Applications and prospects of intra-articular drug delivery system in arthritis therapeutics

Application of Injectable Hydrogels as Delivery Systems in Osteoarthritis and Rheumatoid Arthritis

Osteoarthritis and rheumatoid arthritis, though etiologically distinct, are both inflammatory joint diseases that cause progressive joint injury, chronic pain, and loss of function. Therefore, long-term treatment with a focus on relieving symptoms is needed. At present, the primary treatment for arthritis is drug therapy, both oral and intravenous. Although significant progress has been achieved for these treatment methods in alleviating symptoms, certain prominent drawbacks such as the substantial side effects and limited absorption of medications call for an urgent need for improved drug delivery methods. Injected hydrogels can be used as a delivery system to deliver drugs to the joint cavity in a controlled manner and continuously release them, thereby enhancing drug retention in the joint cavity to improve therapeutic effectiveness, which is attributed to the desirable attributes of the delivery system such as low immunogenicity, good biodegradability and biocompatibility. This review summarizes the types of injectable hydrogels and analyzes their applications as delivery systems in arthritis treatment. We also explored how hydrogels counteract inflammation, bone and cartilage degradation, and oxidative stress, while promoting joint cartilage regeneration in the treatment of osteoarthritis (OA) and rheumatoid arthritis (RA). This review also highlights new approaches to developing injectable hydrogels as delivery systems for OA and RA.

Long-acting bulleyaconitine A microspheres via intra-articular delivery for multidimensional therapy of rheumatoid arthritis

Bulleyaconitine A (BLA) is a promising candidate for treating rheumatoid arthritis (RA) with diverse pharmacological activities, including anti-inflammatory, analgesic and bone repair. Herein, the long-acting bulleyaconitine A microspheres (BLA-MS) were developed to treat RA comprehensively by forming drug reservoirs in joint cavities. The BLA-MS were prepared by emulsion/solvent evaporation method. The particle size and distribution were assessed by SEM. The crystalline state was investigated by DSC and PXRD. The drug loading (DL), encapsulation efficiency (EE) and cumulative release in vitro were determined by HPLC. The DL and EE were 23.93 ± 0.38 % and 95.73 ± 1.56 % respectively, and the cumulative release was up to 69 days with a stable release curve. The pharmacodynamic results in collagen induced arthritis (CIA) rats showed a noticeable reduction in paw thickness (5.66 ± 0.32 mm), and the decreasing expression level of PGE2, TNF-α and IL-6 which diminished the infiltration of inflammatory cells, thereby alleviating the progression of erosion and repairing the damaged bones (BV/TV (Bone Volume / Total Volume): 81.97 %, BS/BV (Bone Surface / Bone Volume): 6.08 mm-1). In conclusion, intra-articular injection of BLA-MS should have a promising application in the treatment of RA and may achieve clinical transformation in the future.

Intra-articular hydrogel formulation prolongs the in vivo stability of Toll-like receptor antagonistic peptides for rheumatoid arthritis treatment

Rheumatoid arthritis (RA) is an autoimmune disease characterized by systemic inflammation that primarily affects joint tissue and requires frequent medication. Recently, we developed cyclic phage-display-derived inhibitory peptides (CPs), which act as Toll-like Receptor 4 antagonists. These CPs exhibited therapeutic efficacy against joint diseases by alleviating inflammatory factors. Nonetheless, CP exhibits in vivo instability and a short half-life. Therefore, this study sought to improve the in vivo stability of CP, thereby reducing the frequency of CP administration through the development of an injectable hydrogel depot formulation. To improve in vivo stability, CP was chemically conjugated to hyaluronic acid (HA-CP) and subsequently mixed into a temperature-sensitive hydrogel [methoxy polyethylene glycol-b-poly(ε-caprolactone)-ran-poly(lactide) (PC)] as an injectable depot (PC+(HA-CP)). For comparison, CP was physically mixed with HA and PC (PC+(HA+CP)). Both PC+(HA-CP) and PC+(HA+CP) were found to rapidly form depots upon injection into the joint space. Cell viability assays confirmed the non-toxic nature of PC+(HA-CP) and PC+(HA+CP), whereas both formulations exhibited inhibition of inflammatory factors. Furthermore, PC+(HA-CP) retained CP for a longer duration compared to PC+(HA+CP) in the presence of hyaluronidase and within the RA joint space. Following intra-articular injection, both the PC+(HA-CP) and PC+(HA+CP) depots exhibited reductions in RA symptoms, cartilage regeneration, and suppression of pro-inflammatory cytokine levels. Specifically, by extending the in vivo retention of CP, PC+(HA-CP) demonstrated superior RA treatment efficacy compared to PC+(HA+CP). In conclusion, intra-articular injection of PC+(HA-CP) was validated as an effective strategy for treating RA, owing to its ability to prolong the in vivo retention of CP. This approach holds promise for improving RA management and patient outcomes.

Logic-Based Strategy for Spatiotemporal Release of Dual Extracellular Vesicles in Osteoarthritis Treatment

To effectively treat osteoarthritis (OA), the existing inflammation must be reduced before the cartilage damage can be repaired; this cannot be achieved with a single type of extracellular vesicles (EVs). Here, a hydrogel complex with logic-gates function is proposed that can spatiotemporally controlled release two types of EVs: interleukin 10 (IL-10)+ EVs to promote M2 polarization of macrophage, and SRY-box transcription factor 9 (SOX9)+ EVs to increase cartilage matrix synthesis. Following dose-of-action screening, the dual EVs are loaded into a matrix metalloporoteinase 13 (MMP13)-sensitive self-assembled peptide hydrogel (KM13E) and polyethylene glycol diacrylate/gelatin methacryloyl-hydrogel microspheres (PGE), respectively. These materials are mixed to form a "microspheres-in-gel" KM13E@PGE system. In vitro, KM13E@PGE abruptly released IL-10+ EVs after 3 days and slowly released SOX9+ EVs for more than 30 days. In vivo, KM13E@PGE increased the CD206+ M2 macrophage proportion in the synovial tissue and decreased the tumor necrosis factor-α and IL-1β levels. The aggrecan and SOX9 expressions in the cartilage tissues are significantly elevated following inflammation subsidence. This performance is not achieved using anti-inflammatory or cartilage repair therapy alone. The present study provides an injectable, integrated delivery system with spatiotemporal control release of dual EVs, and may inspire logic-gates strategies for OA treatment.

On-demand release of a selective MMP-13 blocker from an enzyme-responsive injectable hydrogel protects cartilage from degenerative progression in osteoarthritis

In osteoarthritis (OA), the degradation of cartilage is primarily driven by matrix metalloprotease-13 (MMP-13). Hence, the inhibition of MMP-13 has emerged as an attractive target for OA treatment. Among the various approaches that are being explored for MMP-13 regulation, blocking of the enzyme with specific binding molecules appears to be a more promising strategy for preventing cartilage degeneration. To enhance effectiveness and ensure patient compliance, it is preferable for the binding molecule to exhibit sustained activity when administered directly into the joint. Herein, we present an enzyme-responsive hydrogel that was designed to exhibit on-demand, the sustained release of BI-4394, a potent and highly selective MMP-13 blocker. The stable and compatible hydrogel was prepared using triglycerol monostearate. The efficacy of the hydrogel to prevent cartilage damage was assessed in a rat model of OA induced by anterior cruciate ligament transection (ACLT). The results revealed that in comparison to the rats administrated weekly with intra-articular BI-4394, the hydrogel implanted rats had reduced levels of inflammation and bone erosion. In comparison to untreated control, the cartilage in animals administered with BI-4394/hydrogel exhibited significant levels of collagen-2 and aggrecan along with reduced MMP-13. Overall, this study confirmed the potential of BI-4394 delivery using an enzyme-responsive hydrogel as a promising treatment option to treat the early stages of OA by preventing further cartilage degradation.

Nano-Micron Combined Hydrogel Microspheres: Novel Answer for Minimal Invasive Biomedical Applications

Hydrogels, key in biomedical research for their hydrophilicity and versatility, have evolved with hydrogel microspheres (HMs) of micron-scale dimensions, enhancing their role in minimally invasive therapeutic delivery, tissue repair, and regeneration. The recent emergence of nanomaterials has ushered in a revolutionary transformation in the biomedical field, which demonstrates tremendous potential in targeted therapies, biological imaging, and disease diagnostics. Consequently, the integration of advanced nanotechnology promises to trigger a new revolution in the realm of hydrogels. HMs loaded with nanomaterials combine the advantages of both hydrogels and nanomaterials, which enables multifaceted functionalities such as efficient drug delivery, sustained release, targeted therapy, biological lubrication, biochemical detection, medical imaging, biosensing monitoring, and micro-robotics. Here, this review comprehensively expounds upon commonly used nanomaterials and their classifications. Then, it provides comprehensive insights into the raw materials and preparation methods of HMs. Besides, the common strategies employed to achieve nano-micron combinations are summarized, and the latest applications of these advanced nano-micron combined HMs in the biomedical field are elucidated. Finally, valuable insights into the future design and development of nano-micron combined HMs are provided.

Cyaonoside A-loaded composite hydrogel microspheres to treat osteoarthritis by relieving chondrocyte inflammation

Cyaonoside A (CyA), derived from the natural Chinese medicine, Cyathula officinalis Kuan, which was for a long time used to treat knee injuries and relieve joint pain in traditional Chinese medicine, showed an unclear mechanism for protecting cartilage. In addition, CyA was poorly hydrosoluble and incapable of being injected directly into the joint cavity, which limited its clinical application. This study reveals that CyA resisted IL-1β-mediated chondrogenic inflammation and apoptosis. Next, transcriptome sequencing is used to explore the potential mechanisms underlying CyA regulation of MSC chondrogenic differentiation. Based on these findings, CyA-loaded composite hydrogel microspheres (HLC) were developed and they possessed satisfactory loading efficiency, a suitable degradation rate and good biocompatibility. HLC increased chondrogenic anabolic gene (Acan, COL2A, and SOX9) expression, while downregulating the expression of the catabolic marker MMP13 in vitro. In the osteoarthritis mouse model, HLC demonstrated promising therapeutic capabilities by protecting the integrity of articular cartilage. In conclusion, this study provides insights into the regulatory mechanisms of CyA for chondrocytes and proposes a composite hydrogel microsphere-based advanced therapeutic strategy for osteoarthritis.

A review of hyaluronic acid-based therapeutics for the treatment and management of arthritis

Hyaluronic acid (HA), a biodegradable, biocompatible and non-immunogenic therapeutic polymer is a key component of the cartilage extracellular matrix (ECM) and has been widely used to manage two major types of arthritis, osteoarthritis (OA) and rheumatoid arthritis (RA). OA joints are characterized by lower concentrations of depolymerized (low molecular weight) HA, resulting in reduced physiological viscoelasticity, while in RA, the associated immune cells are over-expressed with various cell surface receptors such as CD44. Due to HA's inherent viscoelastic property and its ability to target CD44, there has been a surge of interest in developing HA-based systems to deliver various bioactives (drugs and biologics) and manage arthritis. Considering therapeutic benefits of HA in arthritis management and potential advantages of novel delivery systems, bioactive delivery through HA-based systems is beginning to display improved outcomes over bioactive only treatment. The benefits include enhanced bioactive uptake due to receptor-mediated targeting, prolonged retention of bioactives in the synovium, reduced expressions of proinflammatory mediators, enhanced cartilage regeneration, reduced drug toxicity due to sustained release, and improved and cost-effective treatment. This review provides an underlying rationale to prepare and use HA-based bioactive delivery systems for arthritis applications. With special emphasis given to preclinical/clinical results, this article reviews various bioactive-loaded HA-based particulate carriers (organic and inorganic), gels, scaffolds and polymer-drug conjugates that have been reported to treat and manage OA and RA. Furthermore, the review identifies several key challenges and provides valuable suggestions to address them. Various developments, strategies and suggestions described in this review may guide the formulation scientists to optimize HA-based bioactive delivery systems as an effective approach to manage and treat arthritis effectively.

Reproducible Synthesis of Biocompatible Albumin Nanoparticles Designed for Intra-articular Administration of Celecoxib to Treat Osteoarthritis

Osteoarthritis (OA) is the most common form of arthritis, with intra-articular (IA) delivery of therapeutics being the current best option to treat pain and inflammation. However, IA delivery is challenging due to the rapid clearance of therapeutics from the joint and the need for repeated injections. Thus, there is a need for long-acting delivery systems that increase the drug retention time in joints with the capacity to penetrate OA cartilage. As pharmaceutical utility also demands that this is achieved using biocompatible materials that provide colloidal stability, our aim was to develop a nanoparticle (NP) delivery system loaded with the COX-2 inhibitor celecoxib that can meet these criteria. We devised a reproducible and economical method to synthesize the colloidally stable albumin NPs loaded with celecoxib without the use of any of the following conditions: high temperatures at which albumin denaturation occurs, polymer coatings, oils, Class 1/2 solvents, and chemical protein cross-linkers. The spherical NP suspensions were biocompatible, monodisperse with average diameters of 72 nm (ideal for OA cartilage penetration), and they were stable over 6 months at 4 °C. Moreover, the NPs loaded celecoxib at higher levels than those required for the therapeutic response in arthritic joints. For these reasons, they are the first of their kind. Labeled NPs were internalized by primary human articular chondrocytes cultured from the knee joints of OA patients. The NPs reduced the concentration of inflammatory mediator prostaglandin E2 released by the primaries, an indication of retained bioactivity following NP synthesis. Similar results were observed in lipopolysaccharide-stimulated human THP-1 monocytes. The IA administration of these NPs is expected to avoid side-effects associated with oral administration of celecoxib and to maintain a high local concentration in the knee joint over a sustained period. They are now ready for evaluation by IA administration in animal models of OA.

Can Combining Hyaluronic Acid and Physiotherapy in Knee Osteoarthritis Improve the Physicochemical Properties of Synovial Fluid?

Known as the degenerative disease of the knee with the highest prevalence, knee osteoarthritis (KOA) is characterized by a gradual destructive mechanism that, in severe cases, can provoke the need for total knee substitution. As the disease progresses, various enzymatic, immunological, and inflammatory processes abnormally degrade hyaluronic acid (HA), SF's main component, and affect the concentrations of specific proteins, with the final results seriously endangering synovial fluid (SF)'s rheological and tribological features and characteristics. No effective treatments have been found to stop the progression of KOA, but the injection of HA-based viscoelastic gels has been considered (alone or combined with physiotherapy (PT)) as an alternative to symptomatic therapies. In order to evaluate the effect of viscosupplementation and PT on the characteristics of SF, SF aspirated from groups treated for KOA (HA Kombihylan® and groups that received Kombihylan® and complex PT) was analyzed and compared from analytical, spectrophotometrical, and rheological perspectives. In the patients treated with PT, the SF extracted 6 weeks after viscosupplementation had a superior elastic modulus (G') and viscous moduli (G″), as well as a homogeneous distribution of proteins and polysaccharides. The viscosupplementation fluid improved the bioadhesive properties of the SF, and the use of the viscosupplementation fluid in conjunction with PT was found to be favorable for the distribution of macromolecules and phospholipids, contributing to the lubrication process and the treatment of OA-affected joints.

Articular Cartilage Regeneration via Induced Chondrocyte Autophagy by Sustained Release of Leptin Inhibitor from Thermo-Sensitive Hydrogel through STAT3/REDD1/mTORC1 Cascade

The pathophysiology of osteoarthritis (OA) is closely linked to autophagy abnormalities in articular chondrocytes, the sole mature cell type in healthy cartilage. Nevertheless, the precise molecular mechanism remains uncertain. Previous research has demonstrated that leptin activates mTORC1 , thereby inhibiting chondrocyte autophagy during the progression of OA. In this study, it is demonstrated that the presence of leptin induces a substantial increase in the expression of STAT3, leading to a notable decrease in REDD1 expression and subsequent phosphorylation of p70S6K, a recognized downstream effector of mTORC1. Conversely, inhibition of leptin yields contrasting effects. Additionally, the potential advantages of utilizing a sustained intra-articular release of a leptin inhibitor (LI) via an injectable, thermosensitive poly(D,L-lactide)-poly(ethylene glycol)-poly(D,L-lactide) (PDLLA-PEG-PDLLA: PLEL) hydrogel delivery system for the purpose of investigating its impact on cartilage repair are explored. The study conducted on LI-loaded PLEL (PLEL@LI) demonstrates remarkable efficacy in inhibiting OA and displays encouraging therapeutic advantages in the restoration of subchondral bone and cartilage. These findings establish a solid foundation for the advancement of a pioneering treatment approach utilizing PLEL@LI for OA.

Infliximab microencapsulation: an innovative approach for intra-articular administration of biologics in the management of rheumatoid arthritis-in vitro evaluation

Microencapsulation of the therapeutical monoclonal antibody infliximab (INF) was investigated as an innovative approach to improve its stability and to achieve formulations with convenient features for intra-articular administration. Ultrasonic atomization (UA), a novel alternative to microencapsulate labile drugs, was compared with the conventional emulsion/evaporation method (Em/Ev) using biodegradable polymers, specifically Polyactive® 1000PEOT70PBT30 [poly(ethylene-oxide-terephthalate)/poly(butylene-terephthalate); PEOT-PBT] and its polymeric blends with poly-(D, L-lactide-co-glycolide) (PLGA) RG502 and RG503 (PEOT-PBT:PLGA; 65:35). Six different formulations of spherical core-shell microcapsules were successfully developed and characterized. The UA method achieved a significantly higher encapsulation efficiency (69.7-80.25%) than Em/Ev (17.3-23.0%). Mean particle size, strongly determined by the microencapsulation method and to a lesser extent by polymeric composition, ranged from 26.6 to 49.9 µm for UA and 1.5-2.1 µm for Em/Ev. All formulations demonstrated sustained INF release in vitro for up to 24 days, with release rates modulated by polymeric composition and microencapsulation technique. Both methods preserved INF biological activity, with microencapsulated INF showing higher efficacy than commercial formulations at comparable doses regarding bioactive tumor necrosis factor-alpha (TNF-α) neutralization according to WEHI-13VAR bioassay. Microparticles' biocompatibility and extensive internalization by THP-1-derived macrophages was demonstrated. Furthermore, high in vitro anti-inflammatory activity was achieved after treatment of THP-1 cells with INF-loaded microcapsules, significatively reducing in vitro production of TNF-α and interleucine-6 (Il-6).

Enhanced intra-articular therapy for rheumatoid arthritis using click-crosslinked hyaluronic acid hydrogels loaded with toll-like receptor antagonizing peptides

Rheumatoid arthritis (RA) is a chronic inflammatory disorder that results in the deterioration of joint cartilage and bone. Toll-like receptor 4 (TLR4) has been pinpointed as a key factor in RA-related inflammation. While Toll-like receptor antagonizing peptide 2 (TAP2) holds potential as an anti-inflammatory agent, its in vivo degradation rate hinders its efficacy. We engineered depots of TAP2 encapsulated in click-crosslinked hyaluronic acid (TAP2+Cx-HA) for intra-articular administration, aiming to enhance the effectiveness of TAP2 as an anti-inflammatory agent within the joint cavity. Our data demonstrated that FI-TAP2+Cx-HA achieves a longer retention time in the joint cavity compared to FI-TAP2 alone. Mechanistically, we found that TAP2 interacts with TLR4 on the cell membranes of inflammatory cells, thereby inhibiting the nuclear translocation of NF-κB and maintaining it in an inactive cytoplasmic state. In a rat model of RA, the TAP2+Cx-HA formulation effectively downregulated the inflammatory cytokines TNF-α and IL-6, while upregulating the anti-inflammatory cytokine IL-10 and the therapeutic protein 14-3-3ζ. This led to a more rapid restoration of cartilage thickness, increased deposition of glycosaminoglycans, and new bone tissue formation in the regenerated cartilage, in comparison to a single TAP2 treatment after a six-week period. Our results suggest that TAP2+Cx-HA could serve as a potent intra-articular treatment for RA, offering both symptomatic relief and promoting cartilage regeneration. This innovative delivery system holds significant promise for improving the management of RA and other inflammatory joint conditions. STATEMENT OF SIGNIFICANCE: In this study, we developed a therapy by creating toll-like receptor 4 (TLR4)-antagonizing peptide (TAP2)-loaded click-crosslinked hyaluronic acid (TAP2+Cx-HA) depots for direct intra-articular injection. Our study demonstrates that FI-TAP2+Cx-HA exhibits a more than threefold longer lifetime in the joint cavity compared to FI-TAP2 alone. Furthermore, we found that TAP2 binds to TLR4 and masks the nuclear localization signals of NF-κB, leading to its sequestration in an inactive state in the cytoplasm. In a rat model of RA, TAP2+Cx-HA effectively suppresses inflammatory molecules, specifically TNF-α and IL-6, while upregulating the anti-inflammatory cytokine IL-10 and the therapeutic protein 14-3-3ζ. This resulted in faster regeneration of cartilage thickness, increased glycosaminoglycan deposits in the regenerated cartilage, and a twofold increase in new bone tissue formation compared to a single TAP2 treatment.

Evaluation the injectability of injectable microparticle delivery systems on the basis of injection force and discharged rate

BACKGROUND

Subcutaneous injection of biopharmaceutical agents or microparticles is challenging due to issues with low injection efficiency and high residual amounts.

OBJECTIVE

This study aimed to determine the important factors affecting the injectability of microparticle delivery systems, establish a suitable injection system with lower injection force and higher discharge rate, and eventually develop a reliable injectability evaluation system for injectable microparticle delivery systems in vitro and in vivo.

METHODS

The effects of various parameters, including particle size, injection speed, concentration of microspheres suspension, vehicle viscosity, needle length and gauge were evaluated by measuring the injection force and discharge rate. The characteristics of microparticles and rheological measurement of the suspension systems were studied. A design of experiment approach was utilized to evaluate the interaction between the microsphere suspension, vehicle viscosity and needle gauges. Both in vitro sieve tests and in vivo tests in rats were conducted to evaluate injectability.

RESULTS

The in vitro test results showed that the vehicle viscosity and injection speed have varying effects on discharge rate and injection force, respectively. Particle size and needle gauge have substantial influence on injectability, larger particle size and smaller needle gauges resulting in poor injectability, while the needle gauge was found to have the greatest influence on injectability. Levonorgestrel (LNG) microsphere and glass bead were relatively uniform spherical, the glass bead had extremely smooth surface; while mesoporous silica had irregular shape. The settling rate of glass bead was the fastest, which was about 18 times faster than the LNG microsphere. The CMC-Na had a poor interaction with the LNG microspheres, glass bead and mesoporous silica and showed basically Newtonian behavior in the shear rate range of 0.1 s-1-100 s-1. When shear rate increased to more than 100 s-1, no obvious shear thinning behavior was observed. CMC-Na formed a nodule structure with whether LNG microspheres or the glass beads, which were much lower than that with the mesoporous silica in static state, among which the glass beads were the weakest. The viscosity of the suspension increased with the rising of the volume fraction of particles. Fundamentals of hydrodynamics in capillaries were referenced, such as Navier-Stokes Law equation, Krieger-Dougherty (K-D) equation, Hagen-Poiseuille equation. The best results achieved was using a suspension concentration of 120-240 mg /mL and a viscosity of 60 cP at 20 °C with 23-gauge needles. The optimized conditions were verified in vivo tests. It was proven that the LNG microsphere suspension had a good injectability when injected into subcutaneous tissue of rats.

CONCLUSION

The injection system of injectable microparticle delivery system with lower injection force and higher discharge rate was established and the evaluation method was suitable for the injectability evaluation both in vivo and in vitro. Improved injectability would promote the clinical translation of microparticle delivery systems.

MRI-visible mesoporous polydopamine nanoparticles with enhanced antioxidant capacity for osteoarthritis therapy

Since the progression of osteoarthritis (OA) is closely associated with synovitis and cartilage destruction, the inhibition of inflammatory responses in synovial macrophages and reactive oxygen species (ROS) induced apoptosis in chondrocytes is crucial for OA amelioration. However, most of the current anti-inflammatory and antioxidant drugs are small molecules apt to be eliminated in vivo. Herein, mesoporous polydopamine nanoparticles (DAMM NPs) doped with arginine and manganese (Mn) ions were prepared to load dexamethasone (DEX) for OA intervention. A series of in vitro studies showed that the sustained release of DEX from DAMM NPs suppressed synovial inflammation and simultaneously inhibited toll-like receptor 3 (TLR-3) production in chondrocytes, contributing to prevention of chondrocyte apoptosis through the inflammatory factor-dependent TLR-3/NF-κB signaling pathway via modulation of macrophage-chondrocyte crosstalk. In addition, DAMM NPs exerted a predominant role in removal of ROS generated in chondrocytes. Therefore, the DEX-loaded DAMM NPs significantly attenuated OA development in mice model. Importantly, the T1-T2 magnetic contrast capabilities of DAMM NPs allowed an MRI-trackable delivery, manifesting a distinct feature widely regarded to boost the potential of nanomedicines for clinical applications. Together, our developed antioxidant-enhanced DAMM NPs with MRI-visible signals may serve as a novel multifunctional nanocarriers for prevention of OA progression.