Synthesis of bismuth molybdate photocatalysts for CO2 photo-reduction

Pt-Cu@Bi2MoO6/TiO2 Photocatalyst for CO2 Reduction

Bi2MoO6/TiO2 heterojunction photocatalysts were constructed by depositing Bi2MoO6 nanosheets on TiO2 nanobelts' surface using a solvothermal method, and the surface of the optimum Bi2MoO6/TiO2 composite was decorated with copper and/or platinum nanoparticles. The synthesized samples were investigated for the CO2 photocatalytic reduction. The structural and optical properties of synthesized photocatalysts were characterized by XRD, FESEM, EDX, N2-physisorption, Raman, TPD-CO2, DRS, and PL analysis. The Bi2MoO6/TiO2 composite with different molar ratios of Bi2MoO6 to TiO2 (1, 1/2, 1/3, 1/4, 1/5, and 1/6) showed enhanced photocatalytic activity compared to pure Bi2MoO6 and TiO2. In comparison to bulk Bi2MoO6 and TiO2, the formation of a heterojunction between Bi2MoO6 and TiO2 leads to enhanced CO2 adsorption capacity. The enhanced performance of composites can be ascribed to the improved efficiency of light harvesting in the visible light range and suppressing charge recombination. The composite photocatalytic activity indicated that the ratio of Bi2MoO6 to TiO2 in the composite samples influenced the photocatalytic performance. The Bi2MoO6/TiO2 composite with 1/4 molar ratio had the best performance in 8 h (36.4 μmol/gcat), which was about 10 and 3 times higher than TiO2 and Bi2MoO6 photocatalysts, respectively. Under UV-visible light irradiation, the Pt-Cu@BMT4 sample produced the highest amount of methane (83.6 μmol/gcat) during CO2 photoreduction. During four irradiation cycles, the Pt-Cu@BMT4 sample exhibited superior stability with less than 5% decrease in methane production.

Fabrication of g-C3N4@N-doped Bi2MoO6 heterostructure for enhanced visible-light-driven photocatalytic degradation of tetracycline pollutant

An effective catalyst for the removal of antibiotic pollutants which severely impact water bodies and the environment is most favorable. In this study, g-C3N4 (gCN) and nitrogen-doped Bi2MoO6 (gCN-NBM) heterostructures are developed using a solvothermal process with enhanced photocatalytic degradation of tetracycline (TC) pollutants under visible-light irradiation. The experimental results confirm that nitrogen-doped Bi2MoO6 (NBM) nanomaterials were dispersed on the gCN surface, and a close combination of NBM and gCN leads to the efficient photocatalytic performance of TC. The photocatalytic efficiency of the heterostructure catalysts is four-fold higher than those of the pristine Bi2MoO6 catalysts owing to the excellent photogenerated charge separation and reduced recombination rate. Photocurrent measurements and electrochemical impedance spectra results disclose that the prepared heterostructure catalysts exhibit efficient photo-induced charge transfer. The electron spin resonance spectra and quenching experiments results reveal that superoxide radicals (.O2-) play a major role in TC degradation. This study presents a promising approach for designing efficient visible-light photocatalysts for environmental remediation applications.

Pressure-dependence Raman spectroscopy and the lattice dynamic calculations of Bi2(MoO4)3 crystal

This work reports a pressure-dependent Raman spectroscopic study and the theoretical lattice dynamics calculations of a Bi₂(MoO₄)₃ crystal. The lattice dynamics calculations were performed, based on a rigid ion model, to understand the vibrational properties of the Bi₂(MoO₄)₃ system and to assign the experimental Raman modes under ambient conditions. The calculated vibrational properties were helpful to support pressure-dependent Raman results, including eventual structural changes induced by pressure changes. Raman spectra were measured in the spectral region between 20 and 1000 cm^-1 and the evolution of the pressures values was recorded in the range of 0.1-14.7 GPa. Pressure-dependent Raman spectra showed changes observed at 2.6, 4.9 and 9.2 GPa, these changes being associated with structural phase transformations. Finally, principal component analysis (PCA) and hierarchical cluster analysis (HCA) were performed to infer the critical pressure of phase transformations undergone by the Bi₂(MoO₄)₃ crystal.

Enhancing Visible Light Photocatalytic Degradation of Bisphenol A Using BiOI/Bi2MoO6 Heterostructures

With the growing population, access to clean water is one of the 21st-century world's challenges. For this reason, different strategies to reduce pollutants in water using renewable energy sources should be exploited. Photocatalysts with extended visible light harvesting are an interesting route to degrade harmful molecules utilized in plastics, as is the case of Bisphenol A (BPA). This work uses a microwave-assisted route for the synthesis of two photocatalysts (BiOI and Bi₂MoO₆). Then, BiOI/Bi₂MoO₆ heterostructures of varied ratios were produced using the same synthetic routes. The BiOI/Bi₂MoO₆ with a flower-like shape exhibited high photocatalytic activity for BPA degradation compared to the individual BiOI and Bi₂MoO₆. The high photocatalytic activity was attributed to the matching electronic band structures and the interfacial contact between BiOI and Bi₂MoO₆, which could enhance the separation of photo-generated charges. Electrochemical, optical, structural, and chemical characterization demonstrated that it forms a BiOI/Bi₂MoO₆ p-n heterojunction. The free radical scavenging studies showed that superoxide radicals (O₂•^-) and holes (h⁺) were the main reactive species, while hydroxyl radical (•OH) generation was negligible during the photocatalytic degradation of BPA. The results can potentiate the application of the microwave synthesis of photocatalytic materials.

Construction lamellar BaFe12O19/Bi3.64Mo0.36O6.55 photocatalyst for enhanced photocatalytic activity via a photo-Fenton-like Mo6+/Mo4+redox cycle

The novel BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 composite materials were constructed as magnetically recyclable photo-Fenton-like degradation systems. The composite catalyst not only promoted the effective transfer of photo-generated electrons and improved the Mo⁶⁺/Mo⁴⁺ cycle consequent, but also activated hydrogen peroxide to generate oxidizing free radicals. BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55-0.25 exhibited an outstanding degradation performance for tetracycline hydrochloride it is 1.3 times to Bi_3.64Mo_0.36O_6.55. The thermal catalytic performance of the Bi_3.64Mo_0.36O_6.55 monomer is similar to that of the BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material without light. However, the removal rate of BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 material reaches 84.5% after 60 min with light, far exceeding that of Bi_3.64Mo_0.36O_6.55 material. By way of the contrast experiment with light and without light, it is further demonstrated that interfacial interaction between BaFe₁₂O₁₉ and Bi_3.64Mo_0.36O_6.55 acted a key role in the photocatalytic reaction system. It is also a good advantage that pollutants can be efficiently degraded without adjusting the pH. The characterization of photocurrent and X-ray photoelectron spectroscopy (XPS) also further proved the synergy between the two materials, which is useful to the separation of electrons and holes. The synergy ultimately improves the degradation performance. Besides, BaFe₁₂O₁₉/Bi_3.64Mo_0.36O_6.55 can be easily separated by an external magnetic field after the photocatalytic activity reaction owing to BaFe₁₂O₁₉'s magnetic properties. It provides a new research idea for the construction and iron-based heterogeneous Fenton-like system for magnetic degradation of antibiotics.

Performance comparison of distinct bismuth molybdate single phases for asymmetric supercapacitor applications

The enticing features of metal molybdates make them an attractive candidate for energy storage systems. This report describes the synthesis of three distinct single-phase bismuth molybdates (Bi₂Mo_xO_y; α-Bi₂Mo₃O₁₂, β-Bi₂Mo₂O₉, and γ-Bi₂MoO₆) using the gel matrix particle growth method and their application in high-performance asymmetric supercapacitors. The single phase and purity of the synthesized Bi₂Mo_xO_y particles were confirmed by X-ray diffraction (XRD) and further verified by Raman analysis. The UV-visible spectra show the electronic and optical behaviours of the as-synthesized α, β, and γ Bi₂Mo_xO_y. The morphologies of the as-synthesized three different Bi₂Mo_xO_y phases were analysed using scanning electron microscopy (SEM). The particle formation was further investigated by transmission electron microscopy (TEM), and the interplanar spacings of the Bi₂Mo_xO_y phases were in accordance with the planes. The surface area and pore volume of the prepared samples were analysed using Brunauer-Emmett-Teller (BET) analysis. The electrochemical properties of the products were confirmed by various tests, including cyclic voltammetry (CV), galvanostatic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) in 3 M KOH. Among the three phases, α-Bi₂Mo₃O₁₂ exhibits a huge specific capacitance (Cs) of 714 F g^-1 at a current density of 1 A g^-1. Furthermore, it displays an admirable cycling stability of 86.55% after 5000 cycles. The chosen α-Bi₂Mo₃O₁₂ electrode possesses an increased energy density of 47.5 W h kg^-1 at 1 A g^-1 with a capacitive retention rate of 71.90% at 5 A g^-1 after 10 000 cycles. A remarkable electrochemical performance of Bi₂Mo₃O₁₂ with an exceptional power density of 750 W kg^-1 was observed for the prepared asymmetric device. Bismuth molybdate's notable performance indicates that it can be an active material for energy storage applications.

Superoxide anion and singlet oxygen dominated faster photocatalytic elimination of nitric oxide over defective bismuth molybdates heterojunctions

Establishing an ideal photocatalytic system with efficient reactive oxygen species (ROS) generation has been regarded as the linchpin for realizing efficient nitric oxide (NO) removal and unveiling the ROS-mediated mechanism. In this work, a novel oxygen-deficient 0D/1D Bi_3.64Mo_0.36O_6.55/Bi₂MoO₆ heterojunctions (BMO-12-H) were successfully synthesized under the enlightenment of clarified crystal growth mechanism of bismuth molybdates. Because of the synergies between defect-engineering and heterojunction-construction, BMO-12-H demonstrated improved photoelectrochemical properties and O₂ adsorption capacity, which in turn facilitated the ROS generation and conversion. The enhancement of •O₂^- and ¹O₂ endowed BMO-12-H with strengthened NO removal efficiency (59%) with a rate constant of 12.6*10^-2 min^-1. A conceivable NO removal mechanism dominated by •O₂^- and ¹O₂ was proposed and verified based on the theoretical calculations and in-situ infrared spectroscopy tests, where hazardous NO was oxidized following two different exothermic pathways: the •O₂^--induced NO → NO₃^- process and the ¹O₂-induced NO → NO₂ → NO₃^- process. This work offers a basic guideline for accelerating ROS generation by integrating defect-engineering and heterojunction-construction, and provides new insights into the mechanism of efficient NO removal dominated by •O₂^- and ¹O₂.

Photocatalytic Degradation of Orange G Dye by Using Bismuth Molybdate: Photocatalysis Optimization and Modeling via Definitive Screening Designs

In the current study, Bismuth molybdate was synthesized using simple co-precipitation procedure, and their characterization was carried out by various methods such as FT-IR, SEM, and P-XRD. Furthermore, the photocatalytic degradation of Orange G (ORG) dye using synthesized catalyst under visible light irradiation was studied. Response surface Method was used for the optimization of process variables and degradation kinetics evaluated by modeling of experimental data. Based on the experimental design outcomes, the first-order model was proven as a practical correlation between selected factors and response. Further ANOVA analysis has revealed that only two out of six factors have a significant effect on ORG degradation, however ORG concentration and irradiation time indicated the significant effects sequentially. Maximum ORG degradation of approximately 96% was achieved by keeping process parameters in range, such as 1 g L-1 loading of catalyst, 50 mg L-1 concentration of ORG, 1.4 mol L-1 concentration of H2O2 at pH 7 and a temperature of 30 °C. Kinetics of ORG degradation followed the pseudo first order, and almost complete degradation was achieved within 8 h. The effectiveness of the Bi2MoO6/H2O2 photo-Fenton system in degradation reactions is due to the higher number of photo-generated e- available on the catalyst surface as a result of their ability to inhibit recombination of e- and h+ pair.

Highly Selective Production of Ethanol Over Hierarchical Bi@Bi2 MoO6 Composite via Bicarbonate-Assisted Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction is a sustainable and inexpensive method to solve the energy crisis and the greenhouse effect. However, the major stumbling blocks such as poor product selectivity, low yield of the multi-carbon products, and serious recombination of electron-hole pairs hinder practical application of photocatalysts. Herein, a high-performance Bi@Bi₂ MoO₆ photocatalyst, Bi nanoparticles grown on the surface of Bi₂ MoO₆ nanosheets with oxygen vacancies, was fabricated via a simple solvothermal approach. Benefiting from the abundant active sites and effective separation of photogenerated carriers of Bi₂ MoO₆ nanosheets, and the localized surface plasmon resonance effect of Bi nanoparticles, the Bi@Bi₂ MoO₆ sample exhibited great photocatalytic CO₂ reduction activity. Furthermore, adding NaHCO₃ into the system not only significantly increased the C₂ H₅ OH generation rate but also enhanced the product selectivity. In the photocatalytic measurement (0.17 mol L^-1 CO₂ -saturated NaHCO₃ solution), the highest formation rates of CO, CH₃ OH, and C₂ H₅ OH were reached at 0.85, 0.59, and 17.93 μmol g^-1  h^-1 (≈92 % selectivity), respectively.

Enhanced photocatalytic activity of Bi2WO6 with PVP addition for CO2 reduction into ethanol under visible light

The conversion of CO₂ into new carbon-based products, such as fuels and chemicals, is an attractive and promising means of mitigating global energy needs and minimizing environmental damage. Although bismuth tungstate (Bi₂WO₆) as a photocatalyst can promote CO₂ photoreduction, a systematic study for the development of a low-cost and efficient catalyst is needed. Thus, Bi₂WO₆ with different morphologies was successfully synthesized using the hydrothermal method. An experimental design was applied to investigate the effect of synthesis time and PVP (polyvinylpyrrolidone) concentration on catalyst photocatalytic activity. Crystal structures, morphologies, optical absorption, and surface charges of the catalysts were characterized by X-ray diffraction, scanning electron microscope, UV-vis diffuse-reflection spectroscopy, nitrogen adsorption, and zeta potential. All samples exhibited good performance for the photoreduction of CO₂ into ethanol, and both time and PVP concentration were significant in the ethanol yield. Changes in synthesis conditions induced differences in catalyst characteristics, such as morphology, crystallinity, and, predominantly, surface area. Furthermore, PVP addition improved photocatalytic efficiency by up to 258% compared with results without the surfactant. The best sample, W-8h-10%, presented a flower-like morphology and ethanol yield of 68.9 μmol g^-1 h^-1.

Bismuth molybdate incorporated functionalized carbon nanofiber as an electrocatalytic tool for the pinpoint detection of organic pollutant in life samples

Herein, we fabricated a feasible and accurate sensing platform for the quantification of toxic organic pollutant 2-nitroaniline (2-NA) in water samples through electrocatalyst made up of bismuth molybdate (Bi₂MoO₆, BMO) functionalized carbon nanofiber (f-CNF) modified electrode. The preparation of BMO/f-CNF composite is of two methods, such as co-precipitation (C-BMO/f-CNF) and ultrasonication method (U-BMO/f-CNF). The physicochemical properties of the composites were characterized by XRD, FTIR, Raman, BET, FE-SEM, and HR-TEM techniques. At U-BMO/f-CNF, the charge transfer resistance was low (R_ct = 12.47 Ω) compared to C-BMO/f-CNF because nanosized U-BMO particles correctly aim at the defective sites of the f-CNF surface wall. Further, the electrocatalytic activity of C&U-BMO/f-CNF composites was examined by cyclic voltammetry (CV) and differential pulse voltammetry techniques (DPV) for the electrochemical detection of 2-nitroaniline (2-NA). The U-BMO/f-CNF/GCE shows a higher cathodic current, wide dynamic linear range of 0.01-168.01 µM, and superior electrocatalytic activity with a low detection limit (0.0437 µM) and good sensitivity (0.6857 μA μM^-1 cm^-2). The excellent selectivity nature of U-BMO/f-CNF/GCE was observed in the presence of various organic pollutants and a few toxic metal cations. The practical applicability such as stability, repeatability towards 2-NA outcomes with accepted results. Besides, the practical viability of as proposed U-BMO/f-CNF sensor was investigated in soil and lake water samples delivers good recovery results. Hence from these analyses, we conclude that U-BMO/f-CNF/GCE potential for the determination of hazardous environmental pollutant 2-NA.

Innovative and Cost-Efficient BiOI Immobilization Technique on Ceramic Paper-Total Coverage and High Photocatalytic Activity

In the present work, visible light active bismuth oxyiodide (BiOI) was immobilized on a commercial, non-conductive support (an Al2O3 based ceramic paper) using a novel two-step spray coating technique and investigated with different characterization methods (e.g., SEM, Raman, XPS). Our main goal was to eliminate the separation costs after the photocatalytic measurement and investigate the chemical relevance and opportunity to use this technique in the industry. Our as-prepared uniform BiOI layer had similar properties to the well-known reference BiOI powder. The Raman and XPS measurements confirmed that the enriched amount of the surface iodine defined the color and as well the band gap of the BiOI layer. The durable BiOI layers have prominent photocatalytic activity under UV and visible light irradiation as well. The scale-up procedure proved that the designed BiOI coated paper was reusable and potentially applicable in the industry by straightforward scale-up, which is due to the elaborated non-conventional BiOI coverage estimation method. This immobilization technique could open several opportunities for immobilizing many other visible light active photocatalysts with simple materials and low cost.

Nitrogen photofixation ability of g-C3N4 nanosheets/Bi2MoO6 heterojunction photocatalyst under visible-light illumination

In this study, we combined bismuth molybdate with graphitic carbon nitride nanosheets with different percentages of 10%, 20%, 30%, and 40%, in which noticeable N₂ photoreduction under visible-light illumination was seen for the binary g-C₃N₄ nanosheets/Bi₂MoO₆ photocatalysts, denoted as NCN/BMO. The XPS, HRTEM, TEM, XRD, EDX, UV-vis DRS, N₂ adsorption-desorption, FT-IR, TGA, PL, photocurrent, and EIS instruments were utilized to characterize the fabricated photocatalysts. The results displayed the construction of type-II heterojunction between the NCN and BMO components for the easy charge transfer. Under mild conditions and using ethanol as a hole scavenger, the NCN/BMO (30%) nanocomposite showed the maximum capability for ammonia generation by 3271 µmol/L g, which is 1.9 and 9.2 times higher than the NCN and BMO components, respectively. The effects of solvent type, pH of solution, and electron scavenger on the rate of NH₄⁺ production were also studied and conversed. Finally, the stability of the NCN/BMO (30%) nanocomposite was evaluated for four cycles, in which the results were desirable.