed strategy, which combines endovascular surgery and the injection of polymer microcapsules containing the active substance, can be successfully used to treat a wide range of nephropathies.

Recent advance in treatment of atherosclerosis: Key targets and plaque-positioned delivery strategies

Atherosclerosis, a chronic inflammatory disease of vascular wall, is a progressive pathophysiological process with lipids oxidation/depositing initiation and innate/adaptive immune responses. The coordination of multi systems covering oxidative stress, dysfunctional endothelium, diseased lipid uptake, cell apoptosis, thrombotic and pro-inflammatory responding as well as switched SMCs contributes to plaque growth. In this circumstance, inevitably, targeting these processes is considered to be effective for treating atherosclerosis. Arriving, retention and working of payload candidates mediated by targets in lesion direct ultimate therapeutic outcomes. Accumulating a series of scientific studies and clinical practice in the past decades, lesion homing delivery strategies including stent/balloon/nanoparticle-based transportation worked as the potent promotor to ensure a therapeutic effect. The objective of this review is to achieve a very brief summary about the effective therapeutic methods cooperating specifical targets and positioning-delivery strategies in atherosclerosis for better outcomes.

High-Resolution MR for Follow-Up of Intracranial Steno-Occlusive Disease Treated by Endovascular Treatment

Background and Purpose: An endovascular recanalization is an alternative option for symptomatic intracranial atherosclerotic steno-occlusive disease (ICAD). Accurate non-invasive alternatives to digital subtraction angiography (DSA) for follow-up imaging after endovascular treatment are desirable. We aimed to evaluate the image quality and diagnostic performance of high-resolution magnetic imaging in follow-up using DSA as a reference. Materials and Methods: From January 2017 to June 2021, data from 35 patients with 40 intracranial steno-occlusive lesions who underwent endovascular recanalization and received high-resolution magnetic resonance (HR-MR) follow-up were retrospectively collected in our prospective database. Studies were evaluated for the quality of visualization of the vessel lumen, restenosis rate, and accuracy of high-resolution magnetic resonance (HR-MR) with DSA used as the reference standard. Intraclass correlation coefficient (ICC) analyses were performed to assess the agreement between the two different readers. Results: In total, 40 intracranial steno-occlusive lesions in 35 patients, with 34 lesions undergoing balloon angioplasty [including 16 drug-coated balloons (DCBs)] and 8 lesions undergoing stenting were enrolled. The median age was 63.6 years (IQR 58.5-70.0 years), and the mean imaging follow-up time was 9.5 months (IQR 4.8-12.5 months). The median degrees of preprocedural and residual stenosis were 85.0% (IQR 75.0-99.0%) and 32.8% (IQR 15.0-50.0%), respectively. Intracranial periprocedural complications occurred in 1 (3.6%) patient. In the case of a stainless-steel stent (n = 1), there was a signal drop at the level of the vessel, which did not allow evaluation of the vessel lumen. However, this was visible in the case of nitinol stents (n = 7) and angioplasty (n = 34). The overall restenosis rate was 25.8% (n = 9). The DCB subgroup showed a lower rate of restenosis than the percutaneous transluminal angioplasty (PTA) subgroup [5.3% (2/13) vs. 35.7% (5/14)]. Conclusion: High-resolution magnetic resonance may be a reliable non-invasive method for demonstrating the vessel lumen and diagnostic follow-up after endovascular recanalization for ICAD. Compared with MR angiography (MRA), HR-MR showed a higher inter-reader agreement and could provide more information after endovascular recanalization, such as enhancement of the vessel wall.

Drug-Coated Balloons for the Treatment of Symptomatic Intracranial High-Grade Stenosis: A Review of the Current Rationale

Symptomatic intracranial atherosclerotic disease (sICAD) remains a challenging disorder in the neurovascular field. Despite best medical treatment, the recurrence rate for stroke remains high in patients with intracranial high-grade stenosis (>70–99%). Furthermore, two large randomized trials (SAMMPRIS and VISSIT) failed to prove the efficacy of percutaneous transluminal angioplasty and stenting in patients with sICAD. Drug-coated balloon percutaneous transluminal angioplasty (DCB-PTA) represents an alternative treatment modality with therapeutic benefits for interventional cardiology. However, there are very few articles in the existing literature that relate to the use of DCB-PTA in sICAD patients. Here, we aimed to review the rationale underlying the use of DCB-PTA in sICAD patients and summarize recent developments in the neurovascular field.

Drug-Coated Balloon Treatment in Symptomatic Intracranial High Grade Stenosis : A Retrospective Study of 33 Patients

PURPOSE

Endovascular therapy (EVT) represents an alternative treatment modality for symptomatic intracranial high-grade atherosclerotic stenosis (sICAS); however, periprocedural complication rates as well as midterm restenosis rates represent relevant limitations of EVT. Drug-coated balloon percutaneous transluminal angioplasty (DCB-PTA) may overcome some of these shortcomings. The aim of this study was to assess feasibility and safety as well as the stroke recurrence rate in 33 patients.

METHODS

A retrospective, monocentric cohort study of sICAS patients treated with DCB-PTA. Outcome measures were the periprocedural intracranial complication rate, the recurrent stroke rate and mortality during follow-up.

RESULTS

This cohort study included 33 patients with 35 sICAS treated with DCB-PTA. The median age was 72 years (interquartile range, IQR 66-77 years); median clinical and mean radiological follow-up time was 9 months (IQR 3-22 months). Median preprocedural degree of stenosis (WASID) was 80% (IQR 73-80%) and median postprocedural residual stenosis degree (WASID) was 50% (IQR 33-60%). Intracranial periprocedural complications occurred in 2 (6%) patients. The overall restenosis rate was 15% (n = 5). In four patients a symptomatic ischemic re-event occurred within 7 months after the initial treatment. None of the patients died.

CONCLUSION

This DCB-PTA cohort study showed a relatively low intracranial complication rate of 6% with a symptomatic recurrence rate of 12%. Larger trials are needed to validate these promising observations.

Stent coating by electrospinning with chitosan/poly-cyclodextrin based nanofibers loaded with simvastatin for restenosis prevention

The main cause of failure of angioplasty stenting is restenosis due to neointimal hyperplasia, a too high proliferation of smooth muscle cells (SMC). The local and sustained delivery of selective pleiotropic drugs to limit SMC proliferation seems to be the hopeful solution to minimize this post surgery complication. The aim of this study is to develop a stent covered by nanofibers (NFs) produced by electrospinning, loaded with simvastatin (SV), a drug commonly used for restenosis prevention. NFs were prepared from the electrospinning of a solution containing SV and a mixture of chitosan (cationic) and β-cyclodextrin (CD) polymer (anionic) which form together a polyelectrolyte complex that makes up the NFs matrix. First, the SV/CD interactions were studied by phase solubility diagram, DRX and DSC. The electrospinning process was then optimized to cover a self-expandable NiTiNOL stent and the mechanical resistance of the NFs sheath upon its introduction inside the delivery catheter was considered, using a crimper apparatus. The morphology, coating thicknesses and diameters of nanofibers were studied by scanning electron microscopy. The SV loading rates on the stents were controlled by the electrospinning time, and the presence of SV in the NFs was confirmed by FTIR. NFs stability in PBS pH 7.4 buffer could be improved after thermal post-treatment of NFs and in vitro release of SV in dynamic conditions demonstrated that the release profiles were influenced by the presence of CD polymer in NFs and by the thickness of the NFs sheath. Finally, a covered stent delivering 3 µg/mm² of SV within 6 h was obtained, whose efficiency will be investigated in a further in vivo study.

Device profile of different paclitaxel-coated balloons: Neuro Elutax SV, Elutax '3' Neuro and SeQuent Please NEO for the treatment of symptomatic intracranial high-grade stenosis: overview of their feasibility and safety

Introduction: Intracranial atherosclerotic disease (ICAD) is highly prevalent and probably the most common cause of stroke worldwide. Despite best medical treatment (BMT), the rate of recurrent stroke in symptomatic ICAD patients is elevated, especially in those with high-grade stenosis. Thus, alternative treatment options are needed. So far, endovascular ICAD treatment has been considered a second-line therapy. However, recent progress in the endovascular acute stroke treatment challenges this issue. Drug-coated balloon (DCB) - percutaneous transluminal angioplasty (PTA) represents a promising alternative to BMT alone.Areas covered: In this review, current clinical studies on paclitaxel-coated DCB-PTA in symptomatic high-grade ICAD patients will be presented and discussed. Furthermore, technical profile of the different paclitaxel-coated DCB, which has been used for intracranial use (Neuro Elutax SV, Elutax '3' Neuro, and SeQuent Please NEO) are being presented.Expert opinion: Despite limited data and its experimental (off-line) use, DCB-PTA has been demonstrated to be feasible and safe in selected ICAD patients with symptomatic high-grade stenosis. DCB-PTA offers several advantages compared to alternative endovascular therapy option as well as BMT alone. Consequently, DCP-PTA might be a promising candidate for the future armamentarium in ICAD treatment.

Development of an automated micropipette coating method for drug-coated balloons

Drug-coated balloons (DCBs) are a recent technology developed to treat peripheral artery disease (PAD). Along with a suitable formulation of antiproliferative drug and excipient, coating method is an important aspect of a DCB as these factors affect coating characteristics and drug delivery to the treatment site. The multiple release tailored medical devices DCB (MR-TMD-DCB), designed to achieve multiple inflations to treat complex PAD, contains paclitaxel (PAT) as the antiproliferative drug and polyethylene oxide (PEO) as the excipient. In our previous studies, the MR-TMD-DCB was coated using a manual dip coating method. In this study, an automated micropipette coating method was developed using a modified spray coating instrument to coat the MR-TMD-DCB. First, the coating formulation and strategy was optimized. A drug formulation of 16 wt% PAT and 4% wt/vol PEO, a polymer formulation of 2.5% wt/vol PEO, and a total of two drug layers produced a mostly uniform and thin coating with no defects and acceptable drug load. The balloon also had optimal drug uptake in arterial tissue in an in vitro flow model. Next, the reproducibility of the coating strategy was improved by optimizing the instrument parameters. The optimized instrument parameters (translational speed = 0.150 in/s, revolution rate = 100 rpm, flow rate = 0.6 ml/min) resulted in improved reproducibility of the drug load and similar coating properties as the DCB. This study demonstrated the ability to automate the micropipette process to obtain a balloon with optimal coating properties and drug tissue uptake.

Angioplasty Using Drug-Coated Balloons in Ostial Vertebral Artery Stenosis

BACKGROUND

Ostial vertebral artery stenosis (OVAS) is a relevant cause of acute ischemic posterior circulation stroke. Percutaneous trans-luminal angioplasty (PTA) might offer a promising treatment modality, but restenosis rate is high. So far, little is known about recanalization using drug-coated balloons (DCB) in OVAS. We aimed to show feasibility and safety of DCB-PTA in OVAS.

METHODS

Retrospective, monocenter case series of 12 patients with ostial vertebral artery stenosis (≥50%) treated with PTA using a drug-coated balloon.

RESULTS

Median age was 69.5 years (IQR 57-78.5) with a female rate of 41%. Patients were treated either with a SeQuent Please NEO or Neuro Elutax SV DEB. Median preinterventional stenosis degree was 75% (IQR 70-85) with a median lesion length of 4.5 mm (IQR 4-7.5). Median postinterventional stenosis degree was 40% (IQR 27-50). All treated vessels remained patent. No major complications such as dissection, vessel perforation, hemorrhage, or ischemic events occurred. Moreover, we did not detect any restenosis during a median follow-up period of 6.1 months. The clinical outcome was excellent with median mRS scale of 0 (IQR 0-1).

CONCLUSIONS

PTA using drug-coated balloons is feasible and safe in patients with ostial vertebral artery stenosis.

Optimization of balloon coating process for paclitaxel coated balloons via micro-pipetting method

Drug coated balloons (DCBs) have proven to be a suitable alternative for the treatment of cardiovascular diseases. They allow for uniform delivery of an antiproliferative drug to the stenotic site without permanent implantation of the device in the patient's body. There are, however, regulatory concerns regarding the lack of data associated with variable drug delivery to the target site, which can be related to the coating process. This study describes the process for an in-house micro-pipetting coating method that incorporates a laboratory-developed coating equation for determining optimal coating parameters. The coating solutions included a common drug of choice, paclitaxel, along with a hydrophilic excipient, such as iopromide. It was found that using a revolution rate of 240 rev/min, a flow rate of 25 µL/min and a translational speed of 0.033 cm/s resulted in visually uniform coatings. High performance liquid chromatography (HPLC) allowed for the determination of paclitaxel content on the balloon surface. Scanning electron microscopy (SEM) enabled analysis of coating thickness and texture at distal, middle, and proximal positions on the balloon; average thicknesses were determined to be 16.4 ± 5.8, 14.8 ± 1.4, and 18.1 ± 3.9 µm, respectively. These optimized coating conditions have been confirmed by in vitro drug release kinetics studies. Overall this study generated a simple and reproducible micro-pipetting coating method for the sustained release of drugs from the drug coated balloons.

Effect of Interstitial Fluid Flow on Drug-Coated Balloon Delivery in a Patient-Specific Arterial Vessel with Heterogeneous Tissue Composition: A Simulation Study

Angioplasty with drug-coated balloons (DCBs) using excipients as drug carriers is emerging as a potentially viable strategy demonstrating clinical efficacy and proposing additional compliance for the treatment of obstructive vascular diseases. An attempt is made to develop an improved computational model where attention has been paid to the effect of interstitial flow, that is, plasma convection and internalization of bound drug. The present model is capable of capturing the phenomena of the transport of free drug and its retention, and also the internalization of drug in the process of endocytosis to atherosclerotic vessel of heterogeneous tissue composition comprising of healthy tissue, as well as regions of fibrous cap, fibro-fatty, calcified and necrotic core lesions. Image processing based on an unsupervised clustering technique is used for color-based segmentation of a patient-specific longitudinal image of atherosclerotic vessel obtained from intravascular ultrasound derived virtual histology. As the residence time of drug in a stent-based delivery within the arterial tissue is strongly influenced by convective forces, effect of interstitial fluid flow in case of DCB delivery can not be ruled out, and has been investigated by modeling it through unsteady Navier-Stokes equations. Transport of free drug is modeled by considering unsteady advection-reaction-diffusion process, while the bound drug, assuming completely immobilized in the tissue, by unsteady reaction process. The model also takes into account the internalization of drug through the process of endocytosis which gets degraded by the lysosomes and finally recycled into the extracellular fluid. All the governing equations representing the flow of interstitial fluid, the transport of free drug, the metabolization of free drug into bound phase and the process of internalization along with the physiologically realistic boundary and initial conditions are solved numerically using marker and cell method satisfying necessary stability criteria. Simulated results obtained predict that faster drug transfer promotes rapid saturation of binding sites despite perivascular wash out and the concentrations of all drug forms are modulated by the presence of interstitial flow. Such premier attempt of its kind would certainly be of great help in the optimization of therapeutic efficacy of drug.

Periadventitial local drug delivery to target restenosis

The adventitia functions as a dynamic compartment for cell trafficking into and out of the artery wall, and communicates with medial and intimal cells. The resident cells in the tunica adventitia play an integral role in the regulation of vessel wall structure, repair, tone, and remodeling. Following injury to the vascular wall, adventitial fibroblasts are activated, which proliferate and differentiate into migratory myofibroblasts, and initiate inflammation through the secretion of soluble factors such as chemokines, cytokines, and adhesion molecules. The secreted factors subsequently promote leukocyte recruitment and extravasation into the media and intima. The adventitia generates reactive oxygen species and growth factors that participate in cell proliferation, migration, and hypertrophy, resulting in intimal thickening. The adventitial vasa vasorum undergoes neovascularization and serves as a port of entry for the delivery of inflammatory cells and resident stem/progenitor cells into the intima, and thus facilitates vascular remodeling. This review highlights the contribution of multilineage cells in the adventitia along with de-differentiated smooth muscle-like cells to the formation of neointimal hyperplasia, and discusses the potential of periadventitial local drug delivery for the prevention of vascular restenosis.

In vitro particulate and in vivo drug retention study of a novel polyethylene oxide formulation for drug-coated balloons

OBJECTIVE

The purpose of this study was to investigate the newly developed drug-coated balloon (DCB) using polyethylene oxide (PEO) as a platform and to compare it directly with a commercially available DCB in a preclinical experimental setting.

METHODS

The PEO balloon was characterized for coating morphology and degree of paclitaxel (PAT) crystallinity. PAT tissue levels were then measured up to 30 days in a healthy porcine model (10 swine, 20 vessels) after treatment with either a PEO balloon or a commercially available DCB. An in vitro bench-top model was used to compare the particulates released from the PEO balloon and commercially available DCB.

RESULTS

The coating on the PEO balloon was smooth and homogeneous with PAT in its amorphous state. From the porcine survival study, the PAT tissue levels were comparable between PEO balloon and commercially available DCB after 7 days of treatment. Both the PEO balloon and the commercially available DCB retained therapeutic drug up to 30 days. During the simulated in vitro model, the PEO balloon shed significantly fewer particulates that were smaller than those of the commercially available DCB. Most important, the PEO balloon shed 25 times fewer large particulates than the commercially available DCB.

CONCLUSIONS

The amorphous PAT in the PEO balloon provided comparable drug tissue retention levels to those of the commercially available DCB and fewer particulates. Thus prepared PEO balloon proved to be safe and effective in the preclinical experimental setting. The clinical outcomes of these findings need further investigation.