Oral hydrophilic matrices having non uniform drug distribution for zero-order release: A literature review

Organ-Retentive Osmotically Driven System (ORODS): A Novel Expandable Platform for in Situ Drug Delivery

Drug delivery systems capable of being retained within hollow organs allow the entire drug dose to be delivered locally to the disease site or to absorption windows for improved systemic bioavailability. A novel Organ-Retentive Osmotically Driven System (ORODS) was here proposed, obtained by assembling drug-containing units having prolonged release kinetics with osmotic units used as increasing volume compartments. Particularly, prototypes having H-shape design were conceived, manufactured and evaluated. Such devices were assembled by manually inserting a tube made of regenerated cellulose (osmotic unit) into the holes of two perforated hydrophilic tableted matrices containing paracetamol as a tracer drug. The osmotic unit was obtained by folding and gluing a plain regenerated cellulose membrane and loading sodium chloride inside. When immersed in aqueous fluids, this compartment expanded to approximately 80% of its maximum volume within 30 min of testing, and a plateau was maintained for about 6 h. Subsequently, it slowly shrank to approximately 20% of the maximum volume in 24 h, which would allow for physiological emptying of the device from hollow organs. While expanding, the osmotic unit acquired stiffness. Drug release from H-shaped ORODSs conveyed in hard-gelatin capsules was shown to be prolonged for more than 24 h.

Time-Based Formulation Strategies for Colon Drug Delivery

Despite poor absorption properties, delivery to the colon of bioactive compounds administered by the oral route has become a focus of pharmaceutical research over the last few decades. In particular, the high prevalence of Inflammatory Bowel Disease has driven interest because of the need for improved pharmacological treatments, which may provide high local drug concentrations and low systemic exposure. Colonic release has also been explored to deliver orally biologics having gut stability and permeability issues. For colon delivery, various technologies have been proposed, among which time-dependent systems rely on relatively constant small intestine transit time. Drug delivery platforms exploiting this physiological feature provide a lag time programmed to cover the entire small intestine transit and control the onset of release. Functional polymer coatings or capsule plugs are mainly used for this purpose, working through different mechanisms, such as swelling, dissolution/erosion, rupturing and/or increasing permeability, all activated by aqueous fluids. In addition, enteric coating is generally required to protect time-controlled formulations during their stay in the stomach and rule out the influence of variable gastric emptying. In this review, the rationale and main delivery technologies for oral colon delivery based on the time-dependent strategy are presented and discussed.

3D Printed Fractal-like Structures with High Percentage of Drug for Zero-Order Colonic Release

Colonic drug delivery of drugs is an area of great interest due to the need to treat high prevalence colonic local diseases as well as systemic conditions that may benefit from the advantages associated to this route of drug administration. In the last decade, the use of 3D printing technologies has expanded, offering the possibility of preparing personalized medicines in small batches directly at the point of care. The aim of this work is to design a high drug loaded 3D printed system prepared by a combination of Fused Deposition Modelling (FDM) and Injection Volume Filling (IVF) techniques intended for zero-order colonic drug release. For this purpose, different batches of binary and ternary filaments based on the thermoplastic polyurethane Tecoflex EG-72D (TPU), theophylline anhydrous (AT) as model drug, and magnesium stearate as lubricant have been developed and characterized. Filaments with the highest drug load and the best rheological properties were selected for the manufacture of a printed fractal-like structure based on multiple toroids. This design was proposed to provide high surface area, leading to increased drug release and water uptake in the colonic region. This structure was 3D printed by FDM and then coated in a unique step by IVF technology using the enteric polymer DrugCoat S 12.5. This way, an additional coating process is avoided, reducing costs and production time. Studies of drug release confirmed the ability of the structures to provide a five-hour period of constant drug delivery in the colonic region.

Cellulase as an "active" excipient in prolonged-release HPMC matrices: A novel strategy towards zero-order release kinetics

Hydrophilic matrices are of utmost interest for oral prolonged release of drugs. However, they show decreasing release rate over time, mainly due to lengthening of the diffusional pathway across the gel formed upon glass-rubber transition of the polymer. Therefore, achievement of zero-order release kinetics, which could reflect in constant drug plasma levels, is still an open issue. With the aim of improving the release performance of hydroxypropyl methylcellulose (HPMC) systems, the use of cellulolytic enzymes was proposed to aid erosion of the swollen matrix, thereby counteracting the release rate decrease particularly toward the end of the process. The effectiveness of this strategy was evaluated by studying the mass loss and drug tracer release from tableted matrices consisting of high-viscosity HPMC (Methocel® K4M), Acetaminophen and increasing amounts (0.5-10% on HPMC) of a cellulolytic product (Sternzym® C13030). A faster erosion and progressive shift to linearity of the overall release profiles were observed as a function of the enzyme concentration. Release was markedly linear from matrices containing 5 and 10% Sternzym® C13030. In partially coated matrices with these cellulase concentrations, such results were in agreement with data of erosion and swelling front movement, which exhibited early and long-lasting synchronization.

Multiple variable effects in the customisation of fused deposition modelling 3D-printed medicines: A design of experiments (DoE) approach

Fused deposition modelling (FDM) is the most explored three-dimensional (3D) printing technique in pharmaceutics. However, there is still a lack of knowledge about the factors influencing the properties of the printed forms. Here, the main and combined effects of the presence of a pore former (mannitol, 0% or 10%), the infill percentage (50% or 100%) and the drug percentage (5% or 10%) on the pharmaceutical properties of 3D-printed forms were evaluated by a design of experiments (DoE) approach. Poly(Ɛ-caprolactone) filaments were produced by hot-melt extrusion and dexamethasone was used as a hydrophobic model drug. The 2³ factorial design afforded eight formulations printed at 105 °C. The drug content ranged from 9.87 to 25.59 mg/unit, depending on the drug and infill percentages. The drug release profiles followed the Higuchi model. The infill percentage modulated the drug release rate, whereas the pore former had a combined effect on this parameter, depending on the drug and infill percentage levels. According to the DoE data, besides the changes in the infill percentage, the addition of a pore former can also tailor the drug release rate from 3D-printed solid forms. These findings may assist the development of personalised tumour implants by 3D printing.