Amphiphilic polysaccharides as building blocks for self-assembled nanosystems: molecular design and application in cancer and inflammatory diseases

Mitochondrial Targeted Thermosensitive Nanocarrier for Near-Infrared-Triggered Precise Synergetic Photothermal Nitric Oxide Chemotherapy

Nitric oxide (NO) intervenes, that is, a potential treatment strategy, and has attracted wide attention in the field of tumor therapy. However, the therapeutic effect of NO is still poor, due to its short half-life and instability. Therapeutic concentration ranges of NO should be delivered to the target tissue sites, cell, and even subcellular organelles and to control NO generation. Mitochondria have been considered a major target in cancer therapy for their essential roles in cancer cell metabolism and apoptosis. In this study, mesoporous silicon-coated gold nanorods encapsulated with a mitochondria targeted and the thermosensitive lipid layer (AuNR@MSN-lipid-DOX) served as the carrier to load NO prodrug (BNN6) to build the near-infrared-triggered synergetic photothermal NO-chemotherapy platform (AuNR@MSN(BNN6)-lipid-DOX). The core of AuNR@MSN exhibited excellent photothermal conversion capability and high loading efficiency in terms of BNN6, reaching a high value of 220 mg/g (w/w), which achieved near-infrared-triggered precise release of NO. The outer biocompatible lipid layer, comprising thermosensitive phospholipid DPPC and mitochondrial-targeted DSPE-PEG2000-DOX, guided the whole nanoparticle to the mitochondria of 4T1 cells observed through confocal microscopy. In the mitochondria, the nanoparticles increased the local temperature over 42 °C under NIR irradiation, and a high NO concentration from BNN6 detected by the NO probe and DSPE-PEG2000-DOX significantly inhibited 4T1 cancer cells in vitro and in vivo under the synergetic photothermal therapy (PTT)-NO therapy-chemotherapy modes. The built NIR-triggered combination therapy nanoplatform can serve as a strategy for multimodal collaboration.

Panax Notoginseng polysaccharide stabilized gel-like Pickering emulsions: Stability and mechanism

In this work, the polysaccharide from Panax Notoginseng (SPNP), a traditional herb in China, was used as an outstanding Pickering stabilizer to fabricate Pickering emulsions. The SPNP was characterized to be a porous network structure with a rough surface surrounded by some nanoparticles. Rheological measurement of the obtained Pickering emulsions demonstrated the formation of emulsion gels. Moreover, the emulsions exhibited excellent storage (14 days), pH (1.0-11.0), ionic strength (0-500 mM), and temperature (4-50 °C) stabilities. In addition, the Pickering emulsions showed a freeze-thaw stability, which is beneficial in food, cosmetic or biomedical applications when they may require freezing for storage and melting before use. Confocal laser scanning microscope (CLSM) and cryo-scanning electron microscopy (cryo-SEM) results showed that SPNPs effectively adsorbed at the oil-water interface by forming a compact three-dimensional (3D) network structure and multilayer anchoring on the surface of the emulsion droplets, thus inhibiting the droplet coalescence and flocculation. This study provides a kind of Pickering emulsions applicable in food, biomedical and cosmetic industries.

Nanosilver-functionalized polysaccharides as a platform for wound dressing

Polysaccharides that are naturally sourced have enormous promise as wound dressings, due to their wider availability and reasonable cost and good biocompatibility. Furthermore, nanosilver extensively applied in wound treatment is attributed to its broad spectrum of antimicrobial effects and lesser drug resistance. Consequently, wound dressings in corporating nanosilver have attracted wide-scale interest in wound healing, and nanosilver-functionalized polysaccharide-based wound dressings present an affordable option for healing of chronic wounds. This review encompasses preparation methods, classification, and antibacterial performances of nanosilver wound dressings. The prospective research arenas of nanosilver-based wound polysaccharide dressings are also elaborated. The review attempts to include a summary of the most recent advancements in silver nanotechnology as well as guidance for the investigation of nanosilver-functionalized polysaccharide-based wound dressings.

Lipid-functionalized gold nanorods with plug-to-direct mitochondria targeting ligand for synergetic photothermal-chemotherapy of tumor therapy

Mitochondria targeting therapeutic strategies are promising for more effective and precise cancer therapy. Photothermal therapy are extensively studied as noninvasive cancer treatment. With regards to all-in-one nanocarrier-mediated drug delivery platform, it is still a challenge to enhance one of the features but not compromise other merits. Herein, we present a mitochondrial targeting photothermal-chemotherapy all-in-one nanoplatform involving lipid-functionalized gold nanorods (AuNR) with plug-to-direct mitochondria targeting ligand for synergetic enhanced tumor therapy. Firstly, AuNR were modified by DSPE-PEG-SH owing to the special affinity of sulfhydryl group and gold. And then, DSPE-PEG-DOX with mitochondrial targeting character was directly inserted into DSPE-PEG-SH layer. Meanwhile, paclitaxel (PTX) was loaded in hydrophobic region of the lipid layer. Quite different from introducing additional mitochondrial targeting molecules, we incorporated amphiphilic DSPE-PEG-DOX into a DSPE-PEG-SH layer modified around AuNR to achieve both mitochondrial targeting, photothermal and dual drug loading in a simple AuNR-lipid-DOX/PTX platform, in the case that efficiently enhanced production of reactive oxygen species (ROS) in mitochondria and excellent anti-tumor efficacy were achieved. With good biocompatibility, the constructed nanoplatform based on lipid-functionalized AuNR synergistically combined mitochondrial targeted DSPE-PEG-DOX with mitochondrial-acted PTX and photothermal therapy (PTT), which provided a feasible strategy for organelle-targeted combination PTT-chemotherapy to improve therapeutic effects.

Role of Hydrophobic Associations in Self-Healing Hydrogels Based on Amphiphilic Polysaccharides

Self-healing hydrogels have the ability to recover their original properties after the action of an external stress, due to presence in their structure of reversible chemical or physical cross-links. The physical cross-links lead to supramolecular hydrogels stabilized by hydrogen bonds, hydrophobic associations, electrostatic interactions, or host-guest interactions. Hydrophobic associations of amphiphilic polymers can provide self-healing hydrogels with good mechanical properties, and can also add more functionalities to these hydrogels by creating hydrophobic microdomains inside the hydrogels. This review highlights the main general advantages brought by hydrophobic associations in the design of self-healing hydrogels, with a focus on hydrogels based on biocompatible and biodegradable amphiphilic polysaccharides.

In situ self-assembly of amphiphilic dextran micelles and superparamagnetic iron oxide nanoparticle-loading as magnetic resonance imaging contrast agents

Polymeric micelles have long been considered as promising nanocarrier for hydrophobic drugs and imaging probes, due to their nanoscale particle size, biocompatibility and ability to loading reasonable amount of cargoes. Herein, a facile method for dextran micelles preparation was developed and their performance as carriers of superparamagnetic iron oxide (SPIO) nanocrystals was evaluated. Amphiphilic dextran (Dex-g-OA) was synthesized via the Schiff base reactions between oxidized dextran and oleylamine, and self-assembled in situ into nano-size micelles in the reaction systems. The self-assembling behaviors of the amphiphilic dextran were identified using fluorescence resonance energy transfer technique by detection the energy transfer signal between the fluorophore pairs, Cy5 and Cy5.5. Hydrophobic SPIO nanoparticles (Fe₃O₄ NPs) were successfully loaded into the dextran micelles via the in situ self-assembly process, leading to a series of Fe₃O₄ NPs-loaded micelle nanocomposites (Fe₃O₄@Dex-g-OA) with good biocompatibility, superparamagnetism and strongly enhanced T ₂ relaxivity. At the magnetic field of 0.5 T, the Fe₃O₄@Dex-g-OA nanocomposite with particle size of 116.2 ± 53.7 nm presented a higher T ₂ relaxivity of 327.9 mM Fe - 1 ·s^-1. The prepared magnetic nanocomposites hold the promise to be used as contrast agents in magnetic resonance imaging.

Malto-oligosaccharides as critical functional ingredient: a review of their properties, preparation, and versatile applications

Malto-oligosaccharides (MOS) are α-1,4 glycosidic linked linear oligosaccharides of glucose, which have a diverse range of functional applications in the food, pharmaceutical, and other industries. They can be used to modify the physicochemical properties of foods thereby improving their quality attributes, or they can be included as prebiotics to improve their nutritional attributes. The degree of polymerization of MOS can be controlled by using specific enzymes, which means their functionality can be tuned for specific applications. In this article, we review the chemical structure, physicochemical properties, preparation, and functional applications of MOS in the food, health care, and other industries. Besides, we offer an overview for this saccharide from the perspective of prospect functional ingredient, which we feel lacks in the current literature. MOS could be expected to provide a novel promising substitute for functional oligosaccharides.

Size-adjustable self-assembled nanoparticles through microfluidic platform promotes neuronal differentiation of mouse embryonic stem cells

Neuronal differentiation from stem cells is one of the most potent therapeutic approaches for recovering neurological function in individuals with neurodegenerative disorders. Herein, an on-demand intracellular retinoic acid released nanoparticles with tunable size and accurately controlled physico-biological properties have been prepared for achieving efficient neuronal differentiation. The amphiphilic chitosan oligosaccharide-cholesterol copolymers were synthesized by varying cholesterol content and self-assembled into spherical micelle in a microfluidic chip with different flow rates. Notably, the results indicated that by increasing the lipophilicity of the chitosan chain as well as mixing rate, the size of micelles was decreased. Retinoic acid (RA) was efficiently encapsulated in the core of micelles. The retinoic acid-containing nanoparticles could escape lysosome, accumulate in the cytoplasm, and release payload with a sustained pattern. The cytotoxicity assay of free retinoic acid and retinoic acid-loaded formulations against P19 embryonic stem cells confirmed the desirable safety of micelles. The result obtained from the uptake study showed that internalization of micelles occurs predominantly via lipid-raft endocytosis in the presence of higher cholesterol content. Moreover, the intracellular RA release upregulated the expression levels of neuronal factors. The micelles described here offer a promising nanomedicine strategy for neuronal differentiation of stem cells.

Functional supramolecular micelles driven by the amphiphilic complex of biotin-acyclic cucurbituril and cannabidiol for cell-targeted drug delivery

Precise delivery of hydrophobic drugs has always been a great challenge for drug delivery systems. To overcome this problem, we designed and synthesized a novel supramolecular host biotin-acyclic cucurbituril (ACBB) at the first time, and we have developed a host-guest amphiphilic complex based on ACBB and amantadine-conjugated cannabinoids (AD-CBD) that self-assembles to form functionalized supramolecular micelles (FSMs) for cell-targeted drug delivery. The 1:1 stoichiometric ratio of the amphiphilic complex and its possible host-guest inclusion behaviors are obtained by fluorescence titration, nuclear magnetic resonance (NMR), Fourier transform-infrared spectroscopy (FT-IR) and thermal analysis (TGA and DSC). Using transmission electron microscope (TEM) and dynamic light scattering (DLS), we have observed that the shape of FSMs was spherical and size was 137-192 nm. In addition, MTT test results show that FSMs have good antitumor activity, taking MCF-7 as an example, the in vitro half-maximal inhibitory concentration (IC₅₀) values of FSMs were 1.53 μM and 5.02 μM, which were better than 30.83 μM of cisplatin. Confocal laser scanning microscopy (CLSM) results showed that FSMs loaded with Rhodamine B can specifically aggregate on the surface of tumor cells and the targeting ability has been directly verified. Flow cytometry results showed that FSMs could promote tumor cell apoptosis. All results indicated that FSMs had high bioavailability, stability, accurate targeting and excellent delivery efficiency, which had great application potential in the field of drug delivery.

Thermo-sensitive self-assembly of poly(ethylene imine)/(phenylthio) acetic acid ion pair in surfactant solutions

Poly(ethylene imine)/(phenylthio) acetic acid (PEI/PTA) ion pairs exhibited an upper critical solution temperature (UCST) behavior in an aqueous solution and the UCST was higher as the PTA content was more. The UCST of the ion pair decreased with increasing Brij S100 (BS 100, a nonionic surfactant) concentration but increased with increasing cetylpridinium chloride (CPC, a cationic surfactant) and sodium lauroylsarcosinate (SLS, an anionic surfactant) concentration. TEM microscopy demonstrated BS 100 markedly reduced the size of PEI/PTA ion pair self-assembly (IPSAM) whereas CPC and SLS had little effect on the size and the integrity of IPSAM. ¹H NMR spectroscopy showed the hydrophobic interaction among the phenyl groups of PEI/PTA ion pairs took place. It also demonstrated the hydrophobic interaction between BS 100 and PTA and the electrostatic interaction between CPC and PTA and between SLS and PEI occurred. X-ray photoelectron spectroscopy disclosed the PTA of PEI/PTA IPSAM could be readily oxidized by H₂O₂ even at a low concentration (e.g. 0.005%). IPSAM released its payload (i.e. nile red) in a temperature and oxidation-responsive manner. The surfactants (i.e. BS 100, CPC, and SLS) suppressed the thermally triggered release in a different way. The effectiveness of the surfactant to suppress the release was in the order of BS 100 > CPC > SLS. IPSAM released its content more extensively as H₂O₂ (an oxidizing agent) concentration was higher. The ionic surfactants (i.e. CPS and SLS) had little effect on the oxidation-induced release degree but the nonionic surfactant (BS 100) markedly suppressed the release degree.

Polysaccharide-Based Theranostic Systems for Combined Imaging and Cancer Therapy: Recent Advances and Challenges

Designing novel systems for efficient cancer treatment and improving the quality of life for patients is a prime requirement in the healthcare sector. In this regard, theranostics have recently emerged as a unique platform, which combines the benefits of both diagnosis and therapeutics delivery. Theranostics have the desired contrast agent and the drugs combined in a single carrier, thus providing the opportunity for real-time imaging to monitor the therapy results. This helps in reducing the hazards related to treatment overdose or underdose and gives the possibility of personalized therapy. Polysaccharides, as natural biomolecules, have been widely explored to develop theranostics, as they act as a matrix for simultaneously loading both contrast agents and drugs for their utility in drug delivery and imaging. Additionally, their remarkable physicochemical attributes (biodegradability, satisfactory safety profile, abundance, and diversity in functionality and charge) can be tuned via postmodification, which offers numerous possibilities to develop theranostics with desired characteristics. Hence, we provide an overview of recent advances in polysaccharide matrix-based theranostics for drug delivery combined with magnetic resonance imaging, computed tomography, positron emission tomography, single photon emission computed tomography, and ultrasound imaging. Herein, we also summarize the toxicity assessment of polysaccharides, associated contrast agents, and nanotoxicity along with the challenges and future research directions.

One-Pot Synthesis of Amphiphilic Biopolymers from Oxidized Alginate and Self-Assembly as a Carrier for Sustained Release of Hydrophobic Drugs

In this paper, we developed an organic solvent-free, eco-friendly, simple and efficient one-pot approach for the preparation of amphiphilic conjugates (Ugi-OSAOcT) by grafting octylamine (OCA) to oxidized sodium alginate (OSA). The optimum reaction parameters that were obtained based on the degree of substitution (DS) of Ugi-OSAOcT were a reaction time of 12 h, a reaction temperature of 25 °C and a molar ratio of 1:2.4:3:3.3 (OSA:OCA:HAc:TOSMIC), respectively. The chemical structure and composition were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD), thermogravimetry analyser (TGA), gel permeation chromatography (GPC) and elemental analysis (EA). It was found that the Ugi-OSAOcT conjugates with a CMC value in the range of 0.30–0.085 mg/mL could self-assemble into stable and spherical micelles with a particle size of 135.7 ± 2.4–196.5 ± 3.8 nm and negative surface potentials of −32.8 ± 0.4–−38.2 ± 0.8 mV. Furthermore, ibuprofen (IBU), which served as a model poorly water-soluble drug, was successfully incorporated into the Ugi-OSAOcT micelles by dialysis method. The drug loading capacity (%DL) and encapsulation efficiency (%EE) of the IBU-loaded Ugi-OSAOcT micelles (IBU/Ugi-OSAOcT = 3:10) reached as much as 10.9 ± 0.4–14.6 ± 0.3% and 40.8 ± 1.6–57.2 ± 1.3%, respectively. The in vitro release study demonstrated that the IBU-loaded micelles had a sustained and pH-responsive drug release behavior. In addition, the DS of the hydrophobic segment on an OSA backbone was demonstrated to have an important effect on IBU loading and drug release behavior. Finally, the in vitro cytotoxicity assay demonstrated that the Ugi-OSAOcT conjugates exhibited no significant cytotoxicity against RAW 264.7 cells up to 1000 µg/mL. Therefore, the amphiphilic Ugi-OSAOcT conjugates synthesized by the green method exhibited great potential to load hydrophobic drugs, acting as a promising nanocarrier capable of responding to pH for sustained release of hydrophobic drugs.

Synthesis, characterization and application of chitosan-N-(4-hydroxyphenyl)-methacrylamide derivative as a drug and gene carrier

The aim of this study was to develop a green method to fabricate a novel CS modified N-(4-hydroxyphenyl)- methacrylamide conjugate (CSNHMA) and to evaluate its biomedical potential. CSNHMA has been prepared by a simple method via aza Michael addition reaction between CS and N- (4-hydroxyphenyl)-methacrylamide (NHMA) in ethanol. Its structural and morphological properties were characterized by various analysis techniques. The obtained results confirmed that a highly porous network structure of CSNHMA was successfully synthesized via aza Michael addition reaction. Consequently, it was analyzed as a drug and gene carrier. CSNHMA/pGL3 showed an enhanced buffering capacity due to the presence of NHMA moiety leading to higher transfection efficiency in all cancer cells (A549, HeLa and HepG2) as compared to native CS and Lipofectamine®. Therefore, these findings clearly support the possibility of using CSNHMA as a good transfection agent. For in vitro drug release study, we prepared CSNHMA nanoparticles (NPs) and curcumin loaded CSNHMA NPs of size <230 nm respectively via the non-toxic ionic gelation route and the encapsulation efficiency of drug was found to be 77.03%. In vitro drug release studies demonstrated a faster and sustained release of curcumin loaded CSNHMA NPs at pH 5.0 compared to physiological pH.

Stimuli-Free Transcuticular Delivery of Zn Microelement Using Biopolymeric Nanovehicles: Experimental, Theoretical, and In Planta Studies

This paper reports one-step synthesis of polysaccharide-based nanovehicles, capable of transporting ionic zinc via plant cuticle without auxiliary stimulation. Delivery of highly hydrophilic nutritive microelements via the hydrophobic cuticle of plant foliage is one of the major challenges in modern agriculture. In traditional nutrition via roots, up to 80% of microelements permeate to soil and get wasted; therefore, foliar treatment is an environmentally and economically preferable alternative. Carboxymethyl cellulose (CMC) was modified to amphiphilic N-octylamide-derivative (CMC-8), which spontaneously self-assemble to nanovehicles. It was found that hydrophobic substituents endow a biopolymer with unexpected affinity toward a hydrophilic payload. CMC-8 nanovehicles effectively encapsulated ionic zinc (ZnSO₄) and delivered it upon foliar application to pepper (Capsicum annuum) and tomato (Solanum lycopersicum) plants. Zinc uptake and translocation in plants were monitored by SEM-EDS and fluorescence microscopic methods. In planta monitoring of the carrier was done by labeling nanovehicles with fluorescent carbon dots. Three-dimensional (3-D) structural modeling and conformational dynamics explained the CMC-8 self-assembly mechanism and zinc coordination phenomenon upon introduction of hydrophobic substituents.

Micelle nanovehicles for co-delivery of Lepidium meyenii Walp. (maca) polysaccharide and chloroquine to tumor-associated macrophages for synergistic cancer immunotherapy

Here, we fabricated amphiphilic polysaccharide micelles for synergistic cancer immunotherapy targeting tumor-associated macrophages (TAMs). Lepidium meyenii Walp. (maca) polysaccharide (MP), a naturally derived macromolecule with a strong TAM-remodeling effect, was grafted on a hydrophobic poly(lactic-co-glycolic acid) (PLGA) segment, with a disulfide bond for redox-sensitive linkage. The amphiphilic polysaccharide derivatives could self-assemble into core (PLGA)-shell (MP)-structured micelles and encapsulate chloroquine (CQ) into the hydrophobic core. By using a 4T1-M2 macrophage co-culture model and a 4T1 tumor xenograft mouse model, we showed that the prepared micelles could co-deliver MP and CQ to the tumor sites and selectively accumulate at TAMs because of the specific properties of MP. Furthermore, the nanoparticles exerted synergistic tumor immunotherapeutic and antimetastatic effects, which might be attributable to the enhanced cell internalization of the micelles and the multiple regulatory mechanisms of MP and CQ. Thus, immunomodulatory MP may be a promising biomaterial for cancer immunotherapy.

Multiple-therapy strategies via polysaccharides-based nano-systems in fighting cancer

Polysaccharide-based biomaterials (e.g., chitosan, dextran, hyaluronic acid, chondroitin sulfate and heparin) have received great attention in healthcare, particularly in drug delivery for tumor therapy. They are naturally abundant and available, outstandingly biodegradable and biocompatible, and they generally have negligible toxicity and low immunogenicity. In addition, they are easily chemically or physically modified. Therefore, PSs-based nanoparticles (NPs) have been extensively investigated for the enhancement of tumor treatment. In this review, we introduce the synthetic pathways of amphiphilic PS derivatives, which allow the constructs to self-assemble into NPs with various structures. We especially offer an overview of the emerging applications of self-assembled PSs-based NPs in tumor chemotherapy, photothermal therapy (PTT), photodynamic therapy (PDT), gene therapy and immunotherapy. We believe that this review can provide criteria for a rational and molecular level-based design of PS-based NPs, and comprehensive insight into the potential of PS-based NPs used in multiple cancer therapies.

Dual responsive dextran-graft-poly (N-isopropylacrylamide)/doxorubicin prodrug via Schiff base reaction

Stimulus-responsive nanoparticles stand out in studies for cancer treatment since these systems can promote a selective release of the drug in tumor tissues and cells, minimizing the effects caused by conventional chemotherapy. Dextran-graft-poly (N-isopropylacrylamide) copolymers were synthesized via Schiff base formation. The synthesis of copolymers was confirmed by Fourier transform infrared spectroscopy (FTIR) and proton nuclear magnetic resonance (NMR) and the analyses of dynamic light scattering (DLS) showed that the copolymers were thermal and pH dual-responsive. The chemotherapy drug doxorubicin (DOX) was conjugated to the copolymers via Schiff base formation, obtaining nanoparticles by self-assembling with size smaller than 130 nm. A higher percentage of doxorubicin was released at pH 5.0 (59.1 ± 2.1%) compared to physiological pH (34.9 ± 4.8%), confirming a pH-sensitive release profile. The in vitro cytotoxicity assay demonstrated that DOX-loaded nanoparticles can inhibit cancer cell proliferation and promote reduced cytotoxicity in non-tumor cells. The D_45kP_30k-DOX nanoparticles induced morphological changes in HCT-116 cells suggesting cell death and the cell uptake assay indicated that the nanoparticles can be internalized by endocytosis. Therefore, DOX-loaded nanoparticles exhibited potential as smart systems for cancer treatment.

Enzymatic synthesis of amphiphilic carbohydrate esters: Influence of physicochemical and biochemical parameters

Glycolipids, carbohydrate fatty esters or sugar esters are amphiphilic molecules containing hydrophilic groups bonded to hydrophobic parent structures. Recently, glycolipids have shown their antimicrobial and antitumor capacities. Their surface activity properties have applications in the food, pharmaceutical and cosmetic industries. Sugar esters' building blocks can be obtained from natural resources and/or be transformed by biochemical pathways for uses as surfactants. Biosurfactants are non-ionic, nontoxic, biodegradable, tasteless, and odourless. The biocatalysis of these molecules involves sustainable, green, and safer methods. The advantages of producing biosurfactants from enzymatic catalysis are the energy economy, high selectivity, production of natural products, reduction of the use of fossil-based solvents and chloride compounds. This review presents the most recent studies concerning the evaluation of the impact of the main parameters and their levels influencing the enzymatic synthesis of glycolipids. Various enzyme catalysed synthetic methods were described. The parameters studied were temperature, reaction time, solvent system, type of biocatalyst, substrates molar ratio proportion and the nature of substrates. This review discusses the influence of different biocatalysts in the conversions of glycolipids; The reactivity from mono to polysaccharides and their interaction with fatty acids of different carbon chain lengths in the presence of specific enzymes; The effect of the solvent polarity, the use of multiple solvents, ionic liquids, supercritical CO₂, and solvent-free media in sugar ester conversions; And the optimization of temperature and reaction time in different enzymatic systems.

Recent Advances in Nanomicelles Delivery Systems

The efficient and selective delivery of therapeutic drugs to the target site remains the main obstacle in the development of new drugs and therapeutic interventions. Up until today, nanomicelles have shown their prospective as nanocarriers for drug delivery owing to their small size, good biocompatibility, and capacity to effectively entrap lipophilic drugs in their core. Nanomicelles are formed via self-assembly in aqueous media of amphiphilic molecules into well-organized supramolecular structures. Molecular weights and structure of the core and corona forming blocks are important properties that will determine the size of nanomicelles and their shape. Selective delivery is achieved via novel design of various stimuli-responsive nanomicelles that release drugs based on endogenous or exogenous stimulations such as pH, temperature, ultrasound, light, redox potential, and others. This review summarizes the emerging micellar nanocarriers developed with various designs, their outstanding properties, and underlying principles that grant targeted and continuous drug delivery. Finally, future perspectives, and challenges for nanomicelles are discussed based on the current achievements and remaining issues.

Paula ML, M. de Moraes R, Alves GM, M. Lacerda T, dos Santos JC, M. dos Santos A, Medeiros SDF. Chemical Modification of Pullulan Exopolysaccharide by Grafting Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) via Click Chemistry

Biodegradable and biocompatible copolymers have been often studied for the development of biomaterials for drug delivery systems. In this context, this work reports the synthesis and characterization of a novel pullulan-g-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (Pull-g-PHBHV) graft copolymer using click chemistry. Well-defined and functional pullulan backbones containing azide groups (PullN₃) previously prepared by our group were successfully used for this purpose and propargyl-terminated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was prepared via transesterification using propargyl alcohol as a chain transfer agent. By an alkyne-azide cycloaddition reaction catalyzed by copper (Cu (I)) (CuAAC), the graft copolymer Pull-g-PHBHV was obtained. The chemical structures of the polymers were accessed by ¹H NMR and ¹³C NMR FTIR. Disappearance of the bands referring to the main bonds evidenced success in the grafting reaction. Besides that, DRX, DSC and TGA were used in order to access the changes in crystallinity and thermal behavior of the material. The remaining crystallinity of the Pull-g-PHBHV structure evidences the presence of PHBHV. Pull-g-PHBHV presented lower degradation maximum temperature values than the starting materials, indicating its minor thermal stability. Finally, the synthesized material is an innovative biopolymer, which has never been reported in the previous literature. It is a bio-derived and biodegradable polymer, chemically modified, resulting in interesting properties which can be useful for their further applications as biomedical systems for controlled delivery, for example.

Electrohydrodynamic Sprayable Amphiphilic Polysaccharide-Clasped Nanoscale Self-Assembly for In Vivo Imaging

The work presented in this report demonstrates that amphiphilic polysaccharide-clasped self-assembly (Amp-SA) with nanometer size, encapsulating hydrophobic nanoparticles (NPs) can be generated via electrohydrodynamic spraying. It is observed that the formation of hydrophobic NP-encapsulated Amp-SA is dependent on the surface chemistry of NPs. The citrate-coated magnetic NPs (MNPs-Cit) were also prepared and compared. The hydrophobic magnetic NP-encapsulated Amp-SA (Amp-SA-M) exhibited around 2.7-2.8-fold higher values in r₂ relaxivity than that of MNPs-Cit. In addition, the resulting Amp-SA-M achieved ∼17.2-fold higher values in r₂/r₁ ratios than MNPs-Cit. The enhanced performances in magnetic transverse (r₂) relaxivity and r₂/r₁ ratio as well as the in vivo behavior of Amp-SA-M suggest the potential of Amp-SA-M as a promising MRI nanoprobe. This approach based on the nature-originated amphiphilic biopolymers may provide a novel insight into electrohydrodynamic techniques that have the ability to create various nanostructures, encapsulating high-quality hydrophobic nanomaterials for applications in diverse biotechnology.

Fabrication of oxidized bacterial cellulose by nitrogen dioxide in chloroform/cyclohexane as a highly loaded drug carrier for sustained release of cisplatin

Carboxylated bacterial cellulose (OBC) was fabricated by oxidation with nitrogen dioxide in chloroform/cyclohexane and employed as a carrier for sustained release of antitumor substance cisplatin (CDDP). The influence of removing water method, solvent used in the synthesis, concentration of N₂O₄, and duration of the oxidation on content of carboxyl groups in reaction products was established. Due to the possibility of nitrogen dioxide to penetrate into cellulose crystallites, the carboxyl group content of the OBC reaches high values up to 4 mmol/g. In vitro degradation of OBC was determined under simulated physiological conditions. The immobilization of CDDP on OBC was studied in detail. The initial burst release of the drug from the polymer was depressed. The cytotoxicity of CDDP-loaded OBC was evaluated with HeLa cells. The unique structure and properties of OBC make it a great candidate as drug delivery carrier.

Mucoadhesive cholesterol-chitosan self-assembled particles for topical ocular delivery of dexamethasone

The topical application of ophthalmic drugs is a convenient and safe mode of drug administration. However, the bioavailability of topical drugs in the eye is low due to eye barriers and the rapid removal of the drug from the conjunctival surface by the tear fluid. The aim of this study was to obtain dexamethasone-loaded mucoadhesive self-assembled particles based on a conjugate of succinyl cholesterol with chitosan (SC-CS) for potential use as a topical ocular formulation. SC-CS was obtained via a carbodiimide-mediated coupling reaction (degree of substitution DS 1.2-5.8%). SC-CS in the DS range of 1.2-3.0% can self-organize in solution to form positively charged particles (ζ-potential 20-37 mV) of submicron size (hydrodynamic diameter 700-900 nm). The SC-CS particles show good mucoadhesiveness, which decreases with increasing DS. The obtained particles can encapsulate 159-170 μg/mg dexamethasone; they release about 50% of drug in 2 h, and the cumulative drug release reached 95% in 24 h. A cell model confirmed that dexamethasone-loaded SC-CS particles are non-cytotoxic and exhibit a comparable anti-inflammatory activity to that of pure dexamethasone. Testing the osmotic resistance of erythrocytes showed that both dexamethasone-loaded and non-loaded SC-CS particles have greater membrane-stabilizing ability than that of dexamethasone.

O-Carboxymethyl chitosan-based pH-responsive amphiphilic chitosan derivatives: Characterization, aggregation behavior, and application

Chitosan has attracted much attention in drug delivery, however, carboxymethyl chitosan (CMC)-based self-aggregated nanocarriers are seldom reported. In this paper, two kinds of CMC-based pH-responsive amphiphilic chitosan derivatives, N-2-hydroxylpropyl-3-butyl ether-O-carboxymethyl chitosan (HBCC) and N-2-hydroxylpropyl-3-(2-ethylhexyl glycidyl ether)-O-carboxymethyl chitosan (H2ECC), have been synthesized by the homogeneous reaction. The molecular structures were characterized by FTIR, ¹H NMR and ¹³C NMR. The optimum reaction condition was obtained based on the data of ¹H NMR spectrum: reaction time of 4 h, reaction temperature of 80 °C and n_epoxyn_-NH2 of 3/1, respectively. The XRD patterns showed the crystallinity of HBCC and H2ECC decreased due to the introduction of hydrophobic segments. The thermostability of HBCC and H2ECC was improved for the formation of heat-resistant stereo-complexed structures. The intermolecular hydrophobic interaction hindered the intermolecular mobility by increasing glass transition temperature of ca. 10 °C. Both HBCC and H2ECC have very low critical aggregation concentrations (HBCC: 0.66-1.56 g/L, H2ECC: 0.57-1.07 g/L) and moderate aggregate particle size, which is advantageous for utilization as a drug carrier. The curcumin loaded HBCC and H2ECC aggregates showed nontoxicity, meanwhile, HBCC and H2ECC showed good antibacterial activity against Staphylococcus aureus and Escherichia coli. As a result of these two favorable properties, HBCC and H2ECC could be used as curcumin nanocarriers as well as antibacterial agents.

Nanoconjugation and Encapsulation Strategies for Improving Drug Delivery and Therapeutic Efficacy of Poorly Water-Soluble Drugs

Nanoconjugations have been demonstrated to be a dominant strategy for drug delivery and biomedical applications. In this review, we intend to describe several strategies for drug formulation, especially to improve the bioavailability of poorly water-soluble molecules for future application in the therapy of numerous diseases. The context of current studies will give readers an overview of the conjugation strategies for fabricating nanoparticles, which have expanded from conjugated materials to the surface conjugation of nanovehicles. Moreover, nanoconjugates for theranostics are also discussed and highlighted. Overall, these state-of-the-art conjugation methods and these techniques and applications for nanoparticulate systems of poorly water-soluble drugs will inspire scientists to explore and discover more productive techniques and methodologies for drug development.

A journey through the emergence of nanomedicines with poly(alkylcyanoacrylate) based nanoparticles

Starting in the late 1970s, the pioneering work of Patrick Couvreur gave birth to the first biodegradable nanoparticles composed of a biodegradable synthetic polymer. These nanoparticles, made of poly(alkylcyanoacrylate) (PACA), were the first synthetic polymer-based nanoparticulate drug carriers undergoing a phase III clinical trial so far. Analyzing the journey from the birth of PACA nanoparticles to their clinical evaluation, this paper highlights their remarkable adaptability to bypass various drug delivery challenges found on the way. At present, PACA nanoparticles include a wide range of nanoparticles that can associate drugs of different chemical nature and can be administered in vivo by different routes. The most recent technologies giving the nanoparticles customised functions could also be implemented on this family of nanoparticles. Through different examples, this paper discusses the seminal role of the PACA nanoparticles' family in the development of nanomedicines.

Development of redox-responsive theranostic nanoparticles for near-infrared fluorescence imaging-guided photodynamic/chemotherapy of tumor

The development of imaging-guided smart drug delivery systems for combinational photodynamic/chemotherapy of the tumor has become highly demanded in oncology. Herein, redox-responsive theranostic polymeric nanoparticles (NPs) were fabricated innovatively using low molecular weight heparin (LWMH) as the backbone. Chlorin e6 (Ce6) and alpha-tocopherol succinate (TOS) were conjugated to LMWH via cystamine as the redox-sensitive linker, forming amphiphilic Ce6-LMWH-TOS (CHT) polymer, which could self-assemble into NPs in water and encapsulate paclitaxel (PTX) inside the inner core (PTX/CHT NPs). The enhanced near-infrared (NIR) fluorescence intensity and reactive oxygen species (ROS) generation of Ce6 were observed in a reductive environment, suggesting the cystamine-switched "ON/OFF" of Ce6. Also, the in vitro release of PTX exhibited a redox-triggered profile. MCF-7 cells showed a dramatically higher uptake of Ce6 delivered by CHT NPs compared with free Ce6. The improved therapeutic effect of PTX/CHT NPs compared with mono-photodynamic or mono-chemotherapy was observed in vitro via MTT and apoptosis assays. Also, the PTX/CHT NPs exhibited a significantly better in anti-tumor efficiency upon NIR irradiation according to the results of in vivo combination therapy conducted on 4T1-tumor-bearing mice. The in vivo NIR fluorescence capacity of CHT NPs was also evaluated in tumor-bearing nude mice, implying that the CHT NPs could enhance the accumulation and retention of Ce6 in tumor foci compared with free Ce6. Interestingly, the anti-metastasis activity of CHT NPs was observed against MCF-7 cells by a wound healing assay, which was comparable to LMWH, suggesting LMWH was promising for construction of nanocarriers for cancer management.

Novel pH-responsive and self-assembled nanoparticles based on Bletilla striata polysaccharide: preparation and characterization

In this investigation, innovative pH-sensitive and amphiphilic nanoparticles (NPs) were synthesized by grafting histidine (His, pH sensitive molecule) and stearic acid (SA, hydrophobic segment) onto the polysaccharides of Bletilla striata (BSP). The His-SA-BSP was able to self-assemble into NPs with pH sensitivity. The acidic conditions could trigger the imidazole ionization and reverse the surface charge, while the electrostatic repulsion wrecked the structure and drove the NPs to a swollen state, as revealed by dynamic light scattering (DLS), transmission electron microscopy (TEM), and critical micelle concentration (CMC) analyses. By increasing the degree of substitution (DS) of His, the NPs showed improved pH sensitivity. The NPs could accelerate Doxorubicin (Dox) release to a remarkably greater extent (3-fold) at pH 5 than at pH 7.4. The CCK-8 assay demonstrated a good biocompatibility of the NPs towards different cell lines and a specific inhibition effect of Dox-loaded NPs against tumor cells. Furthermore, the NPs showed the improved cellular uptake of Dox towards MCF-7 by fluorescence microscopy and flow cytometry. Therefore, the new His-SA-BSP showed potential applications in drug nanocarrier systems.

In this investigation, innovative pH-sensitive and amphiphilic nanoparticles (NPs) were synthesized by grafting histidine (His, pH sensitive molecule) and stearic acid (SA, hydrophobic segment) onto the polysaccharides of Bletilla striata (BSP).